-
Effect of beam shaping on spatter suppression in keyhole welding using 16kW disk laser
Masashi Nakatani, Masami Mizutani, Tomomasa Ohkubo, Yuji Sato, Masahiro Tsukamoto
Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXX p. 38-38 2025年3月19日 研究論文(国際会議プロシーディングス)
出版者・発行元:SPIE
-
The effect of plume removal on welding efficiency of pure copper using 1.5 kW blue diode laser
Mao Sudo, Shumpei Fujio, Kazuki Koda, Hideaki Shirai, Keisuke Takenaka, Masami Mizutani, Tim Pasang, Yuji Sato, Masahiro Tsukamoto
Applied Physics A Vol. 131 No. 4 2025年3月14日 研究論文(学術雑誌)
出版者・発行元:Springer Science and Business Media LLC
-
Effect of Laser Heat Input on Pure Copper Layer Formation by Wire-Based Directed Energy Deposition Using Blue Diode Laser
Satoshi YOSHIDA, Yuji SATO, Keisuke TAKENAKA, Masami MIZUTANI, Takeshi TAKAISHI, Masahiro TSUKAMOTO
Journal of Smart Processing Vol. 14 No. 2 p. 76-83 2025年3月10日 研究論文(学術雑誌)
出版者・発行元:Sumart Processing Society for Minerals, Environment and Energy
-
Spectroscopic Analysis of Blue Diode Laser Induced Plume Generated by Welding of Pure Copper
Keisuke Takenaka, Mao Sudo, Shumpei Fujio, Masami Mizutani, Yuji Sato, Masahiro Tsukamoto
MATERIALS TRANSACTIONS Vol. 66 No. 1 p. 113-116 2024年10月21日 研究論文(学術雑誌)
-
純銅溶接時に発生する青色半導体レーザー誘起プルームの分光解析
竹中 啓輔、須藤 真央、藤尾 駿平、水谷 正海、佐藤 雄二、塚本 雅裕
銅と銅合金 Vol. 63 No. 1 p. 171-175 2024年8月 研究論文(学術雑誌)
-
Formation of a low-dilution pure copper layer by wire-based laser metal deposition with blue diode laser
Satoshi Yoshida, Masami Mizutani, Keisuke Takenaka, Yuji Sato, Masahiro Tsukamoto
Proc. of SPIE p. 128720F-1-128720F-7 2024年3月 研究論文(国際会議プロシーディングス)
出版者・発行元:SPIE
-
Influence of the laser-induced plume on welding behavior in keyhole welding for stainless steel using a 16kW disk laser
Yoshiaki Kurita, Yuji Sato, Shumpei Fujio, Masami Mizutani, Masahiro Tsukamoto
Journal of Laser Applications Vol. 35 No. 4 2023年10月 研究論文(学術雑誌)
-
Observation of welding behavior for elucidation of spatter suppression mechanism in laser welding using a 16 kW disk laser
Yoshiaki Kurita, Tomoki Arita, Masami Mizutani, Yuji Sato, Hitoshi Nakano, Masahiro Tsukamoto
Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXVIII 2023年3月17日 研究論文(国際会議プロシーディングス)
出版者・発行元:SPIE
-
Experimental study on pure copper welding with the 1.5kW blue diode laser for realization of a carbonneutral society
Yuji Sato, Mao Sudo, Shumpei Fujio, Keisuke Takenaka, Masami Mizutani, Masahiro Tsukamoto
Proceeding of SPIE Vol. 12403 No. High-Power Diode Laser Technology XXI, p. 124030Q-1-124030Q-5 2023年3月 研究論文(国際会議プロシーディングス)
出版者・発行元:SPIE
-
In situ observation of dynamics of keyhole and molten pool in laser welding for development of spatter suppression
Tomoki Arita, Yuji Sato, Yoshiaki Kurita, Masami Mizutani, Hitoshi Nakano, Masahiro Tsukamoto
Journal of Laser Applications Vol. 34 No. 3 p. 032017-032017 2022年8月 研究論文(学術雑誌)
出版者・発行元:Laser Institute of America
-
高輝度青色半導体レーザマルチビームクラッディングシステムを用いた純銅皮膜の高速形成技術の開発
森本 健斗, 佐藤 雄二, 竹中 啓輔, 水谷 正海, 東條 公資, 林 良彦, 安積 一幸, 阿部 信行, 塚本 雅裕
レーザ加工学会誌 Vol. 29 No. 1 p. 23-30 2022年2月 研究論文(学術雑誌)
-
In situ x-ray observation of keyhole dynamics for laser beam welding of stainless steel with 16 kW disk laser
Yuji Sato, Naoki Shinohara, Tomoki Arita, Masami Mizutani, Tomomasa Ohkubo, Hitoshi Nakano, Masahiro Tsukamoto
Journal of Laser Applications Vol. 33 No. 4 p. 42043-042043 2021年11月 研究論文(学術雑誌)
出版者・発行元:Laser Institute of America
-
Evolution behavior of laser welding in hybrid structure between open-cell aluminum foam and solid aluminum shell
Wattanapornphan, P., Phongphisutthinan, C., Suga, T., Mizutani, M., Katayama, S.
Welding in the World Vol. 65 No. 2 p. 263-274 2021年2月 研究論文(学術雑誌)
-
Study on the weld bead formation on square-groove butt joint using plasma-MIG hybrid welding process
Ishida, K., Tashiro, S., Mizutani, M., Tanaka, M.
Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society Vol. 38 No. 2 p. 135s-138s 2021年 研究論文(学術雑誌)
-
Effect of focal position on laser-MAG arc hybrid weld bead of thick high-strength steel plate
Ishida, K., Tashiro, S., Mizutani, M., Tanaka, M.
Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society Vol. 38 No. 2 p. 131s-134s 2021年 研究論文(学術雑誌)
-
High-Brightness and High-Power Laser Welding of Powder Metallurgy Shape Memory Alloy: Welding-Parameter-Dependent Microstructure
Abdollah Bahador, Junko Umeda, Masami Mizutani, Esah Hamzah, Farazila Yusof, Katsuyoshi Kondoh
Journal of Materials Engineering and Performance Vol. 29 No. 2 p. 987-996 2020年1月 研究論文(学術雑誌)
出版者・発行元:Springer Science and Business Media LLC
-
Laser welding for joining of open-cell aluminum foam to solid shell
Phongphisutthinan, C., Wattanapornphan, P., Suga, T., Mizutani, M., Katayama, S.
Welding in the World Vol. 63 No. 3 p. 825-839 2019年5月 研究論文(学術雑誌)
-
Evolution Behavior of Laser Welding in Hybrid Structure between Open-Cell Aluminum Foam and Solid Aluminum Shell
P.Wattanapornphan, C.Phongphisutthinan, T.Suga, M.Mizutani, S.Katayama
71st Annual Assembly of Int. Inst. Welding (IIW) p. IIW Doc. XⅡ-2383-18-IIW Doc. XⅡ-2383-18 2018年7月 研究論文(国際会議プロシーディングス)
-
高出力・高輝度レーザを用いたステンレス鋼の水中レーザ貫通溶接特性
氷見 太, 川人 洋介, 水谷 正海, 井上 裕滋, 近藤 勝義
溶接学会論文集 Vol. 36 No. 1 p. 122-128 2018年3月 研究論文(学術雑誌)
-
Effects of edge oxides from laser cutting in laser-arc hybrid welding
Jan Frostevarg, Pan Qinglong, Masami Mizutani, Yousuke Kawahito, Seiji Katayama
Journal of Laser Applications Vol. 30 No. 1 2018年2月1日 研究論文(学術雑誌)
出版者・発行元:Laser Institute of America
-
Full penetration welding of thick high tensile strength steel plate with high-power disk laser in low vacuum
Katayama, S., Ido, R., Nishimoto, K., Mizutani, M., Mizutani, Y.
Welding International Vol. 32 No. 5 2018年 研究論文(学術雑誌)
-
Relationship between melt flows based on three-dimensional X-ray transmission in situ observation and spatter reduction by angle of incidence and defocussing distance in high-power laser welding of stainless steel
Kawahito, Y., Nakada, K., Uemura, Y., Mizutani, M., Nishimoto, K., Kawakami, H., Katayama, S.
Welding International Vol. 32 No. 7 2018年 研究論文(学術雑誌)
-
Characterisation of intermetallic phases in fusion welded commercially pure titanium and stainless steel 304
Pasang, T., Pramana, S.S., Kracum, M., Misiolek, W.Z., Aziziderouei, M., Mizutani, M., Kamiya, O.
Metals Vol. 8 No. 11 2018年 研究論文(学術雑誌)
-
現場で使える気流の見える化
水谷 正海
溶接学会誌 Vol. 86 No. 8 p. 579-583 2017年
出版者・発行元:一般社団法人 溶接学会
-
Elucidation of the effect of welding speed on melt flows in high-brightness and high-power laser welding of stainless steel on basis of three-dimensional X-ray transmission in situ observation
Kawahito, Y., Uemura, Y., Doi, Y., Mizutani, M., Nishimoto, K., Kawakami, H., Tanaka, M., Fujii, H., Nakata, K., Katayama, S.
Welding International Vol. 31 No. 3 p. 206-213 2017年 研究論文(学術雑誌)
-
Clarification of plume along laser axis above specimen
Masami Mizutani, Yousuke Kawahito, Seiji Katayama
Proceedings of 10th International Conference on Trends in Welding Research & 9th International Welding Symposium of Japan Welding Society (9WS) p. 77-80 2016年10月 研究論文(国際会議プロシーディングス)
-
Effects of incident laser angle or defocused position upon spatter reduction on basis of three-dimensional X-ray transmission in-situ observation of laser welding phenomena
Yousuke Kawahito, Kouki Nakada, Yousuke Uemura, Masami Mizutani, Hiroshi Kawakami, Koji Nishimoto, Seiji Katayama
Proceedings of 10th International Conference on Trends in Welding Research & 9th International Welding Symposium of Japan Welding Society (9WS) p. 69-72 2016年10月 研究論文(国際会議プロシーディングス)
-
Plume structure along laser axis during laser welding
M. Mizutani, Y. Kawahito, S. Katayama
69th IIW Annual Assembly and International Conference 2016 2016年7月 研究論文(国際会議プロシーディングス)
-
Femtosecond Laser Peening for Improvement of Fatigue Properties of Laser Welded 2024 Aluminum Alloy
Tomokazu SANO, Takayuki EIMURA, Akio HIROSE, Seiichiro TSUTSUMI, Masami MIZUTANI, Yousuke KAWAHITO, Seiji KATAYAMA, Kazuto ARAKAWA, Ayumi SHIRO, Takahisa SHOBU, Kiyotaka MASAKI, Yuji SANO
69th IIW Annual Assembly and International Conference 2016 2016年7月 研究論文(国際会議プロシーディングス)
-
Real-time observation of laser cutting fronts by X-ray transmission
Ozaki, H., Le, M.Q., Kawakami, H., Suzuki, J., Uemura, Y., Doi, Y., Mizutani, M., Kawahito, Y.
Journal of Materials Processing Technology Vol. 237 p. 181-187 2016年6月 研究論文(学術雑誌)
-
高張力鋼厚板のレーザ・炭酸ガスアークハイブリッド溶接における溶込み特性
藩 慶竜, 水谷 正海, 川人 洋介, 片山 聖二
レーザ加工学会誌 Vol. 23 No. 2 p. 53-58 2016年6月 研究論文(学術雑誌)
-
Effect of shielding gas on laser–MAG arc hybrid welding results of thick high-tensile-strength steel plates
Pan, Q., Mizutani, M., Kawahito, Y., Katayama, S.
Welding in the World Vol. 60 No. 4 p. 653-664 2016年6月 研究論文(学術雑誌)
-
High power disk laser-metal active gas arc hybrid welding of thick high tensile strength steel plates
Pan, Q., Mizutani, M., Kawahito, Y., Katayama, S.
Journal of Laser Applications Vol. 28 No. 1 2016年2月 研究論文(学術雑誌)
-
Microstructure and Mechanical Properties of Hybrid Welded Joints with Laser and CO2-Shielded Arc
Wahba, M., Mizutani, M., Katayama, S.
Journal of Materials Engineering and Performance Vol. 25 No. 7 2016年 研究論文(学術雑誌)
-
Single pass hybrid laser-arc welding of 25 mm thick square groove butt joints
Wahba, M., Mizutani, M., Katayama, S.
Materials and Design Vol. 97 2016年 研究論文(学術雑誌)
-
LA-TIG溶接による突合せ継手の作製
水谷 正海, 片山 聖二
溶接学会全国大会講演概要 Vol. 2016 p. 76-77 2016年
出版者・発行元:一般社団法人 溶接学会
-
Heシールドガスを用いたLA-TIG溶接
水谷 正海, 片山 聖二
溶接学会全国大会講演概要 Vol. 2016 p. 104-105 2016年
出版者・発行元:一般社団法人 溶接学会
-
ステンレス鋼の高出力レーザ溶接における3次元X線透視その場観察による湯流れと入射角および焦点はずし距離によるスパッタ抑制との関係
川人 洋介, 中田 光紀, 上村 洋輔, 水谷 正海, 西本 浩司, 川上 博士, 片山 聖二
溶接学会論文集 Vol. 34 No. 4 p. 239-248 2016年
出版者・発行元:一般社団法人 溶接学会
-
厚板鋼のレーザ・アークハイブリッド溶接
田中 悠介, 清水 翔太, 八木 義隆, 潘 慶竜, 水谷 正海, 片山 聖二
第84回レーザ加工学会講演論文集 p. 123-128 2016年1月 研究論文(研究会,シンポジウム資料等)
-
多電極アークを用いた厚鋼板のレーザ・アークハイブリッド溶接
落合 彦太郎, 木村 陵介, 小野 昇造, 潘 慶竜, 水谷 正海, 片山 聖二
第84回レーザ加工学会講演論文集 p. 117-122 2016年1月 研究論文(研究会,シンポジウム資料等)
-
レーザ溶接・接合
片山 聖二, 川人 洋介, 水谷 正海
第84回レーザ加工学会講演論文集 p. 1-10 2016年1月 研究論文(研究会,シンポジウム資料等)
-
低真空中における高出力ディスクレーザ溶接による高張力鋼厚板の貫通溶接
片山 聖二, 井戸 諒治, 西本 浩次, 水谷 正海, 川人 洋介
溶接学会論文集 Vol. 33 No. 3 p. 262-270 2015年11月 研究論文(学術雑誌)
出版者・発行元:JAPAN WELDING SOCIETY
-
Laser-Arc Hybrid Welding of Thick High Tensile Strength Steel Plates
Qinglong Pan, Masami Mizutani, Yousuke Kawahito, Seiji Katayama
Proc. of 34th International Congress on Applications of Lasers & Electro-Optics (ICALEO) 2015年10月 研究論文(国際会議プロシーディングス)
-
Investigation of Laser-Arc Hybrid Welding Utilizing CMT, Effects upon Oxygen and Nitrogen Contents as well as the Weld Stability Due to Oxygen Contents of the Shielding Gas and Gap Oxides
J. Frostevarg, M. Mizutani, Y. Kawahito, S. Katayama
68th Annual Assembly of Int. Inst. Welding (IIW) 2015年6月 研究論文(国際会議プロシーディングス)
-
Observation of Space above Specimen during Laser Welding
M. Mizutani, Y. Kawahito, S. Katayama
68th Annual Assembly of Int. Inst. Welding (IIW) 2015年6月 研究論文(国際会議プロシーディングス)
-
Laser-Arc Hybrid Welding Phenomena of Thick High-Tensile Strength Steel Plates
Q. Pan, M. Mizutani, Y. Kawahito, S. Katayama
68th Annual Assembly of Int. Inst. Welding (IIW) 2015年6月 研究論文(国際会議プロシーディングス)
-
Numerical Analysis of Microbubble Behavior and Microporosity Formation in Laser Beam Welds of Alminium Alloy
H. Mori, Q. Zhou, K. Koyama, F. Miyasaka, Y. Murakami, Y. Kawahito, M. Mizutani, S. Katayama
68th Annual Assembly of Int. Inst. Welding (IIW) 2015年6月 研究論文(国際会議プロシーディングス)
-
Numerical Analysis and In-Situ Observation of Bubble Behavior and Microporosity Formation in Laser Beam Welds of Aluminum Alloy
Qiaofeng Zhou, Yasuhito Honshou, Hiroaki Mori, Fumikazu Miyasaka, Yousuke Uemura, Masami Mizutani, Yousuke Kawahito, Seiji Katayama
Quarterly J. Japan Welding Soc. Vol. 33 No. 2 p. 53s-57s 2015年6月 研究論文(学術雑誌)
-
Hybrid welding with fiber laser and CO2 gas shielded arc
Wahba, M., Mizutani, M., Katayama, S.
Journal of Materials Processing Technology Vol. 221 p. 146-153 2015年3月 研究論文(学術雑誌)
-
ステンレス鋼の高輝度・高出力レーザ溶接時の溶融池内湯流れに及ぼす溶接速度の影響の三次元X線透視その場観察法による解明
川人 洋介, 上村 洋輔, 土井 雄一朗, 水谷 正海, 西本 浩司, 川上 博士, 田中 学, 藤井 英俊, 中田 一博, 片山 聖二
溶接学会論文集 Vol. 33 No. 1 p. 13-19 2015年3月 研究論文(学術雑誌)
-
Phenomena during Laser Welding or Hybrid Welding (Keynote Lecture)
Seiji Katayama, Yousuke KAWAHITO, Masami MIZUTANI
Proc. of 67th IIW International Conference 2014年7月 研究論文(国際会議プロシーディングス)
-
Super-High Power Fiber Laser Welding under Low Vacuum and Its Phenomena
Seiji KATAYAMA, Masami MIZUTANI, Yousuke KAWAHITO, Yoshinobu MAKINO, Wataru KONO, Shingo ITO, Daichi SUMIMORI
IIW Joint Meeting of Comm. IV, Comm. XII and SG212 2014年7月 研究論文(国際会議プロシーディングス)
-
Fundamental Research of 100 kW Ultra-High Power Fiber Laser Welding
Seiji KATAYAMA, Masami MIZUTANI, Yousuke KAWAHITO, Yoshinobu MAKINO, Wataru KONO, Shingo ITO, Daichi SUMIMORI
IIW Commission IV 2014年7月 研究論文(国際会議プロシーディングス)
-
Effect of reduced pressure atmosphere on weld geometry in partial penetration laser welding of stainless steel and aluminium alloy with high power and high brightness laser
Youhei, A., Yousuke, K., Hiroshi, N., Koji, N., Masami, M., Seiji, K.
Science and Technology of Welding and Joining Vol. 19 No. 4 2014年 研究論文(学術雑誌)
-
VOF法を用いたレーザ溶接シミュレーション
中川 龍幸、川本 篤寛、藤原 潤司、西村 仁志、王 静波、片山 聖二、水谷 正海
第80回レーザ加工学会講演論文集 Vol. 80 p. 111-116 2013年12月 研究論文(研究会,シンポジウム資料等)
出版者・発行元:レーザ加工学会
-
レーザ溶接現象の解明
片山 聖二、川人 洋介、水谷 正海
第80回レーザ加工学会講演論文集 Vol. 80 p. 79-86 2013年12月 研究論文(研究会,シンポジウム資料等)
出版者・発行元:レーザ加工学会
-
Phenomena and Suppression Conditions of Spattering during Laser and Hybrid Welding
S. Katayama, M. Mizutani, Y. Kawahito
66th Annual Assembly of Int. Inst. Welding (IIW) 2013年9月 研究論文(国際会議プロシーディングス)
-
Penetration Characteristics and Melt Flows during YAG Laser and TIG Arc Hybrid Welding
Y. Naito, M. Mizutani, S. katayama
Welding Guide Book 7 "Visualization and Simulation Technologies for Welding Processes p. III-101-III-106 2013年7月
-
Visualization of Optical Effects of Plumes Laser Welding
Y. Kawahito, M. Mizutani, S. Katayama, K. Nishimoto
Welding Guide Book 7 "Visualization and Simulation Technologies for Welding Processes p. III-5-III-9 2013年7月
-
High-Speed Video Techniques for Arc Welding Visualization under Diode Laser Illumination
M. Mizutani, Y. Kawahito, S. Katayama, K Nishimoto
Welding Guide Book 7 "Visualization and Simulation Technologies for Welding Processes p. III-1-III-4 2013年7月
-
Butt welding of thick, high strength steel plate with a high power laser and hot wire to improve tolerance to gap variance and control weld metal oxygen content
Ohnishi, T., Kawahito, Y., Mizutani, M., Katayama, S.
Science and Technology of Welding and Joining Vol. 18 No. 4 p. 314-322 2013年3月 研究論文(学術雑誌)
-
高出力・高輝度レーザを用いたステンレス鋼及びアルミニウム合金の部分溶込み溶接における減圧雰囲気の影響
阿部 洋平, 川人 洋介, 中村 浩, 西本 浩司, 水谷 正海, 片山 聖二
溶接学会論文集 Vol. 31 No. 1 p. 48-55 2013年3月 研究論文(学術雑誌)
-
Welding of aluminium alloy by using filler-added laser-arc hybrid welding process
Wang, J.-B., Nishimura, H., Katayama, S., Mizutani, M.
Welding International Vol. 27 No. 2 2013年 研究論文(学術雑誌)
-
YAGレーザ・TIGアークハイブリッド溶接における溶込み特性および湯流れ
内藤 恭章, 水谷 正海, 片山 聖二
溶接法ガイドブック7「溶接プロセスの可視化・シミュレーション技術」 p. III-97-III-102 2012年11月
-
ガスジェットによるレーザ溶接溶込み特性の検討および溶接現象のその場観察
張 旭東, 芦田 栄次, 片山 聖二, 水谷 正海
溶接法ガイドブック7「溶接プロセスの可視化・シミュレーション技術」 p. III-93-III-96 2012年11月
-
レーザ溶接における誘起プルームの光学影響の可視化
川人 洋介, 水谷 正海, 片山 聖二, 西本 浩司
溶接法ガイドブック7「溶接プロセスの可視化・シミュレーション技術」 p. III-5-III-8 2012年11月
-
半導体レーザを用いたアーク溶接の高速度カメラ撮影手法
水谷 正海, 川人 洋介, 片山 聖二, 西本 浩司
溶接法ガイドブック7「溶接プロセスの可視化・シミュレーション技術」 p. III-1-III-4 2012年11月
-
Latest Progress in Performance and Understanding of Laser Welding
Seiji Katayama, Yousuke Kawahito, Masami Mizutani
Physics Procedia Vol. 39 p. 8-16 2012年11月 研究論文(学術雑誌)
-
Deep Penetration Phenomena during Welding with Combined High Power Lasers
S. Katayama, M. Hirayama, M. Mizutani, Y. Kawahito
65th Annual Assembly of Int. Inst. Welding (IIW) 2012年7月 研究論文(国際会議プロシーディングス)
-
アルミニウム合金のレーザ・アークハイブリッド溶接
王 静波, 西村 仁志, 片山 聖二, 水谷 正海
第77回レーザ加工学会講演論文集 Vol. 77 p. 105-110 2012年5月 研究論文(研究会,シンポジウム資料等)
出版者・発行元:レーザ加工学会
-
TIG weld penetration improvement by laser-activated process with oxygen
Mizutani, M., Katayama, S.
Welding in the World Vol. 56 No. 1-2 p. 21-29 2012年4月 研究論文(学術雑誌)
-
Recent advances in laser welding
Seiji Katayama, Yousuke Kawahito, Masami Mizutani
Laser and Tera-Hertz Science and Technology, LTST 2012 2012年 研究論文(国際会議プロシーディングス)
-
Laser welding of die-cast AZ91D magnesium alloy
Wahba, M., Mizutani, M., Kawahito, Y., Katayama, S.
Materials and Design Vol. 33 No. 1 p. 569-576 2012年 研究論文(学術雑誌)
-
TIG weld penetration improvement by laser-activated process with oxygen
Mizutani, M., Katayama, S.
Rivista Italiana della Saldatura Vol. 64 No. 6 2012年 研究論文(学術雑誌)
-
Deep Penetration Welding with High Power Disk Lasers in Low Vacuum
Seiji Katayama, Yohei Abe, Ryoji Ido, Masami Mizutani, Yousuke Kawahito
Proc. of 30th International Congress on Applications of Lasers & Electro-Optics (ICALEO) p. 669-678 2011年10月 研究論文(国際会議プロシーディングス)
-
Deep Penetration Welds and Welding Phenomena with Combined Disk Lasers
Seiji Katayama, Masahiro Hirayama, Masami Mizutani, Yousuke Kawahito
Proc. of 30th International Congress on Applications of Lasers & Electro-Optics (ICALEO) p. 661-668 2011年10月 研究論文(国際会議プロシーディングス)
-
Evaporation phenomena of magnesium from droplet at welding wire tip in pulsed MIG arc welding of aluminium alloys
Wang, J.-B., Nishimura, H., Katayma, S., Mizutani, M.
Science and Technology of Welding and Joining Vol. 16 No. 5 p. 418-425 2011年7月 研究論文(学術雑誌)
-
Deep Penetration Welding with High Power Laser under Low Vacuum
Seiji KATAYAMA, Yohei ABE, Masami MIZUTANI, Yousuke KAWAHITO
IIW Commission IV p. IIW Doc. IV-1055-11/XII-2046-11/212-1204-11(1-9)-IIW Doc. IV-1055-11/XII-2046-11/212-1204-11(1-9) 2011年7月 研究論文(国際会議プロシーディングス)
-
アーク溶接の高速度カメラ撮影方法
水谷 正海
溶接学会誌 = Journal of the Japan Welding Society Vol. 80 No. 4 p. 317-321 2011年6月5日
出版者・発行元:JAPAN WELDING SOCIETY
-
Deep Penetration Welding with High-Power Laser under Vacuum
Kawahito Yousuke, Katayama Seiji, Abe Yohei, Mizutani Masami
Transactions of JWRI Vol. 40 No. 1 p. 15-19 2011年6月 研究論文(大学,研究機関等紀要)
出版者・発行元:大阪大学接合科学研究所
-
X-ray investigation of melt flow behavior under magnetic stirring regime in laser beam welding of aluminum
Gatzen, M., Tang, Z., Vollertsen, F., Mizutani, M., Katayama, S.
Journal of Laser Applications Vol. 23 No. 3 2011年5月 研究論文(学術雑誌)
-
Development of Deep Penetration Welding Technology with High Brightness Laser under Vacuum
Seiji Katayama, Yohei Abe, Masami Mizutani, Yousuke Kawahito
Physics Procedia Vol. 12 No. Part 1 p. 75-80 2011年5月 研究論文(学術雑誌)
-
Effect of atmosphere above specimen on welding results during remote welding
Oiwa, S., Kawahito, Y., Mizutani, M., Katayama, S.
Journal of Laser Applications Vol. 23 No. 2 2011年4月 研究論文(学術雑誌)
-
高出力・高輝度レーザによる高張力鋼厚板のホットワイヤ併用突合せ溶接法
大西 輝政、川人 洋介、水谷 正海、片山 聖二
溶接学会論文集 Vol. 29 No. 1 p. 41-47 2011年3月 研究論文(学術雑誌)
-
Welding of thick stainless steel plates up to 50 mm with high brightness lasers
Zhang, X., Ashida, E., Tarasawa, S., Anma, Y., Okada, M., Katayama, S., Mizutani, M.
Journal of Laser Applications Vol. 23 No. 2 2011年3月 研究論文(学術雑誌)
-
長焦点距離集光光学系を用いた高出力ファイバレーザ溶接時のレーザ誘起プルームの影響
川人 洋介、大岩 晋平、水谷 正海、片山 聖二
溶接学会論文集 Vol. 29 No. 1 p. 18-23 2011年2月 研究論文(学術雑誌)
-
高出力・高輝度レーザを用いた低真空溶接
川人 洋介, 阿部 洋平, 水谷 正海, 片山 聖二
第74回レーザ加工学会講演論文集 Vol. 74 p. 19-23 2010年12月 研究論文(研究会,シンポジウム資料等)
出版者・発行元:レーザ加工学会
-
フィラー併用ハイブリッド溶接(FLA溶接)法によるアルミニウム合金の溶接
王 静波, 西村 仁志, 片山 聖二, 水谷 正海
軽金属溶接 Vol. 48 No. 11 p. 12-22 2010年11月 研究論文(学術雑誌)
-
Keyhole stability in disc laser welding of AZ31B and AZ61A magnesium alloys and weld metal properties
Wahba, M., Mizutani, M., Kawahito, Y., Katayama, S.
Science and Technology of Welding and Joining Vol. 15 No. 7 p. 559-566 2010年10月 研究論文(学術雑誌)
-
レーザ溶接またはハイブリッド溶接時のポロシティの生成と防止
片山 聖二、水谷 正海
(社)溶接学会溶接冶金研究委員会創設50周年記念シンポジウム記念誌講演論文集 -「溶接冶金研究の進歩とイノベーション」- p. 24-27 2010年10月 研究論文(研究会,シンポジウム資料等)
-
Deep Penetration Welding with High Power Laser under Vacuum
Yohei Abe, Masami Mizutani, Yousuke Kawahito, Seiji Katayama
Proc. of 29th International Congress on Applications of Lasers & Electro-Optics (ICALEO 2010) p. 648-653 2010年9月 研究論文(国際会議プロシーディングス)
-
High-Brightness Disk Laser Welding of Magnesium Alloys
Mohamed Wahba, Masami Mizutani, Yousuke Kawahito, Seiji Katayama
Proc. of 29th International Congress on Applications of Lasers & Electro-Optics (ICALEO 2010) p. 429-435 2010年9月 研究論文(国際会議プロシーディングス)
-
Laser Welding and Hybrid Welding of Aluminium Alloys (Invited)
Seiji Katayama, Yousuke Kawahito, Masami Mizutani
Proceedings of the 12th International Conference on Aluminium Alloys p. 908-914 2010年9月 研究論文(国際会議プロシーディングス)
-
Elucidation of laser welding phenomena and factors affecting weld penetration and welding defects (Invited)
Seiji Katayama, Yousuke Kawahito, Masami Mizutani
Physics Procedia Vol. 5 No. Part2 p. 9-17 2010年8月 研究論文(学術雑誌)
-
Visualization of melt flows, plume or arc behavior during TIG, laser or laser-arc hybrid welding
S. Katayama, Y. Kawahito, M. Mizutani
IIW Joint Workshop of Commission IV, VII and SG212 Vol. 2010 No. 212-1172-10, XII-1996-10, IV-1035-10 p. 1-17 2010年7月 研究論文(国際会議プロシーディングス)
-
Effect of Plume and Induced Hot Air above Specimen on Laser Beam Refraction during Laser Welding
Masami Mizutani, Seiji Katayama
IIW Commission IV Vol. 2010 No. IV-1032-10 p. 1-11 2010年7月 研究論文(国際会議プロシーディングス)
-
High-Power Laser Butt Welding of High-Strength Steel Thick-Plate
Seiji Katayama, Terumasa Onishi, Masami Mizutani, Yousuke Kawahito
IIW Commission IV Vol. 2010 No. IV-1031-10 p. 1-7 2010年7月 研究論文(国際会議プロシーディングス)
-
Laser Welding and Hybrid Welding of Aluminium Alloys (Invited)
S. Katayama, Y. Kawahito, M. Mizutani
Proc. of 11th INALCO Conference 2010 "New Frontiers in Light Metals" p. 79-90 2010年6月 研究論文(国際会議プロシーディングス)
出版者・発行元:IOS Press
-
フィラー併用ハイブリッド溶接法
王 静波、西村 仁志、片山 聖二、水谷 正海
第73回レーザ加工学会講演論文集 Vol. 73 p. 99-107 2010年5月 研究論文(研究会,シンポジウム資料等)
出版者・発行元:レーザ加工学会
-
ファイバーレーザリモート溶接における誘起プルーム挙動とその影響
片山 聖二、大岩 晋平、川人 洋介、水谷 正海
第73回レーザ加工学会講演論文集 Vol. 73 p. 81-90 2010年5月 研究論文(研究会,シンポジウム資料等)
出版者・発行元:レーザ加工学会
-
フィラーワイヤ利用ハイブリッド溶接の開発
西村 仁志、王 静波、片山 聖二、水谷 正海
LMPシンポジウム2010「レーザおよびレーザ加工の基礎と応用」 p. 71-78 2010年3月 研究論文(研究会,シンポジウム資料等)
出版者・発行元:(社)日本溶接協会 レーザ加工技術研究委員会(LMP委員会)
-
Welding Phenomena and Weld Penetration during Laser or Hybrid Welding (Invited)
Seiji Katayama, Yousuke Kawahito, Masami Mizutani
Conf. Proc. PICALO (4th Pacific Int. Conf. on Applications of Lasers & Optics), Laser Institute of America, LIA Pub#403 Vol. 4 2010年3月 研究論文(国際会議プロシーディングス)
-
High-power Fiber Laser Butt Welding of Thick High-strength Steel Plate using Sensing System with Hot Wire
Terumasa Onishi, Masami Mizutani, Yousuke Kawahito, Seiji Katayama
Proc. of 28th International Congress on Applications of Lasers & Electro-Optics (ICALEO 2009) p. 773-779 2009年11月 研究論文(国際会議プロシーディングス)
-
Welding of Thick Stainless Steel Plates up to 50MM with High Brightness Lasers
Xudong Zhang, Eiji Ashida, Shoh Tarasawa, Yusuke Anma, Masaya Okada, Seiji Katayama, Masami Mizutani
Proc. of 28th International Congress on Applications of Lasers & Electro-Optics (ICALEO 2009) p. 690-696 2009年11月 研究論文(国際会議プロシーディングス)
-
Numerical Calculation of Laser Beam Path Influenced by High Temperature Gas Above Specimen during Laser Welding
Masami Mizutani, Seiji Katayama
Proc. of 28th International Congress on Applications of Lasers & Electro-Optics (ICALEO 2009) p. 600-609 2009年11月 研究論文(国際会議プロシーディングス)
-
Filler added laser-arc hybrid welding (FLA welding) of thin aluminium alloy and steel sheets
J.-b. Wang, H. Nishimura, S. Katayama, M. Mizutani
Proceedings of LAMP2009-5th International Congress on Laser Advanced Materials Processing 2009年9月 研究論文(国際会議プロシーディングス)
-
High power fiber laser welding with focusing optics of long Rayleigh length
Y. Abe, M. Mizutani, Y. Kawahito, S. Katayama
Proceedings of LAMP2009-5th International Congress on Laser Advanced Materials Processing 2009年9月 研究論文(国際会議プロシーディングス)
-
Deep Penetration Welding of Thick Section Steels with 10 kW Fiber Laser
Zhang Xudong, Ashida Eiji, Katayama Seiji, Mizutani Masami
溶接学会論文集 Vol. 27 No. 2 p. 64s-68s 2009年8月 研究論文(学術雑誌)
-
Hybrid Welding Phenomena of Aluminium or Steel with YAG Laser and TIG/MAG Arc
S. Katayama, Y. Naito, S. Uchiumi, M. Mizutani
62nd Annual Assembly of Int. Inst. Welding (IIW), Joint Workshop 2009年7月 研究論文(国際会議プロシーディングス)
-
ステンレス鋼の高輝度ファイバーレーザ溶接現象の解明
川人 洋介, 水谷 正海, 片山 聖二
高温学会誌 Vol. 35 No. 4 p. 189-198 2009年7月 研究論文(学術雑誌)
-
Fundamentals of Fiber Laser Remote Welding and Deep Penetration Welding (Invited)
S. Katayama, S. Oiwa, N. Matsumoto, M. Mizutani, Y. Kawahito
Proc. of the Fifth Int. WTL-Conference on Lasers in Manufacturing 2009 p. 829-835 2009年6月 研究論文(国際会議プロシーディングス)
-
High quality welding of stainless steel with 10 kW high power fibre laser
Kawahito, Y., Mizutani, M., Katayama, S.
Science and Technology of Welding and Joining Vol. 14 No. 4 p. 588-594 2009年4月 研究論文(学術雑誌)
-
深溶込みが得られるLA-TIG溶接法の開発
水谷 正海, 片山 聖二
配管技術 Vol. 51 No. 4 p. 22-28 2009年3月
出版者・発行元:日本工業出版
-
レーザリモート溶接における誘起プルーム挙動とその影響
片山 聖二, 大岩 晋平, 水谷 正海, 川人 洋介
LMPシンポジウム2009「レーザ加工の新プロセス展開と性能評価、規格化の最近のトレンド」 p. 33-51 2009年2月 研究論文(研究会,シンポジウム資料等)
-
Welding phenomena and in-process monitoring in high-power YAG laser welding of aluminium alloy
Katayama, S., Kawaguchi, S., Mizutani, M., Kawahito, Y., Tarui, T.
Welding International Vol. 23 No. 10 2009年 研究論文(学術雑誌)
-
Study of improvement of gap tolerance in laser MIG arc hybrid welding of aluminium alloy
Wang, J.-B., Nishimura, H., Fujii, K., Katayama, S., Mizutani, M.
Welding International Vol. 23 No. 10 2009年 研究論文(学術雑誌)
-
Fibre laser welding of aluminium alloy
Katayama, S., Nagayama, H., Mizutani, M., Kawahito, Y.
Welding International Vol. 23 No. 10 2009年 研究論文(学術雑誌)
-
Optical Interaction between Laser Beam and Induced Plume in the Ultra-High Power Density Fiber Laser Welding of Stainless Stee
KATAYAMA Seiji, KAWAHITO Yousuke, MIZUTANI Masami
Transactions of JWRI Vol. 37 No. 2 p. 19-25 2008年12月 研究論文(大学,研究機関等紀要)
出版者・発行元:大阪大学接合科学研究所
-
リモートレーザ溶接時の溶込み特性とそれに及ぼすプルームの影響
片山 聖二, 大岩 晋平, 水谷 正海, 川人 洋介, 石田 英伸, 小沢 直樹
第71回レーザ加工学会講演論文集 Vol. 71 p. 109-118 2008年12月 研究論文(研究会,シンポジウム資料等)
-
高出力ファイバーレーザ溶接における溶込み深さ増大技術の検討
張 旭東, 芦田 栄次, 片山 聖二, 水谷 正海
第71回レーザ加工学会講演論文集 Vol. 71 p. 15-19 2008年12月 研究論文(研究会,シンポジウム資料等)
-
Characterisation of plasma induced during high power fibre laser welding of stainless steel
Kawahito, Y., Matsumoto, N., Mizutani, M., Katayama, S.
Science and Technology of Welding and Joining Vol. 13 No. 8 p. 744-748 2008年11月 研究論文(学術雑誌)
-
Effect of weakly ionised plasma on penetration of stainless steel weld produced with ultra high power density fibre laser
Kawahito, Y., Kinoshita, K., Matsumoto, N., Mizutani, M., Katayama, S.
Science and Technology of Welding and Joining Vol. 13 No. 8 p. 749-753 2008年11月 研究論文(学術雑誌)
-
Laser Absorption in High-Power Fiber Laser Welding of Stainless Steel and Aluminum Alloy
Naoyuki Matsumoto, Yousuke Kawahito, Masami Mizutani, Seiji Katayama
Proc. of 27th International Congress on Applications of Lasers & Electro-Optics (ICALEO 2008) p. 387-391 2008年10月 研究論文(国際会議プロシーディングス)
-
アルミニウム合金の高出力YAGレーザ溶接における溶接現象とインプロセスモニタリング
片山 聖二、川口 聰、水谷 正海、川人 洋介、樽井 大志
軽金属溶接 Vol. 46 No. 10 p. 480-490 2008年10月 研究論文(学術雑誌)
出版者・発行元:Japan Light Metal Welding Association
-
アルミニウム合金のファイバーレーザ溶接
片山 聖二、長山 展公、水谷 正海、川人 洋介
軽金属溶接 Vol. 46 No. 10 p. 470-479 2008年10月 研究論文(学術雑誌)
出版者・発行元:Japan Light Metal Welding Association
-
Development of Ultra Deep Penetration Welding with 10kW Fiber Laser
Xudong Zhang, Eiji Ashida, Seiji Katayama, Masami Mizutani
Proc. of 27th International Congress on Applications of Lasers & Electro-Optics (ICALEO 2008) p. 374-379 2008年10月 研究論文(国際会議プロシーディングス)
-
アルミニウム合金のレーザ・MIGアークハイブリッド溶接における許容ギャップの拡大に関する研究
王 静波、西村 仁志、藤井 孝治、片山 聖二、水谷 正海
軽金属溶接 Vol. 46 No. 10 p. 447-458 2008年10月 研究論文(学術雑誌)
出版者・発行元:Japan Light Metal Welding Association
-
ステンレス鋼の10kW高出力ファイバーレーザ溶接時の欠陥形成機構と防止法
川人 洋介, 水谷 正海, 片山 聖二
溶接学会論文集 Vol. 26 No. 3 p. 203-209 2008年8月 研究論文(学術雑誌)
-
Effect of Laser-Induced Plume on Laser Beam Focusing during Remote Welding
Seiji Katayama, Shinpei Oiwa, Hidenobu Ishida, Naoki Ozawa, Masami Mizutani, Yousuke Kawahito
61st Annual Assembly of Int. Inst. Welding (IIW) 2008年7月 研究論文(国際会議プロシーディングス)
-
Understanding of laser and hybrid welding phenomena
Katayama, S., Kawahito, Y., Mizutani, M.
Materials Science Forum Vol. 580-582 p. 535-538 2008年6月 研究論文(学術雑誌)
出版者・発行元:Materials Science Forum
-
アルミニウム合金レーザ溶接部の疲労特性
水谷 正海, 山口 康啓, 片山 聖二
軽金属溶接 Vol. 46 No. 2 p. 56-64 2008年2月 研究論文(学術雑誌)
出版者・発行元:軽金属溶接構造協会
-
Fatigue properties of laser weld in aluminium alloy
Mizutani, M., Yamaguchi, Y., Katayama, S.
Welding International Vol. 22 No. 10 2008年 研究論文(学術雑誌)
-
Investigation of High-Power Fiber Laser Welding Phenomena of Stainless Steel
KAWAHITO Yousuke, MIZUTANI Masami, KATAYAMA Seiji
Trans. JWRI Vol. 36 No. 2 p. 11-15 2007年12月 研究論文(大学,研究機関等紀要)
-
ステンレス鋼のレーザ溶接性に及ぼすガス成分の影響
片山 聖二, 川人 洋介, 水谷 正海
第69回レーザ加工学会講演論文集 p. 161-170 2007年12月 研究論文(研究会,シンポジウム資料等)
-
Weld Penetration and Welding Phenomena of Aluminum Alloy with High-Power Fiber Laser
H. Nagayama, M. Mizutani, Y. Kawahito, S. Katayama
Proc. of 26th International Congress on Applications of Lasers & Electro-Optics (ICALEO 2007) p. 916-924 2007年10月 研究論文(国際会議プロシーディングス)
-
High-Power Fiber Laser Welding of Thick Steel at Low Welding Speed
X. Zhang, E. Ashida, S. Katayama, M. Mizutani, Y. Anma, X. Luo
Proc. of 26th International Congress on Applications of Lasers & Electro-Optics (ICALEO 2007) p. 850-857 2007年10月 研究論文(国際会議プロシーディングス)
-
Laser Weld Penetration Improvement by Laser Activation Process with Oxygen
M. Mizutani, S. Katayama
Proc. of 26th International Congress on Applications of Lasers & Electro-Optics (ICALEO 2007) p. 426-435 2007年10月 研究論文(国際会議プロシーディングス)
-
Collaboration of Physics and Metallurgical Viewpoints for Understanding and Process Development of Laser Welding
S. Katayama, Y. Kawahito, M. Mizutani
Proc. of 26th International Congress on Applications of Lasers & Electro-Optics (ICALEO 2007) p. 360-369 2007年10月 研究論文(国際会議プロシーディングス)
-
Weld Penetration and Phenomena in 10 kW Fiber Laser Welding
S. Katayama, Y. Kawahito, K. Kinoshita, N. Matsumoto, M. Mizutani
Proc. of 26th International Congress on Applications of Lasers & Electro-Optics (ICALEO 2007) p. 353-359 2007年10月 研究論文(国際会議プロシーディングス)
-
Penetration Phenomena and Gap Tolerance in YAG Laser-MIG Hybrid Welding of Aluminum Alloy
J.-B. Wang, H. Nishimura, K. Fujii, S. Katayama, M. Mizutani, S. Uchiumi
Proc. of the 10th International Conference on Joints in Aluminium (INALCO 2007) p. 151-162 2007年10月 研究論文(国際会議プロシーディングス)
-
Laser Welding Phenomena of Aluminum Alloy with High-Power Fiber Laser
H. Nagayama, M. Mizutani, Y. Kawahito, S. Katayama
Proc. of the 10th International Conference on Joints in Aluminium (INALCO 2007) p. 137-142 2007年10月 研究論文(国際会議プロシーディングス)
-
Weld Penetration, Defect Prevention and Phenomena in Laser and Hybrid Welding of Aluminium Alloy
S. Katayama, Y. Kawahito, M. Mizutani
Proc. of the 10th International Conference on Joints in Aluminium (INALCO 2007) p. 53-62 2007年10月 研究論文(国際会議プロシーディングス)
-
Elucidation of high-power fibre laser welding phenomena of stainless steel and effect of factors on weld geometry
Kawahito, Y., Mizutani, M., Katayama, S.
Journal of Physics D: Applied Physics Vol. 40 No. 19 p. 5854-5859 2007年9月 研究論文(学術雑誌)
-
超高パワー密度ファイバーレーザによるステンレス鋼溶接時のレーザと誘起プラズマ/プルームとの相互作用
川人 洋介, 木下 圭介, 松本 直幸, 水谷 正海, 片山 聖二
溶接学会論文集 Vol. 25 No. 3 p. 461-467 2007年9月 研究論文(学術雑誌)
-
高出力ファイバーレーザによるステンレス鋼溶接時のレーザ誘起プルームの高速度観察および分光分析
川人 洋介, 木下 圭介, 松本 直幸, 水谷 正海, 片山 聖二
溶接学会論文集 Vol. 25 No. 3 p. 455-460 2007年9月 研究論文(学術雑誌)
-
Understanding of Laser and Hybrid Welding Phenomena
Seiji Katayama, Yousuke Kawahito, Masami Mizutani
60th Annual Assembly of Int. Inst. Welding (IIW) 2007年7月 研究論文(国際会議プロシーディングス)
-
Plume behaviour and melt flows during laser and hybrid welding
S. Katayama, Y. Kawahito, M. Mizutani
Proc. of the Fourth Int. WLT-Conference on Lasers in Manufacturing 2007 p. 265-271 2007年6月 研究論文(国際会議プロシーディングス)
-
Hybrid Welding Phenomena with YAG/TIG or YAG/MIG
Seiji Katayama, Yasuaki Naito, Satoru Uchiumi, Masami Mizutani, Francis Briand
10th International Workshop: High speed diagnostics of coupling and melt flow phenomena in laser welding 2007年6月 研究論文(国際会議プロシーディングス)
-
Welding Phenomena with CO2, YAG or Fiber Laser
Seiji Katayama, Yousuke Kawahito, Masami Mizutani
10th International Workshop: High speed diagnostics of coupling and melt flow phenomena in laser welding 2007年6月 研究論文(国際会議プロシーディングス)
-
高出力ファイバーレーザ溶接現象
川人 洋介, 木下 圭介, 松本 直幸, 水谷 正海, 片山 聖二
第68回レーザ加工学会講演論文集 Vol. 68 p. 81-86 2007年5月 研究論文(研究会,シンポジウム資料等)
出版者・発行元:(社)高温学会レーザ加工学会
-
ステンレス鋼の高出力ファイバーレーザ溶接とその特徴的な溶接部の形成機構の解明
木下 圭介, 水谷 正海, 川人 洋介, 片山 聖二
溶接学会論文集 Vol. 25 No. 1 p. 18-23 2007年2月 研究論文(学術雑誌)
-
Penetration and porosity prevention mechanism in YAG laser-MIG hybrid welding
Katayama, S., Uchiumi, S., Mizutani, M., Wang, J., Fujii, K.
Welding International Vol. 21 No. 1 2007年 研究論文(学術雑誌)
-
Laser-arc hybrid welding
Katayama, S., Naito, Y., Uchiumi, S., Mizutani, M.
Solid State Phenomena Vol. 127 p. 24-24 2007年 研究論文(学術雑誌)
出版者・発行元:Solid State Phenomena
-
Laser Brazing Phenomena of Galvanized Steel and Pit Formation Mechanism
Seita Kimura, Shinsuke Takemura, Masami Mizutani, Seiji Katayama
Congress Proceedings of ICALEO 2006 (25th International Congress on Applications of Lasers & Electro-Optics), LIA Pub#599 Vol. 99 No. Paper #528 p. 346-354 2006年10月 研究論文(国際会議プロシーディングス)
-
Phenomena of Welding with High-Power Fiber Laser
Keisuke Kinoshita, Masami Mizutani, Yousuke Kawahito, Seiji Katayama
Congress Proceedings of ICALEO 2006 (25th International Congress on Applications of Lasers & Electro-Optics), LIA Pub#599 Vol. 99 No. Paper #902 p. 535-542 2006年10月 研究論文(国際会議プロシーディングス)
-
Physical Phenomena and Porosity Prevention Mechanism in Laser-Arc Hybrid Welding
KATAYAMA Seiji, NAITO Yasuaki, UCHIUMI Satoru, MIZUTANI Masami
Trans. JWRI Vol. 35 No. 1 p. 13-18 2006年9月 研究論文(大学,研究機関等紀要)
出版者・発行元:JWRI
-
Mechanical Properties of Laser-Welded Aluminum Alloy
KATAYAMA Seiji, MIZUTANI Masami, MATSUNAWA Akira
IIW Doc. IV-905-06 2006年9月 研究論文(国際会議プロシーディングス)
-
Phenomena and Penetration Characteristics in High Power Fiber Laser Welding
KATAYAMA Seiji, KINOSHITA Keisuke, MIZUTANI Masami, KAWAHITO Yousuke
IIW Doc. IV-904-06 2006年9月 研究論文(国際会議プロシーディングス)
-
高出力ファイバーレーザ溶接現象と溶込み特性
木下 圭介, 水谷 正海, 川人 洋介, 片山 聖二
第66回レーザ加工学会講演論文集 Vol. 66 p. 157-161 2006年6月 研究論文(研究会,シンポジウム資料等)
出版者・発行元:
-
各種材料のレーザ接合現象と接合結果
片山 聖二, 川人 洋介, 水谷 正海
第66回レーザ加工学会講演論文集 Vol. 66 p. 1-8 2006年6月 研究論文(研究会,シンポジウム資料等)
出版者・発行元:
-
Phenomena during High Power Fiber Laser Welding
K. Kinoshita, Y. Kawahito, M. Mizutani, S. Katayama
Online Proceedings of LAMP2006 2006年5月 研究論文(国際会議プロシーディングス)
-
ハイブリッド溶接における溶込み特性、ポロシティの防止機構および溶融池内湯流れ現象の解明 -YAGレーザ・TIGアークハイブリッド溶接現象の解明(第4報)-
内藤 恭章, 水谷 正海, 片山 聖二
溶接学会論文集 Vol. 24 No. 2 p. 149-161 2006年5月 研究論文(学術雑誌)
出版者・発行元:社団法人溶接学会
-
Penetration and porosity prevention mechanism in YAG laser-MIG hybrid welding
Seiji Katayama, Satoru Uchiumi, Masami Mizutani, Jing-Bo Wang, Kouji Fujii
Keikinzoku Yosetsu/Journal of Light Metal Welding and Construction Vol. 44 No. 3 p. 11-21 2006年3月 研究論文(学術雑誌)
-
アルミニウム合金のYAGレーザ・MIGハイブリッド溶接における溶込み特性とポロシティの防止
片山 聖二, 内海 怜, 水谷 正海, 王 静波, 藤井 孝治
軽金属溶接 Vol. 44 No. 3 p. 99-109 2006年3月 研究論文(学術雑誌)
出版者・発行元:軽金属溶接構造協会
-
Effect of oxygen in ambient atmosphere on penetration characteristics in single yttrium-aluminum-garnet laser and hybrid welding
Naito, Y., Mizutani, M., Katayama, S.
Journal of Laser Applications Vol. 18 No. 1 p. 21-27 2006年2月 研究論文(学術雑誌)
-
ハイブリッド溶接時におけるアークの電気的計測-YAGレーザ・TIGアークハイブリッド溶接現象の解明(第3報)-
内藤 恭章, 水谷 正海, 片山 聖二
溶接学会論文集 Vol. 24 No. 1 p. 45-51 2006年2月 研究論文(学術雑誌)
出版者・発行元:社団法人溶接学会
-
ハイブリッド溶接の溶込み特性に及ぼす周辺雰囲気の影響-YAGレーザ・TIGアークハイブリッド溶接現象の解明(第2報)-
内藤 恭章, 水谷 正海, 片山 聖二
溶接学会論文集 Vol. 24 No. 1 p. 39-44 2006年2月 研究論文(学術雑誌)
出版者・発行元:社団法人溶接学会
-
YAGレーザ・TIGアークハイブリッド溶接における溶込み特性とアーク・プラズマ/プルーム挙動-YAGレーザ・TIGアークハイブリッド溶接現象の解明(第1報)-
内藤 恭章, 水谷 正海, 片山 聖二
溶接学会論文集 Vol. 24 No. 1 p. 32-38 2006年2月 研究論文(学術雑誌)
出版者・発行元:社団法人溶接学会
-
Penetration characteristics in YAG laser and TIG arc hybrid welding, and arc and plasma /plume behaviour during welding. Welding phenomena in hybrid welding using YAG laser and TIG arc (First Report)
Naito, Y., Mizutani, M., Katayama, S.
Welding International Vol. 20 No. 10 2006年 研究論文(学術雑誌)
-
Effect of ambient atmosphere on penetration geometry in single laser and laser-arc hybrid welding. Welding phenomena in hybrid welding using YAG laser and TIG arc (second report)
Naito, Y., Mizutani, M., Katayama, S.
Welding International Vol. 20 No. 12 2006年 研究論文(学術雑誌)
-
YAG Laser Lap Welding Phenomena of Zn-Coated Steel Sheets and Monitoring of Reflected Beam
Seiji Katayama, Masami Mizutani, Taishi Tarui, Kiyokazu Mori
Proc. of Int. Symp. on Joining Technologies in Advanced Automobile Assembly 2005 (JAAA 2005), Japan Welding Society p. 151-158 2005年10月 研究論文(国際会議プロシーディングス)
-
YAG Laser and TIG Arc Hybrid Welding Phenomena
S. KATAYAMA, Y. NAITO, M. MIZUTANI
Joining of Advanced and Specialty Materials VII (Conf. Proc. from Materials Solutions '04), ASM International, (2005) p. 183-188 2005年7月 研究論文(国際会議プロシーディングス)
-
Laser weldability of aluminum alloy and steel
Katayama, S., Joo, S.-M., Mizutani, M., Bang, H.-S.
Materials Science Forum Vol. 502 p. 481-486 2005年6月 研究論文(学術雑誌)
出版者・発行元:Materials Science Forum
-
亜鉛めっき鋼板薄板のレーザ溶接とモニタリング
片山 聖二, 水谷 正海, 樽井 大志, 森 清和
第63回レーザ加工学会講演論文集 Vol. 63 p. 87-92 2005年5月 研究論文(研究会,シンポジウム資料等)
出版者・発行元:
-
Annual Report of 2004 Project on Hybrid Welding
KATAYAMA S., MIZUTANI M., NAITO Y., UCHIUMI S.
Proc. of The 2nd Symposium of the Laser-Arc Hybrid Welding Technology for the Productivity Improvement in the Heavy Industry Vol. 2 p. 28-44 2005年5月 研究論文(国際会議プロシーディングス)
出版者・発行元:KITECH
-
YAG Laser and TIG Arc Hybrid Welding Phenomena
KATAYAMA S., NAITO Y., MIZUTANI M.
Materials Solutions Conference and Exposition Vol. (JOI 10.3) No. (JOI 10.3) 2005年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:ASM International.
-
Welding Phenomena and Reflected Beam Monitoring during YAG Laser Lap Welding of Zn-Coated Steels
KATAYAMA Seiji, MIZUTANI Masami, TARUI Taishi, MORI Kiyokazu
Trans. JWRI Vol. 33 No. 1 p. 11-16 2004年10月 研究論文(大学,研究機関等紀要)
出版者・発行元:JWRI, Osaka University
-
Elucidation of laser welding phenomena and porosity formation mechanism, and preventive procedures
KATAYAMA S., MIZUTANI M.
Journal of Lanzhou University of Technology (Proc. of Dunhuang International Welding Forum) p. 14-22 2004年8月 研究論文(国際会議プロシーディングス)
出版者・発行元:Lanzhou Ligong Daxue Xuebao, Vol. 30
-
Monitoring and phenomena observation during YAG laser lap welding of Zn-coated steel sheets
KATAYAMA S., MIZUTANI M., TARUI T., and MORI K.
Journal of Lanzhou University of Technology (Proc. of Dunhuang International Welding Forum) Vol. 30 No. Suppl. p. 8-13 2004年8月 研究論文(国際会議プロシーディングス)
-
YAG Laser-TIG Arc Hybrid Welding Phenomena of Stainless Steel
KATAYAMA S., NAITO Y., and MIZUTANI M.
Proc. of the Finnish-German-Japanese Joint International Seminar on Mechanical and Metallurgical Approaches to New Joining Process p. 134-139 2004年7月 研究論文(国際会議プロシーディングス)
-
YAGレーザおよびYAG-TIGハイブリッド溶接時の溶融池内部挙動
片山 聖二, 内藤 恭章, 水谷 正海
第61回レーザ加工学会論文集 Vol. 61 p. 99-104 2004年6月 研究論文(研究会,シンポジウム資料等)
出版者・発行元:レーザ加工学会
-
Laser-Arc Hybrid Welding
KATAYAMA S., NAITO Y., MIZUTANI M., UCHIUMI S., and WANG J.B.
Proc. of The 1st Symposium for Improving Productivity in Heavy Industry -Development of Hybrid Welding Technology- Vol. 1 2004年5月 研究論文(国際会議プロシーディングス)
出版者・発行元:KITECH
-
アルミニウム合金のYAGレーザ・MIGハイブリッド溶接における溶込み特性と溶接現象
内海 怜, 王 静波, 水谷 正海, 本宮 紀典, 藤井 孝治, 片山 聖二
第62回レーザ加工学会論文集 Vol. 62 p. 10-18 2004年4月 研究論文(研究会,シンポジウム資料等)
出版者・発行元:レーザ加工学会
-
アルミニウム合金のYAGレーザ溶接現象とモニタリング信号の相関
川口 聰, 水谷 正海, 樽井 大志, 片山 聖二
第62回レーザ加工学会論文集 Vol. 62 p. 37-44 2004年4月 研究論文(研究会,シンポジウム資料等)
出版者・発行元:レーザ加工学会
-
Effect of Ambient Atmosphere on Penetration Geometry in Laser and Hybrid Welding
NAITO Y., MIZUTANI M., KATAYAMA S., BANG H.-S.
Congress Proc. of ICALEO 2004 2004年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:LIA
-
Penetration and Welding Phenomena in YAG Laser-MIG Hybrid Welding of Aluminum Alloy
UCHIUMI S., WANG J-B., KATAYAMA S., MIZUTANI M., HONGU T., FUJII K.
Congress Proc. of ICALEO 2004 2004年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:LIA
-
X-Ray observation of keyhole instability in zinc molten pool and estimation of recoil pressure in laser welding
Masami Mizutani, Seiji Katayama, Akira Matsunawa
PICALO 2004 - 1st Pacific International Conference on Applications of Laser and Optics, Conference Proceedings p. 23-28 2004年 研究論文(国際会議プロシーディングス)
出版者・発行元:Laser Institute of America
-
Observation of Keyhole Behavior and Melt Flows during Laser-Arc Hybrid Welding
NAITO Y., MIZUTANI M., and KATAYAMA S.
Proc. of ICALEO 2003 (CD) No. Section A - Welding p. No. 1005-No. 1005 2003年10月 研究論文(国際会議プロシーディングス)
-
Melting characteristics of metals by combined laser beams with different wavelengths
Moon, J.H., Mizutani, M., Katayama, S., Matsunawa, A.
Journal of Laser Applications Vol. 15 No. 1 p. 37-42 2003年8月 研究論文(学術雑誌)
-
Penetration Characterisitics and Plume Behavior in Laser-Arc Hybrid Welding
NAITO Y., MIZUTANI M., KATAYAMA S.
Trans. JWRI Vol. 32 No. 1 p. 71-74 2003年7月 研究論文(大学,研究機関等紀要)
出版者・発行元:JWRI, Osaka University
-
Elucidation of Laser Welding Phenomena and Porosity Formation Mechanism
KATAYAMA S., MIZUTANI M.
Trans. JWRI Vol. 32 No. 1 p. 67-69 2003年7月 研究論文(大学,研究機関等紀要)
出版者・発行元:JWRI, Osaka University
-
YAG Laser Lap Welding of Zn-Coated Steels and Monitoring of Reflected Beam
KATAYAMA S., TAKAYAMA M, MIZUTANI M., TARUI T., and MORI K.
IIW, Doc. No. IV-839-03. 2003年4月 研究論文(国際会議プロシーディングス)
-
Elucidation of Laser Lap Welding Phenomena of Zn-Coated Steels and Fundamental of Monitoring
KATAYAMA S., MIZUTANI M., TARUI T., and MORI K.
Proc of DIS (International Workshop on Designing of International Structures in Advanced Materials and Their Joints, CD-ROM. 2003年4月 研究論文(国際会議プロシーディングス)
-
Fundamentals and Industrial Evolution of Laser-Arc Hybrid Welding
KATAYAMA S., NAITO Y., and MIZUTANI M.
Proc. of the 6th Symposium of HiDEC p. 11-21 2003年4月 研究論文(国際会議プロシーディングス)
-
Keyhole Behavior and Pressure Distribution during Laser Irradiation on Molten Metal
MIZUTANI M., KATAYAMA S.
Proc. of ICALEO 2003 (CD) No. Section A - Welding, p. No. 1004-No. 1004 2003年4月 研究論文(国際会議プロシーディングス)
-
Laser One-Pass Welding of Aluminum Alloy Sheets Using Special Lap- and Butt-Joint of Dissimilar Aluminum and Steel
KATAYAMA S., MIZUTANI M.
Proc. of ICALEO 2003 (CD) No. Section E p. No. 1401-No. 1401 2003年4月 研究論文(国際会議プロシーディングス)
-
Investigation of floating body effects in PD-SOI-MOSFET using proton microprobe
Abo, S., Mizutani, M., Ikeda, K., Kinomura, A., Iwamatsu, T., Maegawa, S., Takai, M.
Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms Vol. 210 2003年 研究論文(学術雑誌)
-
Lap welding characteristics of thin sheet metals with combined laser beams of different wavelength
Moon, J., Katayama, S., Mizutani, M., Matsunawa, A.
Welding International Vol. 17 No. 6 2003年 研究論文(学術雑誌)
-
Porosity formation mechanism and its prevention in laser welding
Matsunawa, A., Mizutani, M., Katayama, S., Seto, N.
Welding International Vol. 17 No. 6 2003年 研究論文(学術雑誌)
-
Behaviour of laser induced plasma, keyhole and reflected light during laser welding with superimposed beams of different wavelengths
Moon, J., Katayama, S., Mizutani, M., Matsunawa, A.
Welding International Vol. 17 No. 7 2003年 研究論文(学術雑誌)
-
Behaviour of laser induced plasma, keyhole and reflected light during laser welding with superimposed beams of different wavelengths
Moon, J., Katayama, S., Mizutani, M., Matsunawa, A.
Welding Research Abroad Vol. 49 No. 11 2003年 研究論文(学術雑誌)
-
異波長重畳レーザによる各種金属材料の溶融特性
文 鍾賢, 水谷 正海, 片山 聖二, 松縄 朗
溶接学会論文集 Vol. 20 No. 4 p. 449-457 2002年11月 研究論文(学術雑誌)
出版者・発行元:社団法人 溶接学会
-
異波長重畳レーザにおけるレーザ誘起プラズマとキーホールおよび反射光挙動
文 鍾賢, 片山 聖二, 水谷 正海, 松縄 朗
溶接学会論文集 Vol. 20 No. 4 p. 458-467 2002年11月 研究論文(学術雑誌)
出版者・発行元:社団法人 溶接学会
-
異波長重畳レーザによる薄板重ね溶接特性
文 鍾賢, 片山 聖二, 水谷 正海, 松縄 朗
溶接学会論文集 Vol. 20 No. 4 p. 468-476 2002年11月 研究論文(学術雑誌)
出版者・発行元:社団法人 溶接学会
-
YAG Laser Spot Welding under Microgravity and Vacuum and Pulse-Shaping for Prevention of Porosity
M. MIZUTANI, K. TANAKA, S. KATAYAMA, A. MATSUNAWA
IIW Doc No. A-1 2002年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:IIW
-
On the Mechanism of Pore Formation during Keyhole Laser Spot Welding
KAPLAN A., MIZUTANI Masami, KATAYAMA Seiji, MATSUNAWA A.
Proc. of SPIE, High Power Laser Macroprocessing Vol. 4831 p. 186-191 2002年4月 研究論文(国際会議プロシーディングス)
-
Observation of Molten Metal Behavior during Laser Irradiation -Basic Experiment to Understand Laser Welding Phenomena
MIZUTANI Masami, KATAYAMA Seiji, MATSUNAWA Akira
Proc. of SPIE, High Power Laser Macroprocessing Vol. 4831 p. 208-213 2002年4月 研究論文(国際会議プロシーディングス)
-
Development of Porosity Prevention Procedures during Laser Welding
KATAYAMA Seiji, MIZUTANI Masami, MATSUNAWA Akira
Proc. of SPIE, High Power Laser Macroprocessing Vol. 4831 p. 281-288 2002年4月 研究論文(国際会議プロシーディングス)
-
Melting Characteristics and Energy Absorption in Metals Welded with Combined Laser Beams of Different Wavelengths
MOON J.-H., MIZUTANI M., KATAYAMA S., and MATSUNAWA A.
IIW, Doc. No. IV-816-02 / XII-1706-02. 2002年4月 研究論文(国際会議プロシーディングス)
-
レーザ溶接におけるポロシティ欠陥の発生機構及びその防止策
松縄 朗, 瀬渡 直樹, 水谷 正海, 片山 聖二
軽金属溶接 Vol. 40 No. 12 p. 736-743 2002年4月 研究論文(学術雑誌)
-
Unbounded Keyhole Collapse and Bubble Formation during Pulsed Laser Interaction with Liquid Zinc
Alexander F H KAPLAN, MIZUTANI Masami, KATAYAMA Seiji, and MATSUNAWA Akira
Journal of Applied Physics D: Applied Physics Vol. 35 p. 1218-1228 2002年4月 研究論文(学術雑誌)
出版者・発行元:Institute of Physics Publishing
-
Analysis of different methods for the prevention of pore formation in keyhole laser spot welding
Kaplan, A.F.H., Mizutani, M., Katayama, S., Matsunawa, A.
Welding in the World, Le Soudage Dans Le Monde Vol. 46 No. SPEC p. 1-12 2002年4月 研究論文(学術雑誌)
出版者・発行元:IIW
-
Keyhole Laser Spot Welding
Alexander F H KAPLAN, MIZUTANI Masami, KATAYAMA Seiji, and MATSUNAWA Akira
Proc. of ICALEO 2002, Laser Materials Processing Conference, Laser Welding Session 2002年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:Laser Institute of America
-
Laser Welding of Aluminium and Steel
KATAYAMA Seiji, MIZUTANI Masami, MATSUNAWA Akira
IIW Doc 2002年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:IIW
-
Lap welding characteristics of thin sheet metals with combined laser beams of different wavelengths
Moon, J., Katayama, S., Mizutani, M., Matsunawa, A.
Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society Vol. 20 No. 4 2002年 研究論文(学術雑誌)
-
Effect of vacuum on penetration and defects in laser welding
Katayama, S., Kobayashi, Y., Mizutani, M., Matsunawa, A.
Journal of Laser Applications Vol. 13 No. 5 p. 187-192 2001年12月 研究論文(学術雑誌)
出版者・発行元:Laser Institute of America
-
Observation of Keyhole and Molten Pool Behaviour in High Power Laser Welding : Mechanism of Porosity Formation and Its Suppression Method
SETO Naoki, KIM. Jong-Do, KATAYAMA Seiji, MIZUTANI Masami, MATSUNAWA Akira
Transactions of JWRI Vol. 30 No. 1 p. 13-27 2001年7月 研究論文(大学,研究機関等紀要)
出版者・発行元:大阪大学接合科学研究所
-
X-Ray Transmission In-Situ Observation of Fluid Flow inside Molten Pool during TIG Arc Welding of Stainless Steel
KATAYAMA Seiji, SETO Noki, MIZUTANI Masami, and MATSUNAWA Akira
Reviewed Proc. of the 3rd Int. Conf. (High Temperature Capillarity) p. 487-492 2001年7月 研究論文(国際会議プロシーディングス)
出版者・発行元:高温学会
-
Effect of Ambient Pressure on Keyhole and Pool Dynamics on Deep Penetration Welding
MATSUNAWA Akira, KOBAYASHI Yoshihiro, GOTO Michio, MIZUTANI Masami, and KATAYAMA Seiji
54th Ann. Ass. International Institute of Welding, p. Doc. IV-792-01-Doc. IV-792-01 2001年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:IIW
-
Melting Characteristics and Energy Absorption in Metals Welded with Combined Laser Beams of Different Wavelengths
MOON Jonghyun, MIZUTANI Masami, KATAYAMA Seiji, and MATSUNAWA Akira
Proc. of the 7th Int. Welding Symposium, JWS p. 497-502 2001年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:JWS
-
YAG Laser Spot Welding under Microgravity and Vacuum and Pulse-Shaping for Prevention of Porosity
MIZUTANI Masami, TANAKA koji, KATAYAMA Seiji, and MATSUNAWA Akira
Proc. of the 7th Int. Welding Symposium, JWS, pp. 573-578 p. 573-578 2001年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:JWS
-
レーザ溶接現象の解明
片山 聖二, 瀬渡 直樹, 水谷 正海, 松縄 朗
第52回レーザ熱加工研究会論文集 Vol. 52 p. 32-39 2001年4月 研究論文(研究会,シンポジウム資料等)
出版者・発行元:レーザ熱加工研究会
-
X-Ray Transmission In-Situ Observation of Keyhole during Laser Spot Welding and Pulse-Shaping for Prevention of Porosity
KATAYAMA Seiji, SETO Noki, MIZUTANI Masami, and MATSUNAWA Akira
Congress Proc. of ICALEO 2001 (Laser Materials Processing Conference), (2001), Session C: Welding, 804 (CD) p. 804-804 2001年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:Laser Institute of America
-
Liquid Flow inside Molten Pool during TIG Welding and Formation Mechanism of Bubble and Porosity
KATAYAMA Seiji, MIZUTANI Masami, MATSUNAWA Akira
Proc. of the 7th Int. Welding Symposium, JWS p. 125-130 2001年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:Japan Welding Soceity
-
Keyhole Dynamics and Porosity Formation during Laser Welding
KATAYAMA Seiji, SETO Naoki, MIZUTANI Masami, and MATSUNAWA Akira
Proc. of the 7th Int. Welding Symposium, JWS p. 555-560 2001年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:(社)溶接学会
-
Suppression of floating body effects in SOI-MOSFET studied using nuclear microprobes
Abo, S., Mizutani, M., Nakayama, K., Takaoka, T., Iwamatsu, T., Yamaguchi, Y., Maegawa, S., Nishimura, T., Kinomura, A., Horino, Y., Takai, M.
Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms Vol. 181 No. 1-4 2001年 研究論文(学術雑誌)
-
Dynamics of Keyhole and Molten Pool in High Power CO2 Laser Welding
MATSUNAWA A.
Proceedings of SPIE Vol. 3888 p. 34-45 2000年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:
-
Relationship between Plasma and Keyhole Behavior during CO2 Laser Welding
SETO Naoki, KATAYAMA Seiji, MIZUTANI Masami, and MATSUNAWA Akira
Proceedings of SPIE (The International Society for Optical Engineering) Vol. 3888 p. 61-68 2000年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:SPIE (The International Society for Optical Engineering)
-
Pulsed YAG Laser Spot Welding under Microgravity
KATAYAMA Seiji, TANAKA Kouji, MIZUTANI Masami, and MATSUNAWA Akira
Proceedings of SPIE (The International Society for Optical Engineering) Vol. 3888 p. 96-103 2000年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:SPIE (The International Society for Optical Engineering)
-
Pulsed YAG Laser Spot Welding under Microgravity and Vacuum
KATAYAMA Seiji, TANAKA Kouji, MIZUTANI Masami, and MATSUNAWA Akira
Proceedings of ICALEO'99 (International Congress on Application of Lasers and Electro-Optics) -Laser Materials Processing- Vol. 87 No. Section D p. 157-166 2000年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:Laser Institute of Ameraica
-
Formation Mechanism of Porosity in High Power YAG Laser Welding
KATAYAMA Seiji, SETO Noki, MIZUTANI Masami, MATSUNAWA Akira
Proceedings of ICALEO 2000 Vol. 89 No. Section C p. 16-25 2000年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:Laser Institute of Ameraica
-
Effect of Vacuum on Penetration and Defects in Laser Welding
KATAYAMA S.
Proc. of ICALEO 2000 Vol. 89 No. Section C p. 182-191 2000年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:
-
Melting Characteristics of Metals by Combined Laser Beams with Different Wavelength
MOON J. H.
Proc. of ICALEO 2000 Vol. 89 No. Section E p. 143-152 2000年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:
-
Generation Mechanisms of Imperfections in High Power Laser Welding
MATSUNAWA Akira, KATAYAMA Seiji, SETO Naoki, and MIZUTANI Masami
Proc. of IIW Asian Pacific International Congress p. Paper No. 50-Paper No. 50 2000年4月 研究論文(国際会議プロシーディングス)
-
Liquid Motion in Keyhole Laser Welding
MATSUNAWA Akira, SETO Noki, MIZUTANI Masami, and KATAYAMA Seiji
Proceedings of ICALEO'98 Vol. 85 No. Sec.G p. 151-160 1999年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:Laser Institute of Ameraica
-
X-ray observation of keyhole dynamics in high power laser welding
MATSUNAWA A.
Proc. of IWC'99 Vol. 1 p. 46-53 1999年4月 研究論文(国際会議プロシーディングス)
-
Elucidation of Laser Welding Phenomena and Porosity Formation Mechanism
MATSUNAWA Akira, SETO Noki, MIZUTANI Masami, and KATAYAMA Seiji
Proceedings of ISAPS '99 (The Second International Symposium on Applied Plasma Science -Advances in Applied Plasma Science-) p. 409-416 1999年4月 研究論文(国際会議プロシーディングス)
-
Dynamics of Keyhole and Molten Pool in Laser Welding
MATSUNAWA Akira, KIM Jong-Do, SETO Noki, MIZUTANI Masami, and KATAYAMA Seiji
International Institute of Welding (IIW), Lisbon, (1999) Vol. Doc. IV No. 751-99 p. 1-9 1999年4月 研究論文(国際会議プロシーディングス)
-
Effect of Shielding Gas on Porosity Formation in High Power CO2 Laser Welding
KATAYAMA Seiji, SETO Naoki, MIZUTANI Masami, and MATSUNAWA Akira
IIW. Vol. Doc. IV No. 753-99 p. 1-6 1999年4月 研究論文(国際会議プロシーディングス)
-
Interaction between Plasma and Laser Beam, and Its Effect on Keyhole Dynamics in High Power CO2 Laser Welding
KATAYAMA Seiji, SETO Naoki, MIZUTANI Masami, and MATSUNAWA Akira
IIW Annual Assembly, IIW Doc. IV-765-2000/SG212-976-00 p. 1-12 1999年4月 研究論文(国際会議プロシーディングス)
-
Dynamics of keyhole and molten pool in laser welding
Matsunawa, A., Kim, J.-D., Seto, N., Mizutani, M., Katayama, S.
Journal of Laser Applications Vol. 10 No. 6 p. 247-254 1998年12月 研究論文(学術雑誌)
出版者・発行元:Laser Institute of Ameraica
-
Porosity Formation and Solidification Cracking in Laser Welding
MATSUNAWA Akira, KIM Jong-Do, SETO Noki, MIZUTANI Masami, and KATAYAMA Seiji
Proceedings of the Taiwan International Welding Conference '98 p. 47-57 1998年4月 研究論文(国際会議プロシーディングス)
-
X線透過法によるレーザ溶接時のキーホール現象とポロシティ生成挙動の観察
瀬渡 直樹, 金 鍾道, 水谷 正海, 片山 聖二, 松縄 朗
第44回レーザ熱加工研究会論文集 Vol. 44 p. 7-13 1998年4月 研究論文(研究会,シンポジウム資料等)
出版者・発行元:レーザ熱加工研究会
-
アルミニウム合金A5182レーザ溶接部の疲労特性
水谷 正海, 山口 康啓, 片山 聖二, 松縄 朗
第43回レーザ熱加工研究会論文集 Vol. 43 p. 1-9 1998年4月 研究論文(研究会,シンポジウム資料等)
-
ウェッティングバランス法による表面張力の測定方法
宮崎 誠, 水谷 正海, 竹本 正, 松縄 朗
溶接学会論文集 Vol. 15 No. 4 p. 681-687 1997年11月 研究論文(学術雑誌)
出版者・発行元:JAPAN WELDING SOCIETY
-
円柱周囲に形成されるメニスカス形状の解析
宮崎 誠, 水谷 正海, 竹本 正, 松縄 朗
溶接学会論文集 Vol. 15 No. 4 p. 674-680 1997年11月 研究論文(学術雑誌)
-
Effect of Porosity on Mechanical Properties of CO2 Laser Welded Aluminium Alloys
KATAYAMA Seiji, YAMAGUCHI Yasuhiro, MIZUTANI Masami, and MATSUNAWA Akira
IIW (International Institute of Welding) Commission Document, Com. IV, Doc. No. IV-682-97 1997年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:IIW
-
Evaluation of Mechanical Properties of Laser-Welded Aluminum Alloy
KATAYAMA Seiji, YAMAGUCHI Yasuhiro, MIZUTANI Masami, and MATSUNAWA Akira
Proceedings of ICALEO'97 Vol. 83 No. Part 2, Section G p. 93-102 1997年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:Laser Institute of Ameraica
-
Modelling of melting and solidification behaviour during laser spot welding
Katayama, S., Mizutani, M., Matsunawa, A.
Science and Technology of Welding and Joining Vol. 2 No. 1 p. 1-9 1997年1月 研究論文(学術雑誌)
-
レーザー溶接における蒸発・凝縮粒子の構造とプルームの組成
金 鐘道, 片山 聖二, 水谷 正海, 竹本 正, 松縄 朗
レーザー研究 Vol. 24 No. 9 p. 996-1005 1996年9月 研究論文(学術雑誌)
出版者・発行元:(社)レーザー学会
-
マイクロソルダリングにおけるメニスカス形状に及ぼす各種要因の影響のシミュレーション
宮崎 誠, 水谷 正海, 竹本 正, 松縄 朗
第二回エレクトロニクスにおけるマイクロ接合・ 実装技術シンポジウム論文集 Vol. 2 p. 79-84 1996年4月 研究論文(研究会,シンポジウム資料等)
-
Mathematical Modeling of Fusion and Solidification in Laser Welding and Evaluation of Hot Cracking Susceptibility
MATSUNAWA Akira, MIZUTANI Masami, and KATAYAMA Seiji
Transactions of JWRI Vol. 25 No. 2 p. 161-169 1996年4月 研究論文(大学,研究機関等紀要)
出版者・発行元:大阪大学接合科学研究所
-
Vacuum Brazing Tests on Powder Aluminum Brazing Filler Metals
T.TAKEMOTO, M.MIZUTANI, T.UJIE, A.TANAKA, A.MATSUNAWA
Trans. JWRI Vol. 24 No. 2 p. 57-64 1995年4月 研究論文(大学,研究機関等紀要)
-
アルミニウムのマイクロソルダリングへの適用性に及ぼす合金元素の影響
竹本 正, 水谷 正海, 松縄 朗
軽金属 Vol. 45 No. 9 p. 491-496 1995年4月 研究論文(国際会議プロシーディングス)
-
Effect of alloying elements on applicability of aluminum for micro-soldering
Takemoto, T., Mizutani, M., Matsunawa, A.
Journal of Japan Institute of Light Metals Vol. 45 No. 9 1995年 研究論文(学術雑誌)
-
Effect of Flux Composition on Wettability in Soldering of Aluminum
T.TAKEMOTO, M.MIZUTANI, I.OKAMOTO, A.MATSUNAWA
Trans. JWRI Vol. 23 No. 2 p. 197-203 1994年4月 研究論文(大学,研究機関等紀要)
-
アルミニウム合金粉末ろうの真空ろう付性
竹本 正, 水谷 正海, 岡本 郁男, 氏江 達之, 田中 昭衛
軽金属 Vol. 44 No. 6 p. 353-358 1994年
出版者・発行元:一般社団法人 軽金属学会
-
Fusion and Solidification Characteristics in Pulse-Shaped YAG Laser Welding
A. Matsunawa, S. Katayama, M. Mizutani, H. Ikeda, K. Nishizawa
Proc. of 5th CISFFEL Vol. 1 p. 219-226 1993年4月 研究論文(国際会議プロシーディングス)
-
パルスレーザ溶接の凝固モデル
片山 聖二, 水谷 正海, 松縄 朗
第29回レーザ熱加工研究会論文集 Vol. 29 p. 179-190 1993年4月 研究論文(研究会,シンポジウム資料等)
出版者・発行元:レーザ熱加工研究会
-
Pulse Shape Optimization for Defect Prevention in Pulsed Laser Welding of Stainless Steels
KATAYAMA Seiji, KOHSAKA Shuichi, MIZUTANI Masami, NISHIZAWA Keiji, MATSUNAWA Akira
Proc. of ICALEO '93 Vol. 77 p. 487-497 1993年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:Laser Institute of Ameraica
-
Effect of Pulse Shaping on Defect Reduction in Pulsed Laser Welding
S. Katayama, M. Mizutani, H. Ikeda, K. Nishizawa, A. Matsunawa
Proc. of ICALEO '92 p. 547-556 1992年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:Laser Institute of Ameraica
-
Laser Rapid Solidification Microstructure and Microsegregation of Aluminum Alloy Single Crystals
KATAYAMA Seiji, MIZUTANI Masami, SIMIDZU H., MATSUNAWA Akira
Proc. of LAMP '92 Vol. 1 p. 361-366 1992年4月 研究論文(国際会議プロシーディングス)
-
Microstructural Characteristics of Laser-Rapidly Solidified Aluminum Alloys of Single Crystals
S. Katayama, M. Mizutani, H. Simidzu, A. Matsunawa
Proc. of ICALEO '91 Vol. 74 p. 352-362 1991年4月 研究論文(国際会議プロシーディングス)
出版者・発行元:Laser Institute of Ameraica
-
アルミニウム管と平板のろう付におけるフィレット形成に及ぼす管径の影響
竹本 正, 水谷 正海, 岡本 郁男, 我孫子 哲男, 岩崎 省介
軽金属 Vol. 40 No. 5 p. 344-350 1990年4月 研究論文(学術雑誌)
出版者・発行元:一般社団法人 軽金属学会
-
過剰電流密度で形成したニッケルめっきのはんだ付性
新井 進, 竹本 正, 水谷 正海, 征矢 隆
Advanced Technol. in Weld., Materials Process. And Evaluation (5th Intnl. Symp. of Japan Weld. Soc.) 1990年4月 研究論文(学術雑誌)
-
アルミニウム中空容器の真空ろう付性に及ぼす密閉度の影響
水谷 正海, 岡本 郁男
軽金属 Vol. 36 No. 6 p. 345-352 1986年4月 研究論文(学術雑誌)
出版者・発行元:The Japan Institute of Light Metals
-
Physical Meaning of Wetting Curve Traced by Meniscograph Wettability Tester (Report II) : Kinetic Consideration of Flux Action in Soldering(Welding Physics, Process & Instrument)
MIZUTANI Masami, MORI Ikuo, OKAMOTO Ikuo, TAKEMOTO Tadashi
Transactions of JWRI Vol. 14 No. 2 p. 201-207 1985年4月 研究論文(大学,研究機関等紀要)
出版者・発行元:大阪大学溶接工学研究所
-
PHYSICAL MEANING OF WETTING CURVE TRACED BY MENISCOGRAPH WETTABILITY TESTER.
Okamoto, Ikuo, Takemoto, Tadashi, Mizutani, Masami, Mori, Ikuo
Transactions of JWRI (Japanese Welding Research Institute) Vol. 14 No. 1 p. 21-27 1985年4月 研究論文(学術雑誌)