顔写真

PHOTO

Nomura Kazufumi
野村 和史
Nomura Kazufumi
野村 和史
Graduate School of Engineering Division of Materials and Manufacturing Science, Associate Professor

Research History 5

  1. 2024/04 - Present
    Graduate School of Engineering, Osaka University Division of Materials and Manufacturing Science

  2. 2021/09 - 2024/03
    Graduate School of Engineering, Osaka University Division of Materials and Manufacturing Science

  3. 2010/04 - 2021/08
    Division of Materials and Manufacturing Science Graduate School of Engineering, Osaka University Assistant Professor

  4. 2009/04 - 2010/03
    株式会社小松製作所

  5. 2007/04 - 2009/03
    Graduate School of Engineering, Osaka University Assistant Professor

Education 3

  1. Osaka University Graduate School, Division of Engineering

    - 2007/03

  2. Osaka University Graduate School, Division of Engineering

    - 2004/03

  3. Osaka University Faculty of Engineering

    - 2002/03

Committee Memberships 14

  1. 軽金属溶接協会 レーザ溶接委員会 委員 Academic society

    2025/04 - 2027/03

  2. 溶接協会 第39期学識会員 Academic society

    2024/10 - 2026/09

  3. 溶接協会 第13期JANB(IIW資格日本認証機構)AM試験員 Academic society

    2024/04 - 2026/03

  4. 溶接学会 2024・2025年度 溶接学会編集委員会 委員 Academic society

    2025/04 - 2026/02

  5. 溶接学会 2024・2025年度 論文査読・審査委員会 委員 Academic society

    2024/07 - 2026/02

  6. 溶接学会 2024・2025年度 全国大会運営委員会 委員 Academic society

    2024/07 - 2026/02

  7. 溶接学会 2024・2025年度 溶接法研究委員会 幹事 Academic society

    2024/03 - 2026/02

  8. 溶接協会 第38期学識会員 Academic society

    2022/10 - 2024/09

  9. 日本非破壊検査協会 先進センシング技術とデータ処理に関する萌芽研究会 委員 Academic society

    2022/10 - 2024/03

  10. 溶接学会 2022・2023年度 全国大会運営委員会 委員 Academic society

    2022/07 - 2024/02

  11. 溶接学会 2022・2023年度 論文査読・審査委員会 委員 Academic society

    2022/07 - 2024/02

  12. 溶接学会 2022・2023年度 溶接法研究委員会 幹事 Academic society

    2022/03 - 2024/02

  13. 溶接学会 2020・2021年度 論文査読・審査委員会 委員 Academic society

    2020/07 - 2022/02

  14. レーザ加工学会 第96回レーザ加工学会 オンライン実行委員 Academic society

    2022/01 - 2022/01

Professional Memberships 3

  1. 日本非破壊検査協会

  2. レーザー加工学会

  3. 溶接学会

Research Areas 2

  1. Nanotechnology/Materials / Material fabrication and microstructure control /

  2. Manufacturing technology (mechanical, electrical/electronic, chemical engineering) / Manufacturing and production engineering /

Awards 21

  1. Technology and Physics of Welding Promising Award 2023

    Tomoya Imai, Takeshi Monodane, Kazufumi Nomura 2024/08

  2. 日本溶接協会賞技術賞開発奨励賞

    門田圭二, 新田誠也, 惠良哲生, 野村和史, 浅井知 (一社)日本溶接協会 2024/06

  3. 2023年度(第72回) 電機工業技術功績者表彰

    K. Kadota, S. Nitta, K. Nomura JEMA 2023/10

  4. 新進賞

    S. Mishima, K. Nomura, T. Sano 2023/01

  5. 溶接アーク物理研究賞

    2022/08

  6. 新進賞

    出野 壮士, 大滝 悟嗣, 松井田 丈斗, 野村 和史, 佐野 智一, 浅井 知 (一社)日本非破壊検査協会 2021/01

  7. Best Review Paper Award

    Kazufumi Nomura, Yoshinori Hirata, Satoru Asai Smart Processing Society 2020/11

  8. 溶接物理・技術奨励賞

    2020/08

  9. 学術奨励賞

    S. Otaki, R. Kita, K. Nomura, S. Asai 2020/06

  10. Best industrial Award

    Satoru Asai, Yousuke Ogino, Kazufumi Nomura, Kazunori Hattori the Ineternational Conference on Progress in Digital and Physical Manufacturing 2019/10

  11. 平成28年度溶接アーク物理研究賞

    野村和史, 戸田要, 吉井嘉一郎, 三村晃平, 平田好則, 浅井知 一般社団法人溶接学会 溶接法研究委員会 2017/08

  12. 講演奨励賞

    野村和史 (一社)溶接学会 軽構造接合加工研究委員会 2017/06

  13. 講演奨励賞

    戸田 要, 吉井 嘉一郎, 野村 和史, 三村 晃平, 平田 好則, 浅井 知 社団法人プラズマ・核融合学会 九州・沖縄・山口支部 2017/03

  14. ポスター賞

    井村文哉, 峰憂, 喜多亮右, 野村和史, 浅井知, 星岳志 一般社団法人日本非破壊検査協会 2017/01

  15. 平成25年度溶接学会論文奨励賞

    野村和史 一般社団法人溶接学会 2014/04

  16. 溶接物理・技術奨励賞

    荻野陽輔, 河田純一, 平田好則, 野村和史 一般社団法人溶接学会 2013/11

  17. 第5回優秀ポスター賞

    野村和史 グローバルCOEプログラム「構造・機能先進材料デザイン教育研究拠点」 2012/03

  18. 溶接物理・技術奨励賞

    荻野陽輔, 野村和史, 平田好則 社団法人 溶接学会 2010/08

  19. 平成21年度溶接学会論文賞

    野村和史, 荻野陽輔, 平田好則 社団法人 溶接学会 2010/04

  20. 平成20年度溶接学会研究発表賞

    野村和史 社団法人 溶接学会 2009/04

  21. 平成19年度溶接アーク物理研究賞

    野村和史, 森崎和之, 平田好則 (社)溶接学会溶接アーク物理研究委員会 2008/11

Papers 104

  1. WAAM材欠陥その場検出のためのレーザ超音波法を用いた計測技術の開発

    K. Nomura

    Welding Technology Vol. 75 No. 2 p. 96-97 2025/02

  2. 溶接プロセスにおけるAI活用事例と今後の展望

    K. Nomura

    Welding Technology Vol. 73 No. 2 p. 68-72 2025/02

  3. Development of Robotic System for Internal Diagnosis of Sheet Joints by Laser Ultrasonic Technique

    Seiya NITTA, Keiji KADOTA, Kazufumi NOMURA, Tetsuo ERA, Satoru ASAI

    JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 94 No. 1 p. 39-44 2025/01 Research paper (scientific journal)

    Publisher: Japan Welding Society
  4. Effect of current waveform in MIG arc on weld bead formation in plasma-MIG hybrid welding

    Kazuya Ishida, Shinichi Tashiro, Kazufumi Nomura, Dongsheng Wu, Anthony B. Murphy, Toshifumi Yuji, Manabu Tanaka

    The International Journal of Advanced Manufacturing Technology Vol. 133 No. 1-2 p. 811-820 2024/05/24 Research paper (scientific journal)

    Publisher: Springer Science and Business Media LLC
  5. 薄板溶接継手品質のレーザ超音波計測とそのロボットシステムの開発

    Kazufumi NOMURA

    Advances in Nondestructive Testing and Materials Evaluation Technologies Using Ultrasonic Waves p. 278-283 2024/03/29

  6. レーザ超音波を用いた抵抗スポット溶接ナゲット径の非接触計測

    Kazufumi NOMURA

    Advances in Nondestructive Testing and Materials Evaluation Technologies Using Ultrasonic Waves p. 309-314 2024/03/29

  7. Development of Dynamic Laser Ultrasonic System Using Microchip Laser Mounted on a Robot Arm

    K. Nomura, N. Okuyama, T. Inoue, T. Sano

    Journal of smart processing Vol. 13 No. 2 p. 75-81 2024/03/10 Research paper (scientific journal)

  8. Development of Laser Ultrasonic Robotic System for Internal Flaw Detection of Sheet Joints

    S. Nitta, K. Kadota, K. Nomura, T. Era, S. Asai

    Inspection Engineering Vol. 29 No. 2 p. 63-68 2024/02/01

  9. 干渉フィルタを用いた発光分光計測における各種校正法

    Kazufumi NOMURA

    JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 92 No. 8 p. 558-562 2023/12/10

    Publisher: Japan Welding Society
  10. Study on Detecting Method of Internal Defects by Laser Ultrasonics in Lap Joint Welding of Galvanized Steel Sheet and Finite Element Analysis of Its Detectability

    Norimitsu Okuyama, Kazufumi Nomura, Tomokazu Sano, Keiji Kadota, Seiya Nitta, Tetsuo Era, Satoru Asai

    Applied Sciences Vol. 13 No. 20 p. 11515-11515 2023/10/20 Research paper (scientific journal)

    Publisher: MDPI AG
  11. Study on non-contact measurement method of resistance spot weld nugget diameter using laser ultrasonic technique

    Kazufumi Nomura, Shintaro Mishima, Soshi Deno, Tomokazu Sano

    NDT & E International Vol. 140 p. 102973-102973 2023/10 Research paper (scientific journal)

    Publisher: Elsevier BV
  12. レーザ超音波法による薄板溶接部の内部診断ロボットシステムの開発

    K. Kadota, S. Nitta, K. Nomura, S. Asai

    Welding Technology Vol. 71 No. 10 2023/09

  13. Recent Progresses and Future Prospects of Science and Technology in Welding Process

    Yosuke OGINO, Kazufumi NOMURA, Hisaya KOMEN, Houichi KITANO, Manabu TANAKA

    JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 92 No. 5 p. 309-319 2023/07 Research paper (scientific journal)

    Publisher: Japan Welding Society
  14. ギャップ変動を伴うガスメタルアーク溶接の溶融池モニタリングと深層学習モデルによる溶落ち予測と溶込み深さ推定

    K. Nomura

    2023/03

  15. Study on Blowhole Detection in Fillet Welded Sheet of Lap Joint by Laser Ultrasonic Technique

    Kazufumi NOMURA, Taketo MATSUIDA, Keiji KADOTA, Tetsuo ERA, Satoru ASAI

    QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 41 No. 1 p. 141-149 2023/02 Research paper (scientific journal)

    Publisher: Japan Welding Society
  16. レーザ超音波による薄板溶接継手品質の非接触計測とロボットシステム化

    野村 和史, 浅井 知

    非破壊検査 Vol. 72 No. 2 p. 48-52 2023/02

  17. Dynamic keyhole behaviors and element mixing in paraxial hybrid plasma-MIG welding with a gap

    Dongsheng Wu, Kazuya Ishida, Shinichi Tashiro, Kazufumi Nomura, Xueming Hua, Ninshu Ma, Manabu Tanaka

    International Journal of Heat and Mass Transfer Vol. 200 p. 123551-123551 2023/01 Research paper (scientific journal)

    Publisher: Elsevier BV
  18. 浪速博士の溶接がってん!R コミック! AIで溶接の自動化ができる?の巻

    Kazufumi Nomura

    WE-COMマガジン Vol. 46 2022/09

  19. In situ measurement of ultrasonic behavior during lap spot welding with laser ultrasonic method

    Kazufumi Nomura, Soshi Deno, Taketo Matsuida, Satoshi Otaki, Satoru Asai

    NDT & E International Vol. 130 p. 102662-102662 2022/09 Research paper (scientific journal)

    Publisher: Elsevier BV
  20. Study on defect detection during welding process by laser ultrasonic technique

    Kazufumi Nomura, Satoru Asai

    OPTRONICS No. 488 p. 73-78 2022/08/10

  21. Fundamental study of the quality measurement for wire arc additive manufacturing process by laser ultrasonic technique

    Kazufumi Nomura, Taketo Matsuida, Satoshi Otaki, Satoru Asai

    Welding in the World Vol. 66 p. 2271-2280 2022/07/22 Research paper (scientific journal)

    Publisher: Springer Science and Business Media LLC
  22. A Study on Stable Weld Bead Formation Mechanism During Laser-arc Hybrid Welding

    Shohei IWATA, Satoshi IGI, Yasushi KITANI, Kazufumi NOMURA, Satoru ASAI

    QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 40 No. 2 p. 114-121 2022/06 Research paper (scientific journal)

    Publisher: Japan Welding Society
  23. Simultaneous multipoint emissivity measurement via Zebra-patterned blackbody spray method and application to gas tungsten arc welding process

    Kazufumi Nomura, Hiroyuki Okuda, Tomokazu Sano, Satoru Asai

    Journal of Manufacturing Processes Vol. 78 p. 22-31 2022/06 Research paper (scientific journal)

    Publisher: Elsevier BV
  24. Elucidation of arc coupling mechanism in plasma-MIG hybrid welding process through spectroscopic measurement of 3D distributions of plasma temperature and iron vapor concentration

    Kazuya Ishida, Shinichi Tashiro, Kazufumi Nomura, Dongsheng Wu, Manabu Tanaka

    Journal of Manufacturing Processes Vol. 77 p. 743-753 2022/05 Research paper (scientific journal)

    Publisher: Elsevier BV
  25. Application of multi-spectral camera for biomedical use to two-color temperature measurement in welding phenomena

    Kazufumi NOMURA, Hiroyuki OKUDA, Tomokazu SANO

    QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 39 No. 4 p. 241-247 2021/12 Research paper (scientific journal)

    Publisher: Japan Welding Society
  26. Study on Weld Depth Estimation by Molten Pool Monitoring and Deep Learning Model in MAG Welding Process

    Kazufumi NOMURA, Takumi MATSUMURA, Satoru ASAI

    JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 90 No. 8 p. 551-555 2021/12 Research paper (scientific journal)

    Publisher: Japan Welding Society
  27. In-process monitoring of welding quality by robotic laser ultrasonic measurement system using microchip laser

    Taketo MATSUIDA, Satoshi OTAKI, Kazufumi NOMURA, Satoru ASAI

    Quarterly Journal of the Japan Welding Society Vol. 39 No. 1 p. 11-23 2021/01/01 Research paper (scientific journal)

  28. Burn-through prediction and weld depth estimation by deep learning model monitoring the molten pool in gas metal arc welding with gap fluctuation

    Kazufumi Nomura, Koki Fukushima, Takumi Matsumura, Satoru Asai

    Journal of Manufacturing Processes Vol. 61 p. 590-600 2021/01/01 Research paper (scientific journal)

    Publisher: Elsevier
  29. アーク溶接における表面温度情報を用いた溶込み推定手法の提案

    K. Nomura

    Welding technology Vol. 68 No. 11 p. 116-117 2020/11 Research paper (other academic)

  30. Inspection and Monitoring of Weld Using Laser Ultrasonics

    Satoru Asai, Kazufumi Nomura

    Inspection Engineering Vol. 25 No. 10 p. 60-66 2020/10/01

  31. Study of burn-through prediction in arc welding using molten pool monitoring technique

    K. Nomura, T. Matsumura, S. Asai

    Image Laboratory Vol. 31 No. 9 p. 54-59 2020/09/01

  32. Recent Progresses of Welding and Joining Engineering

    Satoru ASAI, Fumikazu MIYASAKA, Kazufumi NOMURA, Yosuke OGINO, Manabu TANAKA, Masaya SHIGETA, Satoshi YAMANE

    JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 89 No. 5 p. 322-335 2020/07 Research paper (scientific journal)

    Publisher: Japan Welding Society
  33. Interactive Phenomena in Hybrid KPAW-GMAW-P

    D. Wu, S. Tashiro, Z. Wu, K. Nomura, X. Hua, M. Tanaka

    Welding Journal Vol. 99 p. 146-s-155-s 2020/07 Research paper (scientific journal)

  34. Study of burn-through prediction in MAG arc welding using molten pool monitoring technique

    T. Matsumura, K. Nomura, S. Asai

    Quarterly J. Japan Welding Soc. Vol. 38 No. 3 p. 147-156 2020/07/01 Research paper (scientific journal)

    Publisher: 0
  35. In-situ detection of weld defect during the welding process by laser ultrasonic technique

    K. Nomura, S. Otaki, R. Kita, S. Asai

    Proceedings of Meetings on Acoustics Vol. 38 2020/06/01 Research paper (international conference proceedings)

    Publisher: 2019 International Congress on Ultrasonics (2019 ICU)
  36. Fundamental plasma diagnostic study for guiding TIG arc phenomenon by laser irradiation

    H. Okuda, K. Nomura, S. Asai, S. Iwata, Y. Kitani, K. Oi

    Quarterly J. Japan Welding Soc. Vol. 38 No. 2 p. 60-67 2020/05/01 Research paper (scientific journal)

    Publisher: 0
  37. Analysis of heat transfer and material flow in hybrid KPAW-GMAW process based on the novel three dimensional CFD simulation

    Dongsheng Wu, Shinichi Tashiro, Ziang Wu, Kazufumi Nomura, Xueming Hua, Manabu Tanaka

    International Journal of Heat and Mass Transfer Vol. 147 2020/02/01 Research paper (scientific journal)

    Publisher: PERGAMON-ELSEVIER SCIENCE LTD
  38. Tomographic measurement of current density and heat input density for tilting TIG arc

    Atsushi AIBE, Kazufumi NOMURA, Satoru ASAI

    Quarterly Journal of the Japan Welding Society Vol. 38 No. 1 p. 25-33 2020/02/01 Research paper (scientific journal)

  39. In-situ measurement of weld quality during MAG welding using laser ultrasonic

    Satoshi OTAKI, Taketo MATSUIDA, Kazufumi NOMURA, Fumiya IMURA, Ryosuke KITA and Satoru ASAI

    Quarterly Journal of the Japan Welding Society Vol. 38 No. 1 p. 11-18 2020/02/01 Research paper (scientific journal)

  40. Fundamental plasma diagnostic study for guiding TIG arc phenomenon by laser beam irradiation

    Hiroyuki Okuda, Kazufumi Nomura, Satoru Asai, Shohei Iwata, Yasushi Kitani, Kenji Oi

    Welding International Vol. 33 No. 1月3日 p. 63-72 2020/01/01 Research paper (scientific journal)

    Publisher: Informa UK Limited
  41. Inspection and Monitoring of Weld using Laser Ultrasonics

    Satoru ASAI, Kazufumi NOMURA

    Journal of the Japan Welding Society Vol. 89 No. 1 p. 87-94 2020/01/01

  42. Study on the on-line support system for welder

    S. Asai, Y. Ogino, K. Nomura, K. Hattori

    Proceedings of ProDPM’19 2019/10/01 Research paper (international conference proceedings)

    Publisher: International Conference on Progress in Digital and Physical Manufacturing (ProDPM’19)
  43. Analysis of the coupled interaction of arc, droplet, keyhole and weld pool in the hybrid KPAW-P-GMAW process

    Dongsheng Wu, Shinichi Tashiro, Ziang Wu, Kazufumi Nomura, Xueming Hua, Manabu Tanaka

    The 72nd IIW Annual Assembly & International Conference 2019/07/01 Research paper (international conference proceedings)

  44. レーザ超音波による溶接品質のその場計測

    浅井知, 野村和史, 大滝悟嗣, 喜多亮右

    Welding Technology Vol. 67 No. 2 p. 66-69 2019/02/01

  45. In-situ measurement of weld quality during MAG welding using laser ultrasonic

    Satoshi Otaki, Taketo Matsuida, Kazufumi Nomura, Fumiya Imura, Ryosuke Kita, Satoru Asai

    Welding International Vol. 33 No. 10-12 p. 450-459 2019 Research paper (scientific journal)

    Publisher: Taylor and Francis Ltd.
  46. Tomographic measurement of current density and heat input density for tilting TIG arc

    Atsushi Aibe, Kazufumi Nomura, Satoru Asai

    Welding International Vol. 33 No. 10-12 p. 438-449 2019 Research paper (scientific journal)

    Publisher: Taylor and Francis Ltd.
  47. Estimation of the weld penetration by the surface temperatures measurement in arc welding

    K. Nomura, S. Yamashita, F. Imura, S. Asai

    Quarterly J. Japan Welding Soc. Vol. 36 No. 4 p. 264-273 2018/11/01 Research paper (scientific journal)

  48. 3D spectroscopic measurement of argon and metal vapour in MIG welding

    K. Kataoka, K. Nomura, K. Mimura, Y. Hirata

    Welding International Vol. 32 No. 4 p. 254-263 2018/08/01 Research paper (scientific journal)

    Publisher: 0
  49. Development of the in-situ measurement of the molten pool shape during TIG welding using laser ultrasonic

    Fumiya IMURA, Ryosuke KITA, Kazufumi NOMURA, Satoru ASAI

    Quarterly J. Japan Welding Soc. Vol. 36 No. 1 p. 49-59 2018/03/01 Research paper (scientific journal)

  50. 3D spectroscopic measurement of temperature and metal vapor concentration in MIG arc plasma

    Kaname TODA, Kaichiro YOSHII, Kohei MIMURA, Kazufumi NOMURA, Yoshinori HIRATA, Satoru ASAI

    Quarterly J. Japan Welding Soc. Vol. 36 No. 1 p. 39-48 2018/03/01 Research paper (scientific journal)

  51. レーザ超音波を用いた溶融池形状のその場計測技術の検討

    浅井知, 野村和史, 井村文哉, 喜多亮右

    Ultrasonic Technology Vol. 30 No. 1 p. 12-18 2018/02/01

  52. 三次元発光分光法による溶接アークプラズマの可視化

    K.Nomura, S.Asai, Y. Hirata野村和史, 浅井知, 平田好則

    Journal of smart processing Vol. 8 No. 2 p. 46-51 2018/01/01

  53. 3D measurement of temperature and metal vapor concentration in MIG arc plasma using a multidirectional spectroscopic method

    Kazufumi Nomura, Kaichiro Yoshii, Kaname Toda, Kohei Mimura, Yoshinori Hirata, Satoru Asai

    Journal of Physics D: Applied Physics Vol. 50 No. 42 2017/09/01 Research paper (scientific journal)

  54. 20116 Trend of Welding & Joining in Japan - Technical Commission on Welding Process

    Satoru Asai, Manabu Tanaka, Satoshi Yamane, Fumikazu Miyasaka, Kazufumi Nomura

    Journal of The Japan Welding Society Vol. 86 No. 5 p. 49-58 2017/07/01

  55. 溶接熱源のモデル化とそれによる溶融池予測システムの開発

    Satoru Asai, Manabu Tanaka, Yousuke Kawahito, Masaya Shigeta, Kazufumi Nomura, Tomoki Matsuda, Yosuke Ogino

    Journal of The Japan Welding Society Vol. 86 No. 1 p. 27-31 2017/01/01

  56. アーク溶接最新研究事情―アーク溶接プロセスのモニタリングとシミュレーション―

    S.Asai, K. Nomura, Y.Ogino

    Welding Technology Vol. 64 No. 9 p. 72-77 2016/09/01

    Publisher:
  57. -

    K. Nomura

    WE-COM Magagine Vol. 22 2016/09/01

  58. Tomographic spectroscopic observation of argon and metal vapor behavior in MIG arc welding

    K. Nomura, K. Kataoka, K. Mimura, Y. Hirata, T. Kishi

    Welding in the World Vol. 60 No. 1 p. 117-125 2015/10/01 Research paper (scientific journal)

  59. 3D spectroscopic measurement of argon and metal vapor in MIG welding

    Kotaro KATAOKA, Kazufumi NOMURA, Kohei MIMURA, Yoshinori HIRATA

    QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 33 No. 3 p. 233-241 2015/09/01 Research paper (scientific journal)

    Publisher: Japan Welding Society
  60. Study on temperature measurement of two-electrode TIG arc plasma

    Kazufumi Nomura, Kentarou Shirai, Takashi Kishi, Yoshinori Hirata

    Welding International Vol. 29 No. 7 p. 493-501 2015/07/03 Research paper (scientific journal)

    Publisher: Taylor and Francis Ltd.
  61. アーク現象の解明が溶接を革新する

    田中学, 平田好則, 茂田正哉, 野村和史, 荻野陽輔

    Welding Technology Vol. 63 No. 7 p. 42-47 2015/07/01

    Publisher:
  62. Temperature measurement of asymmetrical pulsed TIG arc plasma by multidirectional monochromatic imaging method

    K. Nomura, T. Kishi, K. Shirai, Y. Hirata, K. Kataoka

    Welding in the World Vol. 59 No. 2 p. 283-293 2015/02/01 Research paper (scientific journal)

  63. 高速度カメラによるアーク溶接プロセスの観察とシミュレーション

    Y. Hirata, M. Tanaka, M. Masaya, K. Nomura, Y. Ogino

    Journal of The Japan Welding Society Vol. 84 No. 1 p. 19-24 2015/01/01 Research paper (scientific journal)

    Publisher: Japan Welding Society
  64. Numerical analysis of arc plasma behaviour in groove welding with 3D TIG arc model

    Yosuke Ogino, Kazufumi Nomura, Yoshinori Hirata

    Welding International Vol. 27 No. 11 p. 867-873 2013/11/01 Research paper (scientific journal)

  65. Report : The 1st young researcher group seminar and visitation in 2013

    NOMURA Kazufumi

    QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 82 No. 6 p. 484-487 2013/09/05

    Publisher: JAPAN WELDING SOCIETY
  66. 3D temperature measurement of tandem TIG arc plasma

    K. Nomura, T. Kishi, K. Shirai, Y. Hirata

    Welding in the World Vol. 57 No. 5 p. 649-656 2013/09/01 Research paper (scientific journal)

  67. Study on temperature measurement of two-electrode TIG arc plasma

    K. Nomura, K. Shirai, T. Kishi, Y. Hirata

    Quarterly Journal of the Japan Welding Society Vol. 31 No. 2 p. 133-140 2013/06/01 Research paper (scientific journal)

  68. Numerical analysis of arc plasma to weld pool formation by a tandem TIG arc

    Y. Ogino, J. Kawata, Y. Hirata, K. Nomura

    Welding in the World Vol. 57 No. 3 p. 411-423 2013/01/01 Research paper (scientific journal)

    Publisher: SPRINGER HEIDELBERG
  69. Three Dimensional Temperature Measurement of the Gas Tungsten Arc Plasma

    T. Konishi, Y. Hirata, K. Nomura, K. Shirai

    Welding GuideBook 7 Vol. 0 No. 0 p. III-27-III-32 2012/12/01

  70. Development of the Predictable Model for Incomplete Fusions in GMA Welding

    K. Nomura, Y. Yoshioka, T. Hirano and Y. Hirata

    Welding GuideBook 7 Vol. 0 No. 0 p. III-209-III-214 2012/12/01

  71. Numerical Analysis of Welding Arc Plasma by Three Dimensional Arc Model

    Y. Ogino, Y. Hirata, K. Nomura

    Welding GuideBook 7 Vol. 0 No. 88 p. III-143-III-148 2012/12/01 Research paper (scientific journal)

  72. 総説・シミュレーション技術 熱源モデル

    K. Nomura

    Welding GuideBook 7 Vol. 0 No. 0 p. I-55-I-62 2012/12/01

    Publisher:
  73. Shape control of TIG arc plasma by cusp-type magnetic field with permanent magnet

    Kazufumi Nomura, Yousuke Ogino, Yoshinori Hirata

    Welding International Vol. 26 No. 10 p. 759-764 2012/10/01 Research paper (scientific journal)

    Publisher: 0
  74. Heat input and pressure distribution of TIG arc on groove surface

    Y. Ogino, Y. Hirata, K. Nomura

    Welding in the World Vol. 55 p. 107-113 2011/11/12 Research paper (scientific journal)

    Publisher: Springer Verlag
  75. Three dimensional temperature measurement of the gas tungsten arc plasma

    Konishi Takaya, Hirata Yoshinori, Nomura Kazufumi, Shirai Kentaro

    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society Vol. 29 No. 4 p. 274-279 2011/11/01 Research paper (scientific journal)

  76. Control of Welding Arc Plasma by using Magnets

    Y. Hirata, K. Nomura, Y. Ogino

    Journal of Plasma and Fusion Research Vol. 87 No. 8 p. 535-538 2011/10/01

  77. Numerical analysis of the heat source characteristics of a two-electrode TIG arc

    Y. Ogino, Y. Hirata, K. Nomura

    Journal of Physics D: Applied Physics Vol. 44 2011/05/01 Research paper (scientific journal)

  78. Magnetic Control of TIG Arc Plasma by Permanent Magnets

    K. Nomura, Y. Ogino, T. Haga, Y. Hirata

    Journal of the Japan Welding Society Vol. 80 No. 3 p. 8-11 2011/04/01

    Publisher: JAPAN WELDING SOCIETY
  79. Features of Magnetic Controlled TIG Arc Plasma - Modeling and Experiment

    K. Nomura, Y. Ogino, K. Murakami, Y. Hirata

    Mathematical Modelling of Weld Phenomena Vol. 9 p. 83-91 2011/01/01 Research paper (scientific journal)

  80. Numerical Analysis of Arc Plasma Behavior in Groove Welding with 3D TIG Arc Model

    Y. OGINO, K. NOMURA, Y. HIRATA

    Quarterly J. Japan Welding Soc. Vol. 28 No. 1 p. 10-15 2010/01/01 Research paper (scientific journal)

  81. Magnetic control of arc plasma and its modelling

    Kazufumi Nomura, Kazuyuki Morisaki, Yoshinori Hirata

    Welding in the World Vol. 53 p. R181-R187 2009/07/08 Research paper (scientific journal)

    Publisher: Institut International de la Soudure
  82. Shape control of TIG arc plasma by cusp type magnetic field with permanent magnets

    Kazufumi Nomura, Yousuke Ogino, Yoshinori Hirata

    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society Vol. 27 No. 3 p. 170-175 2009/07/01 Research paper (scientific journal)

  83. Magnetic control of TIG arc plasma

    Yoshinori Hirata, Kazufumi Nomura, Kazuyuki Morisaki

    ASM Proceedings of the International Conference: Trends in Welding Research p. 721-725 2009/01/01 Research paper (international conference proceedings)

  84. Temperature Distribution Analysis of Second Harmonic Generation with Repetitive Irradiation of a Focused Beamand Examination of Improvement of Higher Conversion Efficiency

    Kazufumi Nomura, Etsuji Ohmura, Yoshinori Hirata

    Jouranal of Japan Laser Processing Society Vol. 14 No. 1 p. 27-32 2007/01/01 Research paper (scientific journal)

    Publisher:
  85. Theoretical Analysis of second harmonic generation considering laser absorption with repetitive irradiation of focused beam

    K. Nomura, E. Ohmura, Y. Hirata

    Journal of Laser Micro/Nanoengineering Vol. 1 No. 3 p. 247-252 2006/12/01 Research paper (scientific journal)

  86. Analysis of Second Harmonic Pulse Distortion Induced by Repetitive Irradiation

    Kazufumi Nomura, Etsuji Ohmura, Isamu Miyamoto

    Materials Science Forum Vol. 512 No. 0 p. 343-348 2006/09/01 Research paper (international conference proceedings)

  87. Analysis of second harmonic generation with repetitive irradiation of focused beam

    Kazufumi Nomura, Etsuji Ohmura, Yoshinori Hirata

    Proceedings of 2006 International Symposium on Flexible Automation Vol. 0 No. 0 p. 288-294 2006/07/01 Research paper (international conference proceedings)

    Publisher: 2006 International Symposium on Flexible Automation (ISFA2006)
  88. Analysis of Second Harmonic Generation Considering Laser Absorption with Repetitive Irradiation

    Kazufumi Nomura, Etsuji Ohmura, Yoshinori Hirata

    Proceedings of SPIE Vol. 6259 p. 183-191 2006/05/01 Research paper (international conference proceedings)

    Publisher: SPIE-INT SOC OPTICAL ENGINEERING
  89. Analysis of Second Harmonic Generation and Output Pulse Distortion Considering Laser Absorption with Repetitive rradiation

    Kazufumi Nomura, Etsuji Ohmura, Isamu Miyamoto

    Journal of Japan Laser Processing Society Vol. 11 No. 3 p. 167-174 2005/02/01 Research paper (scientific journal)

  90. Beam Profile Analysis of Second Harmonic Generated by KTiOPO4

    Etsuji Ohmura, Kazufumi Nomura, Isamu Miyamoto

    Transactions of the Japan Society of Mechanical Engineers, Ser. C Vol. 70 No. 697 p. 2744-2752 2004/09/01 Research paper (scientific journal)

  91. Influence of Temporal Pulse Shape on Second Harmonic Generation

    Etsuji Ohmura, Kazufumi Nomura, Isamu Miyamoto

    Transactions of the Japan Society of Mechanical Engineers, Ser. C Vol. 70 No. 697 p. 2753-2759 2004/09/01 Research paper (scientific journal)

  92. Beam Profile Analysis of Second Harmonic Generated by KH2PO4

    Etsuji Ohmura, Kazuhumi Nomura, Isamu Miyamoto

    Transactions of the Japan Society of Mechanical Engineers, Ser. C Vol. 70 No. 697 p. 2737-2743 2004/09/01 Research paper (scientific journal)

  93. Distortion analysis of beam profile and pulse shape of second harmonic due to repetitive irradiation of picosecond pulses

    Etsuji Ohmura, Kazufumi Nomura, Isamu Miyamoto

    Proceedings of SPIE - The International Society for Optical Engineering Vol. 5456 p. 19-27 2004/04/01 Research paper (international conference proceedings)

    Publisher: SPIE
  94. Analysis of Temporal and Spatial Distortion of Second Harmonic Pulse

    Kazufumi Nomura, Etsuji Ohmura, Isamu Miyamoto

    Proceedings of the 10th Symposium on "Microjoining and Assembly Technology in Electronics" Vol. 0 No. 0 p. 387-392 2004/02/01 Research paper (other academic)

    Publisher: Microjoining and Assembly Technology in Electronics (Mate2004)
  95. Theoretical Analysis of Beam Profile of Second Harmonic Generated by KTiOPO4 Crystal

    Etsuji Ohmura, Kazufumi Nomura, Alexander Horn, Isamu Miyamoto

    Proceedings of the International Conference on Leading Edge Manufacturing in 21st Century Vol. 0 No. 0 p. 879-894 2003/11/01 Research paper (international conference proceedings)

    Publisher: International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
  96. Theoretical Analysis on Temperature Dependence of SHG by Nonlinear Optical Crystal

    E. Ohmura, K. Nomura, I. Miyamoto

    Quarterly J. Japan Welding Soc. Vol. 21 No. 3 p. 344-349 2003/08/01 Research paper (scientific journal)

  97. Influence of Temporal Pulse Shape on Second Harmonic Generation

    Etsuji Ohmura, Kazufumi Nomura, Isamu Miyamoto

    Proceedings of SPIE - The International Society for Optical Engineering Vol. 5063 p. 520-525 2003/06/01 Research paper (international conference proceedings)

    Publisher: SPIE
  98. Theoretical Analysis of Second Harmonic Characteristics Generated by KTiOPO4 Crystal

    Kazufumi Nomura, Etsuji Ohmura, Alexander Horn, Isamu Miyamoto

    Proceedings of SPIE - The International Society for Optical Engineering Vol. 5063 p. 514-519 2003/06/01 Research paper (international conference proceedings)

    Publisher: SPIE
  99. Theoretical Analysis of SHG Conversion Efficiency Due to Gaussian Beam irradiation

    Kazufumi Nomura, Etsuji Ohmura, Isamu Miyamoto

    Journal of the Japan Society of Precision Engineering Vol. 69 No. 3 p. 390-395 2003/03/01 Research paper (scientific journal)

  100. Coupling Analysis of Second Harmonic Generation and Temperature Variation in Nonlinear Optical Crystal

    Kazufumi Nomura, Daisuke Fujimaki, Etsuji Ohmura, Isamu Miyamoto

    Proceedings of the 9th Symposium on "Microjoining and Assembly Technology in Electronics" Vol. 0 No. 0 p. 531-536 2003/02/01 Research paper (other academic)

    Publisher: Microjoining and Assembly Technology in Electronics (Mate2003)
  101. Influence of Laser Absorption by Nonlinear Optical Crystal on SHG Efficiency

    Etsuji Ohmura, Kazufumi Nomura, Isamu Miyamoto

    Journal of the Japan Society of Precision Engineering Vol. 69 No. 2 p. 252-257 2003/02/01 Research paper (scientific journal)

  102. Theoretical Analysis of SHG Conversion Efficiency of Nonlinear Optical Crystal with Gaussian Beam Irradiation

    Kazufumi Nomura, Etsuji Ohmura, Isamu Miyamoto

    Proceedings of SPIE Vol. 4830 p. 330-335 2003/01/01 Research paper (international conference proceedings)

    Publisher: SPIE
  103. Influence of laser absorption by nonlinear optical crystal on SHG efficiency

    Etsuji Ohmura, Kazufumi Nomura, Isamu Miyamoto

    Proceedings of SPIE - The International Society for Optical Engineering Vol. 4830 p. 307-312 2003/01/01 Research paper (international conference proceedings)

    Publisher: SPIE
  104. Temperature Dependence of SHG by Nonlinear Opti-cal

    Etsuji Ohmura, Kazufumi Nomura, Isamu Miyamoto

    Proceedings of 2002 Japan-USA Symposium on Flexible Automation (2002 JUSFA) Vol. 0 No. 0 p. 781-786 2002/07/01 Research paper (international conference proceedings)

    Publisher: 2002 Japan-USA Symposium on Flexible Automation (2002 JUSFA)

Misc. 107

  1. Study on the In-process Measurement of the Weld Quality Using Laser Ultrasonic

    Kazufumi NOMURA, Satoru ASAI

    Proceedings of the 95th Laser Materials Processing Conference p. 81-85 2021/08 Research paper, summary (national, other academic conference)

  2. Fundamental plasma diagnostic study for guiding TIG arc phenomenon by laser irradiation

    Hiroyuki OKUDA, Kazufumi NOMURA, Satoru ASAI, Shohei IWATA, Yasushi KITANI, Kenji OI

    Vol. 1 p. 235-236 2019/11

  3. In-situ monitoring technique of the welding defects during GMA welding by using laser ultrasonic

    Satoshi OTAKI, Taketo MATSUIDA, Kazufumi NOMURA, Satoru ASAI

    Vol. 1 p. 301-302 2019/11

  4. Development of in-situ measurement system for welding robot by laser ultrasonic with microchip laser

    Kazufumi NOMURA, Taketo MATSUIDA, Satoshi OTAKI, Ryosuke KITA, Satoru ASAI

    Vol. 1 p. 143-144 2019/11

  5. Study of burn-through prediction in MAG arc welding using molten pool monitoring technique

    Takumi MATSUMURA, Kazufumi NOMURA, Satoru ASAI

    Vol. 1 p. 303-304 2019/11

  6. Fundamental study for in-situ quality measurement of WAAM process by laser ultrasonic technique

    Taketo MATSUIDA, Ryosuke KITA, Satoshi OTAKI, Kazufumi NOMURA, Satoru ASAI

    Vol. 1 p. 317-318 2019/11

  7. Burn-through Prediction Using Deep Learning Model in Single Bevel Groove Welding

    Koki FUKUSHIMA, Takumi MATSUMURA, Kazufumi NOMURA, Satoru ASAI

    Vol. 1 p. 305-306 2019/11

  8. Three-dimensional visualization of welding arc plasma by multi-colored and multi-directional spectroscopic measurement

    K. Nomura, S. Asai

    2019/11

  9. TIGアーク溶接中の表面計測を用いた溶込み深さの推定

    野村和史, 山下隼, 井村文哉, 浅井知

    溶接法研究委員会資料 2019/11

  10. レーザによるTIGアーク誘導現象のプラズマ診断による基礎検討

    奥田 博之, 野村 和史, 浅井 知, 岩田 匠平, 木谷 靖, 大井 健次

    溶接学会全国大会講演概要 Vol. 105 p. 146-147 2019/09

  11. 溶融池モニタリング技術を用いたマグ溶接における溶落ち発生の予測に関する研究

    松村 匠, 野村 和史, 浅井 知

    溶接学会全国大会講演概要 Vol. 105 p. 360-361 2019/09

  12. レーザ超音波法を用いたWAAM品質のその場計測に向けた基礎検討

    松井田 丈斗, 喜多 亮右, 大滝 悟嗣, 野村 和史, 浅井 知

    溶接学会全国大会講演概要 Vol. 105 p. 124-125 2019/09

  13. レーザ超音波による溶接品質その場計測に関する研究(第3報)

    大滝 悟嗣, 松井田 丈斗, 野村 和史, 浅井 知

    溶接学会全国大会講演概要 Vol. 105 p. 38-39 2019/09

  14. Monitoring technique of weld quality using laser ultrasonic IV: Development of robotic measurement system with microchip laser

    2019/09

  15. Monitoring technique of weld quality using laser ultrasonic II: In-situ detection of weld defect during the welding process

    2019/09

  16. Monitoring technique of weld quality using laser ultrasonic I: In-situ measurement of weld penetration depth during the welding process

    2019/09

  17. 溶接プロセスの計測・モニタリングにおけるスペクトル情報の活用

    野村 和史

    溶接学会全国大会講演概要 Vol. 104 p. F27-F31 2019/04

  18. マイクロチップレーザを用いたレーザ超音波その場計測システムの開発

    松井田 丈斗, 喜多 亮右, 大滝 悟嗣, 野村 和史, 浅井 知

    溶接学会全国大会講演概要 Vol. 104 p. 106-107 2019/04

  19. マグ溶接アークプラズマの温度計測における連続光の影響評価

    野村 和史, 高見 康平, 奥田 博之, 浅井 知

    溶接学会全国大会講演概要 Vol. 104 p. 96-97 2019/04

  20. 溶接熱源のモデル化とそれによる溶融池形成予測技術の開発

    浅井知, 荻野陽輔, 野村和史, 田中学, 茂田正哉, 松田朋己, 廣瀬明夫

    溶接学会全国大会概要第104集 2019/04

  21. Influence of continuous radiation on the temperature measurement of MAG arc plasma

    K. Nomura, K. Takami, H. Okuda, S. Asai

    2019/03

  22. レーザ超音波による溶接欠陥のその場計測に関する研究

    大滝 悟嗣, 喜多 亮右, 野村 和史, 浅井 知

    第26回超音波による非破壊評価シンポジウム講演論文集 p. 79-80 2019/01

  23. レ型開先継手に対するレーザ超音波を用いた溶接欠陥のその場検出

    野村 和史, 大滝 悟嗣, 喜多 亮右, 井村 文哉, 浅井 知

    溶接法研究委員会資料 2019/01

  24. 回転式水冷分割銅板を用いた傾斜TIGアークプラズマに対する電流・入熱密度分布のトモグラフィ計測

    相部 篤志, 野村 和史, 浅井 知

    プラズマ・核融合学会 九州・沖縄・山口支部 第22回支部大会研究発表 論文集 p. 126-127 2018/12

  25. Ar-CO2混合ガス溶接プラズマの温度計測における連続光の影響評価

    奥田 博之, 高見 康平, 野村 和史, 浅井 知

    プラズマ・核融合学会 九州・沖縄・山口支部 第22回支部大会研究発表 論文集 p. 91-92 2018/12

  26. Visualization of the weld pool shape by laser ultrasonic technique in arc welding

    Vol. 103 p. 144-146 2018/09

  27. Tomographic measurement of tilting TIG arc using rotational split water-cooled copper anode

    Vol. 103 p. 354-355 2018/09

  28. Study on the in-situ measurement of the molten pool shape using a laser ultrasonic (4th report) -Weld pool depth monitoring of GMA welding-

    Vol. 103 p. 350-351 2018/09

  29. Tomographic measurement of the current and heat input densities for the axially asymmetric TIG arc plasma

    K. Nomura, A. Aibe, S. Asai

    Proceeding of SG212 2018/07

  30. In-situ measurement of weld pool depth during TIG welding using laser ultrasonic

    S. Asai, K. Nomura, F. Imura, R. Kita, S.Otaki

    2018/07

  31. In-situ Detection of Weld Defect Using Laser Ultrasonic

    ASAI Satoru, NOMURA Kazufumi, OTAKI Satoshi, IMURA Fumiya, KITA Ryosuke

    Proceeding of C-XII 2018/07

  32. 非軸対称ティグアークの電流・入熱密度分布のトモグラフィ計測

    野村 和史, 相部 篤志, 浅井 知

    溶接法研究委員会資料 2018/05

  33. Estimation of the weld penetration by surface temperatures measurement in arc welding

    Vol. 102 p. 188-189 2018/04

  34. 三次元発光分光法による非軸対称溶接アークの可視化

    野村 和史

    2018/01

  35. レーザ超音波による溶接中の溶融池計測に関する研究

    喜多亮右, 井村文哉, 大滝悟嗣, 野村和史, 浅井知

    超音波による非破壊評価シンポジウム講演論文集(CD-ROM) Vol. 25th p. 43-44 2018/01

  36. 炭酸ガスアーク溶接における非軸対称プラズマ挙動の発光分光計測

    高見 康平, 三村 晃平, 戸田 要, 野村 和史, 浅井 知, 上月渉平, 早川直哉, 池田倫正

    プラズマ・核融合学会 九州・沖縄・山口支部 第21回支部大会研究発表 論文集 p. 75-76 2017/12

  37. 混合ガスを用いた溶接アークプラズマの分光計測に関する研究

    戸田 要, 野村 和史, 浅井 知

    プラズマ・核融合学会 九州・沖縄・山口支部 第21回支部大会研究発表 論文集 p. 79-80 2017/12

  38. Study on the in-situ measurement of the weld quality using laser ultrasonic

    umiya IMURA, Ryosuke KITA, Kazufumi NOMURA, Satoru ASAI

    溶接構造シンポジウム講演論文集 Vol. 2017 p. 181-184 2017/12

  39. Ultrasonic imaging of molten pool configuration using sound velocity compensation

    SUGAWARA Azusa, HOSHI Takeshi, YAMAMOTO Setsu, SEMBOSHI Jun, OCHIAI Makoto, NOMURA Kazufumi, ASAI Satoru

    超音波エレクトロニクスの基礎と応用に関するシンポジウム(CD-ROM) Vol. 38th 2017/10/25

  40. A Study on Digitization of Welder's Skill (1st Report) -Welder's Motion Analysis Using Sensing Device-

    K. Nagaiwa, K. Hattori, R. Nakashima, S. Asai, K. Nomura

    Vol. 101 p. 382-383 2017/09

  41. Study of 3D temperature measurement of arc plasma in MAG welding

    Vol. 101 p. 368-369 2017/09

  42. Study on the in-situ measurement of the molten pool shape using a laser ultrasonic (3rd report)

    Vol. 101 p. 8-9 2017/09

  43. 炭酸ガスアーク溶接における反発移行アーク挙動の三次元発光分光計測

    野村 和史, 高見 康平, 三村 晃平, 戸田 要, 浅井 知, 上月渉平, 早川直哉, 池田倫正

    溶接法委員会資料 2017/08

  44. Technical Commission on Welding Processes

    Vol. 86 No. 5 p. 347-356 2017/07

    Publisher: 溶接学会
  45. Study on the in-situ measurement of the molten pool shape using a laser ultrasonic (2nd report)

    Vol. 100 p. 80-81 2017/04

  46. Three dimensional spectroscopy of welding arc plasma by multidirectional simultaneous method (3rd report) -Influence of tomographic methods on the reconstructed distribution-

    野村和史, 三村晃平, 戸田要, 浅井知

    溶接学会全国大会講演概要(Web) Vol. 100 No. 100 p. 82-83 2017/04

  47. レーザ超音波を用いた溶融池形状その場計測の基礎的検討

    井村文哉, 峰憂, 喜多亮右, 野村和史, 浅井知, 星岳志

    超音波による非破壊評価シンポジウム講演論文集(CD-ROM) Vol. 24th p. 35-36 2017/01

  48. 溶接アークプラズマのトモグラフィ計測手法に関する研究

    三村 晃平, 戸田 要, 野村 和史, 浅井 知

    プラズマ・核融合学会 九州・沖縄・山口支部 第20回支部大会研究発表 論文集 p. 125-126 2016/12

  49. 溶接アークプラズマの三次元温度・金属蒸気濃度分布計測

    戸田 要, 吉井 嘉一郎, 野村 和史, 三村 晃平, 平田 好則, 浅井 知

    プラズマ・核融合学会 九州・沖縄・山口支部 第20回支部大会研究発表 論文集 p. 99-100 2016/12

  50. レーザ超音波法を用いたインプロセスモニタリングシステムの開発

    浅井 知, 野村 和史, 峰 優, 小川 剛史, 星 岳志, 菅原 あずさ

    溶接法委員会資料 2016/11

  51. 3D Spectroscopic Measurement of Temperature Distribution in MIG Welding

    K. Toda, K. Yoshii, K. Nomura, K. Mimura, Y. Hirata, S. Asai

    Visual-JW2016 Vol. 1 p. 51-52 2016/10

  52. Study on the in-situ measurement of the molten pool shape using a laser ultrasonic

    F. Imura, Y, mine, K. Nomura, S. Asai, T. Hoshi, A. Sugawara

    Visual-JW 2016 Vol. 1 p. 101-102 2016/10

  53. 3D temperature measurement of MIG arc plasma by multidirectional spectroscopic method

    K. Nomura, K. Yoshii, K. Toda, K. Mimura, Y. Hirata, S. Asai

    Proceedings, 10th International Conference on Trends in Welding Research & 9th International Welding Symposium of Japan Welding Society (9WS) p. 397-397 2016/10

  54. レ型開先内における埋もれアーク溶接に関する研究

    井上 洋輝, 野村 和史, 浅井 知

    溶接学会全国大会講演概要 Vol. 99 p. 11-11 2016/09

  55. Study on the in-situ measurement of the molten pool shape using a laser ultrasonic

    Y. Mine, K. Nomura, T. Matsuda, S. Asai, T. Hoshi, A. Sugawara

    溶接学会全国大会講演概要(Web) Vol. 99 No. 99 p. 262-263 2016/09

    Publisher: JAPAN WELDING SOCIETY
  56. 多方向発光分光法によるミグ溶接の三次元温度・金属蒸気濃度計測

    野村和史, 戸田要, 吉井嘉一郎, 三村晃平, 平田好則, 浅井知

    溶接法委員会資料 2016/08

  57. In-Process Imaging of Molten Pool Configuration

    Takeshi Hoshi, Azusa Sugawara, Setsu Yamamoto, Makoto Ochiai, Tsuyoshi Ogawa, Kazufumi Nomura, Satoru Asai

    2016/07

  58. Application of laser ultrasonic technique to in-situ monitoring system of weld quality

    S. Asai, K. Nomura, T. Ogawa, T. Hoshi, A. Sugawara, M. Ochiai

    Proceedings of C-XII 2016/07

  59. アーク放電により形成された金属液滴の表面張力の測定

    飯田将裕, 平田好則, 野村和史, 荻野陽輔, 浅井知, 泉谷瞬, 細井宏一

    溶接学会全国大会講演概要(Web) Vol. 98 No. 98 p. 192-193 2016/04

    Publisher: JAPAN WELDING SOCIETY
  60. 3D spectroscopic measurement of temperature distribution in MIG welding

    K. Toda, K. Yoshii, K. Nomura, K. Mimura, Y. Hirata, S. Asai

    溶接学会全国大会講演概要(Web) Vol. 98 No. 98 p. 188-189 2016/04

    Publisher: JAPAN WELDING SOCIETY
  61. 3D spectroscopy measurement of argon and metal vapor in MIG welding (2nd Report)

    K. Yoshii, K. Nomura, K. Mimura, Y. Hirata

    溶接学会全国大会講演概要 Vol. 96 No. 97 p. 394-395 2015/09

  62. Influence of the interference filter characteristics on the temperature measurement of welding arc by spectroscopic method

    K. Nomura, J. Nagata, Y. Hirata, S. Asai

    溶接学会全国大会講演概要 Vol. 96 No. 97 p. 44-45 2015/09

  63. アーク溶接プロセス―発光分光法による熱源特性の可視化―

    野村和史, 平田好則

    溶接学会全国大会講演概要 Vol. 96 No. 96 p. F-3-F-8 2015/04

  64. 三次元発光分光法を用いたミグ溶接におけるアルゴン・金属蒸気の挙動観察

    片岡耕太朗, 野村和史, 平田好則, 貴志崇

    溶接学会全国大会講演概要 Vol. 2014 No. 95 p. 190-191 2014/09

    Publisher: JAPAN WELDING SOCIETY
  65. Three Dimensional Spectroscopy of Welding Arc Plasma by Multidirectional Simultaneous Method

    K. Nomura, T. Kishi, Y. Hirata, K. Yoshii

    Preprints of the National Meeting of JWS No. 96 p. 138-139 2014/04

  66. 溶接アークの多方向同時三次元分光計測

    貴志崇, 野村和史, 平田好則, 吉井嘉一郎

    溶接学会全国大会講演概要 No. 94 p. 52-53 2014/03/20

  67. Numelical analysis of TIG arc welding with filler wire feeding by simple model

    K. Kotaro, K. Nomura, Y. Ogino, Y. Hirata

    Preprints of the National Meeting of JWS Vol. 93 No. 93 p. 58-59 2013/09

    Publisher: JAPAN WELDING SOCIETY
  68. Study of droplet transfer effects in simple model of GMA welding

    K. Nomura, Y. Hirata

    Preprints of the National Meeting of JWS Vol. 92 p. 116-117 2013/04

  69. GMAW簡易モデルにおける溶滴移行効果に関する研究

    野村和史, 平田好則

    溶接学会全国大会講演概要 No. 92 p. 116-117 2013/03/21

  70. Research on weld pool formation by two-electrode TIG arc 2nd report

    Y. Ogino, J. Kawata, K. Nomura, Y. Hirata

    Preprints of the National Meeting of JWS Vol. 91 No. 91 p. 336-337 2012/09

    Publisher: JAPAN WELDING SOCIETY
  71. Study on generation mechanism of weld imperfection in GMA welding

    T. Haga, K. Nomura, Y. Hirata

    Preprints of the National Meeting of JWS Vol. 91 No. 91 p. 398-399 2012/09

    Publisher: JAPAN WELDING SOCIETY
  72. Temperature measurement of twin electrode TIG arc

    K. Shirai, T. Kishi, K. Nomura, Y. Hirata

    Preprints of the National Meeting of JWS Vol. 91 No. 91 p. 242-243 2012/09

    Publisher: JAPAN WELDING SOCIETY
  73. 2電極ティグ溶接におけるアークプラズマ-溶融池の数値解析

    荻野陽輔, 河田純一, 平田好則, 野村和史

    溶接法委員会資料 2012/08

  74. 2電極ティグアークの溶込み形成現象に関する研究

    荻野陽輔, 河田純一, 野村和史, 平田好則

    溶接学会全国大会講演概要 Vol. 90 No. 90 p. 4-5 2012/03/15

    Publisher: JAPAN WELDING SOCIETY
  75. Research on weld pool formation by magnetic controlled arc

    Y. Ogino, J. Kawata, K. Nomura, Y. Hirata

    Preprints of the National Meeting of JWS No. 89 p. 332-333 2011/09

  76. Development on Magnetic Control of Arc Plasma in Gas Shielded Arc Welding, 5th report

    M. Park, K. Nomura, Y. Hirata

    Preprints of the National Meeting of JWS No. 88 p. 82-83 2011/04

  77. Development on Magnetic Control of Arc Plasma in Gas Shielded Arc Welding, 5th report

    Y. Ogino, T. Haga, K. Nomura, Y. Hirata

    Preprints of the National Meeting of JWS Vol. 2011 No. 88 p. 76-77 2011/04

    Publisher: JAPAN WELDING SOCIETY
  78. 3次元アークモデルによる溶接アーク現象解析

    野村 和史, 荻野 陽輔, 小西 貴也, 平田 好則

    溶接学会全国大会講演概要 Vol. 88 p. F17-F22 2011/03/28

  79. Fundamental Research on Micro Discharge Process -Research on Discharge of Sub-millimeter size Process-

    M. Park, Y. Hirata, K. Nomura

    Visual-JW2010 Vol. 39 No. 2 p. 207-208 2010/11

  80. 3-D Measurement of Gas Tungsten Arc Plasma

    T. Konishi, K. Nomura, Y. Hirata

    Preprints of the National Meeting of JWS No. 87 p. 388-389 2010/09

  81. 3D Numerical Model of Molten Metal Flow in Weld Pool

    Y. Ogino, K. Nomura, T, Hirano, Y. Hirata

    Preprints of the National Meeting of JWS No. 87 p. 404-405 2010/09

  82. Cathode Phenomena of Gas ShieldedArc

    N. Furukawa, A. Sato, T. Higuchi, K. Nomura, Y. Hirata

    Preprints of the National Meeting of JWS No. 87 p. 390-391 2010/09

  83. マイクロアークプロセスに関する研究

    PARK Mingon, 平田好則, 野村和史

    溶接学会全国大会講演概要 No. 87 p. 396-397 2010/08/18

  84. Influence of Magnet Configurations on Magnetic Controlled TIG Arc Welding

    K. Nomura, Y. Ogino, T. Haga, K. Murakami, T. Hirano, Y. Hirata

    IIW Doc. Vol. 39 No. 2 p. 209-210 2010/07

  85. Numerical Analysis on the Heat Source Characteristics of the Two-Electrodes TIG Arc

    Y. Ogino, Y. Hirata, K. Nomura

    IIW Doc. Vol. 39 No. 2 p. 204-206 2010/07

  86. Development on Magnetic Control of Arc Plasma in Gas Shielded Arc Welding, 4th report

    K. Nomura, K. Murakami, Y. Ogino, T. Hirano, Y. Hirata

    Preprints of the National Meeting of JWS No. 86 p. 118-119 2010/04

  87. https://www.jstage.jst.go.jp/article/jwstaikai/2010s/0/2010s_0_55/_pdf

    Y. Ogino, K. Nomura, Y. Hirata

    Preprints of the National Meeting of JWS No. 86 p. 124-125 2010/04

  88. Numerical Analysis of Arc Plasma Behavior in Multi-electrodes Welding with 3D TIG Arc Model

    OGINO Yosuke, NOMURA Kazufumi, HIRATA Yoshinori

    Vol. 86 p. 124-125 2010/03/29

  89. 3次元アークモデルの開先部への適用

    荻野陽輔, 野村和史, 平田好則

    溶接学会全国大会講演概要 Vol. 84 No. 84 p. 112-113 2009/04

  90. Development on Magnetic Control of Arc Plasma in Gas Shielded Arc Welding, 3rd report

    K. Nomura, K. Morisaki, Y. Ogino, Y. Hirata

    Preprints of the National Meeting of JWS No. 83 p. 348-349 2008/09

  91. 3D Analysis on Magnetic Controlled Arc Plasma in Gas Shielded Arc Welding

    2008/05

  92. Development on Magnetic Control of Arc Plasma in Gas Shielded Arc Welding, 2nd report

    K. Nomura, K. Morisaki, Y. Hirata

    Preprints of the National Meeting of JWS Vol. 2008 No. 82 p. 216-217 2008/04

    Publisher: JAPAN WELDING SOCIETY
  93. 溶接アークの磁気的制御に関する研究

    野村和史, 森崎和之, 平田好則

    溶接学会全国大会講演概要 No. 81 p. 294-295 2007/09/01

    Publisher: Japan Welding Society
  94. ウォークオフを考慮した高調波発生の非定常解析

    宮田貴史, 野村和史, 大村悦二, 平田好則

    応用物理学関係連合講演会講演予稿集 Vol. 53rd No. 3 2006/03/22

  95. 集光ビームの繰り返し照射下におけるレーザ吸収を考慮した波長変換に関する理論解析

    野村和史, 宮田貴史, 大村悦二, 平田好則

    応用物理学関係連合講演会講演予稿集 Vol. 53rd No. 3 2006/03/22

  96. レーザ吸収により生じる非線形光学結晶内の温度分布に関する理論解析

    野村和史, 大村悦二, 平田好則

    応用物理学会学術講演会講演予稿集 Vol. 66th No. 3 2005/09/07

  97. 高強度パルスレーザのレーザ吸収を考慮した第二高調波発生に関する理論解析

    野村和史, 大村悦二, 平田好則

    応用物理学会学術講演会講演予稿集 Vol. 65th No. 3 2004/09/01

  98. Analysis on Conversion Efficiency and Beam Profile of Second Harmonic Generated by KTP

    Etsuji Ohmura, Kazufumi Nomura, Isamu Miyamoto

    ICALEO2003 Congress Proceedings (CD-ROM) Vol. P520 p. 1-10 2003/10

    Publisher: Laser Institute of America
  99. 第二高調波発生に及ぼす入射偏光波の回転角度の影響

    大村悦二, 野村和史, 宮本勇

    精密工学会大会学術講演会講演論文集 Vol. 2003 2003/09/10

  100. 第二高調波発生におけるパルス波形とビームプロファイルの歪み解析

    野村和史, 大村悦二, 宮本勇

    精密工学会大会学術講演会講演論文集 Vol. 2003 2003/09/10

  101. Influence of Pulse Shape on Second Harmonic Generation Accompanying Laser Absorption

    大村悦二, 野村和史, 宮本勇

    日本機械学会年次大会講演論文集 Vol. 2003 No. Vol.4 p. 307-308 2003/08/05

  102. Influence of Pulse Shape on Second Harmonic Generation Accompanying Laser Absorption

    OHMURA Etsuji, NOMURA Kazufumi, MIYAMOTO Isamu

    The proceedings of the JSME annual meeting Vol. 2003 No. 0 p. 307-308 2003

    Publisher: The Japan Society of Mechanical Engineers
  103. Theoretical Analysis on SHG Conversion Efficiency during Gaussian Beam Irradiation and Temperature Control.

    野村和史, 大村悦二, 宮本勇

    日本機械学会生産加工・工作機械部門講演会講演論文集 Vol. 4th p. 223-224 2002/11/19

  104. Theoretical Study on SHG Conversion Efficiency for Gaussian Beam and Control of Its Decline

    Kazufumi Nomura, Etsuji Ohmura, Isamu Miyamoto

    ICALEO2002 Congress Proceedings Vol. 94 p. 903-912 2002/10

    Publisher: Laser Institute of America
  105. Laser-Absorption Dependence of SHG Conversion Efficiency by Nonlinear Optical Crystal

    Etsuji Ohmura, Kazufumi Nomura, Isamu Miyamoto

    ICALEO2002 Congress Proceedings Vol. 94 p. 1631-1640 2002/10

    Publisher: Laser Institute of America
  106. ガウシャンビーム照射による第二高調波発生効率の解析

    大村悦二, 野村和史, 宮本勇

    精密工学会大会学術講演会講演論文集 Vol. 2002 2002/09/10

  107. 非線形光学結晶におけるレーザ光吸収の第2高調波発生に及ぼす影響

    野村 和史, 木村 悦二, 宮本 勇

    精密工学会大会学術講演会講演論文集 Vol. 2002 No. 1 p. 405-405 2002/03/01

Publications 1

  1. 新溶接アーク現象

    溶接学会溶接法研究委員会

    産報出版 2021/06 Scholarly book

    ISBN: 9784883180608

Presentations 219

  1. 積層造形材のその場欠陥検出に向けたレーザ超音波法による非接触計測の基礎研究

    K. Nomura, N. Okuyama, T. Sano, S. Nitta, K. Kadota, T. Era, S. Asai

    第269回溶接法研究委員会 2025/05/14

  2. レーザ超音波法を用いた溶接品質その場計測と金属積層造形プロセスへの応用に向けて

    K. Nomura

    AM部会 2024年度第4回技術委員会 2025/03/21

  3. Study on Quality Estimation of Friction Stir Welded Joints of Cu-Al Dissimilar Materials Using Laser Ultrasonic Method

    S. Ishifuro, K. Nomura, S. Asai, T. Ogura, Y. Morisada, H. Fujii

    32nd Symposium on Ultrasonic Testing 2025/01/22

  4. Study on creation of laser ultrasonic detecting spot using excitation laser

    K. Nomura, N. Okuyama, T. Sano, S. Nitta, K. Kadota, T. Era, S. Asai

    32nd Symposium on Ultrasonic Testing 2025/01/22

  5. 不安定なプラズマプロセスを入力としたAIによる溶接品質推定

    K. Nomura

    DXプラズマプロセス委員会『DXのプラズマ産業への展開 ~事例から学ぶデータサイエンス~』 2024/10/30

  6. 抵抗スポットナゲット径のレーザ超音波法による非接触測定に関する研究

    K. Nomura, S. Mishima, T. Sano

    第146回軽構造接合加工研究委員会 2024/09/11

  7. A study on extraction of molten pool feature using U-net for estimating overlay welding quality

    Naoya IWATA, Kazufumi NOMURA, Takamitsu MARUYAMA, Kazunori HATTORI

    National Meeting of JWS 2024/09/05

  8. Effect of current waveform in MIG arc on weld bead formation in plasma-MIG hybrid welding

    S. Tashiro, K. Ishida, K. Nomura, D. Wu, A. B. Murphy, T. Yuji, M. Tanaka

    iiw2024 Annual Assembly 2024/07/09

  9. Study on Non-Contact Measurement of Nugget Diameter in RSW by Laser Ultrasonic Method

    K. Nomura, S. Mishima, T. Sano

    iiw2024 Annual Assembly 2024/07/10

  10. Weld quality estimation using welding monitoring and CNN in square groove weaving welding

    K. Nomura, R. Ota, M. Mochizuki, F. Imura, M. Amano, H. Mori

    iiw2024 Annual Assembly 2024/07/08

  11. 内部の欠陥・品質をインプロセスで診る技術~モニタリング×AIやレーザ超音波法に関する研究~

    2024/06/05

  12. Microstructures evaluation of steel based on laser ultrasonics technique

    Hongjun Sun, Hiroyuki Takamatsu, Kazufumi Nomura

    20th World Conference on Non-Destructive Testing (20th WCNDT) 2024/05/27

  13. I型開先ウィービング溶接における溶接モニタリングとCNNを用いた溶接品質推定

    K. Nomura, R. Ota, M. Mochizuki, F. Imura, M. Amano, H. Mori

    2024/05/08

  14. Development of Dynamic Laser Ultrasonic System Mounted on Robot Arm Using Microchip Laser

    K. Nomura, N. Okuyama, T. Inoue, T. Sano

    The 10th Tiny Integrated Laser and Laser Ignition Conference 2024 (TILA-LIC2024) 2024/04/26

  15. Study on laser parameter dependence of laser ultrasonic excitation intensity

    K. Nomura, S. Deno, T. Sano

    2024/03/18

  16. 溶融池モニタリング画像とAIを用いた溶込み推定手法に関する研究

    Kazufumi Nomura

    2024/03/11

  17. 薄板ステンレス鋼TIG溶接における高速化と溶接裕度拡大技術の開発

    T. Imai, T. Monodane, K. Nomura

    2024/01/30

  18. Study on laser parameters and excitation intensity characteristics in laser ultrasonic method

    K. Nomura, S. Deno, T. Sano

    31st Symposium on Ultrasonic Testing 2024/01/23

  19. Finite element analysis of defect detectability in scanning measurement of internal defects in thin plate welds by laser ultrasonic method

    N. Okuyama, K. Nomura, T. Sano, K. Kadota, S. Nitta, T. Era, S. Asai

    31st Symposium on Ultrasonic Testing 2024/01/23

  20. Research on non-contact defect detection using laser ultrasonic method for friction stir welded Cu-Al dissimilar material joints

    S. Ishifuro, K. Nomura, T. Sano, S. Asai

    31st Symposium on Ultrasonic Testing 2024/01/23

  21. レーザ超音波による非接触UT法~スポット溶接部のナゲット径計測

    Kazufumi Nomura

    溶接法研究委員会 若手・中堅WG 2023年度 見学会・研究会 2023/12/19

  22. レーザ超音波による非接触UT法を用いた溶接欠陥検出と品質計測

    Kazufumi Nomura

    電気溶接機部会 溶接技術講演会 2023/12/01

  23. 溶接プロセスにおけるAI活用事例と今後の展望

    Kazufumi Nomura

    溶接学会R5年度秋季全国大会 2023/09/14

  24. Study on defect detection in friction stirred joints of Cu-Al dissimilar materials using laser ultrasonics

    Shogo Ishifuro, Kazufumi Nomura, Tomokazu Sano, Satoru Asai

    溶接学会R5年度秋季全国大会 2023/09/14

  25. Weld quality estimation using Convolutional Neural Network in square groove with weaving welding

    Ryota Ota, Kazufumi Nomura, Masahito Mochizuki, Masaharu Amano, Hiroki Mori, Fumiya Imura

    溶接学会R5年度秋季全国大会 2023/09/14

  26. Time-shift Effects of Input Images in Weld Depth Estimation Model using CNN through Molten Pool Monitoring in GMAW

    K. Nomura, W. Tanahara, T. Matsumura, T. Sano

    iiw2023 Annual Assembly 2023/07/17

  27. Development of Laser Ultrasonic Robotic System and Detection Method for Internal Flaw Detection of Sheet Joints

    K. Kadota, S. Nitta, K. Nomura, T. Era, S. Asai

    iiw2023 Annual Assembly 2023/07/17

  28. Time-shift Effects of Input Images in Machine Learning-based Melting Depth Estimation Model and Discussion of Melting Phenomena

    K. Fujiwara, T. Tsuyama, Y. Kotani, K. Nomura, W. Tanahara

    2023/04/25

  29. In-line Detection of Internal Defects in Fillet Welded Sheet of Lap Joint by Laser Ultrasonic and Its Robotic Application Using Microchip Laser

    K. Nomura, T. Matsuida, K. Kadota, S. Nitta, T. Era, S. Asai

    Quantum Beam Application for Sciences and Industries 2023 (Q-BASIS 2023) 2023/04/26

  30. Development of Laser Ultrasonic Robotic System for Internal Flaw Detection of Sheet Joints

    S. Nitta, K. Kadota, K. Nomura, T. Era, S. Asai

    IIW Commission I IV XII Intermediate Meeting 2023/03/27

  31. Development of Laser Ultrasonic Robotic System for Internal Flaw Detection of Sheet Joints

    S. Nitta, K. Kadota, K. Nomura, T. Era, S. Asai

    30th Symposium on Ultrasonic Testing 2023/01/25

  32. Measurement of Resistance Spot Welding Nugget Diameter Measurement of Resistance Spot Welding Nugget Diameter

    S. Mishima, K. Nomura, T. Sano

    30th Symposium on Ultrasonic Testing 2023/01/25

  33. 深層学習を用いた鋼床版Uリブ溶込み深さ推定法の検討

    Y. Kotani, T. Tsuyama, K. Fujiwara, K. Nomura, W. Tanahara

    2023/01/24

  34. In-situ Detection of Weld Quality Using Laser Ultrasonics toward Intelligent Manufacturing

    S. Asai, K. Nomura

    2022 International Conference on Robotic Welding, Intelligence and Automation (RWIA2022) & The 14th Chinese Conference on Robotic Welding (CCRW2020) 2022/12/17

  35. Study on Non-contact In-situ Measurement Method of Weld Joint Quality by Laser Ultrasonic Method

    K. Nomura

    The 24th Annual Academic Exchange Seminar between Shanghai Jiao Tong University and Osaka University --- 2022 Academic Exchange Workshop on Materials Joining --- 2022/11/29

  36. アーク溶接現象の可視化

    K. Nomura

    2022/11/28

  37. In-line Detection of Blowholes in Lap Joint Welding of Galvanized Steel Sheet by Laser Ultrasonic Technique and Its Robotic Application Using Microchip Laser

    K. Nomura, T. Matsuida, K. Kadota, S. Nitta, T. Era, S. Asai

    2022/11/25

  38. レーザ超音波による溶接施工中の欠陥計測に関する研究

    K. Nomura

    2022/11/09

  39. Study on Detecting Method of Internal Defects by Laser Ultrasonics in Lap Joint Welding of Galvanized Steel Sheet and Finite Element Analysis of its Detectability

    N. Okuyama, T. Matsuida, K. Nomura, T. Sano, K. Kadota, S. Nitta, T. Era, S. Asai

    Visual-JW 2022 & DEJI2MA-2 2022/10/26

  40. Study on Non-contact In-situ Measurement Method of Weld Joint Quality by Laser Ultrasonic Method

    K. Nomura, S. Asai

    Visual-JW 2022 & DEJI2MA-2 2022/10/26

  41. Development of Robotic System for Internal Diagnosis of Sheet Joints by Laser Ultrasonic Technique

    S. Nitta, K. Kadota, K. Nomura, T. Era, S. Asai

    2022/09/10

  42. Time-shift Effects of Input Images in Machine Learning-based Melting Depth Estimation Model and Discussion of Melting Phenomena

    W. Tanahara, K. Nomura, T. Matsumura, T. Sano

    2022/09/09

  43. Non-Contact Measurement of Resistance Spot Weld Nugget Diameter Using Laser Ultrasonic Technique

    S. Mishima, K. Nomura, T. Sano

    2022/09/09

  44. Elucidation of arc coupling mechanism in plasma-MIG hybrid welding process through spectroscopic measurement of 3D distributions of plasma temperature and iron vapor concentration

    K. Ishida, S. Tashiro, K. Nomura, D. Wu, M. Tanaka

    2022/09/08

  45. Weld Depth Estimation and Its Visualization of Judgement Basis by CNN Model through Molten Pool Monitoring in GMAW

    W. Tanahara, T. Matsumura, K. Nomura, T. Sano, S. Asai

    iiw2022 Annual Assembly 2022/07/19

  46. In-line Detection of Blowholes in Lap Joint Welding of Galvanized Steel Sheet by Laser Ultrasonic Technique and Its Robotic Application Using Microchip Laser

    K. Nomura, T. Matsuida, K. Kadota, S. Nitta, T. Era, S. Asai

    iiw2022 Annual Assembly 2022/07/20

  47. In-line Detection of Internal Defects for Lap Joint welding of Galvanized Steel Sheet by Laser Ultrasonic Technique

    K. Kadota, T. Matsuida, K. Nomura, T. Era, S. Asai

    IIW2022 International Conference on Welding and Joining 2022/07/18

  48. Study on Blowhole Detection in Fillet Welded Sheet of Lap Joint by Laser Ultrasonic Technique

    K. Nomura, T. Matsuida, K. Kadota, T. Era, S. Asai

    2022/04/13

  49. In-line Detection of Blowholes in Lap Joint Welding of Galvanized Steel Sheet by Laser Ultrasonic Technique

    K. Nomura, T. Matsuida, K. Kadota, T. Era, S. Asai

    IIW Commission I IV XII Intermediate Meeting 2022/03/22

  50. 溶融池インプロセス計測×AIによる溶込み深さ推定手法に関する研究

    K. Nomura, T. Matsumura, W. Tanahara, T. Sano, S. Asai

    2022/02/07

  51. Study on Blowhole Detection in Fillet Welded Sheet of Lap Joint by Laser Ultrasonic Technique

    K. Nomura, T. Matsuida, K. Kadota, T. Era, S. Asai

    2022/01/24

  52. Study on the Detection of Internal Defects in Fillet Welded Sheet of Lap Joint by Laser Ultrasonic technique

    K. Kadota, T. Matsuida, K. Nomura, T. Era, S.Asai

    JAAA2021 (Joining Technologies in Advanced Automobile Assembly 2021) 2021/11/30

  53. 溶融池モニタリングと深層学習を用いた溶込み深さ推定法に関する研究

    K. Nomura, T. Matsumura, W. Tanahara, T. Sano, S. Asai, T. Tsuyama, Y. Kotani, K. Fujiwara

    2021/11/04

  54. Measurement of spot weld joint quality using diffracted waves generated by laser ultrasonic technique

    MARUYAMA Takamitsu, HATTORI Kazunori, NOMURA Kazufumi

    2021/09/21

  55. Measurement of spot weld joint quality using diffracted waves generated by laser ultrasonic technique

    MISHIMA Shintaro, DENO Soshi, NOMURA Kazufumi, SANO Tomokazu

    2021/09/21

  56. Measurement of spot weld joint quality using diffracted waves generated by laser ultrasonic technique

    Kazufumi NOMURA, Satoru ASAI

    95th Laser Materials Processing Conference 2021/08/30

  57. 3D spectroscopic measurement of plasma temperature and metal vapor concentration in plasma-MIG hybrid welding process

    K. Ishida, S. Tashiro, K. Nomura, D. Wu, M. tanaka

    iiw2021 on-line annual assembly 2021/07/14

  58. 「新溶接アーク現象」発刊記念-概要説明- 第7章より: アーク溶接現象の可視化とシミュレーション

    K.Nomura

    2021/05/28

  59. Study on estimation of the weld penetration by deep learning model in weld pool monitoring (3rd Report)

    K. Nomura, T.Matsumura, T.Sano

    溶接学会R3年度春季全国大会 2021/04/14

  60. Study on Simultaneous Multipoint Measurement Method of Emissivity in Welding Process Monitoring

    Kazufumi Nomura, Hiroyuki Okuda, Tomokazu Sano, Satoru Asai

    Joint intermediate meeting of IIW Commissions I, IV, XII and SG 212 2021/03/30

  61. In-situ measurement of ultrasonic behavior during arc spot welding by laser ultrasonic technique

    Deno Soshi, Otaki Satoshi, Matsuida Taketo, Nomura Kazufumi, Sano Tomokazu, Asai Satoru

    28th Symposium on Ultrasonic Testing 2021/01/25

  62. In-Process Monitoring System of Weld Quality Using Laser Ultrasonic

    S. Asai, K. Nomura, T. Matsuida, S. Otaki

    2020 International Conference on Robotic Welding, Intelligence and Automation (RWIA'2020) & The 13th Chinese Conference on Robotic Welding (CCRW'2020) 2020/12/26

  63. Visualization of welding arc plasma by 3D spectroscopic measurement

    K. Nomura, S. Asai, Y. Hirata

    2020/11/27

  64. 溶融池モニタリングと深層学習を用いた開先マグ溶接の溶込み推定手法

    K. Nomura

    2020/11/17

  65. Study on in-situ measurement of melting phenomenon during arc spot welding by laser ultrasonic technique

    S. Deno, S. Otaki, T. Matsuida, K. Nomura, T. Sano, S. Asai

    溶接学会R2年度秋季全国大会 2020/09/09

  66. Development of in-situ measurement system with laser ultrasonic technique using microchip laser (2nd report)

    T. Matsuida, S. Otaki, K. Nomura, T. Sano, S. Asai

    溶接学会R2年度秋季全国大会 2020/09/09

  67. Study on Simultaneous Multipoint Measurement Method of Emissivity in Welding Process Monitoring

    H. Okuda, K. Nomura, T. Sano, S. Asai

    溶接学会R2年度秋季全国大会 2020/09/09

  68. Visualization of basis for decisions of the CNN model for penetration depth estimation in MAGW

    T. Matsumura, K. Fukushima, K. Nomura, T. Sano, S. Asai

    溶接学会R2年度秋季全国大会 2020/09/09

  69. Study on estimation of the weld penetration by deep learning model in weld pool monitoring (2nd report)

    K. Nomura, K. Fukushima, T. Matsumura, T. Sano, S. Asai

    溶接学会R2年度秋季全国大会 2020/09/09

  70. Fundamental study of the quality measurement for wire arc additive manufacturing process by laser ultrasonic technique

    K. Nomura, T. Matsuida, S. Otaki, S. Asai

    iiw2020 on-line annual assembly 2020/07/25

  71. Study on the weld penetration estimation by deep learning model with molten pool monitoring in GMA welding

    K. Nomura, K. Fukushima, T. Matsumura, S. Asai

    iiw2020 on-line annual assembly 2020/07/24

  72. Study on estimation of the weld penetration by deep learning model in weld pool monitoring

    K. Nomura, K. Fukushima, T. Matsumura, S. Asai

    溶接学会R2年度春季全国大会 2020/04/24

  73. レーザー超音波を用いた溶接中リアルタイム欠陥検知技術の開発

    第8回 レーザー学会「ユビキタス・パワーレーザー」専門委員会, 第8回 科学技術交流財団「マイクロ固体フォトニクス」研究会 2020/02/20

  74. Estimation of current and heat input density distribution of tilting TIG arc plasma by Spectroscopic method

    Atsushi AIBE, Kazufumi NOMURA, Satoru ASAI

    プラズマ・核融合学会 九州・沖縄・山口支部 第23回支部大会 2019/12/21

  75. Study on the in-situ measurement of the GMA welding quality of single groove bevel using laser ultrasonic

    Satoshi OTAKI, Taketo MATSUIDA, Kazufumi NOMURA and Satoru ASAI

    溶接構造シンポジウム2019 2019/12/04

  76. Development of in-situ measurement system with laser ultrasonic technique using microchip laser

    Taketo MATSUIDA, Ryosuke KITA, Satoshi OTAKI, Kazufumi NOMURA and Satoru ASAI

    溶接構造シンポジウム2019 2019/12/04

  77. Study on Burn-through Prediction by Molten Pool Monitoring and Deep Learning Model in Arc Welding Process

    Kazufumi NOMURA, Takumi MATSUMURA, Koki FUKUSHIMA, Satoru ASAI

    溶接構造シンポジウム2019 2019/12/03

  78. Burn-through Prediction Using Deep Learning Model in Single Bevel Groove Welding

    Koki FUKUSHIMA, Takumi MATSUMURA, Kazufumi NOMURA and Satoru ASAI

    Visual-JW 2019 and WSE 2019 2019/11/21

  79. Fundamental study for in-situ quality measurement of WAAM process by laser ultrasonic technique

    Taketo MATSUIDA, Ryosuke KITA, Satoshi OTAKI, Kazufumi NOMURA and Satoru ASAI

    Visual-JW 2019 and WSE 2019 2019/11/21

  80. Study of burn-through prediction in MAG arc welding using molten pool monitoring technique

    Takumi MATSUMURA, Kazufumi NOMURA and Satoru ASAI

    Visual-JW 2019 and WSE 2019 2019/11/21

  81. Development of in-situ measurement system for welding robot by laser ultrasonic with microchip laser

    Kazufumi NOMURA, Taketo MATSUIDA, Satoshi OTAKI, Ryosuke KITA and Satoru ASAI

    Visual-JW 2019 and WSE 2019 2019/11/21

  82. In-situ monitoring technique of the welding defects during GMA welding by using laser ultrasonic

    Satoshi OTAKI, Taketo MATSUIDA, Kazufumi NOMURA and Satoru ASAI

    Visual-JW 2019 and WSE 2019 2019/11/21

  83. Fundamental plasma diagnostic study for guiding TIG arc phenomenon by laser irradiation

    Hiroyuki OKUDA, Kazufumi NOMURA, Satoru ASAI, Shohei IWATA, Yasushi KITANI and Kenji OI

    Visual-JW 2019 and WSE 2019 2019/11/21

  84. Three-dimensional visualization of welding arc plasma by multi-colored and multi-directional spectroscopic measurement

    K. Nomura, S. Asai

    高速度イメージングとフォトニクスに関する総合シンポジウム2019(JCHSIP2019: Japan Congress on High Speed Imaging and Photonics 2019) 2019/11/16

  85. TIGアーク溶接中の表面計測を用いた溶込み深さの推定

    第248回溶接法研究委員会 2019/11/01

  86. Study on the on-line support system for welder

    S. Asai, Y. Ogino, K. Nomura, K. Hattori

    Progress in Digital and Physical Manufacturing (ProDPM '19) 2019/10/02

  87. レーザ超音波による溶接品質その場計測に関する研究(第3報)

    溶接学会R1年度秋季全国大会 2019/09/18

  88. レーザ超音波法を用いたWAAM品質のその場計測に向けた基礎検討

    溶接学会R1年度秋季全国大会 2019/09/18

  89. 溶融池モニタリング技術を用いたマグ溶接における溶落ち発生の予測に関する研究

    溶接学会R1年度秋季全国大会 2019/09/18

  90. レーザによるTIGアーク誘導現象のプラズマ診断による基礎検討

    溶接学会R1年度秋季全国大会 2019/09/18

  91. Monitoring technique of weld quality using laser ultrasonic IV: Development of robotic measurement system with microchip laser

    日本機械学会2019年度年次大会 2019/09/11

  92. Monitoring technique of weld quality using laser ultrasonic I: In-situ measurement of weld penetration depth during the welding process

    日本機械学会2019年度年次大会 2019/09/11

  93. Monitoring technique of weld quality using laser ultrasonic II: In-situ detection of weld defect during the welding process

    日本機械学会2019年度年次大会 2019/09/10

  94. In-situ detection of weld defect during the welding process by laser ultrasonic technique

    K. Nomura, S. Otaki, R. Kita, S. Asai

    2019 International Congress on Ultrasonics (2019 ICU) 2019/09/04

  95. Estimation of the weld penetration depth by the surface measurement in TIG arc welding

    K. Nomura, S. Yamashita, F. Imura, S. Asai

    72nd IIW Annual Assembly & International Conference (IIW2019) 2019/07/10

  96. In-situ Defect Detection System Using Laser Ultrasonic for Welding Robot

    S. Asai, K. Nomura, T. Matsuida, S. Otaki

    72nd IIW Annual Assembly & International Conference (IIW2019) 2019/07/08

  97. Laser ultrasonic system using microchip laser for in-situ detection of weld defect

    S. Asai, K. Nomura, T. Matsuida, S. Otaki

    The 7th Laser Ignition and Giant-microphotonics Conference 2019 (LIC2019) 2019/04/24

  98. マグ溶接アークプラズマの温度計測における連続光の影響評価

    溶接学会H31年度春季全国大会 2019/04/19

  99. マイクロチップレーザを用いたレーザ超音波その場計測システムの開発

    溶接学会H31年度春季全国大会 2019/04/19

  100. 溶接プロセスの計測・モニタリングにおけるスペクトル情報の活用

    溶接学会H31年度春季全国大会 2019/04/18

  101. 溶接熱源のモデル化とそれによる溶融池形成予測技術の開発

    溶接学会平成31年度春季全国大会シンポジウム「SIP:溶接部性能保証のためのシミュレーション技術の開発成果報告」 2019/04/17

  102. Influence of continuous radiation on the temperature measurement of MAG arc plasma

    Joint intermediate meeting of IIW Commissions I, IV, XII and SG 212 2019/03/04

  103. レーザ超音波による溶接欠陥のその場計測に関する研究

    第26回超音波による非破壊評価シンポジウム 2019/01/30

  104. レ型開先継手に対するレーザ超音波を用いた溶接欠陥のその場検出

    第245回溶接法研究委員会 2019/01/29

  105. 回転式水冷分割銅板を用いた傾斜TIGアークプラズマに対する電流・入熱密度分布のトモグラフィ計測

    プラズマ・核融合学会 九州・沖縄・山口支部 第22回支部大会 2018/12/15

  106. Ar-CO2混合ガス溶接プラズマの温度計測における連続光の影響評価

    プラズマ・核融合学会 九州・沖縄・山口支部 第22回支部大会 2018/12/15

  107. Visualization of the weld pool shape by laser ultrasonic technique in arc welding

    溶接学会H30年度秋季全国大会 2018/09/13

  108. Study on the in-situ measurement of the molten pool shape using a laser ultrasonic (4th report) -Weld pool depth monitoring of GMA welding-

    溶接学会H30年度秋季全国大会 2018/09/12

  109. Tomographic measurement of tilting TIG arc using rotational split water-cooled copper anode

    溶接学会H30年度秋季全国大会 2018/09/12

  110. Study on the in-situ measurement of the weld quality using laser ultrasonic, 2nd report

    溶接学会H30年度秋季全国大会 2018/09/12

  111. Tomographic measurement of the current and heat input densities for the axially asymmetric TIG arc plasma

    71st IIW Annual Assembly & International Conference (IIW2018) 2018/07/16

  112. In-situ Detection of Weld Defect Using Laser Ultrasonic

    71st IIW Annual Assembly & International Conference (IIW2018) 2018/07/16

  113. In-situ measurement of weld pool depth during TIG welding using laser ultrasonic

    Laser Ultrasonics 2018 2018/07/09

  114. 非軸対称ティグアークの電流・入熱密度分布のトモグラフィ計測

    第242回溶接法研究委員会 2018/05/14

  115. Study on the in-situ measurement of the weld quality using laser ultrasonic

    溶接学会H30年度春季全国大会 2018/04/24

  116. Estimation of the weld penetration by surface temperatures measurement in arc welding

    溶接学会H30年度春季全国大会 2018/04/24

  117. 三次元発光分光法による非軸対称溶接アークの可視化

    第26回 応用物理学会 プラズマエレクトロニクス分科会 プラズマ新領域研究会『熱プラズマの電磁熱流体構造を開拓する』 2018/01/27

  118. レーザ超音波による溶接中の溶融池計測に関する研究

    第25回超音波による非破壊評価シンポジウム 2018/01/25

  119. 三次元発光分光法による溶接アークプラズマの可視化

    日本学術振興会第153委員会研究会『高密度プラズマの計測技術~高密度プラズマの物理現象の 見える化技術~』 2018/01/18

  120. 混合ガスを用いた溶接アークプラズマの分光計測に関する研究

    プラズマ・核融合学会 九州・沖縄・山口支部 第21回支部大会 2017/12/16

  121. 炭酸ガスアーク溶接における非軸対称プラズマ挙動の発光分光計測

    プラズマ・核融合学会 九州・沖縄・山口支部 第21回支部大会 2017/12/16

  122. Study on the in-situ measurement of the weld quality using laser ultrasonic

    umiya IMURA, Ryosuke KITA, Kazufumi NOMURA and Satoru ASAI

    溶接構造シンポジウム2017 2017/12/05

  123. 3D spectroscopic measurement of arc plasma behavior of repelled transfer in CO2 arc welding

    溶接学会H29年度秋季全国大会 2017/09/12

  124. Study of 3D temperature measurement of arc plasma in MAG welding

    溶接学会H29年度秋季全国大会 2017/09/12

  125. Study on the in-situ measurement of the molten pool shape using a laser ultrasonic (3rd report)

    溶接学会H29年度秋季全国大会 2017/09/11

  126. A Study on Digitization of Welder's Skill (1st Report) -Welder's Motion Analysis Using Sensing Device-

    K. Nagaiwa, K. Hattori, R. Nakashima, S. Asai, K. Nomura

    平成29年度秋季溶接学会全国大会 2017/09/11

  127. 炭酸ガスアーク溶接における反発移行アーク挙動の三次元発光分光計測

    第239回溶接法研究委員会 2017/08/08

  128. In-situ Measurement of Weld Pool Configuration Using Laser Ultrasonic Technique

    70th IIW Annual Assembly & International Conference (IIW2017) 2017/06/28

  129. 3D spectroscopic measurement of arc plasma behavior in CO2 arc welding

    70th IIW Annual Assembly & International Conference (IIW2017) 2017/06/28

  130. Three dimensional spectroscopy of welding arc plasma by multidirectional simultaneous method (3rd report) -Influence of tomographic methods on the reconstructed distribution-

    溶接学会H29年度春季全国大会 2017/04/21

  131. Study on the in-situ measurement of the molten pool shape using a laser ultrasonic (2nd report)

    溶接学会H29年度春季全国大会 2017/04/21

  132. レーザ超音波を用いた溶融池形状その場計測の基礎的検討

    第24回超音波による非破壊評価シンポジウム 2017/01/26

  133. 溶接アークプラズマのトモグラフィ計測手法に関する研究

    プラズマ・核融合学会 九州・沖縄・山口支部 第20回支部大会 2016/12/17

  134. 溶接アークプラズマの三次元温度・金属蒸気濃度分布計測

    プラズマ・核融合学会 九州・沖縄・山口支部 第20回支部大会 2016/12/17

  135. レーザ超音波法を用いたインプロセスモニタリングシステムの開発

    第236回溶接法研究委員会 2016/11/29

  136. 音速補正を用いた溶融池形状の超音波映像化

    第38回超音波エレクトロニクスの基礎と応用に関するシンポジウム (USE2017) 2016/10/27

  137. Study on the in-situ measurement of the molten pool shape using a laser ultrasonic

    Visual-JW 2016 2016/10/17

  138. 3D Spectroscopic Measurement of Temperature Distribution in MIG Welding

    Visual-JW 2016 2016/10/17

  139. Measurement of surface tension supporting pendant drop of molten metal formed by arc discharge

    Visual-JW 2016 2016/10/17

  140. 3D temperature measurement of MIG arc plasma by multidirectional spectroscopic method

    10th International Conference on Trends in Welding Research & 9th International Welding Symposium of Japan Welding Society (9WS) 2016/10/13

  141. Study on In-situ Measurement of Weld Pool Configuration Using Laser Ultrasonic Technique

    10th International Conference on Trends in Welding Research & 9th International Welding Symposium of Japan Welding Society (9WS) 2016/10/12

  142. Study on the in-situ measurement of the molten pool shape using a laser ultrasonic

    Y. Mine, K. Nomura, T. Matsuda, S. Asai, T. Hoshi, A. Sugawara

    溶接学会H28年度秋季全国大会 2016/09/15

  143. レ型開先内における埋もれアーク溶接に関する研究

    H. Inoue, K. Nomura, S. Asai

    溶接学会H28年度秋季全国大会 2016/09/14

  144. 三次元発光分光法によるミグ溶接の温度計測

    第114回軽構造接合加工研究委員会 2016/09/09

  145. 多方向発光分光法によるミグ溶接の三次元温度・金属蒸気濃度計測

    第235回溶接法研究委員会 2016/08/02

  146. 3D measurement of temperature and metal vapor concentration in MIG arc plasma by multidirectional spectroscopic method

    69th IIW Annual Assembly & International Conference (IIW2016) 2016/07/13

  147. Development of In-situ Monitoring system for Weld Quality Using Laser Ultrasonic Technique

    69th IIW Annual Assembly & International Conference (IIW2016) 2016/07/12

  148. In-Process Imaging of Molten Pool Configuration

    Laser-Ultrasonics and Advanced Sensing (LU2016) 2016/07/08

  149. 3D spectroscopic measurement of temperature distribution in MIG welding

    K. Toda, K. Yoshii, K. Nomura, K. Mimura, Y. Hirata, S. Asai

    溶接学会H28年度春季全国大会 2016/04/13

  150. アーク放電により形成された金属液滴の表面張力の測定

    溶接学会H28年度春季全国大会 2016/04/13

  151. Application of Laser Ultrasonic Techinique to In-situ Monitoring System of Weld Quality

    S. Asai, K. Nomura, T. Ogawa, T. Hoshi, A. Sugawara, M. Ochiai

    IIW Joint intermediate meeting of Comm. I, IV, XII and SG212 2016/03/08

  152. 溶接アークの三次元分光法の開発

    溶接学会四国支部・溶接学会若手会員の会 共催 研究会・見学会 2015/11/12

  153. 非軸対称溶接アークの三次元分光計測

    第84回溶接研究会/第13期第1回溶射技術研究会 テーマ「溶接・溶射における可視化技術」 2015/10/29

  154. ミグアークの多方向同時三次元分光計測

    第232回溶接法研究委員会 2015/10/07

  155. 非軸対称溶接アークの三次元分光計測

    第21回 応用物理学会 プラズマエレクトロニクス分科会 プラズマ新領域研究会『プラズマ流の可視化』 2015/10/03

  156. Influence of the interference filter characteristics on the temperature measurement of welding arc by spectroscopic method

    K. Nomura, J. Nagata, Y. Hirata, S. Asai

    溶接学会 H27年度秋季全国大会 2015/09/04

  157. 3D spectroscopy measurement of argon and metal vapor in MIG welding (2nd Report)

    K. Yoshii, K. Nomura, K. Mimura, Y. Hirata

    溶接学会 H27年度秋季全国大会 2015/09/02

  158. Three Dimensional Spectroscopy of Welding Arc Plasma by Multidirectional Simultaneous Method, 2nd Report

    K. Mimura, K. Kataoka, K. Nomura, Y. Hirata

    溶接学会 H27年度春季全国大会 2015/04/24

  159. アーク溶接プロセス―発光分光法による熱源特性の可視化―

    溶接学会 H27年度春季全国大会 2015/04/23

  160. 非軸対称溶接アークの三次元分光計測

    プラズマ・核融合学会 九州・沖縄・山口支部 第18回支部大会 2014/12/01

  161. Estimation of the current density distribution of TIG arc plasma by spectroscopic method

    K. Yoshii, K. Nomura, and Y. Hirata

    Visual-JW2014 2014/11/01

  162. 3D spectroscopic observation of argon and metal vapor in MIG welding

    K. Kataoka, K. Mimura, K. Nomura, and Y. Hirata

    Visual-JW2014 2014/11/01

  163. 三次元発光分光法を用いたミグ溶接におけるアルゴン・金属蒸気の挙動観察

    片岡 耕太朗, 野村 和史, 平田 好則, 貴志 崇

    H26年度溶接学会秋季全国大会 2014/09/10

  164. Three dimensional spectroscopic measurement of argon and metal vapor behavior in MIG arc welding

    K. Nomura, K. Kataoka, T. Kishi, K. Yoshii and Y. Hirata

    67th IIW Annual Assembly & International Conference (IIW2014) 2014/07/14

  165. Three Dimensional Spectroscopy of Welding Arc Plasma by Multidirectional Simultaneous Method

    K. Nomura, T. Kishi, Y. Hirata, K. Yoshii

    H26年度春季溶接学会 2014/04/22

  166. Numelical analysis of TIG arc welding with filler wire feeding by simple model

    K. Kotaro, K. Nomura, Y. Ogino and Y. Hirata

    H25年度秋季溶接学会 2013/09/04

  167. Temperature Measurement of Asymmetrical Pulsed TIG Arc Plasma by Multidirectional Monochromatic Imaging Method

    K. Nomura, T. Kishi, K. Shirai and Y. Hirata

    66th IIW Annual Assembly & International Conference 2013/09/14

  168. Study of droplet transfer effects in simple model of GMA welding

    K. Nomura and Y. Hirata

    H25年度秋季溶接学会 2013/04/17

  169. 非軸対称アークの温度計測に関する研究

    野村和史

    H24年度第4回若手グループ研究会 2013/01/23

  170. Numerical Analysis of Arc Plasma to Weld Pool Formation by a Tandem TIG Arc

    Y. Ogino, J. Kawata, Y. Hirata and K. Nomura

    Visual-JW2012 2012/11/28

  171. 3D Temperature Measurement of a Tandem TIG Arc Plasma

    K. Nomura, T. Kishi, K. Shirai and Y. Hirata

    Visual-JW2012 2012/11/28

  172. 2電極TIGアークの温度計測に関する研究

    野村和史, 白井健太郎, 貴志崇, 荻野陽輔, 平田好則

    第220回溶接法研究委員会 2012/11/01

  173. Research on weld pool formation by two-electrode TIG arc 2nd report

    Y. Ogino, J. Kawata, K. Nomura and Y. Hirata

    H24年度秋季溶接学会 2012/09/26

  174. Temperature measurement of twin electrode TIG arc

    K. Shirai, T. Kishi, K. Nomura and Y. Hirata

    H24年度秋季溶接学会 2012/09/26

  175. Study on generation mechanism of weld imperfection in GMA welding

    T. Haga, K. Nomura and Y. Hirata

    H24年度秋季溶接学会 2012/09/26

  176. Temperature Measurement of a Tandem TIG Arc Plasma by Using Computed Tomography Method

    K. Nomura, T. Kishi, K. Shirai and Y. Hirata

    The 2nd East Asia Symposium on Technology of Welding & Joining (EAST-WJ) 2012/09/27

  177. 2電極ティグ溶接におけるアークプラズマ-溶融池の数値解析

    第219回溶接法研究委員会 2012/08/07

  178. Numerical analysis of arc plasma to weld pool formation by a tandem TIG arc

    Y. Ogino, J. Kawata, Y. Hirata and K. Nomura

    65th IIW Annual Assembly & International Conference 2012/07/09

  179. 3D temperature measurement of a tandem TIG arc plasma

    K. Nomura, T. Kishi, K. Shirai and Y. Hirata

    65th IIW Annual Assembly & International Conference 2012/07/09

  180. Research on weld pool formation by two-electrode TIG arc

    Y. Ogino, J, Kawata, K. Nomura and Y. Hirata

    H24年度春季溶接学会 2012/04/10

  181. Heat input and arc pressure distribution of TIG arc on V-groove surface

    ECO-MATES 2011 (International Symposium on Materials Science and Innovation for Sustainable Society -- Eco-materials and Eco-innovation for Global Sustainability --) 2011/11/28

  182. Development of spectroscopic measurement for non-axial symmetrical TIG arc plasma

    ECO-MATES 2011 (International Symposium on Materials Science and Innovation for Sustainable Society -- Eco-materials and Eco-innovation for Global Sustainability --) 2011/11/28

  183. Fundamental research on micro discharge process

    ECO-MATES 2011 (International Symposium on Materials Science and Innovation for Sustainable Society -- Eco-materials and Eco-innovation for Global Sustainability --) 2011/11/28

  184. Research on weld pool formation by magnetic controlled arc

    Y. Ogino, J. Kawata, K. Nomura and Y. Hirata

    H25年度春季溶接学会 2011/09/07

  185. Development of the predictable model for incomplete fusions in GMA welding

    Y. Yoshioka, K. Nomura and Y. Hirata

    H25年度春季溶接学会 2011/09/07

  186. Three Dimensional Temperature Measurement of TIG Arc Plasma

    T. Konishi, Y. Hirata, K. Nomura and K. Shirai

    64th International Institute of Welding Annual Assembly & International Conference (IIW2011) 2011/07/18

  187. Three Dimensional Temperature Measurement of the Gas Tungsten Arc Plasma

    The 1st East Asia Symposium on Technology of Welding & Joining (EAST-WJ) 2011/05/31

  188. Development on Magnetic Control of Arc Plasma in Gas Shielded Arc Welding, 5th report

    Y. Ogino, T. Haga, K. Nomura and Y. Hirata

    H23年度春季溶接学会 2011/04/22

  189. Fundamental research on micro arc process, 2nd report

    M. Park, K. Nomura and Y. Hirata

    H23年度春季溶接学会 2011/04/22

  190. Numerical Analysis on the Heat Source Characteristics of the Two-Electrodes TIG Arc

    Y. Ogino, Y. Hirata, K. Nomura

    Visual-JW2010 2010/11/11

  191. Fundamental Research on Micro Discharge Process -Research on Discharge of Sub-millimeter size Process-

    M. Park, Y. Hirata, K. Nomura

    Visual-JW2010 2010/11/11

  192. Influence of Magnet Configurations on Magnetic Controlled TIG Arc Welding

    K. Nomura, Y. Ogino, T. Haga, Y. Hirata

    Visual-JW2010 2010/11/11

  193. Cathode Phenomena of Gas ShieldedArc

    N. Furukawa, A. Sato, T. Higuchi, K. Nomura and Y. Hirata

    H23年度春季溶接学会 2010/09/09

  194. Fundamental research on micro arc process

    M. Park, Y. Hirata and K. Nomura

    H23年度春季溶接学会 2010/09/09

  195. 3D Numerical Model of Molten Metal Flow in Weld Pool

    Y. Ogino, K. Nomura, T, Hirano and Y. Hirata

    H23年度春季溶接学会 2010/09/09

  196. 3-D Measurement of Gas Tungsten Arc Plasma

    T. Konishi, K. Nomura and Y. Hirata

    H23年度春季溶接学会 2010/09/09

  197. Influence of Magnet Configurations on Magnetic Controlled TIG Arc Welding

    K. Nomura, Y. Ogino, T. Haga, K. Murakami, T. Hirano, Y. Hirata

    Annual Assembly of the International Institute of Welding (IIW) 2010 2010/07/13

  198. Numerical Analysis on the Heat Source Characteristics of the Two-Electrodes TIG Arc

    Y. Ogino, Y. Hirata, K. Nomura

    Annual Assembly of the International Institute of Welding (IIW) 2010 2010/07/12

  199. 3次元アークモデルの多電極溶接への適用

    Y. Ogino, K. Nomura and Y. Hirata

    H22年度春季溶接学会 2010/04/20

  200. Development on Magnetic Control of Arc Plasma in Gas Shielded Arc Welding, 4th report

    K. Nomura, K. Murakami, Y. Ogino, T. Hirano and Y. Hirata

    H22年度春季溶接学会 2010/04/20

  201. Features of Magnetic Controlled TIG Arc Plasma

    K. Nomura, Y. Ogino, K. Murakami, Y. Hirata

    International Seminar ‘Numerical Analysis of Weldability’ 2009/09/28

  202. Heat Input and Pressure Distribution of TIG Arc on Groove Surface

    Y. Ogino, Y. Hirata, K. Nomura

    Annual Assembly of the International Institute of Welding (IIW) 2009 2009/07/13

  203. 3次元アークモデルの開先部への適用

    Y. Ogino, K. Nomura and Y. Hirata

    H21年度春季溶接学会 2009/04/22

  204. Development of arc shape control method by cusp type magnetic field in gas shielded arc welding process

    K.Nomura, K.Morisaki, Y.Ogino, and Y.Hirata

    8th International Welding Symposium (8WS) 2008/11/17

  205. Development on Magnetic Control of Arc Plasma in Gas Shielded Arc Welding, 3rd report

    K. Nomura, K. Morisaki, Y. Ogino and Y. Hirata

    H20年度秋季溶接学会 2008/09/10

  206. Magnetic Control of Arc Plasma and Its Modeling

    K. Nomura, K. Morisaki and Y. Hirata

    61st Annual Assembly of the International Institute of Welding (IIW2008) 2008/07/06

  207. 3D Analysis on Magnetic Controlled Arc Plasma in Gas Shielded Arc Welding

    K. Nomura, K. Morisaki and Y. Hirata

    第170回アーク物理委員会 2008/05/28

  208. Development on Magnetic Control of Arc Plasma in Gas Shielded Arc Welding, 2nd report

    K. Nomura, K. Morisaki and Y. Hirata

    H20年度春季溶接学会 2008/04/08

  209. Development on Magnetic Control of Arc Plasma in Gas Shielded Arc Welding

    K. Nomura, K. Morisaki and Y. Hirata

    第168回アーク物理委員会 2007/11/30

  210. Development on Magnetic Control of Arc Plasma in Gas Shielded Arc Welding

    K. Nomura, K. Morisaki and Y. Hirata

    H20年度秋季溶接学会 2007/09/10

  211. Analysis of Second Harmonic Generation Considering Laser Absorption with Repetitive Irradiation

    Kazufumi Nomura, Etsuji Ohmura and Yoshinori Hirata

    International Conference on Coherent and Nonlinear Optics (ICONO 2005) 2006/05/11

  212. Distortion Analysis of Beam Profile and Pulse Shape of Second Harmonic During Repetitive Irradiation of Picosecond Pulses

    Etsuji Ohmura, Kazufumi Nomura and Isamu Miyamoto

    Photonics Europe 2004 2004/04/27

  213. Analysis on Conversion Efficiency and Beam Profile of Second Harmonic Generated by KTP

    Etsuji Ohmura, Kazufumi Nomura, Isamu Miyamoto

    22nd International Congress on Application of Laser & Electro-Optics, ICALEO2003 2003/10/13

  214. Influence of Temporal Pulse Shape on Second Har-monic Generation

    Etsuji Ohmura, Kazufumi Nomura, Isamu Miyamoto

    Fourth International Symposium on Laser Precision Microfabrication (LPM2003) 2003/06/21

  215. Theoretical Analysis of Second Harmonic Characteristics Generated by KTiOPO4 Crystal

    Kazufumi Nomura, Etsuji Ohmura, Alexander Horn, Isamu Miyamoto

    Fourth International Symposium on Laser Precision Microfabrication (LPM2003) 2003/06/21

  216. Theoretical Analysis of SHG Conversion Efficiency of Nonlinear Optical Crystal with Gaussian Beam Irradiation

    Kazufumi Nomura, Etsuji Ohmura, Isamu Miyamoto

    Third International Symposium on Laser Precision Microfabrication (LPM2002) 2003/05/27

  217. Influence of Laser Absorption by Nonlinear Optical Crystal on SHG Efficiency

    Etsuji Ohmura, Kazufumi Nomura, Isamu Miyamoto

    Third International Symposium on Laser Precision Microfabrication (LPM2002) 2003/05/27

  218. Theoretical Study on SHG Conversion Efficiency for Gaussian Beam and Control of Its Decline

    Kazufumi Nomura, Etsuji Ohmura, Isamu Miyamoto

    The International Congress on Applications of Lasers & Electro-Optics (ICALEO 2002) 2002/10/14

  219. Laser-Absorption Dependence of SHG Conversion Efficiency by Nonlinear Optical Crystal

    Etsuji Ohmura, Kazufumi Nomura, Isamu Miyamoto

    The International Congress on Applications of Lasers & Electro-Optics (ICALEO 2002) 2002/10/14

Industrial Property Rights 3

  1. 欠陥判定装置

    N.Furukawa, K. Kadota, S. Nitta, S. Asai, K. Nomura

    出願日:2022/01/21

  2. 欠陥判定装置

    N.Furukawa, K. Kadota, S. Nitta, S. Asai, K. Nomura

    出願日:2022/01/21

  3. 溶接検査装置、溶接システム、及び溶接検査方法

    S.Asai, K. Nomura, K. Kadota, T. Era

    出願日:2021/07/30

Media Coverage 2

  1. 未来を拓く産学連携/溶接機器メーカーの「ダイヘン」×大阪大学/「溶接内部欠陥自動検出ロボットシステム」/薄板(6ミリ以下)への適用実現/23年度中の製品化目指す

    2022/07/21

  2. 溶接欠陥の検出に成功 内閣府P,マイクロチップレーザ開発

    溶接ニュース

    2019/02

Academic Activities 7

  1. 第79回レーザ加工学会講演会(実行委員)

    2012/11 - 2013/05

  2. 溶接法セミナー「溶接プロセスの可視化・シミュレーション技術」 -知能化技術による溶接イノベーションへの挑戦-

    一般社団法人溶接学会, 溶接法研究委員会

    2013/12 -

  3. 平成25年度溶接技術講習会&若手の会による講習会

    溶接学会北海道支部 溶接学会若手会員の会 共催

    2013/07 -

  4. H23年度春季溶接学会・フォーラム「高信頼性Green溶接プロセス開発のための知能化技術-エコロジーとエコノミーが織りなす二つのeco-」

    社団法人 溶接学会

    2011/04 -

  5. 50周年特別委員会 第212回溶接法研究委員会 特別シンポジウム ~溶接の将来を担う技術開発・研究への挑戦~

    社団法人溶接学会, 溶接法研究委員会

    2010/11 -

  6. 材料プロセシングに関わる可視化の最前線

    大阪大学接合科学研究所

    2010/10 -

  7. 平成21年度溶接学会論文賞 受賞記念講演

    社団法人 溶接学会

    2010/09 -

Institutional Repository 7

Content Published in the University of Osaka Institutional Repository (OUKA)
  1. Effect of current waveform in MIG arc on weld bead formation in plasma-MIG hybrid welding

    Ishida Kazuya, Tashiro Shinichi, Nomura Kazufumi, Wu Dongsheng, Murphy Anthony B., Yuji Toshifumi, Tanaka Manabu

    International Journal of Advanced Manufacturing Technology Vol. 133 p. 811-820 2024/07/01

  2. Study on non-contact measurement method of resistance spot weld nugget diameter using laser ultrasonic technique

    Nomura Kazufumi, Mishima Shintaro, Deno Soshi, Sano Tomokazu

    NDT and E International Vol. 140 2023/12/01

  3. In situ measurement of ultrasonic behavior during lap spot welding with laser ultrasonic method

    Nomura Kazufumi, Deno Soshi, Matsuida Taketo, Otaki Satoshi, Asai Satoru

    NDT and E International Vol. 130 2022/09

  4. Influence of magnet configurations on magnetic controlled TIG arc welding

    Nomura Kazufumi, Ogino Yosuke, Haga Takuya, Hirata Yoshinori

    Transactions of JWRI Vol. 39 No. 2 p. 209-210 2010/12

  5. Numerical analysis on heat source characteristics of two-electrodes TIG arc

    Ogino Yosuke, Hirata Yoshinori, Nomura Kazufumi

    Transactions of JWRI Vol. 39 No. 2 p. 204-206 2010/12

  6. Fundamental research on micro discharge process : Research on discharge of sub-millimeter size process

    Mingon Park, Hirata Yoshinori, Nomura Kazufumi

    Transactions of JWRI Vol. 39 No. 2 p. 207-208 2010/12

  7. レーザ吸収に起因する非定常な波長変換の理論的解析と高変換効率化の検討

    野村 和史