-
金属材料実験の手引き 実学講座：2-1 引張試験
堀川敬太郎
日本金属学会会報 まてりあ 2023/04
-
放射光X線CTによる無電解Ni-Pめっき7075-T6アルミニウム合金の内部構造解析
堀川敬太郎, 日野実, 清水一行, 戸田裕之, 星野真人, 上杉健太朗
日本金属学会講演大会(Web) Vol. 172nd 2023
-
Analysis of surface microstructures of electroless Ni-P plated Al-Zn-Mg alloys by means of synchrotron X-ray CT
堀川敬太郎, 日野実, 清水一行, 戸田裕之, 星野真人, 上杉健太朗
軽金属学会大会講演概要 Vol. 144th 2023
-
Hydrogen and Materials Characteristic in Solids Ⅳ
Ichikawa Takayuki, Miyaoka Hiroki, Hino Makoto, Horikawa Keitaro, Kanadani Teruto
Journal of the Japan Institute of Metals and Materials Vol. 84 No. 3 p. 67-67 2020
Publisher: The Japan Institute of Metals and Materials
-
Effects of Surface Treatment on Fatigue Property of A5052-H14 and A2017-T4 Aluminum Alloys
Kido Ryota, Kuwano Ryoichi, Hino Makoto, Murayama Keisuke, Kurosaka Seigo, Oda Yukinori, Horikawa Keitaro, Kanadani Teruto
Journal of the Japan Institute of Metals and Materials Vol. 84 No. 3 p. 74-79 2020
Publisher: The Japan Institute of Metals and Materials
-
Effect of Phosphorus Content on Hydrogen Embrittlement for High Strength Steel Treated with Electroless Ni-P Plating
Hino Makoto, Doi Yuho, Kuwano Ryoichi, Oda Yukinori, Horikawa Keitaro
Journal of the Japan Institute of Metals and Materials Vol. 84 No. 3 p. 80-86 2020
Publisher: The Japan Institute of Metals and Materials
-
Effect of Baking on Hydrogen Embrittlement for High Strength Steel Treated with Various Zinc Based Electroplating from a Sulfate Bath
Hino Makoto, Mukai Shunsuke, Shimada Takehiro, Okada Koki, Horikawa Keitaro
Journal of the Japan Institute of Metals and Materials Vol. 84 No. 3 p. 87-91 2020
Publisher: The Japan Institute of Metals and Materials
-
Hydrogen Embrittlement for High-Strength Steel Electroplated with Zinc-Based Coatings
HINO Makoto, HIRAMATSU Minoru, HORIKAWA Keitaro
Journal of The Surface Finishing Society of Japan Vol. 71 No. 5 p. 323-329 2020
Publisher: The Surface Finishing Society of Japan
-
Study of the Fast Movement of Stylidium Column
TACHIBANA Ryohei, KOBAYASHI Hidetoshi, TANIGAKI Kenichi, HORIKAWA Keitaro
The Proceedings of the Bioengineering Conference Annual Meeting of BED/JSME Vol. 2019 2019
Publisher: The Japan Society of Mechanical Engineers
-
Development and application of non-destructive measurement method of elastic modulus of plant leaves
Yoshitsugu Soichiro, tanigaki Kenichi, Horikawa Keitaro, Kobayashi Hidetoshi
The Proceedings of the Bioengineering Conference Annual Meeting of BED/JSME Vol. 2019 2019
Publisher: The Japan Society of Mechanical Engineers
-
Influence of Strain Rate on Fracture Characteristics and Diffusible Hydrogen of High Tensile Steel under Hydrogen Charging
Kitahara Gaku, Tsuji Aya, Asada Takashi, Suzuki Tomohiro, Horikawa Keitaro, Kobayashi Hidetoshi
Zairyo-to-Kankyo Vol. 68 No. 2 p. 46-52 2019
Publisher: Japan Society of Corrosion Engineering
-
Adherence in the Column of Stylidium caesupitosum and High Speed Rotation
TACHIBANA Ryohei, KOBAYASHI Hidetoshi, HORIKAWA Keitaro, TANIGAKI Kenichi
The Proceedings of Mechanical Engineering Congress, Japan Vol. 2019 2019
Publisher: The Japan Society of Mechanical Engineers
-
Impact compression and plastic wave propagation in closed cell foams
TANIGAKI Kenichi, HORIKAWA Keitaro, KOBAYASHI Hidetoshi
The Proceedings of The Computational Mechanics Conference Vol. 2019 p. 208-208 2019
Publisher: The Japan Society of Mechanical Engineers
-
Collision test of actual railway carbody structure made of stainless-steel
OKINO Tomohiro, NAGATA Keisuke, HORIKAWA Keitaro, KOBAYASHI Hidetoshi
The Proceedings of the Materials and Mechanics Conference Vol. 2019 2019
Publisher: The Japan Society of Mechanical Engineers
-
Mechanical Model for Fast Rotational Movement of Stylidium Column
TACHIBANA Ryohei, TANIGAKI Kenichi, Horikawa Keitaro, KOBAYASHI Hidetoshi
The Proceedings of Conference of Kansai Branch Vol. 2018 2018
Publisher: The Japan Society of Mechanical Engineers
-
Effect of starting materials on impact compression synthesis of hexagonal diamond
KAMIYA Takumi, TANIGAKI Kenichi, HORIKAWA Keitaro, KOBAYASHI Hidetoshi
The Proceedings of Conference of Kansai Branch Vol. 2018 p. 411-411 2018
Publisher: The Japan Society of Mechanical Engineers
-
Development of non-destructive measurement method of elastic modulus of plant leaves
YOSHITSUGU Soichiro, TANIGAKI Kenichi, HORIKAWA Keitaro, KOBAYASHI Hidetoshi
The Proceedings of Conference of Kansai Branch Vol. 2018 2018
Publisher: The Japan Society of Mechanical Engineers
-
SPH-FEM Coupled Simulation for Stability of Ground Anchor
TANIGAKI Kenichi, HORIKAWA Keitaro, KOBAYASHI Hidetoshi, MIZUNUMA Mamoru, MINETA Shingo, OKI Shota, TSUDA Masayuki
The Proceedings of the Materials and Mechanics Conference Vol. 2018 2018
Publisher: The Japan Society of Mechanical Engineers
-
Analytical Study on Safety of Passengers in the Event of Level Crossing Accident
OKINO Tomohiro, NAGATA Keisuke, HORIKAWA Keitaro, KOBAYASHI Hidetoshi
The Proceedings of the Materials and Mechanics Conference Vol. 2018 2018
Publisher: The Japan Society of Mechanical Engineers
-
Investigation for prolongation of incident wave in impact tensile test
NUMA Naoki, KOBAYASHI Hidetoshi, OGAWA Kinya, HORIKAWA Keitaro, TANIGAKI Ken-ichi
The Proceedings of Mechanical Engineering Congress, Japan Vol. 2017 2017
Publisher: The Japan Society of Mechanical Engineers
-
Non-destructive acoustic measurement of elastic modulus of plant leaves
YOSHITSUGU Soichiro, TANIGAKI Kenichi, HORIKAWA Keitaro, KOBAYASHI Hidetoshi
The Proceedings of the Materials and Mechanics Conference Vol. 2017 2017
Publisher: The Japan Society of Mechanical Engineers
-
Mechanical contribution of cucumber tendrils as a support structure
NOGAMI Takahiro, KOBAYASHI Hidetoshi, HORIKAWA Keitaro, TANIGAKI Ken-ichi
The Proceedings of the Bioengineering Conference Annual Meeting of BED/JSME Vol. 2017 2017
Publisher: The Japan Society of Mechanical Engineers
-
Hydrogen and Materials Characteristic in Solids III
Ichikawa Takayuki, Orimo Shin–ichi, Kanadani Teruto, Hino Makoto, Fukumuro Naoki, Horikawa Keitaro, Miyaoka Hiroki, Murakami Koji
Journal of the Japan Institute of Metals and Materials Vol. 80 No. 12 p. 719-719 2016
Publisher: The Japan Institute of Metals and Materials
-
DEM study on propagation of particle motion in granular material generated by impact loading
Takeda Shinnosuke, Ogawa Kinya, Tanigaki Kenichi, Horikawa Keitaro, Kobayashi Hidetoshi
The Proceedings of The Computational Mechanics Conference Vol. 2016 2016
Publisher: The Japan Society of Mechanical Engineers
-
Effect of strain rate dependence of cell-wall material on dynamic compressive property of metal foam
TANIGAKI Kenichi, HORIKAWA Keitaro, KOBAYASHI Hidetoshi, OGAWA Kinya
The Proceedings of The Computational Mechanics Conference Vol. 2016 2016
Publisher: The Japan Society of Mechanical Engineers
-
Traits of Microstructure Observed on Surface of Lotus Leaves and Water Repellency
KOBAYASHI Hidetoshi, YAMAUCHI Takeshi, HORIKAWA Keitaro, TANIGAKI Ken-ichi
The Proceedings of the Materials and Mechanics Conference Vol. 2016 p. OS14-13 2016
Publisher: The Japan Society of Mechanical Engineers
-
168 Dynamic response of projectile penetration into granular medium
Takeda Shinnosuke, Ogawa Kinya, Tanigaki Kenichi, Horikawa Keitaro, Kobayashi Hidetoshi
The Proceedings of The Computational Mechanics Conference Vol. 2015 No. 28 p. _168-1_-_168-2_ 2015
Publisher: The Japan Society of Mechanical Engineers
-
180 Numerical analysis of dynamic compression and elasto-plastic wave propagation of closed-cell foam
TANIGAKI Kenichi, HORIKAWA Keitaro, KOBAYASHI Hidetoshi, OGAWA Kinya
The Proceedings of The Computational Mechanics Conference Vol. 2015 No. 28 p. _180-1_-_180-2_ 2015
Publisher: The Japan Society of Mechanical Engineers
-
425 Effects of surface precipitates and hydrogen on fatigue strength of electroless Ni-P plated aluminum alloys
Kanadani Teruto, NAGATA Norihito, FUKUHARA Minoru, NAKAGAWA Keiyu, MURAKAMI Koji, HINO Makoto, HORIKAWA Keitaro
The Proceedings of the Materials and processing conference Vol. 2015 No. 23 p. _425-1_-_425-3_ 2015
Publisher: The Japan Society of Mechanical Engineers
-
510 Examination of Resistant Method of the Reflected Wave Appeared in Elastic Body Having a Discontinuous Surface.
SEO Yuya, TANIGAKI Ken-ichi, HORIKAWA Keitaro, KOBAYASHI Hidetoshi, OGAWA Kinya
The Proceedings of the Materials and processing conference Vol. 2015 No. 23 p. _510-1_-_510-3_ 2015
Publisher: The Japan Society of Mechanical Engineers
-
OS1503-471 Ab initio study of segregation-induced changes in Al grain boundary cohesion
TANIGAKI Kenichi, TAIRA Kensuke, HORIKAWA Keitaro, KOBAYASHI Hidetoshi
The Proceedings of the Materials and Mechanics Conference Vol. 2015 p. _OS1503-47-_OS1503-47 2015
Publisher: The Japan Society of Mechanical Engineers
-
OS9-9 Compressive Deformation of Expanded Polylactic Acid Resin Subjected to Quasi-Static and Dynamic Loadings at Wide Temperatures(Polymers and Resins,OS9 Recent advances in impact engineering,STRENGTH OF MATERIALS)
Yoshimoto Akifumi, Kobayashi Hidetoshi, Horikawa Keitaro, Tanigaki Kenichi
The Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics Vol. 2015 No. 14 p. 159-159 2015
Publisher: The Japan Society of Mechanical Engineers
-
OS9-14 Shock Synthesis of Hexagonal Diamond Using Single-Stage Powder Gun(Shock and Hypervelocity Impact,OS9 Recent advances in impact engineering,STRENGTH OF MATERIALS)
Tanigaki Kenichi, Ishida Takanori, Horikawa Keitaro, Kobayashi Hidetoshi
The Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics Vol. 2015 No. 14 p. 164-164 2015
Publisher: The Japan Society of Mechanical Engineers
-
“Hydrogen and Materials Characteristic in Solids II”
Ichikawa Takayuki, Kanadani Teruto, Hino Makoto, Fukumuro Naoki, Horikawa Keitaro, Miyaoka Hiroki, Murakami Koji
Journal of the Japan Institute of Metals and Materials Vol. 79 No. 3 p. 77-77 2015 Other
-
OS1702 Effect of Strain Rate on Ductility Loss Induced by Pre-fatigue Deformation in 7075 Aluminum Alloys
YAMADA Hiroyuki, TSURUDOME Masaki, OGASAWARA Nagahisa, HORIKAWA Keitaro
The Proceedings of the Materials and Mechanics Conference Vol. 2014 p. _OS1702-1_-_OS1702-3_ 2014
Publisher: The Japan Society of Mechanical Engineers
-
OS1723 Synthesis of high-pressure phase by shock compression of graphite using single-stage powder gun
ISHIDA Takanori, TANIGAKI Kenichi, HORIKAWA Keitaro, KOBAYASHI Hidetoshi
The Proceedings of the Materials and Mechanics Conference Vol. 2014 p. _OS1723-1_-_OS1723-2_ 2014
Publisher: The Japan Society of Mechanical Engineers
-
OS1725 Impact Compressive Characteristics of Polyimide Foam at Various Temperature
YOSHIMOTO Akifumi, KOBAYASHI Hidetoshi, HORIKAWA Keitaro, TANIGAKI Ken-ichi, OGAWA Kinya
The Proceedings of the Materials and Mechanics Conference Vol. 2014 p. _OS1725-1_-_OS1725-3_ 2014
Publisher: The Japan Society of Mechanical Engineers
-
OS1742 Fracture Behaviour and Luminous Phenomenon of Synthetic Quartz
KOBAYASHI Hidetoshi, OGAWA Kinya, HACHIMURA Yuki, TANIGAKI Kenichi, HORIKAWA Keitaro
The Proceedings of the Materials and Mechanics Conference Vol. 2014 p. _OS1742-1_-_OS1742-3_ 2014
Publisher: The Japan Society of Mechanical Engineers
-
OS1746 Penetration of projectile into particulate materials and behavior of ejecta
TAKEDA Shinnosuke, OGAWA Kinya, TANIGAKI Kenichi, HORIKAWA Keitaro, KOBAYASHI Hidetoshi
The Proceedings of the Materials and Mechanics Conference Vol. 2014 p. _OS1746-1_-_OS1746-3_ 2014
Publisher: The Japan Society of Mechanical Engineers
-
Numerical investigation for dynamic compressive deformation and plastic wave propagation of foam materials
Tanigaki Kenichi, Idoji Toru, Horikawa Keitaro, Kobayashi Hidetoshi, Ogawa Kinya
The Proceedings of The Computational Mechanics Conference Vol. 2014 No. 27 p. 779-780 2014
Publisher: The Japan Society of Mechanical Engineers
-
J0410102 Effect of strain rate on tensile properties of 7075 aluminum alloys subjected to pre-fatigue deformation under humid environment
YAMADA Hiroyuki, TSURUDOME Masaki, OGASAWARA Nagahisa, HORIKAWA Keitaro
The Proceedings of Mechanical Engineering Congress, Japan Vol. 2014 p. _J0410102--_J0410102- 2014
Publisher: The Japan Society of Mechanical Engineers
-
J0440204 Measuring In-Plane Elastic moduli of Plant Leaves Using Resonance Method
TANIGAKI Kenichi, MIYATA Atsushi, HORIKAWA Keitaro, KOBAYASHI Hidetoshi
The Proceedings of Mechanical Engineering Congress, Japan Vol. 2014 p. _J0440204--_J0440204- 2014
Publisher: The Japan Society of Mechanical Engineers
-
OS1924 Impact Compressive Deformation Behavior of 7000 Series Aluminum Alloy Foam
WATANABE H, KOBAYASHI H, OGAWA K, HORIKAWA K, TANIGAKI K, SUZUKI S, NONAKA Y, FUKUI T
Vol. 2013 p. "OS1924-1"-"OS1924-2" 2013/10/12
Publisher: The Japan Society of Mechanical Engineers
-
Toward a Remedy against Addiction to Online Games(<Special Section Article>Annual Conference of SSI2012)
ITO Kenichi, MIHARA Satoko, HORIKAWA Yusuke, OSHIMA Keitaro, ITO Yoichi
Socio-Informatics Vol. 1 No. 3 p. 91-113 2013
Publisher: The Society of Socio-Informatics
-
338 Stress wave propagation in axisymmetric elastic body with joint
MICHlSHITA Yohei, OGAWA Kinya, KOBAYASHI Hidetoshi, HORIKAWA Keitaro, TANIGAKI Kenichi
The Proceedings of the Materials and processing conference Vol. 2013 p. _338-1_-_338-3_ 2013
Publisher: The Japan Society of Mechanical Engineers
-
606 Numerical Simulation for Impact Phenomena of Projectile into Particulate Materials
TANIGAKI Kenichi, TAKEDA Shinnosuke, HORIKAWA Keitaro, KOBAYASHI Hidetoshi, OGAWA Kinya
The Proceedings of The Computational Mechanics Conference Vol. 2013 No. 26 p. _606-1_-_606-2_ 2013
Publisher: The Japan Society of Mechanical Engineers
-
OS1925 Quasi-static and Impact Tensile Properties of 7075 Aluminum Alloys Subjected to Pre-fatigue under High Humidity Environment
TSURUDOME Masaki, YAMADA Hiroyuki, OGASAWARA Nagahisa, HORIKAWA Keitaro
The Proceedings of the Materials and Mechanics Conference Vol. 2013 p. _OS1925-1_-_OS1925-3_ 2013
Publisher: The Japan Society of Mechanical Engineers
-
312 A Study about High-speed Impact Behavior of projectile into particulate materials
CHOU Youhi, OGAWA Kinya, KOBAYASHI Hidetoshi, HORIKAWA Keitaro, TANIGAKI Kenichi
The Proceedings of Conference of Kansai Branch Vol. 2013 No. 88 p. _3-16_ 2013
Publisher: The Japan Society of Mechanical Engineers
-
317 Impact Compressive Property of Polyimide Foam
YOSHIMOTO Akifumi, KOBAYASHI Hidetoshi, HORIKAWA Keitaro, TANIGAKI Kenichi
The Proceedings of Conference of Kansai Branch Vol. 2013 No. 88 p. _3-21_ 2013
Publisher: The Japan Society of Mechanical Engineers
-
Self Introduction ∼ Between Metallurgist and Mechanical Engineer ∼
HORIKAWA Keitaro
Journal of the Society of Materials Science, Japan Vol. 62 No. 8 p. 537-537 2013
Publisher: The Society of Materials Science, Japan
-
“Hydrogen and Materials Characteristic in Solids”
Ichikawa Takayuki, Kanadani Teruto, Horikawa Keitaro, Murakami Koji
Journal of the Japan Institute of Metals and Materials Vol. 77 No. 12 p. 551-551 2013 Other
-
609 Impact Deformation of Polyimide Foam at Various Testing Temperature
Yoshimoto Akifumi, Kobayashi Hidetoshi, HORIKAWA Keitaro, Tanigaki Kenichi
Materials and processing conference Vol. 2012 No. 20 p. "609-1"-"609-4" 2012/11/30
Publisher: The Japan Society of Mechanical Engineers
-
310 Fatigue crack propagation property in heat affected zone of carbon steels for ship construction
Joy-A-Ka Acting Sub LT. Sutep
Vol. 2012 No. 87 p. "3-15" 2012/03/16
Publisher: The Japan Society of Mechanical Engineers
-
B-7-58 Implementation and Evaluation of Multitenant Android System
Toyama Masashi, Kurumatani Shunsuke, Chen Eric Y., Horikawa Keitaro, Kinoshita Shingo
Proceedings of the IEICE General Conference Vol. 2012 No. 2 p. 219-219 2012/03/06
Publisher: The Institute of Electronics, Information and Communication Engineers
-
8G31 Study on Unfolding of Lotus Young Leaves from Mechanical View Point
MIZUNO Kotoyo, KOBAYASHI Hidetoshi, OGAWA Kinya, HORIKAWA Keitaro
Vol. 2012 No. 24 p. "8G31-1"-"8G31-2" 2012/01/06
Publisher: The Japan Society of Mechanical Engineers
-
8G33 Folding and Unfolding Motions of Leaflet of Sensitive Plant
KOBAYASHI Hidetoshi, TOMINAGA Naomichi, HORIKAWA Keitaro, WATANABE Keiko
The Proceedings of the Bioengineering Conference Annual Meeting of BED/JSME Vol. 2012 No. 24 p. _8G33-1_-_8G33-2_ 2012
Publisher: The Japan Society of Mechanical Engineers
-
626 Observation of Microstructure for Fatigue-Deformed 7075 Aluminum Alloy in High-Humidity Environment
TSURUDOME Masaki, YAMADA Hiroyuki, MIURA Nobuhiro, OGASAWARA Nagahisa, HORIKAWA Keitaro
The Proceedings of the Materials and processing conference Vol. 2012 p. _626-1_-_626-3_ 2012
Publisher: The Japan Society of Mechanical Engineers
-
505 Continuous Detection of Hydrogen Gas Evolution during Fracture of 7075 Aluminum Alloy
HORIKAWA Keitaro, HOKAZONO Shunsuke, TANIGAKI Kenichi, KOBAYASHI Hidetoshi
The Proceedings of the Materials and processing conference Vol. 2012 No. 20 p. _505-1_-_505-2_ 2012
Publisher: The Japan Society of Mechanical Engineers
-
PS10 Visualization of Hydrogen Diffusion Path during Fatigue Deformation in 7075 Aluminum Alloy
TSURUDOME Masaki, YAMADA Hiroyuki, ASANO Yoshimi, OGASAWARA Nagahisa, HORIKAWA Keitaro
The Proceedings of the Materials and Mechanics Conference Vol. 2012 p. _PS10-1_-_PS10-3_ 2012
Publisher: The Japan Society of Mechanical Engineers
-
G040012 Visualization of hydrogen evolution during fatigue deformation for 7075 aluminum alloy by means of hydrogen microprint technique
YAMADA Hiroyuki, ASANO Yohimi, OGASAWARA Nagahisa, HORIKAWA Keitaro
The Proceedings of Mechanical Engineering Congress, Japan Vol. 2012 p. _G040012-1-_G040012-4 2012
Publisher: The Japan Society of Mechanical Engineers
-
引張変形を与えたAl-Zn-Mg系合金の組織中での水素拡散経路の可視化
六尾政栄, 六尾政栄, 堀川敬太郎, 小林秀敏, 山田浩之, 戸田裕之
日本金属学会講演概要(CD-ROM) Vol. 149th 2011
-
702 Effect of Strain Rate and Testing Temperature on Compressive Properties in P/M Al-Zn-Mg-Cu Alloy
YAMADA Hiroyuki, NISHIHARA Koji, OGASAWARA Nagahisa, HORIKAWA Keitaro, KOBAYASHI Hidetoshi
The Proceedings of Yamanashi District Conference Vol. 2011 p. 188-189 2011
Publisher: The Japan Society of Mechanical Engineers
-
OS2207 Hydrogen Evolution Behavior During Tensile Deformation in 7075 Aluminum Alloy
YAMADA Hiroyuki, HORIKAWA Keitaro, KOBAYASHI Hidetoshi, OGASAWARA Nagahisa
The Proceedings of the Materials and Mechanics Conference Vol. 2011 p. _OS2207-1_-_OS2207-3_ 2011
Publisher: The Japan Society of Mechanical Engineers
-
G040011 Dynamic Detection of Hydrogen Evolution During Tensile Deformation in Aluminum Alloys Used for High Pressure Hydrogen Gas Containers
YAMADA Hiroyuki, ASANO Yoshimi, HORIKAWA Keitaro, OGASAWARA Nagahisa, KOBAYASHI Hidetoshi
The Proceedings of Mechanical Engineering Congress, Japan Vol. 2011 p. _G040011-1-_G040011-5 2011
Publisher: The Japan Society of Mechanical Engineers
-
J191015 Folding/Unfolding Structure Observed in Leaflet of Sensitive Plant
KOBAYASHI Hidetoshi, TOMINAGA Naomichi, HORIKAWA Keitaro, WATANABE Keiko
The Proceedings of Mechanical Engineering Congress, Japan Vol. 2011 p. _J191015-1-_J191015-4 2011
Publisher: The Japan Society of Mechanical Engineers
-
Effect of Loading Rate in Three Point Pending Tests for Rock on Its Fracture Behaviour and Accompanying Electromagnetic Phenomenon
Proc. ICM&P2011 2011
-
Effect of Strain Rate on Hydrogen Evolution during Deformation in Al-Zn-Mg Alloys
Proc. of Thermec 2011 2011
-
Dynamic and Quasi-staic Compression Tests for Polylactic Acid Resin Foam
Proc. of Thermec2011 2011
-
Hydrogen evolution behavior of tensile deformation process in 6061 and 7075 aluminum alloys
Yamada Hiroyuki, Horikawa Keitaro, Matsumoto Takeshi, Kobayashi Hidetoshi, Ogasawara Nagahisa
Journal of Japan Institute of Light Metals Vol. 61 No. 7 p. 297-302 2011
Publisher: The Japan Institute of Light Metals
-
Effect of Loading Rate in Three Point Pending Tests for Rock on Its Fracture Behaviour and Accompanying Electromagnetic Phenomenon
Proc. ICM&P2011 2011
-
Dynamic and Quasi-staic Compression Tests for Polylactic Acid Resin Foam
Proc. of Thermec2011 2011
-
Effect of Strain Rate on Hydrogen Evolution during Deformation in Al-Zn-Mg Alloys
Proc. of Thermec 2011 2011
-
Strain rate dependence of anisotropic compression behavior in porous iron with unidirectional pores
Masakazu Tane, Tae Kawashima, Hiroyuku Yamada, Keitaro Horikawa, Hidetoshi Kobayashi, Hideo Nakajima
JOURNAL OF MATERIALS RESEARCH Vol. 25 No. 6 p. 1179-1190 2010/06
-
Development and operation of the ID federation service for consumers and its strategy
HORIKAWA Keitaro
IEICE technical report Vol. 109 No. 362 p. 41-46 2010/01/07
Publisher: The Institute of Electronics, Information and Communication Engineers
-
Strain-Rate Sensitivity of Plant-Delivered Polylactic Acid Resin Foam in Compression
Proc. of 7-th Int. Sympo. on Impact Engng. (ISIE2010) Vol. pp. 414-419 2010
-
Hydrogen Evolution during Fatigue Deformation in 6061 and 7075 Aluminum Alloys
Proc. of the 12th International Conference on Aluminum Alloys (ICAA12) 2010
-
Al-5mass%Mg合金の準静的および衝撃引張変形で見られる高温脆化現象に及ぼす極微量ナトリウムの影響
軽金属 Vol. Vol.60, No.1, pp31-35. 2010
-
Dynamic Compression Behavior of Lotus-type Porous Iron
Masakazu Tane, Tae Kawashima, Keitaro Horikawa, Hidetoshi Kobayashi, Hideo Nakajima
ECO-MATERIALS PROCESSING AND DESIGN XI Vol. 658 p. 193-+ 2010
-
水素ガスに暴露した炭素鋼のHMTによる水素透過性評価
日本金属学会誌 Vol. Vol.74, No.3, pp.199-204. 2010
-
Current research trends in aluminum alloys for a high-pressure hydrogen gas container
Horikawa Keitaro
Journal of Japan Institute of Light Metals Vol. 60 No. 11 p. 542-547 2010
Publisher: The Japan Institute of Light Metals
-
Hydrogen Evolution Behavior during Tensile Deformation in Austenitic Stainless Steels Exposed to High Compressed Hydrogen Atmospheres
Keitaro Horikawa, Hidetoshi Kobayashi, Motohiro Kanno
PRICM 7, PTS 1-3 Vol. 654-656 p. 2519-+ 2010
-
Hydrogen Evolution during Fatigue Deformation of 6061 and 7075 Aluminum Alloys
Proc. of 12nd International Conference on Aluminum Alloys [ICAA12] 2010
-
環境から水素を導入したアルミニウム合金の衝撃引張特性
日本材料学会衝撃部門委員会講演資料集 Vol. pp.25-31 2010
-
Strain-Rate Sensitivity of Plant-Delivered Polylactic Acid Resin Foam in Compression
Proc. of ISIE2010 2010
-
Strain-Rate Sensitivity of Plant-Delivered Polylactic Acid Resin Foam in Compression
Proc. of 7-th Int. Sympo. on Impact Engng. (ISIE2010) Vol. pp. 414-419 2010
-
Hydrogen Evolution during Fatigue Deformation in 6061 and 7075 Aluminum Alloys
Proc. of the 12th International Conference on Aluminum Alloys (ICAA12) 2010
-
Effect of trace sodium on high temperature embrittlement in quasi-static and impact deformation of Al–5 mass% Mg alloys
Yamada Hiroyuki, Horikawa Keitaro, Kobayashi Hidetoshi
Journal of Japan Institute of Light Metals Vol. 60 No. 1 p. 31-35 2010
Publisher: The Japan Institute of Light Metals
-
Dynamic compression behavior of lotus-type porous iron
Masakazu Tane, Tae Kawashima, Keitaro Horikawa, Hidetoshi Kobayashi, Hideo Nakajima
Materials Science Forum Vol. 658 p. 193-196 2010
-
Hydrogen Permeation Estimated by HMT in Carbon Steel Exposed to Gaseous Hydrogen
Horikawa Keitaro, Okada Hiroaki, Kobayashi Hidetoshi, Urushihara Wataru
Journal of the Japan Institute of Metals and Materials Vol. 74 No. 3 p. 199-204 2010
-
Current research trends in aluminum alloys for a high-pressure hydrogen gas container
Keitaro Horikawa
Keikinzoku/Journal of Japan Institute of Light Metals Vol. 60 No. 11 p. 542-547 2010
-
Hydrogen evolution behavior during tensile deformation in austenitic stainless steels exposed to high compressed hydrogen atmospheres
Keitaro Horikawa, Hidetoshi Kobayashi, Motohiro Kanno
Materials Science Forum Vol. 654-656 p. 2519-2522 2010
-
Hydrogen Evolution during Fatigue Deformation of 6061 and 7075 Aluminum Alloys
Proc. of 12nd International Conference on Aluminum Alloys [ICAA12] 2010
-
Strain-Rate Sensitivity of Plant-Delivered Polylactic Acid Resin Foam in Compression
Proc. of ISIE2010 2010
-
Effect of Trace Sodium on High Temperature Embrittlement in Quasi-Static and Impact Deformation of Al-5 mass% Mg Alloys
YAMADA Hiroyuki, HORIKAWA Keitaro, KOBAYASHI Hidetoshi
MATERIALS TRANSACTIONS Vol. 50 No. 12 p. 2790-2794 2009/12/01
Publisher: The Japan Institute of Metals and Materials
-
Strength and electromagnetic phenomena in impact compressive and bending deformation of rocks
Kazuhiro Tanaka, Kinya Ogawa, Hidetosh Kobayashi, Keiko Watanabe, Shingo Yamashita, Keitaro Horikawa
Zairyo/Journal of the Society of Materials Science, Japan Vol. 58 No. 11 p. 910-916 2009/11
-
Detection of Hydrogen Evolution during Tensile Deformation and Fracture in Carbon Steel
HORIKAWA Keitaro, OKADA Hiroaki, KOBAYASHI Hidetoshi, URUSHIHARA Wataru
Materials Transactions Vol. 50 No. 11 p. 2532-2540 2009/11/01
-
Hydrogen Permeation Estimated by HMT in Carbon Steel Exposed to Gaseous Hydrogen
Keitaro Horikawa, Hiroaki Okada, Hidetoshi Kobayashi, Wataru Urushihara
MATERIALS TRANSACTIONS Vol. 50 No. 9 p. 2201-2206 2009/09
-
Growth behavior of hydrogen micropores in aluminum alloys during high-temperature exposure
Toda Hiroyuki, Hidaka Tatsumasa, Kobayashi Masakazu, Uesugi kentaro, Takeuchi Akihisa, Horikawa Keitaro
Acta Materialia Vol. 57 No. 7 p. 2277-2290 2009/04/01
-
Visualization of Diffusive Hydrogen in Low Alloy Steel by means of Hydrogen Microprint Technique at Elevated Temperatures
HORIKAWA Keitaro, OKADA Hiroaki, KOBAYASHI Hidetoshi, URUSHIHARA Wataru
MATERIALS TRANSACTIONS Vol. 50 No. 4 p. 759-764 2009/04/01
-
Growth behavior of hydrogen micropores in aluminum alloys during high-temperature exposure
H. Toda, T. Hidaka, M. Kobayashi, K. Uesugi, A. Takeuchi, K. Horikawa
ACTA MATERIALIA Vol. 57 No. 7 p. 2277-2290 2009/04
-
Growth behavior of hydrogen micropores in aluminum alloys during high-temperature exposure
H. Toda, T. Hidaka, M. Kobayashi, K. Uesugi, A. Takeuchi, K. Horikawa
ACTA MATERIALIA Vol. 57 No. 7 p. 2277-2290 2009/04
-
Visualization of Diffusive Hydrogen in Low Alloy Steel by means of Hydrogen Microprint Technique at Elevated Temperatures
Keitaro Horikawa, Hiroaki Okada, Hidetoshi Kobayashi, Wataru Ushihara
MATERIALS TRANSACTIONS Vol. 50 No. 4 p. 759-764 2009/04
-
Strength and Electromagnetic Phenomena in Impact Compressive and Bending Deformation of Rocks
TANAKA Kazuhiro, OGAWA Kinya, KOBAYASHI Hidetoshi, WATANABE Keiko, YAMASHITA Shingo, HORIKAWA Keitaro
Journal of the Society of Materials Science, Japan Vol. 58 No. 11 p. 910-916 2009
Publisher: The Society of Materials Science, Japan
-
Effects of traces of sodium and strain rate on grain boundary microstructures in Al-5%Mg alloys deformed at elevated temperatures
Materials Transactions Vol. Vol.50, No.12, pp.2790-2794. 2009
-
High Strain Rate Compression Behaviour of Porous Iron with Directional Pores
2009
-
Detection of Hydrogen Evolution during Tensile Deformation and Fracture in Carbon Steel
Horikawa Keitaro, Okada Hiroaki, Kobayashi Hidetoshi, Urushihara Wataru
MATERIALS TRANSACTIONS Vol. 50 No. 11 p. 2532-2540 2009
-
Impact Tensile Properties of 6061 and 7075 Aluminum Alloys Affected by Environmental Hydrogen
YAMADA Hiroyuki, HORIKAWA Keitaro, TANIGAKI Kenichi, KOBAYASHI Hidetoshi
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A Vol. 75 No. 759 p. 1630-1638 2009
Publisher: The Japan Society of Mechanical Engineers
-
Visualization of Hydrogen during Tensile or Fatigue Deformation of Aluminum Alloys
Proc. Eighteenth International Conference on Processing and Fabrication of Advanced Materials (PFAMXVIII) Vol. Vol. 1, pp, 109-118. 2009
-
Impact Deformation of Thin-Walled Circular Tube Filled with Aluminum Foam in Lateral Compression
J. Solid Mechanics and Materials Engineering Vol. Vol.3, No.1 (2009), pp.64-71 2009
-
Hydrogen Permeation Behavior of Carbon Steel Exposed to Gaseous Hydrogen
Materials Transactions 2009
-
Impact Tensile Strength of Laser Welded Joints Between Different Kinds of Steel Plates Subjected to Pre-Fatigue
KOBAYASHI Hidetoshi, DAIMARUYA Masashi, TSUDA Hiroshi, HORIKAWA Keitaro, NISHIMURA Kazumasa
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A Vol. 75 No. 752 p. 455-461 2009
Publisher: The Japan Society of Mechanical Engineers
-
Effects of traces of sodium and strain rate on grain boundary microstructures in Al-5%Mg alloys deformed at elevated temperatures
Materials Transactions 2009
-
Impact Deformation of Thin-Walled Circular Tube Filled with Aluminum Foam in Lateral Compression
KOBAYASHI Hidetoshi, HORIKAWA Keitaro, OGAWA Kinya, HORI Masahiro
Journal of Solid Mechanics and Materials Engineering Vol. 3 No. 1 p. 64-71 2009
Publisher: The Japan Society of Mechanical Engineers
-
Hydrogen Permeation Estimated by HMT in Carbon Steel Exposed to Gaseous Hydrogen
Horikawa Keitaro, Okada Hiroaki, Kobayashi Hidetoshi, Urushihara Wataru
MATERIALS TRANSACTIONS Vol. 50 No. 9 p. 2201-2206 2009
-
Electromagnetic phenomena associated with dynamic deformation and fracture of rocks
K. Watanabe, K. Ogawa, K. Tanaka, H. Kobayashi, K. Horikawa
DYMAT 2009: 9TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING, VOL 1 Vol. Voi.1 No. 2 p. 757-763 2009
-
Effects of traces of sodium and strain rate on grain boundary microstructures in Al-5%Mg alloys deformed at elevated temperatures
Materials Transactions Vol. Vol.50, No.12, pp.2790-2794. 2009
-
Impact tensile properties of 6061 and 7075 aluminum alloys affected by environmental hydrogen
Hiroyuki Yamada, Keitaro Horikawa, Kenichi Tanigaki, Hidetoshi Kobayashi
Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A Vol. 75 No. 759 p. 1630-1638 2009
Publisher: Japan Society of Mechanical Engineers
-
High Strain Rate Compression Behaviour of Porous Iron with Directional Pores
2009
-
Visualization of Hydrogen during Tensile or Fatigue Deformation of Aluminum Alloys
Proc. Eighteenth International Conference on Processing and Fabrication of Advanced Materials (PFAMXVIII) Vol. Vol. 1, pp, 109-118. 2009
-
Impact Deformation of Thin-Walled Circular Tube Filled with Aluminum Foam in Lateral Compression
J. Solid Mechanics and Materials Engineering Vol. Vol.3, No.1 (2009), pp.64-71 2009
-
Hydrogen Permeation Behavior of Carbon Steel Exposed to Gaseous Hydrogen
Materials Transactions 2009
-
Effects of traces of sodium and strain rate on grain boundary microstructures in Al-5%Mg alloys deformed at elevated temperatures
Materials Transactions 2009
-
Spontaneous Bending of Ni-Ti Alloy Plates Caused by Preferential Hydrogen Absorption
K. Horikawa, Y. Kawabata, H. Kobayashi
MATERIALS TRANSACTIONS Vol. 49 No. 10 p. 2233-2237 2008/10
-
Effect of continuous hydrogen charging on tensile and fatigue properties of amorphous Ni-Zr alloy membranes
K. Horikawa, K. Yamaue, H. Kobayashi
Materials Transactions Vol. 49 No. 10 p. 2238-2242 2008/10
-
Effect of Continuous Hydrogen Charging on Tensile and Fatigue Properties of Amorphous Ni-Zr Alloy Membranes
K. Horikawa, K. Yamaue, H. Kobayashi
MATERIALS TRANSACTIONS Vol. 49 No. 10 p. 2238-2242 2008/10
-
Effect of ambient temperature on impact compressive strength of gum metal
Hidetoshi Kobayashi, Keitaro Horikawa, Makoto Kishi
Zairyo/Journal of the Society of Materials Science, Japan Vol. 57 No. 8 p. 820-825 2008/08
-
Impact tensile properties in Al-Mg-Si base alloys for automotive use
Hiroyuki Yamada, Keitaro Horikawa, Hidetoshi Kobayashi
INTERNATIONAL JOURNAL OF MODERN PHYSICS B Vol. 22 No. 9-11 p. 1123-1128 2008/04
-
Effect of pre-fatigue on dynamic and static tensile properties of laser welded butt joints between different high strength steel plates
H. Kobayashi, M. Daimaruya, H. Tsuda, K. Horikawa, Y. Yamada
INTERNATIONAL JOURNAL OF MODERN PHYSICS B Vol. 22 No. 9-11 p. 1141-1146 2008/04
-
EXPERIMENTAL EXAMINATION ON THE THRUST ENERGY OF SHOCK ABSORBERS FOR PNEUMATIC CYLINDERS
YOSHIDA Keitaro, SATOH Katushi, KAWAKAMI Yukio, HORIKAWA Akiyoshi, OMURA Yuta
Proceedings of the JFPS International Symposium on Fluid Power Vol. 2008 No. 7 p. 743-746 2008
Publisher: The Japan Fluid Power System Society
-
Unfolding of potato flower as a deployable structure
Proceedings of the 6th International Conference on Computation of Shell and Spatial Structures, IASS-IACM 2008: "Spanning Nano to Mega", CD-ROM 2008
-
ゴムメタルの衝撃圧縮強度に及ぼす試験温度の影響
材料 Vol. Vol.57, No.8 (2008), pp.820-825 2008
-
Visualization of Hydrogen Accumulation during Impact Deformation and Fracture of Aluminum Alloy
Proceedings of the 3rd International Conference on Material and Processing ICM&P 2008 (CD-ROM) 2008
-
Impact Lateral Compression Tests of Thin-Walled Circular Tube Filled with Aluminum Foam
Proceedings of the 3rd International Conference on Material and Processing ICM&P 2008 (CD-ROM) 2008
-
Spontaneous Bending of Ni-Ti Alloy Plates caused by Preferential Hydrogen Absorption
Materials Transactions (Special Issue on Effectual Utilization of Hydrogen in Materials), Vol. Vol.49, No.10 (2008), pp.2233-2237 2008
-
Effect of Continuous Hydrogen Charging on Tensile and Fatigue Properties of Amorphous Ni-Zr Alloy Membranes
Materials Transactions (Special Issue on Effectual Utilization of Hydrogen in Materials) Vol. Vol.49, No.10, pp.2238-2242 2008
-
Deployable structures in plants
Hidetoshi Kobayashi, Keitaro Horikawa
CIMTEC 2008 - Proceedings of the 3rd International Conference on Smart Materials, Structures and Systems - Mining Smartness from Nature Vol. 58 p. 31-40 2008
Publisher: Trans Tech Publications Ltd
-
Spontaneous Bending of Ni-Ti Alloy Plates Caused by Preferential Hydrogen Absorption
Materials Transactions, Special Issue on Effectual Utilization of Hydrogen in Materials Vol. Vol.49, No.10, pp.2233-2237 2008
-
Effect of strain rate on high temperature embrittlement in Al-5mass%Mg alloys containing traces of sodium
Aluminum Alloys, Proc. of the 11th International Conference on Aluminum Alloys (ICAA11), Aachen, Germany Vol. Vol.2, pp.1429-1435 2008
-
Effect of Continuous Hydrogen Charging on Tensile and Fatigue Properties of Ni-Zr Amorphous Alloy Membranes
Materials Transactions, Special Issue on Effectual Utilization of Hydrogen in Materials Vol. Vol.49, No.10, pp.2238-2242 2008
-
Visualization of Hydrogen Accumulation during Impact Deformation and Fracture of Aluminum Alloys
Proc. of 3rd JSME/ASME International Conference on Materials and Processing (ICM&P) 2008
-
Impact Lateral Compression Test of Thin-Walled Circular Tube Filled with Aluminum Foam
Proc. of 3rd JSME/ASME International Conference on Materials and Processing (ICM&P) 2008
-
Al-Mg-Si合金の衝撃引張特性に及ぼす合金成分の影響
軽金属学会研究部会報告書「中強度アルミニウム合金の材料物性」 Vol. No.51, pp.33-41. 2008
-
Effect of Ambient Temperature on Impact Compressive Strength of Gum Metal
KOBAYASHI Hidetoshi, HORIKAWA Keitaro, KISHI Makoto
Journal of the Society of Materials Science, Japan Vol. 57 No. 8 p. 820-825 2008
Publisher: The Society of Materials Science, Japan
-
Unfolding of Potato Flower as a Deployable Structure
Proc. of IASS-IACM 2008- 6th ICSSS 2008
-
Unfolding of potato flower as a deployable structure
Proceedings of the 6th International Conference on Computation of Shell and Spatial Structures, IASS-IACM 2008: "Spanning Nano to Mega", CD-ROM 2008
-
Effect of Pre-Fatigue on Dynamic and Static Tensile Properties of Laser Welded Butt Joints between Different High Strength Steel Plates
International Journal of Modern Physics B, Vol. Vol.22 (2008), pp.1141 - 1146 2008
-
Impact tensile properties in Al-Mg-Si base alloys for automotive use
International Journal of Modern Physics B Vol. Vol.22 (2008), pp.1123 - 1128 2008
-
Visualization of Hydrogen Accumulation during Impact Deformation and Fracture of Aluminum Alloy
Proceedings of the 3rd International Conference on Material and Processing ICM&P 2008 (CD-ROM) 2008
-
Impact Lateral Compression Tests of Thin-Walled Circular Tube Filled with Aluminum Foam
Proceedings of the 3rd International Conference on Material and Processing ICM&P 2008 (CD-ROM) 2008
-
Deployable Structures in Plants
Advances in Science and Technology Vol. Vol. 58 (2008), pp.31-40 2008
-
Effect of pre-fatigue on dynamic and static tensile properties of lazer welded butt joints between different high strength steel plates
International Journal of Modern Physics B Vol. Vol.22, No.9/11, pp. 1123-1128 2008
-
Impact Tensile Properties in Al-Mg-Si Base Alloys for Automotive Use
International Journal of Modern Physics B Vol. Vol.22, No.9/11, pp. 1141-1146 2008
-
Deployable Structures in Plants
Advances in Science and Technology Vol. Vol.58, pp. 31-40, online at http://www.scientific.net 2008
-
Effect of environmental hydrogen on impact tensile properties of 6061 and 7075 aluminum alloys
Proc. of the 11th International Conference on Aluminum Alloys (ICAA11) Vol. Vol.2, pp.1136-1442 2008
-
Effect of strain rate on high temperature embrittlement in Al-5mass%Mg alloys containing traces of sodium
Aluminum Alloys, Proc. of the 11th International Conference on Aluminum Alloys (ICAA11) Vol. Vol.2, pp.1429-1435 2008
-
Unfolding of Potato Flower as a Deployable Structure
Proc. of IASS-IACM 2008- 6th ICSSS 2008
-
Spontaneous Bending of Ni-Ti Alloy Plates Caused by Preferential Hydrogen Absorption
Materials Transactions 2008
-
Effect of environmental hydrogen on impact tensile properties of 6061 and 7075 aluminum alloys
Proc. of the 11th International Conference on Aluminum Alloys (ICAA11) 2008
-
Effect of strain rate on high temperature embrittlement in Al-5mass%Mg alloys containing traces of sodium
Proc. of the 11th International Conference on Aluminum Alloys (ICAA11) 2008
-
Visualization of Hydrogen Accumulation during Impact Deformation and Fracture of Aluminum Alloys
Proc. of ICM&P2008 2008
-
Impact Lateral Compression Test of Thin-Walled Circular Tube Filled with Aluminum Foam
Proc. of ICM&P2008 2008
-
Effect of Aging Microstructure on Hydrogen Embrittlement Sensitivity in an Al-Mg-Si Alloy
HORIKAWA Keitaro, NISHIO Hitoshi, KOBAYASHI Hidetoshi, YAMADA Kazuhiro
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A Vol. 73 No. 736 p. 1366-1374 2007/12/25
Publisher: The Japan Society of Mechanical Engineers
-
Slow strain rate testing in Al-5%Mg alloys containing different amount of micro pores
HORIKAWA Keitaro, KOBAYASHI Hidetoshi, TODA Hiroyuki
Vol. 113 p. 119-120 2007/10/10
-
Influence of micro pore on ductile fracture of aluminum alloys
HIDAKA Tatsumasa, TODA Hiroyuki, KOBAYASHI Masakazu, KOBAYASHI Toshiro, SUZUKI Yoshio, UESUGI Kentaro, HORIKAWA Keitaro
Vol. 113 p. 121-122 2007/10/10
-
Effect of environmental hydrogen on impact tensile properties in 6061 and 7075 aluminum alloys
TANIGAKI Ken'ichi, YAMADA Hiroyuki, HORIKAWA Keitaro, KOBAYASHI Hidetoshi
Vol. 113 p. 365-366 2007/10/10
-
Investigation on concentration of hydrogen trapped in micro pores in an aluminum alloy
HIDAKA Tatsumasa, TODA Hiroyuki, KOBAYASHI Masakazu, KOBAYASHI Toshiro, UESUGI Kentaro, HORIKAWA Keitaro
Vol. 112 p. 45-46 2007/04/11
-
Effect of strain rate on hot ductility in Al-5mass%Mg alloys containing 2ppm of sodium
YAMADA Hiroyuki, HORIKAWA Keitaro, KOBAYASHI Hidetoshi
Journal of Japan Institute of Light Metals Vol. 57 No. 1 p. 25-29 2007/01/30
Publisher: The Japan Institute of Light Metals
-
Detection of hydrogen evolution during tensile deformation of a Ti-Ni alloy affected by hydrogen embrittlement
Proc. of the 11th World Conf. on Titanium (JIMIC5) Vol. pp.1229-1232, 2007 2007
-
Hydrogen evolution behavior in an Al-Mg-Si alloy affected by hydrogen embrittlement
Keitaro Horikawa, Hidetoshi Kobayashi
PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3 Vol. 561-565 p. 203-206 2007
-
MECHANICAL INVESTIGATION CONCERNING UNFOLDING OF LILY FLOWER(1E3 Mechanical Analysis & Its Applications)
Kobayashi Hidetoshi, Horikawa Keitaro, Morita Yoshinori
The Proceedings of the Asian Pacific Conference on Biomechanics : emerging science and technology in biomechanics Vol. 2007 No. 3 2007
Publisher: The Japan Society of Mechanical Engineers
-
Al-Mg-Si合金の水素脆化感受性に及ぼす時効組織の影響
日本機械学会論文集 A編 特集号「水素エネルギーシステムに使用される材料の強度問題」 Vol. Vol.73, No.736 (2007), pp.1366-1374 2007
-
Detection of hydrogen evolution during tensile deformation of a Ti-Ni alloy affected by hydrogen embrittlement
Proc. of 11th World Conference on Titanium (JIMIC5) Vol. Vol.2, pp.1229-1232 2007
-
Hydrogen evolution behavior in an Al-Mg-Si alloy affected by hydrogen embrittlement
Keitaro Horikawa, Hidetoshi Kobayashi
Materials Science Forum Vol. 561-565 p. 203-206 2007
-
Detection of hydrogen evolution during tensile deformation of a Ti-Ni alloy affected by hydrogen embrittlement
Proc. of the 11th World Conf. on Titanium (JIMIC5) Vol. pp.1229-1232, 2007 2007
-
Hydrogen Evolution Behavior in an Al-Mg-Si Alloy Affected by Hydrogen Embrittlement
Mater. Sci. Forum, Vol. Vols.561-565 (2007) pp.203-206 2007
-
Mechanical Investigation concerning Unfolding of Lilly Flower
Proc. of the 3rd Asian Pacific Conference on Biomechanics (AP Biomech 2007) Vol. pp.85 2007
-
2712 Effect of Aging Microstructure on Hydrogen Embrittlement Sensitivity in an Ai-Mg-Si Alloy
HORIKAWA Keitaro, NISHIO Hitoshi, KOBAYASHI Hidetoshi
The proceedings of the JSME annual meeting Vol. 2007 p. 585-586 2007
Publisher: The Japan Society of Mechanical Engineers
-
Effect of strain rate on hot ductility in Al-5mass%Mg alloys containing 2 ppm of sodium
Hiroyuki Yamada, Keitaro Horikawa, Hidetoshi Kobayashi
Keikinzoku/Journal of Japan Institute of Light Metals Vol. 57 No. 1 p. 25-29 2007/01
-
Effect of pre-fatigue on dynamic and static tensile properties of lazer welded butt joints between different high strength steel plates
International Journal of Modern Physics B 2007
-
Impact Tensile Properties in Al-Mg-Si Base Alloys for Automotive Use
International Journal of Modern Physics B 2007
-
Hydrogen evolution behavior in an Al-Mg-Si alloy affected by hydrogen embrittlement
Horikawa, K., Kobayashi, H.
Materials Science Forum Vol. 561-565 No. PART 1 2007
Publisher: Materials Science Forum
-
Hydrogen Accumulation Behavior during Bending Deformation of Al-Mg-Si Alloys for Automotive Body Panel
HORIKAWA Keitaro, HIOKA Kenichiro, KOBAYASHI Hidetoshi
Journal of the Japan Institute of Metals and Materials Vol. 70 No. 11 p. 890-896 2006/11/20
Publisher: The Japan Institute of Metals and Materials
-
Hydrogen accumulation behavior during bending deformation of Al-Mg-Si alloys for automotive body panel
Keitaro Horikawa, Kenichiro Hioka, Hidetoshi Kobayashi
JOURNAL OF THE JAPAN INSTITUTE OF METALS Vol. 70 No. 11 p. 890-896 2006/11
-
Effects of strain-rate and pre-fatigue on tensile properties of laser welded joint of high strength steel plates
H. Kobayashi, M. Daimaruya, H. Tsuda, K. Horikawa
JOURNAL DE PHYSIQUE IV Vol. 134 p. 1175-1181 2006/08
-
Origin of intergranular embrittlement of Al alloys induced by Na and Ca segregation: Grain boundary weakening
GH Lu, Y Zhang, S Deng, T Wang, M Kohyama, R Yamamoto, F Liu, K Horikawa, M Kanno
PHYSICAL REVIEW B Vol. 73 No. 22 2006/06
-
Origin of intergranular embrittlement of Al alloys induced by Na and Ca segregation: Grain boundary weakening
GH Lu, Y Zhang, S Deng, T Wang, M Kohyama, R Yamamoto, F Liu, K Horikawa, M Kanno
PHYSICAL REVIEW B Vol. 73 No. 22 2006/06
-
Visualization of hydrogen during fatigue fracture in an Al-Mg-Si alloy
HORIKAWA Keitaro, TAKEUCHI Yusuke, YOSHIDA Kenichi, KOBAYASHI Hidetoshi
Keikinzoku/Journal of Japan Institute of Light Metals Vol. 56 No. 4 p. 210-213 2006/04/30
Publisher: 軽金属学会
-
Prediction of mechanical behaviour of low carbon steel at high strain rate using thermal activation theory and static data
Kinya Ogawa, Hidetoshi Kobayashi, Fumiko Sugiyama, Keitaro Horikawa
JSME International Journal, Series A: Solid Mechanics and Material Engineering Vol. 48 No. 4 p. 228-233 2006/04/15
-
Impact tensile properties in Al-Mg-Si base alloys for automotive use by means of the Split-Hopkinson bar method
YAMADA Hiroyuki, TETTO Masanori, HORIKAWA Keitaro, KOBAYASHI Hidetoshi
Vol. 110 p. 319-320 2006/04/13
-
Unfolding of Petunia Flower from Mechanical Viewpoint
J. of Biomechanics Vol. Vol.39,Supplement 1 (2006), pp.348 2006
-
Hydrogen accumulation during fatigue deformation of Al-Mg-Si base alloys
Keitaro Horikawa, Hidetoshi Kobayashi
ALUMINIUM ALLOYS 2006, PTS 1 AND 2 Vol. 519-521 p. 1053-1058 2006
-
Unfolding of Petunia Flower from Mechanical Viewpoint
J. of Biomechanics Vol. Vol.39,Supplement 1 (2006), pp.348 2006
-
Visualization of hydrogen during fatigue fracture in an Al-Mg-Si alloy
HORIKAWA Keitaro, TAKEUCHI Yusuke, YOSHIDA Kenichi, KOBAYASHI Hidetoshi
Journal of Japan Institute of Light Metals Vol. 56 No. 4 p. 210-213 2006
Publisher: The Japan Institute of Light Metals
-
Hydrogen Accumulation during Fatigue Deformation of Al-Mg-Si Alloys
Materials Science Forum, vol.519-521, 1053-1058 (2006) Vol. vol.519-521, 1053-1058 2006
-
Dynamic and Quasi-Static Tensile Properties of Welded Butt Joint Subjected to Pre-Fatigue
Journal de Physique IV France, 134, 1175-1181 (2006) Vol. 134, 1175-1181 2006
-
アルミニウムの完全リサイクルシステム構築に向けて
軽金属学会研究部会報告書No.45 2005
-
Prediction of Mechanical Behaviour of Low Carbon Steel at High Strain Rate Using Thermal Activation Theory and Static Data
OGAWA Kinya, KOBAYASHI Hidetoshi, SUGIYAMA Fumiko, HORIKAWA Keitaro
JSME International Journal Series A Vol. 48 No. 4 p. 228-233 2005
-
The Content and Effects of Machine Creation Laboratory Using Lego Mindstorms
OYAMA Akira, TAKAGI Hitoshi, KUSAKA Kazuya, HORIKAWA Keitaro
Journal of JSEE Vol. 52 No. 4 p. 20-24 2004/07/20
Publisher: Japanese Society for Engineering Education
-
Have you got any good ideas to develop English skill?
HORIKAWA Keitaro
Vol. 54 No. 6 p. 236-236 2004/06/30
-
Visualization of Hydrogen Distribution in Tensile-Deformed Al-5%Mg Alloy Investigated by means of Hydrogen Microprint Technique with EBSP Analysis
HORIKAWA Keitaro, YOSHIDA Kenichi
MATERIALS TRANSACTIONS Vol. 45 No. 2 p. 315-318 2004/02/20
-
Effect of boron additive on acoustic emission behavior during tensile deformation of Ni_3Al intermetallic compound
Masui Yuji, Yoshida Kenichi, HORIKAWA Keitaro
The Proceedings of Conference of Chugoku-Shikoku Branch Vol. 2004 No. 42 p. 97-98 2004
Publisher: The Japan Society of Mechanical Engineers
-
Hydrogen Microprint with EBSP Analysis in Tensile-deformed Al-5%Mg Alloy
Proc. of 9th International Conference on Aluminum Alloys 2004
-
Frequency Characteristics of Acoustic Emission Waveforms during Gas Leak
Proc. of the 26th European Conference on Acoustic Emission Testing 2004
-
Acoustic Emission Behavior of Martensitic Transformation in Early Stage during Deformation of Cu-Al-Ni Shape Memory Alloy Single Crystals
Proc. of the 26th European Conference on Acoustic Emission Testing 2004
-
Acoustic Emission of Fatigue-deformed Aluminium Alloys for Automotive Panels
Proc. of the 26th European Conference on Acoustic Emission Testing 2004
-
Effect of Pinhole Shape with Divergent Exit on AE Characteristics during Gas Leak
Kenichi Yoshida, Yoshiaki Akematsu, Kiyoshi Sakamaki, Keitaro Horikawa
Journal of Acoustic Emission Vol. 21 2004
-
Acoustic Emission Caused by Environmental Embrittlement of an Al-Mg-Si Alloy
Keitaro Horikawa, Kenichi Yoshida, Akihiro Ohmori, Kiyoshi Sakamaki
Journal of Acoustic Emission Vol. 21 2004
-
水素マイクロプリント法とEBSP解析に基づく引張変形を与えたAl-5%Mg合金中の水素集積の可視化
堀川敬太郎, 吉田憲一
日本金属学会誌 Vol. 68 No. 12 2004
-
Effect of Pinhole Shape with Divergent Exit on AE Characteristics during Gas Leak
Journal of Acoustic Emission 2004
-
Hydrogen Microprint with EBSP Analysis in Tensile-deformed Al-5%Mg Alloy
Proc. of 9th International Conference on Aluminum Alloys 2004
-
Frequency Characteristics of Acoustic Emission Waveforms during Gas Leak
Proc. of the 26th European Conference on Acoustic Emission Testing 2004
-
Acoustic Emission of Fatigue-deformed Aluminium Alloys for Automotive Panels
Proc. of the 26th European Conference on Acoustic Emission Testing 2004
-
Acoustic Emission Behavior of Martensitic Transformation in Early Stage during Deformation of Cu-Al-Ni Shape Memory Alloy Single Crystals
Proc. of the 26th European Conference on Acoustic Emission Testing 2004
-
Acoustic Emission Caused by Environmental Embrittlement of an Al-Mg-Si Alloy
Journal of Acoustic Emission 2004
-
Characteristics of Acoustic Emission Due to Gas Leak through Several Pinholes
AKEMATSU Yoshiaki, YOSHIDA Kenichi, SAKAMAKI Kiyoshi, HORIKAWA Keitaro
Vol. 52 No. 10 p. 565-569 2003/10/01
Publisher: 日本非破壊検査協会
-
D-17-10 フレームワーク変更に伴う移植工数に関する考察
日野 隆一, 堀川 桂太郎, 小村 誠一
電子情報通信学会総合大会講演論文集 Vol. 2003 No. 1 p. 235-235 2003/03/03
Publisher: 一般社団法人電子情報通信学会
-
A study of load valancing for a non-clustering database system
UMEZAKI Toshiya, HORIKAWA Keitaro
Proceedings of the IEICE General Conference Vol. 2003 No. 1 p. 244-244 2003/03/03
Publisher: The Institute of Electronics, Information and Communication Engineers
-
D-13-2 システム間の連携 I/F を変更することなく機能拡張する手法
堀川 桂太郎, 西村 徹
電子情報通信学会総合大会講演論文集 Vol. 2003 No. 2 p. 336-336 2003/03/03
Publisher: 一般社団法人電子情報通信学会
-
Environmentally conscious alloy design
HORIKAWA Keitaro, KANNO Motohiro
Vol. 53 No. 2 p. 82-89 2003/02/28
Publisher: 軽金属学会
-
Diagnosis of Gas Leak by Acoustic Emission
YOSHIDA Kenichi, HORIKAWA Keitaro, SAKAMAKI Kiyoshi, AKEMATSU Yoshiaki
Vol. 52 No. 2 p. 68-72 2003/02/01
Publisher: 日本非破壊検査協会
-
Validation of the boundary conditions on Web Services
Nishimura Toru, Horikawa Keitaro
Proceedings of the IEICE General Conference Vol. 2003 No. 6 p. 234-234 2003
Publisher: The Institute of Electronics, Information and Communication Engineers
-
Effective Practice of Machine Creation Laboratory Using Lego Mindstorms
OYAMA Akira, TAKAGI Hitoshi, KUSAKA Kazuya, Horikawa Keitaro
The proceedings of the JSME annual meeting Vol. 2003 No. 5 p. 201-202 2003
Publisher: The Japan Society of Mechanical Engineers
-
Technique to Evaluate Each Student in Groups
KUSAKA Kazuya, HORIKAWA Keitaro, OYAMA Akira, TAKAGI Hitoshi
The proceedings of the JSME annual meeting Vol. 2003 No. 5 p. 203-204 2003
Publisher: The Japan Society of Mechanical Engineers
-
Evaluation of Material Properties in Aluminum Alloys for Automotive Body Panels
Horikawa Keitaro, Yoshida Kenichi, Sakamaki Kiyoshi
Scientific papers of Faculty of Engineering, Tokushima University Vol. 48 p. 2-2 2003
Publisher: The University of Tokushima
-
Al-Mg-Si合金T４処理材の引張特性
軽金属学会研究部会報告書「アルミニウム基合金における粒界近傍の材料物性」 2003
-
Al-Mg-Si合金T4板材の曲げ特性
軽金属学会研究部会報告書「アルミニウム基合金における粒界近傍の材料物性」 2003
-
自動車ボディ用アルミニウム合金の材料特性評価
堀川敬太郎, 吉田憲一, 坂巻清司
徳島大学工学部研究報告 Vol. 48 2003
-
AE signals caused by environmental embrittlement of an Al-Mg-Si alloy deformed at slow strain rates in laboratory air
HORIKAWA Keitaro, YOSHIDA Kenichi, OHMORI Akihiro, SAKAMAKI Kiyoshi
Journal of Japan Institute of Light Metals Vol. 53 No. 4 p. 147-151 2003
Publisher: The Japan Institute of Light Metals
-
A Test Method on Service Integration Environment
FUKASAWA Hiroaki, KOMURA Seiichi, HORIKAWA Keitaro
Technical report of IEICE. KBSE Vol. 102 No. 503 p. 1-6 2002/12/05
Publisher: The Institute of Electronics, Information and Communication Engineers
-
A study on the influence of regulation enhancings between cooperated systems
HORIKAWA Keitaro, HINO Ryuichi
Technical report of IEICE. KBSE Vol. 102 No. 503 p. 7-12 2002/12/05
Publisher: The Institute of Electronics, Information and Communication Engineers
-
B-28 Study on user management method in Platform Integration Environment
Nishimura Toru, Horikawa Keitaro
Vol. 2002 No. 1 p. 143-144 2002/09/13
Publisher: Forum on Information Technology
-
Effects of Pinhole Shapes and Gas Pressure on Acousic Emission (AE) Characteristics during Gas leak
AKEMATSU Yoshiaki, YOSHIDA Kenichi, SAKAMAKI Kiyoshi, HORIKAWA Keitaro, NISHIKAWA Mitsuhiro
Vol. 51 No. 7 p. 432-437 2002/07/01
Publisher: 日本非破壊検査協会
-
Reply to comments on "Intergranular fracture caused by trace impurities in an Al-5.5 mol% Mg alloy"
K Horikawa, S Kuramoto, M Kanno
SCRIPTA MATERIALIA Vol. 47 No. 2 p. 131-135 2002/07
-
An application development methods with the Platform Integrated Environment
HINO Ryuichi, HORIKAWA Keitaro
IEICE technical report. Artificial intelligence and knowledge-based processing Vol. 101 No. 742 p. 57-64 2002/03/15
Publisher: The Institute of Electronics, Information and Communication Engineers
-
(117)Lego Mindstormsを使った創成型教育の実施と評価(第31セッション 創成教育(II))
日下 一也, 大山 啓, 堀川 敬太郎, 高木 均
工学・工業教育研究講演会講演論文集 Vol. 2002 p. 371-374 2002
Publisher: 公益社団法人 日本工学教育協会
-
Characteristics of acoustic emission waveform during gas leak from a pipe
Proc. of the 25th European Conference on Acoustic Emission Testing (EWGAE-2002) Vol. (EWGAE-2002) 2002
-
Acoustic emission due to the intergranular fracture of Al-Mg-Si base alloys
Proc. of the 25th European Conference on Acoustic Emission Testing (EWGAE-2002) Vol. (EWGAE-2002) 2002
-
Characteristics of acoustic emission behavior during tensile deformation of Ni-Al intermetallic compounds with boron additive
Proc. of the 25th European Conference on Acoustic Emission Testing (EWGAE-2002), Vol. (EWGAE-2002), 2002
-
Acoustic Emission Accompanied by Grain Boundary Embrittlement of an Al-Mg-Si Alloy
Proc. of the 16th International Acoustic Emission Symposium (IAES-16) Vol. (IAES-16) 2002
-
Effects of pinhole shapes with a divergent exit on AE characteristics during gas leak
Proc. of the 16th International Acoustic Emission Symposium (IAES-16) Vol. (IAES-16) 2002
-
Effects of excess silicon and aging condition on acoustic emission behavior of an Al-Mg-Si alloy during tensile test.
HORIKAWA Keitaro, YOSHIDA Kenichi, SAKAMAKI Kiyoshi, HELDER Nguelume, OHMORI Akihiro
Journal of Japan Institute of Light Metals Vol. 52 No. 2 p. 71-75 2002
Publisher: The Japan Institute of Light Metals
-
Acoustic emission behavior during tensile deformation and fracture of Al-Mg-Si base alloys
K Horikawa, K Yoshida, K Sakamaki
ALUMINUM ALLOYS 2002: THEIR PHYSICAL AND MECHANICAL PROPERTIES PTS 1-3 Vol. 396-4 p. 1405-1410 2002
-
Effects of alloy composition and quenching rate on the bendability in Al-Mg-Si alloys
G Itoh, T Suzuki, K Horikawa
ALUMINUM ALLOYS 2002: THEIR PHYSICAL AND MECHANICAL PROPERTIES PTS 1-3 Vol. 396-4 p. 1193-1198 2002
-
Intergranular fracture caused by trace impurities in an Al-5.5 mol% Mg alloy
K Horikawa, S Kuramoto, M Kanno
ACTA MATERIALIA Vol. 49 No. 19 p. 3981-3989 2001/11
-
Plastic workability of T4-tempered Al-Mg-Si alloys
ITOH Goroh, ITOH Nobuhide, HORIKAWA Keitaroh, SUZUKI Takayoshi, HORIUCHI Hisateru
Vol. 100 p. 349-350 2001/04/17
-
Detection and inspection of acoustic emission(AE) behavior during gas leak from a pipe
The 1st International On-Board Seminar for the Development of Environment-friendly Technology 2001
-
Monitoring of Micro-Cracking duiring Heating of Hydrogen Doped Germanium and Silicon Single Crystals by Acoustic Emission Method
Kenichi Yoshida, Wang, Yuqin, Keitaro Horikawa, Kiyoshi Sakamaki, Kenji Kajiyama
Journal of Acoustic Emission Vol. 19 2001
-
About the presentation in the conference
HORIKAWA Keitaro
Vol. 50 No. 1 p. 44-44 2000/01/30
-
115 Acoustic Emission Behavior during Tensile Deformation of NiAl Intermetallic Compound
Yamashita Ryouhei, Yoshida Kenichi, Sakamaki Kiyoshi, HORIKAWA Keitaro
The Proceedings of Conference of Chugoku-Shikoku Branch Vol. 5 No. 2 p. 29-30 2000
Publisher: The Japan Society of Mechanical Engineers
-
Change of Acoustic Emission Activity due to Ductility Improvement of NiAl Intermetallic Compound
15th Int. AE Symp., Progress in Acoustic Emission X 2000
-
Sources of a trace amount of sodium, and its effect on hot ductility of an Al-5mass%Mg alloy
Keitaro Horikawa, Shigeru Kuramoto, Motohiro Kanno
Light Metals Review Vol. 73 2000
-
Effect of trace impurities on intergranular fracture of aluminum alloys
S Kuramoto, K Horikawa, M Kanno
ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3 Vol. 331-3 p. 1531-1536 2000
-
Effects of impurity and temperature on intergranular fracture in an Al-Cu alloy
KURAMOTO S., YAMAMOTO K., HORIKAWA K., KANNO M.
Vol. 96 p. 299-300 1999/05
-
Improvement of Hot Ductility in Al-Mg Base Alloys Caused by Small Amount of Additional Elements
Proceedings for the symposium Automotive Alloys 1999 from the 1999 TMS Annual Meeting & Exhibition 1999
-
Evaluation of TiN Coating Film due to Acoustic Emission
Proc. 2nd Int. Conf. on Advanced Materials Development and Performance 1999
-
Evaluation of Phase Transformation Dynamics of Cu-Ai-Ni Shape Memory Alloy Single Crystal by Acoustic emission Method
Proc. 2nd Int. Conf. on Advanced Materials Development and Performance 1999
-
High temperature embrittlement caused by trace elements and its suppression by additional elements in an Al-5.5mol%Mg alloy
K Horikawa, S Kuramoto, M Kanno
LIGHT METALS 1999 p. 449-462 1999
-
High temperature embrittlement caused by traces of calcium or strontium in an Al-5.5mol%Mg alloy
K Horikawa, S Kuramoto, M Kanno
SCRIPTA MATERIALIA Vol. 39 No. 7 p. 861-866 1998/09
-
Sources of a trace amoutn of sodium, and its effect on hot ductility of an Al-5 mass%Mg alloy
HORIKAWA Keitaro, KURAMOTO Shigeru, KANNO Motohiro
Journal of Japan Institute of Light Metals Vol. 48 No. 8 p. 371-374 1998/08
Publisher: The Japan Institute of Light Metals
-
Effects of a small amount of antimony on hot ductility of an Al-8%Mg alloy
HORIKAWA Keitaro, KURAMOTO Shigeru, KANNO Motohiro
Vol. 94 p. 55-56 1998/05/01
-
Effects of a small amount of boron or silicon on hot ductility of an AI-5%Mg alloy containing traces of sodium
KANNO Motohiro, KURAMOTO Shigeru, UEDA Kenichiro, HORIKAWA Keitaro, OHNISHI Tadakazu, TSUBAKINO Harushige
Vol. 94 p. 85-86 1998/05/01
-
Effects of trace calcium or strontium on hot ductility of an Al-5%Mg alloy
HORIKAWA Keitaro, KOYO Hirotaka, KURAMOTO Shigeru, KANNO Motohiro
Vol. 93 p. 337-338 1997/10/20
-
Suppression of high temperature embrittlement of Al-5%Mg alloys containing a trace of sodium caused by antimony addition
K Ueda, K Horikawa, M Kanno
SCRIPTA MATERIALIA Vol. 37 No. 8 p. 1105-1110 1997/10
-
Improvement in hot ductility of an Al-5%Mg alloy by a trace amount of antimony or bismuth
KANNO Motohiro, UEDA Kenichiro, HORIKAWA Keitaro, OHNISHI Tadakazu, TSUBAKINO Harushige
Vol. 92 p. 59-60 1997/05
-
A Small Amount of Additional Antimony on Hot Ductility of Al-5%Mg Alloys Containing a Trace Amount of Sodium
Light Metals1997 (Proc. of 36th Annual Conference of Metallurgists) 1997
-
Reduction in Sodium Content of Magnesium by Vacuum Heating
ARAKI Ichiroh, HORIKAWA Keitaroh, UEDA Kenichiroh, KANNO Motohiro
Vol. 91 p. 339-340 1996/11
-
The sources of trace sodium which causes a high temperature embrittlement of an Al-5%Mg alloy
HORIKAWA Keitaro, KANNO Motohiro
Vol. 91 p. 305-306 1996/11
-
Effect of trace amounts of impurities on the ductility of an Al-Cu alloy
KANNO Motohiro, HORIKAWA Keitaro, ARAKI Ichiro, OHNISHI Tadakazu, TSUBAKINO Harushige
Vol. 90 p. 45-46 1996/05
-
Precipitation Hardening in an Al-2.4Li-0.19Sc Alloy
Proceedings of 4th International Conference of Aluminum Alloys 1996
-
Effect of small amount of lithium on hot ductility of Al-Mg base alloys
K Horikawa, H Okada, M Kanno
ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3 Vol. 217 p. 1181-1186 1996
-
Effect of trace lithium or potassium on hot ductility of an Al-Mg alloy
HORIKAWA Keitaro, OKADA Hiroshi, KANNO Motohiro
Vol. 89 p. 223-224 1995/11
-
変形中の材料から放出される種々のガス成分の検出
菅野幹宏, 岡田浩, 伊藤吾朗, 堀川敬太郎, 近泉隆二, 松本峰明
東京大学工学部・工学系研究科紀要 Vol. 33 1995
