-
Application of equivalent distributed stress concept and modified cohesive zone model in elastic–plastic fracture mechanics analysis of surface cracks
Zwe Letyar Htut, Naoki Osawa, Satoyuki Tanaka, Masahiro Toyosada
Engineering Fracture Mechanics Vol. 315 p. 110813-110813 2025年2月 研究論文(学術雑誌)
出版者・発行元:Elsevier BV
-
Study on the estimation method for the mean stress effect on the fatigue strength of welded joints with various failure modes and joint types
Yukihide Yoshihara, Naoki Osawa, Hidekazu Murakawa, Peiyuan Dai
Welding in the World 2024年9月11日 研究論文(学術雑誌)
出版者・発行元:Springer Science and Business Media LLC
-
Efficient technique for evaluation of three-dimensional elastic–plastic fracture mechanics parameters based on equivalent distributed stress concept
Zwe Letyar Htut, Naoki Osawa, Satoyuki Tanaka, Masahiro Toyosada
Theoretical and Applied Fracture Mechanics Vol. 131 p. 104357-104357 2024年6月 研究論文(学術雑誌)
出版者・発行元:Elsevier BV
-
A digital twin for ship structures—R&D project in Japan
Masahiko Fujikubo, Tetsuo Okada, Hideaki Murayama, Hidetaka Houtani, Naoki Osawa, Kazuhiro Iijima, Kunihiro Hamada, Kimihiro Toh, Masayoshi Oka, Shinichi Hirakawa, Kenichi Shibata, Tetsuro Ashida, Toshiro Arima, Yoshiteru Tanaka, Akira Tatsumi, Takaaki Takeuchi, Taiga Mitsuyuki, Kohei Mikami, Makito Kobayashi, Yusuke Komoriyama, Chong Ma, Xi Chen, Hiroshi Ochi, Rei Miratsu
Data-Centric Engineering Vol. 5 2024年3月27日 研究論文(学術雑誌)
出版者・発行元:Cambridge University Press (CUP)
-
Verification of the fatigue life extension and practicality of the LTT elongated bead welding method for boxing fillet joints.
Takuya Matsuzaki, Ninshu Ma, Kazuo Hiraoka, Hidekazu Murakawa, Naoki Osawa, Takaaki Takeuchi, Koichi Okada, Chiaki Shiga, Hiroshi Yajima, Satoru Kano
Journal of the Japan Society of Naval Architects and Ocean Engineers Vol. 40 p. 133-143 2024年 研究論文(学術雑誌)
出版者・発行元:Japan Society of Naval Architects and Ocean Engineers
-
Local MIL-HDBK-5D equivalent stress based fatigue assessment of the gusset welded joint improved by Portable Pneumatic Needle-Peening treatment
Peiyuan Dai, Naoki Osawa, Sherif Rashed, Donghui Ma, Jun Okada, Masahito Honnami
International Journal of Fatigue Vol. 177 p. 107913-107913 2023年12月 研究論文(学術雑誌)
出版者・発行元:Elsevier BV
-
Fatigue assessment of ship structures based on equivalent wave probability (EWP) concept (1st report): Proposal of EWP concept and its verification by 8600TEU container ship's onboard hull monitoring
Takaaki Takeuchi, Naoki Osawa, Akira Tatsumi, Takumi Inoue, Shinichi Hirakawa, Noriaki Seki, Tomomi Yoshida, Rei Miratsu, Shingo Ikeda
Marine Structures Vol. 91 p. 103476-103476 2023年9月 研究論文(学術雑誌)
出版者・発行元:Elsevier BV
-
Study on the relationship between the root welding residual stress and the root-failure fatigue strength of Plug Welded specimens
Yukihide Yoshihara, Naoki Osawa, Hidekazu Murakawa, Taiyou Kagase
Welding International Vol. 37 No. 6 p. 352-364 2023年5月26日 研究論文(学術雑誌)
出版者・発行元:Informa UK Limited
-
Numerical study on local residual stresses induced by high frequency mechanical impact post-weld treatment using the optimized displacement-controlled simulation method
Peiyuan Dai, Phyo Myat Kyaw, Naoki Osawa, Sherif Rashed, Donghui Ma, Jun Okada, Masahito Honnami
Journal of Manufacturing Processes Vol. 92 p. 262-271 2023年4月 研究論文(学術雑誌)
出版者・発行元:Elsevier BV
-
栓溶接試験片における溶接ルート部残留応力とルート破壊疲労強度の関係に関する一考察
吉原 幸秀, 大沢 直樹, 村川 英一, 加賀瀬 太陽
溶接学会論文集 Vol. 40 No. 4 p. 238-248 2023年2月 研究論文(学術雑誌)
出版者・発行元:
-
Influence coefficient based fracture parameter modification factor in a cracked T-butt welded joint
Phyo Myat Kyaw, Naoki Osawa, Satoyuki Tanaka, Ramy Gadallah
Theoretical and Applied Fracture Mechanics Vol. 123 p. 103678-103678 2023年2月 研究論文(学術雑誌)
出版者・発行元:Elsevier BV
-
16Cr8Ni LTT 溶接伸長ビード補修補強法による疲労寿命延伸
大沢 直樹, 平岡 和雄, 麻寧緒, 村川 英一, 武内 崇晃, 岡田 公一, 松﨑 拓也, 志賀 千晃, 矢島 浩
溶接学会全国大会講演概要 Vol. 2023s p. 172-173 2023年
出版者・発行元:一般社団法人 溶接学会
-
継手形状・破壊形態によらない溶接疲労平均応力影響評価法に関する一考察
吉原 幸秀, 大沢 直樹, 村川 英一, Peiyuan Dai
日本船舶海洋工学会論文集 Vol. 36 p. 69-79 2022年12月 研究論文(学術雑誌)
出版者・発行元:
-
Fracture mechanics investigation of crack coalescence in a steel tubular T-joint specimen
Satoyuki Tanaka, Thin Thin Htut, Kengo Maeda, Kazuhisa Yagi, Naoki Osawa
Engineering Failure Analysis Vol. 139 2022年9月 研究論文(学術雑誌)
-
Numerical Study on Weld Magnification Method for a Semi-Circular Surface Crack Under an Arbitrary Stress Distribution
Phyo Myat Kyaw, Naoki Osawa, Satoyuki Tanaka, Ramy Gadallah
Proceedings of the 41st International Conference on Ocean, Offshore & Arctic Engineering Vol. 2 2022年6月5日 研究論文(国際会議プロシーディングス)
出版者・発行元:
-
Equivalent Distributed Stress Analysis of a Semi-Circular Surface Crack
Zwe Letyar Htut, Naoki Osawa, Satoyuki Tanaka, Phyo Myat Kyaw
Proceedings of the 32nd International Ocean and Polar Engineering Conference, Shanghai, China, June 2022 2022年6月 研究論文(国際会議プロシーディングス)
-
Proposal on a Practical Numerical Simulation Technique of HFMI Treatment for Welded Joints
Peiyuan Dai, Phyo Myat Kyaw, Donghui Ma, Jun Okada, Masahito Honnami, Sherif Rashed, Naoki Osawa
Proceedings of the 32nd International Ocean and Polar Engineering Conference, Shanghai, China, June 2022 2022年6月 研究論文(国際会議プロシーディングス)
-
船体腐食モデルのBayes推定に関する一考察 : IACS腐食モデルパラメタ決定のためのMCMCモデリング
森垣堅登, 大沢直樹, 武内崇晃
日本船舶海洋工学会講演会論文集 Vol. 34 p. 237-240 2022年5月
-
モデル化誤差データ同化による等価波浪頻度分布に基づく疲労被害度推定手法の検討
武内崇晃, 井上拓海, 大沢直樹
日本船舶海洋工学会講演会論文集 Vol. 34 p. 229-235 2022年5月
-
実船海水バラスト環境における無塗装鋼材のEIS腐食モニタリング
林原 仁志, 石渡 隼也, 井上 朝哉, 高田 篤志, 大沢 直樹, 小島 隆志
材料と環境2022講演論文集 Vol. - 2022年 研究論文(学術雑誌)
-
海水バラストタンク乾湿交番環境における鋼材腐食速度の過渡変化 評価
林原仁志, 石渡隼也, 井上朝哉, 高田篤志, 大沢直樹, 小島隆志
日本船舶海洋工学会講演論文集 Vol. 33 p. 299-300 2021年11月
-
等価波浪頻度分布に基づく非計測箇所の疲労被害度推定手法の検討
井上拓海, 武内崇晃, 大沢直樹
日本船舶海洋工学会講演会論文集 Vol. 33 p. 293-298 2021年11月
-
Impact of ship operations aided by voyage optimization on a ship’s fatigue assessment
Xiao Lang, Helong Wang, Wengang Mao, Naoki Osawa
Journal of Marine Science and Technology (Japan) Vol. 26 No. 3 p. 750-771 2021年9月 研究論文(学術雑誌)
-
Development of die-less single-tool multi-point plate forming technology for 3D curved shape
Song Wu, Ninshu Ma, Sherif Rashed, Naoki Osawa
International Journal of Advanced Manufacturing Technology 2021年9月 研究論文(学術雑誌)
出版者・発行元:Spring
-
Numerical study on the effect of residual stresses on stress intensity factor and fatigue life for a surface-cracked T-butt welded joint using numerical influence function method
Phyo Myat Kyaw, Naoki Osawa, Satoyuki Tanaka, Ramy Gadallah
Welding in the World 2021年8月21日 研究論文(学術雑誌)
出版者・発行元:Springer Science and Business Media LLC
-
A crack propagation simulation for a steel CHS T-joint employing an advanced shell-solid finite element modeling
S. Tanaka, K. Maeda, H. Takahashi, H. Okada, K. Yagi, N. Osawa
Journal of Marine Science and Technology Vol. 27 No. 1 2021年6月25日 研究論文(学術雑誌)
出版者・発行元:Springer Science and Business Media LLC
-
Object detectionを応用した溶接ビード外観検査の自動化に関する研究
鈴木豊, 河元泰裕, 郷卓紘, 四塚卓之, 安永明弘, 山田智章, 宮島秀規, 大沢直樹
日本船舶海洋工学会講演会論文集 Vol. 32 p. 423-426 2021年5月
-
Control of Car Decks Welding Deformation in RO-RO Ships
Junichi Toyoshima, Kiyoharu Hayashi, Mikikazu Murakami, Masanori Sano, Shogo Imasaki, Yasuo Katayama, Hidekazu Murakawa, Naoki Osawa, Sherif Rashed
Lecture Notes in Civil Engineering Vol. 65 LNCE p. 273-286 2021年 研究論文(国際会議プロシーディングス)
-
栓溶接継手の溶接ルート部における残留応力の解析精度に関する検討
吉原 幸秀, 大沢 直樹
溶接学会全国大会講演概要 Vol. 2021 p. 124-125 2021年
出版者・発行元:一般社団法人 溶接学会
-
Fatigue life prediction for 9%Ni steel butt welded joints
Toru Shiratsuchi, Naoki Osawa
International Journal of Fatigue Vol. 142 p. 105925-105925 2021年1月 研究論文(学術雑誌)
出版者・発行元:Elsevier BV
-
Study on Fatigue Strength of Welded Joints Subject to Intermittently Whipping Superimposed Wave Load
Naoki Osawa, Luis De Gracia, Kazuhiro Iijima, Norio Yamamoto, Kyosuke Matsumoto
Lecture Notes in Civil Engineering p. 454-472 2021年 論文集(書籍)内論文
出版者・発行元:Springer Singapore
-
溶接止端半径の異なるT字円筒継手に生じた疲労破面の力学的評価に関する研究
前田 研吾, 田中 智行, 高橋 大樹, 八木 一桐, 大沢 直樹
日本船舶海洋工学会論文集 Vol. 32 No. 32 p. 141-152 2020年12月 研究論文(学術雑誌)
出版者・発行元:日本船舶海洋工学会
-
Study on the stability of compressive residual stress induced by high-frequency mechanical impact under cyclic loadings with spike loads
Hector Ruiz, Naoki Osawa, Sherif Rashed
Welding in the World Vol. 64 No. 11 p. 1855-1865 2020年11月 研究論文(学術雑誌)
出版者・発行元:Springer Science and Business Media LLC
-
The thickness effect of hot spot S-N curves for welded aluminum joints
Toru Shiratsuchi, Naruyoshi Izumi, Tatsuya Imai, Satoru Nishimoto, Yuta Hasegawa, Naoki Osawa
Welding in the World Vol. 64 No. 9 p. 1521-1534 2020年9月 研究論文(学術雑誌)
出版者・発行元:Springer Science and Business Media LLC
-
Accurate evaluation of fracture parameters for a surface-cracked tubular T-joint taking welding residual stress into account
Ramy Gadallah, Seiichiro Tsutsumi, Satoyuki Tanaka, Naoki Osawa
Marine Structures Vol. 71 p. 102733-102733 2020年5月 研究論文(学術雑誌)
出版者・発行元:Elsevier BV
-
Investigation of thickness and bead profile effects on fatigue strength of welded joints based on relative stress gradient
Toru Shiratsuchi, Naoki Osawa
International Journal of Fatigue Vol. 134 p. 105520-105520 2020年5月 研究論文(学術雑誌)
出版者・発行元:Elsevier BV
-
等価波浪頻度分布のベイズ推定による疲労被害度推定手法に関する一考察
大沢直樹, 満行泰河, 辰巳晃, 柚井智洋, 田丸人意, 岡正義
日本船舶海洋工学会講演会論文集 No. 30 2020年5月 研究論文(学術雑誌)
-
遭遇短期海象における船体縦曲げ荷重のベイズ推論
辰巳晃, 園田悟大, 満行泰河, 柚井智洋, 岡正義, 大沢直樹
日本船舶海洋工学会講演会論文集 No. 30 2020年5月 研究論文(学術雑誌)
-
Accurate and efficient method for analyzing mixed-mode SIFs for inclined surface cracks in semi-infinite bodies by using numerical influence function method
Kyaw Phyo Myat, Naoki Osawa, Ramy Gadallah, Satoyuki Tanaka
Theoretical and Applied Fracture Mechanics Vol. 106 p. 102471-102471 2020年4月 研究論文(学術雑誌)
出版者・発行元:Elsevier BV
-
Comparative study on stress intensity factors for surface cracks in welded joint and flat plate by using the influence function method
Phyo Myat Kyaw, Naoki Osawa, Ramy Gadallah, Satoyuki Tanaka
Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE Vol. 2 2020年 研究論文(国際会議プロシーディングス)
出版者・発行元:American Society of Mechanical Engineers (ASME)
-
A study on the difference in wave statistics based on storm model for the ship structural assessment
Luis de Gracia, Helong Wang, Wengang Mao, Naoki Osawa
Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE Vol. 2 2020年 研究論文(国際会議プロシーディングス)
出版者・発行元:American Society of Mechanical Engineers (ASME)
-
低変態温度溶接材料を用いた伸長ビード溶接による疲労寿命延伸効果に関する一考察
松崎 拓也, 矢島 浩, 村川 英一, 麻 寧緒, 堤 成一郎, 平岡 和雄, 大沢 直樹, 岡田 公一, 谷野 忠和, 志賀 千晃
圧力技術 Vol. 58 No. 1 p. 22-38 2020年
出版者・発行元:一般社団法人 日本高圧力技術協会
-
一般逆行列を用いた等価分布応力決定法に関する研究(その1)-中央貫通き裂の影響関数を用いた二次元端部き裂の解析-
豊貞 雅宏, 田中 和輝, 松本 恭典, 田中 智行, 大沢 直樹
日本船舶海洋工学会論文集 Vol. 31 No. 0 p. 213-228 2020年 研究論文(学術雑誌)
出版者・発行元:
-
空間共分散構造を考慮した塗膜下腐食のセルオートマトン解析
塩谷 和彦, 大沢 直樹
日本船舶海洋工学会論文集 Vol. 31 No. 0 p. 135-144 2020年 研究論文(学術雑誌)
出版者・発行元:公益社団法人 日本船舶海洋工学会
-
Comparison of two statistical wave models for fatigue and fracture analysis of ship structures
Luis De Gracia, Helong Wang, Wengang Mao, Naoki Osawa, Igor Rychlik, Gaute Storhaug
Ocean Engineering Vol. 187 p. 106161-106161 2019年9月 研究論文(学術雑誌)
出版者・発行元:Elsevier BV
-
A practical analysis of residual stresses induced by high-frequency mechanical impact post-weld treatment
Hector Ruiz, Naoki Osawa, Sherif Rashed
Welding in the World Vol. 63 No. 5 p. 1255-1263 2019年9月 研究論文(学術雑誌)
出版者・発行元:Springer Science and Business Media LLC
-
Influence of preheating flame composition on oxy-hydrogen gas cutting efficiency
Cesar Pinzon, Naoki Osawa, Yuichi Ikegami
Proceedings of the International Offshore and Polar Engineering Conference Vol. 4 p. 3943-3948 2019年 研究論文(国際会議プロシーディングス)
出版者・発行元:International Society of Offshore and Polar Engineers
-
A study on welding distortion mitigation by gas heating using a linearized inherent strain method
Hector Ruiz, Naoki Osawa, Sherif Rashed
Proceedings of the International Offshore and Polar Engineering Conference Vol. 4 p. 3955-3959 2019年 研究論文(国際会議プロシーディングス)
出版者・発行元:International Society of Offshore and Polar Engineers
-
Numerical investigation on the influence of tensile overload on fatigue life using the interaction integral method
Ramy Gadallah, Seiichiro Tsutsumi, Naoki Osawa
土木学会論文集A2(応用力学) Vol. 74 No. 2 p. I_137-I_146 2019年1月 研究論文(学術雑誌)
-
セルオートマトンによる塗膜下腐食シミュレーションパラメタに及ぼす無機ジンクプライマーの影響
塩谷 和彦, 大沢 直樹, Abdul Halim, Azhan Bin, 中村 直人
日本船舶海洋工学会論文集 Vol. 29 No. 0 p. 57-64 2019年 研究論文(学術雑誌)
出版者・発行元:
-
Study on the Influence of the Preheating Flame Characteristics and the Oxy-fuel Gas Cutting Performance
Cesar Pinzon, Naoki Osawa, Yuichi Ikegami
Journal of the Japan Society of Naval Architects and Ocean Engineers Vol. 29 No. 0 p. 135-146 2019年 研究論文(学術雑誌)
出版者・発行元:Japan Society of Naval Architects and Ocean Engineers
-
A Study on the Fatigue Damage Estimation with the consideration of Wave-induced Vibrations
Luis Carlos De Gracia, Naoki Osawa, Kazuhiro Iijima, Norio Yamamoto, Hector Ruiz
日本船舶海洋工学会秋季講演会 2018年11月
-
Critical investigation on the influence of welding heat input and welding residual stress on stress intensity factor and fatigue crack propagation
Ramy Gadallaha, Naoki Osawa, Satoyuki Tanaka, Hiroshima Univ, Seiichiro Tsutsumi (Joining, Welding Research Inst, Osaka Universit
Engineering Failure Analysis Vol. 89 p. 200-221 2018年7月 研究論文(学術雑誌)
-
Stability of Compressive Residual Stress Introduced by HFMI Technique
Hector Olmedo Ruiz Valdes, Naoki Osawa, Hidekazu Murakawa, Sherif Rashed
Volume 4: Materials Technology 2018年6月17日 研究論文(国際会議プロシーディングス)
出版者・発行元:American Society of Mechanical Engineers
-
A Study on the Stochastic Aspects of the Whipping Vibrations in a Container Ship
Luis De Gracia, Naoki Osawa, Kazuhiro Iijima, Toichi Fukasawa, Hitoi Tamaru
2018年6月17日 研究論文(国際会議プロシーディングス)
出版者・発行元:
-
2018S-GS5-4 低変態温度溶接材料による疲労寿命延伸効果と溶接金属の破壊靭性に関する一考察
岡田 公一, 大沢 直樹, 麻 寧緒, 堤 成一郎, 村川 英一, 平岡 和雄, 松崎 拓也, 志賀 千晃, 矢島 浩
日本船舶海洋工学会講演会論文集 Vol. 26 p. 245-249 2018年5月21日
出版者・発行元:公益社団法人 日本船舶海洋工学会
-
A novel approach to evaluate mixed-mode SIFs for a throughthickness crack in a welding residual stress field using an ffective welding simulation method
Ramy Gadallaha, Naoki Osawa, Satoyuki Tanaka, Hiroshima Univ, Seiichiro Tsutsumi (Joining, Welding Research Inst, Osaka Universit
Engineering Fracture Mechanics 2018年4月 研究論文(学術雑誌)
-
ドリルパイプ破断事例の破壊メカニズムに関する技術的考察
井上朝哉, 和田一育, 大沢直樹, 藤久保昌彦, 鈴木博善, Ciro Santus
日本船舶海洋工学会論文集 Vol. 26 p. 183-193 2018年3月 研究論文(学術雑誌)
-
A Comparative Study on Fatigue Damage using a Wave Load Sequence Model
Luis De Gracia, Naoki Osawa, Hitoi Tamaru, Toichi Fukasawa
KnE Engineering Vol. 3 No. 1 p. 160-160 2018年2月11日 研究論文(学術雑誌)
出版者・発行元:Knowledge E
-
Study on hot spot S-N curve for welded aluminum joints with various plate thicknesses
Toru Shiratsuchi, Naruyoshi Izumi, Tatsuya Imai, Satoru Nishimoto, Yuta Hasegawa, Naoki Osawa
Proceedings of the International Offshore and Polar Engineering Conference Vol. 2018- p. 64-70 2018年 研究論文(国際会議プロシーディングス)
出版者・発行元:International Society of Offshore and Polar Engineers
-
A Study on the Stochastic Characteristics of Wave Load Sequences including Whipping Vibrations in a Container Ship
Luis DE GRACIA, Naoki OSAWA, Kazuhiro IIJIMA, Toichi FUKASAWA
2017年9月 研究論文(国際会議プロシーディングス)
-
Elongated bead weld method for improvement of fatigue properties in welded joints of ship hull structures using low transformation temperature welding materials
C. Shiga, H. Murakawa, K. Hiraoka, N. Osawa, H. Yajima, T. Tanino, S. Tsutsumi, T. Fukui, H. Sawato, K. Kamita, T. Matsuzaki, T. Sugimura, T. Asoda, K. Hirota
WELDING IN THE WORLD Vol. 61 No. 4 p. 769-788 2017年6月 研究論文(学術雑誌)
-
セルオートマトンによる塗膜下腐食シミュレーション手法に関する研究(第2報:バラストタンク内エッジ腐食の解析)
大沢 直樹, 塩谷 和彦, スチー, 高田 篤志, 竹野 成流, 片山 志乃, 織田拓哉
日本船舶海洋工学会論文集 Vol. 25 p. 123-131 2017年6月 研究論文(学術雑誌)
出版者・発行元:社団法人 日本船舶海洋工学会
-
Study on under-film corrosion simulation of free edges in water ballast tanks
Naoki Osawa, Seiru Takeno, Shino Katayama, Takuya Oda, Azhan Bin Abdul Halim, Kazuhiko Shiotani, JFE Steel, Atsushi Takada, National Maritime Research Inst
Progress in the Analysis and Design of Marine Structures Vol. 25 p. 123-131 2017年5月 研究論文(学術雑誌)
出版者・発行元:CRS Press
-
Evaluation of crack propagation behaviors in a T-shaped tubular joint employing tetrahedral FE modeling
Kazuhisa Yagia, Sanoyasu Shipbuilding, Satoyuki Tanak, oshima U, Takahiro Kawahara, Hiroshima Univ, Kanta Nihei, Kawasaki Technology, Hiroshi Okada (Tokyo, University of Science, NaokiOsawa
International Journal of Fatigue 2017年3月 研究論文(学術雑誌)
-
A study on the influence of weather routing on the preciseness of ship structure's fatigue assessment
Luis De Gracia, Hitoi Tamaru, Naoki Osawa, Toichi Fukasawa
Proceedings of the International Offshore and Polar Engineering Conference p. 957-963 2017年 研究論文(国際会議プロシーディングス)
出版者・発行元:Society of Petroleum Engineers
-
Evaluation of stress intensity factor for a surface cracked butt welded joint based on real welding residual stress
Ramy Gadallah, Naoki Osawa, Satoyuki Tanaka
Ocean Engineering 2017年1月 研究論文(学術雑誌)
-
Fundamental study on under-film corrosion simulation method based on cellular automaton
Naoki Osawa, Yasuhide Kanou, Yokohama National Uni, Yasumi Kawamura, Yokohama National Uni, Atsushi Takada, National Maritime Research Inst, Kazuhiko Shiotani, JFE Steel, Seiru Takeno, Shino Katayama
Proc. 13th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS'2016) 2016年9月 研究論文(学術雑誌)
-
Prediction of Distortion Produced in Welded Structures during Straightening Process Using the Inherent Strain Method
Hector Olmedo Ruiz Valdes, Naoki Osawa, Hidekazu Murakawa (Joini, Welding Research Inst, Osaka Univ, Sherif Rashed, CAE La
Proc. 35th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2016) 2016年6月 研究論文(学術雑誌)
-
Uncertainties of Crack Propagation Analysis in Ship Structures
Wengang Mao, Chalmers Univ, Jingxia Yue, C, almers Univ, Da Wu (Chalmers Univ, Luis De Gracia, Naoki Osawa
Proc. 35th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2016) 2016年6月 研究論文(学術雑誌)
-
Numerical Estimation on Stress Intensity Factors for Surface Cracks in a Welding Residual Stress Field
Ramy Gadallah, Naoki Osawa, Satoyuki Tanaka
Proc. 35th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2016) 2016年6月 研究論文(学術雑誌)
-
Influence of Different Wave Load Sequence Models on Fatigue Life Prediction of Ship Structures Based on Fracture Mechanics Approach
Luis De Gracia, Naoki Osawa, Wengang Mao, C, almers Univ, Daichi Ichihashi
Proc. 35th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2016) 2016年6月 研究論文(学術雑誌)
-
Development of Under-Film Corrosion Simulation Method based on Cellular Automaton
Naoki Osawa, Yasuhide Kanou, Yokohama National Uni, Yasumi Kawamura, Yokohama National Uni, Atsushi Takada, National Maritime Research Inst, Kazuhiko Shiotani, JFE Steel, Seiru Takeno, Shino Katayama, Kristov Ivan William
Proc. 35th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2016) 2016年6月 研究論文(学術雑誌)
-
嵐モデルに基づいた疲労センサによる船体構造の疲労寿命推定手法の高度化(第2報)頻度データを活用した推定手法
小林朋平, 孝岡祐吉, 仁瓶寛太, 川重テクノサービス, 大沢直樹, De Gracia Luis, 市橋大地
日本船舶海洋工学会論文集 No. 23 p. 153-167 2016年6月 研究論文(学術雑誌)
出版者・発行元:日本船舶海洋工学会
-
嵐モデルに基づいた疲労センサによる船体構造の疲労寿命推定手法の高度化
小林朋平, 孝岡祐吉, 仁瓶寛太, 川重テクノサービス, 大沢直樹, De Gracia Luis, 市橋大地
日本船舶海洋工学会論文集 No. 23 p. 153-167 2016年6月 研究論文(学術雑誌)
出版者・発行元:日本船舶海洋工学会
-
セルオートマトンによる塗膜下腐食シミュレーション手法に関する研究(第1報)スクライブ塗装鋼板の解析
大沢 直樹, 狩野 泰秀, 川村 恭己, 高田 篤志, 塩谷 和彦, スチール, 竹野 成流, 片山 志乃
日本船舶海洋工学会論文集 No. 23 p. 139-151 2016年6月 研究論文(学術雑誌)
出版者・発行元:日本船舶海洋工学会
-
曲げ振動疲労試験機を用いた高周波重畳波浪荷重を受ける溶接継手の疲労強度に関する研究
大沢直樹, 中村哲也, ジャパンマリンユナイテッド, 山本規雄, 澤村淳司
日本船舶海洋工学会論文集 Vol. 22 p. 175-185 2015年12月 研究論文(学術雑誌)
出版者・発行元:社団法人 日本船舶海洋工学会
-
Development of Advanced Fatigue Strength Improvement Method for Ship's Out-of-Plane Gusset Welded Joints Using Low Transformation Temperature Welding Material
Chiaki Shiga(Joining, Welding Research Inst, Osaka Univ, Kazuo Hiraoka(Joining, Welding Research Inst, Osaka Univ, Hiroshi Yajima, Nagasaki Inst, Applied Science, Tadakazu Tanino, agasaki Inst, Applied Science, Hidekazu Murakawa(Joinin, Welding Research Inst, Osaka Univ, Seiichiro Tsutumi(Joining, Welding Research Inst, Osaka Univ, Naoki Osawa
Proc. 25th Int. Offshore and Polar Engineering Conf (ISOPE2015). Vol. 2015-January p. 508-513 2015年6月 研究論文(学術雑誌)
-
Experimental Study on Fatigue Strenght of Ship's Welded Joint under Intermittently Hight Frequency Superimposed Loads Considering Actual Encountered Condition
Naoki Osawa, Tetsuya Nakamura, Marin, Norio Yamamoto, ClassNK, Junji Sawamura
Proc. 25th Int. Offshore and Polar Engineering Conf (ISOPE2015). 2015年6月 研究論文(学術雑誌)
-
Numerical Study on Heat Straightening Process for Welding Distortion of a Stiffened Panel Structure
Juan Blandon (Joining, Welding Research Inst, Osaka Univ, Naoki Osawa, Sano Masanori, Naikai Zosen, Sherif Rashed(CAE Lab, Hidekazu Murakawa (Joi, Welding Research Inst, Osaka Uni
Proc. 25th Int. Offshore and Polar Engineering Conf (ISOPE2015). 2015年6月 研究論文(学術雑誌)
-
Development of Fe(II) Fluorescent Indicator for Underfilm Corrosion Monitoring of Water Ballast Tank
Naoki Osawa, Atsushi Takada, National Maritime Research Inst, Takashi Kojima, National Maritime Research Inst, Sho Takano, Shino Katayama, Seiru Takeno
Proc. 25th Int. Offshore and Polar Engineering Conf (ISOPE2015). 2015年6月 研究論文(学術雑誌)
-
Characterization and Numerical Simulation of Corroded Surface of Coated Steel Plates in Water Ballast Tank
Yasumi Kawamura, Yokohama National Uni, Yasuhide Kanou, Yokohama National Univ, Naoki Osawa, Norio Yamamoto, ClassNK, Kazuhiko Shiotani, JFE Steel, Kazuyuki Kashima, Nippon Steel, Sumitomo Metal, Shinji Sakashita, Kobe Ste, Kenji Katoh, loyd's Register Japa, Sho Takano
Proc. 25th Int. Offshore and Polar Engineering Conf (ISOPE2015). 2015年6月 研究論文(学術雑誌)
-
Onboard Study on Deterioration of Coated Steel in Water Ballast Tank
Shinji Sakashita, Kobe Steel, Kazuhiko Shiotani, JFE Steel, Kazuyuki Kashima, Nippon Steel, Sumitomo Metal, Satoshi Murakoshi, Mitsui, O.S.K. Lines, Keita Fukunaga, YK Line, Tsutomu Baba, Chugoku Marine Paints, Akira Takai, Marine Coatin, Atsushi Takada, National, Maritime Research Inst, Naoki Osawa
Proc. 25th Int. Offshore and Polar Engineering Conf (ISOPE2015). 2015年6月 研究論文(学術雑誌)
-
エポキシ塗装鋼板塗膜下腐食モニタリングのための鉄2価イオン感応性蛍光プローブの開発
大沢直樹, 高田篤志, 小島隆志, 高野翔
日本船舶海洋工学会論文集 Vol. 21 p. 93-99 2015年5月 研究論文(学術雑誌)
出版者・発行元:The Japan Society of Naval Architects and Ocean Engineers
-
Numerical Study on Cyclic Crystalline Slip Deformation of Polycrystalline Metallic Material by Homogenization Method
Naoki Osawa, Noritaka Saito
Proc. 24th Int. Offshore and Polar Engineering Conf (ISOPE2014). 2014年6月 研究論文(学術雑誌)
-
Experimental Study on High Frequency Effect on Fatigue Strength of Welded Joints by Using Plate-Bending-Vibration Type Fatigue Testing Machines
Naoki Osawa, Tetsuya Nakamura, Marin, Norio Yamamoto, ClassNK, Junji Sawamura
Proc. 33rd International Conference on Ocean, Offshore and Arctic Engineering (OMAE2014) 2014年6月 研究論文(学術雑誌)
-
Study on the relationship between the heat transfer characteristics of preheating gas and cutting performance of oxyfuel gas cutting
Naoki Osawa, Junji Sawamura, Yuichi Ikegami, Airwater Inc, Kazue Yamaguchi
Welding International 2014年4月 研究論文(学術雑誌)
-
線状加熱に用いられる熱源の力学的特性
Blandon Juan, 佐野 仁則, 大沢 直樹, Rashed Sherif, 村川 英一
溶接学会全国大会講演概要 Vol. 2014 p. 314-315 2014年
出版者・発行元:一般社団法人 溶接学会
-
Experimental Study on High Frequency Effect on Fatigue by Using the New High Speed Fatigue Testing Machine
Naoki Osawa, Tetsuya Nakamura, Marin, Norio Yamamoto, ClassNK, Junji Sawamura
Proc. 12th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS2013) 2013年10月 研究論文(学術雑誌)
-
Analysis of Crack Retardation Effects and Crack Path in Ship Structure Members on Different Routes
Fredhi Agung Prasetyo, Wengang Mao(Chalmers University, Tomohei Kobayashi, Kawasaki Heavy Industirs, Naoki Osawa, Jonas W. Ringsberg, Chalmers University
Proc. 13th Int. Conf. on Fracture (ICF13) 2013年6月 研究論文(学術雑誌)
-
A comparison of two wave models and their influence on fatigue damage in ship structures
Wengang Mao(Chalmers University, Fredhi Agung Prasetyo, Jonas W. Ringsberg, Chalmers University, Naoki Osawa
Proc. 32nd International Conference on Ocean, Offshore and Arctic Engineering (OMAE2013) 2013年6月 研究論文(学術雑誌)
-
Development of a new fatigue testing machine for high frequency fatigue damage assessment
Naoki Osawa, Tetsuya Nakamura, Marin, Norio Yamamoto, ClassNK, Junji Sawamura
Proc. 32nd International Conference on Ocean, Offshore and Arctic Engineering (OMAE2013) 2013年6月 研究論文(学術雑誌)
-
酸素ガス切断における予熱ガス炎性状と切断性能の関係に関する研究
大沢直樹, 澤村淳司, 池上祐一, エアーウォーター, 山口和恵
溶接学会論文集 2013年3月 研究論文(学術雑誌)
-
Study of Heattransfer During Piercing Process of Oxyfuel Gas Cutting
Naoki Osawa, Junji Sawamura, Yuichi Ikegami, Naoya Okamoto
Welding in the World 2013年3月 研究論文(学術雑誌)
-
Study on Preciseness of Load History Generation based on Storm model for Fatigue Assessment of Ship Structure Members
Fredhi Agung Prasetyo, Naoki Osawa, Tomohei Kobayashi, Kawasaki Heavy Industries
Proc. 22th Int. Offshore and Polar Engineering Conf (ISOPE2012). 2012年7月 研究論文(学術雑誌)
-
Study on the Effect of Storm Duration Fluctuation on the Accuracy of Fatigue Assessment of Ship Structural Member
Fredhi Agung Prasetyo, Naoki Osawa, Junji Sawamura
Proc. 21th Int. Offshore and Polar Engineering Conf (ISOPE2011). 2011年6月 研究論文(学術雑誌)
-
Study on the preciseness of hot spot stress of web-stiffened cruciform welded joints derived from shell finite element analyses
Naoki Osawa, Norio Yamamoto(ClassNK, Tetsuji Fukuoka(Mitsui Shipbuilding, Engineering, Junji Sawamura, Hiroshi Nagai, Shingo Maeda
Marine Structures 2011年2月 研究論文(学術雑誌)
-
Study on the accuracy of Influence Factor Method when applied to surface cracks in a welded joint of a ship structure
Naoki Osawa, Junji Sawamura, Shota Okada, Kei Shigeta, Tomohide Tsuji
Proceedings of the International Offshore and Polar Engineering Conference p. 51-58 2011年 研究論文(国際会議プロシーディングス)
-
シェル有限要素解析で評価したウェブ補強十字継手ホットスポット応力の計算精度に関する研究
大沢直樹, 山本規雄, 福岡哲二, 澤村淳司, 長井洋, 前田晋吾
日本船舶海洋工学会論文集 2010年12月 研究論文(学術雑誌)
-
酸素ガス切断におけるピアシング予熱中の入熱に関する研究
大沢直樹, 澤村淳司, 池上祐一, エアーウォーター, 岡本尚也
溶接学会論文集 Vol. 28 p. 427-435 2010年12月 研究論文(学術雑誌)
-
船体構造中の溶接継手に影響係数法を適用する際の計算精度に関する研究
大沢直樹, 澤村淳司, 岡田翔太, 辻知英
日本船舶海洋工学会論文集 Vol. 12 p. 201-208 2010年12月 研究論文(学術雑誌)
出版者・発行元:The Japan Society of Naval Architects and Ocean Engineers
-
Numerical Modeling for Ship Maneuvering in Level Ice
Junji Sawamura, Hiroyuki Tsuchiya, Takashi Tachibana, Naoki Osawa
Proceedings of The 20th IAHR International Symposium On Ice 2010年7月 研究論文(国際会議プロシーディングス)
-
Numerical Investigation for the Bending Failure of Wedge-Shaped Floating Ice
Junji Sawamura, Takashi Tachibana, Hiroyuki Tsuchiya, Naoki Osawa
Proceedings of The 20th IAHR International Symposium On Ice 2010年7月 研究論文(国際会議プロシーディングス)
-
Development of a structural hot spot stress estimation technique based on shell fe analysis for ship structural details under the real load
Naoki Osawa, Norio Yamamoto, Tetsuji Fukuoka, Junji Sawamura, Hiroshi Nagai, Shingo Maeda
11th International Symposium on Practical Design of Ships and Other Floating Structures, PRADS 2010 Vol. 2 p. 1033-1043 2010年 研究論文(国際会議プロシーディングス)
-
フリーエッジ形状とエッジ膜厚保持率の関係の数値解析
澤村淳司, 大沢直樹, 菊澤遼平
日本船舶海洋工学会講演会論文集 2009年6月
-
Development of a simple estimation method for fatigue crack growth rate
Naoki Osawa, Junji Sawamura, Hiroshi Asai, Masaki Kuwahara
Proceedings of the International Offshore and Polar Engineering Conference p. 422-428 2009年 研究論文(国際会議プロシーディングス)
-
Comparative study on estimation techniques for local stress of web stiffened cruciform connections
Naoki Osawa, Junji Sawamura, Tsutomu Fujiwara, Hiroshi Nagai
Proceedings of the International Offshore and Polar Engineering Conference p. 240-245 2009年 研究論文(国際会議プロシーディングス)
-
An Application to Welded Joints of the Crack Inspection System by Using Magnetic Properties
Kiyoshi Hashimoto, Naoki Osawa, Junji Sawamura, Hiroshi Asai
Proc. 18th International Offshore and Polar Engineering Conference 2008年7月 研究論文(国際会議プロシーディングス)
-
GA-based Heat Input Estimation Technique for Simulation of Shell Forming by Line-Heating
Naoki Osawa, Kiyoshi Hashimoto, Junji Sawamura, Hironori Tanaka
Proc. 18th International Offshore and Polar Engineering Conference p. 285-290 2008年7月 研究論文(国際会議プロシーディングス)
-
Numerical Study on the Fatigue Crack Propagation Behavior in Flattened Martensite Dual Phase Steel
Naoki Osawa, Daiki Ueno, Ryo Shimoike, Kiyoshi Hashimoto, Kiyotaka Nakashima, Tetsuro Nose
Proc. 18th International Offshore and Polar Engineering Conference Vol. 6 p. 387-387 2008年7月 研究論文(国際会議プロシーディングス)
-
2008K-G7-2 目違いが実船体構造中の溶接継手の疲労強度に与える影響に関する一考察(一般講演(G7))
大沢 直樹, 澤村 淳司, 藤原 力
日本船舶海洋工学会講演会論文集 Vol. 7 p. 109-112 2008年
出版者・発行元:公益社団法人 日本船舶海洋工学会
-
扁平マルテンサイト二相鋼内の疲労き裂伝播挙動の数値シミュレーション
大沢直樹, 上野大輝, 下池亮, 橋本聖史, 中島清孝, 野瀬哲郎
日本船舶海洋工学会論文集 2007年12月 研究論文(学術雑誌)
-
Study on the Relationship between Shell Stress and Solid Stress in Fatigue Assessment of Ship Structure
Naoki Osawa, Kiyoshi Hashimoto, Junji Sawamura, Tohei Nakai, Shota Suzuki
Proc. 10th Symposium on Practical Design of Ships and Other Floating Structures Vol. 2 p. 1142-1149 2007年9月 研究論文(国際会議プロシーディングス)
-
Estimate Method of Hotspot Stress for Ship Structural Members Based on FE Analysis
Norio Yamamoto, Naoki Osawa, Koji Terai
Proc. 10th Symposium on Practical Design of Ships and Other Floating Structures 2007年9月 研究論文(国際会議プロシーディングス)
-
Study on the Alternatives to the Secondary Surface Preparation in Protective Coatings
Naoki Osawa, Koichiro Umemoto, Yukinori Nambu, Tatsuya Kuramoto
Proc. International Symposium on SHIPBUILDING TECHNOLOGY (ISST 2007) - Fabrication and Coatings - 2007年9月 研究論文(国際会議プロシーディングス)
-
Study on the relationship between shell stress and solid stress in the vicinities of ship's welded joints
Naoki Osawa, Kiyoshi Hashimoto, Junji Sawamura, Tohei Nakai, Shota Suzuki
Proc. 17th International Offshore and Polar Engineering Conference 2007年7月 研究論文(国際会議プロシーディングス)
-
Study on shell-solid coupling FE analysis for fatigue assessment of ship structure
Naoki Osawa, Kiyoshi Hashimoto, Junji Sawamura, Tohei Nakai, Shota Suzuki
Marine Structures Vol. 20 p. 143-163 2007年7月 研究論文(学術雑誌)
出版者・発行元:Elsevier
-
Development of Heat Input Estimation Technique for Simulation of Shell Forming by Line-Heating
Naoki Osawa, Kiyoshi Hashimoto, Junji Sawamura, Jun Kikuchi
Computer Modeling in Engineering & Sciences Vol. 20 No. 1 p. 43-53 2007年1月 研究論文(学術雑誌)
出版者・発行元:Tech Science Press
-
造船用鋼材の繰返し軟化特性とき裂伝播速度の関係に関する一考察
大沢直樹, 上野大輝, 下池亮, 橋本聖史, 稲見彰則
日本船舶海洋工学会論文集 No. 4 p. 257-267 2006年12月 研究論文(学術雑誌)
出版者・発行元:日本船舶海洋工学会
-
Numerical Estimation of Torsional Deformation of a Ship Longitudinal Frame Formed by Gas Heating
Naoki Osawa, Hajime Kaminaga, Motohisa Onoe, Hidekazu Murakawa, Kazuhiko Tani
Proc. 16th International Offshore and Polar Engineering Conference 2006年5月 研究論文(国際会議プロシーディングス)
-
Numerical evaluation of welded toe cracks for ship structures
Junji Sawamura, Naoki Osawa, Kiyoshi Hashimoto, Hiroshi Chousokabe, Tetsuji Toshimitsu
Proceedings of the International Offshore and Polar Engineering Conference p. 376-379 2006年 研究論文(国際会議プロシーディングス)
-
Research on development of a non-destructive crack inspection system by using magnetic properties
Kiyoshi Hashimoto, Naoki Osawa, Junji Sawamura, Hiroki Wada, Hideyuki Mori, Yoshiteru Tanaka
Proceedings of the International Offshore and Polar Engineering Conference p. 86-91 2006年 研究論文(国際会議プロシーディングス)
-
船体骨材捩り変形の熱弾塑性有限要素解析
大沢直樹, 神永肇, 三井造船, 尾上仁久, ユニバーサル造船, 村川英一, 谷和彦, 日, 浪越正至, 重機械マリンユナイテッド
日本造船学会論文集 2005年5月 研究論文(学術雑誌)
-
船体骨材フェイス繰返し円状加熱の熱サイクル推定
大沢直樹, 尾上仁久, ユニバーサル造船, 谷和彦, 日立造船, 浪越正至, 友重機械マリンユナイテッド, 神永肇(三井造船, 村川英一
日本造船学会論文集 2005年5月 研究論文(学術雑誌)
-
貫通き裂開閉口挙動の3次元数値解析
大野好和, 大沢直樹, 冨田康光, 橋本聖史
日本造船学会論文集, 195, pp. 253-262 2004年12月 研究論文(学術雑誌)
-
自動要素分割ソフトと非適合メッシングを使用した溶接継手部応力拡大係数の数値計算
大沢直樹, 冨田康光, 橋本聖史, 中田賢治
溶接構造シンポジウム2004講演論文集 pp. 231-234 2004年11月
-
Study on Fatigue Design Loads for Ships based on Crack Growth Analysis
Yasumitsu Tomita, Kiyoshi Hashimoto, Naoki Osawa, YeHong Wang
Journal of ASTM International 2004年10月 研究論文(学術雑誌)
-
Improvement of the Accuracy of Heat Input Estimation during Line Heating Process by using Regularization Method
Naoki Osawa, Yasumitsu Tomita, Kiyoshi Hashimoto, Jun Kikuchi
Proc. 9th Symposium on Practical Design of Ships and Other Floating Structures p. 974-981 2004年9月 研究論文(国際会議プロシーディングス)
-
Development of Heat Input Estimation Technique for Line-Heating Process based on Inverse Heat Conduction Analysis
Naoki Osawa, Yasumitsu Tomita, Kiyoshi Hashimoto, Kiyoshi Matsuoka(Mitsubishi Heavy, Industries, Ltd, Jun Kikuchi
Proc. 14th International Offshore and Polar Engineering Conference 2004年5月 研究論文(国際会議プロシーディングス)
-
き裂伝播解析に基づく疲労設計法に関する研究(その3)
寺井幸司, 冨田康光, 橋本聖史, 大沢直樹, 王業宏
日本造船学会論文集 No. 193 p. 49-56 2003年12月 研究論文(学術雑誌)
出版者・発行元:日本造船学会
-
Study of fatigue crack nucleation process by crystalline FE analysis
Naoki Osawa, Yasumitsu Tomita, Kiyoshi Hashimoto
Journal of Marine Schience and Technology 2003年12月 研究論文(学術雑誌)
出版者・発行元:Springer
-
Three-dimensional Numerical Investigation on Thickness-through Fatigue Crack Closure
Tetsuji Miyashita, Yasumitsu Tomita, Naoki Osawa, Kiyoshi Hashimoto, Yoshikazu Ohno
Proc. 13th International Offshore and Polar Engineering Conference 2003年5月 研究論文(国際会議プロシーディングス)
-
A New Approach to Fatigue Strength Evaluation of Ship Hull (2nd Report)
YeHong Wang, Yasumitsu Tomita, Kiyoshi Hashimoto, Naoki Osawa, Koji Terai
Proc. 13th International Offshore and Polar Engineering Conference 2003年5月 研究論文(国際会議プロシーディングス)
-
き裂伝播解析に基く疲労設計法に関する研究(その2)
寺井幸司, 冨田康光, 橋本聖史, 大沢直樹ほか
日本造船学会論文集 No. 192 p. 555-562 2002年12月 研究論文(学術雑誌)
出版者・発行元:日本造船学会
-
熱伝導逆解析に基く線状加熱時入熱量推定法の正則化処理による高精度化
冨田康光, 大沢直樹, 橋本聖史ほか
日本造船学会論文集 Vol. 192 p. 519-529 2002年12月 研究論文(学術雑誌)
-
溶接構造部材の疲労強度解析のための初期き裂設定法に関する研究
王業宏, 冨田康光, 橋本聖史, 大沢直樹ほか
日本造船学会論文集 No. 192 p. 545-553 2002年12月 研究論文(学術雑誌)
出版者・発行元:日本造船学会
-
線状加熱における衝突噴流火炎場解析のための燃焼モデルおよび乱流モデルに関する研究
澤村淳司, 冨田康光, 大沢直樹, 橋本聖史
日本造船学会論文集 No. 192 p. 531-543 2002年12月 研究論文(学術雑誌)
出版者・発行元:日本造船学会
-
熱伝導逆解析に基く撓鉄作業時入熱量推定法に関する研究
冨田康光, 大沢直樹, 橋本聖史
溶接構造シンポジウム2002講演論文集 2002年11月
-
A Study on Heat Transfer to Steel Plate from Combustion Flux in Line Heating
Yoshihiro Deguchi(Mitsubishi Heavy Industries, Lt, Tsuyotoshi Yamaura(Mitsubishi Heavy, Industries, Ltd, Yasumitsu Tomita, Naoki Osawa, Kiyoshi Hashimoto, Junji Sawamura
Proc. 10th International Symposium on Flow Visualization 2002年8月 研究論文(国際会議プロシーディングス)
-
A New Approach to Fatigue Strength Evaluation of Ship Hull
Y. H. Wang, K. Terai, Y. Tomita, K. Hashimoto, N. Osawa
Proc. 12nd International Offshore and Polar Engineering Conference 2002年5月 研究論文(国際会議プロシーディングス)
-
熱伝導逆解析による線状加熱時の入熱量の推定法に関する研究
松岡潔, 冨田康光, 大沢直樹, 橋本聖史ほか
関西造船協会論文集,237,pp.255-261 2002年3月 研究論文(学術雑誌)
-
Study on Mathematical Model for Turbulent Combustion in the Impinging Jet Flame during Line Heating Process
Junji Sawamura, Yasumitsu Tomita, Naoki Osawa, Kiyoshi Hashimoto
Proceedings of the International Offshore and Polar Engineering Conference Vol. 12 p. 247-252 2002年 研究論文(国際会議プロシーディングス)
-
線状加熱における燃焼流場から鋼板への熱移動に関する研究(その3)
冨田康光, 大沢直樹, 橋本聖史, 新海信隆, ビューローべりタス, 澤村淳司, 杉山圭一, 坪内大泉, 出口祥啓, 山浦剛俊
日本造船学会論文集,190,pp. 479-488 Vol. 190 p. 479-488 2001年12月 研究論文(学術雑誌)
-
線状加熱における衝突噴流火炎場の燃焼解析法に関する研究
澤村淳司, 冨田康光, 大沢直樹, 橋本聖史ほか
日本造船学会論文集,190,pp.489-497 No. 190 p. 489-497 2001年12月 研究論文(学術雑誌)
出版者・発行元:日本造船学会
-
結晶弾塑性有限要素法を用いた疲労き裂形成機構に関する研究(その4)
大沢直樹, 冨田康光, 橋本聖史ほか
日本造船学会論文集,190,pp.539-551 No. 190 p. 539-551 2001年12月 研究論文(学術雑誌)
出版者・発行元:日本造船学会
-
き裂伝播解析に基く疲労設計法に関する研究
寺井幸司, 冨田康光, 橋本聖史, 大沢直樹ほか
日本造船学会論文集,190,pp.531-537 No. 190 p. 531-537 2001年12月 研究論文(学術雑誌)
出版者・発行元:日本造船学会
-
Study on Heat Transfer between Gas Flame and Plate during Line-heating Process
Yasumitsu Tomita, Naoki Osawa, Kiyoshi Hashimoto, Nobutaka Shinkai, Junji Sawamura
Proc. 8th Symposium on Practical Design of Ships and Other Floating Structures, pp. 389-396 2001年9月 研究論文(国際会議プロシーディングス)
-
Fatigue Design Method of Ship Structural Members Based on Fatigue Crack Growth Analysis
K. Terai, Y. Tomita, K. Hashimoto, N. Osawa
Proc. 11th International Offshore and Polar Engineering Conference, IV, pp. 589-594 2001年6月 研究論文(国際会議プロシーディングス)
-
Experimental Study on Thermo-Flow Field during Gas Flame Heating
Nobutaka Shinkai, Yasumitsu Tomita, Naoki Osawa, Kiyoshi Hashimoto, Junji Sawamura
Proc. 11th International Offshore and Polar Engineering Conference, IV, pp. 595-601 2001年5月 研究論文(国際会議プロシーディングス)
-
A Study on Fatigue Crack Growth under Considering Coalescence of Multiple Surface Cracks
YeHong Wang, Yasumitsu Tomita, Kiyoshi Hashimoto, Naoki Osawa, Koji Terai
Proc. 15th Asian Technical Exchange and Advisory Meeting on Marine Structures, pp. 319-328 Vol. 319 2001年5月
-
線状加熱における燃焼流場から鋼板への熱移動に関する研究(その2)
冨田康光, 大沢直樹, 橋本聖史, 新海信隆, 澤村淳司, 坪内大泉, 出口祥啓
日本造船学会論文集, 188, pp. 579-587 2000年12月 研究論文(学術雑誌)
-
線状加熱における熱源移動時の加熱ガス流場の解析方法に関する研究
新海信隆, 冨田康光, 大沢直樹, 橋本聖史, 澤村淳司
関西造船協会誌, 234, pp. 229-235 No. 13 p. 125-128 2000年9月 研究論文(学術雑誌)
出版者・発行元:公益社団法人日本船舶海洋工学会
-
Fatigue Strength Evaluation of Ship Structural Members based on Fatigue Crack Growth Analysis
Yasumitsu Tomita, Kiyoshi Hashimoto, Naoki Osawa, Kouji Terai
Proc. the International Conference on Ship and Shipping Research (NAV2000), pp. 10.4.1-10.4.11 2000年9月
出版者・発行元:NAV
-
Study on Constitutive Model of Cycling Hardening Process
Naoki Osawa, Yasumitsu Tomita, Kiyoshi Hashimoto
Proc. 13th European Conference on Fracture, pp. D7.1-D7.8 2000年9月
-
線状加熱における燃焼流場から鋼板への熱移動に関する研究
澤村淳司, 冨田康光, 大沢直樹, 橋本聖史, 新海信隆
日本造船学会論文集, 187, pp. 373-381 Vol. 190 No. 190 p. 479-488 2000年6月 研究論文(学術雑誌)
-
Study of FEM Simulation of Cyclic Plastic Behavior of Face-Centered Cubic Crystal (F.C.C.) Crystalline Materials: 4th Report
Naoki Osawa, Yasumitsu Tomita, Kiyoshi Hashimoto
Proc. 9th International Offshore and Polar Engineering Conference (ISOPE-2000), IV, pp. 195-202 2000年5月 研究論文(国際会議プロシーディングス)
-
Numerical Analysis of Heat Flux on Combustion Flow Field During Line-Heating Process -1st Report: Heat Flux for Spot Heating
Yasumitsu Tomita, Naoki Osawa, Kiyoshi Hashimoto, Junji Sawamura, Nobutaka Shinkai
Proc. 9th International Offshore and Polar Engineering Conference (ISOPE-2000), IV, pp. 156-160 2000年5月 研究論文(国際会議プロシーディングス)
-
船体用多結晶金属材料の繰返し塑性変形挙動の数値シミュレーションに関する研究(その6) ---微視的変型機構に基づく繰返しすべり変型挙動の近似計算法---
冨田康光, 橋本聖史, 大沢直樹, 山鹿伸幸, 山田礼子
関西造船協会誌, 233, pp. 135-140 No. 233 p. 135-140 2000年3月 研究論文(学術雑誌)
出版者・発行元:公益社団法人日本船舶海洋工学会
-
結晶弾塑性有限要素法を用いた疲労き裂形成機構に関する研究(その3)
大沢直樹, 冨田康光, 橋本聖史, 山鹿伸幸, 山田礼子
日本造船学会論文集, 186, pp. 535-544 No. 186 p. 535-544 1999年12月 研究論文(学術雑誌)
出版者・発行元:日本造船学会
-
Numerical Simulation of Magnetic Hysteresis Properties Based on Landau-Lifshiz-Gilbert Equation
Yasumitsu Tomita, Kiyoshi Hashimoto, Naoki Osawa, Yasuo Yamada
Proc. 5th Far-East Conference on Nondestructive Testing (FENDT'99), pp. 137-144 1999年11月
-
線状加熱における燃焼流場の数値シミュレーション
冨田康光, 橋本聖史, 大沢直樹, 澤村淳司, 新海信隆
関西造船協会誌, 232, pp. 155-161 No. 232 p. 155-161 1999年9月 研究論文(学術雑誌)
出版者・発行元:公益社団法人日本船舶海洋工学会
-
Study on Approximate Method to Analyze Thermo-Flow Field During Line-Heating Process
Yasumitsu Tomita, Naoki Osawa, Kiyoshi Hashimoto, Nobutaka Shinkai
Proc. 9th International Offshore and Polar Engineering Conference (ISOPE-99), IV, pp. 181-186 1999年6月 研究論文(国際会議プロシーディングス)
-
Study of FEM Simulation of Cyclic Plastic Behavior of Face-centered Cubic Crystal (F.C.C.) Crystalline Materials: 3rd Report
Naoki Osawa, Yasumitsu Tomita, Kiyoshi Hashimoto
Proc. 9th International Offshore and Polar Engineering Conference (ISOPE-99), IV, pp. 140-145 1999年6月 研究論文(国際会議プロシーディングス)
-
結晶弾塑性有限要素法を用いた疲労き裂形成機構に関する研究(その2)
大沢直樹, 冨田康光, 橋本聖史, 松田勝也, 山鹿伸幸, 山田礼子
日本造船学会論文集, 185, pp. 283-292 No. 185 p. 283-292 1999年6月 研究論文(学術雑誌)
出版者・発行元:日本造船学会
-
結晶弾塑性有限要素法を用いた疲労き裂形成機構に関する研究(その1)
大沢直樹, 冨田康光, 橋本聖史, 松田勝也, 山鹿伸幸
日本造船学会論文集, 184, pp. 347-359 No. 184 p. 670-671 1998年12月 研究論文(学術雑誌)
出版者・発行元:日本造船学会
-
線状加熱における加熱時のガス流場の近似解法に関する研究
冨田康光, 橋本聖史, 大沢直樹, 吉川光昭, 萬 雅史, 新海信隆, 金田厚彦
日本造船学会論文集, 184, pp. 465-472 No. 184 p. 465-472 1998年12月 研究論文(学術雑誌)
出版者・発行元:日本造船学会
-
Study of FEM Simulation of Cyclic Plastic Behavior of Face-Centered Crystal (F.C.C.) Polycrystalline Materials: 2nd Report
Naoki Osawa, Yasumitsu Tomita, Kiyoshi Hashimoto, Katsuya Hirose
Proc. 8th International Offshore and Polar Engineering Conference (ISOPE-98), Vol. IV, pp. 347-352 1998年5月 研究論文(国際会議プロシーディングス)
-
歪取り作業のエキスパートシステムに関する研究
冨田康光, 橋本聖史, 大沢直樹, 谷田友良, 上月義雄, 松浦秀和, 山田泰生
関西造船協会誌,229,pp. 173-179 1998年3月 研究論文(学術雑誌)
-
船体構造用多結晶金属材料の繰返し塑性変形挙動の数値シミュレーションに関する研究(その4)
冨田康光, 橋本聖史, 大沢直樹, 宮園太介, 伴 大助
関西造船協会誌,229,pp. 163-172 No. 229 p. 163-172 1998年3月 研究論文(学術雑誌)
出版者・発行元:公益社団法人日本船舶海洋工学会
-
線状加熱における加熱ガス炎と鋼板との熱伝達に関する研究
冨田康光, 橋本聖史, 大沢直樹, 新海信隆, 澤村淳司
関西造船協会誌,229,pp. 181-187 1998年3月 研究論文(学術雑誌)
-
繰返し荷重下の船体用構造材料の変形挙動と強度特性に関する研究(その4)
冨田康光, 橋本聖史, 大沢直樹, 伴 大助, 宮園太介
日本造船学会論文集,182,pp. 741-750 No. 182 p. 741-750 1997年12月 研究論文(学術雑誌)
出版者・発行元:日本造船学会
-
Effects of Static Load on Fatigue Strength of Ship Structure
Wha Soo Kim, Hyndai Heavy, Industries Co, Yasumitsu Tomita, Kiyoshi Hashimoto, Naoki Osawa
Proc. 7th International Offshore and Polar Engineering Conference, IV, pp. 565-571 Vol. 565 1997年5月 研究論文(国際会議プロシーディングス)
-
Study of FEM Simulation of Cyclic Plastic Behavior of Face-Centered Crystal (F.C.C.) Polycrystalline Materials
Yasumitsu Tomita, Kiyoshi Hashimoto, Naoki Osawa, Taira Ozaki, Komatsu Co
Proc. 7th International Offshore and Polar Engineering Conference, IV, pp. 664-671 1997年5月 研究論文(国際会議プロシーディングス)
-
船体構造用多結晶金属材料の繰返し塑性変形挙動の数値シミュレーションに関する研究(その3) -- 面心立方有限変形速度依存モデルの計算 --
冨田康光, 橋本聖史, 大沢直樹, 広瀬活弥
関西造船協会誌, 227, pp. 95-107 No. 227 p. 95-107 1997年3月 研究論文(学術雑誌)
出版者・発行元:公益社団法人日本船舶海洋工学会
-
Material damping property of mild steel SS400B
Sadayoshi Chiaki, Yoshiteru Tanaka, Naoki Osawa, Kiyoshi Hashimoto
Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE Vol. 1 p. 277-283 1997年 研究論文(国際会議プロシーディングス)
出版者・発行元:ASME
-
繰返し荷重下の船体用構造材料の変形挙動と強度特性に関する研究(その3)
冨田康光, 橋本聖史, 大沢直樹, 宮園太介
日本造船学会論文集, 180, pp. 499-507 No. 180 p. 499-507 1996年12月 研究論文(学術雑誌)
出版者・発行元:日本造船学会
-
船体構造用多結晶金属材料の繰返し塑性変形挙動の数値シミュレーションに関する研究(その2) -- 面心立方3次元モデルの計算 --
冨田康光, 橋本聖史, 大沢直樹, 尾嵜平
関西造船協会誌, 226, pp. 117-184 No. 226 p. 177-184 1996年9月 研究論文(学術雑誌)
出版者・発行元:公益社団法人日本船舶海洋工学会
-
変動荷重下における鋼材の応力-歪応答と疲労強度に関する研究(その1)
冨田康光, 橋本聖史, 大沢直樹, 稲田陽一
関西造船協会誌, 225, pp. 201-208 No. 225 p. 201-208 1996年3月 研究論文(学術雑誌)
出版者・発行元:公益社団法人日本船舶海洋工学会
-
船体構造用多結晶金属材料の繰返し塑性変形挙動の数値シミュレーションに関する研究(その1)
冨田康光, 橋本聖史, 大沢直樹, 尾嵜 平
関西造船協会誌, 225, pp. 209-218 No. 225 p. 209-218 1996年3月 研究論文(学術雑誌)
出版者・発行元:公益社団法人日本船舶海洋工学会
-
Nondestructive estimation of fatigue damage for steel by Barkhausen noise analysis
Yasumitsu Tomita, Kiyoshi Hashimoto, Naoki Osawa
NDT and E International Vol. 29 No. 5 p. 275-280 1996年 研究論文(学術雑誌)
出版者・発行元:Elsevier Ltd
-
Non-destructive Estimation of Fatigue Damage for Steel by Balkhausen Noise Analysis
Yasumitsu Tomita, Kiyoshi Hashimoto, Naoki Osawa
Proc. 8th Asia-Pacific Conference on Non-destructive Testing, pp.421-428 p. 421-428 1995年12月
-
線状加熱による板曲げ作業工程のエキスパートシステムに関する研究
冨田康光, 橋本聖史, 大沢直樹, 福田柳生, 上月義雄, 脇田尋樹
関西造船協会誌, 224, pp. 121-130 Vol. 223 p. 89-94 1995年9月 研究論文(学術雑誌)
-
study of fatigue limit under variable-amplitude loading conditions
Yasumitsu Tomita, Kiyoshi Hashimoto, Naoki Osawa, Yoshihiro Nakamura
Proceedings of the Third (1993) International Offshore and Polar Engineering Conference p. 48-55 1993年 研究論文(国際会議プロシーディングス)
出版者・発行元:Publ by Int Soc of Offshore and Polar Engineerns (ISOPE)