JA

Profile

Research

Social

Other

Kondou Katsuyoshi

近藤　勝義

Joining and Welding Research Institute, Professor

kondoh.katsuyoshi.jwri osaka-u.ac.jp

Research History

  • 2011 - 2014, Osaka University, Joining and Welding Research Institute

Research Areas

  • Manufacturing technology (mechanical, electrical/electronic, chemical engineering), Machine materials and mechanics
  • Nanotechnology/Materials, Material fabrication and microstructure control
  • Humanities & social sciences, Museology
  • Humanities & social sciences, Cultural properties

Papers

  • Insights into the microstructural design of high-performance Ti alloys for laser powder bed fusion by tailoring columnar prior-β grains and α-Ti morphology, S.X. Wang,S.F. Li,X.M. Gan,R.D.K. Misra,R. Zheng,K. Kondoh,Y.F. Yang, Journal of Materials Science & Technology, Vol. 187, p. 156-168, 2024/07
  • Cost Effective In-Situ Alloying of Ti-Fe via Laser Powder Bed Fusion, J. Huang,A. Issariyapat,S. Kariya,J. Umeda,K. Kondoh, International Journal of Powder Metallurgy, Vol. 59, No. 4, 2024/06
  • Use of X-ray CT Imaging to Quantitatively Analyze the Effects of the Pore Morphology on the Tensile Properties of CP-Ti L-PBF Materials, Yuji SHIGETA,Naoyuki NOMURA,Katsuyoshi KONDOH,Kentaro UESUGI,Masato HOSHINO,Masatoshi ARAMAKI,Yukiko OZAKI, ISIJ International, Vol. 64, No. 7, p. 1-10, 2024/05
  • Evolution of interfacial phases between Al alloy and high entropy alloy during annealing, Haining Yao,Hongyuan Wen,Gaohui Li,Nannan Chen,Ke Chen,Katsuyoshi Kondoh,Xianping Dong,Huiying Zhu,Min Wang, Materials Characterization, Vol. 211, 2024/04
  • Synthesis mechanism of pelleted heterostructure Ti64-TiB composites via an interdiffusion and self-organization strategy based on powder metallurgy, Lei Liu,Shufeng Li,Xin Zhang,Shaolong Li,Shaodi Wang,Bo Li,Lina Gao,Huiying Liu,Dongxu Hui,Deng Pan,Shota Kariya,Junko Umeda,Katsuyoshi Kondoh, Composites Part B, Vol. 276, 2024/03
  • Effect of Laser Scanning Speed and Fine Shot Peening on Pore Characteristics, Hardness, and Residual Stress of Ti-6Al-4V Fabricated by Laser Powder Bed Fusion, Kanawat Ratanapongpien,ANAK KHANTACHAWANA,Katsuyoshi Kondoh, Metals, Vol. 14, No. 2, 2024/02/19
  • Microstructures Formation and Strengthening Mechanism of Ultra-Rapidly Solidified Powder Metallurgy Ti-Si Alloys via Hot Rolling Process, Shota KARIYA,Yuudai HAYASHI,Ammarueda ISSARIYAPAT,Junko UMEDA,Seung-Ki MOON,Biao CHEN,Shufeng LI,Katsuyoshi KONDOH, Journal of the Japan Society of Powder and Powder Metallurgy, 2024/02
  • Strengthening Mechanism of Ti-Zr Sintered Alloys with Sc Addition, Shota KARIYA,Kouki NAGATA,Junko UMEDA,Biao CHEN,Jianghua SHEN,Shufeng LI,Katsuyoshi KONDOH, Journal of the Japan Society of Powder and Powder Metallurgy, 2024/02
  • Microstructure and Strengthening Mechanism of Powder Metallurgy Extruded Titanium Alloys with Carbon Solid Solution, Shota Kariya,Eri ICHIKAWA,Takuma TERAMAE,Shufeng LI,Xiaochun LI,Katsuyoshi KONDOH,Junko Umeda, Journal of the Japan Society of Powder and Powder Metallurgy, 2024/02
  • Mechanical and tribological property of Cu/CrB2 composites under dry sliding condition, Xin Feng Guo,Lei Jia,Zhen Lin Lu,Hui Xie,Katsuyoshi Kondoh, Materials Science and Technology, Vol. 0, 2024/01
  • CNT-induced heterogeneous matrix grain structure in CNTs/Al composites, Jie Wan,Biao Chen,Xinyi Zhou,Lin Cao,Huarui Geng,Jianghua Shen,Abdollah Bahador,Katsuyoshi Kondoh,Jinshan Li, Carbon, Vol. 216, 2024/01
  • Assessing the thermal stability of laser powder bed fused AlSi10Mg by short-period thermal exposure, Jie Wan,Huarui Geng,Biao Chen,Jianghua Shen,Katsuyoshi Kondoh,Jinshan Li, Virtual and Physical Prototyping, Vol. 18, No. 1, 2023/12/31
  • Novel tensile deformation mode in laser powder bed fusion prepared Ti-O alloy, Shota Kariya,Ammarueda Issariyapat,Abdollah Bahador,Junko Umeda,Jianghua Shen,Kenta Yamanaka,Akihiko Chiba,Katsuyoshi Kondoh, Materials Science & Engineering A, Vol. 892, 2023/12
  • Enhanced combination of strength and electrical conductivity properties with CrB2 reinforced Cu matrix composites fabricated by powder metallurgy, Xin feng Guo,Lei Jia,Zhen lin Lu,Hui Xie,Katsuyoshi Kondoh, Materials Today Communications, Vol. 38, 2023/12
  • Influence of thermo-mechanical processing on microstructure and properties of bulk metallic glassy alloys-reinforced Al matrix composites prepared by powder metallurgy, Shimaa Abolkassem,Ayman Elsayed,Shota Kariya,Junko Umeda,Katsuyoshi Kondoh, Journal of Materials Research and Technology, Vol. 27, p. 8197-8208, 2023/11
  • First-principles study and its experimental verification on the strength and ductility of O/Si solid solution strengthened Ti alloys, Ming-hao Hou,Lei Jia,Zhen-lin Lu,Biao Chen,Katsuyoshi Kondoh,Jie Cui, Journal of Materials Research and Technology, Vol. 27, p. 7778-7786, 2023/11
  • Microstructure and mechanical properties of hybrid nano-titanium carbide-carbon nanotubes (nano-TiC-CNT) reinforced aluminium matrix composite, Peter Nyanora,Hossam M. Yehiab,Abdollah Bahadorc,Junko Umeda,Katsuyoshi Kondoh,Mohsen A. Hassand, Advanced Composite Materials, 2023/10
  • Role of W in W-coated Cu powder in enhancing the densification-conductivity synergy of laser powder bed fusion built Cu component, R. Zheng,S.F. Li,R.D.K. Misra,K. Kondoh,Y.F. Yang, Journal of Materials Processing Tech., Vol. 322, 2023/10
  • Mechanical Functionalization of Additively Manufactured Titanium with Light Elements, Katsuyoshi KONDOH,Eri ICHIKAWA,Ammarueda ISSARIYAPAT,Junko UMEDA, Journal of the Japan Society of Powder and Powder Metallurgy, 2023/09
  • Microstructure and mechanical properties of powder metallurgy Ti-TiBw-xFe titanium matrix composites using Ti-TiBw composite powder, Shaodi Wang,Shufeng Li,Lei Liu,Shaolong Li,Lina Gao,Huiying Liu,Xin Zhang,Bo Li,Biao Chen,Junko Umeda,Katsuyoshi Kondoh,Shengyin Zhou, Journal of Materials Science, Vol. 58, p. 13662-13667, 2023/09
  • The mechanical and microstructural behavior of heat treated, texture-controlled Ti-10%Mo alloys manufactured by laser powder bed fusion, Jack Peterson,Ammarueda Issariyapat,Shota Kariya,Junko Umeda,Katsuyoshi Kondoh, Materials Science & Engineering A, Vol. 884, 2023/08
  • Excellent tensile yield strength with ultrafine grain and tailored microstructure in plastically deformed Ti-Re alloys, Abdollah Bahador,Astuty Amrin,Shota Kariya,Ammarueda Issariyapat,Ozkan Gokcekaya,Guohua Zhao,Junko Umeda,Yafeng Yang,Ma Qian,Katsuyoshi Kondoh, Journal of Alloys and Compounds, Vol. 967, 2023/07
  • Simultaneous improvement on strength and conductivity of CrB2/Cu composites by inhomogeneous design, Xin-feng Guo,Lei Jia,Zhen-lin Lu,Hui Xie,Katsuyoshi Kondoh, Materials Letters, Vol. 349, 2023/07
  • Loss-free tensile ductility of dual-structure titanium composites via an interdiffusion and self-organization strategy, Lei Liu,Shufeng Li,Deng Pan,Dongxu Hui,Xin Zhang,Bo Li,Tianshou Liang,Pengpeng Shi,Abdollah Bahador,Junko Umeda,Katsuyoshi Kondoh,Lina Gao,Zhimao Wang,Gang Li,Shuyan Zhang,Ruihong Wang,Wenge Chen, PNAS, Vol. 120, No. 28, 2023/07
  • Microstructure refinement and strengthening mechanisms of additively manufactured Ti-Zr alloys prepared from pre-mixed feedstock, Ammarueda Issariyapat,Jeff Huang,Takuma Teramae,Shota Kariya,Abdollah Bahador,Patama Visuttipitukul,Junko Umeda,Abdulaziz Alhazaa,Katsuyoshi Kondoh, Additive Manufacturing, Vol. 73, 2023/07
  • Experimentally mapping the oriented-to-misoriented transition in laser powder bed fusion Ti-10%Mo alloys, Jack Peterson,Shota Kariya,Ammarueda Issariyapat,Junko Umeda,Katsuyoshi Kondoh, Scripta Materialia, Vol. 231, 2023/07
  • Simultaneously enhancing strength and ductility of selective laser melted AlSi10Mg via introducing in-cell Al4C3 nanorods, Jie Wan,Kangan Li,Huarui Geng,Biao Chen,Jianghua Shen,Yazhou Guo,Katsuyoshi Kondoh,Abdollah Bahador,Jinshan Li, Materials Research Letters, Vol. 11, No. 6, p. 422-429, 2023/06/03
  • Laser powder bed fusion of electrically/thermally conductive component by developing inert Cr2O3-coated Cu powder, Run Zheng,Shaofu Li,R.D.K. Misra,Katsuyoshi Kondoh,Yafeng Yang, Additive Manufacturing, Vol. 72, 2023/06
  • Controlling Intermetallic Compound Distribution in Additively Manufactured Ti-Cu Alloys by Heat Treatment, Hiroki HANADA,Shota KARIYA,Kazuki SHITARA,Junko UMEDA,Katsuyoshi KONDOH, Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 70, No. 6, p. 290-297, 2023/06
  • Support recycling in additive manufacturing: A case study for enhanced wear performance of Ti6Al4V alloy, Ridvan Yamanoglu,Abdollah Bahador,Katsuyoshi Kondoh, Journal of Engineering Tribology, 2023/05
  • Characterization of Ti4Al4Mo/SiC composite produced by pressure-assisted sintering, R. YAMANOGLU1,A. BAHADOR,K. KONDOH,C. DURAN1,Y. AKYILDIZ,Y. OZDEMIR,O. OZTURK, Bulletin of Materials Science, Vol. 46, 2023/05
  • Effect of grain size on the tensile ductility and fracture mechanism of Ti–O alloys, Shota Kariya,Ammarueda Issariyapat,Abdollah Bahador,Junko Umeda,Jianghua Shen,Katsuyoshi Kondoh, Materials Science and Engineering: A, Vol. 874, 2023/05
  • Achieving synergy of mechanical isotropy and tensile properties by constructing equiaxed microstructure in as-printed Ti alloys, S.X. Wang,S.F. Li,X.M. Gan,R. Zheng,D. Ye,R.D.K. Misra,K. Kondoh,Y.F. Yang, Scripta Materialia, Vol. 229, 2023/05
  • Phase transformation induced twinning in commercially pure titanium: An in-situ study, Siyu Lu,Shenglu Lu,Biao Chen,Ma Qian,Qiuming Wei,Katsuyoshi Kondoh,Jianghua Shen, Scripta Materialia, Vol. 229, 2023/05
  • Precision control of oxygen content in CP-Ti for ultra-high strength through titanium oxide decomposition: An in-situ study, Xianzhe Shi,Xiuxia Wang,Biao Chen,Junko Umeda,Abdollah Bahador,Katsuyoshi Kondoh,Jianghua Shen, Materials & Design, Vol. 227, 2023/03
  • An in-situ study of static recrystallization in Mg using high temperature EBSD, Xu Ye,Zhe Suo,Zhonghao Heng,Biao Chen,Qiuming Wei,Junko Umeda,Katsuyoshi Kondoh,Jianghua Shen, Journal of Magnesium and Alloys, 2023/02
  • Superior tensile properties of graphene/Al composites assisted by in-situ alumina nanoparticles, Jie Wan,Jinglun Yang,Xinyi Zhou,Biao Chen,Jianghua Shen,Katsuyoshi Kondoh,Jinshan Li, Carbon, Vol. 204, p. 447-455, 2023/02
  • Overview of the JWRI Coupling Internship and its expansion, and a prospect of “JWRI HUST-OU” in Vietnam, KATSUMATA Mihoko,KONDOH Katsuyoshi,NISHIKAWA Hiroshi,TANAKA Manabu, JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 92, No. 1, p. 42-48, 2023/01
  • Effect of Bimodal Grain Structure on the Yielding Behavior of Commercial Purity Titanium Under Quasi-static Tension, Xianzhe Shi,Xiuxia Wang,Biao Chen,Junko Umeda,Katsuyoshi Kondoh,Jianghua Shen, Metals and Materials International, Vol. 229, p. 2207-2215, 2023/01
  • Rose bengal-decorated rice husk-derived silica nanoparticles enhanced singlet oxygen generation for antimicrobial photodynamic inactivation, Nanase Mori,Hideya Kawasaki,Erika Nishida,Yukimi Kanemoto,Hirofumi Miyaji,Junko Umeda,Katsuyoshi Kondoh, Journal of Materials Science, 2023/01
  • Evading ductility deterioration in aluminum matrix composites via intragranulation of nano-reinforcement by reactive selective laser melting, Jie Wan,Huarui Geng,Biao Chen,Jianghua Shen,Katsuyoshi Kondoh,Jinshan Li, Materials Science and Engineering: A, Vol. 863, 2023/01
  • Investigation of Microstructure, Residual Stress, and Hardness of Ti-6Al-4V after Plasma Nitriding Process with Different Times and Temperatures, Goratouch Ongtrakulkij,Julathep Kajornchaiyakul,Katsuyoshi Kondoh,Anak Khantachawana, Coatings, Vol. 12, No. 12, 2022/12/08
  • Effect of Oxygen on Microstructure Formation on L-PBFed Ti Alloy, Bulletin of The Iron and Steel Institute of Japan (Ferrum), Vol. 27, No. 12, p. 906-912, 2022/12
  • Additive Manufacturing Materials as Powder Metallurgy Materials, An Approach for Prediction of Mechanical Properties by Quantification of Microstructures, Bulletin of The Iron and Steel Institute of Japan (Ferrum), Vol. 27, No. 12, p. 825-835, 2022/12
  • Matrix effect on strengthening behavior of carbon nanotubes in aluminum matrix composites, H. Geng,B. Chen,J. Wan,J. Shen,K. Kondoh,J. S. Li, Materials Characterization, Vol. 195, 2022/11
  • Friction stir lap welding of AZ31 and TC4: Mechanical properties and bonding mechanism, Xuebir Zhuo,Haining Yao,Ke Chen,Katsuyoshi Kondoh,Min Wang,Xueming Hua,Aidang Shan, Materials Characterization, Vol. 195, 2022/11
  • Elimination of η phase in WC-Co cemented carbides during laser powder bed fusion by powder coating compensation strategy, Yemin Wang,Lei Zhang,Yafeng Yang,Katsuyoshi Kondoh,Linbing Sun,Yanan Lu, Journal of the American Ceramic Society, Vol. 106, No. 3, p. 1681-1693, 2022/11
  • Microstructure and mechanical properties of friction stir lap welds between FeCoCrNiMn high entropy alloy and 6061 Al alloy, Raining Yao,Ke Chen,Katsuyoshi Kondoh,Xianping Dong,Min Wang,Xueming Hua,Aidang Shan, Materials & Design, Vol. 224, 2022/11
  • Advanced Coating Process of Un-bundled Carbon Nanotubes on Titanium Plate to Improve Tribological Property and Biocompatibility, Junko UMEDA,Hirofumi MIYAJI,Bunshi FUGETSU,Seung Ki MOON,Anak KHANTACHAWANA,Shota KARIYA,Katsuyoshi KONDOH, 2022/11
  • Advanced Powder Metallurgy Process for High-strengthened Titanium Materials Using Ubiquitous Solid Solutes, Katsuyoshi Kondoh,Shota Kariya,Ammarueda Issariyapat,Shufeng Li,Junko Umeda, 2022/11
  • Effect of Nb Content and water quenching on microstructure and mechanical properties of Ti-Nb alloys fabricated by spark plasma sintering, Nattawood Suesawadwanid,Anak Khantachawana,Kasama Srirussamee,Katsuyoshi Kondoh, Powder Metallurgy, 2022/10/20
  • Tribological Behavior of Titanium-Sintered Composites with Ring-Shaped TiN Dispersoids, Junko Umeda,Hiroko Fujii,Ryota Takizawa,Takuma Teramae,Ammarueda Issariyapat,Shota Kariya,Yafeng Yang,Shufeng Li,Katsuyoshi Kondoh, Lubricants, Vol. 10, 2022/10/12
  • High Strength Ti-Zr Alloys With Balanced Ductility Fabricated By Powder Metallurgy And Additive Manufacturing Routes, K. Kondoh,A. Issariyapat,S. Kariya,S. Li,A. Alhazaa,J. Umeda, 2022/10
  • Printability enhancement and mechanical property improvement via in situ synthesis of carbon nanotubes on aluminium powder, Jingyi Cui,Shaofu Li,R.D.K. Misra,Kang Geng,Katsuyoshi Kondoh,Guanfeng Li,Yafeng Yang, Powder Technology, Vol. 413, 2022/10
  • Sintering-free fabrication of high-strength titanium matrix composites reinforced with carbon nanotubes, K.Y. Liu,J.S. Li,J. Wan,Q. Yan,K. Kondoh,J. Shen,S. Li,B. Chen, Carbon, Vol. 197, p. 412-424, 2022/09
  • Room temperature and high-temperature properties of extruded Ti-4Fe-3W/2TiC composites in α+β and β phases, Abdollah Bahador,Ayhan Yurtsever,Astuty Amrin,Shota Kariya,Junko Umeda,Jianghua Shen,Biao Chen,Takeshi Fukuma,Katsuyoshi Kondoh, Materials & Design, Vol. 220, 2022/08
  • Simulation on the Direct Powder Rolling Process of Cu Powder by Drucker–Prager/Cap Model and Its Experimental Verification, Chen Zhang,Lei Jia,Hui Xie,Ruifeng Niu,Zhenlin Lu,Katsuyoshi Kondoh, Metals, Vol. 12, 2022/07/05
  • A thermal activation based constitutive model for the dynamic deformation of AA5083 processed by large-scale equal-channel angular pressing, Yunfei WANG,Minjie WANG,Biao CHEN,Huijie SUN,Katsuyoshi KONDOH,Laszlo J. KECSKES,Jianghua SHEN, Chinese Journal of Aeronautics, 2022/07
  • Investigation of Ti-Zr-Fe-N-H system properties for marine applications, A. Degnah,H. F. Alnaser,El-Sayed M. Sherif,I. Alhoweml,K. Kondoh,A. Alhazaa, Materials Today Communications, Vol. 32, 2022/07
  • The Effects of Heat Treatment and Carbon Content on the Mirostructure and Mechnical Properties of Laser Powder Bed Fision Ti-6Al-4V with Dissolved TiC Particles, Jack Peterson,Ammarueda Issariyapat,Junko Umeda,Katsuyoshi Kondoh, Journal of Alloys and Compounds, Vol. 920, 2022/06
  • Solute-induced near-isotropic performance of laser powder bed fusion manufactured pure titanium, Ammarueda Issariyapat,Shota Kariya,Kazuki Shitara,Junko Umeda,Katsuyoshi Kondoh, Additive Manufacturing, Vol. 56, 2022/05
  • Microstructure and mechanical characterizations of additively manufactured high oxygen-doped titanium, Wendi Shi,Yahui Yang,Nan Kang,Minjie Wang,Biao Chen,Yulong Li,Umeda Junko,Katsuyoshi Kondoh,Jianghua Shen, Materials Characterization, Vol. 189, 2022/05
  • First-principles design and experimental validation of β-Ti alloys with high solid-solution strengthening and low elasticities, Kazuki Shitara,Katsuya Yokota,Masato Yoshiya,Junko Umeda,Katsuyoshi Kondoh, Materials Science and Engineering: A, Vol. 843, 2022/05
  • Ductility improvement of high-strength Ti–O material upon heteromicrostructure formation, Shota Kariya,Ammarueda Issariyapat,Abdollah Bahador,Junko Umeda,Jianghua Shen,Katsuyoshi Kondoh, Materials Science and Engineering: A, Vol. 842, 2022/05
  • Superior high-temperature tensile properties of aluminum matrix composites reinforced with carbon nanotubes, L. Cao,B. Chen,J. Wan,K. Kondoh,B. Guo,J. Shen,J.S. Li, Carbon, Vol. 191, p. 403-414, 2022/05
  • Investigation into the Intermetallic Layers in Ti/Al Multi-Layer Composites Produced via Accumulative Rolling and Sintering, Yahui Yang,Jianghua Shen,Junko Umeda,Katsuyoshi Kondoh,Yulong Li, Science of Advanced Materials, Vol. 14, p. 1-6, 2022/04
  • Laser powder bed fusion of cemented carbides by developing a new type of Co coated WC composite powder, Lei Zhang,Chaoquan Hu,Yafeng Yang,R. D. K. Misra,Katsuyoshi Kondoh,Yanan Lu, Additive Manufacturing, Vol. 55, 2022/04
  • Local galvanic corrosion analysis on cast Mg-Ca binary alloy using scanning Kelvin probe force microscopy, Katsuyoshi Kondoh,Rei Takei,Shota Kariya,Shufeng Li,Junko Umeda, Materials Letters, Vol. 319, 2022/04
  • 大阪大学カップリング・インターンシップにおける成果プロセス（プログラムの質的向上を目指して）, 寺西 未沙,勝又 美穂子,西川 宏,近藤 勝義,田中 学, グローバル人材育成教育研究, Vol. 9, No. 2, p. 95-108, 2022/03
  • 大阪大学カップリング・インターンシップ実施中の「参加者の認識の変化調査」に関する結果と考察（プログラム活動の認識変化への影響とは）, 勝又 美穂子,橋本 智恵,西川 宏,近藤 勝義, グローバル人材育成教育研究, Vol. 9, No. 2, p. 51-60, 2022/03
  • Enhanced densification of copper during laser powder bed fusion through powder surface alloying, Run Zheng,Jingyi Cui,Yafeng Yang,Shaofu Li,R. D. K. Misra,Katsuyoshi Kondoh,Qingshan Zhu,Yanan Lu,Xiaofeng Li, Journal of Materials Processing Technology, Vol. 305, 2022/03
  • Quantitative analysis on surface potentials of impurities and intermetallic compounds dispersed in Mg alloys using scanning Kelvin probe force microscopy and ultraviolet photoelectron spectroscopy, Katsuyoshi Kondoh,Rei Takei,Shota Kariya,Shufeng Li,Junko Umeda, Materials Chemistry and Physics, Vol. 279, 2022/03
  • Developing dual-textured titanium (Ti) extrudates via utilizing the β transus in commercially pure Ti, J. Wana,B. Chen,J. Shen,W. Shi,K. Kondoh,S. Li,J. S. Li, Materials & Design, Vol. 215, 2022/02
  • Preparation of Cu/CrB2 composites with wellbalanced mechanical properties and electrical conductivity by ex-situ powder metallurgy, Xin-feng Guo,Lei Jia,Zhen-lin Lu,Zhi-guo Xing,Hui Xie,Katsuyoshi Kondoh, Journal of Materials Research and Technology, Vol. 17, p. 1605-1615, 2022/01
  • Effects of the secondary shot in the double shot peening process on the residual compressive stress distribution of Ti–6Al–4V, Goratouch Ongtrakulkij,Anak Khantachawana,Julathep Kajornchaiyakul,Katsuyoshi Kondoh, Heliyon, Vol. 8, 2022/01
  • Micro-compression of high oxygen doped single-crystal titanium along different orientations, Xiuxia Wang,Siyu Lu,Biao Chen,Umeda Junko,Yoji Shibutani,Katsuyoshi Kondoh,Jianghua Shen, Materials Science and Engineering: A, Vol. 832, 2022/01
  • ASB induced phase transformation in high oxygen doped commercial purity Ti, Wendi Shi,Siyu Lu,Jianghua Shen,Biao Chen,Junko Umeda,Qiuming Wei,Katsuyoshi Kondoh,Yulong Li, Materials Science and Engineering: A, Vol. 830, 2022/01
  • Microstructure Examination and Sliding Wear Behavior of Al-15%Mg2Si-xGd In Situ Composites before and after Hot Extrusion, Hamidreza Ghandvar,Mostafa Abbas Jabbar,Abdollah Bahador,Tuty Asma Abu Bakar,Nor Akmal Fadil,Katsuyoshi Kondoh, Lubricants, Vol. 10, No. 1, 2021/12/24
  • Compressive behavior of CNT-reinforced aluminum matrix composites under various strain rates and temperatures, Minjie Wang,Jianghua Shen,Biao Chen,Yunfei Wang,Junko Umeda,Katsuyoshi Kondoh,Yulong Li, Ceramics International, 2021/12
  • Advanced tensile properties and strain rate sensitivity of titanium matrix composites reinforced with CaTiO3 particles, Jinheng Yang,Jianghua Shen,Yanxiang Liang,Wendi Shi,Biao Chen,Junko Umeda,Katsuyoshi Kondoh, Journal of Alloys and Compounds, Vol. 897, 2021/12
  • Enhanced strength and ductility of nano-TiBw-reinforced titanium matrix composites fabricated by electron beam powder bed fusion using Ti6Al4V-TiBw composite powder, Deng Pan,Shufeng Li,Lei Liu,Xin Zhang,Bo Li,Biao Chen,Mingqiang Chu,Xiaodong Hou,Zhonggang Sun,Junko Umeda,Katsuyoshi Kondoh, Additive Manufacturing, Vol. 50, 2021/11
  • Quantitative Strengthening Evaluation of Powder Metallurgy Titanium Alloys with Substitutional Zr and Interstitial O Solutes via Homogenization Heat Treatment, Katsuyoshi Kondoh,Shota Kariya,Anak Khantachawana,Abdulaziz Alhazaa,Junko Umeda, Materials, Vol. 14, No. 21, 2021/11/01
  • Additive Manufacturing and Characterization of High Strength Ti-Zr Gyroid Scaffolds Using Pre-Mixed Ti-ZrH2 Powders, Ammarueda Issariyapat,Shota Kariya,Abdulaziz Alhazaa,Junko Umeda,Katsuyoshi Kondoh, JOM, Vol. 73, No. 12, p. 4166-4176, 2021/10
  • Strengthening and deformation mechanism of selective laser-melted high-concentration nitrogen solute α-Ti materials with heterogeneous microstructures via heat treatment, Ammarueda Issariyapat,Abdollah Bahador,Patama Visuttipitukul,Shufeng Li,Junko Umeda,Katsuyoshi Kondoh, Materials Science and Engineering: A, Vol. 826, 2021/10
  • 負の添加元素が拓くチタン積層造形材の力学機能化, 近藤 勝義,梅田 純子,Ammarueda Issariyapat,刈屋 翔太,市川 絵理, 生産と技術, Vol. 73, No. 4, p. 18-21, 2021/09
  • New Magnesium Composite with Mg17Al12 Intermetallic Particles, Ridvan Yamanoglu,Abdollah Bahador,Katsuyoshi Kondoh,Serap Gumus,Sinan Gokce,Onur Muratal, Powder Metallurgy and Metal Ceramics, Vol. 60, p. 110-120, 2021/09
  • Syntheses, microstructure evolution and performance of strength-ductility matched aluminum matrix composites reinforced by nano SiC-cladded CNTs, Lei Liu,Shufeng Li,Xin Zhang,Deng Pan,Lina Gao,Biao Chen,Junko Umeda,Katsuyoshi Kondoh, Materials Science and Engineering: A, Vol. 824, 2021/09
  • Ultrafine-grain formation and improved mechanical properties of novel extruded Ti-Fe-W alloys with complete solid solution of tungsten, Abdollah Bahador,Junko Umeda,Ridvan Yamanoglu,Astuty Amrin,Abdulaziz Alhazaa,Katsuyoshi Kondoh, Journal of Alloys and Compounds, Vol. 875, 2021/09
  • Interfacial microstructure and mechanical property in friction stir welded Mg/Al joints under low rotation speed, Xuesong Fu,Ke Chen,Zhen Zhang,Katsuyoshi Kondoh,Min Wang,Xueming Hua, Science and Technology of Welding and Joining, Vol. 26, p. 470-477, 2021/08/18
  • Interfacial phases formed in friction stir lap welding high entropy alloy to Al alloy, Haining Yao,Hongyuan Wen,Ke Chen,Muyang Jiang,Kolan Madhav Reddy,Katsuyoshi Kondoh,Min Wang,Xueming Hua,Aidang Shan, Scripta Materialia, Vol. 201, 2021/08
  • Fabrication Methods of Porous Titanium Implants by Powder Metallurgy, Ridvan Yamanoglu,Abdollah Bahador,Katsuyoshi Kondoh, Transactions of the Indian Institute of Metals, Vol. 74, p. 2555-2567, 2021/07
  • Strength-ductility balance of powder metallurgy Ti-2Fe-2W alloy extruded at high-temperature, Abdollah Bahador,Ammarueda Issariyapat,Junko Umeda,Ridvan Yamanoglu,Catalin Pruncu,Astuty Amrin,Katsuyoshi Kondoh, Journal of Materials Research and Technology, Vol. 14, p. 677-691, 2021/07
  • Microstructure evolution and reaction behavior of Cu-Ni-Si powder system under solid-state sintering, Lei Jia,Ming-fang Yang,Shi-ping Tao,Hui Xie,Zhen-lin Lu,Katsuyoshi Kondoh,Zhi-guo Xing, Materials Chemistry and Physics, Vol. 271, 2021/07
  • Development of core–shell-structured Ti-(N) powders for additive manufacturing and comparison of tensile properties of the additively manufactured and spark-plasma-sintered Ti-N alloys, Ammarueda Issariyapat,Tingting Song,Patama Visuttipitukul,Junko Umeda,Ma Qian,Katsuyoshi Kondoh, Advanced Powder Technology, Vol. 32, No. 7, p. 2379-2389, 2021/07
  • Substantial role of charge transfer on the diffusion mechanism of interstitial elements in α-titanium: A First-principles study, Kazuki Shitara,Masato Yoshiya,Junko Umeda,Katsuyoshi Kondoh, Scripta Materialia, Vol. 203, 2021/06
  • TiB Whisker and Nitrogen Solid-Solution Synergistic-Strengthened Titanium Matrix Composites by Ti-BN via Spark Plasma Sintering and Hot Extrusion, Deng Pan,Shufeng Li,Lina Gao,Lei Liu,Xin Zhang,Xinghua Ji,Junko Umeda,Katsuyoshi Kondoh, Advanced Engineering Materials, Vol. 23, 2021/06
  • Simulation-informed laser metal powder deposition of Ti-6Al-4V with ultrafine α-β lamellar structures for desired tensile properties, T. Song,T. Dong,S. L. Lu,K. Kondoh,R. Das,M. Brandt,Q. Ma, Additive Manufacturing, Vol. 46, 2021/06
  • Effect of Sintering Temperature on Mechanical Property of Ti + ZrO2 Prepared by Spark Plasma Sintering for Biomedical Applications, Tanapon Tansiranon,Katsuyoshi Kondoh,Kazuhiro Ishikawa,Yoji Miyajima,Anak Khantachawana, Materials Science Forum, Vol. 1033, p. 93-97, 2021/06
  • Improved mechanical properties in titanium matrix composites reinforced with quasi-continuously networked graphene nanosheets and in-situ formed carbides, Q. Yan,B. Chen,L. Cao,K. Y. Liu,S. Li,L. Jia,K. Kondoh,J. S. Li, Journal of Materials Science & Technology, Vol. 96, p. 85-93, 2021/05
  • Precipitation and Distribution Behavior of In Situ-Formed TiB Whiskers in Ti64 Composites Fabricated by Selective Laser Melting, Junko Umeda,Lei Jia,Biao Chen,Ke Chen,Shufeng Li,Kazuki Shitara,Katsuyoshi Kondoh, Crystals, Vol. 11, No. 4, 2021/04/03
  • Solid-solution Strengthening Mechanism of Ti-Zr Sintered Alloy with Biocompatibility, Katsuyoshi Kondoh,Takuma Teramae,Kazuki Shitara,Junko Umeda, Titanium, Vol. 69, No. 2, p. 43-49, 2021/04
  • Effect of Mo Addition on the Mechanical and Wear Behavior of Plasma Rotating Electrode Process Atomized Ti6Al4V Alloy, Ridvan Yamanoglu,Abdollah Bahador,Katsuyoshi Kondoh, Journal of Materials Engineering and Performance, Vol. 30, p. 3203-3212, 2021/04
  • Role B4C Addition on Microstructure, Mechanical, and Wear Characteristics of Al-20%Mg2Si Hybrid Metal Matrix Composite, Hamidreza Ghandvar,Mostafa Abbas Jabbar,Seyed Saeid Rahimian Koloor,Michal Petrů,Abdollah Bahador,Tuty Asma Abu Bakar,Katsuyoshi Kondoh, Applied Sciences, Vol. 11, No. 7, 2021/03/29
  • Effect of Metal Powder Characteristics on Structural Defects of Graphene Nanosheets in Metal Composite Powders Dispersed by Ball Milling, Qi Yan,Biao Chen,Xinyi Zhou,Katsuyoshi Kondoh,Jinshan Li, Crystals, Vol. 11, No. 3, 2021/03/06
  • 大阪大学カップリング・インターンシップにおけるキャリア教育的効果について（実践型短期海外インターンシップ成果報告書からの分析）, 寺西 未沙、勝又 美穂子、西川 宏、近藤 勝義、田中 学, グローバル人材育成教育研究, Vol. 8, No. 2, p. 1-12, 2021/03
  • 文理・異文化融合課題解決型グローバル人材育成プログラムが参加学生の進路検討に与える効果（カップリング・インターンシップ参加学生の進路追跡調査より）, 橋本 智恵、勝又 美穂子、西川 宏、近藤 勝義, グローバル人材育成教育研究, Vol. 8, No. 2, p. 45-53, 2021/03
  • The rate-dependent mechanical behavior of CNT-reinforced aluminum matrix composites under tensile loading, M. Wang,Y. Li,B. Chen,D. Shi,J. Umeda,K. Kondoh,J. Shen, Materials Science and Engineering: A, Vol. 808, 2021/03
  • In-Situ Formed Al3Zr Compounds Reinforced Al Composites and Tribological Application, Junko Umeda,Nodoka Nishimura,Hiroko Fujii,Lei Jia,Katsuyoshi Kondoh, Crystals, Vol. 11, No. 3, 2021/02/25
  • Microstructure evolution and reaction behavior of Cu-Ni alloy and B4C powder system, Lei Jia,Ming-fang Yang,Zhen-lin Lua,Jin Xu,Hui Xie,Katsuyoshi Kondoh, Progress in Natural Science: Materials International, Vol. 31, No. 1, p. 55-62, 2021/02
  • レーザ積層造形法により作製した酸素固溶チタン材における結晶組織と強化機構, 市川 絵理,設樂 一希,梅田 純子,Shufeng LI,Biao CHEN,近藤 勝義, 粉体および粉末冶金, Vol. 68, No. 2, p. 67-75, 2021/02
  • Balanced development in strength-ductility of ultrahigh-strength aluminum matrix composites by controlled oxidation method, Xin Zhang,Shufeng Li,Lei Liu,Deng Pan,Lina Gao,Xinghua Ji,Katsuyoshi Kondoh, Materials Science and Engineering: A, Vol. 804, 2021/02
  • Effect of sintering temperature on the microstructure and mechanical properties of the Ti-2.5Zr alloy, Abdulaziz Alhazaa,Abdulaziz Assaifan,Mahmoud Hezam,Muhammad Ali Shar,Junko Umeda,Katsuyoshi Kondoh, Materials Research Express, Vol. 8, 2021/01
  • Microstructures analysis and quantitative strengthening evaluation of powder metallurgy Ti–Fe binary extruded alloys with (α+β)-dual-phase, Junko Umeda,Takayuki Tanaka,Takuma Teramae,Shota Kariya,Junji Fujita,Hiroshi Nishikawa,Yoji Shibutani,Jianghua Shen,Katsuyoshi Kondoh, Materials Science and Engineering: A, Vol. 803, 2021/01
  • Mechanisms of tensile strengthening and oxygen solid solution in single β-phase Ti-35 at.%Ta+O alloys, Katsuya Yokota,Abdollah Bahador,Kazuki Shitara,Junko Umeda,Katsuyoshi Kondoh, Materials Science and Engineering: A, Vol. 802, 2021/01
  • Microstructure globularization of high oxygen concentration dual-phase extruded Ti alloys via powder metallurgy route, Abdollah Bahador,Junko Umeda,Hamidreza Ghandvar,Tuty Asma Abu Bakar,Ridvan Yamanoglu,Ammarueda Issariyapat,Katsuyoshi Kondoh, Materials Characterization, Vol. 172, 2020/12
  • Acicular microstructure formation and strengthening behavior of Ti-4%Fe alloys by Zr addition, Takuma Teramae,Takayuki Tanaka,Mizuki Fukuo,Kazuki Shitara,Junko Umeda,Shufeng Li,Abdulaziz Alhazaad,Katsuyoshi Kondoh, Journal of Alloys and Compounds, Vol. 858, 2020/12
  • Understanding Corrosion Behavior of Magnesium Surface by x-Ray Irradiation for Improved Surface Design and Applications, Katsuyoshi Kondoh,Keisuke Funatsu,Makoto Takahashi,Shufeng Li,Fumiteru Akamatsu,Junko Umeda, JOM, Vol. 72, No. 10, 2020/12
  • Refined grain formation behavior and strengthening mechanism of α-titanium with nitrogen fabricated by selective laser melting, Ammarueda Issariyapat,Patama Visuttipitukul,Junko Umeda,Katsuyoshi Kondoh, Additive Manufacturing, Vol. 36, 2020/12
  • Dissolution Kinetics of Iron-Based Intermetallic Compounds (τ5c IMCs) in a Commercial Steel Strip Metallic Alloy Coating Process, Abdul Khaliq,Daniel J. Parker,Nega Setargew,Katsuyoshi Kondoh,Ma Qian, Metallurgical and Materials Transactions B, Vol. 52, p. 41-50, 2020/10
  • Tribological properties of low-cost titanium alloys by using rice husk as reinforcement, Lei Jia,Mingfang Yang,Jiangxian Chen,Zhenlin Lu,Katsuyoshi Kondoh,Hui Xie, Rare Metal Materials and Engineering, Vol. 49, No. 10, p. 3309-3313, 2020/10
  • Tensile properties improvement by homogenized nitrogen solid solution strengthening of commercially pure titanium through powder metallurgy process, Ammarueda Issariyapat,Patama Visuttipitukul,Tingting Song,Abdollah Bahador,Junko Umeda,Ma Qian,Katsuyoshi Kondoh, Materials Characterization, Vol. 170, 2020/10
  • その場合成法によるAl3Zr粒子分散Al基焼結複合材の創製および摩擦摩耗特性, 西村 のどか,梅田 純子,藤井 寛子,Lei JIA,近藤 勝義, 粉体および粉末冶金, Vol. 67, No. 10, p. 536-542, 2020/10
  • Strengthening evaluation and high-temperature behavior of Ti-Fe-O-Cu-Si alloy, Abdollah Bahador,Junko Umeda,Ridvan Yamanoglu,Tuty Asma Abu Bakar,Katsuyoshi Kondoh, Materials Science and Engineering: A, Vol. 800, 2020/09
  • Quantitative strengthening evaluation of powder metallurgy Ti-Zr binary alloys with high strength and ductility, Katsuyoshi Kondoh,Mizuki Fukuo,Shota Kariya,Kazuki Shitara,Shufeng Li,Abdulaziz Alhazaa,Junko Umeda, Journal of Alloys and Compounds, Vol. 852, 2020/09
  • Obvious yielding phenomenon and selective fracture behavior in powder metallurgy (TiCp+TiBw)/Ti composites, Lei Jia,Chen Zhang,Katsuyoshi Kondoh,Ruifeng Niu,Biao Chen,Shufeng Li,Zhenlin Lu, Journal of Materials Research and Technology, Vol. 9, No. 5, p. 10184-10188, 2020/09
  • TiB nano-whiskers reinforced titanium matrix composites with novel nano-reticulated microstructure and high performance via composite powder by selective laser melting, Deng Pan,Xin Zhang,Xiaodong Hou,Yuanfei Han,Mingqiang Chu,Biao Chen,Lei Jia,Katsuyoshi Kondoh,Shufeng Li, Materials Science and Engineering: A, Vol. 795, 2020/08
  • Designable interfacial structure and its influence on interface reaction and performance of MWCNTs reinforced aluminum matrix composites, Xin Zhang,Xiaodong Hou,Deng Pan,Bo Pan,Lei Liu,Biao Chen,Katsuyoshi Kondoh,Shufeng Li, Materials Science and Engineering: A, Vol. 793, 2020/08
  • Improved ductility of spark plasma sintered aluminium-carbon nanotube composite through the addition of titanium carbide microparticles, Peter Nyanor,Abdollah Bahador,Omayma A. El-Kady,Junko Umeda,Katsuyoshi Kondoh,Mohsen A. Hassan, Materials Science and Engineering: A, Vol. 795, 2020/07
  • Deformation mechanism and enhanced properties of Cu-TiB2 composites evaluated by the in-situ tensile test and microstructure characterization, Abdollah Bahador,Junko Umeda,Ridvan Yamanoglu,Hamidreza Ghandvar,Ammarueda Issariyapat,Tuty Asma Abu Bakar,Katsuyoshi Kondoh, Journal of Alloys and Compounds, Vol. 847, 2020/07
  • Reduction Mechanism of Thermally Stable CaO during Heating Mg-Al Composites with CaO Particles, Junko Umeda,Junji Fujita,Shufeng Li,Katsuyoshi Kondoh, Journal of Scientific and Engineering Research, Vol. 7, p. 85-93, 2020/07
  • Mechanism of defect formation during friction spot joining of 3D-printed TC4 alloy and ultra-high molecular weight polyethylene, X. Zou,M.Y. Jiang,K. Chen,B.X. Chen,K.M. Reddy,S.Y. Zhang,K. Kondoh,M. Wanga,X.M. Huaa,L.T. Zhang,A.D. Shan, Materials & Design, Vol. 195, 2020/07
  • Comparison study on mechanical properties of powder metallurgy titanium materials with nitrogen solutes and TiN dispersoids, Junko Umeda,Hiroki Ishizaka,Shufeng Li,Abdulaziz Alhzaa,Katsuyoshi Kondoh, Journal of Alloys and Compounds, Vol. 846, 2020/07
  • Mechanical properties and biocompatibility of titanium with a high oxygen concentration for dental implants, Huiwen Luo,Yulu Wu,Xiaoou Diao,Wendi Shi,Fan Feng,Fei Qian,Junko Umeda,Katsuyoshi Kondoh,Haitao Xin,Jianghua Shen, Materials Science and Engineering: C, Vol. 117, 2020/07
  • Microstructure, tensile properties and deformation behaviors of aluminium metal matrix composites co-reinforced by ex-situ carbon nanotubes and in-situ alumina nanoparticles, B. Chen,X.Y. Zhou. B. Zhang,K. Kondoh,J.S. Li,M. Qian, Materials Science and Engineering: A, Vol. 795, 2020/07
  • Tensile property enhancement by oxygen solutes in selectively laser melted titanium materials fabricated from pre-mixed pure Ti and TiO2 powder, Katsuyoshi Kondoh,Eri Ichikawa,Ammarueda Issariyapat,Kazuki Shitara,Junko Umeda,Biao Chen,Shufeng Li, Materials Science and Engineering: A, Vol. 795, 2020/07
  • 選択的レーザー溶融法で作製したチタン積層造形体における酸素固溶強化, 近藤 勝義,市川 絵理,Ammarueda Issariyapat,Patama Visuttipitukul,設樂 一希,梅田 純子, スマートプロセス学会誌, Vol. 9, No. 4, p. 158-163, 2020/07
  • 酸素を活用した高強度チタン積層造形材の開発, 近藤 勝義, 金属, Vol. 90, No. 7, p. 38-43, 2020/07
  • An in-situ study on deformation and cracking initiation in oxygen-doped commercial purity titanium, Jianghua Shen,Biao Chen,Junko Umeda,Jiong Zhang,Yulong Li,Katsuyoshi Kondoh, Mechanics of Materials, Vol. 148, 2020/06
  • チタン材料における酸素や窒素による固溶強化, 近藤 勝義,刈屋 翔太,Patama Visuttipitukul,梅田 純子, 素形材, Vol. 61, No. 6, p. 24-32, 2020/06
  • Effect of quenching media on the properties of TiNi shape memory alloys fabricated by powder metallurgy, Ayman Elsayed,Junko Umeda,Katsuyoshi Kondoh, Journal of Alloys and Compounds, Vol. 842, 2020/06
  • Selective laser-melted titanium materials with nitrogen solid solutions for balanced strength and ductility, Katsuyoshi Kondoh,Ammarueda Issariyapat,Junko Umeda,Patama Visuttipitukul, Materials Science and Engineering: A, Vol. 790, 2020/06
  • Comparison study on microstructure and mechanical properties of Ti-6Al-4V alloys fabricated by powder-based selective-laser-melting and sintering methods, Q. Yan,B. Chen,N. Kang,X. Lin,S. Lv,K. Kondoh,S. Li,J.S. Li, Materials Characterization, Vol. 160, 2020/04
  • Reaction kinetics of Cu-Ni and B4C in Cu-Ni alloy under solid-state sintering, L. Jia,J. Xu,S. Li,Z. Lu,H. Xie,K. Kondoh, Materials Science and Technology, Vol. 36, p. 759-764, 2020/03
  • Ductility Improvement Mechanism of Ti-6Al-4V+O Sintered Material, Kento Kamiyama,Shota Kariya,Mizuki Fukuo,Junko Umeda,Katsuyoshi Kondoh, Materials Transactions, Vol. 61, No. 3, p. 430-437, 2020/02
  • Strength-ductility improvement of extruded Ti-(N) materials using pure Ti powder with high nitrogen solution, Ammarueda Issariyapat,Patama Visuttipitukul,Tingting Song,Junko Umeda,Ma Qian,Katsuyoshi Kondoh, Materials Science and Engineering: A, Vol. 779, 2020/02
  • In-situ observation of interaction between dislocations and carbon nanotubes in aluminum at elevated temperatures, B. Chen,K. Kondoh,J. S. Li, Materials Letters, Vol. 264, 2020/01
  • Mechanical properties and strain hardening behavior of aluminum matrix composites reinforced with few-walled carbon nanotubes, B. Chen,Z. Li,J. Shen,S. Li,L. Jia,J. Umeda,K. Kondoh,J. S. Li, Journal of Alloys and Compounds, Vol. 826, 2020/01
  • High-Brightness and High-Power Laser Welding of Powder Metallurgy Shape Memory Alloy: Welding-Parameter-Dependent Microstructure, Abdollah Bahador,Junko Umeda,Masami Mizutani,Esah Hamzah,Farazila Yusof,Katsuyoshi Kondoh, Journal of Materials Engineering and Performance, 2020/01
  • Synergistic strengthening mechanisms of copper matrix composites with TiO2 nanoparticles, Abdollah Bahador,Junko Umeda,Esah Hamzah,Farazila Yusof,Xiaochun Li,Katsuyoshi Kondoh, Materials Science and Engineering: A, 2019/12
  • Effects of media parameters on enhance ability of hardness and residual stress of Ti6Al4V by fine shot peening, Goratouch Ongtrakulkij,Anak Khantachawana,Katsuyoshi Kondoh, Surfaces and Interfaces, Vol. 18, 2019/12
  • Regulation of interface between carbon nanotubes-aluminum and its strengthening effect in CNTs reinforced aluminum matrix nanocomposites, Xin Zhang,Shufeng Li,Bo Pan,Deng Pan,Lei Liu,Xiaodong Hou,Mingqiang Chu,Katsuyoshi Kondoh,Maiqun Zhao, Carbon, Vol. 155, p. 686-696, 2019/09
  • Extraordinary reinforcing effect of carbon nanotubes in aluminium matrix composites assisted by in-situ alumina nanoparticles, B. Chen,K. Kondoh,J.S. Li,M. Qian, Composites Part B: Engineering, Vol. 183, 2019/09
  • Asymmetric local strain, microstructure and superelasticity of friction stir welded Nitinol alloy, Abdollah Bahador,Junko Umeda,Seiichiro Tsutsumi,Esah Hamzah,Farazila Yusof,Hidetoshi Fujii,Katsuyoshi Kondoh, Materials Science and Engineering: A, Vol. 767, 2019/09
  • Interfacial reaction behavior and mechanical properties of pure aluminum and magnesium alloy dissimilar materials fabricated by hot press and heat treatment, Junko Umeda,Katsuyoshi Kondoh,Hiroyuki Sannomiya,Tachai Luangvaranunt,Makoto Takahashi,Hiroshi Nishikawa, Materials Characterization, Vol. 157, 2019/08
  • Phase Transformation Control of Powder Metallurgy Super-Elastic Ti-Ni Alloy by Adding Co Element, Tomoki Eda,Anak Khantachawana,Junko Umeda,Katsuyoshi Kondoh, Materials Transactions, Vol. 60, No. 8, p. 1583-1590, 2019/08
  • Phase Transformation Control of Powder Metallurgy Super-Elastic Ti-Ni Alloy by Adding Co Element, Tomoki Eda,Anak Khantachawana,Junko Umeda,Katsuyoshi Kondoh, Materials Transactions, Vol. 60, No. 8, p. 1583-1590, 2019/08
  • Strengthening Mechanisms of Powder Metallurgy Extruded CP Titanium Materials with Zirconium and Oxygen Solid Solution via Decomposition of ZrO2 Additives in Sintering, Mizuki Fukuo,Shota Kariya,Junko Umeda,Katsuyoshi Kondoh,Masato Yoshiya, Materials Transactions, Vol. 60, No. 9, p. 1881-1889, 2019/07
  • Heterogeneous Two-Phase Boundary of Titanium by Atomistic Simulation, M. Yoshiyia,T. Kobayashi,A. K. Saha,K. Kondoh, AMTC Letters, Vol. 6, p. 228-229, 2019/06
  • Interfacial in-situ Al2O3 nanoparticles enhance load transfer in carbon nanotube (CNT)-reinforced aluminum matrix composites, B. Chen,K. Kondoh,J. Umeda,S. Li,L. Jia,J. Li, Vol. 789, p. 25-29, 2019/06
  • Characteristics of Titanium Powder with Nitrogen and Mechanical Properties of Its Additive Manufactured Materials, Ammarueda ISSARIYAPAT,Katsuyoshi KONDOH,Patama VISUTTIPITUKUL,Tingting SONG,Ma QIAN,Junko UMEDA, Journal of Smart Processing, Vol. 8, No. 3, p. 95-101, 2019/05
  • Tailoring Microstructure and Properties of a Superelastic Ti-Ta Alloy by Incorporating Spark Plasma Sintering with Thermomechanical Processing Journal of Materials Engineering and Performance, Abdollah Bahador,Shota Kariya,Junko Umeda,Esah Hamzah,and Katsuyoshi Kondoh, Journal of Materials Engineering and Performance, Vol. 28, No. 5, p. 3012-3020, 2019/04
  • A Novel W-Skeleton-Reinforced Al Matrix Composite by Consolidating a Newly Developed Core-Shell-Structured W-Coated Al Powder, Z.H. XIONG,Y.F. YANG,K. KONDOH,R.D.K. MISRA, Metallurgical and Materials Transactions A, Vol. 50, No. 7, p. 3301-3309, 2019/04
  • Hybrid effect of TiCp and TiBw co-strengthening Ti matrix composites prepared by spark plasma sintering and hot extrusion, Lei Jia,Xiao Li,Katsuyoshi Kondoh,Biao Chen,Shufeng Li,Junko Umeda,Zhenlin Lu, Materials Characterization, Vol. 151, p. 6-14, 2019/03
  • Activation of B as a sintering aid and its improved microstructure modification by using Ni-B coated Ti core-shell powder, S.F. Li,Y.F. Yang,K. Kondoh,S. Kariya,Q.S. Zhu,Y. Shi, Materialia, Vol. 5, p. 100182-100182, 2019/03
  • Quantitative Analysis on Light Elements Solution Strengthening in Pure Titanium Sintered Materials by Labusch Model Using Experimental Data, Shota Kariya,Mizuki Fukuo,Junko Umeda,Katsuyoshi Kondoh, Vol. 60, No. 2, p. 263-268, 2019/02
  • Co元素添加によるTi-Ni超弾性焼結合金の力学特性制御, 枝 知樹,A. Khantachawana,梅田 純子,近藤 勝義, 粉体および粉末冶金, Vol. 66, No. 1, p. 9-16, 2019/01
  • Nanocarbon-reinforced metal-matrix composites for structural applications, Qiang Guo,Katsuyoshi Kondoh,Seung Min Han, MRS Bulletin, Vol. 44, No. 1, p. 40-45, 2019/01
  • Rate sensitivity and work-hardening behavior of an advanced Ti-Al-N alloy under uniaxial tensile loading, J. Shen,J. Umeda,B. Chen,J. Zhang,Y.Li,K. Kondoh, Materials Science & Engineering A, Vol. 744, No. 28, p. 630-637, 2019/01
  • Microstructural and mechanical properties of α-titanium sintered material via thermal decomposition of additive chromium oxide particles, Kondoh Katsuyoshi,Ikemasu Ryuho,Umeda Junko,Kariya Shota,Anak Khantachawana, Materials Science and Engineering: A, Vol. 739, No. 2, p. 491-498, 2019/01
  • Tensile Fracture of TiB Whisker Reinforced Ti Alloy Matrix Composites, Hiroki Kurita,Katsuyoshi Kondoh,Junko Umeda,Noriharu Yodoshi, Materials Science Forum, Trans Tech Publications, Ltd., Vol. 941, p. 1961-1965, 2018/12
  • Fe固溶強化チタン焼結材の電気化学特性, 竹内 彰吾,畠山 賢彦,吉矢 真人,刈屋 翔太,梅田 純子,近藤 勝義,砂田 聡, 粉体および粉末冶金, Vol. 65, No. 12, p. 761-765, 2018/12
  • 焼結過程での分解を利用したジルコニウムと酸素の複合固溶による工業用純チタン粉末押出材の強化機構, 福生 瑞希,刈屋 翔太,梅田 純子,近藤 勝義,吉矢 真人, 粉体および粉末冶金, Vol. 65, No. 12, p. 746-755, 2018/12
  • Low pressure spark plasma sintered hydroxyapatite and Bioglass composite scaffolds for bone tissue repair, M. Rizwan,M. Hamdi,W.J. Basirun,K. Kondoh,J. Umeda, Ceramics International, Vol. 44, No. 18, p. 23052-23062, 2018/12
  • 酸素固溶強化Ti-6Al-4V焼結合金の高延性発現機構の解明, 上山 健人,刈屋 翔太,福生 瑞希,梅田 純子,近藤 勝義, 粉体および粉末冶金, Vol. 65, No. 11, p. 699-706, 2018/11
  • Effect of Shape Memory Heat Treatment on Microstructures and Mechanical Properties of Powder Metallurgy TiNi Shape Memory Alloy, Ryoichi Soba,Yukiko Tanabe,Takayuki Yonezawa,Junko Umeda,Katsuyoshi Kondoh, Materials Transactions, Vol. 59, No. 5, p. 805-810, 2018/10
  • A novel strengthening effect of in-situ nano Al2O3w on CNTs reinforced aluminum matrix nanocomposites and the matched strengthening mechanisms, Xin Zhang,Shufeng Li,Bo Pan,Deng Pan,Shengyin Zhou,Shenghui Yang,Lei Jia,Katsuyoshi Kondoh, Journal of Alloys and Compounds, Vol. 764, No. 5, p. 279-288, 2018/10
  • Effect of Rice Husk Ash Silica as Cement Replacement for Making Construction Mortar, Kantapong Boontawee,Withit Pansuk,Luangvaranunt Tachai,Katsuyoshi Kondoh, Key Engineering Materials, Vol. 775, p. 624-629, 2018/08
  • Ductility Improvement Mechanism of Pure Titanium with Excessive Oxygen Solid Solution via Rapid Cooling Process, Shota Kariya,Junko Umeda,Qian Ma,Katsuyoshi Kondoh, J.Japan Inst.Met.Mater., Vol. 82, No. 10, p. 390-395, 2018/08
  • Effect of graphite content on properties of B4C-W2B5 ceramic composites by in situ reaction of B-Gr-WC, Deng Pan,Shufeng Li,Xin Zhang,Bo Pan,Shengyin Zhou,Yabo Fu,Katsuyoshi Kondoh, Journal of the American Ceramic Society, Wiley, Vol. 101, No. 8, p. 3617-3626, 2018/08
  • Quantitative Analysis on Light Elements Solution Strengthening in Pure Titanium Sintered Materials by Labusch Model Using Experimental Data, Shota KARIYA,Mizuki FUKUO,Junko UMEDA,Katsuyoshi KONDOH, Journal of the Japan Society of Powder and Powder Metallurgy, Japan Society of Powder and Powder Metallurgy, Vol. 65, No. 7, p. 407-413, 2018/07/15
  • Comparison Study on Additive Manufacturing (AM) and Powder Metallurgy (PM) AlSi10Mg Alloys, B. Chen,S. K. Moon,X. Yao,G. Bi,J. Shen,J. Umeda,K. Kondoh, JOM, Springer Science and Business Media LLC, Vol. 70, No. 5, p. 644-649, 2018/05
  • Preparation of Si and O co-solution strengthened Ti alloys by using rice husks as SiO2resource and quantitative descriptions on their strengthening effects, Lei Jia,Jiang-xian Chen,Zhen-lin Lu,Shu-feng Li,Junko Umeda,Katsuyoshi Kondoh, Materials Research Express, IOP Publishing, Vol. 5, No. 4, p. 046524-046524, 2018/04/18
  • Evaluation of Tissue Behavior on Three-dimensional Collagen Scaffold Coated with Carbon Nanotubes and β-tricalcium Phosphate Nanoparticles, Hirofumi MIYAJI,Shusuke MURAKAMI,Erika NISHIDA,Tsukasa AKASAKA,Bunshi FUGETSU,Junko UMEDA,Katsuyoshi KONDOH,Tadashi IIZUKA,Tsutomu SUGAYA, Journal of Oral Tissue Engineering, Vol. 15, No. 3, p. 123-130, 2018/04
  • Heat-Conduction-Type and Keyhole-Type Laser Welding of Ti-Ni Shape-Memory Alloys Processed by Spark-Plasma Sintering, Abdollah Bahador,Esah Hamzah,Katsuyoshi Kondoh,Seiichiro Tsutsumi,Junko Umeda,Tuty Asma Abu Bakar,Farazila Yusof, MATERIALS TRANSACTIONS, Vol. 59, No. 5, p. 835-842, 2018/04
  • Microstructure and superelastic properties of free forged Ti–Ni shape-memory alloy, Abdollah BAHADOR,Esah HAMZAH,Katsuyoshi KONDOH,Tuty ASMA ABUBAKAR,Farazila YUSOF,Junko UMEDA,Safaa N. SAUD,Mustafa K. IBRAHIM, Transactions of Nonferrous Metals Society of China (English Edition), Nonferrous Metals Society of China, Vol. 28, No. 3, p. 502-514, 2018/03/01
  • 高出力・高輝度レーザを用いたステンレス鋼の水中レーザ貫通溶接特性, 氷見 太,川人 洋介,水谷 正海,井上 裕滋,近藤 勝義, 溶接学会論文集, Vol. 36, No. 1, p. 122-128, 2018/03
  • Study on Aluminum Matrix Composites Reinforced with Singly Dispersed Carbon Nanotubes, Biao Chen,Junko Umeda,Katsuyoshi Kondoh, Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 65, No. 3, p. 139-144, 2018/03
  • Advanced Mechanical Properties of a Powder Metallurgy Ti-Al-N Alloy Doped with Ultrahigh Nitrogen Concentration, J. Shen,B. Chen,J. Umeda,K. Kondoh, JOM, p. 1-6, 2018/03
  • Microstructure and mechanical properties of CP-Ti fabricated via powder metallurgy with non-uniformly dispersed impurity solutes, J. Shen,B. Chen,J. Umeda,K. Kondoh, Materials Science and Engineering A, Vol. 716, p. 1-10, 2018/02
  • Effect of Shape Memory Heat Treatment on Microstructures and Mechanical Properties of Powder Metallurgy TiNi Shape Memory Alloy, Ryoichi Soba,Yukiko Tanabe,Takayuki Yonezawa,Junko Umeda,Katsuyoshi Kondoh, Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 65, No. 2, p. 85-90, 2018/02
  • Microstructure and synergistic-strengthening efficiency of CNTs-SiCp dual-nano reinforcements in aluminum matrix composites, Xin Zhang,Shufeng Li,Deng Pan,Bo Pan,Katsuyoshi Kondoh, COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, Vol. 105, p. 87-96, 2018/02
  • C-O bond enhancing direct bonding strength between plastic and pure titanium, Katsuyoshi Kondoh,Junko Umeda, MATERIALS LETTERS, ELSEVIER SCIENCE BV, Vol. 211, p. 331-334, 2018/01
  • Tribological Property of α- Pure Titanium Strengthened by Nitrogen Solid-Solution, Yasuhiro Yamabe,Junko Umeda,Hisashi Imai,Katsuyoshi Kondoh, MATERIALS TRANSACTIONS, Vol. 59, No. 1, p. 61-65, 2017/12
  • Microstructures and Mechanical Properties of Shape Memory Alloy Using Pre-Mixed TiNi Powders with TiO2 Particles, Ryoichi Soba,Yukiko Tanabe,Takayuki Yonezawa,Junko Umeda,Katsuyoshi Kondoh, Materials Transactions, Vol. 59, No. 1, p. 117-122, 2017/12
  • Strength and strain hardening of a selective laser melted AlSi10Mg alloy, B. Chen,S. K. Moon,X. Yao,G. Bi,J. Shen,J. Umeda,K. Kondoh, SCRIPTA MATERIALIA, PERGAMON-ELSEVIER SCIENCE LTD, Vol. 141, p. 45-49, 2017/12
  • TiO2粒子添加TiNi混合素粉末焼結材の組織構造と力学特性, 早場 亮一,田邊 由紀子,米澤 隆行,梅田 純子,近藤 勝義, 粉体および粉末冶金, Vol. 64, No. 11, p. 589-594, 2017/11
  • Length effect of carbon nanotubes on the strengthening mechanisms in metal matrix composites, B. Chen,J. Shen,X. Ye,L. Jia,S. Li,J. Umeda,M. Takahashi,K. Kondoh, ACTA MATERIALIA, PERGAMON-ELSEVIER SCIENCE LTD, Vol. 140, p. 317-325, 2017/11
  • Powder Forming Process from Machined Titanium Chips via Heat Treatment in Hydrogen Atmosphere, Junko Umeda,Takanori Mimoto,Hisashi Imai,Katsuyoshi Kondoh, Materials Transactions, Vol. 58, No. 12, p. 1702-1707, 2017/10
  • Advanced mechanical properties of powder metallurgy commercially pure titanium with a high oxygen concentration, Biao Chen,Jianghua Shen,Xiaoxin Ye,Junko Umeda,Katsuyoshi Kondoh, JOURNAL OF MATERIALS RESEARCH, CAMBRIDGE UNIV PRESS, Vol. 32, No. 19, p. 3769-3776, 2017/10
  • Mechanical and superelastic properties of laser welded Ti-Ni shape-memory alloys produced by powder metallurgy, Abdollah Bahador,Esah Hamzah,Katsuyoshi Kondoh,Yousuke Kawahito,Umeda Junko,Tuty Asma Abu Bakar, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, ELSEVIER SCIENCE SA, Vol. 248, p. 198-206, 2017/10
  • Metallurgical Challenges in Carbon Nanotube-Reinforced Metal Matrix Nanocomposites, Abolfazl Azarniya,Mir Saman Safavi,Saeed Sovizi,Amir Azarniya,Biao Chen,Hamid Reza Madaah Hosseini,Seeram Ramakrishna, Metals, Vol. 7, No. 10, p. 1-44, 2017/09
  • 酸化物分散マグネシウム複合焼結材の高温での強化機構解明, 藤田 淳司,梅田 純子,近藤 勝義, 粉体および粉末冶金, Vol. 64, No. 9, p. 479-485, 2017/09
  • Effect of Si Content on Mechanical Properties of Ti-Si-N Ternary Alloys Prepared by Spark Plasma Sintering, Patcharawat Khemglad,Julathep Kajornchaiyakul,Katsuyoshi Kondoh,Anak Khantachawana, Vol. 751, p. 14-18, 2017/08
  • 金属粉末の圧粉成形挙動, 近藤 勝義,谷口 幸典, 塑性と加工, Vol. 58, No. 678, p. 577-581, 2017/07
  • 酸化物粒子の熱分解を利用したチタン焼結材の結晶粒微細化と高強度化（第２報）, 近藤 勝義,池増 竜帆,梅田 純子,刈屋 翔太,ANAK Khantachawana, チタン, Vol. 65, No. 3, p. 114-119, 2017/07
  • Synthesis of Al2Ca Dispersoids by Powder Metallurgy Using a Mg-Al Alloy and CaO Particles, Junji Fujita,Junko Umeda,Katsuyoshi Kondoh, MATERIALS, MDPI AG, Vol. 10, No. 7, p. 716-716, 2017/07
  • In Situ Decomposition of Silicon Nitride Particles in Titanium Composite and its Mechanical Properties, Hisashi IMAI,Hiroyasu YAMABE,Katsuyoshi KONDOH,Junko UMEDA,Anak KHANTACHAWANA, Key Engineering Materials, Vol. 737, p. 38-43, 2017/06
  • 窒素固溶強化純チタン焼結材の摩擦摺動特性, 山辺 康宏,梅田 純子,今井 久志,近藤 勝義, 粉体および粉末冶金, Vol. 64, No. 6, p. 275-280, 2017/06
  • Microstructure and strengthening mechanism of ultrastrong and ductile Ti-xSn alloy processed by powder metallurgy, X. X. Ye,B. Chen,J. H. Shen,J. Umeda,K. Kondoh, JOURNAL OF ALLOYS AND COMPOUNDS, ELSEVIER SCIENCE SA, Vol. 709, p. 381-393, 2017/06
  • Optimazation of mechanical properties of fine-grained non-combustive magnesium alloy joint by asymmetrical double-sided friction stir welding, Juan Chen,Hidetoshi Fujii,Yufeng Sun,Yoshiaoki Morisada,Katsuyoshi Kondoh, J. Mater. Proc. Tech., Vol. 242, p. 117-125, 2017/04
  • 酸化物粒子の熱分解を利用したチタン焼結材の結晶粒微細化と高強度化（第１報）, 近藤勝義,池増竜帆,梅田純子,刈屋翔太,ANAK Khantachawana, チタン, Vol. 65, No. 2, p. 130-137, 2017/04
  • Enhanced Homogenization of Vanadium in Spark Plasma Sintering of Ti-10V-2Fe-3Al Alloy from Titanium and V-Fe-Al Master Alloy Powder Blends, Y. F. Yang,H. Imai,K. Kondoh,M. Qian, JOM, SPRINGER, Vol. 69, No. 4, p. 663-668, 2017/04
  • Solid-state interfacial reaction and load transfer efficiency in carbon nanotubes (CNTs)-reinforced aluminum matrix composites, B. Chen,J. Shen,X. Ye,H. Imai,J. Umeda,M. Takahashi,K. Kondoh, CARBON, PERGAMON-ELSEVIER SCIENCE LTD, Vol. 114, p. 198-208, 2017/04
  • Effect of Spark-Plasma-Sintering Conditions on Tensile Properties of Aluminum Matrix Composites Reinforced with Multiwalled Carbon Nanotubes (MWCNTs), B. Chen,H. Imai,J. Umeda,M. Takahashi,K. Kondoh, JOM, Vol. 69, No. 4, p. 669-675, 2017/03
  • Effect of deformation on the microstructure, transformation temperature and superelasticity of Ti-23 at% Nb shape-memory alloys, Abdollah Bahador,Esah Hamzah,Katsuyoshi Kondoh,Tuty Asma Abu Bakar,Farazila Yusof,Hisashi Imai,Safaa N. Saud,Mustafa K. Ibrahim, MATERIALS & DESIGN, ELSEVIER SCI LTD, Vol. 118, p. 152-162, 2017/03
  • The effect of rolling on the microstructure and compression behavior of AA5083 subjected to large-scale ECAE, J. Shen,X. Chen,V. Hammond,L. J. Kecskes,S. N. Mathaudhu,K. Kondoh,Q. Wei, JOURNAL OF ALLOYS AND COMPOUNDS, ELSEVIER SCIENCE SA, Vol. 695, p. 3589-3597, 2017/02
  • The formation of bimodal multilayered grain structure and its effect on the mechanical properties of powder metallurgy pure titanium, J. Shen,B. Chen,X. Ye,H. Imai,J. Umeda,K. Kondoh, MATERIALS & DESIGN, ELSEVIER SCI LTD, Vol. 116, p. 99-108, 2017/02
  • Strengthening-toughening mechanism study of powder metallurgy Ti-Si alloy by interrupted in-situ tensile tests, X. X. Ye,H. Imai,J. H. Shen,B. Chen,G. Q. Han,J. Umeda,M. Takahashi,K. Kondoh, JOURNAL OF ALLOYS AND COMPOUNDS, ELSEVIER SCIENCE SA, Vol. 694, p. 82-92, 2017/02
  • Measurement of Anisotropic Work-Hardening Properties and Deformation Behavior Analysis of Extruded Magnesium Alloys Using Rapidly Solidified Powders, MA Ninshu,ELSAYED Ayman,KONDOH Katsuyoshi, Journal of the Japan Society for Technology of Plasticity, The Japan Society for Technology of Plasticity, Vol. 58, No. 678, p. 587-592, 2017
  • Defocusing Effects of Laser Beam on the Weldability of Powder Metallurgy Ti-Based Shape Memory Alloys, Abdollah Bahador,Esah Hamzah,Katsuyoshi Kondoh,T. Abubakar,Farazila Yusof,Safaa N. Saud,Mustafa K. Ibrahim,M. A. Ezazi, ADVANCES IN MATERIAL & PROCESSING TECHNOLOGIES CONFERENCE, ELSEVIER SCIENCE BV, Vol. 184, p. 205-213, 2017
  • Dynamic recrystallization behavior and strengthening-toughening effects in a near-alpha Ti-xSi alloy processed by hot extrusion, X. X. Ye,H. Imai,J. H. Shen,B. Chen,G. Q. Han,J. Umeda,M. Takahashi,K. Kondoh, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, Vol. 684, p. 165-177, 2017/01
  • Study of twinning behavior of powder metallurgy Ti-Si alloy by interrupted in-situ tensile tests, X. X. Ye,H. Imai,J. H. Shen,B. Chen,G. Q. Han,J. Umeda,K. Kondoh, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, Vol. 679, p. 543-553, 2017/01
  • 水素熱処理を利用したチタン切削屑の粉体化プロセス, 梅田 純子,三本 嵩哲,今井 久志,近藤 勝義, 粉体および粉末冶金, Vol. 63, No. 12, p. 1002-1008, 2016/12
  • カーボンナノチューブ分散純銅基複合材料の組織変化と力学特性, 今井 久志,近藤 勝義,梅田 純子, 粉体および粉末冶金, Vol. 63, No. 12, p. 1015-1020, 2016/12
  • Microstructural evolution and competitive reaction behavior of Ti-B4C system under solid-state sintering, Lei Jia,Xinsheng Wang,Biao Chen,Hisashi Imai,Shufeng Li,Zhenlin Lu,Katsuyoshi Kondoh, JOURNAL OF ALLOYS AND COMPOUNDS, ELSEVIER SCIENCE SA, Vol. 687, p. 1004-1011, 2016/12
  • Highly Thermally Stable Microstructure in Mg Fabricated Via Powder Rolling, J. Shen,H. Imai,B. Chen,X. Ye,J. Umeda,K. Kondoh, JOM, Vol. 68, No. 12, p. 1-6, 2016/11
  • 焼成籾殻中の脆性炭化物を利用した非晶質シリカ微粒子の生成プロセス, 梅田 純子,藤井 寛子,近藤 勝義, スマートプロセス学会誌, Vol. 5, No. 6, p. 365-372, 2016/11
  • Investigation of High-strength Lead-free Machinable Cu40Zn Duplex Graphite Brasses by Powder Metallurgy, S. Li,H. Imai,J. Umeda,Y. Fu,K. Kondoh, Materials Science and Technology, Vol. 32, No. 17, p. 1-6, 2016/10
  • Bonding mechanism of Ti/AZ80 dissimilar materials fabricated by spark plasma sintering, Patchara Pripanapong,Junko Umeda,Hisashi Imai,Makoto Takahashi,Katsuyoshi Kondoh, Journal of Multidisciplinary Engineering Science Studies (JMESS), Vol. 2, No. 10, p. 1009-1013, 2016/10
  • The influence of CNTs on the microstructure and ductility of CNT/Mg composites, G. Q. Han,J. H. Shen,X. X. Ye,B. Chen,H. Imai,K. Kondoh,W. B. Du, MATERIALS LETTERS, ELSEVIER SCIENCE BV, Vol. 181, p. 300-304, 2016/10
  • Effect of vapor grown carbon fiber content on microstructure and tensile properties of Ti64/TiC composite fabricated by powder metallurgy method, Patchara Pripanapong,Takanori Mimoto,Junko Umeda,Hisashi Imai,Katsuyoshi Kondoh, JOURNAL OF COMPOSITE MATERIALS, SAGE PUBLICATIONS LTD, Vol. 50, No. 24, p. 3405-3414, 2016/10
  • Sintering Behaviors of Carbon NanotubesAluminum Composite Powders, Biao Chen,Katsuyoshi Kondoh, METALS, MDPI AG, Vol. 6, No. 9, 2016/09
  • Tribological behavior of powder metallurgy Ti composites reinforced with multi-wall carbon, Thotsaphon Threrujirapapong,Katsuyoshi Kondoh,Junko Umeda, Journal of Multidisciplinary Engineering Science Studies (JMESS), Vol. 2, No. 8, p. 822-826, 2016/08
  • Anisotropy of texture-controlled powder metallurgy magnesium alloys via rollcompaction process, Katsuyoshi Kondoh,Takamichi Oguri,Junko Umeda,Hisashi Imai, Journal of Multidisciplinary Engineering Science Studies (JMESS), Vol. 2, No. 8, p. 810-814, 2016/08
  • Corrosion Behavior and Strength of Dissimilar Bonding Material between Ti and Mg Alloys Fabricated by Spark Plasma Sintering, Patchara Pripanapong,Shota Kariya,Tachai Luangvaranunt,Junko Umeda,Seiichiro Tsutsumi,Makoto Takahashi,Katsuyoshi Kondoh, MATERIALS, MDPI AG, Vol. 9, No. 8, 2016/08
  • Surface potential analysis on initial galvanic corrosion of Ti/Mg-Al dissimilar material, Junko Umeda,Nozomi Nakanishi,Katsuyoshi Kondoh,Hisashi Imai, MATERIALS CHEMISTRY AND PHYSICS, ELSEVIER SCIENCE SA, Vol. 179, p. 5-9, 2016/08
  • Effect of Textures on Tensile Properties of Extruded Ti64/VGCF Composite by Powder Metallurgy Route, Patchara Pripanapong,Shu-feng Li,Junko Umeda,Katsuyoshi Kondoh, Mechanics, Materials Science & Engineering Journal, Vol. 5, No. 1, 2016/07
  • Residual stress and its effect on the mechanical properties of Y-doped Mg alloy fabricated via back-pressure assisted equal channel angular pressing (ECAP-BP), Jianghua Shen,Viera Gartnerova,Laszlo J. Kecskes,Katsuyoshi Kondoh,Aleg Jager,Qiuming Wei, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, Vol. 669, p. 110-117, 2016/07
  • Tensile Strength of Ti/Mg Alloys Dissimilar Bonding Material Fabricated by Spark Plasma Sintering, Patchara Pripanapong,Junko Umeda,Hisashi Imai,Makoto Takahashi,Katsuyoshi Kondoh, International Journal of Engineering Innovation & Research, Vol. 5, No. 4, p. 253-259, 2016/07
  • Effect of Reaction between Alloying Element and VGCFs on Mechanical and Electrical Properties of PM Copper Alloy Composites Dispersed with VGCFs, H. Imai,K.-Y. Chen,K. Kondoh,J. Umeda,H.-Y. Tsai, J. Jpn. Soc. Powder Powder Metallurgy, Vol. 63, No. 4, p. 150-156, 2016/04
  • Fabrication and Compressive Properties of Low to Medium Porosity Closed-Cell Porous Aluminum Using PMMA Space Holder Technique, Nur Ayuni Jamal,Ai Wen Tan,Farazila Yusof,Kondoh Katsuyoshi,Imai Hisashi,S. Singh,Hazleen Anuar, MATERIALS, MDPI AG, Vol. 9, No. 4, 2016/04
  • Strengthening behavior of in situ-synthesized (TiC-TiB)/Ti composites by powder metallurgy and hot extrusion, Shufeng Li,Katsuyoshi Kondoh,Hisashi Imai,Biao Chen,Lei Jia,Junko Umeda,Yabo Fu, MATERIALS & DESIGN, ELSEVIER SCI LTD, Vol. 95, p. 127-132, 2016/04
  • Simultaneously enhancing strength and ductility of carbon nanotube/aluminum composites by improving bonding conditions, B. Chen,K. Kondoh,H. Imai,J. Umeda,M. Takahashi, SCRIPTA MATERIALIA, PERGAMON-ELSEVIER SCIENCE LTD, Vol. 113, p. 158-162, 2016/03
  • Deformation mechanisms of pure Mg materials fabricated by using pre-rolled powders, J. Shen,H. Imai,B. Chen,X. Ye,J. Umeda,K. Kondoh, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, Vol. 658, p. 309-320, 2016/03
  • Effect of Reaction between Alloying Element and VGCFs on Mechanical and Electrical Properties of PM Copper Alloy Composites Dispersed with VGCFs, Hisashi Imai,Kuan-Yu Chen,Katsuyoshi Kondoh,Junko Umeda,Hung-Yin Tsai, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 57, No. 10, p. 1784-1788, 2016
  • Strengthening Effect of N-addition on Ti-Si-N Ternary Alloys Fabricated by Spark Plasma Sintering, P. Khemglad,J. Kajornchaiyakul,K. Kondoh,A. Khantachawana, 2016 INTERNATIONAL CONFERENCE ON SUSTAINABLE ENERGY, ENVIRONMENT AND INFORMATION ENGINEERING (SEEIE 2016), DESTECH PUBLICATIONS, INC, p. 562-566, 2016
  • Strengthening behaviour and mechanisms of extruded powder metallurgy pure Ti materials reinforced with ubiquitous light elements, T. Mimoto,J. Umeda,K. Kondoh, POWDER METALLURGY, TAYLOR & FRANCIS LTD, Vol. 59, No. 3, p. 223-228, 2016
  • Effect of initial state on dispersion evolution of carbon nanotubes in aluminium matrix composites during a high-energy ball milling process, B. Chen,K. Kondoh,H. Imai,J. Umeda, POWDER METALLURGY, TAYLOR & FRANCIS LTD, Vol. 59, No. 3, p. 216-222, 2016
  • Corrosion Resistant Evaluation of Oxygen Solid-Solution Strengthened Pure Titanium, Satoshi Sunada,Akihiro Takagi,Masahiko Hatakeyama,Junko Umeda,Li Shufeng,Katsuyoshi Kondoh, CHIANG MAI JOURNAL OF SCIENCE, CHIANG MAI UNIV, Vol. 43, No. 2, p. 381-392, 2016
  • Effect of strain rate on the mechanical properties of magnesium alloy AMX602, J. Shen,K. Kondoh,T. L. Jones,S. N. Mathaudhu,L. J. Kecskes,Q. Wei, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, Vol. 649, p. 338-348, 2016/01
  • Friction behavior of network-structured CNT coating on pure titanium plate, Junko Umeda,Bunshi Fugetsu,Erika Nishida,Hirofumi Miyaji,Katsuyoshi Kondoh, APPLIED SURFACE SCIENCE, ELSEVIER SCIENCE BV, Vol. 357, p. 721-727, 2015/12
  • Carbon nanotube induced microstructural characteristics in powder metallurgy Al matrix composites and their effects on mechanical and conductive properties, Biao Chen,Shufeng Li,Hisashi Imai,Lei Jia,Junko Umeda,Makoto Takahashi,Katsuyoshi Kondoh, JOURNAL OF ALLOYS AND COMPOUNDS, ELSEVIER SCIENCE SA, Vol. 651, p. 608-615, 2015/12
  • Crack Formation in Powder Metallurgy Carbon Nanotube (CNT)/Al Composites During Post Heat-Treatment, Biao Chen,Hisashi Imai,Shufeng Li,Lei Jia,Junko Umeda,Katsuyoshi Kondoh, JOM, SPRINGER, Vol. 67, No. 12, p. 2887-2891, 2015/12
  • Effect of Alloying Elements on Mechanical Properties and Electrical Conductivity of P/M Copper Alloys Dispersed with Vapor-Grown Carbon Fiber, Hisashi Imai,Kuan-Yu Chen,Katsuyoshi Kondoh,Hung-Yin Tsai, Processing and Properties of Advanced Ceramics and Composites VII, John Wiley & Sons, Inc., p. 381-391, 2015/10/30
  • Fe/SiC 粒子分散Mg 粉末合金の力学特性と腐食挙動, 刈屋 翔太,梅田 純子,今井 久志,宇野澤 晴生,Manuel MARYA,近藤 勝義, 粉体および粉末冶金, Vol. 62, No. 9, p. 1-6, 2015/09
  • Effect of Welding Parameters on the Hydrogen Embrittlement of Cathodic Hydrogen-Charged Friction Stir Welded High Carbon Steel Joints, Y.F. Sun,H. Fujii,H. Imai,and K. Kondoh, CORROSION, Vol. 71, No. 8, p. 923-936, 2015/08
  • Effect of Chromium Behavior on Mechanical and Electrical Properties of P/M Copper-Chromium Alloy Dispersed with VGCF, Hisashi Imai,Kuan-Yu Chen,Katsuyoshi Kondoh,Hung-Yin Tsai,Junko Umeda, International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering, Vol. 9, No. 7, p. 898-901, 2015/07
  • Interfacial Structure Analysis on Direct Bonding Metals to Plastics, IMAI Hisashi,KONDOH Katsuyoshi,IZAWA Takeru,UMEDA Junko, Trans. JWRI, Vol. 44, No. 1, p. 23-26, 2015/06
  • Biological Response to Nanostructure of Carbon Nanotube/titanium Composite Surfaces, Erika Nishida,Hirofumi Miyaji,Junko Umeda,Katsuyoshi Kondoh,Hiroko Takita,Izumi Kanayama,Saori Tanaka,Akihito Kato,Bunshi Fugetsu,sukasa Akasaka,Masamitsu Kawanami, Nano Biomedicine, Vol. 7, No. 1, p. 11-20, 2015/06
  • Load transfer strengthening in carbon nanotubes reinforced metal matrix composites via in-situ tensile tests, Biao Chen,Shufeng Li,Hisashi Imai,Lei Jia,Junko Umeda,Makoto Takahashi,Katsuyoshi Kondoh, COMPOSITES SCIENCE AND TECHNOLOGY, ELSEVIER SCI LTD, Vol. 113, p. 1-8, 2015/06
  • Suppression of hydrogen-induced damage in friction stir welded low carbon steel joints, Yufeng Sun,Hidetoshi Fujii,Hisashi Imai,Katsuyoshi Kondoh, Corrosion Science, Vol. 94, p. 88-98, 2015/05
  • An approach for homogeneous carbon nanotube dispersion in Al matrix composites, Biao Chen,Shufeng Li,Hisashi Imai,Lei Jia,Junko Umeda,Makoto Takahashi,Katsuyoshi Kondoh, MATERIALS & DESIGN, ELSEVIER SCI LTD, Vol. 72, p. 1-8, 2015/05
  • 粉末冶金および押出し加工を用いた高性能材料の創製, 近藤 勝義,今井 久志, 塑性と加工, Vol. 56, No. 651, p. 290-294, 2015/04
  • Nano-scale AlN powders and AlN/Al composites by full and partial direct nitridation of aluminum in solid-state, Lei Jia,Katsuyoshi Kondoh,Hisashi Imai,Motohiro Onishi,Biao Chen,Shu-feng Li, JOURNAL OF ALLOYS AND COMPOUNDS, ELSEVIER SCIENCE SA, Vol. 629, p. 184-187, 2015/04
  • Microstructure and mechanical properties of P/M titanium matrix composites reinforced by in-situ synthesized TiC-TiB, Shufeng Li,Katsuyoshi Kondoh,Hisashi Imai,Biao Chen,Lei Jia,Junko Umeda, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, Vol. 628, p. 75-83, 2015/03
  • Mechanical behavior of a lanthanum-doped magnesium alloy at different strain rates, J. Shen,W. Yin,K. Kondoh,Tyrone L. Jones,L. J. Kecskes,S. N. Yarmolenko,Q. Wei, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, Vol. 626, p. 108-121, 2015/02
  • Inter-wall bridging induced peeling of multi-walled carbon nanotubes during tensile failure in aluminum matrix composites, Biao Chen,Shufeng Li,Hisashi Imai,Junko Umeda,Makoto Takahashi,Katsuyoshi Kondoh, MICRON, PERGAMON-ELSEVIER SCIENCE LTD, Vol. 69, p. 1-5, 2015/02
  • Titanium Powders via Gas-Solid Direct Reaction Process and Mechanical Properties of Their Extruded Materials, Takanori Mimoto,Junko Umeda,Katsuyoshi Kondoh, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 56, No. 8, p. 1153-1158, 2015
  • Pinning Effect of In-Situ TiCp and TiBw on the Grain Size and Room Temperature Strength of (TiC plus TiB)/Ti Composites, Lei Jia,Biao Chen,Shu-feng Li,Hisashi Imai,Katsuyoshi Kondoh, KONA POWDER AND PARTICLE JOURNAL, HOSOKAWA POWDER TECHNOL FOUNDATION, Vol. 32, No. 32, p. 264-269, 2015
  • Evaluation of temperature distribution in steel balls induced by friction generated during tribotest against diamond like carbon coatings, S. Yamamoto,T. Okuaki,M. Egashira,K. Kondoh,C. Masuda, Tribology - Materials, Surfaces & Interfaces, Vol. 9, No. 1, p. 33-40, 2015/01
  • Materials design for corrosion rate control in PM AZ91 Mg alloy by Fe addition, KARIYA Shota,JUNKO Umeda,IMAI Hisashi,KONDOH Katsuyoshi,HARUO Unosawa,MANUEL Marya, Trans. JWRI, Vol. 43, No. 2, p. 31-36, 2014/12
  • Advanced Powder Metallurgy Non-Ferrous Materials -PM Ti-Ni Shape Memory Alloy with High Strength and Excellent Shape Recovery Rate-, Katsuyoshi KONDOH,Takayuki YONEZAWA,Junko UMEDA,Hisashi IMAI,Ryoichi SOUBA, J. Jpn. Soc. Powder Powder Metallurgy, Vol. 61, No. 11, p. 501-513, 2014/11
  • Stability of strengthening effect of in situ formed TiCp and TiBw on the elevated temperature strength of (TiCp + TiBw)/Ti composites, Lei Jia,Biao Chen,Shu-feng Li,Hisashi Imai,Makoto Takahashi,Katsuyoshi Kondoh, JOURNAL OF ALLOYS AND COMPOUNDS, ELSEVIER SCIENCE SA, Vol. 614, p. 29-34, 2014/11
  • 興味津々の先にあるもの, 近藤 勝義, SUGINO NEWS, No. 178, p. 1-3, 2014/09
  • High-Purity Amorphous Silica Originated in Rice Husks of Agricultural Waste and Utilization of Concrete Admixture, Junko UMEDA,Ryuichi TAKADA,Yoshisada MICHIURA,Katsuyoshi KONDOH, Journal of Smart Processing, Vol. 3, No. 5, p. 317-321, 2014/09
  • Experimental and Theoretical Analysis of Nitrogen Solid-Solution Strengthening of PM Titanium, Katsuyoshi Kondoh,Bin Sun,Shufeng Li,Hisashi Imai,Junko Umeda, International Journal of Powder Metallurgy, Vol. 50, No. 3, p. 35-40, 2014/09
  • Size effect of B4C powders on metallurgical reaction and resulting tensile properties of Ti matrix composites by in-situ reaction from Ti-B4C system under a relatively low temperature, Lei Jia,Shu-feng Li,Hisashi Imai,Biao Chen,Katsuyoshi Kondoh, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, Vol. 614, p. 129-135, 2014/09
  • In Situ Synthesized Al4C3 Nanorods with Excellent Strengthening Effect in Aluminum Matrix Composites, Biao Chen,Lei Jia,Shufeng Li,Hisashi Imai,Makoto Takahashi,Katsuyoshi Kondoh, ADVANCED ENGINEERING MATERIALS, WILEY-V C H VERLAG GMBH, Vol. 16, No. 8, p. 972-975, 2014/08
  • Evaluation of the Wear Energy Consumption of Nitrogenated Diamond-Like Carbon Against Alumina, Shuji Yamamoto,Mitsuru Egashira,Katsuyoshi Kondoh,Chitoshi Masuda, TRIBOLOGY LETTERS, SPRINGER/PLENUM PUBLISHERS, Vol. 55, No. 2, p. 279-288, 2014/08
  • Peeling of Carbon Nanotubes during Tensile Failure in Al Matrix Composites, Chen Biao,LI Shufeng,Imai Hisashi,JIA Lei,Umeda Junko,Takahashi Makoto,Kondoh Katsuyoshi, Trans. JWRI, Vol. 43, No. 1, p. 29-32, 2014/06
  • Fracturing behavior of direct bonded Ti with Mg alloys by Solid state bonding, Pripanapong Patchara,Takahashi Makoto,Umeda Junko,Kondoh Katsuyoshi, Trans. JWRI, Vol. 43, No. 1, p. 25-28, 2014/06
  • Microstructural and mechanical behavior of multi-walled carbon nanotubes reinforced Al-Mg-Si alloy composites in aging treatment, Katsuyoshi Kondoh,Hiroyuki Fukuda,Junko Umeda,Hisashi Imai,Bunshi Fugetsu, CARBON, PERGAMON-ELSEVIER SCIENCE LTD, Vol. 72, p. 15-21, 2014/06
  • 突線鈕式銅鐸破砕プロセスの金属工学的検討とその考古学的意義, 福永 伸哉,近藤 勝義, 纒向学研究センター研究紀要「纒向学研究」, No. 2, p. 21-32, 2014/05
  • 広域アジアものづくり技術・人材高度化拠点形成事業, 近藤 勝義, 生産と技術, Vol. 66, No. 2, p. 129-131, 2014/03
  • Fabrication of High Performance Commercial Titanium Alloys by Spark Plasma Sintering, Yafeng Yang,Katsuyoshi Kondoh,Ma Qian, International Journal of Powder Metallurgy, 2014/03
  • Microstructural and Electrical Properties of Copper-Titanium Alloy Dispersed with Carbon Nanotubes via Powder Metallurgy Process, Hisashi Imai,Katsuyoshi Kondoh,Shufeng Li,Junko Umeda,Bunshi Fugetsu,Makoto Takahashi, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 55, No. 3, p. 522-527, 2014/03
  • Microstructure and Mechanical Properties of Cu-40 %Zn-0.5 %Cr Alloy by Powder Metallurgy, Hisashi Imai,Shufeng Li,Katsuyoshi Kondoh,Yoshiharu Kosaka,Takuya Okada,Koji Yamamoto,Motoi Takahashi,Junko Umeda, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 55, No. 3, p. 528-533, 2014/03
  • Comparison of Spark Plasma Sintering of Elemental and Master Alloy Powder Mixes and Prealloyed Ti-6Al-4V Powder, Y.F. Yang,H. Imai,K. Kondoh,M. Qian, International Journal of Powder Metallurgy, Vol. 50, No. 1, p. 41-47, 2014/01
  • Microstructures and Mechanical Properties of Sintered and Extruded TiNi Shape-Memory Alloys Using Prealloyed Powder with Additions of TiO2 Powder, T. Yonezawa,T. Yoshimura,J. Umeda,K. Kondoh,R. Souba, International Journal of Powder Metallurgy, Vol. 50, No. 1, p. 33-39, 2014/01
  • Characteristics of Lead-free Machinable Brass of Powder Metallurgycu-40 Mass%Zn/1.0 Mass% mg with Graphite Particles, Hisashi Imai,Haruhiko Atsumi,Shufeng Li,Katsuyoshi Kondoh, QUANTUM, NANO, MICRO TECHNOLOGIES AND APPLIED RESEARCHES, TRANS TECH PUBLICATIONS LTD, Vol. 481, p. 79-85, 2014
  • Microstructure and Strengthening Mechanism of Ni-rich TiNi Shape Memory Alloys via Powder Metallurgy Process, Takayuki YONEZAWA,Hisashi IMAI,Junko UMEDA,Katsuyoshi KONDOH,Ryoichi SOUBA, Transactions of the Japan Society of Mechanical Engineers Series A, Vol. 79, No. 808, p. 1695-1704, 2013/12
  • Microstructure, Phase Transformation, Precipitation Behavior and Mechanical Properties of P/M Cu40Zn-1.0 wt% Ti Brass Alloy via Spark Plasma Sintering and Hot Extrusion, Shufeng Li,Hisashi Imai,Katsuyoshi Kondoh, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, JOURNAL MATER SCI TECHNOL, Vol. 29, No. 11, p. 1018-1024, 2013/11
  • Investigation of Powder Metallurgy Titanium Matrix Composites by Planetary Ball-milling of Ti Powder Dispersed with Vapour Grown Carbon Nanofibers, S. Li,K. Kondoh,B. Sun,H. Imai,J. Umeda, Proceedings of Materials Science & Technology 2013 (MS&T'13), p. 3009-3016, 2013/10
  • Effect of Titanium Addition on Mechanical and Electrical Properties of P/M Copper-Titanium Alloy Dispersed with Vapor-grown Carbon Fiber, H. Imai,K. Kondoh,S. Li,J. Umeda, Proceedings of Materials Science & Technology 2013 (MS&T'13), p. 1745-1750, 2013/10
  • Pure Titanium with High Strength and Excellent Ductility by Solid Solute Oxygen Strengthening via Powder Metallurgy Route, K. Kondoh,S. Li,S. Bin,T. Mimoto,H. Imai,J. Umeda, Proceedings of Materials Science & Technology 2013 (MS&T'13), p. 3004-3008, 2013/10
  • ユビキタス軽元素を活用した純チタン粉末押出材における高強靭化機構の解明, 三本 嵩哲,近藤 勝義, チタン, Vol. 61, No. 4, p. 36-41, 2013/10
  • Powder Forming, Powder Forming,Process Committee, Journal of the Japan Society for Technology of Plasticity, The Japan Society for Technology and Plasticity, Vol. 54, No. 631, p. 703-706, 2013/09
  • 水素によるチタン焼結押出材の高強度発現機構, 三本 嵩哲,李 樹豊,梅田 純子,近藤 勝義, 粉体および粉末冶金, Vol. 60, No. 11, p. 467-474, 2013/09
  • 完全鉛フリー・快削性高強度黄銅粉末合金に関する研究 -高強度黄銅合金粉末押出材における添加元素の挙動と機械的特性-, 今井 久志,李 樹豊,上坂 美治,近藤 勝義, 粉体および粉末冶金, Vol. 60, No. 11, p. 453-459, 2013/09
  • Quantitative evaluation of initial galvanic corrosion behavior of CNTs reinforced Mg-Al alloy, Keisuke Funatsu,Hiroyuki Fukuda,Rei Takei,Junko Umeda,Karsuyoshi Kondoh, ADVANCED POWDER TECHNOLOGY, ELSEVIER SCIENCE BV, Vol. 24, No. 5, p. 833-837, 2013/09
  • Improvement in Tensile Property of Ti64 Composites with VGCFs Fabricated by Powder Metallurgy, PRIPANAPONG Patchara,MIMOTO Takanori,LI Shu-feng,IMAI Hisashi,UMEDA Junko,KONDOH Katsuyoshi, Trans. JWRI, Vol. 42, No. 1, p. 27-31, 2013/06
  • Powder Metallurgy Ti-TiC Metal Matrix Composites Prepared by In-situ Reactive Processing of Ti-VGCFs System, Shufeng Li,Bin Sun,Hisashi Imai,Katsuyoshi Kondoh, Carbon, Vol. 61, p. 216-228, 2013/06
  • An investigation of microstructure and phase transformation behavior of Cu40Zn-1.0 wt.% Ti brass via powder metallurgy, S. Li,H. Imai,H. Atsumi,K. Kondoh, Journal of Materials Engineering and Performance, Vol. 22, No. 10, p. 3168-3174, 2013/06
  • The critical role of heating rate in enabling the removal of surface oxide films during spark plasma sintering of Al-based bulk metallic glass powder, X.P. Li,M. Yan,H. Imai,K. Kondoh,G.B. Schaffer,M. Qian, Journal of Non-Crystalline Solids, Vol. 375, p. 95-98, 2013/06
  • Fabrication of carbon nanotube reinforced Al composites with well-balanced strength and ductility, Xudong Yang,Enzuo Liu,Chunsheng Shi,Chunnian He,Jiajun Li,Naiqin Zhao,Katsuyoshi Kondoh, JOURNAL OF ALLOYS AND COMPOUNDS, ELSEVIER SCIENCE SA, Vol. 563, p. 216-220, 2013/06
  • Fabrication of 10 mm diameter fully dense Al86Ni6Y4.5Co2La1.5 bulk metallic glass with high fracture strength, X. P. Li,M. Yan,H. Imai,K. Kondoh,J. Q. Wang,G. B. Schaffer,M. Qian, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, Vol. 568, p. 155-159, 2013/04
  • The Development of a Ti-6Al-4V Alloy via Oxygen Solid Solution Strengthening for Aerospace & Defense Applications, Tyrone L Jones,Katsuyoshi Kondoh,Takanori Mimoto,Nozomi Nakanishi,Junko Umeda, Key Engineering Materials, Vol. 551, p. 118-126, 2013/02
  • Influence of carbon reinforcements on the mechanical properties of Ti composites via powder metallurgy and hot extrusion, Shufeng Li,Bin Sun,Katsuyoshi Kondoh,Takanori Mimoto,Hisashi Imai, Materials Science Forum, Vol. 750, p. 40-43, 2013/02
  • Fabrication of high-strength Ti materials by in-process solid solution strengthening of oxygen via P/M methods, Bin Sun,Shufeng Li,Hisashi Imai,Takanori Mimoto,Junko Umeda,Katsuyoshi Kondoh, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, Vol. 563, p. 95-100, 2013/02
  • Powder metallurgy titanium metal matrix composites reinforced with carbon nanotubes and graphite, Shufeng Li,Bin Sun,Hisashi Imai,Takanori Mimoto,Katsuyoshi Kondoh, Composites Part A: Applied Science and Manufacturing, Vol. 48, p. 57-66, 2013/01
  • Tribological Properties of Titanium Plate Coated with Carbon Nanotubes, Junko Umeda,Takanori Mimoto,Katsuyoshi Kondoh,Bunshi Fugetsu, MATERIALS SCIENCE AND TECHNOLOGY VII, TRANS TECH PUBLICATIONS LTD, Vol. 545, p. 158-+, 2013
  • Strengthening Mechanism of TiNi Shape Memory Sintered Alloy using Elemental Mixtures of Pre-alloyed TiNi Powder and TiO2 Particles, YONEZAWA Takayuki,YOSHIMURA Tomohiro,UMEDA Junko,KONDOH Katsuyoshi,SOUBA Ryouichi, Trans. JWRI, Vol. 41, No. 2, p. 55-59, 2012/12
  • Surface Characteristic and Corrosion Phenomena of X-ray Irradiated Pure Mg, FUNATSU Keisuke,SUZUKI Masashi,TAKAHASHI Makoto,IMAI Hisashi,UMEDA Junko,AKAMATSU Fumiteru,KONDOH Katsuyoshi, Trans. JWRI, Vol. 41, No. 2, p. 13-18, 2012/12
  • Dependence of microstructure and mechanical properties on hot-extrusion temperatures of the developed high-strength Cu40Zn-CrFeTiSn brass by powder metallurgy, Shufeng Li,Hisashi Imai,Katsuyoshi Kondoh,Akimichi Kojima,Yoshiharu Kosaka,Koji Yamamoto,Motoi Takahashi, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, Vol. 558, p. 616-622, 2012/12
  • Cu-40%Zn-0.5%Cr粉末合金の組織および機械的性質に及ぼすCrの挙動, 今井 久志,李 樹豊,近藤 勝義,上坂 美治,岡田 拓也,山本 浩士,高橋 基,梅田 純子, 粉体および粉末冶金, Vol. 59, No. 11, p. 645-651, 2012/11
  • TiO2粒子を添加した高強度TiNi形状記憶粉末合金の組織構造と力学特性, 米澤 隆行,吉村 知浩,梅田 純子,近藤 勝義,早場 亮, スマートプロセス学会誌, Vol. 1, No. 6, p. 288-292, 2012/10
  • 酸素固溶強化による高強度チタン粉末焼結材の創製, 孫 斌,李 樹豊,今井 久志,三本 嵩哲,梅田 純子,近藤 勝義, スマートプロセス学会誌, Vol. 1, No. 6, p. 283-287, 2012/10
  • X線照射による励起場形成を利用した純マグネシウムの表面改質現象, 船津 恵介,梅田 純子,高橋 誠,近藤 勝義, スマートプロセス学会誌, Vol. 1, No. 6, p. 293-297, 2012/10
  • 粉末冶金法を用いたカーボンナノチューブ分散Cu-Ti合金の組織と機械的および電気的特性, 今井 久志,近藤 勝義,李 樹豊,梅田 純子,古月 文志,高橋 誠, 粉体および粉末冶金, Vol. 59, No. 10, p. 609-615, 2012/10
  • Carbon Nanotubes Reinforced Titanium Powder Composite Materials, K. Kondoh,T. Threrujirapapong,S. Li,B. Sun,H. Imai,J. Umeda,B. Fugetsu, Proceedings of Powder Metallurgy World Congress & Exhibition (PM2012), 2012/10
  • The Next-Generation Development of a Superior Grade Titanium Ti-6Al-4V Alloy via Oxygen Solid Solution Strengthening for Aerospace & Defense Applications, K. Kondoh,T. Mimoto,N. Nakanishi,J. Umeda,T. Jones, Proceedings of Titanium 2012, 2012/10
  • Mechanical and electrical properties of P/M copper-titanium alloy dispersed with carbon nanotubes, H. Imai,K. Kondoh,S. Li,J. Umeda, Proceedings of Materials Science & Technology 2012 (MS&T 2012), p. 818-825, 2012/10
  • Microstructure and mechanical property of Cu-40%Zn-0.5%Cr alloy by powder metallurgy, H. Imai,K. Kondoh,A. Kojima,S. Li,Y. Kosaka, Proceedings of Materials Science & Technology 2012 (MS&T 2012), p. 811-817, 2012/10
  • Influence of Surface Potential Difference at Microscopic Interface on Initial Galvanic Corrosion Phenomena of Magnesium Alloy, Keisuke Funatsu,Rei Takei,Junko Umeda,Katsuyoshi Kondoh, Trans. Jpn. Soc. Mech. Eng. -Part A, Vol. 78, No. 794, p. 1432-1445, 2012/09
  • Development of precipitation strengthened brass with Ti and Sn alloying elements additives by using water atomized powder via powder metallurgy route, Shufeng Li,Hisashi Imai,Katsuyoshi Kondoh,Akimichi Kojima,Yoshiharu Kosaka,Koji Yamamoto,Motoi Takahashi, Materials Chemistry and Physics, Elsevier BV, Vol. 135, No. 2-3, p. 644-652, 2012/08
  • Fabrication and properties of high-strength extruded brass using elemental mixture of Cu–40% Zn alloy powder and Mg particle, Haruhiko Atsumi,Hisashi Imai,Shufeng Li,Katsuyoshi Kondoh,Yoshiharu Kousaka,Akimichi Kojima, Materials Chemistry and Physics, Elsevier BV, Vol. 135, No. 2-3, p. 554-562, 2012/08
  • Effect of grain size on the microstructure and mechanical properties of friction stir welded non-combustive magnesium alloys, Juan Chen,Hidetoshi Fujii,Yufeng Sun,Yoshiaki Morisada,Katsuyoshi Kondoh,Kenji Hashimoto, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, Vol. 549, p. 176-184, 2012/07
  • Oxygen Solid Solution Strengthened Pure Titanium Powder Materials, SUN Bin,LI Shufeng,IMAI Hisashi,UMEDA Junko,KONDOH Katsuyoshi, Trans. JWRI, Vol. 41, No. 1, p. 59-64, 2012/06
  • Wear Behavior of Network-Structured Carbon Nanotube Coating on Titanium Substrate, UMEDA Junko,MIMOTO Takanori,KONDOH Katsuyoshi,FUGETSU Bunshi, Trans. JWRI, Vol. 41, No. 1, p. 49-52, 2012/06
  • High-temperature properties of extruded titanium composites fabricated from carbon nanotubes coated titanium powder by spark plasma sintering and hot extrusion, Katsuyoshi Kondoh,Thotsaphon Threrujirapapong,Junko Umeda,Bunshi Fugetsu, COMPOSITES SCIENCE AND TECHNOLOGY, ELSEVIER SCI LTD, Vol. 72, No. 11, p. 1291-1297, 2012/06
  • Effect of Material Flow by Double-Sided Friction Stir Welding on Weld Structure and Mechanical Properties of Magnesium Alloy, J. Chen,H. Fujii,Y.F. Sun,Y. Morisada,K. Kondoh, Proceedings of 9th International Friction Stir Welding Symposium, p. 7A-2-1-7A-2-5, 2012/05
  • The effects of Ti and Sn alloying elements on precipitation strengthened Cu4OZn brass using powder metallurgy and hot extrusion, Shufeng Li,Hisashi Imai,Haruhiko Atsumi,Katsuyoshi Kondoh,Akimichi Kojima,Yoshiharu Kosaka,Koji Yamamoto,Motoi Takahashi, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, Vol. 535, p. 22-31, 2012/02
  • Synthesis kinetics of Mg2Si and solid-state formation of Mg-Mg2Si composite, Bin Sun,Shufeng Li,Hisashi Imai,Junko Umeda,Katsuyoshi Kondoh, POWDER TECHNOLOGY, ELSEVIER SCIENCE SA, Vol. 217, p. 157-162, 2012/02
  • Multi-Walled Carbon Nanotubes Reinforced Titanium Composites via Powder Metallurgy Process, Katsuyoshi Kondoh,Thotsaphon Threrujirapapong,Sun Bin,Hisashi Imai,Li Shufeng,Junko Umeda,Bunshi Fugetsu, POWDER METALLURGY OF TITANIUM: POWDER PROCESSING, CONSOLIDATION AND METALLURGY OF TITANIUM, TRANS TECH PUBLICATIONS LTD, Vol. 520, p. 261-+, 2012
  • COST EFFECTIVE AND ECO-FRIENDLY PROCESS FOR PREPARATION OF WROUGHT PURE Ti MATERIAL VIA DIRECT CONSOLIDATION OF TiH2 POWDERS, Takanori Mimoto,Nozomi Nakanishi,Thotsaphon Threrujirapapong,Junko Umeda,Katsuyoshi Kondoh, TMS 2012 141ST ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND INTERFACES, MINERALS, METALS & MATERIALS SOC, p. 879-886, 2012
  • MECHANICAL PROPERTIES OF MG ALLOYS AMX602 AND AZXE7111 UNDER QUASI-STATIC AND DYNAMIC LOADING, J. Shen,K. Kondoh,T. L. Jones,S. N. Mathaudhu,L. J. Kecskes,Q. Wei, MAGNESIUM TECHNOLOGY 2012, JOHN WILEY & SONS, p. 371-375, 2012
  • INTERFACIAL ANALYSIS OF CNT REINFORCED AZ61 MG ALLOY COMPOSITES, Katsuyoshi Kondoh,Hiroyuki Fukuda,Junko Umeda,Bunshi Fugetsu, TMS 2012 141ST ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND INTERFACES, MINERALS, METALS & MATERIALS SOC, p. 717-723, 2012
  • Mechanical Properties and Strengthening Mechanism of Pure Ti Powder Composite Material Reinforced with Carbon Nano Particles, MIMOTO Takanori,NAKANISHI Nozomi,UMEDA Junko,KONDOH Katsuyoshi, Trans. JWRI, Vol. 40, No. 2, p. 63-68, 2011/12
  • Fabrication of high-strength Cu40ZnSnTi brass via powder metallurgy and hot extrusion, LI Shufeng,IMAI Hisashi,ATSUMI Haruhiko,KONDOH Katsuyoshi, Trans. JWRI, Vol. 40, No. 2, p. 59-62, 2011/12
  • 粉末材料・複合材料・ポーラス材料, 金武 直幸,近藤 勝義,久保田 正広,佐々木 元,小橋 眞,北薗 幸一,鈴木 進補, 軽金属, Vol. 61, No. 11, p. 678-683, 2011/11
  • 研究，創造技術の歩みと展望 粉末材料・複合材料・ポーラス材料, 金武 直幸,近藤 勝義,久保田 正広,佐々木 元,小橋 眞,北薗 幸一,鈴木 進補, 軽金属, Vol. 61, No. 11, p. 678-683, 2011/11
  • Fabrication of Powder Metallurgy Pure Ti Material by Using Thermal Decomposition of TiH2, Takanori MIMOTO,Nozomi NAKANISHI,Junko UMEDA,Katsuyoshi KONDOH, Journal of High Temperature Society, Vol. 37, No. 6, p. 326-331, 2011/11
  • Kinetic Analysis of Solid-State Formation of Mg2Si by Powder Metallurgy Process, Bin SUN,Shufeng LI,Hisashi IMAI,Junko UMEDA,Katsuyoshi KONDOHI, Journal of High Temperature Society, Vol. 37, No. 6, p. 321-325, 2011/11
  • High-strength, lead-free machinable alpha-beta duplex phase brass Cu-40Zn-Cr-Fe-Sn-Bi alloys, Haruhiko Atsumi,Hisashi Imai,Shufeng Li,Katsuyoshi Kondoh,Yoshiharu Kousaka,Akimichi Kojima, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, Vol. 529, p. 275-281, 2011/11
  • A fundamental study of laser welding of hot extruded powder metallurgy (P/M) AZ31B magnesium alloy, M. Wahba,Y. Kawahito,K. Kondoh,S. Katayama, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, Vol. 529, p. 143-150, 2011/11
  • Surface Corrosion Behavior of Electron-Excited Pure Mg, K. Funatsu,R. Takei,J. Umeda,K. Kondoh, Proceedings of Materials Science & Technology (MS&T) 2011, p. 1397-1404, 2011/10
  • Composite Titanium Powder Coated with Carbon Black Particles Using Wasted Black Ink and Mechanical Properties of Its Extruded Material, T. Mimoto,N. Nakanishi,T. Threrujirapapong,J. Umeda,K. Kondoh, Proceedings of Materials Science & Technology (MS&T) 2011, p. 1002-1009, 2011/10
  • High strain rate induced localized amorphization in cubic BN/NiCrAl nanocomposite through high velocity impact, Xiao-Tao Luo,Guan-Jun Yang,Chang-Jiu Li,Katsuyoshi Kondoh, SCRIPTA MATERIALIA, PERGAMON-ELSEVIER SCIENCE LTD, Vol. 65, No. 7, p. 581-584, 2011/10
  • Thermo-dynamic analysis on solid-state reduction of CaO particles dispersed in Mg-Al alloy, Katsuyoshi Kondoh,Junji Fujita,Junko Umeda,Hisashi Imai,Keitaro Enami,Masaki Ohara,Takanori Igarashi, MATERIALS CHEMISTRY AND PHYSICS, ELSEVIER SCIENCE SA, Vol. 129, No. 1-2, p. 631-640, 2011/09
  • The texture and anisotropy of hot extruded magnesium alloys fabricated via rapid solidification powder metallurgy, Ayman Elsayed,Junko Umeda,Katsuyoshi Kondoh, MATERIALS & DESIGN, ELSEVIER SCI LTD, Vol. 32, No. 8-9, p. 4590-4597, 2011/09
  • Effect of Chromium Precipitation on Machinability of Sintered Brass Alloys Dispersed with Graphite Particles, H. Imai,S. Li,K. Kondoh,Y. Kosaka,A. Kojima,H. Atsumi,Junko Umeda, Materials Transactions, Vol. 52, No. 7, p. 1426-1430, 2011/07
  • Corrosion and Ballistic Analysis of New Military Grade Magnesium Alloys AMX602 and ZAXE1711 for Armor Application, Tyrone Jones,Katsuyoshi Kondoh,Brian E. Placzankis, Proceedings of the Department of Defense Corrosion Conference 2011, 2011/07
  • Evaluation of Initial Corrosion Phenomenon of Magnesium Alloys by SKPFM, Katsuyoshi Kondoh,Nozomi Nakanishi,Rei Takei,Hiroyuki Fukuda,Junko Umeda, Materials Science Forum, Trans Tech Publications, Ltd., Vol. 690, p. 397-400, 2011/06
  • Un-Bundled Carbon Nanotubes Reinforced Light Metal Composites via Powder Metallurgy Route, Katsuyoshi Kondoh,Thotsaphon Threrujirapapong,Hiroyuki Fukuda,Junko Umeda, Materials Science Forum, Trans Tech Publications, Ltd., Vol. 690, p. 339-342, 2011/06
  • The Effect of Solid Solutionizing Ti Element on Microstructural and Mechanical Properties of Extruded Cu-40Zn-Ti Ternary Alloy, ATSUMI Haruhiko,IMAI Hisashi,LI Shufeng,KONDOH Katsuyoshi,KOUSAKA Yoshiharu,KOJIMA Akimichi, Trans. JWRI, Vol. 40, No. 1, p. 67-71, 2011/06
  • Electron Excitation Effect of Pure Mg Surface on initial Corrosion Phenomenon, FUNATSU Keisuke,TAKEI Rei,UMEDA Junko,KONDOH Katsuyoshi, Trans. JWRI, Vol. 40, No. 1, p. 9-14, 2011/06
  • Fabrication of magnesium based composites reinforced with carbon nanotubes having superior mechanical properties, Hiroyuki Fukuda,Katsuyoshi Kondoh,Junko Umeda,Bunshi Fugetsu, MATERIALS CHEMISTRY AND PHYSICS, ELSEVIER SCIENCE SA, Vol. 127, No. 3, p. 451-458, 2011/06
  • Aging behavior of the matrix of aluminum-magnesium-silicon alloy including carbon nanotubes, Hiroyuki Fukuda,Katsuyoshi Kondoh,Junko Umeda,Bunshi Fugetsu, MATERIALS LETTERS, ELSEVIER SCIENCE BV, Vol. 65, No. 11, p. 1723-1725, 2011/06
  • Interfacial analysis between Mg matrix and carbon nanotubes in Mg-6 wt.% Al alloy matrix composites reinforced with carbon nanotubes, Hiroyuki Fukuda,Katsuyoshi Kondoh,Junko Umeda,Bunshi Fugetsu, COMPOSITES SCIENCE AND TECHNOLOGY, ELSEVIER SCI LTD, Vol. 71, No. 5, p. 705-709, 2011/03
  • Analysis of Local Corrosion Phenomenon on Interface between Mg-Al Alloy and Ti, Nozomi Nakanishi,Rei Takei,Hisashi Imai,Katsuyoshi Kondoh, Trans. Jpn. Soc. Mech. Eng. -Part A, Vol. 77, No. 774, p. 316-322, 2011/02
  • Evaluation of Galvanic Corrosion Phenomenon between α-Mg Matrix and Metallic Dispersoids in Mg Alloys Using Surface Potential Difference, Rei Takei,Junko Umeda,Katsuyoshi Kondoh, Trans. Jpn. Soc. Mech. Eng. -Part A, Vol. 77, No. 774, p. 301-315, 2011/02
  • Fabrication of mesoporous polymer monolith: a template-free approach, Keisuke Okada,Mahasweta Nandi,Jun Maruyama,Tatsuya Oka,Takashi Tsujimoto,Katsuyoshi Kondoh,Hiroshi Uyama, CHEMICAL COMMUNICATIONS, ROYAL SOC CHEMISTRY, Vol. 47, No. 26, p. 7422-7424, 2011
  • Effect of Heat Treatment on Phase Transformation and Precipitation Behavior of Cu40Zn-1.0 wt% Ti Brass via Powder Metallurgy, Shufeng Li,Hisashi Imai,Akimichi Kojima,Yoshiharu Kosaka,Koji Yamamoto,Motoi Takahashi,Haruhiko Atsumi,Katsuyoshi Kondoh, FUNDAMENTAL OF CHEMICAL ENGINEERING, PTS 1-3, TRANS TECH PUBLICATIONS LTD, Vol. 233-235, p. 2732-+, 2011
  • THE PRODUCTION OF POWDER METALLURGY HOT EXTRUDED Mg-Al-Mn-Ca ALLOY WITH HIGH STRENGTH AND LIMITED ANISOTROPY, Ayman Elsayed,Junko Umeda,Katsuyoshi Kondoh, MAGNESIUM TECHNOLOGY 2011, JOHN WILEY & SONS, p. 475-480, 2011
  • BALLISTIC ANALYSIS OF NEW MILITARY GRADE MAGNESIUM ALLOYS FOR ARMOR APPLICATIONS, Tyrone L. Jones,Katsuyoshi Kondoh, MAGNESIUM TECHNOLOGY 2011, JOHN WILEY & SONS, p. 425-430, 2011
  • EFFECT OF REACTED LAYER ON GALVANIC CORROSION PHENOMENON AT INTERFACE BETWEEN TI DISPERSION AND MG-AL ALLOY, Katsuyoshi Kondoh,Nozomi Nakanishi,Rei Taker,Junko Umeda, TMS2011 SUPPLEMENTAL PROCEEDINGS, VOL 3: GENERAL PAPER SELECTIONS, JOHN WILEY & SONS, p. 93-100, 2011
  • Effects of SPS parameters on the mechanical properties and microstructures of titanium reinforced with multi-wall carbon nanotubes produced by hot extrusion, Thotsaphon Threrujirapapong,Takahiro Mimoto,Katsuyoshi Kondoh,Junko Umeda,Bunshi Fugetsu, TMS2011 SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS FABRICATION, PROPERTIES, CHARACTERIZATION, AND MODELING, JOHN WILEY & SONS, p. 821-828, 2011
  • Fabrication and properties of lead-free machinable brass with Ti additive by powder metallurgy, Shufeng Li,Katsuyoshi Kondoh,Hisashi Imai,Haruhiko Atsumi, POWDER TECHNOLOGY, ELSEVIER SCIENCE SA, Vol. 205, No. 1-3, p. 242-249, 2011/01
  • Application of rapid solidification powder metallurgy to the fabrication of high-strength, high-ductility Mg-Al-Zn-Ca-La alloy through hot extrusion, Elsayed Ayman,Umeda Junko,Kondoh Katsuyoshi, ACTA MATERIALIA, PERGAMON-ELSEVIER SCIENCE LTD, Vol. 59, No. 1, p. 273-282, 2011/01
  • Contribution of Ti addition to characteristics of extruded Cu40Zn brass alloy prepared by powder metallurgy, Shufeng Li,Hisashi Imai,Haruhiko Atsumi,Katsuyoshi Kondoh, MATERIALS & DESIGN, ELSEVIER SCI LTD, Vol. 32, No. 1, p. 192-197, 2011/01
  • The influence of carbon nanotubes on the corrosion behaviour of AZ31B magnesium alloy, Hiroyuki Fukuda,Jerzy A. Szpunar,Katsuyoshi Kondoh,Richard Chromik, CORROSION SCIENCE, PERGAMON-ELSEVIER SCIENCE LTD, Vol. 52, No. 12, p. 3917-3923, 2010/12
  • Microstrucutre and Mechanical Properties of High Strength Brass Alloy with Some Elements, Haruhiko Atsumi,Hisashi Imai,Shufeng Li,Yoshiharu Kosaka,Akimichi Kojima,Katsuyoshi Kondoh, Trans. Jpn. Soc. Mech. Eng. -Part A, Vol. 76, No. 771, p. 1501-1506, 2010/11
  • High-purification of amorphous silica originated from rice husks by combination of polysaccharide hydrolysis and metallic impurities removal, Junko Umeda,Katsuyoshi Kondoh, INDUSTRIAL CROPS AND PRODUCTS, ELSEVIER SCIENCE BV, Vol. 32, No. 3, p. 539-544, 2010/11
  • Wettability Evaluation of Pure Ti by Molten Mg Alloy Droplet for Materials Design of P/M Mg Composite Alloy Reinforced with Ti Particles, N. Nakanishi,H. Imai,K. Kondoh, CD Proceedings World PM2010: International Powder Metallurgy Congress & Exhibition, 2010/10
  • Advantages of a Wet Process for the Production of Ti Matrix Composite Reinforced with Carbon Nano Materials by Powder Metallurgy Route, T. Threrujirapapong,K. Kondoh,H. Imai,J. Umeda,B. Fugetsu, CD Proceedings World PM2010: International Powder Metallurgy Congress & Exhibition, 2010/10
  • Precipitation Hardening Response of Ti Addition on BS40 Brass by Powder Metallurgy, S. Li,H. Imai,H. Atsumi,K. Kondoh, CD Proceedings World PM2010: International Powder Metallurgy Congress & Exhibition, 2010/10
  • Carbon Nanotube Reinforced Pure Titanium Powder Composite Materials by Using Zwitterionic Surfactant Solution, K. Kondoh,T. Threrujirapapong,J. Umeda, Proceedings of Materials Science & Technology (MS&T) 2010, p. 2233-2238, 2010/10
  • The Development of Superior Magnesium Alloy AMX602 using a Novel Rapid Solidification Process for Structural Applications, T. Jones,K. Kondoh,B. Placzankis, Proceedings of Materials Science & Technology (MS&T) 2010, p. 2008-2019, 2010/10
  • SKPFM Quantitative Evaluation of Initial Galvanic Corrosion Phenomenon of Magnesium Alloys, K. Kondoh,R. Takei,H. Fukuda,J. Umeda,H. Imai, Proceedings of Materials Science & Technology (MS&T) 2010, p. 745-752, 2010/10
  • Phase transformation and precipitation hardening behavior of Cr and Fe in BS40CrFeSn alloy, Shufeng Li,Hisashi Imai,Haruhiko Atsumi,Katsuyoshi Kondoh, JOURNAL OF MATERIALS SCIENCE, SPRINGER, Vol. 45, No. 20, p. 5669-5675, 2010/10
  • Microstructural and mechanical properties of titanium particulate reinforced magnesium composite materials, Junko Umeda,Masashi Kawakami,Katsuyoshi Kondoh,El-Sayed Ayman,Hisashi Imai, MATERIALS CHEMISTRY AND PHYSICS, ELSEVIER SCIENCE SA, Vol. 123, No. 2-3, p. 649-657, 2010/10
  • Relationship between surface potential difference and galvanic corrosion of Magnesium Alloy Using SKPFM, Rei TAKEI,Hisashi IMAI,Junko UMEDA,Katsuyoshi KONDOH, Trans. JWRI, Vol. 39, No. 1, p. 75-80, 2010/09
  • Hot Extrusion of Pure Titanium Reinforced with Carbon Nanotubes, Thotsaphon Threrujirapapong,Katsuyoshi Kondoh,Hisashi Imai,Junko Umeda,Bunshi Fugetsu, STEEL RESEARCH INTERNATIONAL, WILEY-V C H VERLAG GMBH, Vol. 81, No. 9, p. 1320-1323, 2010/09
  • Effects of Ti Addition on Microstructure and Mechanical Properties of Extruded Cu40Zn-2.2Bi Brass by Powder Metallurgy, Shufeng Li,Katsuyoshi Kondoh,Hisashi Imai,Haruhiko Atsumi, STEEL RESEARCH INTERNATIONAL, WILEY-V C H VERLAG GMBH, Vol. 81, No. 9, p. 1312-1315, 2010/09
  • Microstructure and Mechanical Properties of Hot Extruded ZK61 Alloy Produced by Rapid Solidified Powder Metallurgy, Ayman Elsayed,Hisashi Imai,Junko Umeda,Katsuyoshi Kondoh, STEEL RESEARCH INTERNATIONAL, WILEY-V C H VERLAG GMBH, Vol. 81, No. 9, p. 1304-1307, 2010/09
  • Effect of Bismuth Addition on Machinability and Mechanical Properties of Lead-Free Brass via Powder Metallurgy Process, Hisashi Imai,Sufeng Li,HaruhikoAtsumi,Katsuyoshi Kondoh,Yoshiharu Kosaka,Akimichi Kojima, STEEL RESEARCH INTERNATIONAL, WILEY-V C H VERLAG GMBH, Vol. 81, No. 9, p. 1296-1299, 2010/09
  • Advanced Powder Metallurgy Light Metals by Metal Working, Katsuyoshi Kondoh,Kantarou Kaneko,Toru Akita, STEEL RESEARCH INTERNATIONAL, WILEY-V C H VERLAG GMBH, Vol. 81, No. 9, p. 1283-1287, 2010/09
  • 年間展望・粉末成形, 近藤 勝義, 塑性と加工, Vol. 51, No. 595, p. 773-776, 2010/08
  • Mg-Al系合金とTiの高温濡れ現象, 中西 望,今井 久志,近藤 勝義,藤井 英俊, 高温学会誌, Vol. 36, No. 4, p. 192-195, 2010/07
  • Machinability and mechanical properties of lead-free wrought brass alloys with bismuth and graphite particles by powder metallurgy process, Imai Hisashi,Katsuyoshi Kondoh,Shufeng Li,Haruhiko Atsumi,Yoshiharu Kosaka,Akimichi Kojima,Junko Umeda, Proceedings of the 7th International Copper-Cobre Conference 2010, Vol. 1, p. 89-98, 2010/06
  • Microstructural and mechanical analysis of carbon nanotube reinforced magnesium alloy powder composites, Katsuyoshi Kondoh,Hiroyuki Fukuda,Junko Umeda,Hisashi Imai,Bunshi Fugetsu,Morinobu Endo, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, Vol. 527, No. 16-17, p. 4103-4108, 2010/06
  • Development of Lead-Free Machinable Brass with Bismuth and Graphite Particles by Powder Metallurgy Process, Hisashi Imai,Li Shufeng,Haruhiko Atsumi,Yoshiharu Kosaka,Akimichi Kojima,Katsuyoshi Kondoh, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 51, No. 5, p. 855-859, 2010/05
  • Microstructure and mechanical properties of hot extruded Mg-Al-Mn-Ca alloy produced by rapid solidification powder metallurgy, Ayman Elsayed,Katsuyoshi Kondoh,Hisashi Imai,Junko Umeda, MATERIALS & DESIGN, ELSEVIER SCI LTD, Vol. 31, No. 5, p. 2444-2453, 2010/05
  • Aluminum-4 mass% Copper/Alumina Composites Produced from Aluminum Copper and Rice Husk Ash Silica Powders by Powder Forging, Tachai Luangvaranunt,Chinawad Dhadsanadhep,Junko Umeda,Ekasit Nisaratanaporn,Katsuyoshi Kondoh, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 51, No. 4, p. 756-761, 2010/04
  • 粉体プロセスによるカーボンナノチューブ分散金属基焼結材料の特性, 近藤 勝義,古月 文志, 高温学会誌, Vol. 36, No. 2, p. 110-115, 2010/03
  • Characteristics of high strength extruded BS40CrFeSn alloy prepared by spark plasma sintering and hot pressing, Shufeng Li,Hisashi Imai,Haruhiko Atsumi,Katsuyoshi Kondoh, JOURNAL OF ALLOYS AND COMPOUNDS, ELSEVIER SCIENCE SA, Vol. 493, No. 1-2, p. 128-133, 2010/03
  • Characteristics and machinability of lead-free P/M Cu60-Zn40 brass alloys dispersed with graphite, Hisashi Imai,Yoshiharu Kosaka,Akimichi Kojima,Shufeng Li,Katsuyoshi Kondoh,Junko Umeda,Haruhiko Atsumi, POWDER TECHNOLOGY, ELSEVIER SCIENCE SA, Vol. 198, No. 3, p. 417-421, 2010/03
  • Microstructures and mechanical responses of powder metallurgy non-combustive magnesium extruded alloy by rapid solidification process in mass production, Katsuyoshi Kondoh,El-Sayed Ayman Hamada,Hisashi Imai,Junko Umeda,Tyrone Jones, MATERIALS & DESIGN, ELSEVIER SCI LTD, Vol. 31, No. 3, p. 1540-1546, 2010/03
  • Microstructure and Mechanical Properties of High Strength Brass Alloy with Some Elements, Haruhiko Atsumi,Hisashi Imai,Li Shufeng,Yoshiharu Kousaka,Akimichi Kojima,Katsuyoshi Kondoh, PRICM 7, PTS 1-3, TRANS TECH PUBLICATIONS LTD, Vol. 654-656, p. 2552-+, 2010
  • Mechanical Properties of Oxide Dispersion Strengthened Pure Titanium Produced by Powder Metallurgy Method, Tomohiro Yoshimura,Thotsaphon Thrirujirapaphong,Hisashi Imai,Katsuyoshi Kondoh, PRICM 7, PTS 1-3, TRANS TECH PUBLICATIONS LTD, Vol. 654-656, p. 815-+, 2010
  • High Strength and Lead-free Machinable Brass by Powder Metallurgy Process, Hisashi Imai,Shufeng Li,Yoshiharu Kosaka,Akimichi Kojima,Haruhiko Atsumi,Katsuyoshi Kondoh, PRICM 7, PTS 1-3, TRANS TECH PUBLICATIONS LTD, Vol. 654-656, p. 2680-+, 2010
  • Corrosion Phenomenon Evaluation of Mg Alloys using Surface Potential Difference Measured by SKPFM, Rei Takei,Hiroyuki Fukuda,Hisashi Imai,Junko Umeda,Katsuyoshi Kondoh, MAGNESIUM TECHNOLOGY 2010, MINERALS, METALS & MATERIALS SOC, p. 169-+, 2010
  • FABRICATION OF HIGH STRENGTH PURE Ti MATRIX COMPOSITE REINFORCED WITH CARBON BLACK PARTICLE VIA WET PROCESS, Thotsaphon Threrujirapapong,Katsuyoshi Kondoh,Hisashi Imai,Junko Umeda,Bunshi Fugetsu, TMS 2010 139TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS CHARACTERIZATION, COMPUTATION AND MODELING AND ENERGY, MINERALS, METALS & MATERIALS SOC, p. 181-+, 2010
  • UN-BUNDLED CARBON NANOTUBES REINFORCED TITANIUM COMPOSITES VIA POWDER METALLURGY PROCESS, Katsuyoshi Kondoh,Thotsaphon Threrujirapapong,Hisashi Imai,Junko Umeda,Bunshi Fugetsu, TMS 2010 139TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS CHARACTERIZATION, COMPUTATION AND MODELING AND ENERGY, MINERALS, METALS & MATERIALS SOC, p. 173-+, 2010
  • 農業廃棄物からの資源・エネルギー回収を考える, 近藤 勝義, サステナ, No. 14, p. 111-115, 2010/01
  • 高耐衝撃性マグネシウム合金の製造技術の開発, 廖 金孫,堀田 真,閤師 昭彦,金子 貫太郎,近藤 勝義, まてりあ, Vol. 49, No. 1, p. 23-25, 2010/01
  • Wettability of pure Ti by molten pure Mg droplets, Katsuyoshi Kondoh,Masashi Kawakami,Hisashi Imai,Junko Umeda,Hidetoshi Fujii, ACTA MATERIALIA, PERGAMON-ELSEVIER SCIENCE LTD, Vol. 58, No. 2, p. 606-614, 2010/01
  • Microstructural and Mechanical Properties of Ti Composite Reinforced with TiO2 Additive Particles, YOSHIMURA Tomohiro,THOTSAPHON Threrujirapapong,IMAI Hisashi,KONDOH Katsuyoshi, Trans. JWRI, Vol. 38, No. 2, p. 37-41, 2009/12
  • Effect of Consolidation and Extrusion Temperatures on Tensile Properties of Hot Extruded ZK61 Magnesium Alloy Gas Atomized Powders via Spark Plasma Sintering, ELSAYED Ayman,IMAI Hisashi,UMEDA Junko,KONDOH Katsuyoshi, Trans. JWRI, Vol. 38, No. 2, p. 31-35, 2009/12
  • Polysaccharide Hydrolysis and Metallic Impurities Removal Behavior of Rice Husks in Citric Acid Leaching Treatment, UMEDA Junko,IMAI Hisashi,KONDOH Katsuyoshi, Trans. JWRI, Vol. 38, No. 2, p. 13-18, 2009/12
  • Development of heat-resistant magnesium composites by bulk mechanical alloying method, Keitaro Enami,Masaki Ohara,Takanori Igarashi,Junji Fujita,Katsuyoshi Kondoh, J. Jpn. Soc. Powder Powder Metallurgy, Vol. 56, No. 12, p. 717-721, 2009/12
  • Cost Effective Pure Titanium with High Mechanical Response by Oxide Dispersion Strengthening, Tomohiro Yoshimura,Hisashi Imai,Thotsaphon Threrujirapapong,Katsuyoshi Kondoh, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 50, No. 12, p. 2751-2756, 2009/12
  • Mechanical Properties of a Titanium Matrix Composite Reinforced with Low Cost Carbon Black via Powder Metallurgy Processing, Thotsaphon Threrujirapapong,Katsuyoshi Kondoh,Hisashi Imai,Junko Umeda,Bunshi Fugetsu, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 50, No. 12, p. 2757-2762, 2009/12
  • Evaluation of Fatigue Properties of Extruded Mg-Al-Zn Magnesium Alloys by Axial Loading and Rotating Bending Fatigue Tests, Y. Miyashita,Y. Ochi,S. Ishihara,K. Kondoh,N. Aoyagi,Y. Furuya,H. Hirukawa,S. Kamado, Proc. Magnesium: 8th International Conference on Magnesium Alloys and their Applications, p. 788-794, 2009/10
  • Phase Changes in Fabrication of Powder Metallurgy Magnesium Composites Reinforced with Calcium Oxides via Heat Treatment at Elevated Temperature, J. Fujita,K. Kondoh,K. Enami,M. Ohara,T. Igarashi, Proc. Magnesium: 8th International Conference on Magnesium Alloys and their Applications, p. 824-829, 2009/10
  • Improved Mechanical Response of Hot Extruded SWAP Mg-Al-Zn-Ca Powder with Different Rare-Earth Element Additions, A. Elsayed,H. Imai,J. Umeda,K. Kondoh, Proc. Magnesium: 8th International Conference on Magnesium Alloys and their Applications, p. 758-763, 2009/10
  • Microstructural and Mechanical Properties of Magnesium Matrix Composite Reinforced with Titanium Powders via Powder Metallurgy Process, K. Kondoh,M. Kawakami,J. Umeda,H. Imai,H. Fujii, Proc. Magnesium: 8th International Conference on Magnesium Alloys and their Applications, p. 668-675, 2009/10
  • Grain Refining and Oxide Dispersion Strengthening of Pure Titanium, Tomohiro Yoshimura,Hisashi Imai,Katsuyoshi Kondoh, JOURNAL OF THE JAPAN INSTITUTE OF METALS, JAPAN INST METALS, Vol. 73, No. 10, p. 768-772, 2009/10
  • Solid-state Reaction of CaO Particles Dispersed in Powder Metallurgy Magnesium Composites, FUJITA Junji,ENAMI Keitaro,OHARA Masaki,IGARASHI Takanori,KONDOH Katsuyoshi, Trans. JWRI, Vol. 38, No. 1, p. 31-35, 2009/09
  • Mechanical Properties and Machinability of Extruded Cu-40%Zn Brass Alloys with Bismuth via Powder Metallurgy Process, IMAI Hisashi,LI shufeng,ATSUMI Haruhiko,KOSAKA Yoshiharu,KOJIMA Akimichi,UMEDA Junko,KONDOH Katsuyoshi, Trans. JWRI, Vol. 38, No. 1, p. 25-30, 2009/09
  • Effect of Different La Additions on the Microstructure and Mechanical Properties of Hot Extruded SWAP Mg-Al-Zn-Ca Powder, ELSAYED Ayman,KONDOH Katsuyoshi,IMAI Hisashi,UMEDA Junko, Trans. JWRI, Vol. 38, No. 1, p. 19-23, 2009/09
  • Titanium Matrix Composite Reinforced with In-situ Formed TiC Using Carbon Black Nano Particles via a Wet Process, THRERUJIRAPAPONG Thotsaphon,KONDOH Katsuyoshi,IMAI Hisashi,UMEDA Junko,FUGETSU Bunshi, Trans. JWRI, Vol. 38, No. 1, p. 13-17, 2009/09
  • Cavitation erosion of aluminum matrix sintered composite with AlN dispersoids, Katsuyoshi Kondoh,Junko Umeda,Ryuzo Watanabe, WEAR, ELSEVIER SCIENCE SA, Vol. 267, No. 9-10, p. 1511-1515, 2009/09
  • Structure and Property of Zr-Cu Binary Amorphous Films Deposited by Sputtering Process, Junji Fujita,Tadashi Serikawa,Katsuyoshi Kondoh,Hisamiti Kimura,Akihisa Inoue, Proceedings of Processing Materials for Properties, p. 1157-1162, 2009/09
  • Composite Metal Powder Coated with Un-Bundled Carbon Nanotube (CNT) and Characteristics of Its Extruded Material, Hisashi Imai,Katsuyoshi Kondoh,Hiroyuki Fukuda,Bunshi Fugetsu, Proceedings of Processing Materials for Properties, p. 883-888, 2009/09
  • Rapidly Solidified Magnesium Alloy Coarse Powder by SWAP and Characteristics of Its Wrought Alloy, Katsuyoshi Kondoh,EL-Sayed Ayman Hamada,Hiroyuki Fukuda,Masashi Kawakami,Hisashi Imai,Junko Umeda, Proceedings of The Third International Conference of Processing Materials for Properties (PMP-III), MMIJ Session in Sapporo 2009, p. 913-918, 2009/09
  • 217 Solid-state recycle of machined chips from wrought magnesium alloys used for ETC gate bar, Katsuyoshi KONDOH,Kantaro KANEKO,Mitsuji UEDA, The Proceedings of the Symposium on Environmental Engineering, Japan Society of Mechanical Engineers, Vol. 2009.19, No. 0, p. 179-181, 2009/07
  • Enhanced impact toughness of magnesium alloy by grain refinement, Jinsun Liao,Makoto Hotta,Kantaro Kaneko,Katsuyoshi Kondoh, SCRIPTA MATERIALIA, PERGAMON-ELSEVIER SCIENCE LTD, Vol. 61, No. 2, p. 208-211, 2009/07
  • Fatigue strength and fatigue crack growth behavior of extruded AZ31 magnesium alloy via RCP process, Yoshiaki Shimotsuya,Kazuya Satoh,Motojiro Sugisawa,Yukio Miyashita,Katsuyoshi Kondoh,Yoshiharu Mutoh, Proceedings of Asian Symposium on Materials and Processing 2009 (ASMP2009), 2009/06
  • Initial Evaluation of Advanced Powder Metallurgy Magnesium Alloys for Armor Development, Tyrone Jones,Katsuyoshi Kondoh, Journal of Army Research Laboratory, 2009/06
  • Characteristics of powder metallurgy pure titanium matrix composite reinforced with multi-wall carbon nanotubes, Katsuyoshi Kondoh,Thotsaphon Threrujirapapong,Hisashi Imai,Junko Umeda,Bunshi Fugetsu, COMPOSITES SCIENCE AND TECHNOLOGY, ELSEVIER SCI LTD, Vol. 69, No. 7-8, p. 1077-1081, 2009/06
  • Estimation of Compositions of Zr-Cu Binary Sputtered Film and Its Characterization, Katsuyoshi Kondoh,Junji Fujita,Junko Umeda,Tadashi Serikawa, Advances in Materials Science and Engineering, Vol. 2008, 2009/04
  • Corrosion Characteristics of Extruded P/M AZ31 Alloy Produced by SWAP, Takahito Kawamura,Satoshi Sunada,Katsuyoshi Kondoh,Kazuhiko Majima, JOURNAL OF THE JAPAN INSTITUTE OF METALS, JAPAN INST METALS, Vol. 73, No. 3, p. 189-197, 2009/03
  • Machinable Cu-40%Zn Composites Containing Graphite Particles by Powder Metallurgy Process, K. Kondoh,H. Imai,Y. Kosaka,A. Kojima,J. Umeda, Journal of Metallurgy, Vol. 2009, 2009/03
  • Roll Compactionプロセスによる組織制御, 近藤勝義, 塑性と加工, Vol. 50, No. 578, p. 197-200, 2009/03
  • Friction and wear behavior of sintered magnesium composite reinforced with CNT-Mg2Si/MgO, Junko Umeda,Katsuyoshi Kondoh,Hisashi Imai, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, Vol. 504, No. 1-2, p. 157-162, 2009/03
  • The In-Situ Fabrication of Ai-A1N Composites from Metal Powders and their Resistance to Wear and Cavitation, Ma Qian,K. Kondoh,D. Kent,J. Umeda,P. Yu,G. B. Schaffer, LIGHT METALS TECHNOLOGY 2009, TRANS TECH PUBLICATIONS LTD, Vol. 618-619, p. 617-+, 2009
  • Microstructural and Mechanical Properties of Titanium Matrix Composites Reinforced with Nano Carbon Materials via Powder Metallurgy Process, Katsuyoshi Kondoh,Thotsaphon Threrujirapapong,Junko Umeda,Hisashi Imai,Bunshi Fugetsu, LIGHT METALS TECHNOLOGY 2009, TRANS TECH PUBLICATIONS LTD, Vol. 618-619, p. 495-+, 2009
  • Magnesium Matrix Composites Reinforced with Titanium Particles, Katsuyoshi Kondoh,Masashi Kawakami,Junko Umeda,Hisashi Imai, LIGHT METALS TECHNOLOGY 2009, TRANS TECH PUBLICATIONS LTD, Vol. 618-619, p. 371-375, 2009
  • High Performance Recycling of Agricultural Wastes: Rice Husk Silica Used as Reinforcements of Magnesium Sintered Materials, Katsuyoshi Kondoh,Junko Umeda,Hisashi Kawakami,Hisashi Imai, EPD CONGRESS 2009, PROCEEDINGS, MINERALS, METALS & MATERIALS SOC, p. 885-888, 2009
  • Initial Evaluation of Advanced Powder Metallurgy Magnesium Alloys for Dynamic Applications, Tyrone Jones,Katsuyoshi Kondoh, MAGNESIUM TECHNOLOGY 2009, MINERALS, METALS & MATERIALS SOC, p. 185-+, 2009
  • Mechanical Properties of Powder Metallurgy Titanium Alloys Dispersed with Carbon Nano Particles, Katsuyoshi Kondoh,Thotsaphon Threrujirapapong,Hisashi Imai,Junko Umeda,Bunshi Fugetsu, TMS 2009 138TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 3: GENERAL PAPER SELECTIONS, MINERALS, METALS & MATERIALS SOC, p. 59-+, 2009
  • Cavitation resistance of powder metallurgy aluminum matrix composite with AlN dispersoids, Katsuyoshi Kondoh,Junko Umeda,Ryuzo Watanabe, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, Vol. 499, No. 1-2, p. 440-444, 2009/01
  • Environmental Benign Brass Alloys Dispersed with Graphite Particles Fabricated Via Solid-State Sintering Process, KONDOH Katsuyoshi,IMAI Hisashi,UMEDA Junko,KOSAKA Yoshiharu,KOJIMA Akimichi, Trans. JWRI, Vol. 37, No. 2, p. 87-89, 2008/12
  • Friction and Wear Behavior of Titanium Matrix Composite Reinforced with Carbon Nanotubes under Dry Conditions, THRERUJIRAPAPONG Thotsaphon,KONDOH Katsuyoshi,UMEDA Junko,IMAI Hisashi, Trans. JWRI, Vol. 37, No. 2, p. 51-56, 2008/12
  • Mechanical Characteristics of Hot Extruded Non-Combustible Magnesium Alloy using Water Atomized Powder, ELSAYED Ayman,KONDOH Katsuyoshi,IMAI Hisashi,UMEDA Junko,KAWAKAMI Masashi, Trans. JWRI, Vol. 37, No. 2, p. 43-49, 2008/12
  • Tribological Response of Powder Metallurgy Magnesium Composite Containing Reactive Amorphous Silica Particles with Porous Structure and Multi-Wall Carbon Nanotubes, UMEDA Junko,KONDOH Katsuyoshi,IMAI Hisashi,FUGETSU Bunshi, Trans. JWRI, Vol. 37, No. 2, p. 37-42, 2008/12
  • Microstructural and Phase Analysis of Zirconium and Copper Binary Thin Film Sputtered by using Elemental Composite Targets, KONDOH Katsuyoshi,FUJITA Junji,UMEDA Junko,IMAI Hisashi,SERIKAWA Tadashi, Trans. JWRI, Vol. 37, No. 2, p. 33-36, 2008/12
  • Basics of Powder Compaction and Material Processing II: Powder Forming Process for Microstructure Control, K. Kondoh, Journal of the Society of Materials Science, Japan, Vol. 57, No. 12, p. 1261-1265, 2008/12
  • Structural Characteristics and Crystallization of Metallic Glass Sputtered Films by Using Zr System Target, K. Kondoh,K. Kawabata,T. Serikawa,H. Kimura, Research Letters in Materials Science, Vol. 2008, p. Article ID 312057-Article ID 312057, 2008/12
  • Development of knee ankle foot orthosis made of magnesium alloy with high strength and toughness, K. Kaneko,A. Koshi,Y. Matsuda,K. Kondoh, Journal of Japan Institute of Light Metals, Vol. 58, No. 11, p. 617-621, 2008/11
  • High-purity amorphous silica originated in rice husks via carboxylic acid leaching process, Junko Umeda,Katsuyoshi Kondoh, JOURNAL OF MATERIALS SCIENCE, SPRINGER, Vol. 43, No. 22, p. 7084-7090, 2008/11
  • 放電焼結法を用いた60Cu-40Zn黄銅合金粉末押出材の特性, 今井 久志,近藤 勝義,上坂 美治,小島 明倫,片野 元,梅田 純子, 粉体および粉末冶金, Vol. 55, No. 10, p. 743-749, 2008/10
  • Composite magnesium powder coated with un-bundled carbon nanotubes(CNT) and characteristics of its extruded material, H. Fukuda,H. Imai,K. Kondoh,B. Fugetsu, Proc. 2008 JSME International Conference on Materials and Processing(ICM&P2008), 2008/10
  • High strengthened and texture controlled P/M magnesium alloys and their isotropic tensile properties, K. Kondoh, Proc. 2008 JSME International Conference on Materials and Processing(ICM&P2008), 2008/10
  • Amorphous silica originated from rice husks and its characteristics, K. Kondoh,J. Umeda, Proc. 2008 JSME International Conference on Materials and Processing(ICM&P2008), 2008/10
  • Environmentally Benign Process of High Purity Amorphous Silica Originated in Rice Husks of Agricultural Wastes, J. Umeda,K. Kondoh,Y. Michiura, Proc. 2008 Global Symposium on Recycling, Waste Treatment and Clean Technology (REWAS 2008), TMS, p. 1493-1498, 2008/10
  • Advanced Solid-State Recycle of Magnesium Alloy Wastes by Repetitive Severe Plastic Working for High-Strengthened Wrought Materials, K. Kondoh,K. Kawabata,J. Umeda,K. Kaneko,M. Ueda, Proc. 2008 Global Symposium on Recycling, Waste Treatment and Clean Technology (REWAS 2008), TMS, p. 815-820, 2008/10
  • Electrochemical Impedance Characteristics of AZ31 Mg Alloy under SSRT Condition, Takahito Kawamura,Satoshi Sunada,Katsuyoshi Kondoh,Hisakimi Notoya,Kazuhiko Majima, J. Japan Inst. Metals, Vol. 72, No. 9, p. 667-673, 2008/09
  • Mechanical Properties of P/M Pure Ti with CNT/TiC Nano Composite Structure, T. Threrujirapapong,K. Kondoh,H. Imai,J. Umeda, 5th Thailand Materials Science and Technology Conference (MSAT-5), p. 304-306, 2008/09
  • Mechanical Behavior of Powder Metallurgy Extruded AZ31B Alloys by Microstructure and Texture Control via Roll-Compaction Process, K. Kondoh,H. Imai, 5th Thailand Materials Science and Technology Conference (MSAT-5), p. 163-165, 2008/09
  • Environmentally Benign Pb-free Cu-Zn Alloys Dispersed with Graphite Particles via Powder Metallurgy Processing and Their Mechanical Properties, K. Kondoh,H. Imai, 5th Thailand Materials Science and Technology Conference (MSAT-5), p. 157-159, 2008/09
  • Reactivity of Magnesium and High-purity Silica Originated in Rice Husks, J. Umeda,K. Kondoh,M. Kawakami,H. Imai, 5th Thailand Materials Science and Technology Conference (MSAT-5), p. 54-56, 2008/09
  • Solid State Synthesis of Mg2Si/MgO Composites from an Elemental Mixture Powder of Magnesium and Rice Husk Silica, UMEDA Junko,KONDOH Katsuyoshi,KAWAKAMI Masashi,IMAI Hisashi, Trans. JWRI, Vol. 37, No. 1, p. 113-117, 2008/09
  • Structures of Metallic Glass Sputtered Films by Using Zr-Al-Ni-Cu Alloy Targets, KONDOH Katsuyoshi,KAWABATA Kenshi,SERIKAWA Tadashi,KIMURA Hisamichi, Trans. JWRI, Vol. 37, No. 1, p. 109-112, 2008/09
  • Microstructures and Mechanical Properties of Powder Metallurgy Pure Ti Composite Reinforced with Carbon Nanotubes, THRERUJIRAPAPONG Thotsaphon,KONDOH Katsuyoshi,IMAI Hisashi,UMEDA Junko,FUGETSU Bunshi, Trans. JWRI, Vol. 37, No. 1, p. 57-61, 2008/09
  • Characteristics of Lead-Free P/M Cu60-Zn40 Brass Alloys with Graphite, IMAI Hisashi,KONDOH Katsuyoshi,KATANO Gen,KOSAKA Yoshiharu,KOJIMA Akimichi, Trans. JWRI, Vol. 37, No. 1, p. 51-55, 2008/09
  • Wear Behavior of Sintered Magnesium Matrix Composites Reinforced with Mg2Si Particle under Wet Sliding Conditions, KONDOH Katsuyoshi,UMEDA Junko,KAWABATA Kenshi,SEKI Yoshikazu,KAWAMURA Yoshihito, Trans. JWRI, Vol. 37, No. 1, p. 45-49, 2008/09
  • Process Optimization to Prepare High-purity Amorphous Silica from Rice Husks via Citric Acid Leaching Treatment, UMEDA Junko,KONDOH Katsuyoshi, Trans. JWRI, Vol. 37, No. 1, p. 13-17, 2008/09
  • Characteristics of Sintered Metal Matrix Composite Reinforced with Un-bundled Carbon Nanotubes, K.Kondoh,B.Fugetsu, Alutopia, Vol. 38, No. 8, p. 9-16, 2008/08
  • 金属との複合化におけるカーボンナノチューブの真の機能発現, 近藤 勝義, ケミカルエンジニヤリング, 化学工業社, Vol. 53, No. 6, p. 65-71, 2008/06
  • Characteristics of Hot-Extruded Aluminum Alloy in Using Rapidly Solidified Powder via SWAP, M. Kawakami,K. Kondoh,H. Imai, Proceedings of the 2008 World Congress on Powder Metallurgy & Particulate Materials(PM2008), 2008/06
  • Microstructure Observation on Composite Metal Powder Coated by CNT and Characteristics of Hot Extruded Composite Alloys Dispersed with CNT, H. Imai,H. Fukuda,K. Kondoh, Proceedings of the 2008 World Congress on Powder Metallurgy & Particulate Materials(PM2008), 2008/06
  • Anisotropy of Texture-Controlled PM Magnesium Alloys via Roll-Compaction Process, K. Kondoh,T. Oguri,H. Imai, Proceedings of the 2008 World Congress on Powder Metallurgy & Particulate Materials(PM2008), 2008/06
  • 金属との複合化におけるカーボンナノチューブの真の機能発現, 近藤勝義, ケミカルエンジニヤリング, 化学工業社, Vol. 53, No. 6, p. 473-479, 2008/06
  • Development of Magnesium Alloy Composites by Bulk Mechanical Alloying Process, Keitaro Enami,Yukitoshi Fujita,Yoshitsugu Motoe,Masaki Ohara,Takanori Igarashi,Katsuyoshi Kondoh, J. Jpn. Soc. Powder Powder Metallurgy, Vol. 55, No. 4, p. 244-249, 2008/04
  • Characteristics of Hot Extruded A7075 Aluminum Alloy Made of Rapidly Solidified Powder via SWAP., Masashi Kawakami,Katsuyoshi Kondoh,Hisashi Imai,Isamu Otsuka,Hiroshi Izaki, Smart Processing Technology, Vol. 2, p. 251-254, 2008/03
  • Solid-state Recycle of In-house Machined Mg Chips by Severe Plastic Working, Katsuyoshi Kondoh,Norio Fujii,Kantarou Kaneko,Mitsuji Ueda, Smart Processing Technology, Vol. 2, p. 87-90, 2008/03
  • Characteristics of High-Purity Amorphous Silica Originated in Rice Husks, Katsuyoshi Kondoh,Junko Umeda,Yoshisada Michiura, Smart Processing Technology, Vol. 2, p. 79-82, 2008/03
  • Influence of al content on corrosion characteristics of AZ series Mg alloys, Takahito Kawamura,Satoshi Sunada,Hisakimi Notoya,Katsuyoshi Kondo,Kazuhiko Majima, JOURNAL OF THE JAPAN INSTITUTE OF METALS, JAPAN INST METALS, Vol. 72, No. 3, p. 216-223, 2008/03
  • CNTs/TiC Reinforced Titanium Matrix Nanocomposites via Powder Metallurgy and Its Microstructural and Mechanical Properties, Katsuyoshi Kondoh,Thotsaphon Threrujirapapong,Hisashi Imai,Junko Umeda,Bunshi Fugetsu, JOURNAL OF NANOMATERIALS, HINDAWI PUBLISHING CORPORATION, Vol. 2008, 2008
  • Microstructures and mechanical properties of magnesium composite alloys dispersed with carbon nanotube via powder metallurgy process, Katsuyoshi Kondoh,Hiroyuki Fukuda,Hisashi Imai,Bunshi Fugetsu, MAGNESIUM TECHNOLOGY 2008, MINERALS, METALS & MATERIALS SOC, p. 289-291, 2008
  • Comparative Study of Mg-Si Films Deposited by DC- and RF- Glow Discharge Sputtering, SERIKAWA Tadashi,KAWABATA Kenshi,KONDOH Katsuyoshi, Trans. JWRI, Vol. 36, No. 2, p. 39-43, 2007/12
  • Characteristics of Hot Extruded P/M Aluminum Alloy when Using the Rapidly Solidified Powder SWAP Process, IMAI Hisashi,KAWAKAMI Masashi,KONDOH Katsuyoshi,OTSUKA Isamu,IZAKI Hiroshi, Trans. JWRI, Vol. 36, No. 2, p. 33-38, 2007/12
  • Local Appearance of Sn Liquid Phase at Surface of Aluminum Alloy Powder during Heating, KONDOH Katsuyoshi,LUAGNVARANAUNT Tachai,THRERUJIRAPAPONG Thotsaphon,KIMURA Atsushi, Trans. JWRI, Vol. 36, No. 2, p. 29-32, 2007/12
  • Environmentally Benign Reuse of Agricultural Wastes to Prepare High-Purity Silica from Rice Husks, UMEDA Junko,KONDOH Katsuyoshi,MICHIURA Yoshisada, Trans. JWRI, Vol. 36, No. 2, p. 17-21, 2007/12
  • Process parameters optimization in preparing high-purity amorphous silica originated from rice husks, Junko Umeda,Katsuyoshi Kondoh,Yoshisada Michiura, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 48, No. 12, p. 3095-3100, 2007/12
  • Zr-Cu, Zr-Ni and Zr-Al Binary Films Deposited by Planar Magnetron Sputtering, T. Serikawa,K. Kawabata,K. Kondoh,H. Kimura,A. Inoue, Materials Science Forum, Vol. 561-565, No. 1, p. 1734-1737, 2007/11
  • Utilization of Bio-Silica Prepared from Rice Husks as Reinforcements of Magnesium Alloys, K.Kondoh,J.Umeda,H.Oginuma, Proceeding of The 2nd Workshop on the Utilization of Rice Husk and Rice Husk Silica, 2007/07
  • Optimization of Process Parameters to Prepare High-purity Amorphous Silica from Rice Husks, J.Umeda,K. Kondoh,Y.Michiura, Proceeding of The 2nd Workshop on the Utilization of Rice Husk and Rice Husk Silica, 2007/07
  • Directly Recycling Process Of Magnesium Wasted Chips For High Strengthened Wrought Alloys Via Severe Plastic Working, K.Kondoh,K.Kawabata,K.Kaneko,N.Fujii,K.Tani,M.Ueda, Advances in Eco-materials, Vol. 2, p. 381-388, 2007/07
  • Characteristics Of High-Purity Amorphous Silica In Rice Husks, K.Kondoh,J.Umeda,H.Oginuma,Y.Michiura, Advances in Eco-materials, Vol. 1, p. 153-160, 2007/07
  • Fabrication of Al-Fe alloys by Repeated Compaction and Extrusion of Mixture of Elemental Powders, T.Luangvaranunt,T.Threrujirapapong,S.Danchaivijit,K.Kondoh, Journal of Solid Mechanics and Materials Engineering, Vol. 1, No. 7, p. 931-937, 2007/07
  • Fabrication of Al/Al2O3 composite by powder forging of aluminum powders and manganese oxide powders, T. Luangvaranunt,L. Tamrongpoowadon,K. Kondoh, Proc. the 16th International Conference on Composite Materials, p. 48-49, 2007/07
  • Corrosion Characteristics of Magnesium Alloys Produced by Several Method, S.Sunada,T.Kawamura,K.Kondoh,H.Notoya,K.Majima, Journal of the Japan Society Powder and Powder Metallurgy, Vol. 54, No. 9, p. 658-664, 2007/07
  • Mg-C films deposited by radio-frequency sputtering, K.Kondoh,T.Serikawa,K.Kawabata,T.Yamaguchi, Scripta Materialia, Vol. 57, p. 489-491, 2007/05
  • Removal of adsorbed moisture on iron powders by rice husk ash, T. Luangvaranunt,S. Jearwun,K. Kondoh, Journal of Metals, Materials and Minerals, Vol. 17, No. 1, p. 47-52, 2007/04
  • Mechanical Properties and Texture of Hot Extruded Magnesium Alloys via RCP Process in Using Coarse Raw Powder, K. Kondoh,K. Kawabata,H. Oginuma, Magnesium Technology 2007, p. 433-436, 2007/02
  • Electrochemical dissolution characteristics of magnesium alloy produced by roll compaction process, Satoshi Sunada,Takahito Kawamura,Katsuyoshi Kondo,Hisakimi Notoya,Kazuhiko Majima, PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3, TRANS TECH PUBLICATIONS LTD, Vol. 561-565, p. 2143-+, 2007
  • A Comparative Study of Carbon Additives on Grain Refinement of Magnesium Alloys, P. Cao,M. Qian,K. Kondoh,D. H. StJohn, International Foundry Research, Vol. 58, No. 4, p. 18-22, 2006/12
  • Analysis of Warm Compaction Behavior of Iron Powder Particles via Cooper-Eaton Equation, KONDOH Katsuyoshi,WATANABE Ryuzo, Transactions of JWRI, Vol. 35, No. 2, p. 47-51, 2006/12
  • Microstructures and Mechanical Properties of Extruded AZ31 Mg Alloy Processed by Roll-Compaction Process, K. Kawabata,H. Oginuma,K. Kondoh, Proceeding of the 7th International Conference on Magnesium Alloys and Their Applications, p. 113-118, 2006/11
  • A Comparative Study of Carbon Additives on Grain Refinement of Magnesium Alloys, P.Cao,Ma Qian,K.Kondoh,D.H.StJohn, Proceeding of the 7th International Conference on Magnesium Alloys and Their Applications, p. 8-13, 2006/11
  • Environmentally Benign Process of High-strengthened Magnesium Alloy, Journal of The Japan Society for Technology of Plasticity, Vol. 47, No. 551, p. 1187-1190, 2006/10
  • 粉体プロセスによるマグネシウム合金の微細組識制御と高強靭性化, 近藤勝義, 粉体工学会誌, Vol. 43, No. 6, p. 450-456, 2006/04
  • Depositions and microstructures of Mg-Si thin film by ion beam sputtering, T Serikawa,M Henmi,T Yamaguchi,H Oginuma,K Kondoh, SURFACE & COATINGS TECHNOLOGY, ELSEVIER SCIENCE SA, Vol. 200, No. 14-15, p. 4233-4239, 2006/04
  • 加工技術 粉体プロセスによる高強靱性マグネシウム展伸材料 (特集:マグネシウムの注目技術), 近藤 勝義, アルトピア, Vol. 36, No. 2, p. 9-15, 2006/02
  • 粉体プロセスによる高強靭性マグネシウム展伸材料, 近藤勝義, アルトピア, The Japan Journal, Vol. 36, No. 2, p. 9-15, 2006/02
  • Surface Modification of Magnesium Alloys in Employing Pulse Electric Current Heating, Takashi Yamaguchi,Katsuyoshi Kondoh, Journal of the Japan Society of Powder and Powder Metallurgy, Japan Society of Powder and Powder Metallurgy, Vol. 53, No. 6, p. 497-502, 2006
  • 高強靭性マグネシウム合金の環境軽負荷型製造技術の開発, 金子 貫太郎,塩崎 修司,近藤 勝義,荻沼 秀樹,秋田 亨, まてりあ, Japan Institute of Metals, Vol. 45, No. 1, p. 54-56, 2006/01
  • More Over,Aluminum, K. Kondoh, The Japan Journal, Advancing Science, Vol. 2, No. 9, p. 27-27, 2006/01
  • Mg2Si coating technology on magnesium alloys to improve corrosion and wear resistance, T. Yamaguchi,T. Serikawa,M. Henmi,H. Oginuma,K. Kondoh, Mater. Trans., Vol. 47, No. 4, p. 1026-1030, 2006/01
  • High-Strengthened Magnesium Alloys by Employing Coarse Powder with Refined Grains, K. Kondoh,H. Oginuma,M. Sumida,S. Shiozaki,Y. Goho, 1st Asian Symposium on Magnesium Alloys, 2005/11
  • In-situ synthesis of Ti matrix composite reinforced with dispersed Ti5Si3 particles via spark plasma sintering, M. Sumida,K. Kondoh, Mater. Trans., Vol. 46, No. 10, p. 2135-2141, 2005/11
  • Grain-Refining Process Of Magnesium Alloys Via Repeated Plastic Working, K. Kondoh,H. Oginuma,M. Sumida, 12th International Metallurgy-Materials Congress, 2005/10
  • イオンビームスパッタによるMg-Si薄膜形成, 芹川正,逸見百子,山口貴嗣,荻沼秀樹,近藤勝義, 日本金属学会誌, Vol. 69, No. 1, p. 31-35, 2005/08
  • Innovative reuse of agricultural wastes as industrial raw materials to form magnesium composites, K. Kondoh,H. Oginuma,J. Umeda,Y. Oki,T. Umeda, MATERIALS TRANSACTIONS, Vol. 46, No. 12, p. 2586-2591, 2005/07
  • Mg-Si Coating Deposited by Glow Discharge Sputtering in Employing Mg2Si Sintered Materials, K. Kondoh,T. Serikawa,H. Oginuma,K. Nakamura,Y. Michiura,T. Yamaguchi, American Society of Mechanical Engineers (ASME), 2005/06
  • High-Strengthened Magnesium Alloys by Employing Coarse Powder with Refined Grains, K. Kondoh,M. Sumida,H. Oginuma,K. Kaneko,S. Shiozaki,S. Nishigori,Y. Goho, Metal Powder Industries Federation (MPIF), 2005/06
  • Surface Modification of Magnesium Alloy by Mg2Si Coating Technology, K. Kondoh,T. Serikawa,H. Oginuma,T. Yamaguchi, Metal Powder Industries Federation (MPIF), 2005/06
  • Surface Modification of Magnesium Alloy by Mg2Si Coating Technology, K. Kondoh,T. Yamaguchi,T. Serikawa,H. Oginuma, JSME International Journal, Series A, Vol. 48, No. 4, p. 364-268, 2005/06
  • Mg2Si粒子添加によるマグネシウム基複合材料の作製およびその機械的特性, 荻沼秀樹,近藤勝義,住田雅樹,湯浅栄二, 粉体および粉末冶金, Vol. 52, p. 282-286, 2005/04
  • 放電プラズマ焼結法によるMg-Si金属間化合物の作製, 荻沼秀樹,近藤勝義,山口貴嗣,湯浅栄二, 粉体および粉末冶金, Vol. 52, p. 79-83, 2005/04
  • Mg2Si焼結体を用いたマグネシウム合金へのMg-Si成膜プロセスと皮膜特性, 山口貴嗣,近藤勝義,芹川正,逸見百子,荻沼秀樹, 粉体および粉末冶金, Vol. 52, No. 4, p. 276-281, 2005/04
  • Thermal behavior of AZ31 and Si in solid state synthesis of Mg2Si, R. Tsuzuki,K. Kondoh,M. Ishihara,E. Yuasa, 粉体および粉末冶金, Vol. 51, p. 736-740, 2005/04
  • Materials and processing designs for high-performance magnesium alloys, K Kondoh,R Tsuzuki,WB Du,S Kamado, PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, TRANS TECH PUBLICATIONS LTD, Vol. 475-479, p. 453-456, 2005
  • High strength wrought magnesium alloy by employing grain-refined powder, K Kondoh, MAGNESIUM TECHNOLOGY 2005, MINERALS, METALS & MATERIALS SOC, p. 77-80, 2005
  • Solid-state synthesis of magnesium silicide via repeated plastic working and spark plasma sintering., H. OGINUMA,K. KONDOH,T. YAMAGUCHI,E. YUASA, Materials Science Forum, Vol. 475-479, p. 2895-2898, 2004/10
  • Microstructure and Mg concentration of Mg-Si thin film deposited by ion beam sputtering on glass substrate, T Serikawa,M Henmi,K Kondoh, JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, A V S AMER INST PHYSICS, Vol. 22, No. 5, p. 1971-1974, 2004/09
  • Microstructure controlled magnesium alloys via cyclically repeated plastic working, Katsuyoshi Kondoh,Tachai Luangvaranunt,Ritsuko Tsuzuki,Shigeharu Kamado, Magnesium Technology 2004, p. 257-262, 2004/06
  • Materials processing of high-performance magnesium alloys, Katsuyoshi KONDOH, Journal of Japan Institute of Light Metals, Japan Institute of Light Metals, Vol. 54, No. 5, p. 187-191, 2004/05
  • High-performance Materials Processing via Repeated Plastic Working, KONDOH Katsuyoshi, Vol. 45, No. 519, p. 228-232, 2004/04/25
  • Recycle Processing for High-performance Magnesium Alloys Via Repeated Plastic Working and Solid-state Synthesis, KONDOH Katsuyoshi,TSUZUKI Ritsuko,DU Wenbo,KAMADO Shigeharu, Materia Japan, Vol. 43, No. 4, p. 275-280, 2004/04/20
  • New process to fabricate magnesium composites using SiO2 glass scraps, K Kondoh,T Luangvaranunt, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 44, No. 12, p. 2468-2474, 2003/12
  • Preparation of Ultra Fine-Grained Magnesium Alloy by Mechanical Alloying of AZ31 Chip-Aluminum Powder Mixture, Ayako OHGUCHI,Eiji YUASA,Katsuyoshi KONDOH, JSME International Journal Series A, Japan Society of Mechanical Engineers, Vol. 46, No. 3, p. 242-246, 2003/07
  • Environmentally benign fabricating process of magnesium alloy by cyclical plastic working in solid-state, K Kondoh,T Aizawa, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 44, No. 7, p. 1276-1283, 2003/07
  • Mechanical Properties of Mg2Si/Mg Composites via Powder Metallurgy Process, Hiroshi MURAMATSU,Katsuyoshi KONDOH,Eiji YUASA,Tatsuhiko AIZAWA, JSME International Journal Series A, Japan Society of Mechanical Engineers, Vol. 46, No. 3, p. 247-250, 2003/07
  • Magnesium Matrix Composite with Solid-state Synthesized Mg<SUB>2</SUB>Si Dispersoids, Katsuyoshi Kondoh,Hideki Oginuma,Ritsuko Tuzuki,Tatsuhiko Aizawa, MATERIALS TRANSACTIONS, Japan Institute of Metals, Vol. 44, No. 4, p. 611-618, 2003/04
  • Tribological Properties of Magnesium Composite Alloy with <I>In-situ</I> Synthesized Mg<SUB>2</SUB>Si Dispersoids, Katsuyoshi Kondoh,Hideki Oginuma,Tatsuhiko Aizawa, MATERIALS TRANSACTIONS, Japan Institute of Metals, Vol. 44, No. 4, p. 524-530, 2003/03
  • Magnesium research trend in Japan, S Kamado,J Koike,K Kondoh,Y Kawamura, MAGNESIUM ALLOYS 2003, PTS 1 AND 2, TRANS TECH PUBLICATIONS LTD, Vol. 419-4, p. 21-33, 2003
  • Tribological property of Mg composites via powder metallurgy process, H Muramatsu,K Kondoh,T Aizawa,E Yuasa, MAGNESIUM ALLOYS 2003, PTS 1 AND 2, TRANS TECH PUBLICATIONS LTD, Vol. 419-4, p. 801-804, 2003
  • Mechanical alloying of powder mixture of magnesium alloy chips and aluminum., A Ohguchi,H Oginuma,E Yuasa,R Tsuzuki,K Kondoh, THERMEC'2003, PTS 1-5, TRANS TECH PUBLICATIONS LTD, Vol. 426-4, p. 575-580, 2003
  • In-situ solid-state synthesis of Mg2Si/MgO/Mg composites, WB Du,K Kondoh,E Yuasa,R Tsuzuki,T Aizawa, MAGNESIUM ALLOYS 2003, PTS 1 AND 2, TRANS TECH PUBLICATIONS LTD, Vol. 419-4, p. 783-788, 2003
  • Solid state processing of AZ31 alloy from machined chips, T Luangvaranunt,K Kondoh,T Aizawa, POWDER MATERIALS: CURRENT RESEARCH AND INDUSTRIAL PRACTICES III, MINERALS, METALS & MATERIALS SOC, p. 61-61, 2003
  • Solid-state synthesis of Mg2Si intermetallic compound via powder metallurgy process, K Kondoh,E Yuasa,T Aizawa, MAGNESIUM ALLOYS 2003, PTS 1 AND 2, TRANS TECH PUBLICATIONS LTD, Vol. 419-4, p. 745-750, 2003
  • Effect of extrusion conditions on properties of hot extruded Mg composite with Mg2Si dispersions via solid-state synthesis, R Tsuzuki,K Kondoh,WB Du,T Aizawa,E Yuasa, MAGNESIUM ALLOYS 2003, PTS 1 AND 2, TRANS TECH PUBLICATIONS LTD, Vol. 419-4, p. 789-794, 2003
  • Tribological properties of magnesium composite with in-situ formed Mg2Si dispersoids, K Kondoh,H Oginuma,T Aizawa, AFFORDABLE METAL MATRIX COMPOSITES FOR HIGH-PERFORMANCE APPLICATIONS II, MINERALS, METALS & MATERIALS SOC, p. 91-101, 2003
  • Mg alloy composite materials with solid-state synthesized Mg2Si dispersions, K Kondoh,WB Du,R Tsuzuki, METALLURGICAL AND MATERIALS PROCESSING: PRINCIPLES AND TECHNOLOGIES, VOL 1, MINERALS, METALS & MATERIALS SOC, p. 1167-1172, 2003
  • マグネシウム 効果的な技術移転推進による高機能性マグネシウム複合材料の実用化研究 (特集 いまアルミニウム鍛造業界は), 近藤 勝義,杜 文博,都筑 律子, アルトピア, カロス出版, Vol. 32, No. 12, p. 9-15, 2002/12
  • Plasma Nitriding of Cold-pressed and BMA-forged Al Compacts, VISUTTIPITUKUL Patama,AIZAWA Tatsuhiko,KONDOH Katsuyoshi,KUWAHARA Hideyuki, Journal of the Japan Society of Powder and Powder Metallurgy, Japan Society of Powder and Powder Metallurgy, Vol. 49, No. 11, p. 1028-1035, 2002/11/15
  • Intermetallic Compound Produced by Semi-Solid Processing from Al/Ni Powder Mixture and its Mechanical Strength at Elevated Temperature., Eiji Yuasa,Kensuke Morita,Katsuyoshi Kondoh,Tatsuhiko Aizawa, Journal of the Japan Society of Powder and Powder Metallurgy, Japan Society of Powder and Powder Metallurgy, Vol. 49, No. 11, p. 1036-1041, 2002/11
  • 材料開発 国相合成法による高機能性マグネシウム複合材料の開発 (特集 新材料・加工技術で需要を伸ばす マグネシウム合金), 近藤 勝義, 工業材料, 日刊工業新聞社, Vol. 50, No. 8, p. 37-41, 2002/08
  • A Novel Process to Form Al-12 mass%Si Bulk Material from Machined Chips using Bulk Mechanical Alloying, Tachai Luangvaranunt,Katsuyoshi Kondoh,Tatsuhiko Aizawa, MATERIALS TRANSACTIONS, Japan Institute of Metals, Vol. 43, No. 5, p. 1178-1182, 2002/05
  • Solid State Recycling of Recyclable Aluminum Wastes with In-Process Microstructure Control, Tatsuhiko Aizawa,Tachai Luangvaranunt,Katsuyoshi Kondoh, MATERIALS TRANSACTIONS, Japan Institute of Metals, Vol. 43, No. 3, p. 315-321, 2002/03
  • Solid-State Recycle Processing for Magnesium Alloy Waste via Direct Hot Forging, Katsuyoshi Kondoh,Tachai Luangvaranunt,Tatsuhiko Aizawa, MATERIALS TRANSACTIONS, Japan Institute of Metals, Vol. 43, No. 3, p. 322-325, 2002/03
  • 205 Mechanical Properties of Mg_2Si/Mg Composites via Powder Metallurgy Process, Muramatsu Hiroshi,Kondoh Katsuyoshi,Yuasa Eiji,Aizawa Tatsuhiko, JSME Materials and Processing Conference (M&P), The Japan Society of Mechanical Engineers, Vol. 10, No. 1, p. 106-109, 2002
  • 206 Preparation of ultra fine-grained magnesium alloy by mechanical alloying of AZ31 chip-aluminum powder mixture, Ohguchi Ayako,Yuasa Eiji,Kondoh Katsuyoshi, JSME Materials and Processing Conference (M&P), The Japan Society of Mechanical Engineers, Vol. 10, No. 1, p. 110-113, 2002
  • 207 Consolidation of Al-Ni-Zr amorphous alloy powder made by double mechanical alloying and its microstructure and mechanical properties, Tsuzuki Ritsuko,Yuasa Eiji,Kondoh Katsuyoshi,Aizawa Tatsuhiko, JSME Materials and Processing Conference (M&P), The Japan Society of Mechanical Engineers, Vol. 10, No. 1, p. 114-119, 2002
  • Synthesis of Intermetallic Compound in Isochronal Heating of Al/Ni Powder Mixture and its Forming., Eiji Yuasa,Kosuke Yamaguchi,Katsuyoshi Kondou,Tatsuhiko Aizawa, Journal of the Japan Society of Powder and Powder Metallurgy, Japan Society of Powder and Powder Metallurgy, Vol. 49, No. 1, p. 52-57, 2002/01
  • Solid-state recycling of AZ91D magnesium alloy chips., Katsuyoshi KONDOH,Tachai LUANGVARANUNT,Tatsuhiko AIZAWA, Journal of Japan Institute of Light Metals, Japan Institute of Light Metals, Vol. 51, No. 10, p. 516-520, 2001/10
  • Influences of Powder Characteristic and Compacting Condition on Solid-State Synthesis of Mg2Si., Katsuyoshi Kondoh,Hideki Oginuma,Eiji Yuasa,Tatsuhiko Aizawa,Atsushi Kimura, Journal of the Japan Society of Powder and Powder Metallurgy, Japan Society of Powder and Powder Metallurgy, Vol. 48, No. 9, p. 816-823, 2001/09
  • Solid State Recycling from Green Wastes to Aluminum Alloys with High Material Efficiency, Tatsuhiko Aizawa,Tachai Luangvaranunt,Katsuyoshi Kondoh, Journal of the Japan Institute of Metals, Japan Institute of Metals, Vol. 65, No. 7, p. 581-588, 2001/07
  • アルミニウム粉末の直接窒化反応によるAlNの生成 (特集 ナイトライドセラミックスの新展開(2)), 近藤 勝義, マテリアルインテグレ-ション, ティ-・アイ・シ-, Vol. 14, No. 7, p. 19-25, 2001/07
  • Morphology-free processing of magnesium alloys, K Kondoh,T Luangvaranunt,T Aizawa, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 42, No. 7, p. 1254-1257, 2001/07
  • Gas nitriding of magnesium-titanium alloys fabricated by bulk mechanical alloying, T Luangvaranunt,P Visuttipitukul,K Kondoh,H Kuwahara,T Aizawa, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 42, No. 7, p. 1312-1316, 2001/07
  • Solid-State Synthesis of Mg<SUB>2</SUB>Si from Mg-Si Mixture Powder, Katsuyoshi Kondoh,Hideki Oginuma,Eiji Yuasa,Tatsuhiko Aizawa, MATERIALS TRANSACTIONS, Japan Institute of Metals, Vol. 42, No. 7, p. 1293-1300, 2001/06
  • Behavior of magnesium and tin at the surface of aluminum-silicon-magnesium-tin alloy powder particles at elevated temperature and their effect on direct nitriding reaction, K Kondoh,A Kimura,Y Takeda,R Watanabe, JOURNAL OF THE JAPAN INSTITUTE OF METALS, JAPAN INST METALS, Vol. 64, No. 11, p. 1106-1112, 2000/11
  • Breakaway behavior of surface oxide film on aluminum-silicon-magnesium alloy powder particles at high temperature in a vacuum, A Kimura,K Kondoh,M Shibata,R Watanabe, JOURNAL OF THE JAPAN INSTITUTE OF METALS, JAPAN INST METALS, Vol. 64, No. 4, p. 227-233, 2000/04
  • Optimum Heat Input Control in Arc Welding on Small Sized Pipes, KONDOH Katsuyoshi,UEDA Keiji,OHJI Takayoshi, quarterly journal of the Japan Welding Society, Japan Welding Society, Vol. 15, No. 3, p. 494-501, 1997/08/05
  • An Optimal Heat Input Control of Arc Welding : Optimization of Process Parameters in Arc Welding (2nd Report), OHJI Takayoshi,KONDO Katsuyoshi,NISHIGUCHI Kimiyuki,MORIYASU Masaharu,HIRAMOTO Seigo,SHIMADA Wataru, quarterly journal of the Japan Welding Society, Japan Welding Society, Vol. 8, No. 2, p. 3-9, 1990/05/05
  • An Algorithm for Optimal Heat Input Control : Optimization of process parameters in Arc Welding (1st Report), OHJI Takayoshi,KONDO Katsuyoshi,NISHIGUCHI Kimiyuki, quarterly journal of the Japan Welding Society, Japan Welding Society, Vol. 8, No. 1, p. 48-53, 1990/02/05

Misc.

  • Additively Manufactured Titanium-Iron Alloys as a Recycling Pathway, J. Huang,A. Issariyapat,S. Kariya,J. Umeda,K. Kondoh, MRM2023, Kyoto, 2023/12
  • Manufacturability of superior mechanical properties of titanium by tungsten dissolution via laser processing, A. Issariyapat,S. Kariya,J. Umeda,K. Kondoh, MRM2023, Kyoto, 2023/12
  • Columnar Grains Formation in L-PBF Prepared Single α Ti-C Alloys, Shota KARIYA,Hiroki HANADA,Takuma TERAMAE,junko UMEDA,Katsuyoshi KONDOH, The 1st International conference on Creation of Materials by Superthermal Field 2023, Osaka, 2023/11
  • 機械学習を援用したTi-Fe二相合金における強化因子の特定, 平子 綾音,刈屋 翔太,梅田 純子,近藤 勝義, 粉体粉末冶金協会2023年度秋季大会（第132回講演大会）, 京都, 2023/10
  • 機械学習を用いたTi-3Al-2V焼結圧延合金のβ相ネットワーク組織形成と力学特性との相関モデリング, 谷川 泰亮,刈屋 翔太,梅田 純子,近藤 勝義, 粉体粉末冶金協会2023年度秋季大会（第132回講演大会）, 京都, 2023/10
  • レニウム添加量と均質化熱処理条件の最適化によるα+β型Ti-4Fe焼結押出材の高強度化, 寺前 拓馬,Issariyapat Ammarueda,刈屋 翔太,梅田 純子,近藤 勝義, 粉体粉末冶金協会2023年度秋季大会（第132回講演大会）, 京都, 2023/10
  • IPhase distribution homogeneity and tensile properties in extruded PM Ti-4Fe alloys with refractory metal addition, T. Teramae,A. Issariyapat,S. Kariya,Junko Umeda,K. Kondoh, SPMIC2023, 京都, 2023/10
  • Influence of Feedstock Characteristics on the In-situ Alloying Behaviour of Ti-Fe by L-PBF, J. Huang,A. Issariyapat,S. Kariya,Junko Umeda,K. Kondoh, JSPMIC2023, 京都, 2023/10
  • X線CTによるL-PBF材の三次元気孔配置の定量的解析, 尾﨑 由紀子,重田 雄二,桧垣 武史,荒牧 正俊,野村 直之,近藤 勝義, 粉体粉末冶金協会2023年度秋季大会（第132回講演大会）,, 2023/10
  • 強配向α-Ti積層造形材の創製と組織形成機構の解明, 花田 滉生,刈屋 翔太,梅田 純子,近藤 勝義, 日本金属学会2023年秋期講演大会, 富山, 2023/09
  • Near-α型Ti合金の熱処理によるネットワーク組織形成と力学特性向上, 谷川 泰亮,刈屋 翔太,梅田 純子,近藤 勝義,坪川 翼,堀本 里加子,池田 穂香, 日本金属学会2023年秋期講演大会, 富山, 2023/09
  • レニウム添加Ti-Fe焼結押出材の強化機構，日本金属学会2023年秋期講演大会, 寺前 拓馬,A. Issariyapat,刈屋 翔太,梅田 純子,近藤 勝義, 日本金属学会2023年秋期講演大会, 富山, 2023/09
  • Enhancing ductility in additively manufactured solute-lean martensitic Ti-alloys, J. Huang,A. Issariyapat,刈屋 翔太,梅田 純子,近藤 勝義, 日本金属学会2023年秋期講演大会, 富山, 2023/09
  • Mechanical anisotropy in duplex-phase laser powder bed fusion titanium alloys, J. E. Peterson,梅田 純子,近藤 勝義, 日本金属学会2023年秋期講演大会, 富山, 2023/09
  • Laser-assisted additive manufacturing of Ti-Zr Alloy: an alternative metal for medical implants, A. Issariyapat,刈屋 翔太,梅田 純子,近藤 勝義, 日本金属学会2023年秋期講演大会, 富山, 2023/09
  • 純チタンL-PBF材の積層方向に対する内部気孔の周期解析, 重田 雄二,野村 直之,荒牧 正俊,工藤 健太郎,近藤 勝義,尾﨑 由紀子, 日本鉄鋼協会2023年秋期講演大会, 富山, 2023/09
  • 造形欠陥が純チタンL-PBF材の塑性変形に及ぼす影響, 近藤 勝義,刈屋 翔太,梅田 純子, 日本鉄鋼協会2023年秋期講演大会, 富山, 2023/09
  • Cost Effective In-Situ Alloying of Ti-Fe via Laser Powder Bed Fusion, J. Huang,A. Issariyapat,S. Kariya,J. Umeda,K. Kondoh, AMPM2023, Las Vegas, 2023/06
  • パーシステントホモロジーによるTi-AM材の延性き裂発生に関わる3D欠陥配置の特定, 重田 雄二,荒牧 正俊,工藤 健太郎,品川 一成,野村 直之,近藤 勝義,尾﨑 由紀子, 粉体粉末冶金協会2023年度春季大会（第131回講演大会）,, 2023/06
  • TiC粒子分散Ti-Zr粉末圧延材の強化機構解明, 宮本 晴,梅田 純子,刈屋 翔太,近藤 勝義, 粉体粉末冶金協会2023年度春季大会（第131回講演大会）,, 2023/06
  • チタン粉末の焼結過程における酸化チタン分解反応時の微細粒組織形成機構の解明, 釘宮 尚大,梅田 純子,刈屋 翔太,A. Bahador,近藤 勝義, 粉体粉末冶金協会2023年度春季大会（第131回講演大会, 東京, 2023/06
  • Ti-3Al-2V焼結圧延材におけるネットワーク組織形成と力学特性に及ぼす熱処理の影響, 谷川 泰亮,刈屋 翔太,梅田 純子,近藤 勝義,坪川 翼,堀本 里加子,池田 穂香, 粉体粉末冶金協会2023年度春季大会（第131回講演大会）, 東京, 2023/06
  • LPBFにより作製した酸素固溶チタン合金の塑性変形機構, 刈屋 翔太,A. Issariyapat,A. Bahador,梅田 純子,近藤 勝義, 粉体粉末冶金協会2023年度春季大会（第131回講演大会）, 東京, 2023/06
  • 軽元素を利用したチタン積層造形材の力学機能化, 近藤 勝義,A. Issariyapat,梅田 純子,市川 絵理, 粉体粉末冶金協会2023年度春季大会（第131回講演大会）, 東京, 2023/06
  • 酸素固溶チタン材における塑性変形機構に及ぼすひずみ速度の影響, 瀧沢 良太、刈屋 翔太、近藤 勝義、梅田 純子, 粉体粉末冶金協会2022年度秋季大会（第130回講演大会）, 京都, 2022/11
  • Advanced Coating Process of Un-bundled Carbon Nanotubes on Titanium Plate to Improve Tribological Property and Biocompatibility, Junko UMEDA,Hirofumi MIYAJI,Bunshi FUGETSU,Seung Ki MOON,Anak KHANTACHAWANA,Shota KARIYA,Katsuyoshi KONDOH, International Conference on Materials and Processing 2022, Okinawa, 2022/11
  • Advanced Powder Metallurgy Process for High-strengthened Titanium Materials Using Ubiquitous Solid Solutes, Katsuyoshi Kondoh,Shota Kariya,Ammarueda Issariyapat,Shufeng Li,Junko Umeda, International Conference on Materials and Processing 2022, Okinawa, 2022/11
  • Understanding The Effect Of Process Parameters On Three-dimensional Pore Configurations And Mechanical Properties Of Laser Additive Manufactured Ti Using Synchrotron X-ray Computed Tomography And Homology, Y. Shigeta,M. Aramaki,K. Kudo,K. Shinagawa,N. Nomura,K. Kondoh,M. Hoshino,K. Uesugi,Y. Ozaki, World PM2022, France, 2022/10
  • High Strength Ti-Zr Alloys With Balanced Ductility Fabricated By Powder Metallurgy And Additive Manufacturing Routes, Katsuyoshi Kondoh,Ammarueda Issariyapat,Shota Kariya,Shufeng Li,Abdulaziz Alhazaa,Junko Umeda, World PM2022, France, 2022/10
  • チタンとPET樹脂の接合機構に及ぼす界面での気泡の影響, 近藤 勝義,西村 のどか,刈屋 翔太,梅田 純子, 日本機械学会 2022年度年次大会, 富山, 2022/09
  • Mapping a novel columnar-to-isotropic transition in laser powder bed fusion Ti-10Mo (15+5), J. E. Peterson,J. Umeda,K. Kondoh, 日本金属学会2022年秋期講演大会, 福岡, 2022/09
  • The role of solutes and process parameters in grain structure control of additively manufactured Ti (10+5), A. Issariyapat,S. Kariya,J. Umeda,K. Kondoh, 日本金属学会2022年秋期講演大会, 福岡, 2022/09
  • 酸素固溶チタン合金焼結材およびL-PBF材の引張破壊挙動, 刈屋 翔太,瀧沢 良太,梅田 純子,近藤 勝義, 日本金属学会2022年秋期講演大会, 福岡, 2022/09
  • Strength enhancement in laser-based powder bed fusion processed Ti via interstitial solutes, A. Issariyapat,S. Kariya,J. Umeda,K. Kondoh, The 75th IIW Annual Assembly and International Conference (IIW 2022), Tokyo, 2022/07
  • チタン積層造形材における3次元構造欠陥が引張強度に及ぼす影響, 重田 雄二,荒牧 正俊,工藤 健太郎,品川 一成,野村 直之,近藤 勝義,尾﨑 由紀子, 粉体粉末冶金協会2022年度春季大会（第129回講演大会）, WEB開催, 2022/05
  • Ti-Cu積層造形合金における熱処理過程での金属間化合物の析出機構解明, 花田 滉生,刈屋 翔太,設樂 一希,梅田 純子,近藤 勝義, 粉体粉末冶金協会2022年度春季大会（第129回講演大会）, WEB開催, 2022/05
  • 不純物酸素がTi-64合金積層造形体の微細組織形成に及ぼす影響, 刈屋 翔太,A. Issariyapat,A. Bahador,梅田 純子,近藤 勝義, 粉体粉末冶金協会2022年度春季大会（第129回講演大会）, WEB開催, 2022/05
  • 高濃度炭素含有チタン焼結材の強化機構, 近藤 勝義,市川 絵理,J. E. Peterson,林 雄大,刈屋 翔太,設樂 一希,梅田 純子, 粉体粉末冶金協会2022年度春季大会（第129回講演大会）, WEB開催, 2022/05
  • 微量添加元素を利用したチタン積層造形体の力学機能化, 近藤 勝義,Ammarueda Issariyapat,刈屋 翔太,梅田 純子, 第９７回レーザ加工学会講演会,, 2022/05
  • Selective laser melting (SLM) of Ti-Zr Material: Process optimization, Strengthening mechanism and its application, Ammarueda Issariyapat,Shota Kariya,Junko Umeda,Katsuyoshi Kondoh:, 6the Asian Symposium on Materials and Processing 2022, Virtual, 2022/01
  • Effect of Impurities on the microstructures of SLMed Ti-6Al-4V alloy, Shota Kariya,Ammarueda Issariyapat,Junko Umeda,Katsuyoshi Kondoh, 6the Asian Symposium on Materials and Processing 2022, Virtual, 2022/01
  • チタン積層造形材の組織と力学特性に及ぼす炭素添加の影響, 市川 絵理,刈屋 翔太,設樂 一希,梅田 純子,近藤 勝義, （一社）軽金属学会創立70周年記念 第141回秋期大会, WEB開催, 2021/11
  • SLM Induced Carbon Solid Solution in Titanium Alloys, J. E. Peterson,E. Ichikawa,J. Umeda,K. Kondoh, 粉体粉末冶金協会2021年度秋季大会（第128回講演大会）, WEB開催, 2021/11
  • Microstructure and mechanical properties of powder metallurgy Ti?Fe?W alloy consolidated by spark plasma sintering incorporating with thermomechanical processing, A. Bahador,J. Umeda,K. Kondoh, 粉体粉末冶金協会2021年度秋季大会（第128回講演大会）, WEB開催, 2021/11
  • Lightweight micro-architectured lattice Ti-Zr materials manufactured by SLM, A. Issariyapat,J. Umeda,K. Kondoh, 粉体粉末冶金協会2021年度秋季大会（第128回講演大会）, WEB開催, 2021/11
  • Additively Manufactured High-Performance Commercially Pure Titanium Strengthened with Ubiquitous Light Elements, A. Issariyapat,J. Umeda,K. Kondoh, LightMAT 2021, Web, 2021/11
  • 軽元素による純チタン焼結材の固溶強化量予測と検証, 近藤 勝義、刈屋 翔太, （一社）日本鉄鋼協会 第182回秋季講演大会, オンライン開催, 2021/09
  • 実験および第一原理計算の系統的データベースに基づくチタン固溶強化量予測モデルの構築, 設樂 一希,吉矢 真人,梅田 純子,近藤 勝義, （公社）日本金属学会 2021年秋期 第169回講演大会, WEB開催, 2021/09
  • Low cost duplex Ti alloys with excellent tensile strength and tailored microstructur, A. Bahador,J. Umeda,K. Kondoh, （公社）日本金属学会 2021年秋期 第169回講演大会, WEB開催, 2021/09
  • α-Ti中の格子間固溶元素の拡散機構と電子状態, 設樂 一希,吉矢 真人,梅田 純子,近藤 勝義, 日本金属学会2021年春期(第168回)講演大会, WEB開催, 2021/03
  • Nitrogen influence on microstructure evolution and tensile properties of commercially pure Ti fabricated by SLM, A. Issariyapat,J. Umeda,K. Kondoh, The 22nd Annual Academic Exchange Seminar between Osaka University and Shanghai Jiao Tong University- 2020 Academic Exchange Workshop on Materials Joining -, (WEB), 2020/11
  • 生体適合性Ti-Zr系焼結合金の特性, 近藤 勝義,寺前 拓馬,設樂 一希,梅田 純子, 学際・国際的高度人材育成ライフイノベーションマテリアル創製共同研究プロジェクト(6大学連携プロジェクト) 第5回公開討論会, WEB開催, 2020/11
  • 医療デバイス用TiNi系焼結合金の結晶組織制御による高機能化, 近藤 勝義,米澤 隆行,枝 知樹,梅田 純子, （一社）粉体粉末冶金協会2020年度秋季大会, WEB開催, 2020/10
  • レーザー積層造形法により作製した酸素固溶チタン材の組織形成機構と力学特性, 市川 絵理,設樂 一希,梅田 純子,近藤 勝義, （一社）軽金属学会第138回春期大会, 高松, 2020/05
  • その場合成法によるAl3Zr粒子分散Al焼結複合材の摩擦摩耗特性, 西村 のどか,梅田 純子,設樂 一希,近藤 勝義, （一社）軽金属学会第138回春期大会, 高松, 2020/05
  • 高強度α＋β型Zr固溶Ti-4Fe粉末押出材の組織形成挙動のその場観察, 寺前 拓馬,設樂 一希,梅田 純子,近藤 勝義, （一社）軽金属学会第138回春期大会, 高松, 2020/05
  • 系統的実験データベースと第一原理計算に基づくα-Ti材における固溶強化量予測モデル, 設樂 一希,吉矢 真人,梅田 純子,近藤 勝義, （公社）日本金属学会 2020年春期大会, 東京, 2020/03
  • Ta安定化β-Ti合金における酸素固溶強化, 横田 克哉,設樂 一希,A. Bahador,梅田 純子,近藤 勝義, （公社）日本金属学会 2020年春期大会, 東京, 2020/03
  • High strength and ductility titanium materials with cheap alloying elements fabricated by powder metallurg, K. Kondoh,T. Tanaka,S. Kariya,J. Umeda, TMS2020, San Diego, USA, 2020/02
  • Solutes Diffusion Mechanism and Electronic Structures in Alpha Titanium, Kazuki Shitara,Masato Yoshiya,Junko Umeda,Katsuyoshi Kondoh, Visual-JW 2019 & WSE 2019, Osaka, Japan, 2019/11
  • Influence of processing parameters and nitrogen solid solution on microstructures of pure titanium materials fabricated by selective laser melting, Ammarueda Issariyapat,Junko Umeda,Katsuyoshi Kondoh, Visual-JW 2019 & WSE 2019, Osaka, Japan, 2019/11
  • A Comparative Study on the Laser Welding Versus Friction Stir Welding of Ti-Ni Alloy, Abdollah Bahador,Junko Umeda,Seiichiro Tsutsumi,Hidetoshi Fujii,Katsuyoshi Kondoh, Visual-JW 2019 & WSE 2019, Osaka, Japan, 2019/11
  • Microsturucture and Mechanical Properties of Friction Stir Welding between AZ31 and AA6061 with Low Rotation Speed, Zuesong Fu,Ke Chen,Zhen Zhang,Katsuyoshi Kondoh,Min Wang, Visual-JW 2019 & WSE 2019, Osaka, Japan, 2019/11
  • Prediction and Mechanism of Tensile Strengthening in Single β-phase Ti-Ta Alloys with Oxygen Solutes, K. Yokota,K. Shitara,A. Bahador,J. Umeda,K. Kondoh, NIMS WEEK Academic Symposium, Tokyo, Japan, 2019/10
  • Influence of heat treatment on strength and ductility improvement of high nitrogen dissolved in α-Ti alloy, A. Issariyapat,J. Umeda,K. Kondoh, PMTi2019, Salt Lake City, USA, 2019/09
  • Al-Fe系超急冷粉末を用いた粉末熱間押出材の諸特性, 前田 徹,宮崎 博香,岩崎 類,桑原 鉄也,井上 明子,近藤 勝義, 日本金属学会2019年秋期講演大会, 岡山, 2019/09
  • Microstructural Characterization of Laser Welded Shape Memory Alloy Produced by Powder Metallurgy, Abdollah Bahador,Junko Umeda,Katsuyoshi Kondoh, CMA 2019, Beijin, China, 2019/08
  • Al-Fe系超急冷粉末を用いた粉末熱間押出材の諸特性, 前田 徹,宮崎 博香,岩崎 類,桑原 鉄也,井上 明子,近藤 勝義, 粉体粉末冶金協会2019年度春季大会, 横浜,大阪, 2019/06
  • β単相Ti-35 at.% Ta + O系合金における酸素固溶挙動と強度解析, 横田 克哉,設樂 一希,A. Bahador,梅田 純子,近藤 勝義, 粉体粉末冶金協会2019年度春季大会, 横浜,大阪, 2019/06
  • Zr固溶Ti-Fe合金の針状組織形成挙動と強度解析, 寺前 拓馬,田中 貴之,福生 瑞希,設樂 一希,梅田 純子,近藤 勝義, 粉体粉末冶金協会2019年度春季大会, 横浜,大阪, 2019/06
  • Nano-carbon Reinforced Metal Matrix Composites Fabricated by Powder Metallurgy Process, K. Kondoh,B. Chen,J. Umeda, TMS2019, San Antonio, USA, 2019/03
  • Comparison on microstructure and tensile properties of nitrogen strengthening in commercially pure titanium (CP-Ti), fabricated by conventional powder metallurgy (PM) and Additive Manufacturing (AM), A. Issariyapat,T. Song,J. Umeda,K. Kondoh, 4th Osaka University-JWRI/NTU-MSE Workshop, Osaka,Japan, 2019/03
  • Ductility improvement mechanism of pure titanium with oxygen solid solution after water quenching, S. Kariya,J. Umeda,K. Kondoh, 4th Osaka University-JWRI/NTU-MSE Workshop, Osaka,Japan, 2019/03
  • Tribological Property and Biocompatibility of Titanium Plate Coated with Carbon Nanotubes, J. Umeda,K. Kondoh,E. Nishida,H. Miyaji,B. Fugetsu, 4th Osaka University-JWRI/NTU-MSE Workshop, Osaka,Japan, 2019/03
  • Strengthening Mechanism of α+β Type Ti-Fe Alloy by Powder Metallurgy, T. Tanaka,S. Kariya,J. Shen,J. Umeda,K. Kondoh, ASMP2018, Bangkok, Thailand, 2018/12
  • カーボンナノチューブによるチタン-生体界面のナノスケール改質と骨形成接合効果, 西田 絵利香,宮治 裕史,蔀 佳奈子,眞弓 佳代子,菅谷 勉,梅田 純子,近藤 勝義,古月 文志, 第16回日本再生歯科医学会学術大会, 名古屋, 2018/11
  • Co元素添加によるTi-Ni超弾性焼結合金の力学特性制御, 枝 知樹,梅田 純子,近藤 勝義, 第69回塑性加工連合講演会, 熊本, 2018/10
  • ジルコニウムおよび酸素固溶チタン焼結合金の力学挙動に及ぼす均質化処理の影響, 福生 瑞希,刈屋 翔太,梅田 純子,近藤 勝義, 第69回塑性加工連合講演会, 熊本, 2018/10
  • 鉄・酸素固溶チタン焼結材における相変態挙動と力学特性, 田中 貴之,刈屋 翔太,SHEN Jianghua,梅田 純子,近藤 勝義, 粉体粉末冶金協会平成30年度秋季大会, 新潟, 2018/10
  • Estimation on Strengthening Behavior of Titanium Alloy by Materials Informatics, K. Kondoh, Shanghai Jiao Toning University and Osaka University Joint Workshop on Materials & Joining, Shanghai, China, 2018/10
  • Direct Bonding of Plastic Materials to Metals Using C=O/C-O Bonds, K. Kondoh, Shanghai Jiao Toning University and Osaka University Joint Workshop on Materials & Joining, Shanghai, China, 2018/10
  • Microstructural and mechanical properties of Titanium with solid-solution elements by powder metallurgy process, J. Umeda,M. Fukuo,S. Kariya,K. Kondoh, The 3rd International Symposium on Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development (iLIM-3), Tokyo, 2018/09
  • 鉄・酸素固溶チタン焼結材における相変態挙動と力学特性, 田中 貴之,刈屋 翔太,J. Shen,梅田 純子,近藤 勝義, 日本金属学会2018年秋期講演大会, 仙台, 2018/09
  • 窒素固溶Ti-6Al-4V焼結合金の熱履歴による組織形成機構の解明, 上山 健人,刈屋 翔太,福生 瑞希,梅田 純子,近藤 勝義, 日本金属学会2018年秋期講演大会, 仙台, 2018/09
  • 酸素固溶チタン鋳造材における酸素分布制御と延性, 刈屋 翔太,梅田 純子,近藤 勝義, 日本金属学会2018年秋期講演大会, 仙台, 2018/09
  • 固溶原子と相変態を利用したマルチスケールでのヘテロ構造化によるチタン焼結材の高強度・高延性同時発現機構の解明と高次機能化, 近藤 勝義, ＪＳＴ産学共創基礎基盤研究プログラム「ヘテロ構造制御」公開シンポジウム, 仙台, 2018/09
  • TiNi形状記憶粉末合金の組織および力学的特性に及ぼす形状記憶熱処理の影響, 早場 亮一,田邊 由紀子,梅田 純子,近藤 勝義, 2018年度日本機械学会年次大会, 大阪, 2018/09
  • Mg/Al異材積層材料における界面反応層が力学特性に及ぼす影響, 近藤 勝義,三宮 広之,梅田 純子, 2018年度日本機械学会年次大会, 大阪, 2018/09
  • Ti－TiN混合粉末を用いた窒素固溶チタン粉末材料の摩擦摺動挙動解析, 近藤 勝義, 2018年度日本機械学会年次大会, 大阪, 2018/09
  • Ductility improvement mechanism of pure titanium with oxygen solid solution after water quenching, S. Kariya,J. Umeda,K. Kondoh, ISMANAM2018, Rome, Italy, 2018/07
  • Tensile fracture of TiB whisker reinforced Ti alloy matrix composites, H. Kurita,K. Kondoh,J. Umeda,N. Yodoshi, Thermec2018, Paris, France, 2018/07
  • Co元素添加による Ti-Ni超弾性焼結合金の相変態制御, 枝 知樹,早場 亮一,梅田 純子,近藤 勝義, 粉体粉末冶金協会平成30年度春季大会, 京都, 2018/05
  • ジルコニウムおよび酸素原子固溶純チタン粉末焼結体の力学特性向上を目指した固溶状態均質化, 福生 瑞希,刈屋 翔太,梅田 純子,近藤 勝義, 粉体粉末冶金協会平成30年度春季大会, 京都, 2018/05
  • 急冷による酸素過剰添加脆性チタン材の延性回復とその機構解明, 刈屋 翔太,梅田 純子,Ma Qian,近藤 勝義, 日本金属学会2018年春期講演大会, 千葉, 2018/03
  • 酸素固溶強化Ti-6Al-4V焼結合金の高延性発現機構の解明, 上山 健人,刈屋 翔太,福生 瑞希,梅田 純子,近藤 勝義, 日本金属学会2018年春期講演大会, 千葉, 2018/03
  • 鉄固溶チタン焼結材における相変態挙動と力学特性, 田中 貴之,刈屋 翔太,梅田 純子,近藤 勝義, 日本金属学会2018年春期講演大会, 千葉, 2018/03
  • Ti6Al4V-TiB複合材料の微細構造と引張特性の関係, 鈴木 潮里,栗田 大樹,坂井田 喜久,近藤 勝義,梅田 純子,吉年 規治, 第9回日本複合材料会議, 京都, 2018/02
  • 鉄固溶強化チタン焼結材の腐食特性に及ぼす鉄含有量の影響, 竹内 彰吾,吉矢 真人,刈屋 翔太,梅田 純子,近藤 勝義,畠山 賢彦,砂田 聡, 平成29年度日本金属学会・日本鉄鋼協会北陸信越支部連合講演会, 福井, 2017/12
  • 鉄固溶強化チタン焼結材の電気化学特性, 竹内 彰吾,吉矢 真人,刈屋 翔太,梅田 純子,近藤 勝義,砂田 聡, 粉体粉末冶金協会平成29年度秋季大会, 京都, 2017/11
  • Ti-Nb and Ti-Ni Shape Memory Alloys Produced by Powder Technology: Microstructure, Mechanical and Superelastic Properties, Abdollah Bahador,Esah Hamzah,Katsuyoshi Kondoh,Tuty Asma Abu bakar,Farazila Yusof,Junko Umeda,Shota Kariya, JSPM International Conference on Powder and Powder Metallurgy, Kyoto, Japan, 2017/11
  • Solid solution strengthening mechanisms of PM α-Ti materials with zirconium and oxygen atoms via thermal decomposition of ZrO2 additives in sintering, Mizuki Fukuo,Shota Kariya,Junko Umeda,Katsuyoshi Kondoh, JSPM International Conference on Powder and Powder Metallurgy, Kyoto, Japan, 2017/11
  • Strengthening mechanism of α-Ti materials by synergy effect of substitutional and interstitial solid solution via powder metallurgy, Shota Kariya,Mizuki Fukuo,Junko Umeda,Masato Yoshiya,Katsuyoshi Kondoh, JSPM International Conference on Powder and Powder Metallurgy, Kyoto, Japan, 2017/11
  • Effect of Substitutional/Interstitial Solid Solution on Tensile Properties on Powder Metallurgy α-ti Materials, S. Kariya,M. Fukuo,J. Umeda,M. Yoshiya,K. Kondoh, ICoSEM2017, Kuala Lumpur, Malaysia, 2017/10
  • Dissolution of Cr2O3 particles in Ti sintered material and strengthening behavior, Katsuyoshi Kondoh,Ryuho Ikemasu,Junko Umeda, Materials Science & Technology 2017 (MS&T17), Pittsburgh, USA, 2017/10
  • Hot pressing effect on microstructural and mechanical properties of SLM Al10Si1Mg alloy, Katsuyoshi Kondoh,Biao Chen,Junko Umeda,Seung Moon,Xiling Yao,Guijun Bi, Materials Science & Technology 2017 (MS&T17), Pittsburgh, USA, 2017/10
  • ヘテロ組識をもつ鉄溶強化チタン焼結材の腐食特性に及ぼす鉄含有量の影響, 竹内 彰吾,吉矢 真人,刈屋 翔太,梅田 純子,近藤 勝義,畠山 賢彦,砂田 聡, 日本金属学会秋季(第161回）講演大会, 北海道, 2017/09
  • Effect of laser welding on the superelasticity, mechanical properties and microstructure of powder metallurgy processed shape memory alloys, Abdollah Bahador,Esah Hamzah,Katsuyoshi Kondoh,Tuty Asma Abu bakar,Farazila Yusof,Junko Umeda,Shota Kariya, 2017/09
  • 置換・侵入複合固溶を利用したα型チタン粉末焼結材の高強度化, 刈屋 翔太,福生 瑞希,梅田 純子,吉矢 真人,近藤 勝義, 日本金属学会2017年秋期講演大会, 北海道, 2017/09
  • 純TiとMg-Al合金の固相接合過程における化合物形成機構と接合強度, 近藤 勝義,P. Pripanapong,梅田 純子,高橋 誠, 溶接学会平成29年度秋季全国大会, 福岡, 2017/09
  • Atomic/nano-scale structured titanium materials with high strength and excellent ductility, K. Kondoh, Advances in Functional Materials 2017, Los Angeles, USA, 2017/08
  • 籾殻由来のナノ構造体シリカ粒子を用いた低アルカリ注入材の材料特性, 羅 承賢,若杉 伸一,金沢 智彦,西川 奈那,近藤 勝義,梅田 純子, 第52 回地盤工学研究発表会, 名古屋, 2017/07
  • Conduction and keyhole Laserwelding of Ti-Ni shape-memory alloys produced by spark plasma sintering, A. Bahador,E. Hamzah,K. Kondoh,Y. Kawahito,J. Umeda,T. Bakar,F. Yusof, ACMME 2017, Tokyo, Japan, 2017/06
  • 籾殻由来のナノ構造体シリカ微粒子を用いたセメントの低アルカリセメントへの適用検討, 羅 承賢,金沢 智彦,近藤 勝義,梅田 純子, 第71回セメント技術大会, 東京, 2017/05
  • 焼結過程での熱分解を利用したジルコニウムと酸素の複合固溶による純チタン粉末押出材の強化機構の解明, 福生 瑞希,刈屋 翔太,梅田 純子,近藤 勝義, 粉体粉末冶金協会平成29年度春季大会, 東京, 2017/05
  • 炭素系ナノ材料の単分散によるアルミニウム焼結材料の強化機構に関する研究, 陳 彪,梅田 純子,近藤 勝義, 粉体粉末冶金協会平成29年度春季大会, 東京, 2017/05
  • 軽元素固溶強化を利用した希少金属フリーα型チタン粉末焼結材の高強度化, 近藤 勝義,山辺 康宏,梅田 純子, 粉体粉末冶金協会平成29年度春季大会, 東京, 2017/05
  • Advanced Mechanical Properties of Powder Metallurgy Titanium with a High Concentration of Oxygen and Nitrogen, J. Shen,B. Chen,X. Ye,H. Imai,J. Umeda,K. Kondoh, 2017 MRS, Phonix, USA, 2017/04
  • Investigation into the Deformation Twins in Pure Ti via In Situ and Ex Situ Microstructure Observation, J. Shen,B. Chen,X. Ye,H. Imai,J. Umeda,K. Kondoh, 2017 MRS, Phonix, USA, 2017/04
  • An Effect of Zirconia Addition on Strengthening Ability of Titanium Alloys Prepared by Powder Metallurgy, N. Vorapattanapaibul,K. Kondoh,A. Khantachawana, EAP, Singapore, 2017/03
  • Titanium hydrides enhancing improvement of ductility of PM α-Ti material, K. Kondoh,T. Mimoto,J. Umeda,H. Imai, TMS 2017, San Diego, USA, 2017/02
  • Ti-TiN混合粉末を用いた窒素固溶チタン粉末材料の摩擦摺動挙動, 近藤 勝義,山辺 康宏,梅田 純子,今井 久志, （一社）日本機械学会 第24回機械材料・材料加工技術講演会(M&P2016), 東京, 2016/11
  • 固気直接窒化法による純Al圧粉成形体の窒化反応機構とAl/AlN粉末複合押出材の機械的特性, 大西 玄洋,梅田 純子,今井 久志,近藤 勝義, （公社）粉体粉末冶金協会平成28年度秋季大会, 仙台, 2016/11
  • 窒素固溶強化チタン粉末押出材の摩擦摺動特性評価, 山辺 康宏,梅田 純子,今井 久志,近藤 勝義, （公社）粉体粉末冶金協会平成28年度秋季大会, 仙台, 2016/11
  • Friction Behavior of Network-structured Carbon Nanotubes Coating on Pure Ti Plate, Katsuyoshi Kondoh,Junko Umeda,Hirofumi Miyaji,Erika Nishida,Bunshi Fugetsu, Materials Science & Technology 2016(MS&T16), Salt Lake City, USA, 2016/10
  • Mechanical Properties of PM CNT-Dispersed Cu Composite, H. Imai,K. Kondoh,J. Umeda, International Conference on Material Science and Engineering Technology (ICMSET2016), Phuket, Thailand, 2016/10
  • In-situ decomposition of silicon nitride particles in titanium composite and its mechanical properties, H. Imai,H. Yamabe,K. Kondoh,J. Umeda,A. Khantachawana, The International Symposium on Visualization in Joining & Welding Science through Advanced Measurements and Simulation (Visual-JW2016), Osaka, Japan, 2016/10
  • Microstructural and Mechanical Properties of Near α-Titanium with Solid-Solution Elements by Powder Metallurgy Process, K. Kondoh,S. Kariya,R. Ikemasu,M. Fukuo,J. Umeda,H. Imai, The 1st International Symposium on Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development (iLIM-1), Osaka, Japan, 2016/10
  • Tiと窒化ケイ素粉末混合焼結体のIn-situ分解反応挙動と摩耗特性, 今井 久志,山辺 康宏,梅田 純子,近藤 勝義, （一社）日本機械学会2016年度年次大会, 福岡, 2016/09
  • Ti+TiN混合粉末を用いた固溶強化および粒子分散強化による純Ti焼結材の力学特性, 近藤 勝義,山辺 康宏,梅田 純子,今井 久志, （一社）日本機械学会2016年度年次大会, 福岡, 2016/09
  • C=O二重結合を利用した樹脂と金属の直接接合プロセスと接合機構の解明, 近藤 勝義,今井 久志,梅田 純子, （一社）日本機械学会2016年度年次大会, 福岡, 2016/09
  • Tribology property of α- pure titanium strengthened by nitrogen solid-solution, Y. Yamabe,H. Imai,J. Umeda,K. Kondoh, PRICM9, Kyoto, Japan, 2016/08
  • High-Performance Aluminum Matrix Composites Reinforced Carbon Nanotubes and Alumina Nanoparticles, B. Chen,H. Imai,J. Umeda,K. Kondoh, 2016/05
  • High Stability of Tensile Twins in Mg Fabricated via Powder Metallurgy,, J. Shen,H. Imai,B. Chen,X. YE,J. Umeda,K. Kondoh, 2016/05
  • 窒素固溶強化純チタン焼結材の摩擦摺動特性, 山辺 康宏,近藤 勝義, 軽金属学会第130回春期大会, 大阪, 2016/05
  • カーボンナノチューブ分散強化高強度アルミニウム複合材の研究, 陳 彪,今井 久志,近藤 勝義, 軽金属学会第130回春期大会, 大阪, 2016/05
  • 粉末冶金法によるCNT分散純銅基複合材料の力学特性, 今井 久志,近藤 勝義, 平成28年度塑性加工春季講演会, 京都, 2016/05
  • Carbon nano-rods reinforced powder metallurgy aluminum composites, K. Kondoh,B. Chen,J. Umeda,H. Imai, AeroMat 2016, Washington, USA, 2016/05
  • Cost-ffective, high strength and ductility titanium materials by powder metallurgy process, K. Kondoh,T. Mimoto,J. Umeda, AeroMat 2016, Washington, USA, 2016/05
  • 極限環境下における水中レーザ切断技術に関する基礎研究, 川人 洋介,氷見 太 水谷 正海,近藤 勝義,片山 聖二, （一社）溶接学会 平成28年度春季全国大会, 大阪, 2016/04
  • Strengthening Effect of N-addition on Ti-Si-N Ternary Alloys Fabricated by Spark Plasma Sintiering, P. Khemglad,J. Kajornchaiyakul,K. Kondoh,A. Khantachawana, Environment and Information Engineering (SEEIE 2016), Bangkok, Thailand, 2016/03
  • チタンと生体界面間へのカーボンナノチューブによるナノ構造の応用, 西田 絵利香,宮治 裕史,梅田 純子,近藤 勝義,滝田 裕子,吉田 崇,村上 秀輔,眞弓 佳代子,蔀 佳奈子,古月 文志,川浪 雅光, 第15回日本再生医療学会総会, 大阪, 2016/03
  • Tribological Properties of Carbon Nanotubes Coated onto Pure Titanium Plate, Junko Umeda,Bunshi Fugetsu,Hirofumi Miyaji,Erika Nishida,and Katsuyoshi Kondoh, BIT's 2nd Annual World Congress of Smart Materials-2016, Singapore, 2016/03
  • Advanced TiNi-X Alloy via Powder Metallurgy Process, K. Kondoh, BIT's 2nd Annual World Congress of Smart Materials-2016, Singapore, 2016/03
  • Effect of Initial State on Dispersion Evolution of Carbon Nanotubes in Aluminum Matrix Composites during High Energy Ball Milling Process, K. Kondoh,B. Chen,H. Imai,J. Umeda, TMS 2016, Nashville, USA, 2016/02
  • Strengthening Behavior and Mechanisms of Extruded Powder Metallurgy Ti Materials Reinforced with Ubiquitous Light Elements, Takanori Mimoto,Junko Umeda,Katsuyoshi Kondoh, TMS 2016, Nashville, USA, 2016/02
  • Fundamental Properties of PM Ti Materials with Nitrogen Solid-solution and TiN Particle Dispersion, Katsuyoshi Kondoh,Takanori Mimoto,Yashuhiro Yamabe,Junko Umeda,Hisashi Imai, TMS 2016, Nashville, USA, 2016/02
  • その場分解反応を利用した窒化ケイ素粒子添加Ti基粉末材料の高温強度特性, 今井 久志,近藤 勝義,梅田 純子,Anak Khantachawana, （公社）粉体粉末冶金協会平成27年度秋季大会, 京都, 2015/11
  • 固気直接窒化法によるAl/AlN複合粉末押出材の組織構造と力学特性, 大西 玄洋,今井 久志,梅田 純子,近藤 勝義, 第23回機械材料・材料加工技術講演会(M&P2015), 広島, 2015/11
  • その場合成によるAl4C3ナノロッド分散高強度Al基複合粉末材料, 陳 彪,今井 久志,大西 玄洋,近藤 勝義, 第23回機械材料・材料加工技術講演会(M&P2015), 広島, 2015/11
  • 窒化ケイ素粒子添加Ti基粉末押出材の組織構造と力学特性, 今井 久志,近藤 勝義,梅田 純子,Anak Khantachawana, 第23回機械材料・材料加工技術講演会(M&P2015), 広島, 2015/11
  • カーボンナノチューブ分散強化アルミニウム複合材料の破壊機構, 近藤 勝義,Biao Chen,梅田 純子,今井 久志, 第23回機械材料・材料加工技術講演会(M&P2015), 広島, 2015/11
  • CFRP と金属の超音波接合界面の構造解析, 近藤 勝義,今井 久志,梅田 純子, 第6回6大学6研究所連携プロジェクト公開討論会, 仙台, 2015/11
  • Al4C3 Nano-rods Reinforced PM Aluminum Composites, B. Chen,K. Kondoh, 3rd International Conference on Powder Metallurgy in Asia (AMPA2015), Kyoto, Japan, 2015/11
  • Wear Characteristics of P/M Ti Composite with High Hardness Obtained by In-situ Reaction between Titanium and Silicon Nitride Particles, H. Imai,K. Kondoh,J. Umeda,A. Khantachawana, 3rd International Conference on Powder Metallurgy in Asia (AMPA2015), Kyoto, Japan, 2015/11
  • Novel Processing of High-strength & High-ductility PM Pure Titanium with Light Elements, K. Kondoh, 3rd International Conference on Powder Metallurgy in Asia (AMPA2015), Kyoto, Japan, 2015/11
  • Evaluation of the ion-releasing property of tailored Sr-Ca-containing inorganic cement, W. Kiba,H. Imai,K. Kondoh,S. Imazato, Academy of Dental Materials (ADM) 2015, Maui, USA, 2015/10
  • In-situ Formed AlN Nano-particles Reinforced P/M Al composites, Motohiro Onishi,Hisashi Imai,Lei Jia,Junko Umeda,Katsuyoshi Kondoh, Materials Science & Technology 2015 (MS&T15), Columbus, USA, 2015/10
  • Effect of Fe and SiC Particle Addition on Mechanical Property and Corrosion Behavior of Powder Metallurgy Mg Alloy Composite, Shota Kariya,Junko Umeda,Hisashi Imai,Katsuyoshi Kondoh,Haruo Unosawa,Manuel Marya, Materials Science & Technology 2015 (MS&T15), Columbus, USA, 2015/10
  • Interfacial Structure Analysis on Direct Bonding Material of Metals with CFRP, Hisashi Imai,Katsuyoshi Kondoh,Takeru Izawa,Junko Umeda, Materials Science & Technology 2015 (MS&T15), Columbus, USA, 2015/10
  • High Temperature Mechanical Properties of P/M Cu/CNT Composite, Hisashi Imai,Katsuyoshi Kondoh,Junko Umeda, Materials Science & Technology 2015 (MS&T15), Columbus, USA, 2015/10
  • Carbon Nano-material Enhancing Strength of Aluminum Matrix Composite, Katsuyoshi Kondoh,Biao Chen,Hisashi Imai,Junko Umeda, Materials Science & Technology 2015 (MS&T15), Columbus, USA, 2015/10
  • 高濃度窒素固溶純チタン粉末押出材における高強度と高延性の両立, 三本 嵩哲,梅田 純子,近藤 勝義, （一社）日本機械学会2015年度年次大会, 札幌, 2015/09
  • 水素化物相による変形双晶の進展抑制によるα-Ti焼結押出材の高延性化, 近藤 勝義,三本 嵩哲,梅田 純子,今井 久志, （一社）日本鉄鋼協会第170回秋季講演大会, 福岡, 2015/09
  • SPS法により作製したTi/Mg接合材の腐食特性, パライパナポン パチャラ,刈屋 翔太,近藤 勝義,高橋 誠, （一社）溶接学会 平成27年度秋季全国大会, 札幌, 2015/09
  • 超音波振動を援用したCFRPと金属の異材接合界面の解析, 今井 久志,井澤 尊,梅田 純子,近藤 勝義, （一社）溶接学会 平成27年度秋季全国大会, 札幌, 2015/09
  • 各種アルミニウム材料のシングルモードファイバーレーザによる突合せ溶接時のキーホール挙動および欠陥生成機構, 中西 基,片山 聖二,川人 洋介,近藤 勝義,今井 久志,川上 博士,菖蒲 敬久, （一社）溶接学会 平成27年度秋季全国大会, 札幌, 2015/09
  • X線位相差法を用いたアルミニウム合金のシングルモードファイバーレーザ溶接時における割れ発生過程の解明, 横田 哲士,片山 聖二,川人 洋介,近藤 勝義,今井 久志,富沢 雅美,菖蒲 敬久, （一社）溶接学会 平成27年度秋季全国大会, 札幌, 2015/09
  • 極限環境下における水中レーザ貫通溶接に関する基礎研究, 氷見 太,片山 聖二,近藤 勝義,川人 洋介,水谷 正海, （一社）溶接学会 平成27年度秋季全国大会, 札幌, 2015/09
  • Mechanical Performance and Microstructure of Extruded Pure Ti Based Materials Reinforced with Nitrogen and Hydrogen via Powder Metallurgy Route, Takanori Mimoto,Junko Umeda,Katsuyoshi Kondoh, The 13th World Conference on Titanium (Ti-2015), San Diego, USA, 2015/08
  • Effect of Chromium Behavior on Mechanical and Electrical Properties of P/M Copper-Chromium Alloy Dispersed with VGCF, Hisashi Imai,Kuan-Yu Chen,Katsuyoshi Kondoh,Hung-Yin Tsai,Junko Umeda, 17th International Conference on Materials Science, Engineering and Manufacturing (ICMSEM 2015), Singapore, 2015/07
  • Direct bonding mechanism of metals with CFRP, H. Imai,K. Kondoh,J. Umeda,T. Izawa, The 6th International Symposium on Advanced Materials Development and Integration of Novel Structured Metallic and Inorganic Materials(AMDI-6), Tokyo, Japan, 2015/06
  • アルミニウム合金のシングルモードファイバーレーザ溶接時におけるキーホール挙動と欠陥生成機構, 中田 光紀,片山 聖二,川人 洋介,近藤 勝義,菖蒲 敬久,今井 久志,川上 博士, （一社）溶接学会 平成27年度春季全国大会, 東京, 2015/04
  • CFRPと金属の超音波接合界面の構造解析, 近藤 勝義,今井 久志,梅田 純子, 第5回6大学6研究所連携プロジェクト公開討論会, 東京, 2015/03
  • Ballistic Characterization of the Scalability of AMX602, Tyrone Jones,Katsuyoshi Kondoh, TMS 2015, Orland, USA, 2015/03
  • Comparing Strengthening Mechanisms of Vapor Grown Carbon Fiber vs. Titanium Carbide Reinforced PM Titanium, Franco Marius Staub,Katsuyoshi Kondoh,Junko Umeda,Hisashi Imai, TMS 2015, Orland, USA, 2015/03
  • Crack Formation in Powder Metallurgy CNT/Al Composites during Post Heat Treatment, Biao Chen,Lei Jia,Hisashi Imai,Katsuyoshi Kondoh, TMS 2015, Orland, USA, 2015/03
  • Strengthening Behavior and Mechanisms of Extruded Powder Metallurgy Pure Ti Materials Reinforced with Ubiquitous Light Elements, Takanori Mimoto,Junko Umeda,Katsuyoshi Kondoh, TMS 2015, Orland, USA, 2015/03
  • A small solute oxygen and silicon elements enhancing strength and ductility of pure titanium matrix composite, Katsuyoshi Kondoh,Lei Jia,Takanori Mimoto,Junko Umeda,Hisashi Imai, TMS 2015, Orland, USA, 2015/03
  • Biocompatibility of CNT-Ti composite surface with different nanomorphologies, E. Nishida,H. Miyaji,J. Umeda,K. Kondoh,H. Takita,B. Fugetsu,S. Tanaka,A. Kato,T. Akasaka,M. Kawanami, The International Association for Dental Research(IADR), Boston, USA, 2015/03
  • チタン表面のカーボンナノチューブ コーティングと生体適合性評価, 西田 絵利香,宮治 裕史,滝田 裕子,梅田 純子,近藤 勝義,古月 文志,田中 佐織,加藤 昭人,金山 和泉,川浪 雅光, 第13回日本再生医療学会総会, 京都, 2015/03
  • メタン－酸素同軸非予混合火炎を用いた籾殻灰中のSiO2回収技術に関する研究, 横田 哲士,林 潤,梅田 純子,中塚 記章,赤松 史光,近藤 勝義, 自動車技術会関西支部学生自動車研究会卒業研究発表講演会, 大阪, 2015/02
  • 籾殻の骨格を転写した多孔質構造バイオシリカを用いた超高耐震性コンクリート材の創製, 梅田 純子,近藤 勝義,高田 龍一, 第3回ネイチャー・インダストリー・アワード, 大阪, 2014/11
  • Direct Bonding Behavior of Pure Ti with Cast AZ31B and Extruded AZ31B Alloys by Spark Plasma Sintering, Patchara Pripanapong,Makoto Takahashi,Junko Umeda,Katsuyoshi Kondoh, The International Symposium on Visualization in Joining & Welding Science through Advanced Measurements and Simulation, in conjunction with Symposium on the Research Activities of Joint Usage / Research Center on Joining and Welding (Visual-JW 2014), Osaka Japan, 2014/11
  • Bioactive titanium surface using carbon nanotube net film, Hirofumi Miyaji,Erika Nishida,Junko Umeda,Katsuyoshi Kondoh,Hiroko Takita,Bunshi Fugetsu,Saori Tanaka,Akihito Kato,Tsukasa Akasaka,Masamitsu Kawanami, The International Symposium on Visualization in Joining & Welding Science through Advanced Measurements and Simulation, in conjunction with Symposium on the Research Activities of Joint Usage / Research Center on Joining and Welding (Visual-JW 2014), Osaka Japan, 2014/11
  • Direct bonding mechanism of metals with CFRP, H. Imai,T. Izawa,K. Kondoh,J. Umeda, The 5th International Symposium on Advanced Materials Development and Integration of Novel Structured Metallic and Inorganic Materials (AMDI-5) Conjunction with 6th IBB Frontier Symposium, Tokyo, Japan, 2014/11
  • 固気直接反応処理を施した純チタン粉末とその粉末押出材の特性, 三本 嵩哲,梅田 純子,近藤 勝義, （一社）軽金属学会第127回秋期大会, 東京, 2014/11
  • TiO2添加TiNi形状記憶粉末合金製ステントの有限要素解析, 早場 亮一,米澤 隆行,梅田 純子,今井 久志,近藤 勝義, （一社）粉体粉末冶金協会平成26年度秋季大会(第114回講演大会), 大阪, 2014/10
  • High-strength and Tough Carbon Nanotubes-reinforced Al Matrix Composites with Controlled Oxygen Content, Biao Chen,Lei Jia,Hisashi Imai,Junko Umeda,Makoto Takahashi,Katsuyoshi Kondoh, 2014/10
  • Microstructures and Mechanical Properties of Extruded Powder Metallurgy Pure Ti Materials by Gas-Solid Reaction Process, T. Mimoto,J. Umeda,K. Kondoh, Materials Science & Technology 2014 (MS&T14), Pittsburg, USA, 2014/10
  • Effect of Alloying Elements on Mechanical Properties and Electrical Conductivity of P/M Copper Alloys Dispersed with Vapor-grown Carbon Fiber, H. Imai,K. Kondoh, Materials Science & Technology 2014 (MS&T14), Pittsburg, USA, 2014/10
  • Microstructure and Mechanical Property of Shape Memory Alloy TiNi with Transition Metals by Powder Metallurgy, K. Kondoh,T. Yonezawa,H. Imai,J. Umeda,R. Souba, Materials Science & Technology 2014 (MS&T14), Pittsburg, USA, 2014/10
  • 固気直接反応法による高濃度窒素固溶チタン粉末押出材の創製, 三本 嵩哲,梅田 純子,近藤 勝義, （公社）日本金属学会 2014年秋期大会, 名古屋, 2014/09
  • SPS法により固化した高濃度窒素固溶チタン粉末材料の機械的性質, 三本 嵩哲,梅田 純子,近藤 勝義, （一社）溶接学会 平成26年度秋季全国大会, 富山, 2014/09
  • X線光電子分光法を用いた焼結バリアーの分解挙動の可視化, 近藤 勝義,木村 淳, （一社）溶接学会 平成26年度秋季全国大会, 富山, 2014/09
  • SPS法により作製したTi/Mg合金接合体の引張強度特性, パライパナポン パチャラ,高橋 誠,近藤 勝義, （一社）溶接学会 平成26年度秋季全国大会, 富山, 2014/09
  • Electrical/Thermal and Mechanical Properties of Powder Metallurgy Al Matrix Composites Reinforced by Carbon Nanotube, B. Chen,L. Jia,S. Li,H. Imai,M. Takahashi,K. Kondoh, ICM&P2014, Detroit, USA, 2014/06
  • Dependence of carbon structure on machinability of P/M high strength brass composite with graphite particle, H. Imai,K. Kondoh, ICM&P2014, Detroit, USA, 2014/06
  • 水素・酸素同時添加によって高強靭化した純チタン粉末押出材の組織構造と力学特性, 三本 嵩哲,梅田 純子,近藤 勝義, 平成26年度塑性加工春季講演会, つくば, 2014/06
  • Synthesis and Strength of Al4C3 Nanorods-Reinforced Al Matrix Composites by in-Situ Reaction during Powder Metallurgy Process from Al-Carbon Nanotube System, B. Chen,L. Jia,S. Li,H. Imai,M. Takahashi,K. Kondoh, 2014/06
  • 集合組織制御と水素化物の微細分散を利用した純チタン粉末押出材の高強靭化とその機構解明, 三本 嵩哲,梅田 純子,近藤 勝義, （一社）粉体粉末冶金協会平成26年度春季大会(第113回講演大会), 東京, 2014/06
  • Stability of the Strengthening Effect of in-situ Formed TiCp and TiBw in Powder Metallurgy Ti‐B4C Composites, L. Jia,B. Chen,S. Li,H. Imai,M. Takahashi,K. Kondoh, 2014/06
  • 添加元素が及ぼすVGCF分散銅基複合粉末材料の力学および電気特性, 今井 久志,近藤 勝義, （一社）粉体粉末冶金協会平成26年度春季大会(第113回講演大会), 東京, 2014/06
  • Interface analysis of Ti/AZ80 bonding material fabricated by spark plasma sintering, P. Pripanapong,H. Imai,J. Umeda,M. Takahashi,K. Kondoh, 2014/04
  • Tensile strength and fracture characteristic at interface of Ti/AZ80 bonding material, P. Pripanapong,H. Imai,J. Umeda,M. Takahashi,K. Kondoh, 2014/04
  • チタン表面のカーボンナノチューブコーティングと生体適合性評価, 西田 絵利香,宮治 裕史,滝田 裕子,梅田 純子,近藤 勝義,古月 文志,田中 佐織,加藤 昭人,金山 和泉,川浪 雅光, 第13回日本再生医療学会総会, 京都, 2014/03
  • ユビキタス軽元素を活用した純チタン粉末押出材の高強靭化設計とその特性評価, 三本 嵩哲,梅田 純子,近藤 勝義, （公社）日本金属学会2014年春期大会, 東京, 2014/03
  • 突線鈕式銅鐸破砕プロセスの金属工学的検討とその考古学的意義, 福永 伸哉,近藤 勝義, 桜井市纒向学研究センター 平成25年度定例研究集会, 桜井, 2014/02
  • Tribological Behavior of Un-bundled Multi-walled Carbon Nanotubes Coated on Pure Titanium Plate and Microstructure Analysis on Their Interface, J. Umeda,K. Kondoh, International Symposium on EcoTopia Science 2013(ISETS'13), Nagoya, Japan, 2013/12
  • Characteristics of lead-free machinable brass of powder metallurgy Cu-40 mass% Zn /1.0 mass% Mg with graphite particles, Hisashi Imai,Haruhiko Atsumi,Shufeng Li,Katsuyoshi Kondoh, 2013 2nd International Symposium on Quantum, Nano and Micro Technologies (ISQNM 2013), Singapore, 2013/12
  • Fe添加高強度TiNi形状記憶粉末合金の組織構造と機械的特性, 米澤 隆行,梅田 純子,今井 久志,近藤 勝義,早場 亮, （一社）粉体粉末冶金協会平成25年度秋季大会(第112回講演大会), 名古屋, 2013/11
  • インプロセス組織構造制御を適用した純チタン粉末押出材における特異力学挙動の解明, 三本 嵩哲,梅田 純子,近藤 勝義, （一社）軽金属学会第125回秋期大会, 横浜, 2013/11
  • Ni-rich TiNi形状記憶粉末合金押出材の組識構造と高強度発現機構の解明, 米澤 隆行,梅田 純子,今井 久志,近藤 勝義,早場 亮, 第64回塑性加工連合講演会, 大阪, 2013/11
  • 相変態制御下で熱間押出し加工を施した純チタン焼結在の力学特性と高強靭化機構の解明, 三本 嵩哲,李 樹豊,梅田 純子,近藤 勝義, 第64回塑性加工連合講演会, 大阪, 2013/11
  • 酸素固溶強化純チタン粉末材の強化機構, 近藤 勝義,三本 嵩哲,李 樹豊,今井 久志,梅田 純子, （一社）日本機械学会2013年度年次大会, 岡山, 2013/09
  • 水素を活用したインプロセス組織構造制御による純チタンの高次機能化, 三本 嵩哲,李樹 豊,梅田 純子,近藤 勝義, （一社）軽金属学会第124回春期大会, 富山, 2013/05
  • 固溶Ni量制御によるTiNi形状記憶粉末合金の高機能化と強化機構の解明, 米澤 隆行,梅田 純子,近藤 勝義,早場 亮一, （公社）日本金属学会2013年春期大会, 東京, 2013/03
  • 水素化チタン粉末押出材における〈0001〉集合組織形成と高強度・高延性化挙動, 三本 嵩哲,李 樹豊,梅田 純子,近藤 勝義, （公社）日本金属学会2013年春期大会, 東京, 2013/03
  • Sensitivity of the Tensile Ductility of Powder Metallurgy α, α+βand Nearly βTi Alloys to Oxygen, Yafeng Yang,Katsuyoshi Kondoh,Ma Qian, TMS2013, San Antonio，USA, 2013/03
  • Fabrication of High Performance Commercial Titanium Alloys by Spark Plasma Sintering, Yafeng Yang,Katsuyoshi Kondoh,Ma Qian, TMS2013, San Antonio，USA, 2013/03
  • The Initial Development of Next Generation Military Grade Titanium Alloys for Armor Applications, Tyrone Jones,Katsuyoshi Kondoh, TMS2013, San Antonio，USA, 2013/03
  • Microstructural and Mechanical Properties of Sintered and Extruded TiNi Alloys by Using TiNi Pre-Alloyed Powder with TiO2 Particles, Takayuki Yonezawa,Tomohiro Yoshimura,Junko Umeda,Katsuyoshi Kondoh,Ryouichi Souba, TMS2013, San Antonio，USA, 2013/03
  • Phase Transformation and Orientation in Direct Consolidation of TiH2 Powder and Their Effects on Tensile Behavior of P/M Extruded Ti Material, Takanori Mimoto,Katsuyoshi Kondoh,Junko Umeda, TMS2013, San Antonio，USA, 2013/03
  • Experimental and Theoretical Analysis of Oxygen Solid Solution Strengthening Behavior of P/M Pure Ti Material, Takanori Mimoto,Katsuyoshi Kondoh,Shufeng Li,Hisashi Imai,Junko Umeda, TMS2013, San Antonio，USA, 2013/03
  • TiH2粉末利用による純チタン基材料の省エネ製法とその性能評価, 三本 嵩哲,李 樹豊,梅田 純子,近藤 勝義, （一社）日本機械学会第20回機械材料・材料加工技術講演会（M&P2012）, 大阪, 2012/11
  • インク廃液リサイクルプロセスの構築に向けたTi/CB粒子複合材料化技術の開発とその評価, 三本 嵩哲,梅田 純子,近藤 勝義, （一社）日本機械学会第20回機械材料・材料加工技術講演会（M&P2012）, 大阪, 2012/11
  • 粉末冶金法によって作製したTi64/VGCF複合材の引張強度に及ぼす結晶配合性の影響, Patchara Pripanapong,李 樹豊,三本 嵩哲,梅田 純子,近藤 勝義, （一社）日本機械学会第20回機械材料・材料加工技術講演会（M&P2012）, 大阪, 2012/11
  • 黄銅チップの直接素形材化に適した固化成形法, 今井 久志,近藤 勝義,李 樹豊,上坂 美治,岡田 拓也, （一社）日本機械学会第20回機械材料・材料加工技術講演会（M&P2012）, 大阪, 2012/11
  • カーボンナノチューブコーティングチタンの生体応用, 宮治 裕史,西田 絵利香,田中 佐織,梅田 純子,近藤 勝義,古月 文志,金山 和泉,加藤 昭人,川浪 雅光, 日本バイオマテリアル学会大会シンポジウム2012, 仙台, 2012/11
  • 酸素固溶強化チタン材の耐食性評価, 高木 晃宏,梅田 純子,李 樹豊,近藤 勝義,砂田 聡, （社）粉体粉末冶金協会平成24年度秋季大会(第110回講演大会), 草津, 2012/11
  • 水素・酸素による組織構造制御を利用した高強度・高延性純チタン粉末押出材の機械的性質, 三本 嵩哲,李 樹豊,梅田 純子,近藤 勝義, （社）粉体粉末冶金協会平成24年度秋季大会(第110回講演大会), 草津, 2012/11
  • 酸素固溶強化チタン材の電気化学インピーダンス特性, 砂田 聡,高木 晃宏,梅田 純子,李 樹豊,近藤 勝義, （一社）軽金属学会第123回秋期大会, 千葉, 2012/11
  • Ti4Ni2O分散TiNi形状記憶粉末合金押出材の組織構造と機械的特性, 米澤 隆行,梅田 純子,近藤 勝義,早場 亮, （一社）スマートプロセス学会平成24年度秋季総合学術講演会, 大阪, 2012/11
  • Potential difference at interface between second phases and metal matrix measured by SKPFM, K. Kondoh,K. Funatsu,J. Umeda,H. Imai, The 5th International Symposium on Designing, Processing and Properties of Advanced Engineering Materials (ISAEM-2012), Toyohashi, Japan, 2012/11
  • TiO2粒子を添加したTiNi混合素粉末押出材の組織構造と機械的特性, 米澤 隆行,梅田 純子,近藤 勝義,早場 亮, 第63回塑性加工連合講演会, 北九州, 2012/11
  • P/M Ti metal matrix composites reinforced by carbon nanofiber and graphite particle, S. Li,B. Sun,T. Mimoto,H. Imai,K. Kondoh, 2012/11
  • Cr微量添加銅合金粉末を用いたVGCF分散複合押出材の熱・電気特性, 今井 久志,近藤 勝義,陳 冠宇, 第63回塑性加工連合講演会, 北九州, 2012/11
  • Preparation and biological evaluation of titanium coated with CNT-net, E. Nishida,H. Miyaji,J. Umeda,K. Kondoh,B. Fugetsu,S. Tanaka,A. Kato,I. Kanayama,M. Kawanami, The 98th Annual Meeting of American Academy of Periodontology in collaboration with the Japanese Society of Periodontology, Los Angels, USA, 2012/09
  • Mechanical Behavior and Microstructure of High Strength Pure Titanium Material via Direct Consolidation of TiH2-TiO2 Powder Mixture, T. Mimoto,J. Umeda,K. Kondoh, MSE2012, Darmstadt, Germany, 2012/09
  • Mechanical Properties of Ti-0.1wt% VGCF Composite with TiO2 Reinforcement via Powder Metallurgy Process and Hot-extrusion, S. Li,B. Sun,T. Mimoto,H. Imai,J. Umeda,K. Kondoh, MSE2012, Darmstadt, Germany, 2012/09
  • Tribological Property of Un-bundled Carbon Nanotubes Coated Titanium Plate, K. Kondoh,J. Umeda,B. Fugetsu, MSE2012, Darmstadt, Germany, 2012/09
  • TiO2粒子添加による高回復率TiNi形状記憶粉末合金の高強度化, 米澤 隆行,梅田 純子,近藤 勝義,早場 亮, （公社）日本金属学会 2012年秋期大会, 松山, 2012/09
  • TiO2粒子を添加したTiNi形状記憶粉末合金押出材の組織構造と機械的特性, 米澤 隆行,吉村 知浩,梅田 純子,近藤 勝義,早場 亮, （一社）日本機械学会2012年度年次大会, 金沢, 2012/09
  • X線照射による表面改質を施した純マグネシウムの腐食現象, 船津 恵介,梅田 純子,近藤 勝義, （一社）日本機械学会2012年度年次大会, 金沢, 2012/09
  • Surface Potential Controlled by Al Additive at Interface between Mg Matrix and CNTs, K. Funatsu,H. Fukuda,R. Takei,J. Umeda,K. Kondoh, The Fourth International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI 2012), Kurashiki, Japan, 2012/09
  • Strengthening Mechanism of Oxygen Solid Soluted Pure Titanium Powder Materials Consolidated by Extrusion, K. Kondoh,T. Mimoto,N. Nakanishi,J. Umeda, 3rd Asian Symposium on Materials and Processing, Chennai, India, 2012/08
  • Network-Structured MWCNTS Coatings and Its Tribological Behavior, K. Kondoh,J. Umeda,B. Fugetsu, 3rd Asian Symposium on Materials and Processing, Chennai, India, 2012/08
  • Carbon Nanofiber and Graphite Particle Reinforced Ti Composites via Powder Metallurgy and Hot Extrusion, S. Li,B. Sun,T. Mimoto,H. Imai,K. Kondoh, The 8th International Forum on Advanced Materials Science and Technology (IFAMST-2012), Fukuoka, Japan, 2012/08
  • Ballistic and Corrosion Analysis of New Military Grade Magnesium Alloys AMX602 and ZAXE1711 for Armor Applications, T.L. Jones,J.E. Labukas,K. Kondoh,B.E. Placzankis, 9th International Conference on Magnesium Alloys and their Applications, Vancouver, Canada, 2012/07
  • High-Strength Magnesium Alloy with Ultra-Fine Microstructures Using Rapid Solidification Process and Its Applications, K. Kondoh,A. Hamada,J. Umeda,H. Imai, Magnesium Powders & Composites:Technologies & Applications Part 3, PowderMet2012, Nashville, USA, 2012/06
  • TiO2粒子添加純チタン粉末押出材の組織構造と機械特性, 三本 嵩哲,中西 望,梅田 純子,近藤 勝義, 平成24年度塑性加工春季講演会, 小松, 2012/06
  • Utilization of Rice Husks as Biomass Resource in Myanmar, J. Umeda,K. Kondoh, 7th International Conference on Materials science and Technology (MSAT7), Bangkok, Thailand, 2012/06
  • Tribological Properties of Titanium Plate Coated with Carbon Nanotubes, J. Umeda,T. Mimoto,K. Kondoh,B. Fugetsu, 7th International Conference on Materials science and Technology (MSAT7), Bangkok, Thailand, 2012/06
  • チタン粉末押出材の力学特性に及ぼす焼結条件の影響, 孫 斌,李 樹豊,今井 久志,梅田 純子,近藤 勝義, （一社）スマートプロセス学会平成24年春季総合学術講演会, 大阪, 2012/05
  • TiH2粉末を原料とした純チタン押出材の集合組織と機械特性, 三本 嵩哲,梅田 純子,近藤 勝義, （一社）スマートプロセス学会平成24年春季総合学術講演会, 大阪, 2012/05
  • 黒鉛粒子添加高強度黄銅粉末合金におけるCr析出挙動と切削性, 今井 久志,李 樹豊,近藤 勝義,上坂 美冶,岡田 拓也,山本 浩士,高橋 基, （一社）スマートプロセス学会平成24年春季総合学術講演会, 大阪, 2012/05
  • VGCF Reinforced Ti Composites via Powder Metallurgy, B. Sun,S. Li,H. Imai,J. Umeda,K. Kondoh, 2012/05
  • Ti微量添加銅合金粉末を用いたVGCF分散複合材料の電気伝導特性, 今井 久志,近藤 勝義,陳 冠宇, （社）粉体粉末冶金協会平成24年度春季大会(第109回講演大会), 京都, 2012/05
  • 水素化チタン粉末を原料とした純チタン粉末固化材の組織構造と力学特性, 三本 嵩哲,梅田 純子,近藤 勝義, （一社）軽金属学会 第122春期大会, 福岡, 2012/05
  • Microstructure evolution and mechanical properties of double-sided friction stir welded AZ31B Mg alloy, Juan Chen,Yufeng Sun,Yoshiaki Morisada,Hidetoshi Fujii,Katsuyoshi Kondoh, 2012/04
  • SKPFMを用いたMg合金中の母相と金属間化合物界面における局所電位差計測, 船津 恵介,梅田 純子,近藤 勝義, （社）日本金属学会 2012年春期大会, 横浜, 2012/03
  • (Duplication :171行) The d, 2012/03
  • Microstructure Evolution of Friction Stir Welded Fine-grained Non-combustive Mg Alloy, J. Chen,H. Fujii,Y. Sun,Y. Morisada,K. Kondoh, International Symposium on Materials Science and Innovation for Sustainable Society (ECO-MATES 2011), Osaka, Japan, 2011/11
  • 粉末冶金法によるMg2Siの固相合成機構とMg-Mg2Si複合材料の創製, 孫 斌,李 樹豊,梅田 純子,近藤 勝義, （社）粉体粉末冶金協会平成23年度秋季大会(第108回講演大会), 大阪, 2011/10
  • TiH2粉末を原料とした直接固化プロセスによる廉価純チタン材の創製とその特性, 三本 嵩哲,梅田 純子,近藤 勝義, （社）粉体粉末冶金協会平成23年度秋季大会(第108回講演大会), 大阪, 2011/10
  • 粉末冶金法を利用したCu-40%Zn+Mg焼結押出材の創製と諸特性, 渥美 春彦,今井 久志,李 樹豊,近藤 勝義,上坂 美治,小島 明倫, （社）粉体粉末冶金協会平成23年度秋季大会(第108回講演大会), 大阪, 2011/10
  • チタンと錫を微量添加した析出強化黄銅合金粉末押出材の創製と性能, 李 樹豊,今井 久志,渥美 春彦,近藤 勝義,上坂 美治,小島 明倫,山本 浩士, （社）粉体粉末冶金協会平成23年度秋季大会(第108回講演大会), 大阪, 2011/10
  • Ti微量添加銅合金粉末を用いた炭素系ナノ粒子分散複合材料の組織と諸特性, 今井 久志,近藤 勝義, （社）粉体粉末冶金協会平成23年度秋季大会(第108回講演大会), 大阪, 2011/10
  • The Characteristics of High Strength and Lead-Free Machinable α-β Duplex Phase Brass Cu-40Zn-Cr-Fe-Sn-Bi Alloy, H. Atsumi,H. Imai,S. Li,K. Kondoh,Y. Kousaka,A. Kojima, Materials Science & Technology (MS&T) 2011, Columbus USA, 2011/10
  • Microstructural and Mechanical Properties of the Extruded α-β Duplex Phase Brass Cu-40Zn-Ti Alloy, H. Atsumi,H. Imai,S. Li,K. Kondoh,Y. Kousaka,A. Kojima, Materials Science & Technology (MS&T) 2011, Columbus USA, 2011/10
  • Microstructural and Mechanical Behavior of Al-Mg-Si Alloy Composite Reinforced with Carbon Nanotubes, K. Kondoh,H. Fukuda,J. Umeda,B. Fugetsu, Materials Science & Technology (MS&T) 2011, Columbus USA, 2011/10
  • 湿式プロセスを含む粉末冶金法によって作製した炭素ナノ粒子強化純チタン基複合材料の組織と力学特性, 三本 嵩哲,近藤 勝義, （社）日本鉄鋼協会 第162回秋季講演大会, 大阪, 2011/09
  • Mgを添加したCu-40Zn黄銅合金押出材の組織構造と機械的特性, 渥美 春彦,今井 久志,李 樹豊,近藤 勝義,上坂 美治,小島 明倫, 日本機械学会2011年度年次大会, 東京, 2011/09
  • 黒インク廃液中のカーボンブラックを利用した複合チタン粉末とその粉末押出材の特性, 三本 嵩哲,Thotsaphon Threrujirapapong,梅田 純子,近藤 勝義, 日本機械学会2011年度年次大会, 東京, 2011/09
  • 電子励起による表面改質を施したマグネシウムの腐食現象, 船津 恵介,竹井 怜,梅田 純子,近藤 勝義, 日本機械学会2011年度年次大会, 東京, 2011/09
  • Effect of Material Flow by Double-sided FSW on Mechanical Properties of Mg Alloys, 2011/08
  • Effect of Heat Treatment on Phase Transformation and Precipitation Behavior of Cu40Zn-1.0 Wt% Ti Brass via Powder Metallurgy, Shufeng Li,Hisashi Imai,Akimichi Kojima,Yoshiharu Kosaka,Koji Yamamoto,Motoi Takahashi,Haruhiko Atsumi,Katsuyoshi Kondoh, International Conference on Chemical Engineering and Advanced Materials (CEAM2011), Changsha, China, 2011/05
  • 純チタン粉末固化体に分散する酸化チタン粒子の熱分解挙動, 中西 望,三本 嵩哲,近藤 勝義, （社）軽金属学会 第120回春期大会, 名古屋, 2011/05
  • 黒インク廃液中のカーボンブラックを利用したチタン基複合材料の機械的特性, 三本 嵩哲,中西 望,吉村 知浩,ツゥリージィラポパン,梅田 純子,近藤 勝義, （社）軽金属学会 第120回春期大会, 名古屋, 2011/05
  • 電子励起したMg最表面での腐食現象, 船津 恵介,竹井 怜,梅田 純子,近藤 勝義, （社）軽金属学会 第120回春期大会, 名古屋, 2011/05
  • Friction stir welding of fine-grained non-combustive magnesium alloy, Juan Chen,H. Fujii,Yufeng Sun,Katsuyoshi Kondoh, 2011/04
  • Experimental and FEM evaluation of mechanical properties of hot extruded rapidly solidified powder metallurgy Mg-Al-Mn-Ca alloy, Ayman Elsayed,Katsuyoshi Kondoh,Ninshu Ma, Visual-JW2010, Osaka, Japan, 2010/11
  • CNTを複合させたAZ31Bマグネシウム合金の電気化学特性, 津川 拓矢,砂田 聡,近藤 勝義, （社）軽金属学会 第119回秋期大会, 新潟, 2010/11
  • マグネシウム合金AZ61/Carbon nanotube複合材料の機械的特性評価, 福田 博之,近藤 勝義,古月 文志, （社）軽金属学会 第119回秋期大会, 新潟, 2010/11
  • RCP加工を施したマグネシウム合金AZ31の疲労挙動, 宮下 幸雄,下津屋 慶明,近藤 勝義, （社）軽金属学会 第119回秋期大会, 新潟, 2010/11
  • Ti粒子分散Mg-Al合金の腐食現象に及ぼす界面反応層の影響, 中西 望,竹井 怜,近藤 勝義, （社）軽金属学会 第119回秋期大会, 新潟, 2010/11
  • マグネシウム合金AZ61/Carbon nanotube 複合材料の機械的特性およびMg-CNT界面の構造解析, 福田 博之,近藤 勝義,古月 文志, （社）粉体粉末冶金協会平成22年度秋季大会(第106回講演大会), 京都, 2010/11
  • Contribution of Ti addition to the mechanical properties of high-strength Cu-40Zn brass by powder metallurgy, S. Li,H. Imai,K. Kondoh,Y. Kosaka,A. Kojima,K. Yamamoto,M. Takahashi, 2010/11
  • CrFeSn添加高強度黄銅合金粉末と黒鉛粒子を利用した高強度・快削性黄銅合金の開発, 今井 久志,李 樹豊,近藤 勝義,上坂 美治,小島 明倫,山本 浩士,高橋 基, （社）粉体粉末冶金協会平成22年度秋季大会(第106回講演大会), 京都, 2010/11
  • チタン粒子を添加した高強度黄銅合金粉末押材の創製及び性能, 近藤 勝義,李 樹豊,今井 久志,渥美 春彦,上坂 美治,小島 明倫, （社）日本鉄鋼協会 第160回秋季講演大会, 札幌, 2010/09
  • Cu-40Zn-Ti系黄銅合金押出材の組織構造と機械的特性, 渥美 春彦,今井 久志,李 樹豊,近藤 勝義,上坂 美治,小島 明倫, （社）日本金属学会 2010年秋期大会, 札幌, 2010/09
  • Mg-Ca化合物を含むMg合金の腐食現象に及ぼす局所界面での表面電位差の影響, 竹井 怜,梅田 純子,近藤 勝義, （社）日本金属学会 2010年秋期大会, 札幌, 2010/09
  • Hot Extrusion of Pure Titanium Reinforced with Carbon Nanotubes, Thotsaphon Threrujirapapong,Katsuyoshi Kondoh,Hisashi Imai,Junko Umeda,Bunshi Fugetsu, The 13th International Conference on Metal Forming (Metal Forming 2010), Toyohashi, Japan, 2010/09
  • Effects of Ti Addition on Microstructure and Mechanical Properties of Extruded Cu40Zn-2.2Bi Brass by Powder Metallurgy, Shufeng Li,Hisashi Imai,Haruhiko Atsumi,Katsuyoshi Kondoh, The 13th International Conference on Metal Forming (Metal Forming 2010), Toyohashi, Japan, 2010/09
  • Microstructure and Mechanical Properties of Hot Extruded ZK61 Alloy Produced by Rapid Solidification Powder Metallurgy, Ayman Elsayed,Hisashi Imai,Junko Umeda,Katsuyoshi Kondoh, The 13th International Conference on Metal Forming (Metal Forming 2010), Toyohashi, Japan, 2010/09
  • Effect of Bismuth Addition on Machinability and Mechanical Properties of Lead-Free Brass via Powder Metallurgy Process, Hisashi Imai,Katsuyoshi Kondoh,Shufeng Li,Haruhiko Atsumi,Yoshiharu Kosaka,Akimichi Kojima, The 13th International Conference on Metal Forming (Metal Forming 2010), Toyohashi, Japan, 2010/09
  • 粉末冶金法を用いた酸化チタン分散強化型チタン材料の強度特性評価, 吉村 知浩,Threrujirapapong Thotsaphon,近藤 勝義, 日本機械学会2010年度年次大会, 名古屋, 2010/09
  • CNT/Mg2Si/MgO 複合分散強化マグネシウム基焼結材料の組識と摩擦摺動特性, 近藤 勝義,梅田 純子, 日本機械学会2010年度年次大会, 名古屋, 2010/09
  • Microstructure and Mechanical Properties of High Strength Brass Alloy with Some Elements, Haruhiko Atsumi,Hisashi Imai,Li Shufeng,Yoshiharu Kousaka,Akimichi Kojima,Katsuyoshi Kondoh, The 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2010/08
  • Mechanical Properties of Oxide Dispersion Strengthened Pure Titanium Produced by Powder Metallurgy Method, Tomohiro Yoshimura,Thotsaphon Threrujirapapong,Hisashi Imai,Katsuyoshi Kondoh, The 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2010/08
  • High Strength and Lead-free Machinable Brass by Powder Metallurgy Process, Hisashi Imai,Shufeng Li,Yoshiharu Kosaka,Akimichi Kojima,Haruhiko Atsumi,Katsuyoshi Kondoh, The 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2010/08
  • 黒鉛粒子分散を利用した完全鉛フリー快削性・高強度黄銅合金押出材の特性, 今井 久志,李 樹豊,上坂 美治,小島 明倫,近藤 勝義,渥美 春彦, 第41回塑性加工春季講演会, 東京, 2010/05
  • カーボンナノチューブを含有した焼結AZ31Bマグネシウム複合材の電気化学特性, 津川 拓矢,砂田 聡,近藤 勝義,真島 一彦, （社）粉体粉末冶金協会平成22年度春季大会(第105回講演大会), 東京, 2010/05
  • 粉末冶金法により作製した酸化チタン分散強化純チタン押出材の強度特性, 吉村 知浩,Thotsaphon Threrujirapapong,近藤 勝義, （社）粉体粉末冶金協会平成22年度春季大会(第105回講演大会), 東京, 2010/05
  • チタン粒子を添加した鉛フリー快削性黄銅合金粉末押出材の創製及び性能, 李 樹豊,今井 久志,渥美 春彦,近藤 勝義,上坂 美治,小島 明倫,山本 浩士,高橋 基, （社）粉体粉末冶金協会平成22年度春季大会(第105回講演大会), 東京, 2010/05
  • Cr添加黄銅合金粉末と黒鉛粒子の混合粉末焼結体におけるCr析出挙動と切削性, 今井 久志,李 樹豊,上坂 美治,小島 明倫,近藤 勝義,渥美 春彦, （社）粉体粉末冶金協会平成22年度春季大会(第105回講演大会), 東京, 2010/05
  • 酸化チタン粒子分散強化チタン粉末押出材の機械的特性, 吉村 知浩,Thotsaphon Threrujirapapong,近藤 勝義, （社）軽金属学会 第118回春期大会, 大阪, 2010/05
  • AZ31B/Carbon nanotube 複合材料の腐食現象, 福田 博之,近藤 勝義,Jerzy.A.Szpunar,Richard Chromik, （社）軽金属学会 第118回春期大会, 大阪, 2010/05
  • RCP加工を施した急冷凝固AZ31B合金粗粉末の押出材の組織と力学特性, 今井 久志,近藤 勝義, （社）軽金属学会 第118回春期大会, 大阪, 2010/05
  • マグネシウム合金中の異材界面における表面電位差と腐食現象の関係, 竹井 怜,今井 久志,梅田 純子,近藤 勝義, （社）軽金属学会 第118回春期大会, 大阪, 2010/05
  • CNTを含有したAZ31B Mg合金複合材の腐食特性, 津川 拓矢,砂田 聡,近藤 勝義, （社）日本金属学会 2010年春期大会, 筑波, 2010/03
  • 酸化チタン分散強化型純チタン粉末材料の機械的特性, 吉村 知浩,Thotsaphon Threrujirapapong,近藤 勝義, （社）日本金属学会 2010年春期大会, 筑波, 2010/03
  • Cr添加黄銅合金粉末と黒鉛粒子を利用した完全鉛フリー高強度・快削性黄銅合金の開発, 今井 久志,李 樹豊,近藤 勝義,上坂 美治,小島 明倫, （社）日本金属学会 2010年春期大会, 筑波, 2010/03
  • 反復塑性加工法を施した急冷凝固Mg合金粗粉末の押出材の組識と力学特性, 今井 久志,近藤 勝義, （社）日本金属学会 2010年春期大会, 筑波, 2010/03
  • 水素がマグネシウム合金による純チタンの高温濡れ性に与える影響, 中西 望,今井 久志,近藤 勝義, （社）軽金属学会 第117回秋期大会, 東京, 2009/11
  • 表面電位差によるMg合金中の析出物の腐食評価, 竹井 怜,今井 久志,近藤 勝義, （社）軽金属学会 第117回秋期大会, 東京, 2009/11
  • アトマイズ法を用いた純チタン粒子分散マグネシウム複合粉末とその押出材の特性, 近藤 勝義,今井 久志,梅田 純子,川上 雅史, （社）軽金属学会 第117回秋期大会, 東京, 2009/11
  • CrとFeを添加した黄銅合金押出材の内部組織と機械的強度, 渥美 春彦,今井 久志,李 樹豊,近藤 勝義,上坂 美治,小島 明倫, 第60回塑性加工連合講演会, 長野, 2009/10
  • 酸化チタン粒子分散強化純チタン粉末材料の強度特性, 吉村 知浩,今井 久志,近藤 勝義, 第60回塑性加工連合講演会, 長野, 2009/10
  • ビスマス・黒鉛添加黄銅粉末を利用した完全鉛フリー快削性黄銅合金の特性, 今井 久志,李 樹豊,上坂 美治,小島 明倫,渥美 春彦,近藤 勝義, 第60回塑性加工連合講演会, 長野, 2009/10
  • 粉末冶金法で作製したBS40CrFeSn合金押出材の微細構造および機械強度, 李 樹豊,今井 久志,近藤 勝義,渥美 春彦, （社）粉体粉末冶金協会 平成21年度秋季大会 (第104回講演大会), 名古屋, 2009/10
  • 粉体プロセスを利用したビスマス・黒鉛添加黄銅合金押出材の機械的性質と切削性評価, 今井 久志,近藤 勝義,李 樹豊,渥美 春彦,上坂 美治,小島 明倫, （社）粉体粉末冶金協会 平成21年度秋季大会 (第104回講演大会), 名古屋, 2009/10
  • 酸化カルシウムを添加した耐熱性マグネシウム複合材料の開発（第二報 機械的特性）, 榎並 啓太郎,大原 正樹,五十嵐 貴教,藤田 淳司,近藤 勝義, （社）日本金属学会 2009年秋期大会, 京都, 2009/09
  • マグネシウム合金による純チタンの高温濡れ性, 中西 望,今井 久志,近藤 勝義, （社）日本金属学会 2009年秋期大会, 京都, 2009/09
  • Cu-40Zn-Cr-Fe-Sn系黄銅合金の組織と機械的特性, 渥美 春彦,今井 久志,近藤 勝義, （社）日本金属学会 2009年秋期大会, 京都, 2009/09
  • SKPFMを用いたMg合金中の析出物における表面電位と腐食現象の関係, 竹井 怜,今井 久志,近藤 勝義, （社）日本金属学会 2009年秋期大会, 京都, 2009/09
  • 酸化チタン粒子分散強化純チタン材料の強度特性, 吉村 知浩,T.Threrujirapapong,今井 久志,近藤 勝義, （社）日本金属学会 2009年秋期大会, 京都, 2009/09
  • 酸化カルシウムを添加した耐熱性マグネシウム複合材料の開発（第一報 固相反応における組織構造解析), 藤田 淳司,近藤 勝義,榎並 啓太郎,大原 正樹,五十嵐 貴教, （社）日本金属学会 2009年秋期大会, 京都, 2009/09
  • 粉体プロセスによる黒鉛・ビスマス添加完全鉛フリー快削性黄銅合金の開発, 今井 久志,上坂 美治,小島 明倫,近藤 勝義, （社）日本金属学会 2009年秋期大会, 京都, 2009/09
  • Ti粒子分散Mg基複合粉末とその焼結押出材の組織および力学特性, 近藤 勝義,川上 雅史,今井 久志,梅田 純子, （社）日本金属学会 2009年秋期大会, 京都, 2009/09
  • バルクメカニカルアロイング法による高強度耐熱マグネシウム複合材料の開発, 榎並 啓太郎,大原 正樹,五十嵐 貴教,藤田 淳司,近藤 勝義, 日本機械学会2009年度年次大会, 盛岡, 2009/09
  • 酸化カルシウムとマグネシウム合金のバルクメカニカルアロイングによる固相反応, 藤田 淳司,近藤 勝義,榎並 啓太郎,大原 正樹,五十嵐 貴教, 日本機械学会2009年度年次大会, 盛岡, 2009/09
  • ビスマス添加黄銅粉体固化成形体の機械的性質とドリル切削性評価, 今井 久志,上坂 美治,小島 明倫,近藤 勝義, 日本機械学会2009年度年次大会, 盛岡, 2009/09
  • 酸化物分散および微細組織化によるチタン粉末固化材の強度特性, 吉村 知浩,今井 久志,近藤 勝義, 日本機械学会2009年度年次大会, 盛岡, 2009/09
  • Mechanical Properties of Roll Compaction Processed Pure Ti, Tomohiro YOSHIMURA,Hisashi IMAI,Katsuyoshi KONDOH, ICMAT & IUMRS-ICA 2009, Singapore, 2009/06
  • Characteristics of Hot Extruded Composite Metals Dispersed with Un-bundled CNTs, Hisashi IMAI,Hiroyuki FUKUDA,Bunshi FUGETSU,Katsuyoshi KONDOH, ICMAT & IUMRS-ICA 2009, Singapore, 2009/06
  • バルクメカニカルアロイングによる耐熱性マグネシウム複合材料の開発（第二報 機械的特性）, 榎並 啓太郎,大原 正樹,五十嵐 貴教,藤田 淳司,近藤 勝義, （社）粉体粉末冶金協会平成21年度春季大会（第103回講演大会）, 京都, 2009/06
  • バルクメカニカルアロイングによる耐熱性マグネシウム複合材料の開発（第一報 固相反応によるAl2Caの合成と構造解析）, 藤田 淳司,近藤 勝義,榎並 啓太郎,大原 正樹,五十嵐 貴教, （社）粉体粉末冶金協会平成21年度春季大会（第103回講演大会）, 京都, 2009/06
  • 結晶粒微細化と酸化物のその場合成によるチタン粉体固化材の高強度化, 吉村 知浩,今井 久志,近藤 勝義, （社）粉体粉末冶金協会平成21年度春季大会（第103回講演大会）, 京都, 2009/06
  • Mechanical Properties of Powder Metallurgy non-combustive Mg-Al-Mn-Ca alloy Produced by Rapid Solidification, A. Elsayed,M. Kawakami,H. Fukuda,H. Imai,J. Umeda,K. Kondoh, 2009/06
  • 粉体プロセスによるビスマス添加黄銅合金押出材の機械的特性と切削性評価, 今井 久志,上坂 美治,小島 明倫,近藤 勝義, （社）粉体粉末冶金協会平成21年度春季大会（第103回講演大会）, 京都, 2009/06
  • 単分散多層カーボンナノチューブ被覆チタン粉末を用いた複合材料の力学特性と組識, 近藤 勝義,T.Threrujirapapong,今井 久志,梅田 純子,古月 文志, （社）粉体粉末冶金協会平成21年度春季大会（第103回講演大会）, 京都, 2009/06
  • Friction behavior of CNT‐reinforced Ti composite materials, T.Threrujirapapong,K. Kondoh,H. Imai,J. Umeda,T. Yoshimura, 2009/06
  • Effect of Hot Extrusion Temperature on Rapidly Solidified Mg-Al-Mn-Ca Alloy Consolidated Via both Cold Compaction and Spark Plasma Sintering, Ayman ELSAYED,Masashi KAWAKAMI,Hiroyuki FUKUDA,Hisashi IMAI,Katsuyoshi Kondoh, 2009/05
  • 酸化カルシウムを添加したマグネシウム複合粉末材料の開発 (第二報 機械的特性), 榎並 啓太郎,大原 正樹,五十嵐 貴教,藤田 淳司,近藤 勝義, 平成21年度(第40回)塑性加工春季講演会, 京都, 2009/05
  • 酸化カルシウムを添加したマグネシウム複合粉末材料の開発（第一報 固相反応における組織構造変化）, 藤田 淳司,近藤 勝義,榎並 啓太郎,大原 正樹,五十嵐 貴教, 平成21年度(第40回)塑性加工春季講演会, 京都, 2009/05
  • Bi添加黄銅粉末を利用した完全鉛フリー快削性黄銅合金の切削性, 今井 久志,上坂 美治,小島 明倫,近藤 勝義, 平成21年度(第40回)塑性加工春季講演会, 京都, 2009/05
  • RCP加工による純チタン粉末の結晶粒微細化と酸化物分散強化, 吉村 知浩,今井 久志,近藤 勝義, 平成21年度(第40回)塑性加工春季講演会, 京都, 2009/05
  • Fabrication of Ti/CNTs metal matrix composite via powder metallurgy and its mechanical, T. Threrujirapapong,K. Kondoh,H. Imai,T. Yoshimura, 2009/05
  • RCPによる純チタン粉末の結晶粒微細化と酸化物分散強化, 吉村 知浩,今井 久志,近藤 勝義, （社）軽金属学会 116回春期大会, 登別, 2009/05
  • マグネシウムによる純チタンの高温濡れ現象, 近藤 勝義,川上 雅史,今井 久志,梅田 純子,藤井 英俊, （社）軽金属学会 116回春期大会, 登別, 2009/05
  • Tribology of Pure Ti Reinforced with Multi-wall Carbon nanotubes, 2009/03
  • 純チタンの結晶粒微細化と酸化物分散強化, 吉村 知浩,今井 久志,近藤 勝義, （社）日本金属学会 2009年春期大会, 東京, 2009/03
  • 急冷凝固マグネシウム粗粉末を用いた押出材の組織と力学, 今井 久志,エルサイドアイマンハマダ,川上 雅史,近藤 勝義, （社）日本金属学会 2009年春期大会, 東京, 2009/03
  • マグネシウムによる純チタンの高温濡れ性, 近藤 勝義,川上 雅史,今井 久志,藤井 英俊, （社）日本金属学会 2009年春期大会, 東京, 2009/03
  • 粉体プロセスを用いたCNT 単分散マグネシウム基複合材料の組織と力学特性, 近藤 勝義,福田 博之,今井 久志,古月 文志, （社）日本金属学会 2009年春期大会, 東京, 2009/03
  • 高強靭性マグネシウム合金を用いた片側支柱付きKAFO開発, 藤井 徳雄,金子 貫太郎,松田 靖史,齋藤 聡佳,大門 満,石田 晃一,杉野 泰彦,濱田 幹和,近藤 勝義, 第24回日本義肢装具学会学術大会, 東京, 2008/11
  • 高強靭性マグネシウム合金製片側支柱付きKAFO材料の試作, 松田 靖史,齋藤 聡佳,石田 晃一,大門 満,杉野 泰彦,濱田 幹和,金子 貫太郎,藤井 徳雄,近藤 勝義, 第24回日本義肢装具学会学術大会, 東京, 2008/11
  • 籾殻由来シリカとマグネシウムとの固相反応挙動解析, 梅田 純子,近藤 勝義, 第19回廃棄物学会研究発表会, 京都, 2008/11
  • 放電プラズマ焼結法を用いた黒鉛添加完全鉛フリー快削性黄銅粉末押出材の開発, 今井 久志,近藤 勝義,上坂 美治,小島 明倫, （社）粉体粉末冶金協会 平成20年度秋季大会(第102回講演大会), 福岡, 2008/11
  • 耐衝撃性マグネシウム合金の開発, 堀田 真,廖 金孫,亀谷 博仁,金子 貫太郎,近藤 勝義, （社）粉体粉末冶金協会 平成20年度秋季大会(第102回講演大会), 福岡, 2008/11
  • CNT内包型多孔質アモルファスシリカを用いたマグネシウム基粉末複合材料の創製と摩擦摺動特性, 近藤 勝義,梅田 純子,今井 久志,古月 文志, （社）粉体粉末冶金協会 平成20年度秋季大会(第102回講演大会), 福岡, 2008/11
  • 炭素系ナノ粒子の孤立単分散化によるチタン基粉末複合材料の高強度・高靭性化, 近藤 勝義,Thotsaphon Threrujirapapong,今井 久志,梅田 純子,古月 文志, （社）粉体粉末冶金協会 平成20年度秋季大会(第102回講演大会), 福岡, 2008/11
  • 固相合成を利用した非晶質シリカとマグネシウムからの金属基複合材料の創製, 近藤 勝義,梅田 純子,今井 久志, （社）粉体粉末冶金協会 平成20年度秋季大会(第102回講演大会), 福岡, 2008/11
  • Ti粒子分散Mg‐Al系複合粉末押出材の界面構造と力学特性, 近藤 勝義,川上 雅史,今井 久志,梅田 純子, （社）粉体粉末冶金協会 平成20年度秋季大会(第102回講演大会), 福岡, 2008/11
  • Ti粒子分散Mg基複合粉末押出材の力学特性と組織, 川上 雅史,今井 久志,梅田 純子,近藤 勝義, （社）粉体粉末冶金協会 平成20年度秋季大会(第102回講演大会), 福岡, 2008/11
  • RCP加工を施した純Ti粉末およびその押出材における組織構造と力学特性, 吉村 知浩,近藤 勝義,今井 久志,Threpujirapapong Thotsaphon, （社）粉体粉末冶金協会 平成20年度秋季大会(第102回講演大会), 福岡, 2008/11
  • Ti粒子分散Mg基複合粉末を用いて作製された押出材の力学特性と組織, 川上 雅史,近藤 勝義,今井 久志, 59回塑性加工連合講演会, 広島, 2008/11
  • 粉体プロセスによる完全鉛フリー快削性黄銅合金の特性 -黒鉛添加黄銅粉末押出材の機械的性質と切削性-, 今井 久志,近藤 勝義,上坂 美治,小島 明倫, 59回塑性加工連合講演会, 広島, 2008/11
  • 急冷凝固マグネシウム合金粉末押出材の組織と力学特性, 近藤 勝義,El-Sayed Ayman Hamada,川上 雅史,今井 久志, 59回塑性加工連合講演会, 広島, 2008/11
  • 急冷凝固粉末を用いたマグネシウム押出合金における組織と疲労強度の関係, 益田 興佑,近藤 勝義,今井 久志,川上 雅史,Elsayed Ayman, 第52回日本学術会議材料工学連合講演会, 京都, 2008/10
  • RCP加工による純チタンの力学的特性と組織変化, 吉村 知浩,近藤 勝義,今井 久志,T. Threrujirapapong, 第52回日本学術会議材料工学連合講演会, 京都, 2008/10
  • アトマイズ法により作製したTi粒子分散Mg基複合粉末押出材の力学特性と組織, 川上 雅史,近藤 勝義,今井 久志, 第52回日本学術会議材料工学連合講演会, 京都, 2008/10
  • (Duplication :73行) Micro, 2008/10
  • Microstructure and mechanical properties of hot extruded Mg-Al-Mn-Ca alloy produced by rapid solidification powder, 2008/10
  • 放電プラズマ焼結法を用いた6-4黄銅粉末押出材の特性, 今井 久志,近藤 勝義,上坂 美治,小島 明倫, 第52回日本学術会議材料工学連合講演会, 京都, 2008/10
  • 孤立単分散カーボンナノチューブ被覆金属基複合粉末の特性解析, 近藤 勝義,福田 博之,今井 久志,古月 文志, 第52回日本学術会議材料工学連合講演会, 京都, 2008/10
  • 粉体プロセスを用いたCNT 単分散金属基複合材料の力学特性, 近藤 勝義,T. Threrujirapapong,今井 久志,古月 文志, 日本金属学会2008年秋期大会,, 2008/09
  • Ti 粒子分散Mg 基複合粉末の押出固化成形と力学特性, 近藤 勝義,川上 雅史,今井 久志, 日本金属学会2008年秋期大会,, 2008/09
  • SWAP法を用いて作製されたAZ31焼結押出材の腐食特性, 川村 貴人,砂田 聡,近藤 勝義,能登 谷久公,真島 一彦, 日本金属学会2008年秋期大会,, 2008/09
  • CNT孤立単分散型チタン粉末複合材料の力学特性, 近藤 勝義,Thotsaphon Threrujirapapong, （社）日本鉄鋼協会 第156回秋期講演大会, 熊本, 2008/09
  • 粉体プロセスによる黒鉛添加完全鉛フリー快削性黄銅合金の特性, 今井 久志,近藤 勝義,上坂 美治,小島 明倫, 日本機械学会2008年度年次大会, 横浜, 2008/08
  • 遷移金属を微量添加した黄銅合金粉末押出材の機械的挙動とその組織, 近藤 勝義,今井 久志,片野 元,上坂 美治,小島 明倫, 日本機械学会2008年度年次大会, 横浜, 2008/08
  • 単分散CNT被覆金属複合粉末とその焼結固化体の特性, 近藤 勝義,今井 久志,福田 博之,横田 友佑,沖本 邦郎, 日本機械学会2008年度年次大会, 横浜, 2008/08
  • カーボンナノチューブの孤立単分散法により作製した金属複合粉末, 近藤 勝義,今井 久志,福田 博之,横田 祐介,沖本 邦郎,古月 文志, （社）粉体粉末冶金協会 平成20年度春季大会(第101回講演大会), 東京, 2008/05
  • 籾殻から抽出した非晶質シリカ粒子の特性, 近藤 勝義,梅田 純子,道浦 吉貞, （社）粉体粉末冶金協会 平成20年度春季大会(第101回講演大会), 東京, 2008/05
  • RCP加工を施したAZ31B粉体押出材における集合組織と強度異方性の関係, 近藤 勝義,川端 健詞,小栗 孝通, （社）粉体粉末冶金協会 平成20年度春季大会(第101回講演大会), 東京, 2008/05
  • 放電プラズマ焼結法を用いた完全鉛フリー快削性黄銅粉末押出材の開発, 今井 久志,近藤 勝義,上坂 美治,小島 明倫, （社）粉体粉末冶金協会 平成20年度春季大会(第101回講演大会), 東京, 2008/05
  • 水アトマイズ黄銅粉末押出材の機械的特性に及ぼす添加元素の影響, 片野 元,近藤 勝義,今井 久志,上坂 美治,小島 明倫, （社）粉体粉末冶金協会 平成20年度春季大会(第101回講演大会), 東京, 2008/05
  • CNT孤立単分散マグネシウム複合粉末および押出材の特性, 福田 博之,今井 久志,近藤 勝義,古月 文志, （社）粉体粉末冶金協会 平成20年度春季大会(第101回講演大会), 東京, 2008/05
  • CNT単分散銅粉末押出材の組織解析と力学特性, 近藤 勝義,今井 久志,横田 祐介,沖本 邦郎,古月 文志, 第39回塑性加工春季講演会, 千葉, 2008/05
  • 粉体プロセスによる完全鉛フリー快削性黄銅合金の特性 -ビレット固化条件と押出材の機械的性質, 今井 久志,近藤 勝義,上坂 美治,小島 明倫, 第39回塑性加工春季講演会, 千葉, 2008/05
  • Cu-40Zn-X系合金粉末の熱間押出材における機械的挙動とその組織, 片野 元,近藤 勝義,今井 久志,上坂 美治,小島 明倫, 第39回塑性加工春季講演会, 千葉, 2008/05
  • 孤立単分散カーボンナノチューブにより被覆したマグネシウム複合粉末の特性, 近藤 勝義,福田 博之,今井 久志,古月 文志, 114回軽金属学会春期大会, 愛媛, 2008/05
  • Microstructures and Mechanical Properties of Magnesium Composite Alloys Dispersed with Carbon Nanotube via Powder Metallurgy Process, K. Kondoh,H. Fukuda,H. Imai,B. Fugetsu, TMS2008, New Orleans, USA, 2008/03
  • RCPプロセスを施したAZ31マグネシウム合金の疲労特性, 佐藤 和也,荏草 和哉,杉澤 元次郎,宮下 幸雄,近藤 勝義,武藤 睦治, 第37回学生員卒業研究発表講演会, 福井, 2008/03
  • 放電プラズマ焼結法で作製された粉末形状の異なるTi-6Al-4V焼結体の組織および機械的性質, 齊藤 由佳,今井 久志,近藤 勝義,村田 清,村上 雅人, （社）軽金属学会第113回秋期大会, 千葉, 2007/11
  • 籾殻からの高純度非晶質シリカの生成プロセスに関する研究, 梅田 純子,近藤 勝義,道浦 義貞, 日本廃棄物学会講演会, つくば, 2007/11
  • Microstructures and Texture of the Extruded AZ31 Magnesium Alloy via Rollcompaction Process, T. Oguri,K. Kondoh,K. Kawabata, 2nd Int. Symp. Smart Process. Tech. (SPT'07), Osaka, Japan, 2007/11
  • Characteristics of Hot Extruded Aluminum Alloy in Using Rapidly Solidified Powder via SWAP, M. Kawakami,K. Kondoh,H. Imai,I. Otsuka,H. Izaki, 2nd Int. Symp. Smart Process. Tech. (SPT'07), Osaka, Japan, 2007/11
  • SWAP法により作製した急冷凝固粉末を用いたA7075アルミニウム押出材の特性, 川上 雅史,近藤 勝義,今井 久志,大塚 勇,伊崎 博, 第15回機械材料・材料加工技術講演会, 長岡, 2007/11
  • RCP処理を施したマグネシウム合金押出材の組織と集合組織, 小栗 孝通,近藤 勝義,川端 健詞, 第15回機械材料・材料加工技術講演会, 長岡, 2007/11
  • Zr-Cu, Zr-Ni and Zr-Al Binary Films Deposited by Planar Magnetron Sputtering, T. Serikawa,K. Kawabata,K. Kondoh,H. Kimura,A. Inoue, The Sixth Pacific Rim International Conference on Advanced Materials and Processing(PRICM 6), Jeju, Korea, 2007/11
  • 強塑性加工によるマグネシウム合金切削屑の高度再生プロセスに関する研究, 近藤 勝義,川端 健詞,金子 貫太郎,藤井 徳男, 日本廃棄物学会講演会, つくば, 2007/11
  • Environmentally benign process to prepare high-purity SiO2 from agricultural wastes, K. Kondoh,J. Umeda,and Y. Michiura, 2nd Int. Symp. Smart Process. Tech. (SPT'07), Osaka, Japan, 2007/11
  • Solid-state recycle of in-house machined Mg chips by severe plastic working, K. Kondoh,N. Fujii,K. Kaneko,M. Ueda, 2nd Int. Symp. Smart Process. Tech. (SPT'07), Osaka, Japan, 2007/11
  • CNTを付着させたマグネシウム合金粉末とその圧粉体の組織観察, 福田 博之,近藤 勝義,今井 久志,古月 文志, 第58回塑性加工連合講演会, 札幌, 2007/10
  • SWAP法により作製した急冷凝固粉末を用いたアルミニウム押出材の特性, 川上 雅史,近藤 勝義,今井 久志,大塚 勇,伊崎 博, 第58回塑性加工連合講演会, 札幌, 2007/10
  • RCP処理を施したマグネシウム合金押出材の組織と集合組織, 小栗 孝通,近藤 勝義,川端 健詞, 第58回塑性加工連合講演会, 札幌, 2007/10
  • Grain-refined Magnesium Alloys via Severe Plastic Deformation, K. Kondoh,K. Kawabata,H. Oginuma, 1st Thailand Metallurgy Conference “Metal R&D for 21st Century”, Thailand, 2007/10
  • 粉体繰り返し圧延(RCPプロセス)を施したMg-Gd-Y-Zn-Zr合金の組織と機械的特性, 川端 健詞,荻沼 秀樹,近藤 勝義,鎌土 重晴, 日本機械学会2007年度年次大会, 大阪, 2007/09
  • RCP加工を施したAZ31マグネシウム合金切削チップ押出固化材における組織と曲げ特性, 亀谷 博仁,閤師 昭彦,藤井 徳雄,金子 貫太郎,川端 健詞,近藤 勝義, 日本機械学会2007年度年次大会, 大阪, 2007/09
  • スパッタ法による2元系Zr-Cu アモルファス膜の製作と構造, 藤田 淳司,川端 健詞,芹川 正,近藤 勝義,木村 久道,井上 明久, 第68回応用物理学会学術講演会, 札幌, 2007/09
  • バルクメカニカルアロイング法によるマグネシウム基複合材料の開発（１）, 藤田 行俊,本江 克次,榎並 啓太郎,横溝 正二郎,須賀 紳行,五十嵐 貴教,近藤 勝義, （社）粉体粉末冶金協会第99回講演大会, 東京, 2007/06
  • RCP加工を施したAZ31マグネシウム合金切削チップ押出固化材における組織と曲げ特性, 亀谷 博仁,閣師 昭彦,藤井 徳雄,金子 貫太郎,川端 健詞,近藤 勝義, （社）粉体粉末冶金協会第99回講演大会, 東京, 2007/06
  • RFスパッタ法により作製されたZr-Al-Ni-Cu薄膜の構造と耐食性, 川端 健詞,芹川 正,近藤 勝義,木村 久道,井上 明久, （社）粉体粉末冶金協会第99回講演大会, 東京, 2007/06
  • Corrosion resistance of Zr-Al-Ni-Cu films deposited by radio-frequency sputtering on AZ31 Mg alloy and SiO2 substrates, K. Kawabata,T. Serikawa,K. Kondoh,H. Kimura,A. Inoue, Joint Conference of 1st International Conference on Science and Technology for Advanced Ceramics (STAC) and 2nd International Conference on Joining Technology for New Metallic Glasses and Inorganic Materials (JTMC), Kanagawa, Japan, 2007/05
  • Mg被覆炭素繊維強化マグネシウム基複合材料の特性, 近藤 勝義,川端 健詞,荻沼 秀樹, （社）軽金属学会第112回春期大会, 富山, 2007/05
  • 籾殻由来の高純度アモルファスシリカの生成過程における有機物分解挙動解析, 近藤 勝義,荻沼 秀樹,舟金 仁志,木村 淳, （社）日本金属学会 2007年春期(第140回)大会, 千葉, 2007/03
  • Mg成膜処理炭素繊維を用いたマグネシウム基複合材料の組織および力学特性, 近藤 勝義,川端 健詞,荻沼 秀樹, （社）日本金属学会 2007年春期(第140回)大会, 千葉, 2007/03
  • Na2So4水溶液中における各種手法により作製されたMg-Al系合金の腐食特性, 砂田 聡,川村 貴人,近藤 勝義,能登谷 久公,真島 一彦, （社）日本金属学会 2007年春期(第140回)大会, 千葉, 2007/03
  • RFスパッタ法によるZr-Al-Ni-Cu二元系アモルファス薄膜の作製, 川端 健詞,芹川 正,近藤 勝義,木村 久道,井上 明久, （社）日本金属学会 2007年春期(第140回)大会, 千葉, 2007/03
  • Mechanical Properties and Texture of Hot Extruded Magnesium Alloys via RCP Process in Using Coarse Raw Powder, K. Kondoh,K. Kawabata,H. Oginuma, TMS 2007 136th Annual Meeting & Exhibition, Orlando, FL, 2007/02
  • RCPプロセスを含む各種手法により作製されたMg合金の腐食特性, 砂田 聡,川村 貴人,近藤 勝義,真島 一彦, 粉体粉末冶金協会第98回講演大会, 大阪大学, 2006/12
  • Mg2Si分散Mg-Zn-Y系急速凝固粉末固化成形材の開発, 近藤 勝義,笹嶋 幹雄,河村 能人,大河内 均,都筑 隆之, 粉体粉末冶金協会第98回講演大会, 大阪大学, 2006/12
  • Depositions and Microstructures of Zr-Al-Ni-Cu Thin Film by Sputtering Method, K. Kawabata,T. Serikawa,K. Kondoh,H. Kimura,A. Inoue, The 5th International Conference on Bulk Metallic Glasses (BMG-V）, Awaji, Japan, 2006/11
  • RCPプロセスによる結晶粒マグネシウム合金押出材の特性, 荻沼 秀樹,近藤 勝義,川端 健詞, 第57回塑性加工連合講演会, 高岡商工会議所, 2006/10
  • Roll Compaction(RCP)プロセスによるマグネシウム合金粉体の組織制御と押出材の特性, 近藤 勝義,荻沼 秀樹,川端 健詞, 第57回塑性加工連合講演会, 高岡商工会議所, 2006/10
  • 微細結晶粒を有するマグネシウム合金へのMg2Si粒子分散特性, 荻沼 秀樹,川端 健詞,近藤 勝義, 日本機械学会2006年度年次大会概要集,, 2006/09
  • 微細結晶粒を有する押出素材特性に及ぼす出発原料の影響, 荻沼 秀樹,川端 健詞,近藤 勝義, 日本金属学会 2006年秋季大会, 新潟, 2006/09
  • RCP-AZ31合金押出材の組織と集合組織に対する押出比の影響, 小栗 孝通,川端 健詞,荻沼 秀樹,近藤 勝義, 日本金属学会 2006年秋季大会, 新潟, 2006/09
  • RCPプロセスによるMg-2Y-1Zn合金の粉体および押出材の組織と機械的特性, 松本 佳,川端 健詞,荻沼 秀樹,近藤 勝義,鎌土 重晴, 日本金属学会 2006年秋季大会, 新潟, 2006/09
  • RFスパッタ法によるZr-Al-Ni-Cuターゲットを用いたアモルファス薄膜の作製, 川端 健詞,芹川 正,近藤 勝義,木村 久道,井上 明久, 日本金属学会 2006年秋季大会, 新潟, 2006/09
  • Structures of Metallic Glass Films by Sputtering Method with Zr55Al10Ni5Cu30 targets, K. Kawabata,T. Serikawa,K. Kondoh,H. Kimura,A. Inoue, ICCCI 2006, Kurashiki, Japan, 2006/09
  • 有機物分解処理による籾殻由来の高純度アモルファスSiO2の製造プロセス, 舟金 仁志,近藤 勝義,荻沼 秀樹, 日本金属学会 2006年秋季大会, 新潟, 2006/09
  • RCPプロセスによるAZ31マグネシウム展伸材の機械的特性, 近藤 勝義,荻沼 秀樹,川端 健詞, 社）日本機械学会2006年度年次大会, 熊本大学, 2006/09
  • 粉体加工プロセスによるマグネシウム展伸材の集合組織制御, 近藤 勝義,荻沼 秀樹,川端 健詞, 社）軽金属学会第110回春期大会, 北九州国際会議場, 2006/05
  • Texture control of wrought magnesium alloys by powder metallurgy process, KONDOH Katsuyoshi,OGINUMA Hideki,KAWABATA Kenshi, Vol. 110, p. 103-104, 2006/04/13
  • スパッタMg-Si膜形成におよぼす基板電圧印加効果, 川端 健詞,芹川 正,山口 貴嗣,荻沼 秀樹,近藤 勝義,木村 久道,井上 明久, 2006年春季第53回応用物理学関係連合講演会, 東京, 2006/03
  • 複合ターゲットを用いたスパッタ法によるMg-Si膜の堆積機構, 芹川 正,川端 健詞,山口 貴嗣,荻沼 秀樹,近藤 勝義,木村 久道,井上 明久, 2006年春季第53回応用物理学関係連合講演会, 東京, 2006/03
  • RCPプロセスにより作製されたAZ31合金の組織と機械的特性, 川端 健詞,荻沼 秀樹,近藤 勝義,金子 貫太郎,秋田 亨, 日本金属学会 2006年度春季大会, 東京, 2006/03
  • RCPプロセスによるマグネシウム合金展伸材の組織制御, 近藤 勝義,荻沼 秀樹,川端 健詞,金子 貫太郎,秋田 亨, 社）日本金属学会2006年春期大会, 早稲田大学, 2006/03
  • RCPプロセスによるお微細結晶粒を有する粗大マグネシウム合金粉体の特性, 近藤 勝義,荻沼 秀樹,川端 健詞,住田 雅樹,金子 貫太郎,秋田 亨, 軽金属学会第109回秋季大会, 習志野, 2005/11
  • RCP加工を施したAZ91D熱処理粉体およびその温間押出材の特性, 近藤 勝義,荻沼 秀樹,川端 健詞,住田 雅樹,金子 貫太郎,秋田 亨, 軽金属学会第109回秋季大会, 習志野, 2005/11
  • RCPプロセスにより形成されるマグネシウム合金の微細組織, 川端 健詞,荻沼 秀樹,住田 雅樹,近藤 勝義,金子 貫太郎,秋田 亨, 軽金属学会第109回秋季大会, 習志野, 2005/11
  • RCPプロセスにより作製されたマグネシウム合金の機械的特性, 川端 健詞,荻沼 秀樹,住田 雅樹,近藤 勝義,金子 貫太郎,秋田 亨, 軽金属学会第109回秋季大会, 習志野, 2005/11
  • 熱処理粉体を用いたRCP加工処理マグネシウム合金押出材の特性, 近藤 勝義,荻沼 秀樹,川端 健詞,住田 雅樹,金子 貫太郎,福井 英明,塩崎 修司,秋田 亨,西郡 榮,奥村 正,護法 良憲, 粉体粉末冶金協会 平成17年度秋季大会, 浜松, 2005/11
  • RCPプロセスにより形成されるマグネシウム合金粉体および押出材の微細組織, 川端 健詞,荻沼 秀樹,住田 雅樹,近藤 勝義,金子 貫太郎,福井 英明,塩崎 修司,秋田 亨,西郡 榮,奥村 正,護法 良憲, 粉体粉末冶金協会 平成17年度秋季大会, 浜松, 2005/11
  • 2244 Mechanical Properties of Grain-refined Magnesium Alloys, Kondoh Katsuyoshi,Oginuma Hideki,Sumida Masaki,Shiozaki Shuji,Goho Yoshinori, The Japan Society of Mechanical Engineers, Vol. 2005, No. 1, p. 651-652, 2005/09/18
  • Mechanical properties of Magnesium composite with Mg_2Si dispersoids, OGINUMA Hideki,KONDOH Katsuyoshi,SUMIDA Masaki,YUASA Eiji, Materials and processing conference, The Japan Society of Mechanical Engineers, Vol. 2004, No. 12, p. 73-74, 2004/11/05
  • Surface Modification of Magnesium Alloys by Mg_2Si coating, KONDOH Katsuyoshi,YAMAGUCHI Takashi, Vol. 107, p. 91-92, 2004/11/01
  • Hot Extrusion of Magnesium Composite Dispersed Mg_2Si/MgO Using Powder and its Mechanical Properties, IIBUCHI Masato,DU Wenbo,KONDOH Katsuyoshi,YUASA Eiji, The Japan Society of Mechanical Engineers, Vol. 2004, No. 1, p. 567-568, 2004/09/04
  • Synthesis of Mg Composite Material with Dispersoids via Spark Plasma Sintering, ISHIHARA Masaya,TSUZUKI Ritsuko,KONDOH Katsuyshi,YUASA Eiji, The Japan Society of Mechanical Engineers, Vol. 2004, No. 1, p. 569-570, 2004/09/04
  • High strengthen magnesium alloys with high toughness via grain-refining process, KONDOH Katsuyoshi,TSUZUKI Ritsuko,KAMADO Shigeharu, Vol. 106, p. 251-252, 2004/05/18
  • Tribological Property of Mg_2Si/MgO/Mg Composites with Graphite Particles under Dry Conditions, MURAMATSU Hiroshi,KONDOH Katsuyoshi,YUASA Eiji, Materials and processing conference, The Japan Society of Mechanical Engineers, Vol. 2003, No. 11, p. 127-128, 2003/10/17
  • Reaction and Sintering of Mg_2Si from Elemental Mg-Si Powder Mixture via SPS Process, OGINUMA Hideki,KONDOH Katsuyoshi,YAMAGUCHI Takatsugu,YUASA Eiji, Materials and processing conference, The Japan Society of Mechanical Engineers, Vol. 2003, No. 11, p. 129-130, 2003/10/17
  • Properties of Hot Extruded Magnesium Composite with Mg_2Si Dispersoids via SPS Process, TSUZUKI Ritsuko,ISHIHARA Masaya,KONDOH Katsuyoshi,YUASA Eiji, Materials and processing conference, The Japan Society of Mechanical Engineers, Vol. 2003, No. 11, p. 131-132, 2003/10/17
  • Surface improvement of magnesium alloy using solid-state reaction method, OGINUMA Hideki,Yuasa Eiji,KONDOH Katsuyoshi, The Japan Society of Mechanical Engineers, Vol. 2003, No. 1, p. 401-402, 2003/08/05
  • Material Design for Powder Metallurgy Magnesium Alloy with Low Friction Coefficient, KONDOH Katsuyoshi,AIZAWA Tatsuhiko,OKI Yoshinari, The Japan Society of Mechanical Engineers, Vol. 2003, No. 1, p. 421-422, 2003/08/05
  • Direct Current Sintering of Mg-Al Alloy Powder Produced by Mechanical Alloying method, OHGUCHI Ayako,OGINUMA Hideki,YUASA Eiji,KONDOH Katsuyoshi, Vol. 104, p. 263-264, 2003/04/20
  • アルミニウム粉末合金とその応用事例, 近藤 勝義, 粉体および粉末冶金, 社団法人 粉体粉末冶金協会, Vol. 49, No. 11, 2002/11/15
  • Properties of Hot Extruded Magnesium Composite with Mg_2Si Dispersions via Solid-state Synthesis, ISHIHARA Masaya,TSUZUKI Ritsuko,KONDOH Katsuyoshi,YUASA Eiji, The Japan Society of Mechanical Engineers, Vol. 2002, No. 2, p. 515-516, 2002/09/20
  • Properties of hot extruded magnesium composite with Mg_2Si dispersions via solid-state synthesis, TSUZUKI Ritsuko,ISHIHARA Masaya,KONDOH Katsuyoshi,YUASA Eiji, The Japan Society of Mechanical Engineers, Vol. 2002, No. 2, p. 517-518, 2002/09/20
  • Effect of SiO_2 Content on Properties of Mg Alloys with Mg_2Si/MgO Dispersions, Du Wenbo,Iibuchi M,Kondoh K,Yuasa E, The Japan Society of Mechanical Engineers, Vol. 2002, No. 2, p. 519-520, 2002/09/20
  • Properties of Magnesium Alloy with Mg_2Si/MgO dispersions via Solid-state Synthesis, IIBUCHI Masato,DU Wenbo,KONDOH Katsuyoshi,YUASA Eiji, The Japan Society of Mechanical Engineers, Vol. 2002, No. 2, p. 521-522, 2002/09/20
  • 6.2.材料加工(6.機械材料・材料加工)(<特集>機械工学年鑑), 湯浅 栄二,吉田 一也,尾崎 純一,真鍋 健一,時末 光,近藤 勝義,大竹 尚登, 日本機械学會誌, 一般社団法人日本機械学会, Vol. 105, No. 1005, p. 511-513, 2002/08/05
  • Characteristics of P/M Magnesium Based Composite Material, KONDOH Katsuyoshi,AIZAWA Tatsuhiko,LUANGVARANUNT Tachai,YUASA Eiji, Vol. 102, p. 291-292, 2002/04/17
  • 605 Reaction behavior in formation of Mg_2Sn intermetalic from powder, OGINUMA Hideki,KONDOH Katsuyoshi,YUASA Eiji,AIZAWA Tatsuhiko, Materials and processing conference, The Japan Society of Mechanical Engineers, Vol. 2001, No. 9, p. 235-236, 2001/11/02
  • 622 Characteristics of Mg Based Composite Material via Solid-State Synthesis, KONDOH Katsuyoshi,MURAMATSU Hiroshi,YUASA Eiji,AIZAWA Tatsuhiko, Materials and processing conference, The Japan Society of Mechanical Engineers, Vol. 2001, No. 9, p. 439-440, 2001/11/02
  • Solid Sintering of Aluminum Powder by Most-Surface Analysis, KONDOH Katsuyoshi, Pre-Prints of the National Meeting of JWS, Japan Welding Society, No. 69, p. F-14-"F-18", 2001/09/10
  • K-1018 Warm Bulk Mechanical Alloying for Refinement and Homogenization of Light-Element Alloys, Aizawa Tatsuhiko,Luangvaranunt Tachai,Kondoh Katsuyisho, The Japan Society of Mechanical Engineers, Vol. 0, No. 1, p. 525-526, 2001/08/22
  • 208 Solid-State Synthensis of n-type Thermo-Electric Powder Metallurgy Mg_2Si Material, OGINUMA Hideki,KONDOH Katsuyoshi,AIZAWA Tatsuhiko,YUASA Eiji, Materials and processing conference, The Japan Society of Mechanical Engineers, Vol. 2000, No. 8, p. 63-64, 2000/11/24
  • マイクロ・セルラ材料製造プロセスの提案, 金橋 秀豪,相澤 龍彦,近藤 勝義, 鋳物 : 講演大会講演概要集, Vol. 137, 2000/09/25
  • Optimum heat input control in arc welding on aluminum pipe, KONDOH Katsuyoshi,OHJI Takayoshi, Vol. 93, p. 291-292, 1997/10/20
  • Optimum control of thin plate TIG are welding (Report 2), Nishiguchi Kimiyuki,Ohji Takayoshi,Kondo Katsuyoshi,Shimada Wataru,Hiramoto Seigo,Moriyasu Masaharu, Pre-Prints of the National Meeting of JWS, Japan Welding Society, No. 43, p. 140-141, 1988/08/29
  • 234 計算モデルによるアーク溶接の最適制御に関する研究, 西口 公之,黄地 尚義,近藤 勝義,大峯 恩,平本 誠剛,森安 雅治, 溶接学会全国大会講演概要, 社団法人溶接学会, No. 41, p. 190-191, 1987/09/12

Publications

  • Novel Structured Metallic and Inorganic Materials, Katsuyoshi Kondoh,Biao Chen,Junko Umeda, Springer, ISBN:9789811376108, 2019/07
  • 粉末成形 - 粉末加工による機能と形状のつくり込み -, 近藤 勝義, コロナ社, ISBN:9784339043808, 2018/12
  • マグネシウム合金の先端的基盤技術とその応用展開 (新材料・新素材シリーズ), 近藤 勝義, シーエムシー出版, ISBN:9784781312989, 2018/11
  • Titanium in Medical and Dental Application, K. Kondoh,J. Umeda,R. Soba,Y. Tanabe, Woodhead publishing in materials, ISBN:9780128124567, 2018/05
  • Titanium Powder Metallurgy: Science, Technology and Applications, Katsuyoshi Kondoh, Butterworth-Heinemann, ISBN:9780128000540, 2015/03
  • カーボンナノチューブ・グラフェン分散技術の工業化と機能展開, 近藤 勝義,今井 久志,梅田 純子, S&T出版, ISBN:9784907002343, 2014/02
  • Справочник по технологии наночастиц ( Nanoparticle Technology Handbook ), Katsuyoshi Kondoh, Научный мир ( Scientific World Publishing House ), ISBN:9785915222310, 2013/05
  • Advanced Magnesium Technologies and their Applications, Katsuyoshi Kondoh, CMC Publishing Co., Ltd., ISBN:9784781305530, 2012/09
  • Powder Metallurgy, Katsuyoshi Kondoh, InTech, ISBN:9789535100713, 2012/03
  • Ballistic and Corrosion Analysis of New Military-Grade Magnesium Alloys AMX602 and ZAXE1711 for Armor Applications, Tyrone L.Jones,Joseph P. Labukas,Brian E. Placzankis,Katsuyoshi Kondoh, Army Research Laboratory, 2012/02
  • 共創・協奏 -産学連携成功のキーワード-, 近藤 勝義, （株）アドスリー, ISBN:9784904419243, 2011/07
  • 粉体粉末冶金便覧, 近藤 勝義, （株）内田老鶴圃, ISBN:9784753650965, 2010/11
  • Nanoparticle Technology Handbook, Katsuyoshi Kondoh, ELSEVIER, ISBN:9780444531223, 2007/11
  • Nanoparticle Technology Handbook, Katsuyoshi Kondoh, Nikkan Kougyo Shinbun, ISBN:9784526056642, 2006/04

Industrial Property Rights

  • 窒素固溶チタン粉末材料、チタン素材及び窒素固溶チタン粉末材料の製造方法, 近藤 勝義,他, 3097998, 14879502.4, 出願日:2016/07, 登録日:2024/02
  • 窒素固溶チタン粉末材料、チタン素材及び窒素固溶チタン粉末材料の製造方法, 近藤 勝義,他, 456433, 2.01627E+11, 出願日:2016/07, 登録日:2023/10
  • 非晶質シリカおよびその製造方法, 近藤 勝義,他, 88963, 701005358, 出願日:2007/10, 登録日:2022/07
  • 有機系廃棄物の燃焼灰の無害化方法および有機系廃棄物の燃焼設備, 近藤 勝義,他, 特許32474, 1-2016-04993, 出願日:2016/12, 登録日:2022/05/31
  • チタン粉末材料、チタン素材及び酸素固溶チタン粉末材料の製造方法, 近藤 勝義,他, 特許3093085, 14877708.9, 出願日:2016/07/08, 登録日:2022/04/17
  • Ti-Fe系焼結合金素材およびその製造方法, 近藤 勝義, 11,084,093, 16/396,245, 出願日:2019/04, 登録日:2021/08
  • Ti-Fe系焼結合金素材およびその製造方法, 近藤 勝義, 特許第6885900号, 2018-111577, 出願日:2018/06, 登録日:2021/05/17
  • 窒素固溶チタン粉末材料、チタン素材及び窒素固溶チタン粉末材料の製造方法, 近藤 勝義,他, BR112016016577-2, BR112016016577-2, 出願日:2016/07, 登録日:2021/05
  • 酸素固溶チタン材料焼結体およびその製造方法, 近藤 勝義, 特許第6861164号, 特願2017-532419, 出願日:2018/04, 登録日:2021/03
  • 窒素固溶チタン材料焼結体およびその製造方法, 近藤 勝義, 10,807,164, 15/773,031, 出願日:2018/05, 登録日:2020/10/20
  • 放射性廃棄物処分場用セメント系材料, 近藤 勝義,他, 10,807,910, 15/747,788, 出願日:2018/01, 登録日:2020/10
  • 有機系廃棄物由来の球状シリカ粒子およびその製造方法, 近藤 勝義,他, 特許25528, 1-2015-02352, 出願日:2015/06, 登録日:2020/08/18
  • 窒素固溶チタン焼結体の製造方法, 近藤 勝義, 特許第6669471号, 特願2015-215847, 出願日:2015/11, 登録日:2020/03
  • 放射性廃棄物処分場用セメント系材料, 近藤 勝義,他, ZL201680039754.5, ・201680039754.5, 出願日:2018/01, 登録日:2019/08
  • 焼結刃物素材およびその製造方法, 近藤 勝義,他, 特許第6564763号, 特願2016-253585, 出願日:2016/12, 登録日:2019/08
  • 籾殻燃焼灰の無害化方法および籾殻の燃焼設備, 近藤 勝義,他, 特許第6552502号, 特願2016-538381, 出願日:2016/11, 登録日:2019/07
  • 窒素固溶チタン粉末材料、チタン素材及び窒素固溶チタン粉末材料の製造方法, 近藤 勝義,他, ZL201480073907.9, ・201480073907.9, 出願日:2016/07, 登録日:2019/06
  • チタン粉末材料、チタン素材及び酸素固溶チタン粉末材料の製造方法, 近藤 勝義,他, 10307824, 15/110,551, 出願日:2016/07, 登録日:2019/06
  • 放射性廃棄物処分場用セメント系材料, 近藤 勝義,他, 10-1958136, 10-2017-7034942, 出願日:2017/12, 登録日:2019/03
  • 放射性廃棄物処分場用セメント系材料, 近藤 勝義,他, 特許第6500108号, 特願2017-532419, 出願日:2017/10, 登録日:2019/03
  • 窒素固溶チタン粉末材料、チタン素材及び窒素固溶チタン粉末材料の製造方法, 近藤 勝義,他, 10213837, 15/113,637, 出願日:2016/07, 登録日:2019/02
  • 微細シリカ粉末の製造方法, 近藤 勝義,梅田 純子,他, 6420695, 特願2015-042072, 出願日:2015/03, 登録日:2018/10
  • 有機系廃棄物由来の球状シリカ粒子およびその製造方法, 近藤 勝義,他, 62730, 1501003692, 出願日:2015/06, 登録日:2018/05
  • 被膜付締結部品およびその製造方法, 近藤 勝義,他, 6334854, 特願2013-128117, 出願日:2013/06, 登録日:2018/05
  • チタン粉末材料、チタン素材及び酸素固溶チタン粉末材料の製造方法, 近藤 勝義,他, ZL201480072562.5, ・201480072562.5, 出願日:2016/07, 登録日:2017/12
  • 窒素固溶チタン粉末材料、チタン素材及び窒素固溶チタン粉末材料の製造方法, 近藤 勝義, 6261618, 特願2015-558769, 出願日:2016/04, 登録日:2017/12
  • 高強度加工素材およびその製造方法ならびにその製造装置, 近藤 勝義,他, 2080571, 7829083, 出願日:2009/03, 登録日:2017/09
  • 酸素固溶チタン素材、酸素固溶チタン粉末材料及び酸素固溶チタン粉末材料の製造方法, 近藤 勝義,他, 特許第6054553号, 特願2015-556775, 出願日:2015/09, 登録日:2016/12
  • 有機系廃棄物由来の球状シリカ粒子およびその製造方法, 近藤 勝義,他, 10-1588548, 10-2014-7035266, 出願日:2014/12, 登録日:2016/01
  • チタン材料およびその製造方法, 近藤 勝義,他, 特許第5760278号, 特願2011-113212, 出願日:2011/05, 登録日:2015/06
  • アモルファス酸化ケイ素粉末およびその製造方法, 近藤 勝義,他, ZL200680031532.5, ・200680031532.5, 出願日:2008/02, 登録日:2015/04
  • チタン基複合材料の製造方法および該方法によって製造されたチタン基複合材料, 近藤 勝義,他, 特許第5709239号, 特願2010-061995, 出願日:2010/03, 登録日:2015/03
  • 有機系廃棄物由来の球状シリカ粒子およびその製造方法, 近藤 勝義,他, 特許第5703428号, 特願2014-555645, 出願日:2014/11, 登録日:2015/02
  • 摺動部材およびその製造方法, 近藤 勝義,梅田 純子,他, 特許第5669042号, 特願2011-027369, 出願日:2011/02, 登録日:2014/12
  • 高強度銅合金, 近藤 勝義,他, ZL201080013404.4, ・201080013404.4, 出願日:2011/09, 登録日:2014/09
  • 複合金属材の製造方法, 近藤 勝義,他, 特許第5407867号, 特願2009-538129, 出願日:2010/03, 登録日:2013/11
  • 高強度銅合金, 近藤 勝義,他, 特許第5326114号, 特願2011-510307, 出願日:2010/04, 登録日:2013/08
  • 非晶質シリカおよびその製造方法, 近藤 勝義,他, 特許第5213120号, 特願2008-542038, 出願日:2009/03, 登録日:2013/03
  • アモルファス酸化ケイ素粉末およびその製造方法, 近藤 勝義,他, 特許第5100385号, 特願2007-533248, 出願日:2008/02, 登録日:2012/10
  • 複合金属材およびその製造方法, 近藤 勝義,他, 8273290, 12/739,175, 出願日:2010/04, 登録日:2012/09
  • 黄銅合金粉末、黄銅合金押出材およびその製造方法, 近藤 勝義,他, ZL200980116310.7, ・200980116310.7, 出願日:2010/11, 登録日:2012/08
  • 非晶質シリカおよびその製造方法, 近藤 勝義,他, ZL200780039485.3, ・200780039485.3, 出願日:2009/04, 登録日:2012/08
  • 高強度加工素材およびその製造方法ならびにその製造装置, 近藤 勝義,他, 8250897, 12/311,558, 出願日:2009/04, 登録日:2012/08
  • 重金属汚染土壌の浄化方法, 近藤 勝義,梅田 純子,他, 特許第5069056号, 特願2007-204612, 出願日:2007/08, 登録日:2012/08
  • 非晶質シリカおよびその製造方法, 近藤 勝義,他, 252859, 622/MUMNP/2009, 出願日:2009/03, 登録日:2012/06
  • アモルファス酸化ケイ素粉末及びその製造方法, 近藤 勝義,他, 252854, 318/MUMNP/2008, 出願日:2008/02, 登録日:2012/06
  • アモルファス酸化ケイ素粉末及びその製造方法, 近藤 勝義,他, 8178067, 11/991,070, 出願日:2008/02, 登録日:2012/05
  • 押出用ビレットの製造方法およびマグネシウム合金素材の製造方法, 近藤 勝義,他, 10-1074972, 10-2009-7024703, 出願日:2009/11, 登録日:2011/10
  • 非晶質シリカおよびその製造方法, 近藤 勝義,他, 7998448, 12/312,075, 出願日:2009/04, 登録日:2011/08
  • 合金粉体原料およびその製造方法, 近藤 勝義,他, 7909248, 10/592,877, 出願日:2007/07, 登録日:2011/03
  • マグネシウム合金粉体原料、高耐力マグネシウム合金、マグネシウム合金粉体原料の製造方法および高耐力マグネシウム合金の製造方法, 近藤 勝義,他, ZL200680020361.6, ・20068002361.6, 出願日:2007/12, 登録日:2010/12
  • 高強靭性マグネシウム基合金およびそれを用いた駆動系部品並びに高強靭性マグネシウム基合金素材の製造方法, 近藤 勝義, ZL200580018442.8, ・200580018442.8, 出願日:2006/12, 登録日:2010/12
  • 銅合金押出材およびその製造方法, 近藤 勝義,他, 10-0982611, 10-2007-7029613, 出願日:2007/12, 登録日:2010/09
  • Ti粒子分散マグネシウム基複合材料の製造方法, 近藤 勝義,他, 特許第4451913号, 特願2008-226261, 出願日:2008/09, 登録日:2010/02
  • 被膜形成材料および金属材料の製造方法, 近藤 勝義,他, 特許第4452779号, 特願2004-528861, 出願日:2003/08, 登録日:2010/02
  • 高強靭性マグネシウム基合金およびそれを用いた駆動系部品並びに高強靭性マグネシウム基合金素材の製造方法, 近藤 勝義,他, 1770180, EPC出願,特願5741606.7, 出願日:2006/12, 登録日:2009/12
  • マグネシウム基複合材料, 近藤 勝義,他, ZL02818531.5, ・2818531.5, 出願日:2004/03, 登録日:2009/12
  • Ti粒子分散マグネシウム基複合材料の製造方法, 近藤 勝義,他, 特許第4397425号, 特願2008-226260, 出願日:2008/09, 登録日:2009/10
  • 合金粉末原料及其製造方法, 近藤 勝義,他, ZL200480042439.5, ・200480042439, 出願日:2004/05, 登録日:2009/10
  • マグネシウム合金素材の製造方法, 近藤 勝義,他, 特許第4372827号, 特願2008-162103, 出願日:2008/06, 登録日:2009/09
  • 高強度加工素材およびその製造方法ならびにその製造装置, 近藤 勝義,他, 特許第4377901号, 特願2006-273686, 出願日:2006/10, 登録日:2009/09
  • マグネシウム合金素材の製造方法, 近藤 勝義,他, 特許第4215126号, 特願2003-568111, 出願日:2003/02, 登録日:2008/11
  • 押出用ビレットの製造方法およびマグネシウム合金素材の製造方法, 近藤 勝義,他, 特許第4185549号, 特願2007-198556, 出願日:2007/07, 登録日:2008/09
  • マグネシウム合金顆粒状粉体原料の製造方法, 近藤 勝義,他6名, 特許第3884741号, 特願2004-072411, 出願日:2004/03, 登録日:2006/11
  • α＋β型チタン合金部材及びその製造方法, 近藤 勝義,他, 特願2023-091541, 出願日:2023/06
  • α＋β型チタン合金部材及びその製造方法, 近藤 勝義,他, 特願2023-091540, 出願日:2023/06
  • ベローズ型伸縮管継手, 近藤 勝義,他, 特願2022-129953, 出願日:2022/08
  • 不同沈下対策用伸縮可撓継手ユニット, 近藤 勝義,他, 特願2022-109394, 出願日:2022/07
  • ベローズ型伸縮管継手の変化量検出機構, 近藤 勝義,他, 特願2022-099717, 出願日:2022/06
  • ベローズ型伸縮管継手, 近藤 勝義,他, 特願2022-071266, 出願日:2022/04
  • 酸素固溶チタン材料焼結体, 近藤 勝義, 17/532,373, 出願日:2021/11
  • 窒素固溶チタン焼結体, 近藤 勝義, 17/024,508, 出願日:2020/09
  • 酸素固溶チタン材料焼結体およびその製造方法, 近藤 勝義, 15/773,018, 出願日:2018/05
  • 酸素固溶チタン焼結体およびその製造方法, 近藤 勝義, PCT16026JP, 出願日:2018/04
  • 有機系廃棄物の燃焼灰の無害化方法および有機系廃棄物の燃焼設備, 近藤 勝義,他, 特願1701000378, 出願日:2017/01
  • 窒素固溶チタン粉末材料、チタン素材及び窒素固溶チタン粉末材料の製造方法, 近藤 勝義,他, 2.01627E+11, 出願日:2016/07
  • 窒素固溶チタン粉末材料、チタン素材及び窒素固溶チタン粉末材料の製造方法, 近藤 勝義,他, MX/a/2016/009440, 出願日:2016/07
  • 窒素固溶チタン粉末材料、チタン素材及び窒素固溶チタン粉末材料の製造方法, 近藤 勝義,他, 14879502.4, 出願日:2016/07
  • 放射性廃棄物処分場用セメント系材料, 近藤 勝義,他, PCT/JP2016/068213, 出願日:2016/06
  • 酸素固溶チタン焼結体およびその製造方法, 近藤 勝義, 特願2015-215846, 出願日:2015/11
  • チタン粉末材料、チタン素材及び酸素固溶チタン粉末材料の製造方法, 近藤 勝義,他, 未着, 出願日:2015/09
  • 有機系廃棄物の燃焼灰の無害化方法および有機系廃棄物の燃焼設備, 近藤 勝義,他, PCT/JP2015/071460, 出願日:2015/07
  • 放射性廃棄物処分場用セメント系材料, 近藤 勝義,他, 特願2015-151830, 出願日:2015/07
  • 窒素固溶チタン粉末材料、チタン素材及び窒素固溶チタン粉末材料の製造方法, 近藤 勝義, PCT/JP2014/084530, 出願日:2014/12
  • チタン粉末材料、チタン素材及び酸素固溶チタン粉末材料の製造方法, 近藤 勝義, PCT/JP2014/084529, 出願日:2014/12
  • 有機系廃棄物の燃焼灰の無害化方法および有機系廃棄物の燃焼設備, 近藤 勝義,他, 特願2014-155924, 出願日:2014/07
  • 有機系廃棄物由来の球状シリカ粒子およびその製造方法, 近藤 勝義,他, PCT/JP2014/068719, 出願日:2014/07
  • 窒素固溶チタン粉末材料、チタン素材及び窒素固溶チタン粉末材料の製造方法, 近藤 勝義, 特願2014-011362, 出願日:2014/01
  • チタン粉末材料、チタン素材及び酸素固溶チタン粉末材料の製造方法, 近藤 勝義, 特願2014-003392, 出願日:2014/01
  • 球状シリカ粒子の製造方法, 近藤 勝義,他, 特願2013-147229, 出願日:2013/07
  • 黄銅合金焼結押出材およびその製造方法, 近藤 勝義,他, 特願2012-076016, 出願日:2012/03
  • 燃料棒およびその製造装置, 近藤 勝義,他, 特願2012-035261, 出願日:2012/02
  • 固形燃料棒, 近藤 勝義,他, 特願2012-001911, 出願日:2012/01
  • 固形燃料棒, 近藤 勝義,他, 特願2012-001910, 出願日:2012/01
  • 銅合金素材及びその製造方法, 近藤 勝義, 特願2011-233014, 出願日:2011/10
  • 高強度銅合金, 近藤 勝義,他, ・未着, 出願日:2011/09
  • 高強度銅合金, 近藤 勝義,他, 13/258,467, 出願日:2011/09
  • 炭素材料複合化粒子及びその製造方法, 近藤 勝義,他, PCT/JP2011/002027, 出願日:2011/04
  • Ti粒子分散マグネシウム基複合材料およびその製造方法, 近藤 勝義,他, 9811323.6, 出願日:2011/02
  • Ti粒子分散マグネシウム基複合材料およびその製造方法, 近藤 勝義,他, 13/060,084, 出願日:2011/02
  • Ti粒子分散マグネシウム基複合材料の製造方法, 近藤 勝義,他, 9811322.8, 出願日:2011/02
  • Ti粒子分散マグネシウム基複合材料の製造方法, 近藤 勝義,他, 13/060,078, 出願日:2011/02
  • マグネシウム合金素材の製造方法, 近藤 勝義,他, 12/999,319, 出願日:2010/12
  • 黄銅合金粉末、黄銅合金押出材およびその製造方法, 近藤 勝義,他, 12/991,259, 出願日:2010/11
  • 黄銅合金粉末、黄銅合金押出材およびその製造方法, 近藤 勝義,他, 9742676.1, 出願日:2010/11
  • Ti粒子分散マグネシウム基複合材料の製造方法, 近藤 勝義,他, ・200980114389.X, 出願日:2010/10
  • Ti粒子分散マグネシウム基複合材料およびその製造方法, 近藤 勝義,他, ・200980114158.9, 出願日:2010/10
  • マグネシウム合金素材の製造方法, 近藤 勝義,他, ・200880127954.1, 出願日:2010/09
  • 黄銅合金粉末、黄銅合金押出材およびその製造方法, 近藤 勝義,他, 特願2010-511043, 出願日:2010/09
  • マグネシウム合金素材の製造方法, 近藤 勝義,他, 8874711.8, 出願日:2010/07
  • Ti粒子分散マグネシウム基複合材料およびその製造方法, 近藤 勝義,他, 10-2010-7015578, 出願日:2010/07
  • Ti粒子分散マグネシウム基複合材料の製造方法, 近藤 勝義,他, 10-2010-7015461, 出願日:2010/07
  • 高強靭性マグネシウム基合金およびそれを用いた駆動系部品並びに高強靭性マグネシウム基合金素材の製造方法, 近藤 勝義,他, 12/782,052, 出願日:2010/05
  • マグネシウム合金素材の製造方法, 近藤 勝義,他, 10-2010-7011480, 出願日:2010/05
  • 複合金属材およびその製造方法, 近藤 勝義,他, 8841645.8, 出願日:2010/04
  • 複合金属材およびその製造方法, 近藤 勝義,他, ・200880112915.4, 出願日:2010/04
  • 押出用ビレットの製造方法およびマグネシウム合金素材の製造方法, 近藤 勝義,他, ・200880025197.7, 出願日:2010/01
  • 押出用ビレットの製造方法およびマグネシウム合金素材の製造方法, 近藤 勝義,他, 12/600,709, 出願日:2009/11
  • 押出用ビレットの製造方法およびマグネシウム合金素材の製造方法, 近藤 勝義,他, 8777405.5, 出願日:2009/11
  • 黄銅合金粉末、黄銅合金押出材およびその製造方法, 近藤 勝義,他, PCT/JP2009/058142, 出願日:2009/04
  • 高強度銅合金, 近藤 勝義,他, 特願2009-106162, 出願日:2009/04
  • Ti粒子分散マグネシウム基複合材料およびその製造方法, 近藤 勝義,他, PCT/JP2009/055027, 出願日:2009/03
  • Ti粒子分散マグネシウム基複合材料およびその製造方法, 近藤 勝義,他, PCT/JP2009/055026, 出願日:2009/03
  • 長尺合金ビレットの製造方法, 近藤 勝義,他, 特願2009-073989, 出願日:2009/03
  • 金属粉末の連続押出加工方法, 近藤 勝義,他, PCT/JP2008/070303, 出願日:2008/11
  • 複合金属材およびその製造方法, 近藤 勝義,他, PCT/JP2008/068746, 出願日:2008/10
  • 軽金属の押出成形方法, 近藤 勝義,他, 特願2008-200115, 出願日:2008/08
  • 押出用ビレットの製造方法およびマグネシウム合金素材の製造方法, 近藤 勝義,他, PCT/JP2008/061245, 出願日:2008/06
  • 長尺合金ビレットの製造方法, 近藤 勝義,他, 特願2008-162104, 出願日:2008/06
  • 黄銅合金粉末，黄銅合金押出材およびその製造方法, 近藤 勝義,今井 久志,他, 特願2008-121475, 出願日:2008/05
  • 複合金属粉末粒子および複合金属押出材ならびにそれらの製造方法, 近藤 勝義,他, 特願2008-107881, 出願日:2008/04
  • マグネシウム基複合材料の製造方法, 近藤 勝義,他, 10/541,758の分割出願, 出願日:2008/01
  • 銅合金押出材およびその製造方法, 近藤 勝義,他, 11/989,492, 出願日:2008/01
  • 銅合金押出材およびその製造方法, 近藤 勝義,他, ・200680027738, 出願日:2008/01
  • マグネシウム合金粉体原料、高耐力マグネシウム合金、マグネシウム合金粉体原料の製造方法及び高耐力マグネシウム合金の製造方法, 近藤 勝義,他, 11/922,226, 出願日:2007/12
  • マグネシウム合金粉体原料、高耐力マグネシウム合金、マグネシウム合金粉体原料の製造方法及び高耐力マグネシウム合金の製造方法, 近藤 勝義,他, 10-2007-7028476, 出願日:2007/12
  • マグネシウム合金粉体原料、高耐力マグネシウム合金、マグネシウム合金粉体原料の製造方法及び高耐力マグネシウム合金の製造方法, 近藤 勝義,他, 6766721.2, 出願日:2007/12
  • 銅合金押出材およびその製造方法, 近藤 勝義,他, 6781540.7, 出願日:2007/12
  • 金属粉末の連続押出加工方法, 近藤 勝義, 特願2007-323719, 出願日:2007/12
  • 無鉛快削性銅合金押出材およびその製造方法, 近藤 勝義,他, 特願2007-528465, 出願日:2007/11
  • 複合金属粉末粒子および複合金属押出材ならびにそれらの製造方法, 近藤 勝義,他, 特願2007-277505, 出願日:2007/10
  • 非晶質シリカおよびその製造方法, 近藤 勝義,他, 特願701005358, 出願日:2007/10
  • 非晶質シリカおよびその製造方法, 近藤 勝義,他, PCT/JP2007/070281, 出願日:2007/10
  • 高強度加工素材およびその製造方法ならびにその製造装置, 近藤 勝義,他, PCT/JP2007/069344, 出願日:2007/10
  • 摩擦材, 近藤 勝義,他, 特願2007-243407, 出願日:2007/09
  • 摩擦材, 近藤 勝義,他, 特願2007-243406, 出願日:2007/09
  • 押出用ビレットの製造方法およびマグネシウム合金素材の製造方法, 近藤 勝義,他, 特願2007-198556, 出願日:2007/07
  • マグネシウム基複合粉末、マグネシウム基合金素材およびそれらの製造方法, 近藤 勝義,他, 11/631,633, 出願日:2007/01
  • マグネシウム基複合粉末、マグネシウム基合金素材およびそれらの製造方法, 近藤 勝義,他, ・200580022584.1, 出願日:2007/01
  • マグネシウム基複合粉末、マグネシウム基合金素材およびそれらの製造方法, 近藤 勝義,他, EPC出願,特願5765162.2, 出願日:2006/12
  • 高強靭性マグネシウム基合金およびそれを用いた駆動系部品並びに高強靭性マグネシウム基合金素材, 近藤 勝義,他, 11/629,282, 出願日:2006/12
  • 非晶質シリカおよびその製造方法, 近藤 勝義,他, 特願2006-292838, 出願日:2006/10
  • 合金粉体原料およびその製造方法, 近藤 勝義,他, 4745278.4, 出願日:2006/09
  • 合金粉体原料およびその製造方法, 近藤 勝義,他, 10-2006-7018751, 出願日:2006/09
  • 合金粉体原料およびその製造方法, 近藤 勝義,他, ・200480042439.5, 出願日:2006/09
  • アモルファス酸化ケイ素粉末およびその製造方法, 近藤 勝義,他, PCT/JP2006/316948, 出願日:2006/08
  • 銅合金押出材およびその製造方法, 近藤 勝義,他, PCT/JP2006/314628, 出願日:2006/07
  • マグネシウム合金粉体原料、高耐力マグネシウム合金、マグネシウム合金粉体原料の製造方法および高耐力マグネシウム合金の製造方法, 近藤 勝義,他, PCT/JP2006/311952, 出願日:2006/06
  • 機能性貴金属製品およびその製造方法, 近藤 勝義,他, 特願2006-150270, 出願日:2006/05
  • 貴金属基複合材料の製造方法, 近藤 勝義,他, 特願2006-091557, 出願日:2006/03
  • 合金粉体原料の製造方法, 近藤 勝義,他, 特願2006-022016, 出願日:2006/01
  • バイオシリカメタル／Ｂｉｏ－Ｓｉｌｉｃａ Ｍｅｔａ, 近藤 勝義,他, 特願2006-004072, 出願日:2006/01
  • アトマイズ金粉末並びにそれを用いた導電性金ペースト, 近藤 勝義,他, PCT/JP2005/022461, 出願日:2005/12
  • バイオマスシリカ, 近藤 勝義,他, 特願2005-111532, 出願日:2005/11
  • 機能性貴金属製品およびその製造方法, 近藤 勝義,他, 特願2005-318354, 出願日:2005/11
  • バイオシリカ／Ｂｉｏ－Ｓｉｌｉｃａ, 近藤 勝義,他, 特願2005-089813, 出願日:2005/09
  • 白金粉末およびその製造方法, 近藤 勝義,他, PCT/JP2005/016251, 出願日:2005/09
  • アモルファス酸化ケイ素粉末およびその製造方法, 近藤 勝義,他, 特願2005-250593, 出願日:2005/08
  • 圧粉固化体およびその製造方法, 近藤 勝義,他, 特願2005-236573, 出願日:2005/08
  • マグネシウム複合粉末およびその製造方法ならびにマグネシウム基複合材料およびその製造方法, 近藤 勝義,他, 10/541,758, 出願日:2005/07
  • マグネシウム複合粉末およびその製造方法ならびにマグネシウム基複合材料およびその製造方法, 近藤 勝義,他, ・200380108504.5, 出願日:2005/07
  • マグネシウム複合粉末およびその製造方法ならびにマグネシウム基複合材料およびその製造方法, 近藤 勝義,他, 3768386.9, 出願日:2005/07
  • 銅合金押出材およびその製造方法, 近藤 勝義,他, 特願2005-219151, 出願日:2005/07
  • マグネシウム基複合粉末、マグネシウム基合金素材およびそれらの製造方法, 近藤 勝義,他, PCT/JP2005/011744, 出願日:2005/06
  • マグネシウム複合粉末およびその製造方法ならびにマグネシウム基複合材料およびその製造方法, 近藤 勝義,他, 特願2004-566307, 出願日:2005/06
  • マグネシウム合金粉体原料、高耐力マグネシウム合金、マグネシウム合金粉体原料の製造方法および高耐力マグネシウム合金の製造方法, 近藤 勝義,他, 特願2005-176410, 出願日:2005/06
  • 高強靱性マグネシウム基合金およびそれを用いた駆動系部品並びに高強靭性マグネシウム基合金素材の製造方法, 近藤 勝義,他, PCT/JP2005/009051, 出願日:2005/05

Awards

  • Cost Effective In-Situ Alloying of Ti-Fe via Laser Powder Bed Fusion, Metal Additive Manufacturing Outstanding Technical Paper Award for AMPM2023, J. Huang,A. Issariyapat,S. Kariya,J. Umeda,K. Kondoh, AMPM2023, 2023/07
  • Outstanding Technical Paper Award for AMPM2023, J. Huang, A. Issariyapat, S. Kariya, J. Umeda, K. Kondoh, Metal Powder Industries Federation, 2023/07
  • The EPMA Keynote Papers Award for World PM2022, K. Kondoh,A. Issariyapat,S. Kariya,S. Li,A. Alhazaa,J. Umeda, PM2022, 2022/10
  • Keynote paper awards, 近藤 勝義, World PM2022, 2022/10
  • 2021年度粉体粉末冶金協会研究進歩賞, 近藤 勝義,梅田 純子,Ammarueda Issariyapat,市川 絵理, (一社)粉体粉末冶金協会, 2022/05
  • 2021年度 論文賞, 寺西 未沙,勝又 美穂子,西川 宏,近藤 勝義,田中 学, グローバル人材育成教育学会, 2022/03
  • 70周年記念功労賞, 近藤 勝義, (一社)軽金属学会, 2021/11
  • 大阪大学賞 大学運営部門, 近藤 勝義, 大阪大学, 2019/11
  • 粉体粉末冶金協会平成30年度論文賞, 刈屋 翔太,福生 瑞希,梅田 純子,近藤 勝義, (一社)粉体粉末冶金協会, 2019/06
  • Outstanding Poster Award, S. Kariya,J. Umeda,K. Kondoh, 4th Osaka University-JWRI/NTU-MSE Workshop, 2019/03
  • 日本再生歯科医学会学術大会 優秀発表賞, 西田 絵利香,宮治 裕史,蔀 佳奈子,眞弓 佳代子,菅谷 勉,梅田 純子,近藤 勝義,古月 文志, 日本再生歯科医学会, 2018/12
  • 日本機械学会 部門賞（業績賞）, 近藤 勝義, 日本機械学会, 2018/09
  • 奨励講演論文賞, 近藤 勝義,山辺 康弘,梅田 純子,今井 久志, 日本機械学会, 2017/09
  • 平成28年度粉体粉末冶金協会研究進歩賞, 陳 彪,梅田 純子,近藤 勝義, (一社)粉体粉末冶金協会, 2017/05
  • スマートプロセス学会論文賞, 梅田 純子,藤井 寛子,近藤 勝義, スマートプロセス学会, 2017/05
  • 平成27年度科研費の審査委員表彰, 近藤 勝義, （独）日本学術振興会, 2015/11
  • ADM/JSDMD Joint Award for Young Investigator, W. Kiba,H. Imai,K. Kondoh,S. Imazato, 2015/10
  • 大阪大学総長による表彰, 近藤 勝義, 大阪大学, 2014/10
  • 大阪大学総長顕彰, 近藤 勝義, 大阪大学, 2014/07
  • 研究功績賞, 近藤 勝義, (一社)粉体粉末冶金協会, 2014/06
  • 平成26年度 科学技術分野の文部科学大臣表彰 科学技術賞(研究部門), 近藤 勝義,李 樹豊,梅田 純子, 文部科学省, 2014/04
  • 大阪大学総長顕彰, 近藤 勝義, 大阪大学, 2013/08
  • 平成24年度研究進歩賞, 近藤 勝義,今井 久志,李 樹豊,上坂 美治, (一社)粉体粉末冶金協会, 2013/05
  • 優秀論文講演奨励賞, 今井 久志,近藤 勝義,陳 冠宇, （一社）日本塑性加工学会, 2013/02
  • Thai Parkerizing Best professional Paper Award, J. Umeda,T. Mimoto,K. Kondoh,B. Fugetu, 2012/06
  • 軽金属学会60周年 関西賞(功績賞), 近藤 勝義, （社）軽金属学会, 2011/12
  • 平成23年度大阪大学功績賞, 近藤 勝義, 大阪大学, 2011/08
  • 第43回 市村学術賞 貢献賞, 近藤 勝義,今井 久志,小島 明倫, （財）新技術開発財団, 2011/04
  • 第33回 日本金属学会技術開発賞, 廖 金孫,堀田 真,閤師 昭彦,金子 貫太郎,近藤 勝義, （社）日本金属学会, 2010/09
  • 粉体粉末冶金協会 研究進歩賞, 近藤 勝義,古月 文志,今井 久志,梅田 純子, （社）粉体粉末冶金協会, 2010/02
  • Best Paper Award of Surface Treatment for Student, 5th Thailand Materials Science and Technology Conference, Thotsaphon Threrujirapapong,Katsuyoshi Kondoh,Hisashi Imai,Junko Umeda, Organizing Committee of MSAT-5, 2008/09
  • Best Paper Awards, Katsuyoshi Kondoh,Hisashi Imai, Organizing Committee of MSAT-5, 2008/09
  • Best Oral Presentation of Processing Session, 1st Thailand Metallurgy Conference, K. Kondoh,K. Kawabata,H. Oginuma, Iron and Steel Institute of Thailand (ISIT), 2007/10
  • 社団法人日本金属学会 技術開発賞, 近藤 勝義,荻沼 秀樹, （社）日本金属学会, 2006/09
  • 財団法人天田金属加工機械技術振興財団 研究優秀賞, 近藤 勝義, （財）天田金属加工機械技術振興財団, 2006/05
  • 社団法人日本塑性加工学会 技術開発賞, 近藤 勝義,荻沼 秀樹, （社）日本塑性加工学会, 2006/05
  • International Conference on Powder Metallurgy & Particulate Materials. Poster of Merit, Katsuyoshi Kondoh, Metal Powder Industries Federation (MPIF), 2005/06
  • 社団法人粉体粉末冶金協会 H16年度研究進歩賞, 近藤 勝義, （社）粉体粉末冶金協会, 2005/06
  • 社団法人日本マグネシウム協会 H16年度奨励賞, 近藤 勝義, （社）日本マグネシウム協会, 2005/06
  • 粉体粉末冶金協会 研究進歩賞, 近藤 勝義, （社）粉体粉末冶金協会, 2004/09
  • International Conference of PSTAM2003, Highly Contributed, K. Kondoh, Organizing Committee of PSTAM 2003, 2003/01
  • 溶接学会 論文賞, 近藤 勝義, （社）溶接学会, 2002/04
  • 溶接学会 研究発表賞, 近藤 勝義, （社）溶接学会, 2000/04

Presentations

  • Powder Based Titanium Alloys Strengthened by Ubiquitous Elements, 近藤 勝義, IConBET2023, 2023/08
  • 粉末冶金法を基調とした工程内チタン廃材の高度再資源化技術と応用, 近藤 勝義,刈屋 翔太,梅田 純子, 粉体粉末冶金協会2021年度秋季大会（第128回講演大会, 2021/11
  • 負の添加元素が拓くチタン積層造形材の力学機能化, 近藤 勝義, 大阪大学接合科学研究所 第18回 産学連携シンポジウム, 2021/07
  • Tribological properties of carbon nanotubes assisted light metal materials, J. Umeda,K. Kondoh, JWRI-IMS International Joint Lab, Online Seminar on Joining and Materials Science, 2021/03
  • Strengthening Mechanism of Selectively Laser Melted Ti-Zr Alloys, K. Kondoh,A. Issariyapat,J. Umeda, Smart MADE 2021, 2021/03
  • C=O結合を利用した樹脂-金属異材の直接接合プロセス, 近藤 勝義, 大阪大学接合科学研究所東京セミナー, 2020/10
  • 粉末冶金で作られる製品（粉末冶金製品や材料すべての概論）, 近藤 勝義, 第2回粉末冶金入門講座, 2020/10
  • チタン粉末積層造形体における酸素・窒素固溶強化と加工・熱処理の適用, 近藤 勝義, 粉体粉末冶金協会第12回粉末積層3D造形技術委員会, 2020/09
  • Advanced materials innovation saving the earth, Katsuyoshi Kondoh, UTM Engineering Distinguished Lecture Series, 2020/08
  • Oxygen and Nitrogen Solid Solution Strengthened Titanium Materials by Additive Manufacturing Process, Katsuyoshi Kondoh, JWRI-City University of Hong Kong Joint Workshop, 2019/11
  • Microstructural and Mechanical properties of Titanium with Solid-Solution Elements by Powder Metallurgy Process, Junko Umeda,Takuma Teramae,Kazuki Shitara,Katsuyoshi Kondoh, iLim-4, 2019/10
  • Oxygen and Nitrogen Solid Solution Strengthened Ti Materials by SLM, Katsuyoshi Kondoh,Ammarueda Issariyapat,Junko Umeda, Smart MADE 2019, 2019/09
  • State-of-the-art carbon nanomaterials reinforced aluminum composites, Katsuyoshi Kondoh, CCAM 2019, 2019/08
  • Strength and strain hardening of additively manufactured AlSi10Mg alloys, B. Chen,K. Kondoh, APICAM2019, 2019/06
  • Nitrogen Solid Solution Strengthening in AM Titanium Materials, K. Kondoh,A. Issariyapat,J. Umeda, APICAM2019, 2019/06
  • Rare Metals Free Titanium Alloys Enhancing High Strength and Ductility by Atomic-Scale Microstructures Control, K. Kondoh,S. Kariya,T. Tanaka,J. Umeda, ICMAT2019, 2019/06
  • Novel titanium materials with atomic/nano-scale microstructures by powder metallurgy process, K. Kondoh, IWAMSN 2018, 2018/11
  • State-of-The-Art Titanium Alloys by Powder Metallurgy Process, K. Kondoh, MSAT-10, 2018/09
  • State-of-the-art powder metallurgy light metals and their composites with atomic/nano-scale microstructures, K. Kondoh, ICMMP2018, 2018/06
  • 鉄原子固溶α/β２相チタン焼結合金の強化機構, 近藤 勝義, 粉体粉末冶金協会平成30年度春季大会, 2018/05
  • Solid-state Sintering of Al Alloy Powder and AlN Synthesis in Sintering, Katsuyoshi Kondoh, TMS2018, 2018/03
  • 材料の脆化を利用した高効率粉砕加工とバルク体への再生プロセス, 近藤 勝義, 粉体の機械的単位操作に関する参加型講演会, 2017/11
  • State of the Art Titanium Alloys by Powder Metallurgy Process, K. Kondoh, 3rd International Conference on the Science and Engineering of Materials (ICoSEM2017), 2017/10
  • Solid solution strengthened powder metallurgy Ti materials, K. Kondoh, PMTi2017, 2017/09
  • 焼成籾殻中の脆性炭化物を利用した非晶質シリカ微粒子の生成プロセス, 梅田 純子,藤井 寛子,近藤 勝義, 2017年春季総合学術講演会, 2017/05
  • The Current Research Activities regarding Materials Science and Engineering Processing Technology in Osaka-Japan, Katsuyoshi Kondoh, The FTUI Seminar Series 2017, 2017/05
  • PM Titanium Alloys with High Strength and Ductility by Using Ubiquitous Elements and Phase Transformation, K. Kondoh, APMA 2017, 2017/04
  • State of The Art Materials Science in "Novel Light Metals", K. Kondoh,J. Umeda,S. Kariya,M. Fukuo, 10th Thailand-International Metallurgy Conference, 2017/03
  • 水素を利用したチタン合金切削屑の高効率再資源化技術の実用化研究, 近藤 勝義, 平成28年度 環境省 循環型社会形成推進研究発表会「再資源化のための要素技術の研究・開発」, 2016/12
  • Novel Light Metals, Katsuyoshi Kondoh, The 18th Academic Exchange Seminar between Shanghai Jiao Tong University and Osaka University, 2016/12
  • Atomic/Nano-scale Metal Matrix Composite Materials by Powder Metallurgy Route, Katsuyoshi Kondoh, The Workshop between JWRI and University of Indonesia, 2016/11
  • Biomedical Assessment of Titanium coated with Carbon Nanotubes, H. Miyaji,E. Nishida,J. Umeda,K. Kondoh,H. Takita,T. Iizuka,T. Akasaka,S. Tanaka,A. Kato,B. Fugetsu,T. Sugaya, Symposium on the Research Activities of Joint Usage / Research Center on Joining and Welding, 2016/10
  • Tribological Property of Nitrogen Solute α-titanium Powder Material, Katsuyoshi Kondoh,Yasuhiro Yamabe,Hisashi Imai,Junko Umeda, Materials Science & Technology 2016(MS&T16), 2016/10
  • Direct bonding of plastic materials to metals using C=O double bond and its bonding, Katsuyoshi Kondoh,Junko Umeda,Hisashi Imai, 10th International Conference on Trends in Welding Research & 9th International Welding Symposium of Japan Welding Society (9WS), 2016/10
  • 最新の接合技術～分子構造変化を利用した複合材料と金属の直接接合～, 近藤 勝義, 北陸経済連合会講演会, 2016/04
  • Effect of Initial State on Dispersion Evolution of Carbon Nanotubes in Aluminum Matrix Composites during High Energy Ball Milling Process, Katsuyoshi Kondoh,Biao Chen,Hisashi Imai,Junko Umeda, TMS 2016, 2016/02
  • Osaka University: No.1 innovative university in Japan, Katsuyoshi Kondoh, International Symposium in Qatar, Joining Technologies and Materials Science -Expand collaboration network in Middle East-, 2015/12
  • Direct bonding mechanism of metals with CFRPs using C=O double bonds, Katsuyoshi Kondoh, NTU-JWRI Workshop on Joining and Welding Technology, 2015/12
  • State-of-the-Art in Powder Metallurgy Materials with Atomic/Nano scale Microstructures (Plenary Talk), Katsuyoshi Kondoh, Global Advanced Materials & Surfaces Forum (GAMS 2015), 2015/12
  • State of The Art PM Ti Materials with Ubiquitous Light Elements (Invited), Katsuyoshi Kondoh, PM Titanium 2015: 3rd conference on Powder Processing, Consolidation and Metallurgy of Titanium, 2015/08
  • State-of-the-Art in Metal Matrix Composites Reinforced with Carbon Nanotubes by Powder Metallurgy Process (Plenary Talk), Katsuyoshi Kondoh, Nanotech France 2015 International Conference & Exhibition, 2015/06
  • In-situ formed AlN dispersed aluminum composite via powder metallurgy route, Katsuyoshi Kondoh,Motohiro Onishi,Lei Jia,Junko Umeda,Hisashi Imai, TMS 2015, 2015/03
  • PM aluminum composite reinforced with Al4C3 nano-rods, Katsuyoshi Kondoh,Biao Chen,Lei Jia,Junko Umeda,Hisashi Imai, TMS 2015, 2015/03
  • State-of-Art of Powder Metallurgy Titanium, K. Kondoh,T. Mimoto,J. Umeda,H. Imai,L. Jia, 2nd JWRI-MSE Workshop on Materials Design and Joining 2015, 2015/01
  • 軽元素を利用した純チタン焼結材の高次機能化, 近藤 勝義, 特別講演会“Advanced Powder Metallurgy Processing & Additive Manufacturing of Ti”, 2014/12
  • 粉末焼結の基礎, 近藤 勝義, 第22回新粉末冶金入門講座, 2014/12
  • 粉体プロセスによる金属材料の高次機能化, 近藤 勝義, 第7回先端複合材料研究センター コロキウムプログラム, 2014/12
  • 仕事を理想に近づける, 近藤 勝義, 大阪大学×ナレッジキャピタル/研究ときめき＊カフェ, 2014/11
  • Academic Collaboration Networking for Globalization in Asia, Katsuyoshi Kondoh, International Symposium of Globalization in Joining Technology and Materials Science- Collaboration Networking in Asia-, 2014/11
  • ユビキタス軽元素を利用した純チタン焼結材料の高次機能化, 近藤 勝義, 第52回材質制御研究会, 2014/10
  • 粉末冶金法による非鉄系金属材料の高次機能化に関する研究, 近藤 勝義, 粉体粉末冶金協会平成26年度春季大会 研究功績賞受賞記念講演, 2014/06
  • 第三成分固溶による次世代医療用材料の開発, 近藤 勝義, ニューセラミックス懇話会 バイオ関連セラミックス分科会第45回研究会, 2014/05
  • 広域アジアでのネットワーク形成とカップリングインターンシップ, 近藤 勝義, 2014国際ウエルディングショー, 2014/04
  • 軽元素によるチタン焼結材料の高強度・高延性発現機構, 近藤 勝義,三本 嵩哲,李 樹豊,今井 久志,梅田 純子, 粉体粉末冶金協会平成25年度春季大会 招待講演, 2013/05
  • 完全鉛フリー・快削性高強度黄銅粉末合金に関する研究, 近藤 勝義,今井 久志,李 樹豊,上坂 美治, 粉体粉末冶金協会平成25年度春季大会 研究進歩賞受賞記念講演, 2013/05
  • Mechanical Properties of Titanium Metal Matrix Composites Prepared by In-situ Reactive Processing of Ti-B4C System via Powder Metallurgy, Shufeng Li,Katsuyoshi Kondoh,Hisashi Imai,Junko Umeda, 1st Japan-Taiwan Workshop on Materilas Design and Joining, 2013/05
  • Light Elements Solid Solution Strengthening Behavior of Powder Metallurgy Pure Ti Material, Katsuyoshi Kondoh,Takanori Mimoto,Li Shufeng,Hisashi Imai,Junko Umeda, 1st Japan-Taiwan Workshop on Materilas Design and Joining, 2013/05
  • CNT単分散化によるチタンの静的・動的強度および耐熱性の向上に関する研究, 近藤 勝義, （独）宇宙航空研究開発機構（JAXA）研究発表会, 2012/12
  • 粉末冶金の基礎と応用, 近藤 勝義, 日本塑性加工学会関西支部 第14回塑性加工基礎講座, 2012/12
  • 金属材料の原子・ナノスケール化～その嬉しさは？ 何に使う・使えるか？, 近藤 勝義, ナノテクノロジー研究会, 2012/11
  • 粉体プロセスによる金属材料の高次機能化と医療機器への応用, 近藤 勝義, ネオマテリアル創成研究会 第20回研究会, 2012/10
  • Multi-Walled Carbon Nanotubes Reinforced Metal Matrix Composites, K. Kondoh, 3rd Asian Symposium on Materials and Processing, 2012/08
  • High Strength and Ductility Mechanism of Pure Titanium Materials with Oxygen Solid Solution via Powder Metallurgy Route, K. Kondoh,N. Nakanishi,T. Mimoto,J. Umeda, The 8th International Forum on Advanced Materials Science and Technology (IFAMST-2012), 2012/08
  • カーボンナノチューブによる先進金属材料の創製（Carbon nanotubes utilization for advanced metal materials), 近藤 勝義, フラウンホーファーOPER・阪大接合研・産総研関西センター3機関連携セミナー, 2012/06
  • Carbon Nanotubes Reinforced Titanium Powder Composite Materials, K. Kondoh,B. Sun,S. Li,J. Umeda, 7th International Conference on Materials science and Technology (MSAT7), 2012/06
  • 環境・人体に優しい高強度・快削性黄銅合金の実用化研究, 近藤 勝義, 平成23年度JSTイノベーションプラザ大阪 第2回成果報告会, 2011/12
  • Multi-Walled Carbon Nanotubes Reinforced Titanium Composites via Powder Metallurgy Process, Katsuyoshi Kondoh,Thotsaphon Threrujirapapong,Sun Bin,Hisashi Imai,Li Shufeng,Junko Umeda,Bunshi Fugetsu, International Conference of Powder Processing, Consolidation and Metallurgy of Titanium 2011, 2011/12
  • Un-bundled MWCNTs reinforced metal matrix composites by powder metallurgy process, K. Kondoh, Nanocarbon2011 in Nagano, Session1:Nanocarbons for Green Innovation, 2011/11
  • Pb-free high-strength Cu-Zn alloy via powder metallurgy route, K. Kondoh, 1st International Conference on Powder Metallurgy in Asia (APMA2011), 2011/11
  • Metal Surface Modification by Un-Bundled Carbon Nanotube Coating, K. Kondoh, 3rd International Conference on Nano Carbons (Stuttgart Nanodays 2011), 2011/09
  • Environmentally benign materials - Pb-free Cu-Zn alloys via powder metallurgy process, K. Kondoh, Symposium of environmental materials and advanced energy technology, 2011/09
  • Recent research topics on carbon nano-materials reinforced metal matrix composites, K. Kondoh, Nano-Materials and Processing Symposium, 2011/09
  • Un-Bundled Carbon Nanotubes Reinforced Light Powder Metals via Solid-State Bonding Process, K. Kondoh,H. Fukuda,T. Threrujirapapong,J. Umeda,B. Fugetsu, 2nd International Conference on Advanced Materials Development and Integration of Novel Structured Metallic and Inorganic Materials (AMDI2), 2011/06
  • CNT分散強化軽合金複合材料の機能と界面, 近藤 勝義, 日本金属学会・日本鉄鋼協会東海支部 学術討論会 車体・部材の軽量化を支える材料技術最前線, 2011/01
  • カーボンナノチューブと金属の融合素材の開発について, 近藤 勝義, 「活力ある地域産業の創造に向けて」～北陸のものづくり産業が生き残るために～, 2011/01
  • 安全・安価なハイブリッド式バイオマス利活用技術による農作物非食部のエネルギー・再資源化と産地での完全消費・循環システムの基盤構築に関する研究, 近藤 勝義, 平成22年度循環形社会形成推進研究発表会, 2010/12
  • 籾殻の完全再資源化によるバイオマス由来のエネルギーと資源の抽出, 近藤 勝義, 次世代・再生可能エネルギーシンポジウム ～環境・エネルギープロフェッショナルからの提言～, 2010/11
  • 環境低負荷型鉛フリー黄銅合金の強化機構, 近藤 勝義, 焼結研究会, 2010/10
  • Advanced powder Metallurgy processing for nano-composites and environmentally benign materials, Katsuyoshi Kondoh, Metal Matrix Composites Seminar, Tianjin University, 2010/10
  • The Development of Superior Magnesium Alloy AMX602 using a Novel Rapid Solidification Process for Structural Applications, T. Jones,K. Kondoh,B. Placzankis, Materials Science & Technology (MS&T) 2010, 2010/10
  • 粉末焼結法を用いた完全鉛フリー高強度・快削性黄銅合金の開発, 近藤 勝義, 第1回EMAP研究会, 2010/10
  • 高耐衝撃性マグネシウム合金の製造技術の開発, 廖 金孫,堀田 真,閤師 昭彦,金子 貫太郎,近藤 勝義, （社）日本金属学会 技術開発賞受賞講演, 2010/09
  • Advanced Powder Metallurgy Metals by Metal Working, Katsuyoshi Kondoh,Kantarou Kaneko,Toru Akita, The 13th International Conference on Metal Forming (Metal Forming 2010), 2010/09
  • Features of light metal matrix composites reinforced with un-bundled carbon nanotubes via wet process, K. Kondoh, NanoDays 2010, 2010/09
  • 粉末冶金法による鉛フリー高強度・快削性黄銅合金の開発，, 近藤 勝義,今井 久志,上坂 美治,小島 明倫, （社）粉体粉末冶金協会平成22年度春季大会 特別講演, 2010/05
  • 孤立単分散カーボンナノチューブ被覆金属複合粉末と焼結材の高機能化, 近藤 勝義,古月 文志,今井 久志,梅田 純子, （社）粉体粉末冶金協会平成22年度春季大会 協会賞受賞記念講演, 2010/05
  • Solid-state Recycle of Mg Alloy Wastes via Powder Metallurgy Process, K. Kondoh,K. Kaneko, The Eighteenth International Conference on Processing and Fabrication of Advanced Materials (PFAM 18), 2009/12
  • 非食部バイオマスの再資源化とエネルギー生成に関する研究動向と今後, 近藤 勝義, 昭和教育振興財団講演会, 2009/11
  • 粉体加工による非鉄金属の複合化・多機能化, 近藤 勝義, （社）日本塑性加工学会関西支部 第131回見学会および塑性加工懇談会, 2009/09
  • マグネシウムによる純チタンの高温濡れ現象, 近藤 勝義, （社）溶接学会 界面接合研究委員会, 2009/09
  • 急冷プロセスによる微細構造を有するマグネシウム粉末合金の組織と力学特性, 近藤 勝義,El-Sayed Ayman Hamada,今井 久志, （社）日本機械学会2009年度年次大会, 2009/09
  • High-strengthened and Cost-effective Titanium Composites Reinforced with Carbon Nanotubes and In Situ Formed Oxides, K. Kondoh, International Conference Stuttgart Nonodays, 2009/09
  • 金属と炭素系材料との複合化・高機能化, 近藤 勝義, 同志社大学 第11回複合材料研究センター発表会, 2009/06
  • ナノチューブと金属材料との複合化・高機能化, 近藤 勝義, 平成21年度第1回カーボンナノ材料研究会, 2009/05
  • 金属粉末とCNTとの複合化による焼結材の多機能化, 近藤 勝義, トヨタ材料研究部会講演会, 2009/03
  • 非食部バイオマスの高度再資源化プロセス開発 -籾殻からエネルギーと素材の回収-, 近藤 勝義, 高分子学会同友会バイオマス講演会, 2009/01
  • 地球環境に配慮したMg合金の固相再利用技術の現状と展望, 近藤 勝義, 日本機械学会北陸信越支部・特別講演会「マグネシウム合金リサイクル技術の研究動向と将来展望」, 2008/10
  • マグネシウム基複合材料の界面濡れ性と組織・力学特性, 近藤 勝義, 第13回焼結研究会, 2008/08
  • 粉末アルミニウム合金の固化形成と焼結, 近藤 勝義, 第3回新素材・加工技術研究セミナー, 2007/12
  • 粉体プロセスが生み出す高機能化・複合化技術 - ミリ・ミクロン・ナノの階層的多機能・複合化 -, 近藤 勝義, 新規事業研究会, 2007/11
  • 塑性加工を利用したMg粉末合金の機械的特性と集合組識, 近藤 勝義,小栗 孝道,川端 健詞, 第12回焼結研究会, 2007/11
  • 両性イオン界面活性剤を用いた孤立単分散CNT被覆金属粉末, 近藤 勝義,福田 博之,今井 久志,古月 文志, 第12回焼結研究会, 2007/11
  • High-strength magnesium alloy via repeated plastic deformation, K. Kondoh,T. Oguri,H. Imai,K. Kawabata, 2nd Asian Symposium on Magnesium Alloys (ASAMA-II), 2007/10
  • RFスパッタ法を用いたZr-Cu2元系アモルファス薄膜の創製と構造解析, 近藤 勝義,芹川 正,川端 健詞,木村 久道,井上 明久, 文部科学省科学研究費・特定領域研究「金属ガラスの材料化学」, A01班金属ガラスの最適構造化プロセス・第4回研究会, 2007/09
  • アルミ粉末表面の酸化皮膜の分解挙動と窒化反応を利用したAlN分散Al基複合材料の創製, 近藤 勝義, 塑性加工学会分科会・粉体加工成形プロセス委員会, 2007/03
  • 粉体・加工技術によるマグネシウム合金の微細組織化, 近藤 勝義, 塑性加工学会・軽量化材料研究委員会第4回研究会, 2007/03
  • 強塑性加工を利用した超高耐腐食性Mg2Si成膜プロセスの開発, 近藤 勝義, 塑性加工学会・天田金属加工機械技術振興財団記念研究助成事業研究成果発表会, 2006/05
  • 粉体プロセスを利用した高強靱性マグネシウム展伸材料の創製, 近藤 勝義, 財団法人新産業創造研究機構 先端マグネシウム研究会, 2006/03
  • Si-O系燃焼灰の高付加価値・再資源化技術, 近藤 勝義, 財団法人日本環境衛生センター 第5回廃棄物対策研究発表会, 2005/11
  • 粉体プロセスによるマグネシウム合金の微細組識制御と高強靭性化, 近藤 勝義, 粉体工業展2005年度秋期研究発表会, 2005/10
  • High-Strengthened Magnesium Alloys by Employing Coarse Powder with Refined Grains, K. Kondoh,H. Oginuma,M. Sumida,S. Shiozaki,Y. Goho, 1st Asian Symposium on Magnesium Alloys, 2005/10
  • Surface Modification of Magnesium Alloy by Mg2Si Coating Technology, K. Kondoh,T. Serikawa,H. Oginuma,and T. Yamaguchi, Second JSME/ASME Conf. on Materials and Processing, M&P2005, 2005/06
  • マグネシウム合金に関わる固相リサイクル技術, 近藤 勝義, 金属学会セミナー（マグネシウム合金の製造と加工技術の最先端）, 2005/03