Application of MPS Analysis Method to a T-shaped Mold in Injection Molding

INOUE Naoyuki, MIYASAKA Fumikazu, KURASHIKI Tetsusei, MUKOYAMA Kazutaka, YONEKURA Masahiro, SETO Masahiro, YAMABE Masashi

Journal of Smart Processing　Vol. 13　No. 4　p. 211-217　2024/07/10

Evaluation of mechanical characterization and deformation for filaments under sliding behavior

Takahiro IZUMI, Tetsusei KURASHIKI, Xingsheng LI, Kazutaka MUKOYAMA, Koushu HANAKI

Journal of Textile Engineering　Vol. 70　No. 3　p. 22-28　2024/06/15　Research paper (scientific journal)

Structure of Rust Layer of Pre-rusted Carbon Steel Coated with Cellulose Nanofiber Dispersion Coatings Containing Nickel Sulfate

Nohara Taro, Mukoyama Kazutaka, Kurashiki Tetsusei, Hanaki Koushu, Yamashita Masato, Tsuchiya Hiroaki, Fujimoto Shinji

Zairyo-to-Kankyo　Vol. 73　No. 6　p. 149-152　2024/06/10

Analysis of the Effects of Adopting “Imaginary Future Generations” on the Design of Technology Development and Business Proposal – a Case Study of Workshop at a Plating Processing

FUJITA Ken, KURASHIKI Tetsusei, HARA Keishiro, IKEDA Junji, NAKAMURA Takashi

Proceedings of Ecodesign 2023　p. 955-962　2023/11　Research paper (international conference proceedings)

A Study on the Effectiveness of Workshops for Proposition of Sustainable Business Based on Future Design

Fujita K, Tanahara W, Kurashiki T, Hara K, Ikeda J, Nakamura K

Proceedings of the Japan Conference on Structural Safety and Reliability 2023　p. 301-307　2023/10　Research paper (scientific journal)

Application of Futurability Education to the Promotion of Shokuiku

Tomohiro HOSOMI, Tetsusei KURASHIKI

Journal of JSEE　Vol. 71　No. 5　p. 5_23-5_30　2023/09　Research paper (scientific journal)

Effect of Cooling Condition on Microstructure after Unidirectional Solidification of Cu-Ni-Si Alloys

Yuki Muto, Kazuki Kammuri, Junji Miyake, Tetsusei Kurashiki, Hiroaki Mori

Journal of the Japan Institute of Metals and Materials　Vol. 87　No. 6　p. 200-204　2023/06/01　Research paper (scientific journal)

Evaluation of Damping Property of Woven Fabric Composites Based on Polyarylate-Fiber Under Cyclic Loading

Fujimoto Morio, Mukoyama Kazutaka, Kurashiki Tetsusei, Nakanishi Yasumasa, Kurata Seiya, Aso Yoshifumi, Kusuda Kazumasa

Journal of Textile Engineering　Vol. 69　No. 2　p. 17-24　2023/04　Research paper (scientific journal)

Analysis of the effectiveness of adopting Future Design on new business proposals from the perspective of future generations － A case study of a company

Hosomi T, Kondo G, Wakamoto K, Hara K, Kurashiki T

The Journal of Science Policy and Research Management　Vol. 38　No. 1　p. 113-129　2023/04　Research paper (scientific journal)

Effect of Volume Fraction on Damage Development Behavior of Thermoplastic Composites with Spread Yarn Structure and Conventional Yarn Structure

FUJIMOTO Mayu, MUKOYAMA Kazutaka, IYOTA Toa, HANAKI Koshu, KURASHIKI Tetsusei

Structural Safety and Reliability: Proceedings of the Japan Conference on Structural Safety and Reliability (JCOSSAR)　Vol. 10　p. 237-242　2023

Evaluation of Fiber and Resin Flow During Injection Molding of Fiber-Reinforced Plastics Based on Moving Particle Simulation Method: (Estimation for Effect of Resin Properties on Fiber Flow)

INOUE Naoyuki, MIYASAKA Fumikazu, KURASHIKI Tetsusei, MUKOYAMA Kazutaka, YONEKURA Masahiro

Structural Safety and Reliability: Proceedings of the Japan Conference on Structural Safety and Reliability (JCOSSAR)　Vol. 10　p. 243-249　2023

Effects of Design Parameters on Mechanical Properties and Proposal of Design map for Type 4 Hydrogen Storage Vessel

MUKOYAMA Kazutaka, SUGANO Moe, HANAKI Koushu, KURASHIKI Tetsusei

Structural Safety and Reliability: Proceedings of the Japan Conference on Structural Safety and Reliability (JCOSSAR)　Vol. 10　p. 231-236　2023

Future Design-Based Policy Making Card Game for High School Education

Shohei Nakamura, Tsubasa Ogata, Kazuhito Wakamoto, Tetsusei Kurashiki

EcoDesign for Sustainable Products, Services and Social Systems I　p. 59-70　2023　Part of collection (book)

Axial Force Measurement Using Digital Image Correlation

Takeshi INOUE, Takahiko SAWADA, Kohei TANAKA, Tetsusei KURASHIKI

Transactions of the JSME (in Japanese)　Vol. 88　No. 912　p. 22-00094-1-22-00094-15　2022/08　Research paper (scientific journal)

将来可能性教育に基づく人材育成の取組み

倉敷哲生

安全工学シンポジウム2022講演予稿集　p. OS14(13)-OS14(16)　2022/06　Research paper (conference, symposium, etc.)

繊維強化複合材料の射出成形における粒子法に基づく繊維流動評価

井上直生, 向山和孝, 宮坂史和, 倉敷哲生

日本繊維機械学会 第75回年次大会研究発表論文集　p. 200-201　2022/06　Research paper (conference, symposium, etc.)

フィラメントの力学的特性解析および変形挙動の評価

泉貴大, 李興盛, 向山和孝, 花木宏修, 倉敷哲生

日本繊維機械学会 第75回年次大会研究発表論文集　p. 194-105　2022/06　Research paper (conference, symposium, etc.)

繊維強化複合材料による水素蓄圧容器の設計パラメータが力学的特性に及ぼす影響

菅野萌, 李興盛, 向山和孝, 花木宏修, 倉敷哲生

日本繊維機械学会 第75回年次大会研究発表論文集　p. 190-191　2022/06　Research paper (conference, symposium, etc.)

Estimation of Fatigue Life of Woven FRP Laminate with 4 Layers Based on Numerical Analysis

Morio FUJIMOTO, Kazutaka MUKOYAMA, Xingsheng LI, Koshu HANAKI, Tetsusei KURASHIKI

Journal of Smart Processing　Vol. 11　No. 3　p. 141-146　2022/05/10　Research paper (scientific journal)

非ニュートン性を考慮した油脂の精密粘度の数値シミュ レーションに関する研究

津田航汰, 倉敷哲生

第13回 日本複合材料会議（JCCM-13）講演論文集　Vol. 2B09(1)　No. 2B09(4)　2022/03　Research paper (conference, symposium, etc.)

数値解析によるロボットアーム用複合ケーブルの撚り構造の応力評価

金清武, 李興盛, 向山和孝, 倉敷哲生, 礒嶋良人, 香下裕亮

第13回 日本複合材料会議（JCCM-13）講演論文集　p. 2B10(1)-2B10(4)　2022/03　Research paper (conference, symposium, etc.)

連続成形により作製された熱可塑性非連続炭素繊維強化複合材料における繊維状態の評価

安藤尚利, 向山和孝, 李興盛, 花木宏修, 倉敷哲生

第13回 日本複合材料会議（JCCM-13）講演論文集　Vol. 1A10(1)　No. 1A10(4)　2022/03　Research paper (conference, symposium, etc.)

易解体性を考慮した粘着材複合構造の設計開発および特性評価

園部裕哉, 倉敷哲生, 向山和孝, 内田徳之, 今宏樹

第13回 日本複合材料会議（JCCM-13）講演論文集　p. 1A07(1)-1A07(4)　2022/03　Research paper (conference, symposium, etc.)

Proposal of a Method for Searching Latent Needs in the Food Field based on Future Design

Hosomi T, Kondo G, Wakamoto K, Hara K, Kurashiki T

The Journal of Science Policy and Research Management　Vol. 37　No. 1　p. 63-77　2022/03　Research paper (scientific journal)

固有振動数および応力を目的関数としたGAによる複合材料設計変数最適化

布野 翔太, 倉敷 哲生, 向山 和孝, 李 興盛, 花木 宏修

M&M材料力学カンファレンス　Vol. 2022　2022

Futurability Education Based on Future Design

Tetsusei KURASHIKI

Journal of JSEE　Vol. 70　No. 2　p. 2_94-2_99　2022　Research paper (scientific journal)

フューチャー・デザインに基づく将来可能性教育

倉敷哲生

第33回信頼性シンポジウム 講演論文集　p. 87-92　2021/12　Research paper (conference, symposium, etc.)

有毒物質の漏洩事故におけるウォーターカーテンの減災効果に関する研究

村上奨, 倉敷哲生, 向山和孝, 石丸裕, 李興盛

第33回信頼性シンポジウム 講演論文集　p. 82-86　2021/12　Research paper (conference, symposium, etc.)

Effect of Ply Thickness on Damage Development Behavior of Thermoplastic Woven Fabric Composites Using Spread Yarns

FUJIMOTO Mayu, MUKOYAMA Kazutaka, LI Xingsheng, HANAKI Koushu, KURASHIKI Tetsusei

Journal of Textile Engineering　Vol. 67　No. 5　p. 91-98　2021/10　Research paper (scientific journal)

2D17 Workshop on Potential Needs of Food Market for Graduate Students and Business Person－Effects of Discussion on Imaginary Future Generation－

KONDO Genki, HOSOMI Tomohiro, WAKAMOTO Kazuhito, FUCHIGAMI Yukari, HARA Keishiro, KURASHIKI Tetsusei

Proceedings of Annual Conference of Japanese Society for Engineering Education　Vol. 2021　p. 236-237　2021/09　Research paper (conference, symposium, etc.)

画像解析を用いた熱可塑性繊維強化複合材料における繊維配向分布の同定

安藤尚利, 松本文也, 向山和孝, 李興盛, 花木宏修, 倉敷哲生

日本繊維機械学会 第74回年次大会研究発表論文集　Vol. 74　p. 73-74　2021/05　Research paper (conference, symposium, etc.)

粒子を用いた繊維強化複合材料の射出成形解析に関する研究

井上直生, 向山和孝, 宮坂史和, 倉敷哲生

日本繊維機械学会 第74回年次大会研究発表論文集　Vol. 74　p. 60-61　2021/05　Research paper (conference, symposium, etc.)

繊維強化複合材料を用いた大腿骨用人工股関節の基礎設計モデルに関する研究

岸本康希, 李興盛, 向山和孝, 花木宏修, 倉敷哲生

日本繊維機械学会 第74回年次大会研究発表論文集　Vol. 74　p. 50-51　2021/05　Research paper (conference, symposium, etc.)

金属塩を添加したCNF分散塗膜下における鋼材の腐食挙動

白數祐哉, 向山和孝, 李興盛, 花木宏修, 倉敷哲生, 山下正人, 藤本慎司

日本繊維機械学会 第74回年次大会研究発表論文集　Vol. 74　p. 48-49　2021/05　Research paper (conference, symposium, etc.)

Evaluation of Local Flow during Injection Molding of Fiber-reinforced Plastics via Moving Particle Semi-implicit Particle Simulation

KATO Hiroki, KURASHIKI Tetsusei, MUOYAMA Kazutaka, MIYASAKA Fumikazu, MITSUFUJI Kenta, SETO Masahiro, YAMABE Masashi

Vol. 47　No. 3　p. 89-96　2021/05　Research paper (scientific journal)

Fiber orientation evaluation of thermoplastic CFRP using fractal analysis

Fumiya MATSUMOTO, Kazutaka MUKOYAMA, Xingsheng LI, Koushu HANAKI, Tetsusei KURASHIKI

p. 2A-14(1)-2A-14(2)　2021/03　Research paper (conference, symposium, etc.)

Study on the structural design of Vertical Axis Wind Turbine support arms using fiber-reinforced composite materials

Xinran YU, Xingsheng LI, Kazutaka MUKOYAMA, Tetsusei KURASHIKI, Atsushi SHIMIZU, Shingo KOYAMA

p. 2C-07(1)-2C-07(2)　2021/03　Research paper (conference, symposium, etc.)

損傷進展解析に基づく織物GF/EP積層板の疲労寿命推定法

藤本森峰, 向山和孝, 李興盛, 花木宏修, 倉敷哲生

日本材料学会 2020年度JCOM若手ウェビナー研究要旨集　p. 40-41　2020/12　Research paper (conference, symposium, etc.)

数値モデリングと素線の疲労試験に基づく複合ケーブルの断線寿命評価に関する研究

李 興盛, 神鳥遼人, 向山和孝, 倉敷哲生

日本材料学会 2020年度JCOM若手ウェビナー研究要旨集　p. 44-45　2020/12　Research paper (conference, symposium, etc.)

A study on the dispersion behavior of gas leak considering mitigation effect by water curtain

Xingsheng LI, Akiyoshi YUSAKU, Kazutaka MUKOUYAMA, Hiroshi ISHIMARU, Tetsusei KURASHIKI

Vol. 32　p. 3-8　2020/12　Research paper (conference, symposium, etc.)

Study on evaluation of radiant heat of water surface oil fire with oil adsorbent

Kazutaka MUKOYAMA, Shohei KAWAKITA, Yusuke WADA, Xing sheng LI, Hiro shi ISHIMARU, Tetsusei KURASHIKI

Vol. 32　p. 17-21　2020/12　Research paper (conference, symposium, etc.)

フラクタル解析による熱可塑性 CFRP の繊維配向評価方法に関する研究

松本文也, 倉敷哲生

日本繊維機械学会 2020年度研究発表会　p. B1-03(1)-B1-03(2)　2020/11　Research paper (conference, symposium, etc.)

損傷進展解析に基づく FRP 積層材料のばらつきを考慮した疲労寿命評価に関する研究

藤本森峰, 倉敷哲生, 李興盛, 向山和孝

日本繊維機械学会 2020年度研究発表会　p. B1-04(1)-B1-04(2)　2020/11　Research paper (conference, symposium, etc.)

開繊繊維を用いた織物複合材料の損傷進展解析

藤本真由, 向山和孝, 李興盛, 花木宏修, 倉敷哲生

日本繊維機械学会 第73回年次大会 予稿集　Vol. 73　p. 54-55　2020/05　Research paper (conference, symposium, etc.)

複合材料を用いた垂直軸型風力発電機支持アームの設計に関する研究

于昕冉, 李興盛, 向山和孝, 花木宏修, 倉敷哲生

日本繊維機械学会 第73回年次大会研究発表論文集　Vol. 73　p. 52-53　2020/05　Research paper (international conference proceedings)

損傷進展解析に基づくFRP積層材料の疲労寿命評価における回帰モデルの適用に関する研究

藤本森峰, 倉敷哲生, 李興盛, 花木宏修, 向山和孝

日本繊維機械学会 第73回年次大会研究発表論文集　Vol. 73　p. 50-51　2020/05　Research paper (conference, symposium, etc.)

Evaluation of Fatigue Life of Flexible Cables for Robot Arms based on Numerical Analysis and Fatigue Test

Vol. 72　No. 2　p. 81-84　2020

Future Design-Based Risk Communication

T.Kurashiki

Japan SPOTLIGHT　2019/04

Risk Communication Based on Future Design

Yusuke TATEYAMA, Kenta KURASAWA, Masayoshi HIRAYAMA, Tetsusei KURASHIKI, Keishiro HARA

Journal of the Society of Materials Science, Japan　Vol. 68　No. 3　p. 265-270　2019/03/15　Research paper (scientific journal)

Outline of the Consequence Assessment Methods for the Leakage of Hazardous Materials from Chemical Equipment

ISHIMARU Hiroshi, MUKOYAMA Kazutaka, HANAKI Koshu, KURASHIKI Tetsusei

Vol. 58　No. 1　p. 36-49　2019/02

Study on CFRP-Aluminum adhesive bonding using adhesives with ceramic particles

Nakayama Yoshiaki, KURASHIKI Tessei, MUKOYAMA Kazutaka, HANAKI Koushu, LI Xingsheng

The Proceedings of the Materials and Mechanics Conference　Vol. 2019　2019

Analysis of Future Design Workshop on Disaster Prevention from the Perspective of Time Orientation

Yusuke TATEYAMA, Kenta KURASAWA, Masayoshi HIRAYAMA, Tetsusei KURASHIKI, Keishiro HARA

Journal of JSEE　Vol. 67　No. 3　p. 3_14-3_20　2019　Research paper (scientific journal)

Study on corrosion degradation of steel with CNF-dispersed resin

TANAKA Yuya, MUKOYAMA Kazutaka, KURASHIKI Tetsusei, LI Xingsheng, HANAKI Koushu, YAMASHITA Masato, FUJIMOTO Shinji

The Proceedings of the Materials and Mechanics Conference　Vol. 2019　No. 0　2019

Evaluation of local flow under injection molding of frp based on moving particle semi-implicit particle simulation method

Hiroki Kato, Tetsusei Kurashiki, Kazutaka Mukoyama, Koushu Hanaki, Xingsheng Li, Kenta Mitsufuji, Fumikazu Miyasaka

Journal of Textile Engineering　Vol. 64　No. 6　p. 175-178　2018/12　Research paper (scientific journal)

An evaluation of damage development for CFRTP by conventional tows and spread tows using acoustic emission

Takayuki Kinoshita, Tetsusei Kurashiki, Kazutaka Mukoyama, Koushu Hanaki, Masaru Zako, Xingsheng Li, Stepan V. Lomov

IOP Conference Series: Materials Science and Engineering　Vol. 406　No. 1　2018/09　Research paper (scientific journal)

A promising reinforcement for textile composites: Study on the effect of cellulose nanofiber (CNF) content on the mechanical properties of CNF reinforced epoxy resin

Xingsheng Li, K. Hanaki, X. Wang, T. Kurashiki, K. Mukoyama

IOP Conference Series: Materials Science and Engineering　Vol. 406　No. 1　2018/09　Research paper (scientific journal)

Estimation of shear strength of FRP joints using adhesives with ceramics particles

Tetsusei Kurashiki, Takumi Sakamoto, Koushu Hanaki, Kazutaka Mukoyama, Xingsheng Li

IOP Conference Series: Materials Science and Engineering　Vol. 406　No. 1　2018/09　Research paper (scientific journal)

Engineering education based on OJE (On the Job Education) method -30. Short-term fundamental and long-term practical education-

Tetsusei Kurashiki, Hiroyuki Takeda, Takashi Nakagawa, Satoshi Seino, Hiroaki Mori, Keisuke Uenishi

p. 430-431　2018/08

Effects of Stitching on Damage Development for Non-crimp Fabric Composites based on Multi-scale Analytical Method

T.Kurashiki, S.V.Lomov, I.Verpoest

Journal of Textile Engineering　2018/08　Research paper (scientific journal)

フューチャー・デザインに基づくリスクコミュニケーション

倉敷 哲生

学術の動向　2018/06

炭素繊維強化PEEK樹脂複合材を用いた大腿骨近位部固定ネイルの安全強度評価

高嶋和磨, 李 興盛, 倉敷哲生, 坂東舜一, 中原一郎, 高尾正樹, 坂井孝司, 菅野伸彦

臨床バイオメカニクス　2018/06　Research paper (scientific journal)

A Criterion of Wrinkle Generation under Molding of Carbon Fiber Reinforced Plastics

NAKAI Tomohiro, LI Xingsheng, MUKOYAMA Kazutaka, HANAKI Koushu, KURASHIKI Tetsusei, ZAKO Masaru, NISHIMURA Taichi, TORAO Sadami

Journal of Textile Engineering　Vol. 64　No. 3　p. 71-76　2018/06　Research paper (scientific journal)

Estimation of Adhesive Strength of Glass Fiber Reinforced Plastics Using Adhesive Materials with Ceramics Particles

Takumi SAKAMOTO, Tetsusei KURASHIKI, Kazutaka MUKOYAMA, Xingheng LI, Koushu HANAKI

Journal of Textile Engineering　Vol. 64　No. 2　p. 51-54　2018/03　Research paper (scientific journal)

Validation of an Integrated Approach of Future Design and Scenario Planning - A Case Study of Disaster Prevention Workshop -

Yusuke TATEYAMA, Kenta KURASAWA, Tetsusei KURASHIKI, Keishiro HARA

Journal of JSEE　Vol. 66　No. 2　p. 42-47　2018/03　Research paper (scientific journal)

Improvement of Fatigue Property in Thin Foil of Stainless Steels by Laser Heat Treatment

Takayuki Nishihara, Yoshiki Kamizono, Tetsusei Kurashiki, Hiroaki Mori

Journal of the Japan Institute of Metals and Materials　Vol. 82　No. 4　p. 117-120　2018/02　Research paper (scientific journal)

連携による研究開発・実用化の加速

倉敷哲生

繊維機械学会誌　2017/12

Issues on Electrification and Autonomous Driving for Automobiles

Tetsusei KURASHIKI

NTN technical review　No. 85　p. 2-13　2017/10

Fatigue Damage Analysis under Tensile Loading for Textile Composites

K. Mukoyama, K. Hanaki, T. Kurashiki

Extended abstract of 45th Textile Research Symposium　p. 25-25　2017/09　Research paper (international conference proceedings)

Study on the Damage Propagation under Three Point Bending for a Short Glass Fiber Reinforced Composites by an Injection Mold

X. Li, T. Kurashiki, M. Zako, K. Kobayashi, T. Yamamoto, G Yamada, T. Sakakibara

Extended abstract of 45th Textile Research Symposium　p. 26-26　2017/09　Research paper (international conference proceedings)

レーザ熱処理を用いたミクロ組織制御によるステンレス鋼箔の薄板の疲労寿命の改善

西原隆行, 神園知季, 森 裕章, 倉敷哲生

日本金属学会講演概要2017年秋期（第161回）講演大会　Vol. 161　p. 465-465　2017/09

Engineering Education based on OJE (On the Job Education) Method -28. Education effect by interdisciplinary themes exercises targeting communities-

Kazuhito Wakamoto, Hiroaki Mori, Tetsusei Kurashiki, Junji Ikeda, Hiroyuki Takeda, Atsuko Kaga

Proceedings of Annual Conference of Japanese Society for Engineering Education　Vol. 2017　p. 44-45　2017/08

Numerical simulation of damage propagation for a channel structure made of short glass fiber reinforced compositeS

Xingsheng Li, T. Kurashiki, M. Zako, K. Kobayashi, T. Yamamoto, G. Yamada, T. Sakakibara

ICCM International Conferences on Composite Materials　Vol. 2017-August　2017/08　Research paper (international conference proceedings)

Mechanical Properties and Microstructure of Cellulose Nanofiber (CNF) Reinforced Epoxy

X. Wang, K. Hanaki, T. Kurashiki, K. Mukoyoma, X. Li

2017/08　Research paper (international conference proceedings)

Study on Reduction of Radiation Heat Transfer of Thin Insulator at about 150 ℃

Vol. 6　No. 2　p. 95-101　2017/03　Research paper (scientific journal)

A numerical modeling of dry fabric based on cross section measurement of fiber bundle by X-ray CT

Maho FUJIKI, Kazutaka MUKOYAMA, Xingsheng Li, Kousyu HANAKI, Tetsusei KURASHIKI

The Proceedings of The Computational Mechanics Conference　Vol. 2017.30　2017

Effect of cellulose nanofiber content on the tensile and tensile shear characteristics of cellulose nanofiber reinforced composite resin

Wang Xudong, Hanaki K., Mukoyama K., Li Xingsheng, Kurashiki T.

The Proceedings of The Computational Mechanics Conference　Vol. 2017.30　2017

Study of Thermal Conductivity Measurement Method of Thin Insulation Material

Okazaki Toru, Oikawa Kazuma, Sakatani Shigeaki, Kurashiki Tetsusei

Netsu Bussei　Vol. 30　No. 2　p. 86-91　2016/12　Research paper (scientific journal)

Effects of near-infrared heating and high frequency induction roller heating in continuous tape layup molding of CFRTP

TANABE Daiki, IMAMURA Shota, NISHIYABU Kazuaki, KURASHIKI Tetsusei

Transactions of the JSME (in Japanese)　Vol. 82　No. 843　p. 16-00115-16-00115　2016/11　Research paper (scientific journal)

Study on the rigidity improvement of non-woven composite aerogel insulation material according to the non-woven fabric oriented design

OKAZAKI Toru, OIKAWA Kazuma, SAKATANI Shigeaki, KURASHIKI Tetsusei

Transactions of the JSME (in Japanese)　Vol. 82　No. 842　p. 16-00135-16-00135　2016/10　Research paper (scientific journal)

Effects of Fiber Reinforcement Pattern on High Frequency Induction Heating Behavior of Unidirectional and Woven CFRTP Laminates

Vol. 65　No. 8　p. 611-617　2016/08　Research paper (scientific journal)

Fiber and resin flow evaluation of short carbon fiber-reinforced composites using moving particle semi-implicit particle-simulation method

Mahiro Teratani, Kazutaka Mukoyama, Shuhei Matsuzawa, Kenta Mitsufuji, Fumikazu Miyasaka, Koushu Hanaki, Tetsusei Kurashiki

ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials　2016　Research paper (international conference proceedings)

Statistical Evaluation for S-N properties of Unidirectional Fiber-reinforced Plastic

Vol. 5　No. 1　p. 65-70　2016/01　Research paper (scientific journal)

Development of FE Modeling Technique of 3D-Woven Composite Materials and Mechanical Properties Evaluation

Vol. 5　No. 1　p. 39-45　2016/01　Research paper (scientific journal)

電子機構部品用スイッチばねにおける疲労寿命に関する研究

李興盛, 原裕貴, 向山和孝, 花木宏修, 倉敷哲生

JCOSSAR 2015論文集　p. 393-398　2015/10　Research paper (scientific journal)

繊維強化複合材料の傾斜ユニットモデルに基づく母材の材料非線形性を考慮した破壊包絡線評価

菊池隼太, 向山和孝, 鈴木拓也, 福重進也, 島村和夫, 花木宏修, 倉敷哲生

JCOSSAR 2015論文集　p. 414-419　2015/10　Research paper (scientific journal)

編物構造のモデル化に基づく編物複合材料の力学解析

若松栄史, 船原佑介, 森永英二, 荒井栄司, 田邉大貴, 倉敷哲生, 武内俊次

日本繊維機械学会第68回年次大会研究発表論文集・講演要旨集　p. 214-215　2015/06

Decision Method of Failure Rate and Its Probability Distribution for Components Composing of Products Using Incident Database of the Product

Harada Yasuo, Kurashiki Tetsusei

journal of the Japan Society for Testing Materials　Vol. 64　No. 3　p. 196-202　2015/03　Research paper (scientific journal)

Effects of processing conditions in unidirectional carbon fiber thermoplastic tape laying

D. Tanabe, K. Nishiyabu, T. Kurashiki

ICCM International Conferences on Composite Materials　Vol. 2015-　2015　Research paper (international conference proceedings)

Technique of Numerical Simulation for Composite Materials:IV : Numerical Modeling of Textile Composites

NAKANISHI Yasumasa, KURASHIKI Tetsusei

journal of the Japan Society for Testing Materials　Vol. 64　No. 5　p. 424-429　2015

Effects of processing parameters on electro-fusion joining of CF/PPS composites using carbon fiber heating elements

TANABE Daiki, NISHIYABU Kazuaki, KURASHIKI Tetsusei

TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A　Vol. 81　No. 826　p. 15-00005-15-00005　2015

Numerical modeling of acetabular reconstruction cages made of composite material and estimation of mechanical behavior for bone and cage

OKAZAKI Sho, KURASHIKI Tetsusei, HANAKI Koushu, MUKOYAMA Kazutaka, Li Xingsheng, SUGANO Nobuhiko, UEMURA Keisuke, BANDOH Shunichi

TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A　Vol. 81　No. 826　p. 15-00050-15-00050　2015

Single layered dry fabric forming simulation by finite element analysis

Nishi Masato, Hirashima Tei, Kurashiki Tetsusei

Journal of Textile Engineering　Vol. 60　No. 3　p. 51-59　2014/09/05　Research paper (scientific journal)

Modeling of Curling of Plain-Knitted Fabrics Toward It Suppression

Hidefumi Wakamatsu, Mari Inoue, Tetsusei Kurashiki, Eiji Morinaga, Eiji Arai, Shunji Takeuchi

Proceedings of ISCIE/ASME 2014 International Symposium on Flexible Automation　2014/07　Research paper (scientific journal)

Estimation of Mechanical Characteristics of Knitted Fabric Composites

Hidefumi Wakamatsu, Tetsusei Kurashiki, Eiji Morinaga, Eiji Arai, Shunji Takeuchi

Proceedings of ISCIE/ASME 2014 International Symposium on Flexible Automation　2014/07　Research paper (scientific journal)

カーリング形状推定のための糸の物性からの編地の物性の予測

若松栄史, 山田直哉, 井上真理, 倉敷哲生, 森永英二, 荒井栄司, 武内俊次

日本繊維機械学会第67回年次大会研究発表論文集・講演要旨集　p. 208-209　2014/06

編物複合材料の力学解析のための編目形状モデリング

若松栄史, 船原佑介, 倉敷哲生, 森永英二, 荒井栄司, 武内俊次

日本繊維機械学会第67回年次大会研究発表論文集・講演要旨集　p. 206-207　2014/06

A Method for Modeling of Knitted Loops in A Plain Stitch Fabric and Simulation of Its Curling and Wale Skew

Hidefumi Wakamatsu, Mari Inoue, Tetsusei Kurashiki, Eiji Morinaga, Eiji Arai, Shunji Takeuchi

Journal of Textile Engineering　Vol. 60　No. 3　p. 41-50　2014/06　Research paper (scientific journal)

平編み地におけるカーリング現象のモデリング

若松栄史, 井上真理, 倉敷哲生, 森永英二, 荒井栄司

せんい　Vol. 67　No. 3　p. 183-188　2014/03

Optimum parameters on electro fusion joining of CF/PPS composites by carbon fiber heating elements

D. Tanabe, K. Nishiyabu, T. Kurashiki

Proceedings of the American Society for Composites - 29th Technical Conference, ASC 2014; 16th US-Japan Conference on Composite Materials; ASTM-D30 Meeting　2014　Research paper (international conference proceedings)

Electro fusion joining of carbon fiber reinforced thermoplastic composites using carbon fiber heating element

D. Tanabe, K. Nishiyabu, T. Kurashiki

16th European Conference on Composite Materials, ECCM 2014　2014　Research paper (international conference proceedings)

Multi-scale modeling and estimation of damage development for textile composites considering meso/micro scale structures

Tetsusei Kurashiki, Yoshitaka Matsushima, Keisuke Ikuta, Hayata Kikuchi, Satoru Hirosawa, Kazutaka Mukoyama, Satoshi Hanaki, Masaru Zako

16th European Conference on Composite Materials, ECCM 2014　2014　Research paper (international conference proceedings)

Numerical modeling of acetabular reconstruction cages made of CFRP and estimation of mechanical behavior for bone and cage

Sho Okazaki, Tetsusei Kurashiki, Nobuhiko Sugano, Keisuke Uemura, Shunichi Bandoh

16th European Conference on Composite Materials, ECCM 2014　2014　Research paper (international conference proceedings)

Electro-fusion behavior of CF/PPS laminates using Ni-Cr wire resistance heating element

TANABE Daiki, NISHIYABU Kazuaki, KURASHIKI Tetsusei

TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A　Vol. 80　No. 815　p. SMM0189-SMM0189　2014

Effect of Reverse-Transformed Austenite on Fatigue Property of Stainless Steel Foil

MANIWA Hirofumi, YOSHIMI Kazuma, KURASHIKI Tetsusei, MORI Hiroaki

Preprints of the National Meeting of JWS　Vol. 2014　p. 236-237　2014

Dry Fabric Forming Analysis Considering the Influence of Tensions on In-plane Shear Behavior

NISHII Masato, HIRASHIMA Tei, KURASHIKI Tetsusei

journal of the Japan Society for Testing Materials　Vol. 63　No. 5　p. 380-385　2014

Estimation Method of Fatigue Life Distribution for Woven Composites Based on Numerical Analysis of Damage Development

MUKOYAMA Kazutaka, HANAKI Koushu, KURASHIKI Tetsusei, KAIZU Koichi

journal of the Japan Society for Testing Materials　Vol. 63　No. 5　p. 386-393　2014

Effects of Fiber Reinforcing Configuration on Oxidation and Melting Phenomenon of CF/PPS Laminated Composites by Electrically-Conducting

TANABE Daiki, NISHIYABU Kazuaki, KURASHIKI Tetsusei

journal of the Japan Society for Testing Materials　Vol. 63　No. 5　p. 368-373　2014

編物複合材料の力学的特性のシミュレーション

若松栄史, 倉敷哲生, 森永英二, 荒井栄司, 武内俊次

せんい　Vol. 67　No. 1　p. 29-34　2014/01

平編み地におけるカーリング現象のモデリング

若松栄史, 井上真理, 倉敷哲生, 森永英二, 荒井栄司, 武内俊次

日本繊維機械学会第66回年次大会研究発表論文集・講演要旨集　p. 228-229　2013/05

編物複合材料の力学的特性のシミュレーション

若松栄史, 山口遼太, 倉敷哲生, 森永英二, 荒井栄司, 武内俊次

日本繊維機械学会第66回年次大会研究発表論文集・講演要旨集　p. 146-147　2013/05

Mechanical Characterization of Filaments Based on Rotary Bending Test

KURASHIKI Tetsusei, LIU Baiyu, LI Xingsheng, NAKANISHI Yasumasa

Journal of Textile Engineering　Vol. 59　No. 2　p. 37-42　2013/03　Research paper (scientific journal)

Effects of Design Parameters on Click Characteristics of A Round-Type Diaphragm for Push Momentary Switch

LI Xingsheng, KURASHIKI Tetsusei, FUKUDA Masao

JAMDSM　Vol. 7　No. 2　p. 268-281　2013/02　Research paper (scientific journal)

Estimation of resin flow for FRP base on MPS method

S. Nodomi, T. Kurashiki, Z. Guo, G. Yoshikawa, F. Miyasaka

ICCM International Conferences on Composite Materials　Vol. 2013-　p. 2981-2988　2013　Research paper (international conference proceedings)

Evaluation of damage development for ncf composites with a circular hole based on multi-scale analysis

T. Kurashiki, Y. Matsushima, Y. Nakayasu, M. Zako

ICCM International Conferences on Composite Materials　Vol. 2013-　p. 2937-2944　2013　Research paper (international conference proceedings)

Proposal of designable space of diaphragm made of thin stainless steel for electrical assemblies considering clicking behavior and fatigue life

Xingsheng Li, T. Kurashiki, Masao Fukuda

Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures - Proceedings of the 11th International Conference on Structural Safety and Reliability, ICOSSAR 2013　p. 5421-5427　2013　Research paper (international conference proceedings)

Positive Activities for Education and Research by Collaboration

KURASHIKI Tetsusei

journal of the Japan Society for Testing Materials　Vol. 62　No. 4　p. 296-296　2013

Study on Mechanical Properties of a CFRP woven laminates with Spread Tow

Y.Watanabe, T.Kurashiki

Proc. of 8th Asian-Australasian Conference on Composite Materials　2012/11　Research paper (international conference proceedings)

Estimation of Mechanical Characteristics for Unidirectional FRP based on Oblique Unit Model considering Random Arrangement of Filaments

H . Yamatsuka, T . Kurashiki, Y . Fujita

Proc. of 8th Asian-Australasian Conference on Composite Materials　2012/11　Research paper (international conference proceedings)

Fusion Behavior of Continuous Fiber Reinforced Thermoplastic Composites in Electro-fusion Welding

D. Tanabe, S.Tsutaya, K. Nishiyabu, T. Kurashiki

Proc. of 8th Asian-Australasian Conference on Composite Materials　2012/11　Research paper (international conference proceedings)

A study on a management system for pursuing product safety of consumer electronics products using hazard based assessment

Harada Y, Waris N, Kurashiki T

Product Compliance Engineering (ISPCE), 2012 IEEE Symposium on Digital Object Identifier　2012/10　Research paper (international conference proceedings)

Effect of Microstructure on Cyclic Fatigue Property in Stainless Steel Foil

SAKAUE Masanobu, MORI Hiroaki, KURASHIKI Tetsusei, LI Xingsheng

Preprints of the National Meeting of JWS　Vol. 91　p. 172-173　2012/09/03

Effects of stithing parameters on damage development for non-crimp fabric composiets under tensile loading

T. Kurashiki, T.Watanabe, Y.Matsushima, M.Zako, S.Lomov, I.Verpoest

Proc. of 15th European Conference on Composite Materials(ECCM-15)　2012/06　Research paper (international conference proceedings)

Numerical Analysis of Damage Development for Woven Fabric Composite under Off-Axis Loading

FUJITA Yuzo, KURASHIKI Tetsusei

journal of the Japan Society for Testing Materials　Vol. 61　No. 5　p. 434-440　2012/05　Research paper (scientific journal)

Improvement of Cyclic Fatigue Property in Thin Sheet of Stainless Steel by Laser Irradiation

MORI Hiroaki, XU Shuang, KURASHIKI Tetsusei, SAKAUE Masanobu, LI Xingsheng, FUJITA Yuzo

Preprints of the National Meeting of JWS　Vol. 2012s　p. 198-199　2012/04

Effects of stitching parameters on damage development for non-crimp fabric composites under tensile loading

T. Kurashiki, T. Watanabe, Y. Matsushima, M. Zako, S. Lomov, I. Verpoest

ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials　2012　Research paper (international conference proceedings)

Application of monte carlo simulation to reliability design

Satoshi Hanaki, Tetsusei Kurashiki

Toraibarojisuto/Journal of Japanese Society of Tribologists　Vol. 56　No. 11　p. 686-691　2011/11/15　Research paper (scientific journal)

The Characterization of Electronic State from Surface to Several Nanometer Region on MgO:Si Thin Film

Mikihiko Nishitani, Mutsumu Fukada, Yukihiro Morita, Masaharu Terauci, Tetsusei Kurashiki, Hiroki Tsuchiura, Yasushi Yamauchi

Proceeding of 2011 MRS Fall Meeting　2011/11　Research paper (scientific journal)

信頼性設計におけるモンテカルロシミュレーションの活用

花木聡, 倉敷哲生

トライボロジスト　2011/11

Hazard Base Safety Assessment for Consumer Electric Household Products

Yasuo Harada, Tetsusei Kurashiki

Proc. of IEEE Symposium on Product Compliance Engineering（ISPCE2011)　2011/10　Research paper (scientific journal)

ＯＪＥによる工学教育－１４．情報分析法基礎の紹介－

松村暢彦, 倉敷哲生, 小俣哲夫轟修

第59回工学教育研究講演会　2011/09

Estimation of Mechanical Behaviors for Textile Composites based on Multi-scale Analysis

Tetsusei Kurashiki, Yuki Watanabe, Masaru Zako

Proc. of 18th International Conference on Composite Materials (ICCM-18)　2011/08　Research paper (international conference proceedings)

A Proposal of FE Modeling of Unidirectional Composite Considering Uncertain Micro Structure

Yuzo Fujita, Tetsusei Kurashiki, Hiroto Yamatsuka, Masaru Zako

Proc. of 18th International Conference on Composite Materials (ICCM-18)　2011/08　Research paper (international conference proceedings)

Estimation of Mechanical Behavior of Braided Composites based on Mesh Superposition Method

D.Ohyama, T.Kurashiki, Y.Watanabe, Y.Fujita, M.Zako

Proc. of 18th International Conference on Composite Materials (ICCM-18)　2011/08　Research paper (international conference proceedings)

大規模タンク火災のふく射熱シミュレーションシステムに基づく安全性評価手法に関する研究

小末祐輝, 倉敷哲生, 生和光朗, 花木聡, 座古勝

日本学術会議 第7回 構造物の安全性・信頼性に関するシンポジウム論文集 A論文　2011/07　Research paper (scientific journal)

電子機構部品用小判型ダイヤフラムのクリック特性及び設計可能領域に関する研究

李興盛, 倉敷哲生, 藤田雄三, 座古勝, 福田正夫

日本学術会議 第7回 構造物の安全性・信頼性に関するシンポジウム論文集 A論文　2011/07　Research paper (scientific journal)

経営リスク削減の一環としての製造管理手法の研究 ―均質性評価チャートの提案と化成品への適用―

北廣和雄, 倉敷哲生, 座古勝

日本学術会議 第7回 構造物の安全性・信頼性に関するシンポジウム論文集 A論文, pp.518-523　2011/07　Research paper (scientific journal)

Estimation Method of Transverse Strength of Uni-Directional Composites Considering the Random Arrangement of Filaments

Yuzo FUJITA, Tetsusei KURASHIKI

journal of the Japan Society for Testing Materials　Vol. 60　No. 5　p. 402-407　2011/05　Research paper (scientific journal)

平編み構造を有する繊維複合材料の力学解析に関する研究

山口遼太, 若松栄史, 森永英二, 荒井栄司, 藤田雄三, 渡部祐樹, 倉敷哲生, 竹内俊次

日本繊維機械学会第６４回年次大会講演論文集　2011/05

A Numerical Simulation of Mechanical Characteristics for Textile Composites based on Multi-scale Analysis

Tetsusei KURASHIKI, Yuki WATANABE, Yuzo FUJITA, Tatsuya WATANABE, Masaru ZAKO

Joint Conference on 11th Deformation and Fracture of Composites (DFC-11) and Structural Integrity and Multi-scale Modelling (SI-5)　2011/04　Research paper (international conference proceedings)

Study of a Practical Approach for Risk Evaluation on Quality Problem

Kazuo KITAHIRO, Tetsusei KURASHIKI, Masaru ZAKO

TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A　Vol. 77　No. 775　p. 1099-1108　2011/03　Research paper (scientific journal)

Report on "JSMS COMPOSITES Young Researcher Symposium, 2010"

KURASHIKI Tetsusei, NISHIYABU Kazuaki

journal of the Japan Society for Testing Materials　Vol. 60　No. 3　p. 273-273　2011

On an Estimation of Damage Development for Non Crimp Fabric Composites based on Mesh Superposition Method

Tetsusei KURASHIKI, Yuzo FUJITA, Yuki WATANABE, Masaru ZAKO

7th Asia-Australasian Conference on Composite Materials (ACCM-7)　2010/11　Research paper (international conference proceedings)

Estimation of mechanical behaviors for FRP cup in artificial hip joint under press-fit loading

Hayato OKA, Tetsusei KURASHIKI, Masaru ZAKO, Shunichi BANDO

7th Asia-Australasian Conference on Composite Materials　Vol. 2010　p. 41-42　2010/11　Research paper (international conference proceedings)

Proposal of the Method for FE Analysis of Woven Angle Ply Laminates Based on M3

FUJITA Yuzo, WATANABE Yuki, KURASHIKI Tetsusei, ZAKO Masaru

Journal of Textile Engineering　2010/11　Research paper (scientific journal)

Mechanical characteristics of woven angle-ply laminatebased on multi-scale analysis

Yuki WATANABE, Tetsusei KURASHIKI, Yuzo FUJITA, Masaru ZAKO

7th Asia-Australasian Conference on Composite Materials (ACCM-7)　2010/10　Research paper (international conference proceedings)

Study on Method of Quality Control on Risk Evaluation - A Proposal on Risk Evaluation Method Based on Preparation and Application of Quality Problem Map –

Kazuo KITAHIRO, Tetsusei KURASHIKI, Masaru ZAKO

14th International Conference on Mechanical Technology　2010/10　Research paper (international conference proceedings)

A Simulation on Damage Progression of Stitched Textile Composites based on Multi-scale Analysis

Tetsusei Kurashiki, Yuzo Fujita, Yuki Watanabe, Masaru Zako

10th International Conference on Textile Composites (TexCOMP-10)　p. 28-35　2010/10　Research paper (international conference proceedings)

Engineering Education based on OJE (On the Job Education) method - Part XI: Education of Technology Design in Dep. Management of Industry and Technology, Osaka University -

Keisuke UENISHI, Tetsusei KURASHIKI, Etsuji OHMURA, Masaru ZAKO, Takehiko SATO

JSEE annual conference proceedings　2010/08　Research paper (other academic)

A Numerical Simulation of Damage Development for Non-Crimp Fabric Composites based on Multi-scale Analysis

Tetsusei KURASHIKI, Shintaro HONDA, Masaru ZAKO

14th European Conference on Composite Materials (ECCM-14)　2010/06　Research paper (international conference proceedings)

On the transverse strength of Unidirectional Composite based on FEM considering randomness of fiber arrangement

Yuzo FUJITA, Tetsusei KURASHIKI, Masaru ZAKO

14th European Conference on Composite Materials (ECCM-14)　2010/06　Research paper (international conference proceedings)

Evaluation of mechanical characterization for artificial hip joint cup considering various surface shapes

ITO Takaaki, KURASHIKI Tetsusei, ZAKO Masaru, OKA Hayato, BANDO Shun-ichi

The proceedings of the JSME annual meeting　Vol. 2010　p. 39-40　2010

Engineering Education based on OJE (On the Job Education) method : Exercise for Anan-shi, Tokushima, Japan

KAGA Atsuko, KURASHIKI Tetsusei, MORI Hiroaki, MATSUMURA Nobuhiko, YAMAMOTO Takao, OHMURA Etsuji, UENISHI Keisuke

ITE Technical Report　Vol. 34　p. 7-10　2010

Development of Simulation System for Heat Radiation of Tank Fire based on Monte Carlo Method

Tetsusei Kurashiki, Hiroyuki Ueda, Yoshiki Yamanoi, Masaru Zako

Journal of Japan Society for Safety Engineering　Vol. 49　No. 1　p. 20-27　2010/01　Research paper (scientific journal)

Identification Method of Material Damping Parameters for Textile Composites

Y. Nakanishi, K. Matsumoto, T. Kurashiki, M. Zako

RECENT ADVANCES IN TEXTILE COMPOSITES　p. 256-+　2010　Research paper (international conference proceedings)

Technical Background of Sampling Method on Research and Testing (Statistics and Probabiity)

Tetsusei Kurashiki

2009/10

Effect of Micro Structure on Mechanical Properties of Woven Fabric Composites

Yuzo Fujita, Tetsusei Kurashiki, Masaru Zako

10th International Conference on Structural Safety and Reliability　2009/09　Research paper (international conference proceedings)

Development of Simulation System for Hazardous Area caused by Disaster in Petrochemical Plants

Hiroyuki Ueda, Tetsusei Kurashiki, Masaru Zako

10th International Conference on Structural Safety and Reliability　2009/09　Research paper (international conference proceedings)

Safety Evaluation of Thermal Radiation from Tank Fire in Petrochemical Plants based on Monte Carlo Method

Yoshiki Yamanoi, Tetsusei Kurashiki, Hiroyuki Ueda, Masaru Zako

10th International Conference on Structural Safety and Reliability　2009/09　Research paper (international conference proceedings)

ＯＪＥ法による工学教育－徳島県阿南市をフィールドとした演習－

倉敷哲生, 森 裕章, 加賀有津子, 松村暢彦, 大村悦二, 上西啓介

(社)日本工学教育協会 平成21年度 工学・工業教育研究講演会講演論文集　2009/08

Mechanical Behaviors of Non-Crimp Fabric Composites Based on Multi-scale Analysis

Tetsusei Kurashiki, Kenta Hamada, Shintaro Honda, Masaru Zako, Stepan Lomov, Ignass Verpoest

International Conference on Composite Materials　2009/07　Research paper (international conference proceedings)

A Proposal of FE Modeling for Off-Axis Woven Fabric Laminate

Yuzo Fujita, Yuki Watanabe, Tetsusei Kurashiki, Masaru Zako

17th International Conference on Composite Materials　2009/07　Research paper (international conference proceedings)

Study on Surface Treatment of Artificial Hip Joint Cup made of FRP

NA Daero, KURASHIKI Tetsusei, ZAKO Masaru, OKA Hayato, BANDO Shun-ichi

The proceedings of the JSME annual meeting　Vol. 2009　p. 11-12　2009

Estimation of mechanical properties of pelvis by micro-indentation

OKA Hayato, KURASHIKI Tetsusei, ZAKO Masaru, BANDO Shun-ichi

The proceedings of the JSME annual meeting　Vol. 2009　p. 13-14　2009

Mechanical characteristics of off-axis laminate of woven composites based on multi-scale analysis

WATANABE Yuki, FUJITA Yuzo, KURASHIKI Tetsusei, ZAKO Masaru

The proceedings of the JSME annual meeting　Vol. 2009　p. 1-2　2009

Microscopic Residual Stress Simulation in Welds by Multi-Scale Analysis Method

SOGABE Keisuke, MIKAMI Yoshiki, KURASHIKI Tetsusei, MOCHIZUKI Masahito

Preprints of the National Meeting of JWS　Vol. 2009　No. 0　p. 116-116　2009

Disaster Simulation in Chemical Plants Considering Diffusion of Gas and Heat Radiation from Tank Fire

Tetsusei KURASHIKI, Masaru ZAKO

14th World Conference on Eathquake Engineering　2008/12　Research paper (international conference proceedings)

Risk Estimation for Chemical Plants considering Domino Effects based on Disaster Simulation

Tetsusei KURASHIKI, Tohru NOMURA, Masatoshi FUMITA, Masaru ZAKO

17th International Corrosion Congress　2008/10　Research paper (international conference proceedings)

A Study on Mechanical Behavior of Bone and Acetabular Cup in Artificial Hip Joint Using FRP

Koji YASUI, Masaru ZAKO, Tetsusei KURASHIKI, Hideki YOSHIKAWA, Nobuhiko SUGANO, Shun-ichi BANDOH

2008/09　Research paper (international conference proceedings)

Effect of Fiber Arrangement in Unidirectional FRP on the Mechanical Property

Yuzo FUJITA, Tetsusei KURASHIKI, Masaru ZAKO

2008/09　Research paper (international conference proceedings)

Damage development of Non-Crimp Fabric GFRP laminate under tensile loading

Shintaro HONDA, Tetsusei KURASHIKI, Kenta HAMADA, Masaru ZAKO

2008/09　Research paper (international conference proceedings)

Study on Numerical Modeling System for Non Crimp Fabric Composites

Kenta HAMADA, Tetsusei KURASHIKI, Shintaro HONDA, Masaru ZAKO

6th Asian-Australasian Conference of Composite Materials (ACCM-6)　2008/09　Research paper (international conference proceedings)

A Proposal of Stress/Strain Analytical Procedure of Textile Composites with Stitch by M3 Method

Shintaro HONDA, Tetsusei KURASHIKI, Kenta HAMADA, Masaru ZAKO

2008/06　Research paper (scientific journal)

A NUMERICAL SIMULATION OF DAMAGE DEVELOPMENT FOR LAMINATED WOVEN FABRIC COMPOSITES

Tetsusei Kurashiki, Yujiro Momoji, Hiroaki Nakai, Masaru Zako

13th European Conference on Composite Materials　2008/06　Research paper (scientific journal)

A risk estimation for chemical plants considering domino effects based on disaster simulation

Tetsusei Kurashiki, Masaru Zako, Tohru Nomura, Masatoshi Fumita

17th International Corrosion Congress 2008: Corrosion Control in the Service of Society　Vol. 5　p. 2942-2954　2008　Research paper (international conference proceedings)

FEA of textiles and textile composites: A gallery

S. V. Lomov, D. S. Ivanov, V. Koissin, I. Verpoest, M. Zako, T. Kurashiki, H. Nakai

Proceedings of the 9th International Conference on Textile Composites - TEXCOMP9: Recent Advances in Textile Composites　p. 184-192　2008　Research paper (international conference proceedings)

Mechanical characterization of FRP considering uncertainness of micro structures

Fujita Yuzo, Kurashiki Testusei, Nakai Hiroaki, Zako Masaru

The proceedings of the JSME annual meeting　Vol. 2008　p. 303-304　2008

Study on FE Analysis for Stitched UD Laminates with opening resin region

Hamada Kenta, KURASHIKI Tetsusei, ZAKO Masaru, NAKAI Hiroaki

The proceedings of the JSME annual meeting　Vol. 2008　p. 301-302　2008

Material Damping Simulation of Textile Composites by Finite Element Analysis

Y. Nakanishi, K. Matsumoto, M. Zako, T. Kurashiki, S. V. Lomov, I. Verpoest

RECENT ADVANCES IN TEXTILE COMPOSITES　p. 499-+　2008　Research paper (international conference proceedings)

Full-field strain measurements for validation of meso-FE analysis of textile composites

Stepan V. Lomov, Dmitry S. Ivanov, Ignaas Verpoest, Masaru Zako, Tetsusei Kurashiki, Hiroaki Nakai, Jerome Molimard, Alain Vautrin

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING　Vol. 39　No. 8　p. 1218-1231　2008　Research paper (scientific journal)

Safety Evaluation based on Disaster Simulation in Chemical Plants (Part II: Study on Gas Diffusion considering Time History of Wind)

Masatoshi FUMITA, Tetsusei KURASHIKI, Masaru ZAKO

Asia Pacific Symposium on Safety　2007/11　Research paper (scientific journal)

Safety Evaluation based on Disaster Simulation in Chemical Plants (Part I: Study on Heat Radiation from Tank Fire)

Tetsusei KURASHIKI, Masatoshi FUMITA, Masaru ZAKO

Asia Pacific Symposium on Safety　p. 121-124　2007/11　Research paper (scientific journal)

Meso-FE modelling of textile composites: Road map, data flow and algorithms

Stepan LOMOV, Dimtry S. IVANOV, Ignass VERPOEST, Masaru ZAKO, Tetsusei KURASHIKI, Hiroaki NAKAI, Satoru HIROSAWA

Composites Science and Technology　2007/07　Research paper (scientific journal)

DAMAGE DEVELOPMENT OF WOVEN COMPOSITES BASED ON MULTI-SCALE ANALYSIS

Tetsusei Kurashiki, Masaru Zako, Hiroaki Nakai, Makoto Imura, Satoru Hirosawa

16th International Conference on Composite Materials　2007/07　Research paper (scientific journal)

FATIGUE LIFE EVALUATION OF BOLT MADE OFWOVEN FABRIC FRP

Takeshi INOUE, Hiroaki NAKAI, Tetsusei KURASHIKI, Masaru ZAKO, Yuji KOMETANI

16th International Conference on Composite Materials　2007/07　Research paper (scientific journal)

ON A DESIGN METHOD OF COMPOSITES STEMBASED ON CT IMAGES

Takeshi KAWAMURA, Masaru ZAKO, Tetsusei KURASHIKI, Hiroaki NAKAI, Takafumi FURUTA, Nobuhiko SUGANO, Hideki YOSHIKAWAa, Shun'ichi BANDOH

16th International Conference on Composite Materials　2007/07　Research paper (scientific journal)

INDIVIDUAL MODELING OF COMPOSITE MATERIALSWITH MESH SUPERPOSITION METHOD UNDERPERIODIC BOUNDARY CONDITION

Hiroaki NAKAI, Tetsusei KURASHIKI, Masaru ZAKO

16th International Conference on Composite Materials　2007/07　Research paper (scientific journal)

A numerical reliability design method of winding vesselsbased on damage mechanics

Yoshitaka Sakata, Masaru Zako, Tetsusei Kurashiki, Hiroaki Nakai, Shirou Nishibu, Masataka Sugahara

16th International Conference on Composite Materials　2007/07　Research paper (scientific journal)

A Numerical Evaluation Method for Pressure vessels made from CFRP considering strength distribution of anisotropy

Masaru ZAKO, Tetsusei KURASHIKI, Hiroaki NAKAI, Yoshitaka SAKATA, Shirou NISHIBU

2007/06　Research paper (scientific journal)

Safety Evaluation based on Disaster Simulation of Gas Diffusion in Chemical Plants Considering Change of Direction and Velocity of Wind

Masatoshi Fumita, Tetsusei Kurashiki, Hiroaki Nakai, Masaru Zako

2007/06　Research paper (scientific journal)

Mechanical Behaviors for Textile Composites by FEM based on Damage Mechanics

Tetsusei KURASHIKI, Hiroaki NAKAI, Satoru HIROSAWA, Makoto IMURA, Masaru ZAKO, Ignass VERPOEST, Stepan LOMOV

ADVANCES IN COMPOSITE MATERIALS AND STRUCTURES, PTS 1 AND 2　Vol. 334-335　p. 257-+　2007/03　Research paper (scientific journal)

A Proposal of Calculation Method for Equivalent Property of Composite Materials

Hiroaki NAKAI, Hiromasa TOMIOKA, Tetsusei KURASHIKI, Masatu ZAKO

ADVANCES IN COMPOSITE MATERIALS AND STRUCTURES, PTS 1 AND 2　Vol. 334-335　p. 241-+　2007/03　Research paper (scientific journal)

A Multi-scale Analysis for an Evaluation of the Mechanical Properties of Composite Materials

Makoto IMURA, Tetsusei KURASHIKI, Hiroaki NAKAI, Masaru ZAKO

ADVANCES IN COMPOSITE MATERIALS AND STRUCTURES, PTS 1 AND 2　Vol. 334-335　p. 585-+　2007/03　Research paper (scientific journal)

Study on Stiffness Design Method of Femoral Prosthesis Stem using Fiber Reinforced Composites

Takeshi KAWAMURA, Tetsusei KURASHIKI, Hiroaki NAKAI, Masaru ZAKO, Nobuhiko SUGANO, Hideki YOSHIKAWA

ADVANCES IN COMPOSITE MATERIALS AND STRUCTURES, PTS 1 AND 2　Vol. 334-335　p. 1257-+　2007/03　Research paper (scientific journal)

A numerical reliability design method of winding vessels based on damage mechanics

Yoshitaka Sakata, Masaru Zako, Tetsusei Kurashiki, Hiroaki Nakai, Shirou Nishibu, Masataka Sugahara

ICCM International Conferences on Composite Materials　2007　Research paper (international conference proceedings)

Study on Finite Element Modeling of Woven Composite Laminates

MOMOJI Yujiro, KURASHIKI Tetsusei, NAKAI Hiroaki, ZAKO Masaru

The proceedings of the JSME annual meeting　Vol. 2007　p. 225-226　2007

Study on damage development for braided composites under static tensile loading

Hamada Kenta, KURASHIKI Tetsusei, NAKAI Hiroaki, ZAKO Masaru

The proceedings of the JSME annual meeting　Vol. 2007　p. 223-224　2007

Study on Identification of mechanical properties for tooth based on micro-indentation method

KANEDA Kazuki, NAKAI Hiroaki, KURASHIKI Tetsusei, ZAKO Masaru

The proceedings of the JSME annual meeting　Vol. 2007　p. 217-218　2007

On an Application of Identification Method of Bone Mechanical Property by using CT Images considering Variation to Numerical Analysis

KAWAMURA Takeshi, ZAKO Masaru, KURASHIKI Tetsusei, NAKAI Hiroaki, FURUTA Takafumi, SUGANO Nobuhiko, YOSHIKAWA Hideki

The proceedings of the JSME annual meeting　Vol. 2007　p. 179-180　2007

An Evaluation of Fatigue Strength for Bolt made of GFRP

INOUE Takeshi, NAKAI Hiroaki, KURASHIKI Tetsusei, ZAKO Masaru

The proceedings of the JSME annual meeting　Vol. 2007　p. 179-180　2007

Modeling and Strength Evaluation of Fiber Reinforced Composites in Micro and Meso-scales

NAKAI Hiroaki, KURASHIKI Tetsusei, ZAKO Masaru

The proceedings of the JSME annual meeting　Vol. 2007　p. 229-230　2007

Finite Element Analysis of Progressive Fracture Behaviors for Spread Woven Fabric Composite Materials

Yasutomo UETSUJI, Toshio MATSUKA, Tetsusei KURASHIKI, Masaru ZAKO

THEORETICAL AND APPLIED MECHANICS JAPAN　2006/12　Research paper (scientific journal)

トルコ朱子織強化複合材料のメゾ損傷挙動解析

上辻靖智, 下山岳宏, 松屋俊夫, 倉敷哲生, 座古勝

Vol. 52　No. 2　p. 67-72　2006/11　Research paper (scientific journal)

A Proposal of M3 method to Multi-scale Analysis of Fibrous Composites

Masaru ZAKO, Tetsusei KURASHIKI, Hiroaki NAKAI, Makoto IMURA

2006/09　Research paper (scientific journal)

A Practical Numerical Simulation System of Mechanical Behaviors for Textile Composites

Tetsusei KURASHIKI, Masaru ZAKO, Hiroaki NAKAI, Satoru HIROSAWA, Makoto IMURA

2006/09　Research paper (scientific journal)

Estimation Method of Damping Properties for Woven Fabric Composites

中西康雅, 松本金矢, 座古勝, 倉敷哲生

日本機械学会論文集 C編　Vol. 72　No. 719　p. 2042-2047　2006/07　Research paper (scientific journal)

マルチスケール解析におけるM3法の提案(第2報，熱伝導問題に対する定式化)

座古勝, 倉敷哲生, 久保太, 松岡俊樹

日本機械学会論文集(A編)　2006/06　Research paper (scientific journal)

拡散・火災・爆発災害を考慮した化学プラントの災害シミュレーション手法の開発

座古勝, 倉敷哲生

科学技術振興費 大都市大震災軽減化特別プロジェクト 平成17年度成果報告書　2006/05　Research paper (bulletin of university, research institution)

Ｘ線ＣＴによる繊維補強セメント系材料のひび割れ検出

座古勝, 倉敷哲生, 中井啓晶

廃棄体開発調査 成果報告書　2006/03　Research paper (bulletin of university, research institution)

水素燃料電池自動車用７０ＭＰａ級プラスチック高圧容器の開発

座古勝, 倉敷哲生, 中井啓晶

平成１７年度地域新生コンソーシアム研究開発事業 成果報告書　2006/03　Research paper (bulletin of university, research institution)

On a Practical Exercise with OJE (On the Job Education)

Masaru ZAKO, Kunihiro NARUMI, Takehiko SATO, Takao YAMAMOTO, Keisuke HAMA, Kouji YANABU, Hiroshi SHINOHARA, Masato MURATA, Atsuko KAGA, Keisuke UENISHI, Nobuhiko MATSUMURA, Takashi NAKAGAWA, Tetsusei KURASHIKI

Journal of Japanese Society for Engineering Education　Vol. 56　No. 4　2006/03　Research paper (scientific journal)

Study on In-situ Observation of Ionic Migration and Life Estimation

Toshiki MATSUOKA, Tetsusei KURASHIKI, Atsushi ISHII, Hiroaki NAKAI, Masaru ZAKO

2006/02

Effective heat transfer analysis by mesh superposition method

Futoshi Kubo, Masaru Zako, Tetsusei Kurashiki

Materials Science Forum　Vol. 512　p. 373-378　2006　Research paper (international conference proceedings)

Proposition of M3 method on multi-scale analysis (2nd report, formulation of M3 method for heat conduction problem)

Masaru Zako, Tetsusei Kurashiki, Futoshi Kubo, Toshiki Matsuoka

Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A　Vol. 72　No. 6　p. 843-848　2006　Research paper (scientific journal)

Finite element analysis of mezoscopic damage behaviors of Turkey satin woven fabric composite materials

Yasutomo Uetsuji, Takehiro Shimoyama, Toshio Matsuka, Tetsusei Kurashiki, Masaru Zako

Journal of Textile Engineering　Vol. 52　No. 2　p. 67-72　2006　Research paper (scientific journal)

An Evaluation and Analysis of Damage Process in Femoral Prosthesis Stem made from FRP

KAWAMURA Takeshi, NAKAI Hiroaki, KURASHIKI Tetsusei, ZAKO Masaru, SUGANO Nobuhiko, YOSHIKAWA Hideki

The proceedings of the JSME annual meeting　Vol. 2006　p. 547-548　2006

On a Damage Development of a Woven Composites with Spread Tow

KURASHIKI Tetsusei, ZAKO Masaru, NAKAI Hiroaki, HIROSAWA Satoru, IMURA Makoto

The proceedings of the JSME annual meeting　Vol. 2006　p. 539-540　2006

Calculation method of equivalent property with the mesh superposition method for composite materials

NAKAI Hiroaki, KURASHIKI Tetsusei, TOMIOKA Hiromasa, ZAKO Masaru

The proceedings of the JSME annual meeting　Vol. 2006　p. 545-546　2006

On a development of a supporting system for finite element modeling and design of woven fabric composites

HIROSAWA Satoru, KURASHIKI Tetsusei, NAKAI Hiroaki, ZAKO Masaru, LOMOV Stepan, VERPOEST Ignasas

The proceedings of the JSME annual meeting　Vol. 2006　p. 541-542　2006

An Evaluation of the damage propagations of woven fabrics by M^3 method

IMURA Makoto, KURASHIKI Tetsusei, NAKAI Hiroaki, ZAKO Masaru

The proceedings of the JSME annual meeting　Vol. 2006　p. 537-538　2006

Evaluation on Distribution of Fatigue Life with Crack Initiation and Propagation Basaed on Propability Theory

Hiroaki NAKAI, Tetsusei KURASHIKI, Masaru ZAKO

Transactions of the Japan Society of Mechanical Engineers, Series A　Vol. 71　No. 711　p. 1494-1499　2005/11　Research paper (scientific journal)

化学プラントの気体拡散による被害想定領域の推定

座古勝, 倉敷哲生, 文田成俊

ケミカルエンジニヤリング　Vol. 50　No. 11　p. 848-853　2005/11　Research paper (scientific journal)

Thermal Stress Analysis by Mesh Superposition Method(2nd Report,Handling of Thermal and Viscoelastic Behavior)

Masaru ZAKO, Shinya HAYASHI, Tetsusei KURASHIKI, Futoshi KUBO

Transactions of the Japan Society of Mechanical Engineers Series B　Vol. 71　No. 710　p. 1306-1311　2005/10　Research paper (scientific journal)

A multi-scale analysis for structural design of fibrous composites - M3 method -

M.Zako, T.Kurashiki, F.Kubo, M.Imura

15th International Conference on Composite Materials　2005/06　Research paper (scientific journal)

A numerical simulation of woven fabric composites by FEM based on damage mechanics

T.Kurashiki, M.Zako, S.Hirosawa, M.Imura, S.V.Lomov, I.Verpoest

15th International Conference of Composites Materials　2005/06　Research paper (scientific journal)

On decision of design criteria considering fatigue strength distribution on ultra high cycle region

S.Hanaki, M.Yamashita, H.Uhida, M.Zako, T.Kurashiki

Safety and Reliability of Engineering Systems and Structure　2005/06　Research paper (scientific journal)

A practical estimation method of safety and reliability for chemical plants

T.Kurashiki, M.Zako, M.Fumita

Safety and Reliability of Engineering Systems and Structure　2005/06　Research paper (scientific journal)

A new approach of reliability evaluation of a diaphragm in switch module made of thin plate

H.Nakai, M.Zako, T.Kurashiki, M.Fukuda

Safety and Reliability of Engineering Systems and Structures　2005/06　Research paper (scientific journal)

拡散・火災・爆発災害を考慮した化学プラントの災害シミュレーション手法の開発

座古勝, 倉敷哲生

科学技術振興費 大都市大震災軽減化特別プロジェクト 平成16年度成果報告書　2005/05　Research paper (bulletin of university, research institution)

高分子系複合材料の自己修復

座古勝, 倉敷哲生

金属　Vol. 75　No. 4　p. 332-338　2005/04　Research paper (scientific journal)

CFRP積層材の低エネルギ衝撃損傷に関する研究（第2報，損傷力学に基づく数値解析手法の適用）

倉敷哲生, 座古勝, 椎野努, 林禎彦

日本機械学会論文集　2005/04　Research paper (scientific journal)

On Evaluation Method of Damage Development for CFRP Laminates under Low Impact Energy : 1st Report, Estimation of Residual Strength based on Static Bending Test after Occurrence of Damage

KURASHIKI Tetsusei, ZAKO Masaru, KEYAKIDA Tokinari

Transactions of the Japan Society of Mechanical Engineers Series B　Vol. 71　No. 704　p. 656-662　2005/04　Research paper (scientific journal)

Intelligent Composite Materials System Aiming at the Repair of Damages in FRP Structures

M.Zako, T.Kurashiki, H.Nakai, K.Miyamura

The 3rd NIMS International Conference　2005/03

大都市大震災軽減化プロジェクト―プラント災害シュミレータの開発

倉敷哲生, 座古勝

生産と技術　2005/02　Research paper (scientific journal)

An Influence of Atomosphere on Identification Method of Vibration Damping Parameters for Fiber Reinforced Plastics

Masaru Zako, Kin'ya, Matsumoto, Tetsusei Kurashiki, Yasumasa Nakanishi

日本機械学会論文集 C編　Vol. 71　No. 702　p. 386-391　2005/02　Research paper (scientific journal)

On evaluation method of damage development for CFRP laminates under low impact energy (2nd report, application of numerical analysis based on damage mechanics)

Tetsusei Kurashiki, Masaru Zako, Tsutomu Shiino, Yoshihiko Hayashi

Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A　Vol. 71　No. 4　p. 663-669　2005　Research paper (scientific journal)

Satisfaction Methodologies for Distributed Design Support System

ZAKO Masaru, KURASHIKI Tetsusei, Noritsune Masahumi

The proceedings of the JSME annual meeting　Vol. 2005　p. 311-312　2005

Development of a Design System for Total Hip Replacement by using CT Images

ZAKO Masaru, KURASHIKI Tetsusei, YOSHIKAWA Hideki, SUGANO Nobuhiko, KAWAMURA Takeshi

The proceedings of the JSME annual meeting　Vol. 2005　p. 313-314　2005

A M-cube analysis of damage development for woven fabric composites

ZAKO Masaru, KURASHIKI Tetsusei, IMURA Makoto

The proceedings of the JSME annual meeting　Vol. 2005　p. 387-388　2005

A finite element modeling of 3D woven structures and development of an estimation system of mechanical characterization for textile composites

ZAKO Masaru, KURASHIKI Tetsusei, HIROSAWA Satoru, Lomov Stepan V., Verpoest Ignaas

The proceedings of the JSME annual meeting　Vol. 2005　p. 391-392　2005

On Reliability Evaluation of a Structure for Fatigue under Service Loads with Rain Flow Method and Fatigue Limit Diagram

Masaru ZAKO, Tetsusei KURASHIKI, Hiroaki NAKAI

JOURNAL OF THE SOCIETY OF MATERIALS SCIENCE JAPAN Vol.54, No.1,(2005-1),8-12　2005/01　Research paper (scientific journal)

Development of A Computer Program on Disaster Simulation for Chemical Plants Considering Tank Fire, Explosion and Gas Diffusion

Masaru Zako, Tetsusei Kurashiki

Japan Association for Fire Science and Engineering,Vol.54,No.6,(pp37-42)　2004/12　Research paper (scientific journal)

Three-Dimensional Finite Element Analysis of Plan Woven Fabric Composites Based on Damage Mechanics. Effect of Geometric Change in Opened Yarns on Damage Development

Y.Uetsuji, T.Kurashiki, M.Zako

Transactions of the Japan Society of Mechanical Engineers,Vol.57, No.2,pp45-51　2004/11　Research paper (scientific journal)

Three-Dimensional Finite Element Analysis of Plan Woven Fabric Composites Based on Damage Mechanics. Effect of Geometric Change in Opened Yarns on Damage Development", , (2004-11)

Y.Uetsuji, T.Kurashiki, M.Zako

Transactions of the Japan Society of Mechanical Engineers,Vol.57, No.2,pp45-51　2004/11　Research paper (scientific journal)

On a Numarical Simulation of the Mechanical Behavior for Laminated Woven Fabric Composites under Tensile Loading

Tetsusei Kurashiki, Satoru Hirosawa, Masaru Zako, Stepan Lomov, Ignass Verpoest

The 11th US-Japan Conference on Composite Materials and The 7th International Conference on Textile Composite　2004/09　Research paper (scientific journal)

Study on Damage Development of Woven Fabric Composites with Spread Tow

Tetsusei Kurashiki, Masaru Zako, Yoshihiko Hayashi, Ignass Verpoest

Proceeding of The Fourth Asian-Australasian Conference of Composite Materials　2004/07　Research paper (scientific journal)

Estimation of a mechanical characterization for woven fabric composites by FEM based on damage mechanics

Tetsusei Kurashiki, Masaru Zako, Satoru Hirosawa, Stepan Lomov, Ignass Verpoest

Proceedings of 11th European Conference of Composite Materials　2004/06　Research paper (scientific journal)

散・火災・爆発災害を考慮した化学プラントの災害シミュレーション手法の開発

座古勝, 倉敷哲生

科学技術振興費 大都市大震災軽減化特別プロジェクト 平成15年度成果報告書　2004/05　Research paper (bulletin of university, research institution)

Effect of Mismatch of Stacking Phase on Damage Development of Plain Woven Fabric Composite Materials

Y.Uetsuji, Y.Ishiwari, M.Zako, T.Kurashiki, I.Verpoest

JOURNAL OF THE SOCIETY OF MATERIALS SIENCE JAPAN Vol.53,No.4,pp403-409　Vol. 53　No. 4　p. 403-409　2004/04　Research paper (scientific journal)

Application of Fiber Reinforced Composite Materials to Femoral Component for Hip Joint Replacement

Masaru Zako, Tetsusei Kurashiki, Hideki Yoshikawa, Nobuhiko Sugano, Takeshi Kawamura

2004/04　Research paper (scientific journal)

Measurement of material damping properties of triaxial. Woven fabric composites in low-pressure condition

Masaru Zako, Tetsusei Kurashiki, Yasumasa Nakanishi, Kin'ya Matsumoto

Composites Technologies For 2020　p. 1076-1080　2004　Part of collection (book)

On An Estimation method for Mechanical Properties of Polyimide by Molecular Dynamics Simulations

ZAKO Masaru, MATSUOKA Toshiki, OGATA Shigenobu, SHIBUTANI Yoji, KURASHIKI Tetsusei

Proceedings of the 1992 Annual Meeting of JSME/MMD　Vol. 2004　p. 353-354　2004

Study on development of an estimation system of mechanical characterization for textile composites

ZAKO Masaru, KURASHIKI Tetsusei, Hirosawa Satoru, TSUJIKAMI Tetuya

Proceedings of the 1992 Annual Meeting of JSME/MMD　Vol. 2004　p. 333-334　2004

On a Computational Procedure of Damage Development of a Woven Fabric Composites with Spread Tow

KURASHIKI Tetsusei, ZAKO Masaru, HIROSAWA Satoru, IMURA Makoto

Proceedings of the 1992 Annual Meeting of JSME/MMD　Vol. 2004　p. 335-336　2004

Multi-Scale Heat Transfer Analysis by Mesh Superposition Method

ZAKO Masaru, KURASHIKI Tetsusei, KUBO Futoshi

The proceedings of the JSME annual meeting　Vol. 2004　p. 329-330　2004

On a Mechanical Characterization of a Woven Fabric Composites with Spread Tow

KURASHIKI Tetsusei, ZAKO Masaru, HIROSAWA Satoru, IMURA Makoto

The proceedings of the JSME annual meeting　Vol. 2004　p. 345-346　2004

拡散・火災・爆発災害を考慮した化学プラントの災害シミュレーション手法の開発

座古勝, 倉敷哲生

科学技術振興費 大都市大震災軽減化特別プロジェクト 平成14年度成果報告書　2003/05　Research paper (bulletin of university, research institution)

貯蔵物の流出・拡散を考慮した化学プラントの安全性評価手法

倉敷哲生, 座古勝

日本学術会議 JCOSSAR2000　2000/04　Research paper (scientific journal)

Risk Analysis of Chemical Plants based on Disaster Simulation Considering for Outflow and Diffusion of Gas

KURASHIKI Tetsusei, ZAKO Masaru

Proceedings of the 1992 Annual Meeting of JSME/MMD　Vol. 2000　p. 373-374　2000

Approach for Composite Material Mechanics Chap.10 Strength Criteria for Composite Material

Masaru Zako, Tetsusei Kurashiki

Vol. 23　No. 4　p. 144-150　1997/04

Disaster Simulation for Chemical Plants -- Effect of Explosion Pressure on Pipe Collapse --

Masaru Zako, Tetsusei Kurashiki

1995/11　Research paper (scientific journal)