Fusion Structural Materials Development in Broader Approach (BA) Activities

NOZAWA Takashi, RUAN Xiaoyong, SERIZAWA Hisashi, MORI Hiroaki, OTSUKA Teppei, HARA Masanori, CHIKADA Takumi

J. Plasma Fusion Res.　Vol. 100　No. 2　p. 77-102　2023/10

Study on Shear Fatigue Properties of Dissimilar Lap Joints for Multi-Material Structures

H. Serizawa, K. Inose, R. Ohashi, Y. Sugimoto, T. Minoda, T. Murakami

Quarterly J. Japan Welding Soc.　Vol. 41　No. 1　p. 133-140　2023/02　Research paper (scientific journal)

Study on Tensile Shear Strength of Dissimilar Lap Joints for Multi-Material Structures

H. Serizawa, K. Inose, R. Ohashi, Y. Sugimoto, T. Minoda, T. Murakami

Quarterly J. Japan Welding Soc.　Vol. 41　No. 1　p. 124-132　2023/02　Research paper (scientific journal)

Friction Stir Spot Welding and its Weld-Bond of Aluminum Alloy and CFRP

Y. Sugimoto, S. Mineoka, H. Serizawa

Journal of the Japan Institute of Light Metals　Vol. 72　No. 10　2022/10　Research paper (scientific journal)

Study on Mechanical Properties of Advanced Multi-Material Dissimilar Lap Joint

H. Serizawa

Proceedings of IIW2022 - International Conference on Welding and Joining　p. 567-570　2022/07　Research paper (international conference proceedings)

Laser Cladding of Copper Powder on Tungsten for Divertor in ITER By Multiple Laser Beams Focusing System

H. Serizawa, Y. Sato, M. Tsukamoto, T. Nozawa, H. Tanigawa

Journal of Japan Laser Processing Society　Vol. 29　No. 2　p. 22-28　2022/06

Galvanic Corrosion and its Reliability Evaluation in Joining Dissimilar Materials

S. Fujita, T. Kozaki, H. Serizawa

Journal of the Japanese Society for Strength and Fracture of Materials　Vol. 55　No. Special Issue　p. 19-26　2022/05　Research paper (conference, symposium, etc.)

Study on Shear Fatigue Properties of Dissimilar Lap Joints for Multi-Material Structures

H. Serizawa, K. Inose, R. Ohashi, Y. Sugimoto, T. Minoda, T. Murakami

Proceedings of Syposium on Joining Technologies in Advanced Automobile Assembly 2021.　p. 147-153　2021/11　Research paper (conference, symposium, etc.)

Study on Tensile Shear Strength of Dissimilar Lap Joints for Multi-Material Structures

H. Serizawa, K. Inose, R. Ohashi, Y. Sugimoto, T. Minoda, T. Murakami

Proceedings of Syposium on Joining Technologies in Advanced Automobile Assembly 2021.　p. 130-137　2021/11　Research paper (conference, symposium, etc.)

Development of the Technique to Predict Penetration of the Arc-welding

K. Iwashita, R. Tamaki, T. Okamoto, K. Iyama, T. Azama, F. Miyasaka, H. Serizawa

Proceedings of Syposium on Joining Technologies in Advanced Automobile Assembly 2021.　p. 73-76　2021/11　Research paper (conference, symposium, etc.)

Committee of Joining and Materials Processing for Light Structures

H. Serizawa, M. Iyota, T. Ogura, M. Kimura, T. Satsuta, T. Yasui, T. Ikeshoji

Journal of the Japan Welding Society　Vol. 90　No. 5　p. 71-81　2021/07

Development of New Particle Method based on MPS and Its Applicability for Friction Stir Welding of Dissimilar Joint

H. Serizawa, K. Mitsufuji, F. Miyasaka

Materials Science Forum　Vol. 1016　p. 218-222　2021/01　Research paper (scientific journal)

レーザ局所過熱を用いたセラミックス複合材料 －金属材料の異材接合技術の開発

中里 直史, 岸本 弘立, 西條 友章, 芹澤 久, 佐藤 雄二, 塚本 雅裕

生産と技術　Vol. 72　No. 4　p. 9-11　2020/09

Investigation about the Influence of Material Properties in High Temperature for Welding Deformation Analysis

A. Kunugi, H. Ueda, N. Ma, H. Serizawa

Proceedings of National Symposium on Welding Mechanics and Design 2019　p. 492-496　2019/12　Research paper (conference, symposium, etc.)

Objectives and Activities of Research Grope for Practical Use of Welding Mechanics Simulation

M. Shibahara, A. Kawahara, M. Nakatani, Y. Yamazaki, K. Oda, S. Tadano, Y. Nakatani, D. Takakura, H. Fukazawa, A. Kunugi, S. Narita, N. Yanagida, H. Murakami, T.Onozato, T. Noto, N. Otani, H. Ueda, H. Nagaki, S. Maeda, H. Serizawa, N. Ma, H. Murakawa

Proceedings of National Symposium on Welding Mechanics and Design 2019　p. 469-472　2019/12　Research paper (conference, symposium, etc.)

Numerical Analysis of Friction Stir Welding Process for V-Alloy/Stainless Steel Joint By Using Improved Particle Method

H .Serizawa, H. Ogura, K. Mitsufuji, F. Miyasaka

Proceedings of National Symposium on Welding Mechanics and Design 2019　p. 433-439　2019/12　Research paper (conference, symposium, etc.)

Numerical Prediction of Penetration Shape in Practical Steel MAG Welded Joint with Point Heat Source

S. Sato, H. Serizawa, F. Miyasaka

Proceedings of National Symposium on Welding Mechanics and Design 2019　p. 420-427　2019/12　Research paper (conference, symposium, etc.)

Laser Cladding of Copper Powder on Tungsten By Using Multiple Laser Beams Focusing System

H. Serizawa, J. Shimaoka, Y. Sato, T. Hara, M. Tsukamoto, H. Tanigawa

Proceedings of National Symposium on Welding Mechanics and Design 2019　p. 57-60　2019/12　Research paper (conference, symposium, etc.)

Computational Prediction of Penetration Shapes in MIG Welding of Practical Aluminum Alloy Joints

H. Serizawa, S.Sato, F. Miyasaka

Mathematical Modelling of Weld Phenomena　Vol. 12　p. 17-26　2019/08　Research paper (international conference proceedings)

Experimental Studies on Joinability of Zircaloy and SiC/SiC Composite with Titanium Powder

H. Serizawa, N. Nakazato, Y. Sato, M. Tsukamoto, J.S. Park, H. Kishimoto

International Journal of Ceramic Engineering & Science　Vol. 1　p. 56-62　2019/05　Research paper (scientific journal)

Influences of laser condition and slit shape on join ability zircaloy-SiC/SiC composite tube joint

Hisashi Serizawa, Yuji Sato, Masahiro Tsukamoto, Hirotaka Motoki, Yuuki Asakura, Joon Soo Park, Akira Kohyama, Naofumi Nakazato, Hirotatsu Kishimoto

Ceramic Engineering and Science Proceedings　Vol. 39　No. 2　p. 241-250　2019　Research paper (international conference proceedings)

Effect of Slit Shape on Joinability of Zircaloy - SiC/SiC Composite Tube Joint with Titanium Powder

H. Serizawa, Y. Sato, N. Nakazato, M. Tsukamoto, H. Kishimoto

Materials Science Forum　Vol. 941　p. 1944-1949　2018/12　Research paper (scientific journal)

Development of the Technique to Predict Penetration of the Arc-Welding

Y. Sugimoto, Y. Takatou, T. Ikuta, T. Azama, F. Miyasaka, H. Serizawa

Proceedings of International Sympoium on Joining Technologies in Advanced Automobile Assembly 2018 (JAAA2018)　p. 49-50　2018/11　Research paper (international conference proceedings)

Numerical Analysis of Penetration Shape in Steel MAG Welded Joint By Using Point Heat Source

S. Sato, H. Serizawa, F. Miyasaka

Proceedings of International Sympoium on Joining Technologies in Advanced Automobile Assembly 2018 (JAAA2018)　p. 47-48　2018/11　Research paper (international conference proceedings)

Joint Inhomogeneity in Dissimilar Friction Stir Welded Martenstic and Nanostructured Ferritic Steels

W.H. Han, F. Wan, K. Yabuuchi, H. Serizawa, A. Kimura

Science and Technology of Welding and Joining　Vol. 23　p. 659-665　2018/09　Research paper (scientific journal)

Improvement of Fabrication Technologies and the Design of Spallation Mercury Target Vessel for Higher Power Operation

E. Wakai, T. Wakui, H. Kogawa, T. Naoe, W.H. Guan, H. Kinoshita, K. Hanano, K. Haga, H. Takada, M. Futakawa, M. Kimura, R. Ueha, Y. Kihara, K. Sennyu, K. Kanomata, T. Shimada, H. Serizawa, H. Mori

Proceedings of the 15th Annual Meeting of Particle Accelerator Society of Japan　Vol. 15th　p. 181-184　2018/08　Research paper (conference, symposium, etc.)

2017 Tend of Welding & Joining in Japan -Committee of Joining and Materials Processing for Light Structures-

H. Serizawa, M. Matsushita, T. Matsumoto, M. Kimura, T. Satsuta, T. Yasui, T. Ikeshoji

Journal of the Japan Welding Society　Vol. 87　No. 5　p. 66-75　2018/07

Influence of friction stir welding conditions on joinability of V-alloy/SUS316L dissimilar joint

Hisashi Serizawa, Hirotaka Ogura, Yoshiaki Morisada, Hidetoshi Fujii, Hiroaki Mori, Takuya Nagasaka

Nuclear Materials and Energy　Vol. 15　p. 43-47　2018/05/01　Research paper (scientific journal)

Development of Computing Methods for Analysis of Joining-Induced Thermal Conduction, Residual Stress and Deformation in Thin Plates

N. Ma, H. Serizawa

Journal of Smart Processing -for Materials, Environment & Energy-　Vol. 7　No. 1　p. 14-20　2018/01

Impact of Friciton Stir Welding on Recrystallization of Oxide Dispersion Strengthened Ferritic Steel

W.H. Han, P. Liu, X. Yi, Q. Zhan, F. Wan, K. Yabuuchi, H. Serizawa, A. Kimura

Jounal of Materials Science & Technology　Vol. 34　p. 209-213　2018/01　Research paper (scientific journal)

Development of computing methods for analysis of joining-induced thermal conduction, residual stress and deformation in thin plates

Ninshu Ma, Hisashi Serizawa

Journal of Smart Processing　2018/01

Recent Status of R&D in Fabrication Technology of Mercury Target Vessel (Mudule) for High-Intensity Operation

Eiichi Wakai, Takashi Wakui, Hiroyuki Kogawa, Takashi Naoe, Wenhai Guan, Katsuhiro Haga, Hisashi Serizawa, Hiroaki Mori, Katsuhiko Horiguchi, Hiroshi Takada, Kazumi Yasu, Yutaka Kushida, Taiyu Li, Masatoshi Fuatakawa

Proceedings of the 14th Annual Meeting of Particle Accelerator Society of Japan　Vol. 14th　p. 166-169　2017/12　Research paper (conference, symposium, etc.)

Study on V Alloy/Stainless Steel Dissimilar Joint made by Friction Stir Welding

H. Ogura, H. Serizawa, Y. Morisada, H. Fujii, H. Mori, T. Nagasaka

Proceedings of National Symposium on Welding Mechanics and Design 2017　p. 177-180　2017/12　Research paper (conference, symposium, etc.)

Study on Packing Method of Ti Powder in Joining Process of Zircaloy and SiC/SiC Compoistes By Using Laser

H. Motoki, H. Serizawa, Y. Asakura, N. Nakazato, Y. Sato, M. Tsukamoto, J.S. Park, H. Kishimoto, A. Kohyama

Proceedings of National Symposium on Welding Mechanics and Design 2017　p. 135-140　2017/12　Research paper (conference, symposium, etc.)

Numerical Ananlysis of Penetration Shape in Practical Aluminum Joint By Using 3D Non-Stationary Thermal Model

S. Sato, H. Serizawa, F. Miyasaka

Proceedings of National Symposium on Welding Mechanics and Design 2017　p. 125-130　2017/12　Research paper (conference, symposium, etc.)

Development of laser welding technology for fully austenitic stainless steel

Katsutoshi Takano, Norikiyo Koizumi, Hisashi Serizawa, Shuho Tsubota, Yoshinobu Makino

Welding International　Vol. 31　No. 11　p. 827-836　2017/11/02　Research paper (scientific journal)

Deformation of Dissimilar-Metals Joint between F82H and 316L in Impact Tests after Neutron Irradiation

H.Y. Fu, T. Nagasaka, M. Yamazaki, T. Toyama, W.H. Guan, S. Nogami, H. Serizawa, H. Tanigawa

Fusion Engineering and Design　Vol. 124　p. 1063-1067　2017/11　Research paper (scientific journal)

Dissimilar-metals bonding between NIFS-HEAT-2 vanadium alloy and Hastelloy X nickel alloy by controlling intermetallics

Haiying Fu, Takuya Nagasaka, Teruya Tanaka, Akio Sagara, Hisashi Serizawa, Yuhki Satou

Fusion Science and Technology　Vol. 72　No. 4　p. 680-685　2017/11/01　Research paper (international conference proceedings)

十字継手引張試験の J 積分評価の高精度化に関する研究

高橋晶, 石坂達郎, 岡田裕, 遊佐泰紀, 村川英一, 芹澤久, 田中智行, 千葉晃司

日本機械学会 第30回計算力学講演会（CMD2017）　2017/09

Large Deformation Elasto-Plastic Analysis and J-Integral Evaluation for Cross Tension Strength Test Assuming the Presence of Crack

Vol. 22　2017/05

New Combined Method of MPS and FEM fro Simulating Friction Stir Processing

H. Serizawa, F. Miyasaka

Ceramic Engineering and Science Proceedings　Vol. 38　No. 3　2017/01　Research paper (international conference proceedings)

Development of Line-Type Heat Source for Finger Type Penetration in MIG Welding

H. Serizawa, M. Yoshiyama, F. Miyasaka

Mathematical Modelling of Weld Phenomena　Vol. 11　p. 51-61　2017/01　Research paper (international conference proceedings)

Development of joining method between zircaloy and Sic/Sic composite tubes by using diode laser

Hisashi Serizawa, Yuuki Asakura, Hirotaka Motoki, Daisuke Tanigawa, Masahiro Tsukamoto, Joon-Soo Park, Hirotatsu Kishimoto, Akira Kohyama

Materials Science Forum　Vol. 879　p. 1743-1748　2017　Research paper (international conference proceedings)

Influence of friction stir welding conditions on joinability of oxide dispersion strengthened steel / F82H ferritic/martensitic steel joint

Hisashi Serizawa, Masakazu Murakami, Yoshiaki Morisada, Hidetoshi Fujii, Shuhei Nogami, Takuya Nagasaka, Hiroyasu Tanigawa

Nuclear Materials and Energy　Vol. 9　p. 367-371　2016/12/01　Research paper (scientific journal)

Microstructure and mechanical property in heat affected zone (HAZ) in F82H jointed with SUS316L by fiber laser welding

S. Kano, A. Oba, H. L. Yang, Y. Matsukawa, Y. Satoh, H. Serizawa, H. Sakasegawa, H. Tanigawa, H. Abe

Nuclear Materials and Energy　Vol. 9　p. 300-305　2016/12/01　Research paper (scientific journal)

Engineering validation for lithium target facility of the IFMIF under IFMIF/EVEDA project

E. Wakai, T. Kanemura, H. Kondo, Y. Hirakawa, Y. Ito, H. Serizawa, Y. Kawahito, T. Higashi, A. Suzuki, S. Fukada, K. Furuya, K. Esaki, J. Yagi, Y. Tsuji, T. Ito, S. Niitsuma, S. Yoshihashi-Suzuki, K. Watanabe, T. Furukawa, F. Groeschel, G. Micciche, S. Manorri, P. Favuzza, F. S. Nitti, R. Heidinger, T. Terai, H. Horiike, M. Sugimoto, S. Ohira, J. Knaster

Nuclear Materials and Energy　Vol. 9　p. 278-285　2016/12/01　Research paper (scientific journal)

Development of Caulked Joint between Zircaloy and SiC/SiC Composite Tubes By Using Diode Laser

H. Serizawa, M. Tsukamoto, Y. Asakura, J.S. Park, A. Kohyama, H. Motoki, D. Tanigawa, H. Kishimoto

Ceramic Engineering and Science Proceedings　Vol. 37　No. 6　2016/11　Research paper (international conference proceedings)

Prediction of Inherent Strain in Friction Stir Welding by Using A New Coupled Analysis of MPS and FEM

Hisashi Serizawa, Taku Hayami, Fumikazu Miyasaka

Proceedings of 10th International Conference on Trends in Welding Research & 9th International Welding Symposium of Japan Welding Society (9WS)　p. 368-371　2016/10　Research paper (international conference proceedings)

Finite Element Analysis of Deformation in Early Stage of Multi-pass Circumferential Dissimilar Welding of Thick-walled Pipes with Narrow Gap

H. Serizawa, Y. Okuda, H. Murakawa

Welding in the World　Vol. 60　No. 5　p. 1037-1046　2016/08　Research paper (scientific journal)

Development of Joining Method for Zircaloy and SiC/SiC Composite Tubes by Using Fiber Laser

H. Serizawa, Y. Asakura, J.S. Park, H. Kishimoto, A. Kohyama

Ceramic Transactions　Vol. 255　p. 177-184　2016/07　Research paper (scientific journal)

Experimental Assessment of Temperature Distribution in Heat Affected Zone (HAZ) in Dissimilar Joint between 8Cr-2W Steel and SUS316L Fabricated by 4 kW Fiber Laser Welding

S. Kano, A. Oba, H. Yang, Y. Matsukawa, Y. Satoh, H. Serizawa, H. Sakasegawa, H. Tanigawa, H. Abe

Mechanical Engineering Letters　Vol. 2　p. 15-00481(1)-15-00481(9)　2016/05　Research paper (scientific journal)

On the prediction of Fracture mode of cross tension specimen (CTS) by using J-integral

Vol. 21　2016/05

Plastic deformation behavior and bonding strength of an EBW joint between 9Cr-ODS and JLF-1 estimated by symmetric four-point bend tests combined with FEM analysis

Haiying Fu, Takuya Nagasaka, Takeo Muroga, Wenhai Guan, Shuhei Nogami, Hisashi Serizawa, Shaofei Geng, Kiyohiro Yabuuchi, Akihiko Kimura

Fusion Engineering and Design　Vol. 102　p. 88-93　2016/01/01　Research paper (scientific journal)

New Combined Method of MPS and FEM fro Simulating Friction Stir Processing

H. Serizawa, F. Miyasaka

Ceramic Engineering and Science Proceedings　Vol. 36　No. 6　2015/10　Research paper (international conference proceedings)

314 Study on fracture mechanics evaluation of the weld : materials data setting using Vickers hardness and J integral calculus evaluation

AMANO Hijiri, KADOWAKI Satoshi, OKADA Hiroshi, MURAKAWA Hidekazu, SERIZAWA Hisashi, SHIBAHARA Masakazu, TANAKA Satoyuki, CHIBA Kouji

The Computational Mechanics Conference　Vol. 2015　No. 28　p. "314-1"-"314-3"　2015/10

溶接残留応力や温度履歴を考慮した溶接部破壊力学評価ソフトウエアの構築

天野聖, 門脇聖, 岡田裕, 村川英一, 芹澤久, 柴原正和, 田中智行, 千葉晃司

第28回 計算力学講演会(CMD2015)　2015/10

Modifications of grain-boundary structure by friction stir welding in the joint of nano-structured oxide dispersion strengthened ferritic steel and reduced activation martensitic steel

Wentuo Han, Dongsheng Chen, Yoosung Ha, Akihiko Kimura, Hisashi Serizawa, Hidetoshi Fujii, Yoshiaki Morisada

Scripta Materialia　Vol. 105　p. 2-5　2015/08/01　Research paper (scientific journal)

Fast computation based on an iterative substructure method for three-dimensional simulation of multipass welding

Akira Maekawa, Hisashi Serizawa, Hidekazu Murakawa

Journal of Pressure Vessel Technology, Transactions of the ASME　Vol. 137　No. 4　p. 041410-1-041410-11　2015/08/01　Research paper (scientific journal)

Research on Joint Technology of Dissimilar Joint between Reduced Activation Ferritic/Martensitic Steel and Stainless Steel with Fiber Laser

H. Serizawa, D. Mori, H. Ogiwara, H. Mori

Proceedings of the 83rd Laser Materials Processing Conference　p. 13-17　2015/06　Research paper (conference, symposium, etc.)

Finite Element Analysis of Deformation in Early Stage of Multi-pass Circumferential Dissimilar Welding of Thick-walled Pipes with Narrow Gap

H. Serizawa, Y. Okuda, H. Murakawa

68th Annual Assembly of Int. Inst. Welding (IIW)　2015/06　Research paper (international conference proceedings)

溶接施工から破壊力学的強度評価までの一気通貫CAE解析

門脇 聖, 天野 聖, 岡田 裕, 村川 英一, 芹澤 久, 柴原 正和, 田中 智行, 千葉 晃司

計算工学講演会論文集 第20巻　2015/06

Prediction of weld residual stress in a pressurized water reactor pressurizer surge nozzle

Akira Maekawa, Atsushi Kawahara, Hisashi Serizawa, Hidekazu Murakawa

Journal of Pressure Vessel Technology, Transactions of the ASME　Vol. 138　No. 2　p. 021401-1-021401-11　2015/04/01　Research paper (scientific journal)

Weldability of 9Cr-ODS and JLF-1 Steels for Dissimilar Joining with Hot Isostatic Pressing and Electron Beam Welding

H. Fu, T. Nagasaka, T. Muroga, W. Guan, S. Nogami, A. Hasegawa, H. Serizawa

Plasma and Fusion Research　Vol. 10　p. 3405015-1-3405015-4　2015/04　Research paper (scientific journal)

Parameter Selection in Dissimilar Friction Stir Welding of ODS Ferritic Steel and RAFM Steel F82H

Wentuo HAN, Akihiko KIMURA, Dongsheng CHEN, Zhexian ZHANG, Hisashi SERIZAWA, Yoshiaki MORISADA, Hidetoshi FUJII

J. Plasma Fusion Res. SERIES　Vol. 11　p. 65-68　2015/03　Research paper (international conference proceedings)

Development of laser welding technology for fully austenitic stainless steel

Katsutoshi Takano, Norikiyo Koizumi, Hisashi Serizawa, Shuho Tsubota, Yoshinobu Makino

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 33　No. 2　p. 126-132　2015　Research paper (scientific journal)

Numrical Simulation for Friction Stir Welding

F. Miyasaka, H. Serizawa

Journal of the Japan Welding Society　Vol. 84　No. 1　p. 35-38　2015/01

Fast three-dimensional multipass welding simulation using an iterative substructure method

Akira Maekawa, Atsushi Kawahara, Hisashi Serizawa, Hidekazu Murakawa

Journal of Materials Processing Technology　Vol. 215　p. 30-41　2015　Research paper (scientific journal)

Numerical Analysis of Heat Generating Behavior in Friction Stir Welding through Particle Method

T. Hayami, H. Serizawa, F. Miyasaka

Proceedings of National Symposium on Welding Mechanics and Design 2014　p. 357-360　2014/12　Research paper (conference, symposium, etc.)

Prediction Analysis of Weld Residual Stress in A PWR Pressurizer Surge Nozzle

A. Maekawa, A. Kawahara, H. Serizawa, H. Murakawa

Proceedings of National Symposium on Welding Mechanics and Design 2014　p. 273-276　2014/12　Research paper (conference, symposium, etc.)

A Critical Review on Modeling of Fracture Behavior of Ceramic Joints

H. Serizawa, H. Murakawa

Advances in Science and Technology　Vol. 88　p. 121-130　2014/10　Research paper (international conference proceedings)

Effect of Specimen Geometry on Microstructural Fracture Behavior in Nano Composites under HVEM

H. Serizawa, T. Shibayama, H. Murakawa

Ceramic Engineering and Science Proceedings　Vol. 35　No. 2　2014/10　Research paper (international conference proceedings)

Laser Beam Welding for Reduced Activation Ferritic/Martensitic Steel F82H

H. Mori, H. Ogiwara, K. Saida, H. Serizawa, T. Hirose, H. Tanigawa

Materials Science Forum　Vol. 783-786　p. 2771-2776　2014/05　Research paper (scientific journal)

Development of A Combined Method between MPS and FEM for Simulating Friction Stir Welding

H. Serizawa, J. Shimazaki, F. Miyasaka, G. Yoshikawa, H. Murakawa

Materials Science Forum　Vol. 783-786　p. 2531-2536　2014/05　Research paper (scientific journal)

Effects of tool rotation speed on the mechanical properties and microstructure of friction stir welded ODS steel

Kiyohiro Yabuuchi, Naoto Tsuda, Akihiko Kimura, Yoshiaki Morisada, Hidetoshi Fujii, Hisashi Serizawa, Shuhei Nogami, Akira Hasegawa, Takuya Nagasaka

Materials Science and Engineering A　Vol. 595　p. 291-296　2014/02/10　Research paper (scientific journal)

Engineering validation and engineering design of lithium target facility in Ifmif/Eveda project

E. Wakai, H. Kondo, T. Kanemura, T. Furukawa, Y. Hirakawa, K. Watanabe, M. Ida, Y. Ito, S. Niitsuma, Y. Edao, K. Fujishiro, K. Nakaniwa, E. Hoashi, H. Horiike, H. Serizawa, Y. Kawahito, S. Fukada, Y. Sugie, A. Suzuki, J. Yagi, Y. Tsuji, K. Furuya, F. Groeschel, J. Knaster, G. Micchiche, A. Ibarra, R. Heidinger, F. Nitti, M. Sugimoto

Fusion Science and Technology　Vol. 66　No. 1　p. 46-56　2014　Research paper (scientific journal)

Effect of laser beam position on mechanical properties of F82H/SUS316L butt-joint welded by fiber laser

Hisashi Serizawa, Daiki Mori, Hiroyuki Ogiwara, Hiroaki Mori

Fusion Engineering and Design　Vol. 89　No. 7-8　p. 1764-1768　2014　Research paper (international conference proceedings)

Effects of mechanical force on grain structures of friction stir welded oxide dispersion strengthened ferritic steel

Wentuo Han, Akihiko Kimura, Naoto Tsuda, Hisashi Serizawa, Dongsheng Chen, Hwanil Je, Hidetoshi Fujii, Yoosung Ha, Yoshiaki Morisada, Hiroyuki Noto

Journal of Nuclear Materials　Vol. 455　No. 1-3　p. 46-50　2014　Research paper (scientific journal)

FAST SIMULATION FOR MULTI-PASS WELDING PROCESS USING ITERATIVE SUBSTUCTURE METHOD: INVESTIGATION OF OPTIMIZATION AND EFFICIENT COMPUTATION

Akira Maekawa, Atsushi Kawahara, Hisashi Serizawa, Hidekazu Murakawa

ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2014, VOL 6B　2014　Research paper (international conference proceedings)

Basic Numerical Study on Gap Influence of Residual Stress and Distortion during High-Brightness Laser Butt Welding

SERIZAWA Hisashi, MORI Daiki, MURAKAWA Hidekazu

Trans. JWRI　Vol. 42　No. 2　p. 37-43　2013/12　Research paper (bulletin of university, research institution)

Basic Numerical Analysis of Friction Stir Welding with A Combination of MPS and FEM

H. Serizawa, J. Shimazaki, F. Miyasaka, G. Yoshikawa, H. Murakawa

Proceedings of the 1st International Joint Symposium on Joining and Welding　p. 317-324　2013/11　Research paper (international conference proceedings)

Effect of Rotation Speed on Microstructure and Hardness of Friction Stir Welded ODS Ferritic Steel

W.T. Han, N. Tsuda, D.S. Chen, Y. Ha, H. Je, H. Noto, Y. Morisada, H. Serizawa, H. Fujii, K. Yabuuchi, A. Kimura

Proceedings of the 1st International Joint Symposium on Joining and Welding　p. 81-85　2013/11　Research paper (international conference proceedings)

IFMIF: Overview of the validation activities

J. Knaster, F. Arbeiter, P. Cara, P. Favuzza, T. Furukawa, F. Groeschel, R. Heidinger, A. Ibarra, H. Matsumoto, A. Mosnier, H. Serizawa, M. Sugimoto, H. Suzuki, E. Wakai

Nuclear Fusion　Vol. 53　No. 11　2013/11　Research paper (scientific journal)

Numerical Analysis of Microstructural Fracture Behavior in Nano Composites under HVEM

H. Serizawa, T. Shibayama, H. Murakawa

Ceramic Engineering and Science Proceedings　Vol. 34　No. 8　2013/10　Research paper (international conference proceedings)

Weldability of dissimilar joint between F82H and SUS316L under fiber laser welding

Hisashi Serizawa, Daiki Mori, Yuma Shirai, Hiroyuki Ogiwara, Hiroaki Mori

Fusion Engineering and Design　Vol. 88　No. 9-10　p. 2466-2470　2013/10　Research paper (international conference proceedings)

Effect of Gap between Plates on Distortion and Residual Stress during High-Brightness Laser Butt Welding

H. Serizawa, D. Mori, K. Okuda, H. Murakawa

66th Annual Assembly of Int. Inst. Welding (IIW)　2013/09　Research paper (international conference proceedings)

Numerical analysis of deformation in multi-pass circumferential TIG welding with narrow gap

Hisashi Serizawa, Shinichiro Nakamura, Kyosuke Kanbe, Yoshihiro Fujita, Satoru Asai, Hidekazu Murakawa

Welding in the World　Vol. 57　No. 5　p. 615-623　2013/09　Research paper (scientific journal)

Numerical Study of Factors for Generating Inherent Strain in Friction Stir Welding

H. Serizawa, J. Shimazaki, H. Murakawa

Trends in Welding Research 2012　p. 922-929　2013/02　Research paper (international conference proceedings)

Fast computational simulation for multi-pass welding of pipe joint based on iterative substructure method

Akira Maekawa, Atsushi Kawahara, Hisashi Serizawa, Hidekazu Murakawa

Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A　Vol. 79　No. 808　p. 1852-1856　2013　Research paper (scientific journal)

Development of thermal elastic-plastic FEM for line heating with remeshing technique

Hui Huang, Hisashi Serizawa, Jiangchao Wang, Hidekazu Murakawa

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 31　No. 4　p. 134s-137s　2013　Research paper (scientific journal)

Fast finite element analysis of weld residual stress in large-diameter thick-walled stainless steel pipe joints and its experimental validation

Akira Maekawa, Hisashi Serizawa, Keiji Nakacho, Hidekazu Murakawa

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 31　No. 4　p. 129s-133s　2013　Research paper (scientific journal)

Numerical study of local PWHT condition for EB welded joint between first and side walls in ITER-TBM

Hisashi Serizawa, Shinichiro Nakamura, Hiroyasu Tanigawa, Hiroyuki Ogiwara, Hidekazu Murakawa

Journal of Nuclear Materials　Vol. 442　No. 1-3　p. S535-S540　2013　Research paper (scientific journal)

Residual stress study in dissimilar metal welds of a PWR pressurizer surge nozzle: Validation of developed fast analysis method and examination of safe-end length effect

Akira Maekawa, Atsushi Kawahara, Hisashi Serizawa, Hidekazu Murakawa

American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP　Vol. 6　2013　Research paper (international conference proceedings)

Numerical Analysis of the Straightening Process of Thin Plate Structures by Elastic FEM based on the Inherent Strain Method

VEGA Adan, CAMA?O Alexandra, BLANDON Juan, SERIZAWA Hisashi, MA Ninshu, MURAKAWA Hidekazu

Trans. JWRI　Vol. 41　No. 2　p. 61-67　2012/12　Research paper (bulletin of university, research institution)

Joining U.S. NRC International Round Robin for Weld Residual Stress Analysis -Stress Analysis and Validation in PWSCC Mitigation Program-

A. Maekawa, H. Serizawa, H. Murakawa

Journal of the Institute of Nuclear Safety System　Vol. 19　p. 50-64　2012/10

Numerical Analysis of Fracture Behavior in Anisotropic Microstructures

H. Serizawa, S. Tomiyama, T. Hajima, H. Murakawa

Ceramic Engineering and Science Proceedings　Vol. 33　No. 8　2012/09　Research paper (international conference proceedings)

Numerical Analysis of Deformation in Multi-pass Circumferential TIG Welding with Narrow Groove

H. Serizawa, S. Nakamura, K. Kanbe, Y. Fujita, S. Asai, H. Murakawa

65th Annual Assembly of Int. Inst. Welding (IIW)　2012/07　Research paper (international conference proceedings)

FE analysis of hot cracking in welded pipe structure

M. Shibahara, T. Iwamoto, T. Osuki, K. Ogawa, H. Serizawa, H. Murakawa

Proceedings of the International Offshore and Polar Engineering Conference　p. 224-231　2012/06　Research paper (international conference proceedings)

溶接の順序で溶接変形が変わる？の巻

芹澤 久

WE-COMマガジン(日本溶接協会)　Vol. 4　2012/04

Residual Stress Analysis Evaluation in Dissimilar Metal Weld Joint of Ni-based Alloy: Joining a U.S. NRC International Weld Residual Stress Round Robin Program

Maekawa Akira, Kawahara Atsushi, Serizawa Hisashi, Murakawa Hidekazu

Proceedings of Annual / Fall Meetings of Atomic Energy Society of Japan　Vol. 2012s　p. 352-352　2012

Prediction of weld residual stress in a pwr pressurizer surge nozzle: A proposed fast computational 3D analysis method and influence of its heat source model

Akira Maekawa, Atsushi Kawahara, Hisashi Serizawa, Hidekazu Murakawa

American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP　Vol. 6　p. 1033-1044　2012　Research paper (international conference proceedings)

Development of Prediction Technology of Welding Distortion in an Aluminum Motorcycle Frame

F. Matsuda, T. Mizuno, M. Enyama, T. Eguchi, H. Serizawa, H. Murakawa

Journal of Light Metal Welding　Vol. 50　No. 1　p. vi-vii　2012/01

Development of numerical tool for analysis of microstructural fracture behavior in smart & intelligent materials

Hisashi Serizawa, Seigo Tomiyama, Tsuyoshi Hajima, Hidekazu Murakawa

Materials Science Forum　Vol. 706-709　p. 2002-2007　2012　Research paper (international conference proceedings)

Numerical Analysis of Hot Cracking in Welded Pipt Structure

M. Shibahara, T. Iwamoto, T. Osuki, K. Ogawa, H. Serizawa, H. Murakawa

Proceedings of International Seminar on Welding Science and Engineering (WSE2011) & CCWS Seminar 2011　p. 143-144　2011/11　Research paper (international conference proceedings)

Basic Research on Generation Factor of Inherent Strain in Friction Stir Welding

J. Shimazaki, H. Serizawa, H. Murakawa

Proceedings of National Symposium on Welding Mechanics and Design 2011　p. 253-257　2011/11　Research paper (conference, symposium, etc.)

Modeling of Mechanical Behavior of Solidification Cracking During Welding - Proposal of Prediction Model of Solidification Cracking (2nd Report) -

M. Shibahara, T. Iwamoto, T. Osuki, K. Ogawa, H. Serizawa, H. Murakawa

Proceedings of National Symposium on Welding Mechanics and Design 2011　p. 41-48　2011/11　Research paper (conference, symposium, etc.)

Welding Simulation of Large-Diameter Thick-Walled Stainless Steel Pipe Joints - Fast Computation of Residual Stress and Influence of Heat Source Model -

A. Maekawa, H. Serizawa, K. Nakacho, H. Murakawa

Journal of the Institute of Nuclear Safety System　Vol. 18　p. 69-83　2011/10

Effect of mechanical restraint on weldability of reduced activation ferritic/martensitic steel thick plates

Hisashi Serizawa, Shinichiro Nakamura, Manabu Tanaka, Yousuke Kawahito, Hiroyasu Tanigawa, Seiji Katayama

Journal of Nuclear Materials　Vol. 417　No. 1-3　p. 55-58　2011/10/01　Research paper (international conference proceedings)

Development of Numerical Method for Evaluating Microstructural Fracture in Smart Materials

H. Serizawa, T. Hajima, S. Tomiyama, H. Murakawa

Ceramic Engineering and Science Proceedings　Vol. 32　No. 8　p. 133-140　2011/08　Research paper (international conference proceedings)

Prediction of Longitudinal Bending Deformation of Ship Produced by Block Assembly

H. Murakawa, H. Serizawa, T. Uesugi, S. Iwasaki

Proceedings of the Twengy-first (2011) International Offshore and Polar Engineering Conference　Vol. 4　p. 132-137　2011/06　Research paper (international conference proceedings)

Basic Analysis of Microstructural Fracture Behavior in Structural Materials by Using FEM with Interface Element

H. Serizawa, S. Tomiyama, T. Hajima, H. Murakawa

Procedia Engineering　Vol. 10　p. 556-561　2011/06　Research paper (international conference proceedings)

Current Status and Issues in Joining Technology of Reduced Activation Ferritic/Martensitic Steel

T. Hirose, H. Serizawa, H. Kishimoto, H. Ogiwara, H. Fujii, T. Nagasaka, R. Kasada, T. Nozawa, H. Tanigawa, K. Shiba

The Journal of the Japan Society of Plasma Science and Nuclear Fusion Research　Vol. 87　No. 3　p. 172-180　2011/03

Evaluation of Influence of Welding Parameters on Formation of Ductility-Dip Cracking in Multipass Weld Metal of Alloy 690 -Evaluation Technology for Integrity in Repair Welding of Ageing Plants, and for Reliability of Repaired Welds (Part 2)-

H. Murakawa, H. Serizawa

Proceedings of International Symposium on the Ageing Management & Maintenance of Nuclear Power Plants (ISaG2010)　p. 221-229　2011/03　Research paper (international conference proceedings)

Report of “The International Symposium on Visualization in Joining & Welding Science Through Advanced Measurements and Simulation (Visual-JW2010)”

Serizawa Hisashi

Yosetsu Gakkai Shi/Journal of the Japan Welding Society　Vol. 80　No. 2　p. 188-191　2011　Research paper (scientific journal)

Influence of cooling channel in first and side walls on welding residual stress of test blanket module for ITER

S. Nakamura, H. Serizawa, H. Tanigawa, H. Murakawa

Welding in the World　Vol. 55　No. 11-12　p. 56-65　2011　Research paper (scientific journal)

Measurement and numerical analysis of welding residual stress in box structure employed for breeder blanket system of ITER

H. Serizawa, S. Nakamura, H. Tanigawa, T. Hirose, M. Enoeda, H. Murakawa

Welding in the World　Vol. 55　No. 11-12　p. 48-55　2011　Research paper (scientific journal)

Preliminary numerical research of microstructural fracture behavior in metal by using interface element

Seigo Tomiyama, Hisahsi Serizawa, Tsuyoshi Hajima, Hidekazu Murakawa

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 29　No. 3　p. 109s-113s　2011　Research paper (scientific journal)

Prospective design of weld joint between first and side walls in test blanket module for ITER

Shinichiro Nakamura, Hisahsi Serizawa, Hiroyasu Tanigawa, Hidekazu Murakawa

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 29　No. 3　p. 104s-108s　2011　Research paper (scientific journal)

Fast computational residual stress analysis for welded pipe joint based on iterative substructure method

Akira Maekawa, Shigeru Takahashi, Hisashi Serizawa, Hidekazu Murakawa

American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP　Vol. 6　p. 1437-1449　2011　Research paper (international conference proceedings)

Numerical Analysis of Mechanical Restraint on Residual Stress in Thick Plate Welding By Using Electron Beam

H. Serizawa, S. Nakamura, H. Murakawa

Mathematical Modelling of Weld Phenomena 9　p. 415-425　2011/01　Research paper (international conference proceedings)

Preliminary numerical research of microstructural fracture behavior in metal by using interface element

Murakawa Hidekazu, Tomiyama Seigo, Serizawa Hisashi, Hajima Tsuyoshi

Trans. JWRI　Vol. 39　No. 2　p. 235-237　2010/12　Research paper (bulletin of university, research institution)

Prospective design of weld joint between first and side walls in test blanket module for ITER

Shinichiro Nakamura, Hisashi Serizawa, Hiroyasu Tanigawa, Hidekazu Murakawa

Trans. JWRI　Vol. 39　No. 2　p. 232-234　2010/12　Research paper (bulletin of university, research institution)

Efficiency comparison between iterative substructure method and commercial software

Linjie Zhang, Zhang Jianxun, Hisashi Serizawa, Hidekazu Murakawa

Trans. JWRI　Vol. 39　No. 2　p. 185-187　2010/12　Research paper (bulletin of university, research institution)

Application of inherent deformation and interface element to prediction of welding distortion during assembly process

Dean Deng, Hidekazu Murakawa, Ninshu Ma, Hisashi Serizawa

Trans. JWRI　Vol. 39　No. 2　p. 109-111　2010/12　Research paper (bulletin of university, research institution)

Thermal elastic plastic analysis for welding problem of large scale models

Norihiro Tanaka, Atsushi Kawahara, Hisashi Serizawa, Hidekazu Murakawa

Trans. JWRI　Vol. 39　No. 2　p. 79-81　2010/12　Research paper (bulletin of university, research institution)

Packing experiment of breeder pebbles into water cooled solid breeder test blanket module for ITER

Takanori Hirose, Yohji Seki, Hisashi Tanigawa, Hiroyasu Tanigawa, Daigo Tsuru, Mikio Enoeda, Hisashi Serizawa, Hiroto Yamaoka

FUSION ENGINEERING AND DESIGN　Vol. 85　No. 7-9　p. 1426-1429　2010/12　Research paper (scientific journal)

Fast Computable Residual Stress Analysis for Welded Pipe Joint Based on Iterative Substructure Method

A. Maekawa, S. Takahashi, H. Serizawa, H. Murakawa

Journal of the Institute of Nuclear Safety System　Vol. 17　p. 60-74　2010/10

Effect of Various Factors on Interface Formation in Magnetic Pressure Seam Welding

H. Serizawa, I. Shibahara, S. Rashed, H. Murakawa, S. Kumai

Ceramic Engineering and Science Proceedings　Vol. 31　No. 8　p. 175-182　2010/09　Research paper (international conference proceedings)

溶接構造シンポジウム2009 会議録 : クリーンエネルギーを取り巻く新潮流と溶接構造化技術

猪瀬 幸太郎, 萱森 陽一, 川口 忍, 川畑 友弥, 日下 正広, 久保 高宏, 誉田 登, 才田 一幸, 佐藤 統宣, 柴原 正和, 島貫 広志, 芹澤 久, 高澤 孝一, 田川 哲哉, 鷹羽 新二, 平松 秀基, 三上 欣希, 望月 正人, 山下 洋一, 山本 元道

溶接学会誌　Vol. 79　No. 5　p. 534-537　2010/07

Influence of Cooling Channel in First and Side Walls on Welding Residual Stress of Test Blanket Module for ITER

S. Nakamura, H. Serizawa, H. Tanigawa, H. Murakawa

63rd Annual Assembly of Int. Inst. Welding (IIW)　2010/07　Research paper (international conference proceedings)

Measurement and Numerical Analysis of Welding Residual Stress in Box Structure Employed for Breeder Blanket System of ITER

H. Serizawa, S. Nakamura, H. Tanigawa, T. Hirose, M. Enoeda, H. Murakawa

63rd Annual Assembly of Int. Inst. Welding (IIW)　2010/07　Research paper (international conference proceedings)

Numerical Evaluation of Joining Process between Fe and Al under Magnetic Pressure Seam Welding

H. Serizawa, S. Rashed, H. Murakawa, S. Kumai

Proceedings of the 17th International Conference on Computational & Experimental Engineering and Science (ICCES'10)　2010/03　Research paper (international conference proceedings)

FEM Analysis of Joint Interface Formation in Magnetic Pressure Seam Welding

H. Serizawa, I. Shibahara, S. Rashed, H. Murakawa

Materials Science Forum　Vol. 638-642　p. 2166-2171　2010/01　Research paper (scientific journal)

Effect of Mechanical Restraint Factor on Weldability of Reduced Activation Ferritic Steel

Summary Report of Joint Research in Japan on BA DEMO R&D Activity 2008　p. 19-30　2010

Mechanism and Effect of Stress-induced Transformation on Improvement of Fracture Toughness

MURAKAWA Hidekazu, SERIZAWA Hisashi, TSUJIMOTO Takeaki, TOMIYAMA Seigo

Trans. JWRI　Vol. 38　No. 2　p. 71-78　2009/12　Research paper (bulletin of university, research institution)

Mechanism and Effect of Stress-Induced Transformation on Improvement of Fracture Toughness

H. Murakawa, H. Serizawa, T. Tsujimoto, S. Tomiyama

Proceedings of National Symposium on Welding Mechanics and Design 2009　p. 605-612　2009/11　Research paper (conference, symposium, etc.)

Basic Research on Various Factor Influences of Materials Properties on Fracture Behavior of Metals

T. Hajima, S. Tomiyama, H. Serizawa, H. Murakawa

Proceedings of National Symposium on Welding Mechanics and Design 2009　p. 589-592　2009/11　Research paper (conference, symposium, etc.)

Effect of Mechanical Restraint on Residual Stress in Thick Plate Welding by Using Electron Beam

H. Serizawa, S. Nakamura, H. Tanigawa, H. Murakawa

Proceedings of National Symposium on Welding Mechanics and Design 2009　p. 141-147　2009/11　Research paper (conference, symposium, etc.)

Consideration of Welding Sequence to Reduce Welding Distortion of Car Carrier Structures during Block Assembly

Rashed Sherif, Satoh Shinji, Serizawa Hisashi, Murakawa Hidekazu

Proceedings of International Conference on Welding Science and Engineering, 2009　p. 189-199　2009/11　Research paper (international conference proceedings)

Study of welding inherent deformations in thin plates based on finite element analysis using iterative substructure method

R. Wang, J. Zhang, H.Serizawa, H. Murakawa

Materials & Design　Vol. 30　p. 3474-3481　2009/10　Research paper (scientific journal)

Basic Study of Joint Interface Formation in Magnetic Pressure Seam Welding

H. Serizawa, I. Shibahara, S. Rashed, H. Murakawa, M. Watanabe, S. Kumai

Ceramic Engineering and Science Proceedings　Vol. 30　No. 8　p. 121-130　2009/09　Research paper (international conference proceedings)

Numerical Study of Joining Process in Magnetic Pressure Seam Welding

SERIZAWA Hisashi, SHIBAHARA Isao, RASHED Sherif, MURAKAWA Hidekazu

Trans. JWRI　Vol. 38　No. 1　p. 63-68　2009/09　Research paper (bulletin of university, research institution)

Prediction and Control Methods to Reduce Distortion of Deck Panels Produced during Block Assembly of Car Carrier

Y. Tajima, S. Rashed, H. Serizawa, H. Murakawa, Y. Okumoto, K. Akiyoshi

Proceedings of the Nineteenth (2009) International Offshore and Polar Engineering Conference　Vol. 4　p. 779-786　2009/06　Research paper (international conference proceedings)

Development of Hierarchical Multi-Grid Method and Its Application to the Iterative Substructure Method

S. Itoh, M. Shibahara, H. Serizawa, H. Murakawa

Proceedings of the Nineteenth (2009) International Offshore and Polar Engineering Conference　Vol. 4　p. 700-705　2009/06　Research paper (international conference proceedings)

Welding distortion investigation in fillet welded joint and structure based on iterative substructure method

R. Wang, J.X. Zhang, C. Liu, H.Serizawa, H. Murakawa

Science and Technology of Welding and Joining　Vol. 14　No. 5　p. 396-403　2009/06　Research paper (scientific journal)

Investigation of Inherent Deformation in Fillet Welded Thin Plate T-joints Based on Iterative Substructure and Inverse Analysis Method

R. Wang, J. Zhang, H.Serizawa, H. Murakawa

Computer Modeling in Engineering and Sciences　Vol. 44　No. 1　p. 97-113　2009/06　Research paper (scientific journal)

Prediction of Pear-shaped Bead Cracking Under Full Penetration Welding of T-Joints Using Temperature Dependent Interface Element

M. Shibahara, S. Ito, K. Nakata, S. Takaba, H. Serizawa, K. Masaoka, H. Murakawa

Quarterly Journal of the Japan Welding Society　Vol. 27　No. 1　p. 73-80　2009/02　Research paper (scientific journal)

Prediction of hot cracks of T-joints in full-penetration welding process

Masakazu Shibahara, Hayato Nagaki, Shinji Takaba, Hisashi Serizawa, Hidekazu Murakawa

Welding in the World　Vol. 53　No. 11-12　p. R312-R321　2009　Research paper (scientific journal)

Evaluation of residual stress distribution in austenitic stainless steel pipe butt-welded joint

Akira Maekawa, Michiyasu Noda, Shigeru Takahashi, Toru Oumaya, Hisashi Serizawa, Hidekazu Murakawa

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 27　No. 2　p. 240s-244s　2009　Research paper (scientific journal)

Prediction of welding distortion in a part of motorcycle using inherent deformations obtained from inverse analysis for aluminum alloy welded joints

H. Serizawa, T. Yamamoto, H. Murakawa, T. Mizuno, M. Enyama, F. Matsuda

ASM Proceedings of the International Conference: Trends in Welding Research　p. 774-780　2009　Research paper (international conference proceedings)

Development of Prediction Technology of Welding Distortion in an Aluminum Motorcycle Frame with Inherent Strain Method

F. Matsuda, T. Mizuno, M. Enyama, T. Takaki, H. Murakawa, H. Serizawa

Suzuki Technical Review　Vol. 35　p. 18-22　2009

Development of 3D finite element method for hot cracking using interface element and its application for pear-shaped bead cracking under narrow gap welding

Masakazu Shibahara, Shinsuke Ito, Hisashi Serizawa, Koji Masaoka, Hidekazu Murakawa

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 27　No. 1　p. 81-88　2009　Research paper (scientific journal)

Development of a New Computational Method for Solving Inhomogeneous and Ultra Large Scale Model

H. Serizawa, A. Kawahara, S. Itoh, H. Murakawa

Ceramic Engineering and Science Proceedings　Vol. 29　No. 3　p. 173-179　2008/12　Research paper (international conference proceedings)

Technical issues of reduced activation ferritic/martensitic steels for fabrication of ITER test blanket modules

H. Tanigawa, T. Hirose, K. Shiba, R. Kasada, E. Wakai, H. Serizawa, Y. Kawahito, S. Jitsukawa, A. Kimura, Y. Kohno, A. Kohyama, S. Katayama, H. Mori, K. Nishimoto, R. L. Klueh, M. A. Sokolov, R. E. Stoller, S. J. Zinkle

Fusion Engineering and Design　Vol. 83　No. 10-12　p. 1471-1476　2008/12　Research paper (scientific journal)

Arrest Analysis of Propagating Brittle Crack in Welded Structure

H. Murakawa, H. Serizawa

Proceedings of International Symposium on Structures under Earthquake, Impact, and Blast Loading 2008　p. 67-71　2008/10　Research paper (international conference proceedings)

Prediction of Welding Distortion by 3D Elastic FEM Using Inherent Strain Estimated Through Inverse Analysis

I. Chimura, H. Serizawa, H. Murakawa

Proceedings of the 22nd Asian - Pacific Technical Exchange and Advisory Meeting on Marine Structures　p. 446-453　2008/10　Research paper (international conference proceedings)

Effect of Deck Welding Sequence on Panel Buckling and Welding Deformation During Block Assembly of Car Carriers

Y. Tajima, S. Rashed, Y. Okumoto, S. Sasaki, H. Serizawa, H. Murakawa

Proceedings of the 22nd Asian - Pacific Technical Exchange and Advisory Meeting on Marine Structures　p. 437-445　2008/10　Research paper (international conference proceedings)

Study on Welding Inherent Deformations in Welded Structural Materials

WANG Rui, RASHED Sherif, SERIZAWA Hisashi, MURAKAWA Hidekazu, ZHANG Jianxuna

Trans. JWRI　Vol. 37　No. 1　p. 91-100　2008/09　Research paper (bulletin of university, research institution)

Numerical and Experimental Investigations on Welding Deformation

WANG Rui, RASHED Sherif, SERIZAWA Hisashi, MURAKAWA Hidekazu, ZHANG Jianxuna

Trans. JWRI　Vol. 37　No. 1　p. 79-90　2008/09　Research paper (bulletin of university, research institution)

Mechanism of Welding Distortion and Prediction of Welding Deformation by FEM

H. Serizawa

Textbook for Summer School of Welding Engineering　p. 159-182　2008/07

Prediction of Hot Crack of T-Joints in Full Penetration Welding Process

M. Shibahara, H. Nagaki, S. Takaba, O. Yasuda, H. Serizawa, H. Murakawa

61st Annual Assembly of Int. Inst. Welding (IIW)　2008/07　Research paper (international conference proceedings)

Numerical Study on the Effectiveness of Fixture and Pre-strain for Reduction of Welding Distortion

L. Zhang, J. X. Zhang, W. Liang, H. Serizawa, H. Murakawa

Materials Science Forum　Vol. 580-582　p. 401-404　2008/06　Research paper (scientific journal)

Prediction of welding distortion by simulation method for large scale welding problem

Hiroyasu Nishikawa, Hisashi Serizawa, Hidekazu Murakawa

Journal of Materials Processing Technology　Vol. 18　No. 1　p. 15-22　2008/04

Preliminary Study on Influence of Microstructure upon Ductility of Duplex High Strength Steel

H. Murakawa, H. Serizawa, K. Katayama

Proceedings of the 15th International Conference on Computational & Experimental Engineering and Science (ICCES'08)　p. 1664-1669　2008/03　Research paper (international conference proceedings)

Analysis and Prediction of the Multi-Heating Lines Effect on Plate Forming by Line Heating

A. Vega, S. Rashed, I. Chimura, H. Serizawa, H. Murakawa

Proceedings of the 15th International Conference on Computational & Experimental Engineering and Science (ICCES'08)　p. 633-633　2008/03　Research paper (international conference proceedings)

Hierarchical Multi-Grid Method for Ultra Large Scale Problem Based on Variational Theorem

S. Itoh, K. Taguchi, Y. Umemoto, H. Serizawa, H. Murakawa

Proceedings of the 15th International Conference on Computational & Experimental Engineering and Science (ICCES'08)　p. 49-55　2008/03　Research paper (international conference proceedings)

Weldability of Reduced Activation Ferritic/Martensitic Steel under Ultra Power Density Fiber Laser Welding

H. Serizawa, Y. Kawahito, H. Ogiwara, H. Tanigawa, S. Katayama

Proceedings of the 13th International Conference on Fusion Reactor Materials　2007/12　Research paper (international conference proceedings)

Simple Finite Element Model to Study Influence of Microstructure upon Ductility of Duplex High Strength Steel

H. Murakawa, H. Serizawa, K. Katayama

Trans. JWRI　Vol. 36　No. 2　p. 67-71　2007/12　Research paper (bulletin of university, research institution)

Influence of Various Factors on Distortion of Pipes under Butt and Fillet Welding

S. Itoh, M. Sengel, M. Shibahara, H. Serizawa, H. Murakawa

Mathematical Modelling of Welding Phenomena　Vol. 8　p. 1141-1154　2007/12　Research paper (scientific journal)

Parametric studies of welding distortion in fillet welded structure based on FEA using iterative substructure method

L. J. Zhang, J. X. Zhang, H. Serizawa, H. Murakawa

Science and Technology of Welding and Joining　Vol. 12　No. 8　p. 703-707　2007/11　Research paper (scientific journal)

Effect of Residual Stress on Fracture Behavior in Mechanical Test for Evaluating Shear Strength of Ceramic Composite Joint

H. Serizawa, K. Katayama, C. A. Lewinsohn, M. Singh, H. Murakawa

Ceramic Engineering and Science Proceedings　Vol. 28　No. 2　p. 503-511　2007/11　Research paper (scientific journal)

Study on the Effectiveness of Fixture and Pre-strain for Reduction of Welding Distortion

L. Zhang, J. Zhang, S. Itoh, H. Serizawa, H. Murakawa

Proceeding of 2007 International Forum on Welding Science and Engineering　p. 202-207　2007/10　Research paper (international conference proceedings)

Prediction of Welding Distortion by 3D Elastic FEM Using Inherent Strain

I. Chimura, H. Serizawa, H. Murakawa

Proceeding of 2007 International Forum on Welding Science and Engineering　p. 173-178　2007/10　Research paper (international conference proceedings)

Hierarchical Multi-Grid Method for Ultra Large Scale Computation

H. Murakawa, H. Serizawa, S. Itoh

Proceeding of 2007 International Forum on Welding Science and Engineering　p. 155-159　2007/10　Research paper (international conference proceedings)

Numerical Investigation on Welding Residual Stress in 2.25Cr-1Mo Steel Pipes

DENG Dean, KIYOSHIMA Shoichi, SERIZAWA Hisashi, MURAKAWA Hidekazu, HORII Yukihiko

Trans. JWRI　Vol. 36　No. 1　p. 73-90　2007/09　Research paper (bulletin of university, research institution)

Influential Factors Affecting Inherent Deformation during Plate Forming by Line Heating (Report 1) - The Effect of Plate Size and Edge Effect-

VEGA Adan, RASHED Sherif, SERIZAWA Hisashi, MURAKAWA Hidekazu

Trans. JWRI　Vol. 36　No. 1　p. 57-64　2007/09　Research paper (bulletin of university, research institution)

Numerical analysis of mechanical testing for evaluating shear strength of SiC/SiC composite joints

H. Serizawa, D. Fujita, C. A. Lewinsohn, M. Singh, H. Murakawa

Journal of Nuclear Materials　Vol. 367-370　p. 1223-1227　2007/08/01　Research paper (scientific journal)

溶接変形の生成メカニズムと数値解析による予測技術

芹澤 久

平成19年度溶接工学夏季大学教材　p. 37-60　2007/07

Exploitation Method of Large Scale High-Speed Computer in Analysis of Welding Problem

H. Serizawa

Journal of the Japan Welding Society　Vol. 76　No. 5　p. 427-427　2007/07

Evaluation of Welding Distortion and Residual Stress

H. Serizawa

Journal of the Japan Welding Society　Vol. 76　No. 5　p. 393-395　2007/07

Influence of Geometry and Welding Procedures on Welding Deformation of Stiffened Plates

S. Itoh, K. Nakata, I. Chimura, H. Serizawa, H. Murakawa

Proceedings of the Seventeenth (2007) International Offshore and Polar Engineering Conference　Vol. 4　p. 3408-3413　2007/07　Research paper (scientific journal)

3D Finite Element Analysis on Influence of Various Factors for Reducing Welding Distortion of Fillet Welded Structures

L. Zhang, H. Serizawa, H. Murakawa

60th Annual Assembly of Int. Inst. Welding (IIW)　2007/07　Research paper (international conference proceedings)

Stress Analysis of Geometrically Complex and Ultra Large Scale Model by Fractal Multi-Grid Method

H. Murakawa, H. Serizawa, M. Tejima, K. Taguchi, S. Itoh

Characterization and Control of Interfaces for High Quality Advanced Materials II, Ceramic Transactions　Vol. 198　p. 21-26　2007/07　Research paper (scientific journal)

Numerical Analysis of Mechanical Test Methods for Evaluating Shear Strength of Joint By Using Interface Element

H. Serizawa, K. Katayama, C. A. Lewinsohn, M. Singh, H. Murakawa

Key Engineering Materials　Vol. 345　p. 1489-1492　2007/05　Research paper (scientific journal)

Actual Application of FEM to Analysis of Large Scale Mechanical Problem in Welding

H. Nishikawa, H. Serizawa, H. Murakawa

Science and Technology of Welding and Joining　Vol. 12　No. 2　p. 147-152　2007/03　Research paper (scientific journal)

Fractal Multi-Grid Method for Ultra Large Problems Based on Hybrid Variational Principle

H. Murakawa, K. Taguchi, M. Shibahara, H. Serizawa

Proceedings of the 2007 International Conference on Computational & Experimental Engineering and Science　p. 1902-1907　2007/01　Research paper (international conference proceedings)

Numerical Analysis of Test Methods for Evaluating Shear Strength of Ceramic Composite Joints Using Interface Element

H. Serizawa, C. A. Lewinsohn, M. Singh, H. Murakawa

Materials Science Forum　Vol. 539　p. 2143-2148　2007/01　Research paper (scientific journal)

Estimation of Welding Distortion Using FEM for Analysis of Large Scale Mechanical Problems in Welding

H. Nishikawa, H. Serizawa, H. Murakawa

Welding Technology　Vol. 54　No. 12　p. 80-86　2006/12

Finite Element Analysis of Mechanical Test Methods for Evaluating Shear Strength of Ceramic Composite Joints Using Interface Element

H. Serizawa, D. Fujita, C. A. Lewinsohn, M. Singh, H. Murakawa

Ceramic Engineering and Science Proceedings　Vol. 27　No. 2　p. 115-124　2006/11　Research paper (scientific journal)

Speedup Examination of FEM for Analysis of Large Scale Mechanical Problems in Welding

H. Nishikawa, H. Serizawa, H. Murakawa

Proceedings of National Symposium on Welding Mechanics and Design 2006　Vol. 2　p. 629-636　2006/11　Research paper (conference, symposium, etc.)

Thermal-Elastic-Plastic Simulation to Evaluate Effectiveness of Fixture and Pre-strain for Reduction of Welding Distortion

L. Zhang, H. Murakawa, H. Serizawa, Y. Terasaka

Proceedings of National Symposium on Welding Mechanics and Design 2006　Vol. 2　p. 569-575　2006/11　Research paper (conference, symposium, etc.)

Prediction of Pear-shaped Bead Cracking of T-Joints in Full Penetration Welding Using Temperature Dependent Interface Element

M. Shibahara, Y. Noda, K. Masaoka, H. Nagaki, O. Yasuda, S. Takaba, H. Serizawa, H. Murakawa

Proceedings of National Symposium on Welding Mechanics and Design 2006　Vol. 1　p. 287-294　2006/11　Research paper (conference, symposium, etc.)

Numerical Study on Edge Effect in Transverse Shrinkage under Line Heating

A. Vega, W. Liang, H. Serizawa, H. Murakawa

Proceedings of the 20th Asian Technical Exchange and Advisory Meeting on Marine Structures (TEAM 2006)　p. 283-290　2006/10　Research paper (international conference proceedings)

Finite Element Analysis of Single Lap Joined Ceramic Composites by Using An Interface Element

H. Serizawa, M. Singh, H. Murakawa

Transactions of JWRI　Vol. 35　No. 1　p. 83-88　2006/09　Research paper (bulletin of university, research institution)

Fractal Multi-Grid Method for Ultra Large Scale Mechanical and Thermal Simulations

H. Murakawa, H. Serizawa, M. Tejima, K. Taguchi

Transactions of JWRI　Vol. 35　No. 1　p. 71-75　2006/09　Research paper (bulletin of university, research institution)

Exploitation Method of Large Scale High-Speed Computer in Analysis of Welding Problem

H. Serizawa

Journal of the Japan Welding Society　Vol. 75　No. 5　p. 415-415　2006/07

Actual Application of Large-scaled FEM for Analysis of Mechanical Problems in Welding

H. Nishikawa, H. Serizawa, H. Murakawa

Quarterly Journal of the Japan Welding Society　Vol. 24　No. 2　p. 168-173　2006/05　Research paper (scientific journal)

Japanese Activity on SiC/SiC and Related Technology R & D for Fusion

A. Kohyama, T. Hinoki, J.S. Park, H. Kishimoto, A. Hasegawa, T. Shibayama, H. Tanigawa, H. Serizawa

7th IEA International Workshop on SiC/SiC composites for Fusion and Advanced Fission Applications Plenary Meeting，Petten, the Netherlands，2006.9.18–20　2006

Development of Large-scaled FEM for Analysis of Mechanical Problems in Welding

H. Nishikawa, H. Serizawa, H. Murakawa

Journal of the Japan Society of Naval Architects and Ocean Engineers　Vol. 1　No. 2　p. 379-385　2005/12　Research paper (scientific journal)

Finite Element Analysis of SiC/SiC Composite Joints By Using A New Interface Potential

H. Serizawa, C. A. Lewinsohn, H. Murakawa

Novel Materials Processing by Advanced Electromagnetic Energy Sources (MAPEES'04), Proceedings of the International Symposium on Novel Materials Processing by Advanced Electoromagnetic Energy Sources　p. 385-388　2005/12　Research paper (international conference proceedings)

Fractal Multi-Grid Method for Ultra Large Scale FE Computation

H. Murakawa, M. Tejima, S. Itoh, H. Serizawa, M. Shibahara

Proceedings of the 19th Asian Technical Exchange and Advisory Meeting on Marine Structures　p. 216-223　2005/12　Research paper (international conference proceedings)

Temperature Dependent Interface Element for Predicting Pear-shaped Bead Cracking under Narrow Gap Welding

M. Shibahara, S. Itoh, H. Serizawa, K. Masaoka, H. Murakawa

Proceedings of the 19th Asian Technical Exchange and Advisory Meeting on Marine Structures　p. 208-215　2005/12　Research paper (international conference proceedings)

Simulation of Multi-pass Welding Using Iterative Substructure Method

S. Itoh, T. Tsuda, H. Serizawa, H. Murakawa

Proceedings of the 19th Asian Technical Exchange and Advisory Meeting on Marine Structures　p. 200-207　2005/12　Research paper (international conference proceedings)

Fast Computational Scheme for Large Scale Nonlinear Transient Problems in Welding Mechanics

H. Murakawa, H. Serizawa, M. Shibahara, S. Itoh

Advances in Computational & Experimental Engineering and Sciences 2005, Proceedings of the 2005 International Conference on Computational & Experimental Engineering and Sciences (ICCES'05)　Vol. 2　2005/12　Research paper (international conference proceedings)

Ultra Large Scale FE Computation Using Fractal Multi-Grid Method

H. Murakawa, M. Tejima, S. Itoh, H. Serizawa, M. Shibahara

Advances in Computational & Experimental Engineering and Sciences 2005, Proceedings of the 2005 International Conference on Computational & Experimental Engineering and Sciences (ICCES'05)　Vol. 2　p. 228-233　2005/12　Research paper (international conference proceedings)

Prediction of Hot Cracking Using Temperature Dependent Interface Element

M. Shibahara, S. Itoh, H. Serizawa, K. Masaoka, H. Murakawa

Advances in Computational & Experimental Engineering and Sciences 2005, Proceedings of the 2005 International Conference on Computational & Experimental Engineering and Sciences (ICCES'05)　Vol. 2　p. 144-149　2005/12　Research paper (international conference proceedings)

Development of 3-Dimensional High-Speed FEM for Welding Problems

H. Serizawa, S. Itoh, T. Tsuda, H. Nishikawa, M. Shibahara, H. Murakawa

Proceedings of the International Conference on Welding Science and Engineering, 2005 (WSE'05)　p. 240-246　2005/10　Research paper (international conference proceedings)

Prediction of Pear-shaped Bead Cracking under Narrow Gap Welding Using 3D Temperature Dependent Interface Element

M. Shibahara, S. Itoh, K. Masaoka, H. Serizawa, H. Murakawa

Proceedings of the International Conference on Welding Science and Engineering, 2005 (WSE'05)　2005/10　Research paper (international conference proceedings)

Effect of Fabrication Process on Internal Friction and Elastic Modulus of SiC/SiC Composites

H. Serizawa, S. Sato, H. Araki, T. Noda, A. Kohyama

Transactions of JWRI　Vol. 34　No. 1　p. 125-130　2005/09　Research paper (bulletin of university, research institution)

Fractal Multi-Grid Method for Ultra Large Scale Mechanical and Thermal Simulations

H. Murakawa, H. Serizawa, M. Tejima, K. Taguchi

Transactions of JWRI　Vol. 34　No. 1　p. 107-112　2005/09　Research paper (bulletin of university, research institution)

Numerical Analysis of Single Lap Jointed Ceramic Composite Subjected to Tensile Loading

D. Fujita, H. Serizawa, M. Singh, H. Murakawa

Ceramic Engineering and Science Proceedings　Vol. 26　No. 2　p. 417-424　2005/08　Research paper (scientific journal)

Numerical Prediction of Welding Hot Cracking Using Three-Dimensional FEM with Temperature Depedent Interface Element

M. Shibahara, S. Itoh, H. Serizawa, H. Murakawa

Welding in the World, Journal of the International of Welding　Vol. 49　No. 11/12/2020　p. 50-57　2005/07　Research paper (scientific journal)

Evaluation of Welding Distortion and Residual Stress

H. Serizawa

Journal of the Japan Welding Society　Vol. 74　No. 5　p. 106-108　2005/07

Numerical Prediction of Welding Hot Cracking Using Three-Dimensional FEM with Temperature Depedent Interface Element

M. Shibahara, S. Itoh, H. Serizawa, H. Murakawa

The 58th Annual Assembly of the International Institute of Welding, Commision X, IIW Doc. X-1591-2005　2005/07　Research paper (international conference proceedings)

3-Dimensional High-Speed FEM for Thermal Elastic Plastic Welding Problems

H. Nishikawa, I. Oda, S. Ito, M. Shibahara, H. Serizawa, H. Murakawa

Proceedings of 4th German-Japanese Seminar - Materials, Processes and Components -　2005/07　Research paper (international conference proceedings)

Evaluation of Welding Distortion and Residual Stress

H. Serizawa

Journal of the Japan Welding Society　Vol. 82　No. 5　p. 408-411　2005/07

Finite Element Simulation of Pear-shaped Bead Cracking in Narrow Gap Welding Using Temperature Dependent Interface Element

M. Shibahara, H. Serizawa, H. Murakawa, T. Nakamura, K. Hiraoka

Mathematical Modeling of Weld Phenomena 7　p. 573-587　2005/06　Research paper (scientific journal)

Development of Three Dimensional FEM Using Temperature Dependent Interface Element for Predicting Pear-shaped Bead Cracking under Narrow Gap Welding

M. Shibahara, S. Itoh, H. Serizawa, H. Murakawa, T. Nakamura

Proceedings of the 15th International Offshore and Polar Engineering Conference　Vol. 4　p. 61-68　2005/06　Research paper (scientific journal)

Prediction of Welding Hot Cracking using Temperature Depedent Interface Element - Modelling on Interfaces -

H. Murakawa, H. Serizawa, M. Shibahara

Mathematical Modeling of Weld Phenomena 7　p. 539-554　2005/06　Research paper (scientific journal)

Computational Welding Mechanics for Practical Applications

H. Murakawa, H. Serizawa, M. Shibahara

The Proceedings of International Workshop on Development and Advancement of Computational Mechanics　p. 14-25　2005/04　Research paper (international conference proceedings)

329 Development of Large-scaled FEM for Analysis of Mechanical Problems in Welding

NISIKAWA Hiroyasu, ODA Isamu, SERIZAWA Hisashi, MURAKAWA Hidekazu

Pre-Prints of the National Meeting of JWS　No. 76　p. 152-153　2005/03/22

Iterative Substructure Method for Fast Computation of Thermal Elastic Plastic Welding Problems

H. Murakawa, I. Oda, S. Ito, H. Serizawa, M. Shibahara, H. Nishikawa

Journal of the Kansai Society of Naval Architects, Japan　Vol. 243　No. 243　p. 67-70　2005/03　Research paper (scientific journal)

High-strength sic matrix production with polymeric techniques

Masaki Kotani, Akira Kohyama, Yutai Katoh, Takahiro Inoue, Kiyohito Okamura, Hisashi Serizawa

Novel Materials Processing by Advanced Electromagnetic Energy Sources　p. 357-360　2005　Part of collection (book)

Evaluation of fracture behavior of ceramic composite joints by using a new interface potential

Hisashi Serizawa, Charles A. Lewinsohn, Mrityunjay Singh, Hidekazu Murakawa

Materials Science Forum　Vol. 502　p. 69-74　2005　Research paper (international conference proceedings)

Numerical Simulation of Fracture Behavior of Ceramic Composite Joints By Using A Combined Interface Potential

H. Serizawa, C.A. Lewinsohn, M. Singh, H. Murakawa

Transactions of JWRI　Vol. 33　No. 2　p. 181-185　2004/12　Research paper (bulletin of university, research institution)

Development of High-speed and High-precision FEM for Analysis of Mechanical Problems in Welding

H. Nishikawa, I. Oda, H. Serizawa, H. Murakawa

Transactions of JWRI　Vol. 33　No. 2　p. 161-166　2004/12　Research paper (bulletin of university, research institution)

Effect of Fabrication Process on Internal Friction of SiC/SiC Composites

H. Serizawa, S. Sato, H. Araki, T. Noda, A. Kohyama

Ceramic Engineering and Science Proceedings　Vol. 25　No. 4　p. 59-64　2004/12　Research paper (scientific journal)

FEM Analysis for Ductility-Dip Cracking Under Multi-Pass Welding

M. Shibahara, H. Serizawa, H. Murakawa, K. Saida, K. Nishimoto, M. Kameyama

Proceedins of the Welding Structure Symposium 2004　p. 445-452　2004/11　Research paper (conference, symposium, etc.)

FE Analysis for Pear-shaped Bead Cracking under Narrow Gap Welding and Optimization of Welding Condition for Crack Free Weld

M. Shibahara, W. Yanming, H. Serizawa, H. Murakawa, S. Itoh, T. Nakamura, K. Hiraoka

Proceedins of the Welding Structure Symposium 2004　p. 437-444　2004/11　Research paper (conference, symposium, etc.)

Influence of Welding Sequence on Welding Distortion of Thin Plate Structure

D. Deng, H. Serizawa, H. Murakawa

Proceedins of the Welding Structure Symposium 2004　p. 425-432　2004/11　Research paper (conference, symposium, etc.)

High-speed and High-precision FEM Analysis of Mechanical Problems in Welding

H. Nishikawa, I. Oda, H. Serizawa, H. Murakawa

Proceedins of the Welding Structure Symposium 2004　p. 179-184　2004/11　Research paper (conference, symposium, etc.)

Measurement of Inherent Deformation in Typical Welded Joints Using Inverse Analysis and Discussion on the Effectiveness of their Results

W. Liang, S. Sone, H. Serizawa, H. Murakawa

Proceedins of the Welding Structure Symposium 2004　p. 151-155　2004/11　Research paper (conference, symposium, etc.)

Measurement of Inherent Deformations in Typical Weld Joints Using Inverse Analysis (Part 1) - Inherent Deformation of Bead on Welding

W. Liang, S. Sone, M. Tejima, H. Serizawa, H. Murakawa

Transactions of JWRI　Vol. 33　No. 1　p. 45-51　2004/09　Research paper (bulletin of university, research institution)

Prediction of Welding Distortion during the Assembly Process of Thin Plate Structures (2nd Report) - Influence of Welding Sequence on Welding Distortion -

D. Deng, H. Serizawa, H. Murakawa

Journal of the Kansai Society of Naval Architects, Japan　Vol. 242　No. 242　p. 97-104　2004/09　Research paper (scientific journal)

A Simple Measuring Method of Welding Inherent Deformation Using Inverse Analysis

W. Liang, S. Sone, H. Serizawa, H. Murakawa

Journal of the Kansai Society of Naval Architects, Japan　Vol. 242　No. 242　p. 89-96　2004/09　Research paper (scientific journal)

Finite Element Analysis of Ceramic Composite Joints by Using a New Interface Potential

H. Serizawa, H. Murakawa, M. Singh, C.A. Lewinsohn

High Temperature Ceramic Matrix Composites 5　p. 451-456　2004/09　Research paper (scientific journal)

Development of New Interface Potential for Evaluating Strength of SiC/SiC Composite Joint

H. Serizawa, C.A. Lewinsohn, H. Murakawa

Journal of Nuclear Materials　Vol. 329-333　p. 492-496　2004/08　Research paper (scientific journal)

Evaluation of Welding Distortion and Residual Stress

H. Serizawa

Journal of the Japan Welding Society　Vol. 73　No. 5　p. 88-89　2004/07

Finite Element Simulation for Welding Hot Cracking Using Temperature Dependent Interface Element - Effect of Various Factors on Pear-shaped Bead Cracking in Narrow Gap Welding -

M. Shibahara, H. Serizawa, H. Murakawa

Proceedings of the Finnish-German- Japanese Joint International Seminar on Mechanical and Metallurgical Approaches to New Joining Process　p. 213-220　2004/07　Research paper (international conference proceedings)

Numerical Simulation of Pear-shaped Bead Cracking in Narrow Gap Welding Using Temperature Dependent Interface Element

M. Shibahara, H. Serizawa, H. Murakawa, T. Nakamura, K. Hiraoka

Proceedings of the IIW International Conference on Technical Trends and Future Prospectives of Welding Technology for Transportation, Land, Sea, Air and Space　2004/07　Research paper (international conference proceedings)

A Simple Measuring Method of Welding Inherent Deformation Using Inverse Analysis

W. Liang, S. Sone, H. Serizawa, H. Murakawa

Proceedings of the IIW International Conference on Technical Trends and Future Prospectives of Welding Technology for Transportation, Land, Sea, Air and Space　2004/07　Research paper (international conference proceedings)

Evaluation of Strength of SiC/SiC Composite Joint Using New Interface Potential

H. Serizawa, C.A. Lewinsohn, H. Murakawa

Composites Technologies for 2020, Proceedings of the Fourth Asian-Australasian Conference on Composite Materials (ACCM-4)　p. 603-608　2004/07　Research paper (scientific journal)

A Simple Measuring Method of Welding Inherent Deformation Using Inverse Analysis

W. Liang, S. Sone, H. Serizawa, H. Murakawa

Proceedings of the 14th International Offshore and Polar Engineering Conference　Vol. 4　p. 148-153　2004/05　Research paper (scientific journal)

Three-dimensional Thermal-elastic-plastic FEM Analysis for Predicting Residual Stress and Deformation under Multi-pass Welding

H. Nishikawa, I. Oda, M. Shibahara, H. Serizawa, H. Murakawa

Proceedings of the 14th International Offshore and Polar Engineering Conference　Vol. 4　p. 126-132　2004/05　Research paper (scientific journal)

FEM Analysis for Ductility-Dip Cracking Under Multi-Pass Welding

M. Shibahara, S. Sone, H. Serizawa, H. Murakawa, K. Nishimoto, K. Saida, M. Kameyama

Journal of the Kansai Society of Naval Architects, Japan　Vol. 241　No. 241　p. 177-186　2004/03　Research paper (scientific journal)

Finite Element Analysis for Hot Cracking on Transverse Cross Section Using Temperature Dependent Interface Element and Quantification of Parameters Included in Proposed Method

M. Shibahara, H. Serizawa, H. Murakawa

Quarterly Journal of the Japan Welding Society　Vol. 22　No. 1　p. 94-100　2004/02　Research paper (scientific journal)

Estimation of Inherent Deformation Using Inverse Analysis:Database of Inherent Deformation for Predicting Welding Distortion (1st Report)

LIANG Wei, SONE Shinji, SERIZAWA Hisashi, MURAKAWA Hidekazu

Preprints of the National Meeting of JWS　Vol. 2004　p. 127-127　2004

Development of New Interface Potential for Simulating Mode I & II Fracture Behavior

H. Serizawa, H. Murakawa

Transactions of JWRI　Vol. 32　No. 2　p. 349-354　2003/12　Research paper (bulletin of university, research institution)

Numerical Simulation of Pear-shaped Bead Cracking in Narrow Gap Welding

M. Shibahara, S. Itoh, H. Serizawa, H. Murakawa

Transactions of JWRI　Vol. 32　No. 2　p. 335-341　2003/12　Research paper (bulletin of university, research institution)

Numerical Simulation of Residual Stress and Deformation Considering Phase Transformation Effect

D. Deng, Y. Luo, H. Serizawa, M. Shibahara, H. Murakawa

Transactions of JWRI　Vol. 32　No. 2　p. 325-333　2003/12　Research paper (bulletin of university, research institution)

Numerical Simulation of Fuzzy Control for Resistance Spot Welding by Monitoring Electrode Temperature

Y. Wu, H. Serizawa, H. Murakawa

Transactions of JWRI　Vol. 32　No. 2　p. 277-282　2003/12　Research paper (bulletin of university, research institution)

Prediction of the Strength of Joints between Dissimilar Elastic Materials

H. Murakawa, H. Serizawa, S. Chiaki, I. Oda

Transactions of JWRI　Vol. 32　No. 2　p. 343-348　2003/12　Research paper (bulletin of university, research institution)

Development of System for Predicting Deformation under Thermal Process Based on Knowledge Management

H. Serizawa, D. Deng, T. Tsumura, H. Murakawa

Proceedings of JWRI Symposium 2003　p. 107-113　2003/09

Modeling and Prediction of Hot Cracking Using Temperature Dependent Interface Element

M. Shibahara, H. Serizawa, H. Murakawa

Journal of Light Metal Welding & Constraction　Vol. 41　No. 8　p. 363-373　2003/08　Research paper (scientific journal)

Theoretical Prediction of Welding Hot Cracking and Its Control

H. Serizawa

Transactions of JWRI　Vol. 32　No. 1　p. 223-226　2003/07　Research paper (bulletin of university, research institution)

Development of an Intelligent Database System for Welding and Joining Technology

Takuya Tsumura, Hisashi Serizawa

Transactions of JWRI　Vol. 32　No. 1　p. 51-53　2003/07　Research paper (bulletin of university, research institution)

Finite Element Simulation of Pear-shaped Bead Cracking in Narrow Gap Welding Using Temperature Dependent Interface Element

M. Shibahara, H. Serizawa, H. Murakawa, T. Nakamura, K. Hiraoka

Proceedings of 7th Workshop on the Ultra-Steel, Ultra Steel: Requirements from New Design of Constructions　p. 344-345　2003/06　Research paper (international conference proceedings)

Temperature Dependence of Internal Friction and Elastic Modulus of SiC/SiC Composites

S. Sato, H. Serizawa, H. Araki, T. Noda, A. Kohyama

Journal of Alloys and Compounds　Vol. 355　p. 142-147　2003/06　Research paper (scientific journal)

Development of System to Predict Welding Distortion by Numerical Analysis

S. Gotoh, S. Konno, R. Narita, K. Kamo, Y. Fujiya, H. Serizawa, H. Murakawa

Reports of Research Commision for Welding Method　Vol. 182　p. 37-37　2003/05

Finite Element Method for Hot Cracking on Transverse Cross Section Using Temperature Dependent Interface Element

M. Shibahara, H. Serizawa, H. Murakawa, Y. Ueda

Proceedings of the 13th International Offshore and Polar Engineering Conference　Vol. 4　p. 195-201　2003/05　Research paper (scientific journal)

Theoretical Study on Forming Twisted Longitudinals by Line Heating

H. Serizawa, R. Miyoshi, H. Murakawa, M. Shibahara

Proceedings of the 13th International Offshore and Polar Engineering Conference　Vol. 4　p. 172-178　2003/05　Research paper (scientific journal)

Theoretical Prediction of Welding Hot Cracking and Its Control

H. Serizawa

Proceedings of the International Symposium of JWRI 30th Anniversary, Joining & Welding Solution to Industrial Innovation　p. 279-282　2003/03　Research paper (international conference proceedings)

Development of Intelligent Database System for Welding and Joining Technology

Takuya Tsumura, Hisashi Serizawa

Proceedings of the International Symposium of JWRI 30th Anniversary Joining & Welding Solution to Industrial Innovation　p. 151-154　2003/03　Research paper (international conference proceedings)

Strength of Joint between Dissimilar Elastic Materials

Advances in Computational & Experimental Engineering & Sciences 2003, Proceedings of the 2003 International Conference on Computational & Experimental Engineering & Sciences (ICCES’03), Chapter 6 : Composite Material Modeling　Vol. CD-ROM　2003

Finite Element Analysis of Joint Strength Between Dissimilar Materials Using Interface Element

Proceeding of 9th International Conference on the Mechanical Behaviour of Materials　Vol. CD-ROM　2003

Finite element analysis of mode-I & II type fracture behavior on ceramic composite joints

H Serizawa, H Murakawa, CA Lewinsohn

27TH INTERNATIONAL COCOA BEACH CONFERENCE ON ADVANCED CERAMICS AND COMPOSITES: B　Vol. 24　No. 4　p. 535-540　2003　Research paper (international conference proceedings)

FEM Simulation of Welding Distortion in Thin Curved Structures during Assembly Considering Gap and Misalignment

D. Deng, H. Serizawa, H. Murakawa

Transactions of JWRI　Vol. 31　No. 2　p. 219-226　2002/12　Research paper (bulletin of university, research institution)

Finite Element Method for Hot Cracking on Transverse Cross Section Using Temperature Dependent Interface Element

M. Shibahara, H. Serizawa, H. Murakawa

Proceedins of the Welding Structure Symposium 2002　p. 599-606　2002/11　Research paper (conference, symposium, etc.)

Finite Element Method for Houldcroft Hot Cracking Test Using Temperature Dependent Interface Element

M. Shibahara, S. Itoh, H. Serizawa, H. Murakawa

Proceedins of the Welding Structure Symposium 2002　p. 591-598　2002/11　Research paper (conference, symposium, etc.)

Evaluation of Joint Strength between Dissimilar Materials Using Interface Element

T. Kashima, H. Serizawa, H. Murakawa, Y. Ueda

Proceedins of the Welding Structure Symposium 2002　p. 577-582　2002/11　Research paper (conference, symposium, etc.)

Theoretical Prediction of Welding Deformation in Thin Curved Structure during Assembly Considering Gap and Misalignment

D. Deng, H. Serizawa, H. Murakawa

Proceedins of the Welding Structure Symposium 2002　p. 129-136　2002/11　Research paper (conference, symposium, etc.)

Development of Finite Element Method for Seam Welding and It's Application to Optimization of Welding Conditions

H. Minami, H. Yamaoka, M. Shibahara, H. Serizawa, H. Murakawa

Proceedins of the Welding Structure Symposium 2002　p. 91-98　2002/11　Research paper (conference, symposium, etc.)

Modeling of Fracture Strength of SiC/SiC Composite Joints by Using Interface Elements

H. Serizawa, H. Murakawa, C.A. Lewinsohn

Advanced SiC/SiC Ceramic Composites: Developments and Applications in Energy Systems, Ceramic Transactions　Vol. 144　p. 335-342　2002/11　Research paper (scientific journal)

Strength Analysis of Joint between Dissimilar Materials Using Interface Element

H. Murakawa, H. Serizawa, Z.Q. Wu, M. Shibahara

Designing of Interfacial Structures in Advanced Materials and their Joints　p. 122-127　2002/11　Research paper (international conference proceedings)

Effects of Scarf Angle on Stress Singularity and Strength of Ceramic Joints

H. Serizawa, C.A. Lewinsohn, H. Murakawa

Ceramic Engineering and Science Proceedings　Vol. 23　No. 3　p. 825-832　2002/10　Research paper (scientific journal)

Influence of Geometry of Joint on Strength of Ceramic Composite Joint

H. Serizawa, C.A. Lewinsohn, H. Murakawa

Transactions of JWRI　Vol. 31　No. 1　p. 71-76　2002/09　Research paper (bulletin of university, research institution)

Finite Element Analysis Using Interface Element for Predicting Deformation during Butt Welding Considering Root Gap and Tack Welds

M. Shibahara, H. Serizawa, H. Murakawa

Transactions of JWRI　Vol. 31　No. 1　p. 63-70　2002/09　Research paper (bulletin of university, research institution)

Computational Analysis of Measurement Technique for Shear Strength of Ceramic Composite Joints

H. Serizawa, C.A. Lewinsohn, H. Murakawa

Proceedings of the third Asian-Australasian Conference on Composite Materials 2002 (ACCM-3)　p. 59-68　2002/07　Research paper (scientific journal)

Theoretical Study on Forming of Twisted T-section Longitudinal from Aspect of Inherent Strain

M.S. Nair, H. Serizawa, H. Murakawa

Proceedings of the Sixteenth Asian-Pacific Technical Exchange and Advisory Meeting on Marine Structures in Asia Pacific Maritime Congress　p. 227-236　2002/05　Research paper (international conference proceedings)

Effect of Various Factors on Transverse Shrinkage under Butt Welding

M. Shibahara, H. Serizawa, H. Murakawa

Proceedings of the Sixteenth Asian-Pacific Technical Exchange and Advisory Meeting on Marine Structures in Asia Pacific Maritime Congress　p. 215-225　2002/05　Research paper (international conference proceedings)

Finite Element Analysis Using Interface Element for Predicting Deformation during Butt Welding Considering Root Gap and Tack Welds

M. Shibahara, H. Serizawa, H. Murakawa, Y. Ueda

Proceedings of the 12th International Offshore and Polar Engineering Conference　Vol. 4　p. 325-331　2002/05　Research paper (scientific journal)

FEM Analysis of Asymmetrical Bending Test for Smart Materials Joints

H. Serizawa, C.A. Lewinsohn, H. Murakawa

Materials Transactions　Vol. 43　No. 5　p. 994-1000　2002/05　Research paper (scientific journal)

Finite Element Method for Hot Cracking Using Interface Element (5th Report) - Analysis for Predicting Deformation and End Cracking during Butt Welding Considering Root Gap and Tack Welds -

M. Shibahara, D. Deng, H. Serizawa, H. Murakawa

Journal of the Kansai Society of Naval Architects, Japan　Vol. 237　p. 237-245　2002/03　Research paper (scientific journal)

Potentiality of Digital Technique in Welding

H. Serizawa, K. Nogi

Welding Technique　Vol. 49　No. 12　p. 62-67　2001/12

Computational Analysis of Charpy Impact Tests Using Interface Elements

H. Serizawa, Z.Q. Wu, H. Murakawa

Transactions of JWRI　Vol. 30　No. 2　p. 97-102　2001/12　Research paper (bulletin of university, research institution)

Theoretical Prediction of Welding Distortion Considering Positioning and the Gap between Parts

D. Deng, H. Serizawa, H. Murakawa

Transactions of JWRI　Vol. 30　No. 2　p. 89-96　2001/12　Research paper (bulletin of university, research institution)

FEM Analysis of Asymmetrical Four-Point Bending Test for Shear Strength of Smart Materials Joints

H. Serizawa, C.A. Lewinsohn, H. Murakawa

Proceedings of the Fourth Pacific Rim International Conference on Advanced Materials and Processing　Vol. 2　p. 1931-1934　2001/12　Research paper (international conference proceedings)

Computer Simulation for Strength Analysis of Joint between Dissimilar Materials Using Interface Element

M. Shibahara, H. Serizawa, H. Murakawa

Proceedings of the Fourth Pacific Rim International Conference on Advanced Materials and Processing　Vol. 2　p. 1927-1930　2001/12　Research paper (international conference proceedings)

Numerical Simulation of Hot Cracking in Welding Using Temperature Dependent Interface Element

M. Shibahara, H. Serizawa, H. Murakawa

Proceedings of the 7th International Symposium of Japan Welding Society　Vol. 2　p. 1075-1080　2001/11　Research paper (international conference proceedings)

Finite Element Method for Analysis of Hot Cracking under Welding Using Temperature Dependent Interface Element

M. Shibahara, H. Serizawa, H. Murakawa

Proceedings of the Fifteenth Asian Technical Exchange and Advisory Meeting on Marine Structures　p. 311-318　2001/10　Research paper (international conference proceedings)

New Computer Simulation Method of Charpy Tests Using Interface Elements

H. Serizawa, Z.Q. Wu, H. Murakawa

Proceedings of Charpy Centenary Conference　Vol. 1　p. 441-448　2001/10　Research paper (international conference proceedings)

Analysis of Asymmetrical Four-Point Bending Test of Ceramic Composite Joints by Using Finite Element Method

H. Serizawa, C.A. Lewinsohn, H. Murakawa

High Temperature Ceramic Matrix Composites　p. 251-256　2001/10　Research paper (international conference proceedings)

FEM Analysis of Experimental Measurement Technique for Mechanical Strength of Ceramic Joints

H. Serizawa, C.A. Lewinsohn, H. Murakawa

Ceramic Engineering and Science Proceedings　Vol. 22　No. 4　p. 635-642　2001/10　Research paper (scientific journal)

Finite Element Method for Hot Cracking Using Interface Element (4th Report) - Analysis of Hot Cracking on Transverse Cross Section -

M. Shibahara, H. Serizawa, H. Murakawa

Journal of the Kansai Society of Naval Architects, Japan　Vol. 236　No. 236　p. 229-238　2001/09　Research paper (scientific journal)

FEM Evaluation of Asymmetrical Four-Point Bending Test on SiC/SiC Composite Joints

H. Serizawa, C.A. Lewinsohn, H. Murakawa

Transactions of JWRI　Vol. 30　No. 1　p. 119-125　2001/07　Research paper (bulletin of university, research institution)

Finite Element Simulation for Hot Cracking under Welding Using Temperature Dependent Interface Element

M. Shibahara, H. Serizawa, H. Murakawa

Proceedings of the Fourth International Congress on Thermal Stresses　p. 137-140　2001/06　Research paper (international conference proceedings)

Finite Element Analysis of Hot Cracking under Welding Using Temperature Dependent Interface Element

M. Shibahara, H. Serizawa, H. Murakawa, Y. Ueda

Proceedings of the 11th International Offshore and Polar Engineering Conference　p. 297-303　2001/06　Research paper (scientific journal)

Interface Element for Strength Analysis of Joint between Dissimilar Materials

H. Murakawa, H. Serizawa, Z.Q. Wu, Y. Ueda

Proceedings of the 11th International Offshore and Polar Engineering Conference　p. 201-205　2001/06　Research paper (scientific journal)

Finite Element Method for Hot Cracking Analysis Using Temperature Dependent Interface Element

M. Shibahara, H. Serizawa, H. Murakawa

Mathematical Modeling of Weld Phenomena 5　p. 253-267　2001/05　Research paper (scientific journal)

Development of Computational Method for Hot Cracking Using Temperature Dependent Interface Element and Application for Fish Bone Type Test

M. Shibahara, H. Serizawa, H. Murakawa

Quarterly Journal of the Japan Welding Society　Vol. 19　No. 2　p. 365-372　2001/05　Research paper (scientific journal)

Strength Analysis of Joint Between Dissimilar Materials Using Interface Element

H. Murakawa, H. Serizawa, Z.Q. Wu, M. Shibahara

Materials Science Research International, Special Technical Publication - 2　p. 209-213　2001/05　Research paper (scientific journal)

Development of Macroscopic Analysis for Crack Growth in SiC/SiC Composite Using Interface Element

H. Serizawa, M. Ando, C.A. Lewinsohn, H. Murakawa

Abstracts of Symposium on Advanced Research of Energy Technology 2001　p. C12-1-C12-2　2001/03

Finite Element Method for Hot Cracking Using Interface Element (3rd Report) - Development of Static-Dynamic Hybrid Method -

M. Shibahara, H. Serizawa, H. Murakawa

Journal of the Kansai Society of Naval Architects, Japan　Vol. 235　p. 161-169　2001/03　Research paper (scientific journal)

Computational Analysis of Creep Fracture Deformation in SiC/SiC Composites

H. Serizawa, M. Ando, C.A. Lewinsohn, H. Murakawa

Journal of Nuclear Materials　Vol. 289　p. 16-22　2001/02　Research paper (scientific journal)

Development of Macroscopic Evaluation Method for Creep Deformation in SiC/SiC Composites

H. Serizawa, M. Ando, C.A. Lewinsohn, H. Murakawa

International Journal of Materials and Product Technology　Vol. 16　No. 1/3/2020　p. 213-222　2001/02　Research paper (scientific journal)

F-1506 FEM Analysis of Measurement Technique for Shear Strength of Ceramic Composite Joints

SERIZAWA Hisashi, LEWINSOHN Charles A., MURAKWA Hidekazu

The proceedings of the JSME annual meeting　Vol. 1　p. 325-326　2001

New Evaluation Method of Crack Growth in SiC/SiC Composites Using Interface Elements

H. Serizawa, M. Ando, C.A. Lewinsohn, H. Murakawa

Journal of Nuclear Materials　Vol. 283-287　p. 579-583　2000/12　Research paper (scientific journal)

Strength Analysis of Joint Between Dissimilar Materials Using Interface Element

H. Murakawa, H. Serizawa, Z.Q. Wu, M. Shibahara

Transactions of JWRI　Vol. 29　No. 2　p. 71-75　2000/12　Research paper (bulletin of university, research institution)

New FEM Analysis of Time-Dependent Crack Growth in SiC/SiC Composites

M. Ando, H. Serizawa, H. Murakawa

Ceramic Engineering and Science Proceedings　Vol. 21　No. 3　p. 195-202　2000/11　Research paper (scientific journal)

Computational Analysis of Crack Growth in SiC/SiC Composite Caused by Creep of Bridging Fibers

H. Serizawa, M. Ando, C.A. Lewinsohn, H. Murakawa

Proceedings of the Second Asian-Australasian Conference on Composite Materials (ACCM-2000), Composites Technologies for the New Millennium　Vol. 1　p. 571-576　2000/08　Research paper (international conference proceedings)

Finite Element Method for Hot Cracking Analysis under Welding Using Temperature Dependent Interface Element

Masakazu Shibahara, Hisashi Serizawa, Hidekazu Murakawa

2000/08　Research paper (other academic)

Finite Element Method for Hot Cracking Using Temperature Dependent Interface Element (Report II) - Mechanical Study of Houldcroft Test -

M. Shibahara, H. Serizawa, H. Murakawa

Transactions of JWRI　Vol. 29　No. 1　p. 59-64　2000/07　Research paper (bulletin of university, research institution)

Finite Element Method for Hot Cracking Analysis under Welding Using Temperature Dependent Interface Element

M. Shibahara, H. Serizawa, H. Murakawa

Modeling of Casting, Welding and Advanced Solidification Processes IX　p. 844-851　2000/07　Research paper (scientific journal)

Finite Element Method for Hot Cracking Analysis under Welding Using Temperature Dependent Interface Element

H. Serizawa, M. Ando, C.A. Lewinsohn, H. Murakawa

Proceedings of the 10th Iketani Conference on Materials Research Toward the 21st Century　p. 389-390　2000/06　Research paper (international conference proceedings)

Finite Element Method for Hot Cracking Using Interface Element (2nd Report) - Quantitative Modeling of Temperature Dependent Interface Element -

M. Shibahara, H. Serizawa, H. Murakawa, Z.Q. Wu

Journal of the Kansai Society of Naval Architects, Japan　Vol. 233　p. 149-155　2000/03　Research paper (scientific journal)

Computer Simulation Method for Crack Growth Using Surface Energy and Its Application to Interface Stripping of Composite Material (3rd Report) - Simulation of Dynamic Crack Propagation in Elastic Plate Using Interface Element -

Z.Q. Wu, A. Emoto, H. Serizawa, H. Murakawa

Journal of the Kansai Society of Naval Architects, Japan　Vol. 233　No. 233　p. 141-148　2000/03　Research paper (scientific journal)

5-11 界面要素を用いたFEMによる溶接高温割れに関する理論的研究 : 第三報 : 静的-動的混合解法の開発

柴原 正和, 芹澤 久, 村川 英一

関西造船協会講演論文集　Vol. 15　p. 93-96　2000

Simulation of Dynamic Crack Propagation in Elastic Plates Using Interface Element (Report II)

Z.Q. Wu, A. Emoto, H. Serizawa, H. Murakawa

Transactions of JWRI　Vol. 28　No. 2　p. 51-56　1999/12　Research paper (bulletin of university, research institution)

Development of Computational Evaluation Method for Creep Deformation of SiC/SiC Composites

H. Serizawa, M. Ando, C.A. Lewinsohn, H. Murakawa

Transactions of JWRI　Vol. 28　No. 2　p. 45-50　1999/12　Research paper (bulletin of university, research institution)

Simulation of Dynamic Crack Propagation in Elastic Plate Using Interface Element

A. Emoto, Z.Q. Wu, H. Serizawa, H. Murakawa

Proceedins of the Welding Structure Symposium '99　Vol. 489　p. 373-378　1999/12　Research paper (conference, symposium, etc.)

Analysis of Slow Crack Growth on SiC/SiC Composites

M. Ando, H. Serizawa, H. Murakawa

Proceedins of the Welding Structure Symposium '99　p. 209-215　1999/12　Research paper (conference, symposium, etc.)

High-Temperature Properties and Creep Resistance of Near-Stoichiometric SiC Fibers

H. Serizawa, C.A. Lewinsohn, G.E. Youngblood, R.H. Jones, D.E. Johnston, A. Kohyama

Ceramic Engineering and Science Proceedings　Vol. 20　No. 4　p. 443-450　1999/11　Research paper (scientific journal)

Computational Analysis of Crack Growth in Composite Materials Using Lennard-Jones Type Potential Function

H. Murakawa, H. Serizawa, Z.Q. Wu

Ceramic Engineering and Science Proceedings　Vol. 20　No. 3　p. 309-316　1999/11　Research paper (scientific journal)

Computer Simulation Method for Crack Growth Using Surface Energy and Its Application to Interface Stripping of Composite Material (2nd Report) - Application to Dynamic Crack Propagation -

Z.Q. Wu, H. Serizawa, H. Murakawa

Journal of the Kansai Society of Naval Architects, Japan　Vol. 232　p. 145-153　1999/09　Research paper (scientific journal)

Finite Element Method for Hot Cracking Using Interface Element (1st Report) - Development of Temperature Dependent Interface Element -

M. Shibahara, H. Serizawa, H. Murakawa

Journal of the Kansai Society of Naval Architects, Japan　Vol. 232　p. 135-144　1999/09　Research paper (scientific journal)

Finite Element Method for Hot Cracking Using Temperature Dependent Interface Element

M. Shibahara, H. Serizawa, H. Murakawa

Transactions of JWRI　Vol. 28　No. 1　p. 47-53　1999/08　Research paper (bulletin of university, research institution)

New FEM Analysis of Crack Growth Behavior in Composite Materials

M. Ando, H. Serizawa, C.A. Lewinsohn, and H. Murakawa

Proceedings of 12th International Conference on Composite Materials (ICCM-12)　1999/07　Research paper (international conference proceedings)

Evaluation of Advanced SiC Fibers for Reinforcement of CMC

H. Serizawa, C.A. Lewinsohn, G.E. Youngblood, R.H. Jones, D.E. Johnston, A. Kohyama

Proceedings of 12th International Conference on Composite Materials (ICCM-12)　1999/07　Research paper (international conference proceedings)

New Computer Simulation Method for Evaluation of Crack Growth Using Lennard-Jones Type Potential Function

Z.Q. Wu, H. Serizawa, H. Murakawa

Time Dependent Mechanical Response of Engineering Ceramics, Key Engineering Materials　Vol. 166　p. 25-32　1999/06　Research paper (scientific journal)

Computational Method for Static and Dynamic Crack Growth Using Interface Potential Energy

H. Serizawa, H. Murakawa, Z.Q. Wu

Progress in Mechanical Behaviour of Materials　Vol. 1　p. 261-266　1999/05　Research paper (international conference proceedings)

High-Temperature Mechanical Properties of Advanced Nicalon Fibers and Their Relationship to Composite Failure

C.A. Lewinsohn, H. Serizawa, D.E. Johnston, G.E. Youngblood, R.H. Jones, A. Kohyama

Advances in Ceramic Composites IV, Ceramic Transactions　Vol. 96　p. 371-379　1999/05　Research paper (scientific journal)

Interfacial Fracture Behavior of SiC/SiC Composites for Fusion Application

T. Hinoki, H. Serizawa, T. Shibayama, W. Zhang, Y. Katoh, A. Kohyama

Proceeding of International Symposium on Environment-Conscious Innovative Materials Processing with Advanced Energy Sources (ECOMAP-98)　p. 571-576　1999/02　Research paper (international conference proceedings)

Strength and Oxidation Resistance of Hi-Nicalon type S at 1373 K

H. Serizawa, C.A. Lewinsohn, G.E. Youngblood, R.H. Jones, D.E. Johnston, A. Kohyama

Proceeding of International Symposium on Environment-Conscious Innovative Materials Processing with Advanced Energy Sources (ECOMAP-98)　p. 583-588　1999/02　Research paper (international conference proceedings)

Simulation of Fracture Process of Advanced Materials Using Interface Element

H. Murakawa, K. Nakacho, N. Abe, H. Serizawa

Proceeding of International Symposium on Environment-Conscious Innovative Materials Processing with Advanced Energy Sources (ECOMAP-98)　p. 577-582　1999/02　Research paper (international conference proceedings)

Crack Propagation Analysis Using Interface Element (Report I) - Theoretical Formulation and Potential Fields of Application -

H. Murakawa, H. Serizawa, Z.Q. Wu

Transactions of JWRI　Vol. 27　No. 2　p. 67-72　1998/12　Research paper (bulletin of university, research institution)

High Temperature Fiber Tensile Tests with A Long Gauge Length and Oxidation Tests of Hi-Nicalon Type S

H. Serizawa, C.A. Lewinsohn, G.E. Youngblood, R.H. Jones, D.E. Johnston, A. Kohyama

Extended Abstracts of the First Asian-Australasian Conference on Composite Materials　Vol. 2　p. 517-1-517-4　1998/10　Research paper (international conference proceedings)

High-Temperature Properties of Newly Developed Advanced SiC Fibers

H. Serizawa, C.A. Lewinsohn, G.E. Youngblood, R.H. Jones, D.E. Johnston, A. Kohyama

High Temperature Ceramic Matrix Composites III, Key Engineering Materials　Vol. 164-165　p. 287-290　1998/09　Research paper (scientific journal)

Group of Surface Revolution and Joining

N. Abe, H. Murakawa, H. Serizawa

Proceedins of the 17th Fusion Reactor Materials Forum　p. 35-48　1998/09

New Computer Simulation Method for Evaluation of Crack Growth Using Lennard-Jones Type Potential Function

Zhengqi Wu, Hisashi Serizawa, Hidekazu Murakawa

1998/09

High Temperature Strength and Oxidation Resistance of Newly Developed SiC Fibers

H. Serizawa, C.A. Lewinsohn, G.E. Youngblood, R.H. Jones, D.E. Johnston, A. Kohyama

Transactions of JWRI　Vol. 27　No. 1　p. 57-60　1998/07　Research paper (bulletin of university, research institution)

Fabrication of Tungsten Coating on SiC/SiC Composites and Evaluation of Its Mechanical Properties - Study of New Evaluation Method for Pealing of Coating and Crack Propagation -

H. Serizawa

Proceedins of the 16th Fusion Reactor Materials Forum　p. 93-98　1998/02

Fabrication of Tungsten Coating on SiC/SiC Composites and Evaluation of Its Mechanical Properties - Tungsten Coating on SiC -

N. Abe, H. Serizawa

Proceedins of the 16th Fusion Reactor Materials Forum　p. 82-92　1998/02

Proposal of Round-robin Tests

H. Serizawa, A. Kohyama, R.H. Jones

Proceedins of the 16th Fusion Reactor Materials Forum　p. 58-59　1998/02

Evaluation of Elastic Properties in C/C Composites by means of FEM Analysis of Fiber Indentation Tests

H. Serizawa, S. Sato, H. Tsunakawa, A. Kohyama

Transactions of JWRI　Vol. 26　No. 2　p. 43-48　1997/12　Research paper (bulletin of university, research institution)

Interfacial Microstructure and Properties of C/C Composites

A. Kohyama, T. Hinoki, Z. Wen, H. Serizawa, S. Sato

Proceedings of the 8th Symposium on High-Performance Materials for Severe Environments　p. 447-457　1997/09　Research paper (conference, symposium, etc.)

FEM Analysis of Micro-Indentation Test for C/C Composites

H. Serizawa, S. Sato, H. Tsunakawa, A. Kohyama

Proceeding of 11th International Conference on Composite Materials　Vol. 2　p. 759-768　1997/07　Research paper (international conference proceedings)

Effect of interfacial shear strength on mechanical property of SiC/SiC

T. Hinoki, A. Kohyama, Z. Wen, H. Serizawa, S. Sato

Science Reports of the Rerearch Institutes Tohoku University Series A-Physics　Vol. 45　No. 1　p. 133-136　1997/03

Young's Modulus Change of Carbon Fibers and C/C Composites by Heat Treatment

H. Serizawa, S. Sato, H. Tsunakawa, A. Kohyama

Tanso　No. 176　p. 8-13　1997/02　Research paper (scientific journal)

Evaluation of Interfacial Shear Strength of SiC/SiC by Nano-indentation Technique

A. Kohyama, T. Hinoki, H. Serizawa, S. Sato

11th International Conference on Composite Materials, Australia, Jul. 14-18, 1997　1997

Effect of Heat Treatment Temperature on Interfacial Mechanical Properties of C/C Composites by means of Micro-Indentation Test

S. Sato, K. Watanabe, H. Serizawa, K. Hamada, A. Kohyama

Proceeding of International Conference on Microstructures and Functions of Materials　p. 157-160　1996/12　Research paper (international conference proceedings)

Effect of Heat Treatment Temperature on Young's Modulus and Microstructure of C/C Composites

S. Sato, H. Serizawa, A. Kohyama, H. Tsunakawa, S. Kagaya

Proceeding of International Conference on Microstructures and Functions of Materials　p. 129-132　1996/12　Research paper (international conference proceedings)

Evaluation of Microstructures and Interfacial Sliding Shear Strength of C/C Composites

A. Kohyama, S. Sato, H. Serizawa, K. Watanabe, T. Hinoki, H. Tsunakawa

Proceedings of the 7th Symposium on High-Performance Materials for Severe Environments　p. 425-432　1996/11　Research paper (conference, symposium, etc.)

Temperature Dependence of Young's Modulus and Internal Friction on SiC Composites

H. Serizawa, S. Sato, A. Kohyama

Proceedins of the 14th Fusion Reactor Materials Forum　p. 7-26　1996/10

Evaluation of Interfacial Sliding Strength in C/C Composites Using Fiber Indentation Test

H. Serizawa

Research Report, NIFS-PROC-30　p. 67-78　1996/10

Temperature Dependence of Young's Modulus and Internal Friction on SiC/SiC Composites

A. Kohyama, H. Serizawa, S. Sato

Proceeding of IEA International Workshop on SiC/SiC Composites for Fusion Structural Applications　p. 171-173　1996/10　Research paper (conference, symposium, etc.)

Tree Dimensional Analysis of Microstructure in C/C Composites by means of TEM Observation

H. Tsunakawa, S. Sato, H. Serizawa, K. Hamada, K. Watanabe, A. Kohyama

Annual Report of Engineering Research Institute, School of Engineering, University of Tokyo　Vol. 55　No. 55　p. 169-174　1996/09

Report of Contribusions for SiC in International Conference (ICCM-10)

H. Serizawa, S. Sato

Proceedins of the 13th Fusion Reactor Materials Forum　p. 1-39　1996/07

Evaluation of Interfacial Shear Strength of C/C Composites by means of Micro-Indentation Test

K. Watanabe, A. Kohyama, S. Sato, H. Serizawa, H. Tsunakawa, K. Hamada, T. Kishi

Materials Transactions, JIM　Vol. 37　No. 5　p. 1161-1165　1996/05　Research paper (scientific journal)

Review of Researches for C/C Composites

A. Kohyama, H. Serizawa, S. Sato

Journal of the Japan Society for Composite Materials　Vol. 22　No. 3　p. 91-99　1996/03

Neutron Irradiation Effect of Microstructure in C/C Composites

A. Kohyama, K. Hamada, S. Sato, T. Tsunakawa, H. Serizawa, M. Narui, H. Kayano

Progress Reports of the Oharai Branch, IMR, Tohoku University　Vol. 14　p. 81-85　1996/03

Elastic FEM Analysis of Fiber Push-Out Test for C/C Composites

H. Serizawa, A. Kohyama, K. Watanabe, T. Kishi, S. Sato

Materials Transactions, JIM　Vol. 37　No. 3　p. 409-413　1996/03　Research paper (scientific journal)

Evaluation of Interfacial Shear Strength of C/C Composites by Means of Micro-Indentation Test

A. Kohyama, S. Sato, H. Tsunakawa, H. Serizawa, K. Watanabe

Proceedings of the 6th Symposium on High-Performance Materials for Severe Environments　p. 381-389　1995/11　Research paper (conference, symposium, etc.)

Effect of Graphitization of Carbon Fiber on Temperature Dependence of Young's Modulus of C/C Composites

H. Serizawa, S. Sato, A. Kohyama

Proceedings of 10th International Conference on Composite Materials　Vol. 4　p. 365-372　1995/08　Research paper (international conference proceedings)

Microstructural Changes by High Temperature Heat Treatment in Carbon/Carbon Composites

H. Tsunakawa, S. Sato, K. Hamada, H. Serizawa, A. Kohyama

Annual Report of Engineering Research Institute, School of Engineering, University of Tokyo　Vol. 53　No. 53　p. 185-190　1994/09

Internal Friction and Gas Desorption of C/C Composites

H. Serizawa, S. Sato, A. Kohyama

Journal of Nuclear Materials　Vol. 212-215　p. 1250-1254　1994/09　Research paper (scientific journal)

Temperature Dependence of Young's Modulus and Microstructures in C/C Composites

H. Serizawa, S. Sato, A. Kohyama

Annual Report of High-power X-ray Laboratory, School of Engineering, University of Tokyo　Vol. 7　p. 5-6　1993/12

Effect of Heat Treatment Temperature on Young's Modulus and Internal Friction of Carbon/Carbon Composites

H. Serizawa, S. Sato, A. Kohyama

Proceedings of 3rd Japan International SAMPE Symposium　Vol. 2　p. 2439-2442　1993/12　Research paper (international conference proceedings)

Effect of Heat Treatment on Microstructure of Carbon/Carbon Composites

H. Tsunakawa, A. Kohyama, S. Sato, K. Hamada, S. Serizawa

Annual Report of Engineering Research Institute, School of Engineering, University of Tokyo　Vol. 52　No. 52　p. 189-194　1993/09

Effect of Heat Treatment Temperature on Young's Modulus and Mechanical Properties of C/C Composites

S. Sato, K. Hamada, H. Serizawa, H. Tsunakawa, A. Kohyama

Annual Report of Engineering Research Institute, School of Engineering, University of Tokyo　Vol. 52　No. 52　p. 133-139　1993/09

Effect of Heat Treatment Temperature on Young's Modulus and Internal Friction of C/C Composites

H. Serizawa, A. Kohyama, S. Sato

Proceedings of 9th International Conference on Composite Materials　Vol. 2　p. 524-531　1993/07　Research paper (international conference proceedings)

Young's Modulus and Internal Friction in C/C Composites at Elevated Temperature

H. Serizawa, S. Sato, A. Kohyama

Proceedings of Japan-Europe Symposium on Composite Materials　p. 245-247　1993/06　Research paper (international conference proceedings)