Metal flow mechanisms during alternating current arc welding and additive manufacturing of aluminium alloy

Bin Xu, Chengyu Zhang, Guokai Zhang, Fan Jiang, Shinichi Tashiro, Manabu Tanaka, Shujun Chen

Communications Materials　Vol. 6　2025/05/11　Research paper (scientific journal)

Elucidation of alkali element's role in optimizing metal transfer behavior in rutile-type flux-cored arc welding

Khoi Dang Le, Shinichi Tashiro, Ngoc Quang Trinh, Tetsuo Suga, Naoki Sawamura, Kazuhiro Fukuda, Shuji Sasakura, J. Eduardo Alvarez-Rocha, Patricio Fernando Mendez, Anthony B. Murphy, Hanh Van Bui, Manabu Tanaka

Journal of Manufacturing Processes　Vol. 139　p. 105-125　2025/02/18　Research paper (scientific journal)

Effects of Longitudinal External Magnetic Field on Metal Transfer Behavior and Spatter Formation in CO2 Arc Welding

Dang Khoi Le, Shinichi Tashiro, Bin Xu, Anthony B. Murphy, Quang Ngoc Trinh, Van Hanh Bui, Toshifumi Yuji, Sarizam B. Mamat, Kenta Yamanaka, Manabu Tanaka, Lei Xiao

Materials　Vol. 18　2025/01/24　Research paper (scientific journal)

産官学連携による核融合実験炉ITERの中心ソレノイド導体製作時の溶接現象メカニズム解明

木坂 有治, 木村 文映, 関口 信雄, 田代 真一, 田中 学, 小澤 俊平, 諏訪 友音

溶接学会誌　Vol. 94　No. 1　p. 34-38　2025/01/17

Effect of current waveform in MIG arc on weld bead formation in plasma-MIG hybrid welding

Shinichi Tashiro, Kazuya Ishida, Kazufumi Nomura, Dongsheng Wu, Anthony B Murphy, Toshifumi Yuji, Manabu Tanaka

IIW Annual Assembly, 2024 (USB)　2024/07　Research paper (international conference proceedings)

Elucidation of droplet detachment mechanism in metal-cored arc welding

Shinichi TASHIRO, Ngoc Quang TRINH, Khoi Dang LE, Tetsuo SUGA, Tomonori KAKIZAKI, Kei YAMAZAKI, Anthony B Murphy, Ackadech LERSVANICHKOOL, Hanh Van BUI, Manabu TANAKA

Journal of Manufacturing Processes　Vol. 124　p. 1583-1605　2024/07　Research paper (scientific journal)

The mechanism of dual-stagnation points flow phenomenon in keyhole plasma arc melt pool and corresponding control strategy

Jingbo Liu, Fan Jiang, Shinichi Tashiro, Shujun Chen, Manabu Tanaka, Chengyu Zhang, Bin Xu, Guokai Zhang

Journal of Manufacturing Processes　Vol. 125　p. 473-488　2024/07　Research paper (scientific journal)

Effect of oxygen in shielding gas on weldability in plasma-GMA hybrid welding process of high-tensile strength steel

Quang Ngoc Trinh, Shinichi Tashiro, Tetsuo Suga, Hiroto Yamaoka, Kotaro Inose, Kosuke Watanabe, Kengo Hyoma, Yoshihiro Tanabe, Van Hanh Bui, Manabu Tanaka

The International Journal of Advanced Manufacturing Technology　2024/07　Research paper (scientific journal)

Optimization of metal transfer in rutile flux-cored arc welding through controlled CO2 concentration in argon-CO2 shielding gas

Ngoc Quang Trinh, Khoi Dang Le, Shinichi Tashiro, Tetsuo Suga, Shuji Sasakura, Kazuhiro Fukuda, Anthony B. Murphy, Hanh Van Bui, Manabu Tanaka

Journal of Manufacturing Processes　Vol. 124　p. 590-603　2024/06/22　Research paper (scientific journal)

Study on Intermetallic Compound (IMC) in dissimilar joining of steel and aluminum (Fe-Al) - a review paper

Syahril Azli Abdul Rahman, Sarizam Mamat, Muhammad Iqbal Ahmad, Narong Mungkung, Toshifumi Yuji, Shinichi Tashiro, Manabu Tanaka

Welding in the World　2024/06　Research paper (scientific journal)

Eligible CO2 content in Ar-CO2 mixture shielding gas for improving metal transfer in metal-cored arc welding

Ngoc Quang Trinh, Shinichi Tashiro, Khoi Dang Le, Tetsuo Suga, Tomonori Kakizaki, Kei Yamazaki, Ackadech Lersvanichkool, Anthony B. Murphy, Hanh Van Bui, Manabu Tanaka

International Journal of Heat and Mass Transfer　Vol. 231　2024/06　Research paper (scientific journal)

Study of molten pool dynamics in keyhole TIG welding by numerical modelling

Xinxin Wang, Jia Zhang, Shinichi Tashiro, Manabu Tanaka

Journal of Manufacturing Processes　Vol. 119　p. 827-841　2024/06　Research paper (scientific journal)

An investigation on plasma-MIG hybrid welding process of thick plate aluminum

Toshifumi Yuji, Shinichi Tashiro, Hiroyuki Kinoshita, Kentaro Yasui, Toshio Bouno, Wu Ziang, Wu Dongsheng, Wittawat Poonthong, Syahril Azli Abdul Rahman, Sarizam Bin Mamat, Manabu Tanaka

Journal of Advanced Joining Processes　Vol. 9　p. 100188-100188　2024/06　Research paper (scientific journal)

Effect of current waveform in MIG arc on weld bead formation in plasma-MIG hybrid welding

Kazuya Ishida, Shinichi Tashiro, Kazufumi Nomura, Dongsheng Wu, Anthony B. Murphy, Toshifumi Yuji, Manabu Tanaka

The International Journal of Advanced Manufacturing Technology　2024/05　Research paper (scientific journal)

ガスメタルアーク溶接においてシールドガス組成がヒューム生成プロセスに及ぼす影響の数値解析

田代 真一

軽金属溶接　Vol. 62　No. 3　p. 133-140　2024/03

Interaction Mechanism of Arc, Keyhole, and Weld Pool in Keyhole Plasma ArcWelding: A Review

Shinichi Tashiro

Materials　Vol. 17　2024/03　Research paper (scientific journal)

Influencing mechanisms of melt behavior on metal vapor characteristic and columnar grain formation in wire-arc directed energy deposition of titanium alloy

Xiao Xiao, Dongsheng Wu, Hisaya Komen, Lingran Meng, Wang Zhang, Pengkang Zhao, Shinichi Tashiro, Anthony B. Murphy, Manabu Tanaka

Additive Manufacturing　Vol. 82　p. 104029-104029　2024/02　Research paper (scientific journal)

Numerical analysis of arc physics and energy transfer under circumferential gas constraint effect

Fan Jiang, Xiangjun Gao, Bin Xu, Guokai Zhang, Chenglei Fan, Shinichi Tashiro, Manabu Tanaka, Shujun Chen

International Journal of Heat and Mass Transfer　Vol. 221　2023/12　Research paper (scientific journal)

Numerical investigation of the arc behaviour and air transport during pulsed tungsten inert gas arc-based additive manufacturing

Xinxin Wang, Shinichi Tashiro, Manabu Tanaka, Ngoc Quang Trinh

The International Journal of Advanced Manufacturing Technology　2023/09/07　Research paper (scientific journal)

Numerical Investigation of the Iron and Oxygen Transport in Arc Plasma During an Activated Tungsten Inert Gas Welding Process

Xinxin Wang, Shinichi Tashiro, Manabu Tanaka, Anthony B. Murphy

Plasma Chemistry and Plasma Processing　2023/07　Research paper (scientific journal)

Numerical investigations of arc plasma characteristic parameters evolution and metal properties in GMAW-based WAAM of Al alloy with an integrated model

Wenyong Zhao, Yanhong Wei, Shinichi Tashiro, Manabu Tanaka, Anthony B. Murphy

Journal of Manufacturing Processes　Vol. 99　p. 321-337　2023/05　Research paper (scientific journal)

Deepening the understanding of arc characteristics and metal properties in GMAW-based WAAM with wire retraction via a multi-physics model

Wenyong Zhao, Shinichi Tashiro, Anthony B. Murphy, Manabu Tanaka, Xiangbo Liu, Yanhong Wei

Journal of Manufacturing Processes　Vol. 97　p. 260-274　2023/05　Research paper (scientific journal)

Individual Effects of Alkali Element and Wire Structure on Metal Transfer Process in Argon Metal-Cored Arc Welding

Hanh Van Bui, Ngoc Quang Trinh, Shinichi Tashiro, Tetsuo Suga, Tomonori Kakizaki, Kei Yamazaki, Ackadech Lersvanichkool, Anthony B. Murphy, and Manabu Tanaka

materials　Vol. 16　2023/04　Research paper (scientific journal)

Dynamic vapor and keyhole behavior, and equiaxed dendrite formation in blue laser processing of copper

Dongsheng Wu, Junhao Sun, Zhuguo Li, Shinichi Tashiro, Anthony B. Murphy, Ninshu Ma, Manabu Tanaka, Jian Huang, Ke Feng, Changqing Liu, Wei Jiao

International Journal of Heat and Mass Transfer　Vol. 209　2023/03　Research paper (scientific journal)

Numerical investigation of the arc properties in gas tungsten arc?based additive manufacturing

Xinxin Wang, Jia Zhang, Ying Deng, Dawei Chen, Ngoc Quang Trinh, Shinichi Tashiro, Manabu Tanaka

Welding in the World　Vol. 67　No. 4　p. 945-954　2023/01　Research paper (scientific journal)

Dynamic keyhole behaviors and element mixing in paraxial hybrid plasma-MIG welding with a gap

Dongsheng Wu, Kazuya Ishida, Shinichi Tashiro, Kazufumi Nomura, Xueming Hua, Ninshu Ma, Manabu Tanaka

International Journal of Heat and Mass Transfer　Vol. 200　p. 123551 (12pp)-123551　2022/10　Research paper (scientific journal)

Effect of Gap Bridging Distance on the Weldability of Aluminum Alloy to Galvanized Steel Joints in AC pulse GMAW

HONG SEONG MIN, Shinichi Tashiro, Hee-Seon Bang, Manabu Tanaka

Metals and Materials International　2022/10　Research paper (scientific journal)

Metal Transfer Behavior of Metal-Cored Arc Welding in Pure Argon Shielding Gas

Ngoc Quang Trinh, Shinichi Tashiro, Tetsuo Suga, Tomonori Kakizaki, Kei Yamazaki, Ackadech Lersvanichkool, Hanh Van Bui, Manabu Tanaka

metals　Vol. 12　2022/09　Research paper (scientific journal)

Multi-physical modelling of alloy element transportation in wire arc additive manufacturing of a γ-TiAl alloy

Jianwen Xin, Dongsheng Wu, Chen Shen, Lin Wang, Xueming Hua, Ninshu Ma, Shinichi Tashiro, Manabu Tanaka

International Journal of Thermal Sciences　Vol. 179　No. 107641　p. 1-8　2022/07　Research paper (scientific journal)

Effect of flux ratio on droplet transfer behavior in metal-cored arc welding

Ngoc Quang TRINH, Shinichi TASHIRO, Tetsuo SUGA, Tomonori KAKIZAKI, Kei YAMAZAKI, Tomokazu MORIMOTO, Hiroyuki SHIMIZU, Ackadech LERSVANICHKOOL, Hanh Van BUI, Manabu TANAKA

IIW Annual Assembly, 2022 (USB)　2022/07　Research paper (international conference proceedings)

Numerical Simulation of Arc Behaviour in TIG/MIG Hybrid Welding Process of Aluminium Alloy

Rose Alifah Ellyana Roslan, Sarizam Mamat, Pao Ter Teo, Firdaus Mohamad, Yuji Toshifumi, Shinichi Tashiro, Manabu Tanaka

AIP Conf. Proc.　Vol. 2454　p. 060009-1-060009-9　2022/06　Research paper (scientific journal)

Weldability of Dissimilar Materials (AA5052 Aluminium Alloy - Galvannealed High Strength Steel) Joints by Direct Current Pulsed Gas Metal Arc Welding

Seong Min Hong, Shinichi Tashiro, Hee-Seon Bang, Manabu Tanaka

AIP Conf. Proc.　Vol. 2454　p. 060036-1-060036-5　2022/06　Research paper (scientific journal)

Effect of pumping gas on temperature field and pressure in hollow tungsten arc

Fan Jiang, Qi Miao, Yunxiang Zhang, Bin Xu, Shinichi Tashiro, Manabu Tanaka, Shunjun Chen

International Journal of Thermal Sciences　Vol. 179　2022/05　Research paper (scientific journal)

Influence Mechanism of Metal Vapor in Plasma Arc Lap Welding-Metal vapor decreases arc energy efficiency in conduction plasma arc lap welding-

Zihan Li, Dongsheng Wu, Shinichi Tashiro, Manabu Tanaka, Jianwen Xin, Huan Wang, Xueming Hua

WELDING JOURNAL　Vol. 101　p. 161-s-171-s　2022/05　Research paper (scientific journal)

Numerical Analysis of Physical Characteristics and Heat Transfer Decoupling Behavior in Bypass Coupling Variable Polarity Plasma Arc

Fan Jiang, Qi Miao, Bin Xu, Shinichi Tashiro, Manabu Tanaka, Sanbao Lin, Chenglei Fan, Shujun Chen

materials　Vol. 15　2022/04　Research paper (scientific journal)

Elucidation of arc coupling mechanism in plasma-MIG hybrid welding process through spectroscopic measurement of 3D distributions of plasma temperature and iron vapor concentration

Kazuya Ishida, Shinichi Tashiro, Kazufumi Nomura, Dongsheng Wu, Manabu Tanaka

Journal of Manufacturing Processes　Vol. 77　p. 743-753　2022/04　Research paper (scientific journal)

Mild Steel Metal Rotating Spray Transfer Behavior in Magnetically Controlled Gas Metal Arc Welding

Lei Xiao, Ding Fan, Jiankang Huang, Shinichi Tashiro, Manabu Tanaka

Materials Today Communications　Vol. 31　2022/03　Research paper (scientific journal)

Numerical Analysis of Metal Transfer Process in Plasma MIG Welding

Shinichi Tashiro, Sarizam Bin Mamat, Anthony B Murphy, Toshifumi Yuji, Manabu Tanaka

Metals　Vol. 12　2022/02　Research paper (scientific journal)

Observation of Microstructure and Mechanical Properties in Heat Affected Zone of As-Welded Carbon Steel by Using Plasma MIG welding Process

Sarizam Mamat, Nur Azmina Sidek, Nur Aina Aqilah Mohd Afandi, Rose Alifah Ellyana Roslan, Teo Pao Ter, Toshifumi Yuji, Shinichi Tashiro, Manabu Tanaka

Metals　Vol. 12　2022/02　Research paper (scientific journal)

溶接の自動化・デジタル化の障害となる施工裕度に関して―熱管理と拡散性水素低減プロセスを例に―

迎井 直樹, 田代 真一, 田中 学

溶接技術　Vol. 70　p. 43-46　2022/01

A Study on Reducing Oxygen Content in Weld Metals for Narrow Groove GMA Welding with a Local CO2 Adding Nozzle

T. Nakashima, Y. Kisaka, F. Kimura, S. Tashiro, M. Tanaka

Quarterly Journal of the Japan Welding Society　Vol. 39　No. 4　p. 301-308　2021/12　Research paper (scientific journal)

Influence of Groove on Metal Vapour Behavior and Arc Characteristics in TIG Welding of High Manganese Stainless Steels

Shinichi TASHIRO, Satoshi MIKI, Anthony B. MURPHY, Manabu TANAKA, Yuji KISAKA, Fumiaki KIMURA, Tomone SUWA, Yoshikazu TAKAHASHI

Plasma Chemistry and Plasma Processing　Vol. 42　p. 229-245　2021/11　Research paper (scientific journal)

Elucidate Fluid Vortex in Plasma Arc Welding

Thanh-Hai Nguyen, Nguyen Van Anh, Shinichi Tashiro, Thu Le Quy, and Manabu Tanaka

Recent Advances in Manufacturing Engineering and Processes　p. 79-86　2021/10　Research paper (international conference proceedings)

Influence of Cross-Wind on CO2 Arc Welding of Carbon Steel

Shinichi Tashiro, Ngoc Quang Trinh, Tetsuo Suga, Natsume Matsuda, Naotaka Tsurumaru, Tomohiko Maeda, Ryohei Tanaka, Satoshi Nakatsu, Gen Tsujii, Hanh Van Bui, Manabu Tanaka

Metals　Vol. 11　2021/10　Research paper (scientific journal)

Influence of Sulfur Content on Penetration Depth in TIG Welding for High Manganese Stainless Steels

Yuji Kisaka, Satoshi Miki, Nobuo Sekiguchi, Fumiaki Kimura, Shinichi Tashiro, Manabu Tanaka, Shumpei Ozawa, Tomone Suwa, and Yoshikazu Takahashi

Metallurgical and Materials Transactions A　2021/10　Research paper (scientific journal)

Relationship among Welding Defects with Convection and Material Flow Dynamic Considering Principal Forces in Plasma Arc Welding

Huu Loc Nguyen, Anh Van Nguyen, Han Le Duy, Thanh-Hai Nguyen, Shinichi Tashiro, Manabu Tanaka

Metals　Vol. 11　2021/09　Research paper (scientific journal)

Numerical analysis of the effect of heat loss by zinc evaporation on aluminum alloy to hot-dip galvanized steel joints by electrode negative polarity ratio varied AC pulse gas metal arc welding

Seong Min Hong, Shinichi Tashiro, Hee-Seon Bang, Manabu Tanaka

Journal of Manufacturing Processes　Vol. 69　p. 671-683　2021/08　Research paper (scientific journal)

Physical mechanisms of fluid flow and joint inhomogeneity in variable-polarity plasma arc welding of thick aluminum alloy plates

Bin Xu, Shinichi Tashiro, Manabu Tanaka, Fan Jiang, Shujun Chen

Physics of Fluids　Vol. 33　2021/08　Research paper (scientific journal)

Effects of alkaline elements on the metal transfer behavior in metal cored arc welding

Ngoc Quang Trinh, Shinichi Tashiro, Keigo Tanaka, Tetsuo Suga, Tomonori Kakizaki, Kei Yamazaki, Tomozaku Morimoto, Hiroyuki Shimizu, Ackadech Lersvanichkool, Anthony B. Murphy, Hanh Van Bui, Manabu Tanaka

Journal of Manufacturing Processes　Vol. 68　p. 1448-1457　2021/07　Research paper (scientific journal)

A Study on the Effect of CurrentWaveform on Intermetallics Formation and the Weldability of Dissimilar MaterialsWelded Joints (AA5052 Alloy-GI Steel) in AC Pulse GMAW

Seong Min HONG, Shinichi TASHIRO, Hee-Seon BANG, Manabu TANAKA

Metals　Vol. 11　2021/03　Research paper (scientific journal)

Observation of Arc Behaviour in TIG/MIG Hybrid Welding Process

Rose Alifah Ellyana Roslan, Sarizam Mamat, Pao Ter Teo, Firdaus Mohamad, Srinath Gudur, Yuji Toshifumi, Shinichi Tashiro, Manabu Tanaka

IOP Conference Series: Earth and Environmental Science　Vol. 596　2021/02　Research paper (scientific journal)

Physical mechanism of material flow in variable polarity plasma arc keyhole welding revealed by in situ X-ray imaging

Bin Xu, Shujun Chen, Shinichi Tashiro, Fan Jiang, and Manabu Tanaka

Physics of Fluids　Vol. 33　No. 1　2021/01　Research paper (scientific journal)

3D Numerical Study of External Axial Magnetic Field-Controlled High-Current GMAW Metal Transfer Behavior

Lei Xiao, Ding Fan, Jiankang Huang, Shinichi Tashiro, Manabu Tanaka

materials　Vol. 13　2020/12　Research paper (scientific journal)

Coupled mechanisms of the keyhole, energy transfer and compositional change associated with the variable polarity plasma arc process

Dongsheng Wu, Shinichi Tashiro, Xueming Hua, Manabu Tanaka

Journal of Physics D: Applied Physics　Vol. 54　2020/12　Research paper (scientific journal)

Effect of the Eddies Formed inside a Weld Pool on Welding Defects during Plasma Keyhole Arc Welding

Anh Van Nguyen, Shinichi Tashiro, Manh Huu Ngo, Hanh Van Bui, Manabu Tanaka

Journal of Manufacturing Processes　Vol. 59　p. 649-657　2020/10　Research paper (scientific journal)

Effect of Plasma Flow in Plasma MIG Welding Process to the Microstructure Refinement at Heat Affected Zone of As-Welded Carbon Steel

Sarizam Mamat, Aina Aqilah Mohd. Afandi, Mohamad Bashree Abu Bakar, Mohamad Najmi Masri, Mazlan Mohamed, Mohammad Khairul Azhar Abdul Razab, Toshifumi Yuji, Shinichi Tashiro, Manabu Tanaka

Materials Science Forum　Vol. 1010　p. 15-20　2020/09　Research paper (scientific journal)

Study of Shieldability of the Low Hydrogen Welding Process by Numerical Simulation

Naoki MUKAI, Shinichi TASHIRO, Anthony B. MURPHY, Yoshihide INOUE, Tetsuo SUGA, Manabu TANAKA

Journal of Smart Processing　Vol. 9　No. 4　p. 199-207　2020/07　Research paper (scientific journal)

3D numerical study on high-current GMAW metal transfer behavior with an external alternating axial magnetic field

L. Xiao, D. Fan, J.K. Huang, S. Tashiro, M. Tanaka

IIW Annual Assembly, 2020 (USB)　2020/07　Research paper (international conference proceedings)

Research and Development of a Novel Welding technology for joining Ultra-thin sheet applying in Metal forming fields

A. N. Van, A. Murata, S. Tashiro, M. N. Huu, M. Tanaka

IIW Annual Assembly, 2020 (USB)　2020/07　Research paper (international conference proceedings)

Numerical study of keyhole behaviors and thermal fluid flow in high current plasma arc welding

WU Dongsheng, TASHIRO Shinichi, HUA Xueming, TANAKA manabu

Quarterly Journal of the Japan Welding Society　Vol. 38　p. 40s-43s　2020/07　Research paper (scientific journal)

Numerical Analysis on Thermal Characteristics of Direct Current Pulsed Gas Metal Arc Welded Joints of AA5052 Aluminum Alloy to DP590 High Strength Steel

HONG Seong Min, TASHIRO Shinichi, BANG Hee-Seon, TANAKA Manabu

Quarterly Journal of the Japan Welding Society　Vol. 38　p. 93s-97s　2020/07　Research paper (scientific journal)

Interactive Phenomena in Hybrid KPAW-GMAW-P

D. Wu, S. Tashiro, Z. Wu, K. Nomura, X. Hua, M. Tanaka

Welding Journal　Vol. 99　p. 146-s-155-s　2020/07　Research paper (scientific journal)

Study on the weld bead formation on square-groove butt joint using plasma-MIG hybrid welding process

ISHIDA Kazuya, TASHIRO Shinichi, MIZUTANI Masami, TANAKA Manabu

Quarterly Journal of the Japan Welding Society　Vol. 38　p. 135s-138s　2020/06　Research paper (scientific journal)

Effect of focal position on laser-MAG arc hybrid weld bead of thick high-strength steel plate

ISHIDA Kazuya, TASHIRO Shinichi, MIZUTANI Masami, TANAKA Manabu

Quarterly Journal of the Japan Welding Society　Vol. 38　p. 131s-134s　2020/06　Research paper (scientific journal)

Influence of thermodynamic and transport properties of gas on heat load to bulb of xenon short arc lamp

Shiro MAENAKA, Shinichi TASHIRO, Anthony B. MURPHY, Kazunori FUJITA, Manabu TANAKA

Journal of Smart Processing　Vol. 9　No. 3　p. 148-155　2020/05　Research paper (scientific journal)

Application of Duplex Current Feeding Metal Inert Gas Welding to Overlay Welding using Nickel Based Alloy Welding

Atsuhito AOKI, Shinichi TASHIRO, Hideaki KUROKAWA, Manabu TANAKA

Journal of Smart Processing　Vol. 9　No. 3　p. 140-147　2020/05　Research paper (scientific journal)

Investigation of the influence of buoyancy on gas convection of a horizontal xenon short arc lamp through 3D numerical simulation

Shiro Maenaka, Shinichi Tashiro, Anthony B. Murphy, Kazunobu Fujita, Manabu Tanaka

Journal of Physics D: Applied Physics　Vol. 53　2020/05　Research paper (scientific journal)

Numerical simulation of magnetic blowout process of air arc plasma in electrical contacts

TASHIRO Shinichi, ITODA Shuichi, MORICHI Takahiro, MURPHY B. Anthony, TANAKA Manabu

Quarterly Journal of the Japan Welding Society　Vol. 38　p. 74s-78s　2020/04　Research paper (scientific journal)

Numerical Prediction of Feasibility to Lower Droplet Temperature in Duplex Current Feeding MIG Welding Process

TASHIRO Shinichi, AOKI Atsuhito, KUROKAWA Hideaki, TANAKA Manabu

Quarterly Journal of the Japan Welding Society　Vol. 38　p. 44s-48s　2020/04　Research paper (scientific journal)

Influence of Welding Materials of Duplex Current Feeding MIG Welding

AOKI Atsuhito, TASHIRO Shinichi, KUROKAWA Hideaki, TANAKA Manabu

Quarterly Journal of the Japan Welding Society　Vol. 38　p. 16s-20s　2020/04　Research paper (scientific journal)

Influence of shielding gas composition on molten metal flow behavior during plasma keyhole arc welding process

Anh Van Nguyen, Shinichi Tashiro, Manh Huu Ngo, Anh Hoang Le, Hanh Van Bui, Manabu Tanaka

Journal of Manufacturing Processes　Vol. 53　p. 431-437　2020/04　Research paper (scientific journal)

Numerical Prediction of Influence of Gas Species on Gas Convective Pattern of Short Arc Lamp

MAENAKA Shiro, TASHIRO Shinichi, MURPHY Anthony B, FUJITA Kazunori, TANAKA Manabu

Quarterly Journal of the Japan Welding Society　Vol. 38　p. 30s-34s　2020/04　Research paper (scientific journal)

Numerical Simulation of the Behavior of Hydrogen Source in a Novel Welding Process to Reduce Diffusible Hydrogen

Shinichi Tashiro, Naoki Mukai, Yoshihide Inoue, Anthony B. Murphy, Tetsuo Suga, Manabu Tanaka

Materials　Vol. 13　2020/04　Research paper (scientific journal)

Application of pulse plasma MIG welding process to Al/steel dissimilar joining

Sarizam Bin Mamat, Shinichi Tashiro, Mohamad Najmi Masri, Seong Min Hong, Hee-Seon Bang, Manabu Tanaka

Welding in the World　Vol. 64　p. 857-871　2020/03　Research paper (scientific journal)

Analysis of heat transfer and material flow in hybrid KPAW-GMAW process based on the novel three dimensional CFD simulation

Dongsheng Wu, Shinichi Tashiro, Ziang Wu, Kazufumi Nomura, Xueming Hua, Manabu Tanaka

International Journal of Heat and Mass Transfer　Vol. 147　2020/02/01　Research paper (scientific journal)

Study on the Decoupled Transfer of Heat and Mass in Wire Variable Polarity Plasma Arc Welding

Fan Jiang, Cheng Li, Bin Xu, Shinichi Tashiro, Manabu Tanaka, Shujun Chen

Materials　Vol. 13　2020/02　Research paper (scientific journal)

Influence of Electrode Energy Balance on Gas Convective Pattern of a High-Pressure Xenon Short Arc Lamp

Shiro Maenaka, Shinichi Tashiro, Anthony B. Murphy, Kazunori Fujita, Manabu Tanaka

Plasma Chemistry and Plasma Processing　Vol. 40　p. 819-837　2020/02　Research paper (scientific journal)

The Effect of Cold Cracking Prevention of FCAW by the Welding Process for Reducing Diffusible Hydrogen

Naoki MUKAI, Yoshihide INOUE, Shinichi TASHIRO, Tetsuo SUGA, Manabu TANAKA

Journal of Smart Processing　Vol. 9　No. 1　p. 35-39　2020/01　Research paper (scientific journal)

Numerical study on arc-droplet coupled behavior in magnetic field controlled GMAW process

Lei Xiao, Ding Fan, Jiankang Huanga, Shinichi Tashiro, Manabu Tanaka

Journal of Physics D: Applied Physics　2019/12　Research paper (scientific journal)

Material flow analyses of high-efficiency joint process in VPPA keyhole flat welding by X-ray transmission system

Bin Xu, Shujun Chen, Shinichi Tashiro, Fan Jiang, Van anh nguyen, Manabu Tanaka

Journal of Cleaner Production　Vol. 250　2019/12　Research paper (scientific journal)

Reduction of Blowholes in DC Modulated TIG Welding for Copper

Toshifumi Yuji, Noritsugu Kamata, Hiroyuki Kinoshita, Kentaro Yasui, Toshio Bouno, Kouji Kamei, Sarizam Mamat, Shinichi Tashiro, Manabu Tanaka

International Journal of Advanced Science and Technology　Vol. 28　No. 18　p. 88-93　2019/12　Research paper (scientific journal)

Influence of shielding gas on cathode spot behaviours in alternating current tungsten inert gas welding of aluminium

Le Huy PHAN, Shinichi TASHIRO, Hanh Van BUI, Tetsuo SUGA, Toyoyuki SATO, Manabu TANAKA

Science and Technology of Welding and Joining　Vol. 25　p. 258-264　2019/11　Research paper (scientific journal)

Development of advanced control technology of plasma-MIG processand application to dissimilar joining

Seong Min HONG, Shinichi TASHIRO, Mamat Bin SARIZAM, Manabu TANAKA, Yuichiro KOIZUMI

ICMaSS 2019　2019/11　Research paper (international conference proceedings)

Influence of Current Feeding Position of Duplex Current Feeding MIGWelding on Droplet Heat Quantity

Atsuhito AOKI, Shinichi TASHIRO, Hideaki KUROKAWA, Manabu TANAKA

Materials　Vol. 12　2019/10　Research paper (scientific journal)

Influence of the magnesium content on cathode spot behavior in AC TIG welding of aluminum alloy

PHAN Huy Le, TASHIRO Shinichi, BUI Van Hanh, TANAKA Manabu

Quarterly Journal of Japan Welding Society　Vol. 37　No. 4　p. 181-186　2019/10　Research paper (scientific journal)

Simulation Technology to Quantify Arc Interruption Phenomena

MORICHI Takahiro, HAMA Kai, ITODA Shuichi, TASHIRO Shinichi, TANAKA Manabu, Anthony Bruce MURPHY

OMRON TECHNICS　Vol. 52　No. 2　p. 1-6　2019/10　Research paper (scientific journal)

プラズマミグによる鉄/アルミニウムのろう付けプロセス

田代 真一

ぶれいず　Vol. 53　No. 124　p. 9-14　2019/10

Development of Novel MIG Welding Process with Duplex Current Feeding

Atsuhito AOKI, Shinichi TASHIRO, Hideaki KUROKAWA, Manabu TANAKA

Journal of Manufacturing Processes　Vol. 47　p. 74-82　2019/10　Research paper (scientific journal)

The effect of electrode energy balance on variable polarity plasma arc pressure

Bin Xu, Shinichi Tashiro, Fan Jiang, Manabu Tanaka, Shujun Chen

Journal of Manufacturing Processes　Vol. 145　p. 118715-118728　2019/09　Research paper (scientific journal)

Optical Measurement of Surface Temperature Distribution of Weld Pool in AC Tungsten Inert Gas Welding of Aluminum A1050

Quang Ngoc TRINH, Huy Le PHAN, Shinichi TASHIRO, Van Hanh BUI, Manabu TANAKA

Journal of Smart Processing　Vol. 8　No. 5　p. 213-218　2019/09　Research paper (scientific journal)

Numerical Simulation of Gas Flow in a Novel Torch for Reducing Diffusible Hydrogen

Shinichi TASHIRO, Naoki MUKAI, Yoshihide INOUE, Anthony B. MURPHY, Tetsuo SUGA, Manabu TANAKA

Journal of Smart Processing　Vol. 8　No. 5　p. 219-224　2019/09　Research paper (scientific journal)

In-situ observation of keyhole detouring flow in VPPA flat welding of aluminum alloy by X-ray transmission system and tracer particles

Bin Xu, Shujun Chen, Fan Jiang, Shinichi Tashiro, Van anh nguyen, Manabu Tanaka

The 72nd IIW Annual Assembly & International Conference　2019/07　Research paper (international conference proceedings)

Analysis of the coupled interaction of arc, droplet, keyhole and weld pool in the hybrid KPAW-P-GMAW process

Dongsheng Wu, Shinichi Tashiro, Ziang Wu, Kazufumi Nomura, Xueming Hua, Manabu Tanaka

The 72nd IIW Annual Assembly & International Conference　2019/07　Research paper (international conference proceedings)

Numerical simulation of gas flow in a novel torch for reducing diffusible hydrogen

Shinichi TASHIRO, Naoki MUKAI, Yoshihide INOUE, Anthony B. MURPHY, Tetsuo SUGA, Manabu TANAKA

The 72nd IIW Annual Assembly & International Conference　2019/07　Research paper (international conference proceedings)

A simplified numerical model of metal transfer phenomena for highcurrent GMAW process

Lei Xiao, Ding Fan, Jiankang Huang, Shinichi Tashiro, Manabu Tanaka

The 72nd IIW Annual Assembly & International Conference　2019/07　Research paper (international conference proceedings)

Analysis of the energy propagation in the keyhole plasma arc weldingusing a novel fully coupled plasma arc-keyhole-weld pool model

Dongsheng Wu, Shinichi Tashiroa, Xueming Hua, Manabu Tanaka

International Journal of Heat and Mass Transfer　Vol. 141　p. 604-614　2019/07　Research paper (scientific journal)

Undercut Formation Mechanism in Keyhole Plasma Arc Welding

A. V. Nguyen, D. Wu, S. Tashiro, M. Tanaka

WELDING JOURNAL　Vol. 98　p. 204-s-212-s　2019/07　Research paper (scientific journal)

Modeling of Xenon Short Arc Lamp Considering Behavior of Tungsten Vapour Evaporated from Electrodes

Shiro Maenaka, Shinichi Tashiro, Anthony Tony B Murphy, Kazunobu Fujita, Manabu Tanaka

Journal of Physics D: Applied Physics　Vol. 52　p. 334001 (15pp)-334001 (15pp)　2019/05　Research paper (scientific journal)

Investigation on cathode spot behavior in argon AC TIG welding of aluminum through experimental observation

Le Huy PHAN, Shinichi TASHIRO, Hanh Van BUI, Tetsuo SUGA, Toyoyuki SATO, Manabu TANAKA

Journal of Physics D: Applied Physics　Vol. 52　No. 26　p. 26LT02 (8pp)-26LT02 (8pp)　2019/04　Research paper (scientific journal)

Effect of Arc Pressure on the Digging Process in Variable Polarity Plasma Arc Welding of A5052P Aluminum Alloy

Bin Xu, Shinichi Tashiro, Fan Jiang, Shujun Chen, ManabuTanaka

Materials　Vol. 12　p. 1071 (17pp)-1071 (17pp)　2019/04　Research paper (scientific journal)

The influence mechanism of variable polarity plasma arc pressure on flat keyhole welding stability

Bin Xu, Shujun Chen, Fan Jiang, Huy Le Phan, Shinichi Tashiro, Manabu Tanaka

Journal of Manufacturing Processes　Vol. 37　p. 519-528　2019/02　Research paper (scientific journal)

A novel electrode-arc-weld pool model for studying the keyhole formation in the keyhole plasma arc welding process

Dongsheng Wu, Shinichi Tashiro, Xueming Hua, Manabu Tanaka

Journal of Physics D: Applied Physics　Vol. 52　No. 16　p. 165203-165203　2019/01　Research paper (scientific journal)

Elucidation of the weld pool convection and keyhole formation mechanism in the keyhole plasma arc welding

Dongsheng Wu, Anh Van Nguyen, Shinichi Tashiro, Xueming Hua, Manabu Tanaka

International Journal of Heat and Mass Transfer　Vol. 131　p. 920-931　2018/11　Research paper (scientific journal)

Behaviors of Cathode Spot in Alternative Current Helium TIG Welding of Aluminum

Huy Le PHAN, Shinichi TASHIRO, Van Hanh BUI, Manabu TANAKA

Journal of Smart Processing　Vol. 7　No. 6　p. 243-250　2018/11　Research paper (scientific journal)

Numerical simulation of fume formation process in GMA welding

Shinichi Tashiro, Anthony B. Murphy, Manabu Tanaka

Welding in the World　Vol. 62　No. 6　p. 1331-1339　2018/09　Research paper (scientific journal)

Influence of Welding Current on Formation of Weld Bead in TIG Welding for Joining Thin Plates

Nguyen Van Anh, Murata Akihisa, Murata Tadasuke, Shinichi Tashiro, Manabu Tanaka

Advanced Engineering Forum　Vol. 29　p. 1-11　2018/08　Research paper (scientific journal)

Numerical analysis of arc characteristics in CO2 arc welding

2018/07　Research paper (international conference proceedings)

Investigation of cathode spot behavior in AC TIG welding of aluminum through observation

2018/07　Research paper (international conference proceedings)

Evaluation of Tungsten Vapor Behavior in Xenon Short Arc Lamp Using Numerical Simulation

J. Illum. Engng. Inst. Jpn.　Vol. 102　No. 6　p. 20-225　2018/06　Research paper (scientific journal)

Study on factors affecting the droplet temperature in plasma MIG welding process

Sarizam Bin Mamat, Shinichi Tashiro, Manabu Tanaka, Mahani Yusoff

Journal of Physics D: Applied Physics　Vol. 51　No. 13　p. 135206 (23pp)-135206 (23pp)　2018/03/12　Research paper (scientific journal)

Numerical analysis of plasma arc physical characteristics under additional constraint of keyhole

Bin Xu, Fan Jiang, Shujun Chen, Manabu Tanaka, Shinichi Tashiro, Nguyen Van Anh

Chinese Physics B　Vol. 27　No. 3　p. 34701-1-34701-8　2018/03/01　Research paper (scientific journal)

Behavior of Exit Keyhole Diameter during Switch off Period in Plasma Keyhole Arc Welding

Anh Nguyen Van, Tashiro Shinichi, Huu Manh Ngo, Akihisa Murata, Tadasuke Murata, Manabu Tanaka

Advanced Engineering Forum　Vol. 26　p. 87-92　2018/02　Research paper (scientific journal)

Experimental investigation on the weld pool formation process in plasma keyhole arc welding

Nguyen Van Anh, Shinichi Tashiro, Bui Van Hanh, Manabu Tanaka

JOURNAL OF PHYSICS D-APPLIED PHYSICS　Vol. 51　No. 1　2018/01　Research paper (scientific journal)

Droplet Temperature Measurement in Metal Inert Gas Welding Process by Using Two Color Temperature Measurement Method

Sarizam Bin Mamat, Titinan Methong, Shinichi Tashiro, Manabu Tanaka

Quarterly Journal of Japan Welding Society　Vol. 35　No. 2　p. 160s-164s　2017/12　Research paper (scientific journal)

Influence of Welding Current on Molten Pool Flow during Plasma Keyhole Arc Welding

Nguyen Van Anh, Ngo Huu Manh, Bui Van Hanh, S. Tashiro, M. Tanaka

Proceedings of The 3rd International Workshop on Welding and Joining (IWWJ) 2017　p. 56-59　2017/11　Research paper (international conference proceedings)

Single Pass Full Penetration Welding of 12-mm Thick Mild Steel with Square Edge Preparation Using Plasma - MIG Hybrid Welding Process

Lam TRAN, Shinichi TASHIRO, Manabu TANAKA, Thuc Ha NGUYEN

Frontier of Applied Plasma Technology　Vol. 10　No. 2　p. 65-70　2017/11　Research paper (scientific journal)

Development of Plasma-MIG Hybrid Welding Process

Nguyen Van Anh, Shinichi Tashiro, Bui Van Hanh, Manabu Tanaka

Quarterly Journal of Japan Welding Society　Vol. 35　No. 2　p. 132s-136s　2017/09　Research paper (scientific journal)

Development of Plasma-Mig Hybrid Welding Process for Butt Joint Welding of Thick Plate Steel

Lam Tran, Van Anh Nguyen, Shinichi Tashiro, Manabu Tanaka, Thuc Ha Nguyen

Vol. 119　p. 11-15　2017/05　Research paper (scientific journal)

Numerical analysis of plasma arc physical characteristics under additional constraint of keyhole

Bin Xu, Fan Jiang, Manabu Tanaka, Shinichi Tashiro, Nguyen Van Anh, Shujun Chen

2017/04　Research paper (international conference proceedings)

Numerical simulation of fume formation process in GMA welding

Shinichi Tashiro, Anthony B. Murphy, Manabu Tanaka

2017/04　Research paper (international conference proceedings)

Influence of Pilot Gas Composition on Convective Pattern on Weld Pool Surface in Plasma Keyhole Arc Welding

Nguyen Van Anh, Shinichi Tashiro, Bui Van Hanh, Manabu Tanaka

Quarterly Journal of Japan Welding Society　Vol. 35　No. 2　p. 98s-102s　2017/04　Research paper (scientific journal)

Influence of Preheating on Oxygen Plasma Cutting Process

Shinichi Tashiro, Anh Van Nguyen, Mikio Sadaike, Yoshio Matsumoto, Yoshihiro Yamaguchi, Manabu Tanaka

Quarterly Journal of Japan Welding Society　Vol. 35　No. 2　p. 94s-97s　2017/04　Research paper (scientific journal)

Study on new GMA welding process with duplex current feeding - Influence of welding wire -

Masaru SETO, Manabu TANAKA, Shinichi TASHIRO, Atsuhito AOKI

Quarterly Journal of Japan Welding Society　Vol. 35　No. 2　p. 56s-60s　2017/04　Research paper (scientific journal)

Numerical Analysis on Influence of Electrical Conductivity of Wire on Droplet Temperature in Duplex Current Feeding MIG Welding

Shinichi Tashiro, Manabu Tanaka, Masaru Seto, Atsuhito Aoki

Quarterly Journal of Japan Welding Society　Vol. 35　No. 2　p. 51s-55s　2017/04　Research paper (scientific journal)

Influence of Admixture of Oxygen into Shielding Gas on Cathode Spot Behavior

Toshifumi YUJI, Shinichi TASHIRO, Titinan, METHONG, Hiroyuki KINOSHITA, Kentaro YASUI, Toshio BOUNO, Noritsugu KAMATA,Le Huy PHAN, Manabu TANAKA

Quarterly Journal of Japan Welding Society　Vol. 35　No. 2　p. 47s-50s　2017/04　Research paper (scientific journal)

Observation of Metal Transfer in Plasma MIG Welding Process

Sarizam Bin Mamat, Shinichi Tashiro, Manabu Tanaka

Quarterly Journal of Japan Welding Society　Vol. 35　No. 2　p. 33s-37s　2017/04　Research paper (scientific journal)

Evaluation of Radiation Characteristics of Xenon Short Arc Lamp by Numerical Simulation

Shiro MAENAKA, Shinichi TASHIRO, Anthony B. MURPHY, Kazunori FUJIT, Manabu TANAKA

Journal of Smart Processing　Vol. 6　No. 1　p. 40-45　2017/01　Research paper (scientific journal)

Comparison of wettability of beads in MIG welding process with duplex current feeding and conventional MIG welding process

Masaru SETO, Atsuhito AOKI, Shinichi TASHIRO, Manabu TANAKA

Journal of Smart Processing　Vol. 6　No. 1　p. 28-32　2017/01　Research paper (scientific journal)

Heat Flux and Electromagnetic Force affected by Current Frequency in Argon Pulsed Arc Welding Mixed with Oxygen

Yoshifumi Maeda, Shinji Yamamoto, Toru Iwao, Shinichi Tashiro, Masaya Shigeta, Manabu Tanaka

Proceedings of 10th International Conference on Trends in Welding Research & 9th International Welding Symposium of Japan Welding Society (9WS)　p. 956-959　2016/10　Research paper (international conference proceedings)

Numerical Simulation of Fume Formation Process in GMA Welding

Shinichi Tashiro, Anthony B. Murphy, Manabu Tanaka

Proceedings of 10th International Conference on Trends in Welding Research & 9th International Welding Symposium of Japan Welding Society (9WS)　p. 754-757　2016/10　Research paper (international conference proceedings)

Radiation and Temperature Distribution of Ar Arc Contaminated with Nitrogen in Pulsed TIG Welding

Toru Iwao, Hiroki Takahashi, Yoshifumi Maeda, Shinji Yamamoto, Shinichi Tashiro, Masaya Shigeta, Manabu Tanaka

Proceedings of 10th International Conference on Trends in Welding Research & 9th International Welding Symposium of Japan Welding Society (9WS)　p. 398-401　2016/10　Research paper (international conference proceedings)

Weld pool formation mechanism in plasma keyhole arc welding

Nguyen Anh Van, Shinichi Tashiro, Manabu Tanaka

Proceedings of 10th International Conference on Trends in Welding Research & 9th International Welding Symposium of Japan Welding Society (9WS)　p. 36-39　2016/10　Research paper (international conference proceedings)

Investigation of convective flow on the surface of weld pool in plasma keyhole arc welding

Nguyen Van Anh, Shinichi Tashiro, Manabu Tanaka, Ngo Huu Manh, Bui Van Hanh, Nguyen Thuc Ha

p. 267-271　2016/10　Research paper (international conference proceedings)

Numerical Analysis of Fume Formation Process in GMA Welding

S. Tashiro, A. B. Murphy, M. Tanaka

p. 221-226　2016/10　Research paper (international conference proceedings)

Study on Gas Metal Arc welding processes through visualization

Image Laboratory　Vol. 27　No. 9　p. 38-43　2016/09

Proposal of a Method of Observing Cathode Spots in AC Tungsten Inert Gas Welding

Kentaro YASUI, Hiroyuki KINOSHITA, Toshifumi YUJI, Atsushi FUJIMARU, Toshio BOUNO, Titinan METHONG, Shinichi TASHIRO, Manabu TANAKA

Vol. 1　p. 231-236　2016/08　Research paper (scientific journal)

Observation of weld pool in plasma arc welding

Nguyen Van Anh, Shinichi Tashiro, Manabu Tanaka

69th Annual Assembly of Int. Inst. Welding (IIW)　2016/07　Research paper (international conference proceedings)

Observation of three-dimensional weld pool convection in plasma keyhole arc welding

Nguyen Van Anh, Shinichi Tashiro, Manabu Tanaka

IIW_Intermediate meeting_Genova_March 7-8_2016 (USB)　2016/03　Research paper (international conference proceedings)

Numerical analysis of welding fume formation mechanism

Shinichi Tashiro, Anthony B. Murphy, Manabu Tanaka

IIW_Intermediate meeting_Genova_March 7-8_2016 (USB)　Vol. 2016　p. IIW Doc.I-1256-16, IIW Doc.IV--237　2016/03　Research paper (international conference proceedings)

Study on new GMA welding process with duplex current feeding

Masaru Seto, Atsuhito Aoki, Manabu Tanaka, Shinichi Tashiro, Tetsuo Era

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 34　No. 2　p. 150-157　2016　Research paper (scientific journal)

Numerical simulation of new welding process with duplex current feeding

Shinichi Tashiro, Masaru Seto, Atsuhito Aoki, Manabu Tanaka

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 34　No. 4　p. 223-230　2016　Research paper (scientific journal)

Visualization of Weld Pool Convective Flow in Plasma Keyhole Arc Welding

Nguyen Van Anh, Shinichi Tashiro, Bui Van Hanh, Manabu Tanaka

Frontier of Applied Plasma Technology　Vol. 9　No. 1　p. 1-6　2016/01　Research paper (scientific journal)

Optical Observation of Cathode Spot in AC Tungsten Inert Gas (TIG) Welding on Aluminum Plate using Helium

TASHIRO Shinichi, YUJI Toshifumi, FUJIMARU Atsushi, KINOSHITA Hiroyuki, YASUI Kentaro, BOUNO Toshio, METHONG Titinan, TANAKA Manabu

Trans. JWRI　Vol. 44　No. 2　p. 1-4　2015/12　Research paper (bulletin of university, research institution)

交流TIG溶接における陰極点及び溶融池の時間変化

安井 賢太郎, 藤丸 厚志, 木之下 広幸, 湯地 敏史, 房野 俊夫, Methong Titinan, 田代 真一, 田中 学

プラズマ放電パルスパワー放電合同研究会資料　p. 7-12　2015/10　Research paper (other academic)

X-Ray observation of three dimensional convection in weld pool in plasma keyhole welding

Shinichi Tashiro, Nguyen Van Anh, Manabu Tanaka

p. 19-23　2015/10　Research paper (other academic)

Numerical Simulation on Laser Welding considering Surface Deformation and Convective Heat Transfer

Shinichi Tashiro, Manabu Tanaka, Masataka Tamura, Wataru Kouno

Quarterly J. Japan Welding Soc.　Vol. 33　No. 2　p. 180s-184s　2015/06　Research paper (scientific journal)

Observation of the Behavior of Cathode Spots in AC Tungsten Inert Gas Welding on Aluminum Plate

Toshifumi Yuji, Shinichi Tashiro, Atsushi Fujimaru, Hiroyuki Kinoshita, Kentaro Yasui, Toshio Bouno, Titinan Methong, Manabu Tanaka

Quarterly J. Japan Welding Soc.　Vol. 33　No. 2　p. 135s-138s　2015/06　Research paper (scientific journal)

プラズマ技術とその適用分野 プラズマ技術の総論

田代 真一, 田中 学

エレクトロヒート　Vol. 36　No. 1　p. 78-83　2015/05

アルミニウム板上での交流TIG溶接における陰極点挙動の観察

湯地 敏史, 藤丸 厚志, 安井 賢太郎, 木下 広幸, 房野 俊夫, 田代 真一, 田中 学

プラズマパルスパワー放電合同研究会資料　p. 29-33　2014/10　Research paper (other academic)

Influence of Particle Charging on the Fume Formation Process in Arc Welding

S. Tashiro, A. B. Murphy, M. Tanaka

International WELDING Symposium (IWS 2K14)　p. 93-104　2014/10　Research paper (international conference proceedings)

Study for TIG-MIG hybrid welding process

Shuhei Kanemaru, Tomoaki Sasaki, Toyoyuki Sato, Hisashi Mishima, Shinichi Tashiro, Manabu Tanaka

Welding in the World　Vol. 58　No. 1　p. 11-18　2014/02　Research paper (scientific journal)

Development of plasma MIG brazing process for dissimilar metal joining of aluminum to steel

Shinichi Tashiro, Manabu Tanaka

INTERNATIONAL SYMPOSIUM ON INTERFACIAL JOINING AND SURFACE TECHNOLOGY (IJST2013)　Vol. 61　p. 012018-1-012018-6　2014　Research paper (international conference proceedings)

Development of a GMA Welding Process with Dual Contact Tubes

T. Ikeda, S. Tashiro, M. Tanaka, T. Era

Proceedings of 3rd China-Japan Workshop on Welding Thermo-Physics　p. 89-93　2013/11　Research paper (international conference proceedings)

Numerical Analysis of the Influence of Particle Charging on the Fume Formation Process in Arc Welding

S. Tashiro, A.B. Murphy, S. Matsui, M. Tanaka

Abstract book of the 12th International Conference on Fluid Control, Measurements, and Visualization (FLUCOME2013)　2013/11　Research paper (international conference proceedings)

Visualization of fume formation process in arc welding with numerical simulation

Shinichi Tashiro, Tasuku Zeniya, Anthony B. Murphy, Manabu Tanaka

Surface and Coatings Technology　Vol. 228　No. 1　p. S301-S305　2013/08/15　Research paper (scientific journal)

Influence of metal vapor on current path in arc plasma of TIG-MIG hybrid welding process

TASHIRO Shinichi, MISHIMA Hisashi, TANAKA Manabu, KANAMARU Shuhei

Preprints of the National Meeting of JWS　Vol. 93　p. 68-69　2013/08/12

Metal Vapor and Fume Formation Model

M. Tanaka, S. Tashiro

Welding Guide Book 7 "Visualization and Simulation Technologies for Welding Processes　p. I-60-I-67　2013/07

Arc Welding Process

M. Tanaka, S. Tashiro

Welding Guide Book 7 "Visualization and Simulation Technologies for Welding Processes　p. I-16-I-23　2013/07

Development of a MIG Welding Process with Dual Contact Tubes

T. Ikeda, S. Tashiro, M. Tanaka, T. Era

7th Asia Pacific IIW International Congress 2013　2013/07　Research paper (international conference proceedings)

Influence of Particle Charging on the Fume Formation Process in Arc Welding

TASHIRO Shinichi, MURPHY B. Anthony, TANAKA Manabu

Trans. JWRI　Vol. 42　No. 1　p. 1-9　2013/06　Research paper (bulletin of university, research institution)

Numerical analysis of the influence of particle charging on the fume formation process in arc welding

Shinichi Tashiro, Anthony B. Murphy, Sho Matsui, Manabu Tanaka

JOURNAL OF PHYSICS D-APPLIED PHYSICS　Vol. 46　No. 22　2013/06　Research paper (scientific journal)

Analysis of Plasma Properties in Barrel Type Nitriding System

Shinichi Tashiro, Manabu Tanaka, Yoshimasa Takahashi, Terukazu Tsubota, Kazuo Taneoka, Hiroshi Sakata, Nobuhiro Ueda, Motoo Egawa, Kazuo Kouyama

Journal of the Japan Society for Heat Treatment　Vol. 53　No. 2　p. 41-46　2013/04　Research paper (scientific journal)

A Numerical Model of Fume Formation in MIG Welding Process

S. Tashiro, M. Tanaka

Commissions IV, XII and SG 212 Intermediate Meeting of Int. Inst. Welding (IIW)　2013/04　Research paper (international conference proceedings)

Visualization of Welding and Joining Phenomena with X-ray Transmission Systems

Tashiro Shinichi, Tanaka Manabu

Yosetsu Gakkai Shi/Journal of the Japan Welding Society　Vol. 82　No. 7　p. 505-508　2013　Research paper (scientific journal)

Numerical analysis of influence of quenching rate on coagulation process in welding fume formation

Shinichi Tashiro, Sho Matsui, Manabu Tanaka

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 31　No. 4　p. 31s-34s　2013　Research paper (scientific journal)

Investigation of fume formation mechanism in gas shield arc welding

Sho Matsui, Shinichi Tashiro, Manabu Tanaka

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 31　No. 4　p. 35s-39s　2013　Research paper (scientific journal)

Numerical simulation on plasma property in TIG-MIG hybrid welding process

Hisashi Mishima, Shinichi Tashiro, Shuhei Kanemaru, Manabu Tanaka

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 31　No. 4　p. 22s-25s　2013　Research paper (scientific journal)

Study for TIG-MIG hybrid welding process - Experimental consideration for optimum torch configuration

Shuhei Kanemaru, Tomoaki Sasaki, Toyoyuki Sato, Hisashi Mishima, Shinichi Tashiro, Manabu Tanaka

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 31　No. 4　p. 18s-21s　2013　Research paper (scientific journal)

New development of numerical simulation technology of high current phenomena

Shinichi Tashiro, Manabu Tanaka

IEEJ Transactions on Power and Energy　Vol. 133　No. 5　p. 405-408　2013　Research paper (scientific journal)

Numerical simulation of energy balance of short arc lamp

Manabu Tanaka, Shinichi Tashiro, Yoshihiro Tsujimura, Anthony B. Murphy

IEEJ Transactions on Power and Energy　Vol. 133　No. 5　p. 3-429　2013　Research paper (scientific journal)

State-of-the-art technology in visualization of arc welding process

Tanaka Manabu, Tashiro Shinichi

Yosetsu Gakkai Shi/Journal of the Japan Welding Society　Vol. 82　No. 2　p. 99-104　2013　Research paper (scientific journal)

Visualizations and Predictions of Welding Arcs

TANAKA Manabu, TASHIRO Shinichi, TSUJIMURA Yoshihiro

Trans. JWRI　Vol. 41　No. 2　p. 1-5　2012/12　Research paper (bulletin of university, research institution)

金属蒸気・ヒューム生成モデル

田中 学, 田代 真一

溶接法ガイドブック７「溶接プロセスの可視化・シミュレーション技術」　p. I-63-I-71　2012/11

アーク溶接プロセス

田中 学, 田代 真一

溶接法ガイドブック７「溶接プロセスの可視化・シミュレーション技術」　p. I-18-I-26　2012/11

Report of 9th International Conference on Trends in Welding Research

TASHIRO Shinichi

QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY　Vol. 81　No. 7　p. 607-609　2012/10/05

Numerical simulation of TIG-MIG hybrid welding process

H. Mishima, S. Tashiro, S. Kanemaru, T. Sasaki, T. Sato, M. Tanaka

2nd Int. Symp. Computer-Aided Welding Eng. (CAWE 2012)　2012/08　Research paper (international conference proceedings)

Numerical Calculation of Dynamic Behavior in AC-TIG Welding with Cleaning Action of Oxide Film

M. Tanaka, S. Tashiro

2nd Int. Symp. Computer-Aided Welding Eng. (CAWE 2012)　2012/08　Research paper (international conference proceedings)

Joining Process with Arc Plasma 2. Influence of admixture of metal vapor to arc plasma

TASHIRO Shinichi, TANAKA Manabu

JOURNAL OF PLASMA AND FUSION RESEARCH　Vol. 88　No. 7　p. 383-388　2012/07

Numerical Analysis of Heat Source Properties of Pulsed Tungsten Inert Gas Arc

Tashiro Shinichi, Tanaka Manabu

Transactions of the Materials Research Society of Japan　Vol. 37　No. 2　p. 161-164　2012/07　Research paper (scientific journal)

Study for TIG-MIG Hybrid Welding Process

S. Kanemaru, T. Sasaki, T. Sato, H. Mishima, S. Tashiro, M. Tanaka

65th Annual Assembly of Int. Inst. Welding (IIW)　2012/07　Research paper (international conference proceedings)

Numerical simulation of keyhole welding of aluminium thick plate with plasma arc

Shinichi Tashiro, Manabu Tanaka, Tomoyuki Ueyama, Tetsuo Era

Welding International　Vol. 26　No. 6　p. 441-447　2012/06　Research paper (scientific journal)

Visualizations and Predictions of Welding Arcs

M. Tanaka, S. Tashiro, Y. Tsujimura

Trends in Welding Research: Proceedings of the 9th International Conference on Trends in Welding Research　p. 685-688　2012/06　Research paper (international conference proceedings)

Numerical Model with Arc Length Variarion of Welding Arc with Constant Voltage Power Source

TASHIRO Shinichi, TSUJIMURA Yoshihiro, TANAKA Manabu

Trans. JWRI　Vol. 41　No. 1　p. 7-10　2012/06　Research paper (bulletin of university, research institution)

Dynamic Behavior of Metal Vapor in Arc Plasma during TIG Welding

TANAKA Manabu, TASHIRO Shinichi, TSUJIMURA Yoshihiro

Trans. JWRI　Vol. 41　No. 1　p. 1-6　2012/06　Research paper (bulletin of university, research institution)

Joining Process with Arc Plasma 2. Influence of admixture of metal vapor to arc plasma

TASHIRO Shinichi, TANAKA Manabu

Journal of Plasma and Fusion Research　Vol. 88　No. 6　p. 332-338　2012/06

Joining Process with Arc Plasma 1. Plasma Prperties in Arc Welding

TASHIRO Shinichi, TANAKA Manabu

Journal of Plasma and Fusion Research　Vol. 88　No. 5　p. 276-280　2012/05

Numerical Analysis of AC-TIG Welding of Aluminum with Cleaning Action of Oxide Film

M. Tanaka, S. Tashiro

Commissions IV, XII and SG 212 Intermediate Meeting of Int. Inst. Welding (IIW)　2012/04　Research paper (international conference proceedings)

Spatter reduction in pulsed MAG welding of galvanized steel sheet

UEDA Yuji, NAKAMURA Kazuki, UEZONO Toshiro, YANAGI Keiichiro, IZUTANI Shun, YAMAZAKI Kei, SUZUKI Reiichi, TASHIRO Shinichi, TANAKA Manabu

Preprints of the National Meeting of JWS　Vol. 90　p. 96-97　2012/03/15

Study for the Arc Phenomena of TIG-MIG Hybrid Welding Process by 3D Numerical Analysis Model

Kanemaru Shuhei, Sasaki Tomoaki, Sato Toyoyuki, Mishima Hisashi, Tashiro Shinichi, Tanaka Manabu

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 30　No. 4　p. 323-330　2012　Research paper (scientific journal)

3D Numerical Analysis Model for TIG-MIG Hybrid Welding Process

Kanemaru Shuhei, Sasaki Tomoaki, Sato Toyoyuki, Mishima Hisashi, Tashiro Shinichi, Tanaka Manabu

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 30　No. 4　p. 306-312　2012　Research paper (scientific journal)

Driving force variation in weld pool affected by current density and flow velocity of gas tungsten arc welding

Tadashi Sakai, Hiroyuki Taki, Toru Iwao, Shinichi Tashiro, Manabu Tanaka, Motoshige Yumoto

IEEJ Transactions on Power and Energy　Vol. 132　No. 5　p. 486-492　2012　Research paper (scientific journal)

Numerical simulation of stationary AC tungsten inert gas welding of aluminum plate in consideration of oxide layer cleaning

Shinichi Tashiro, Manabu Tanaka

IEEJ Transactions on Power and Energy　Vol. 132　No. 5　p. 422-427　2012　Research paper (scientific journal)

Modeling of Fume Formation Process in Arc Welding

Tanaka Manabu, Tashiro Shinichi

Transactions of JWRI　Vol. 40　No. 2　p. 21-27　2011/12　Research paper (bulletin of university, research institution)

Numerical modeling of AC tungsten inert gas welding of aluminum plate

Shinichi Tashiro, Manabu Tanaka

Journal of Light Metal Welding　Vol. 49　No. 12　p. 25-30　2011/12　Research paper (scientific journal)

Analysis of Fume Formation Mechanism in Arc Welding with Numerical Simulation

Shinichi Tashiro, Manabu Tanaka

Proceedings of International Seminar on Welding Science and Engineering(WSE2011) & CCWS Seminar　p. 135-136　2011/11　Research paper (international conference proceedings)

Visualization of fume formation process in MIG welding

S. Tashiro, M. Tanaka

Proceedings of Sino-Japanese Workshop on Welding Thermo-Physics　2011/11　Research paper (international conference proceedings)

Effect of metal vapor on gas metal arc for heat source in welding

Y. Tsujimura, S. Tashiro, M. Tanaka

Proceedings of Sino-Japanese Workshop on Welding Thermo-Physics　2011/11　Research paper (international conference proceedings)

Visualization of gas metal arcs in pure argon

M. Tanaka, S. Tashiro, Y. Tsujimura

Proceedings of Sino-Japanese Workshop on Welding Thermo-Physics　2011/11　Research paper (international conference proceedings)

Numerical simulation of heat source properties of pulsed tungsten inert gas arc

K. Ito, S. Tashiro, M. Tanaka

Quarterly J. Japan Welding Soc.　Vol. 29　No. 3　p. 9s-13s　2011/08　Research paper (scientific journal)

A Study on Control of Thermal Plasmas Behavior with a Help of Numerical Simulation, 3. Control of Heat Source Properties of Thermal Plasmas through Design of Gas Composition

TANAKA Manabu, MURPHY Anthony B, TASHIRO Shinichi

Journal of Plasma and Fusion Research　Vol. 87　No. 8　p. 522-527　2011/08

A Study on Control of Thermal Plasmas Behavior with a Help of Numerical Simulation, 2. Electromagnetic Thermal Fluid Model of Thermal Plasmas

WATANABE Takayuki, TASHIRO Shinichi

Journal of Plasma and Fusion Research　Vol. 87　No. 8　p. 514-521　2011/08

A Study on Control of Thermal Plasmas Behavior with a Help of Numerical Simulation, 1. Preface

TASHIRO Shinichi

Journal of Plasma and Fusion Research　Vol. 87　No. 8　p. 512-513　2011/08

Numerical analysis of AC tungsten inert gas welding of aluminum plate in consideration of oxide layer cleaning

Shinichi Tashiro, Minoru Miyata, Manabu Tanaka

THIN SOLID FILMS　Vol. 519　No. 20　p. 7025-7029　2011/08　Research paper (scientific journal)

Visualizations and Predictions of Welding Arcs

M. Tanaka, S. Tashiro, Y. Tsujimura

Proc. IIW Int. Conf. Global Trends in Joining, Cutting and Surfacing Technology　Vol. 41　No. 2　p. 1-5　2011/07　Research paper (international conference proceedings)

Numerical Model of Gas Metal Arc with Metal Vapor for Heat Source in Welding

TSUJIMURA Yoshihiro, TASHIRO Shinichi, TANAKA Manabu

Trans. JWRI　Vol. 40　No. 1　p. 25-29　2011/06　Research paper (bulletin of university, research institution)

Influence of Metal Vapour on Arc Welding -together with discussion on welding fume-

M. Tanaka, S. Tashiro, A.B. Murphy, K. Yamazaki

Commission XII and SG 212 Intermediate Meeting of Int. Inst. Welding (IIW)　2011/03　Research paper (international conference proceedings)

Numerical modeling of thermionic cathode for gas tungsten arc

K. Yamamoto, Y. Tsujimura, S. Tashiro, M. Tanaka

Transactions of the Materials Research Society of Japan　Vol. 35　No. 4　p. 933-936　2011/02　Research paper (scientific journal)

Numerical simulation of welding fume formation mechanism in gas tungsten arc welding

Tasuku Zeniya, Shinichi Tashiro, Kentaro Yamamoto, Manabu Tanaka, Kazuhiro Nakata, Eri Yamamoto, Kei Yamazaki, Keiichi Suzuki

Transactions of the Materials Research Society of Japan　Vol. 35　No. 4　p. 801-804　2011/02　Research paper (scientific journal)

Numerical analysis on effects of power source characteristics on arc properties in gas tungsten arc

Yoshihiro Tsujimura, Shinichi Tashiro, Manabu Tanaka

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 29　No. 3　p. 1s-4s　2011　Research paper (scientific journal)

Experimental observation of cleaning action of cathode spots in AC TIG welding of aluminum plates

Shinichi Tashiro, Hiroshi Sawato, Manabu Tanaka

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 29　No. 3　p. 180-181　2011　Research paper (scientific journal)

Improvement of bead formation of plasma MIG welding in pure argon atmosphere

Tsubasa Katayama, Shimchi Tashiro, Manabu Tanaka

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 29　No. 3　p. 39s-42s　2011　Research paper (scientific journal)

Measurement of dynamical variation in two-dimensional temperature distribution of TIG pulsed-arcs

Hiroshi Sawato, Shinichi Tashiro, Kazuhiro Nakata, Manabu Tanaka, Eri Yamamoto, Kei Yamazaki, Keiichi Suzuki

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 29　No. 3　p. 23s-26s　2011　Research paper (scientific journal)

Modeling of temperature distribution with metal vapor in pulsed TIG including influence of gas flow velocity affected by radiation absorption

Toru Iwao, Yusuke Mori, Tadashi Sakai, Hiroyuki Taki, Takuya Shimokura, Shinichi Tashiro, Manabu Tanaka, Motoshige Yumoto

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 29　No. 3　p. 19s-22s　2011　Research paper (scientific journal)

Numerical analysis of weld pool formation mechanism in TIG welding in consideration of influence of emitter material adding to tungsten cathode

Tasuku Zeniya, Shinichi Tashiro, Manabu Tanaka, Eri Yamamoto, Kei Yamazaki, Keiichi Suzuki

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 29　No. 3　p. 14s-18s　2011　Research paper (scientific journal)

Modeling of temperature distribution with metal vapour in pulsed TIG including influence of radiative absorption

Toru Iwao, Yusuke Mori, Tadashi Sakai, Hiroyuki Taki, Takuya Shimokura, Shinichi Tashiro, Manabu Tanaka, Motoshige Yumoto

Trans. JWRI　Vol. 39　No. 2　p. 346-348　2010/12　Research paper (bulletin of university, research institution)

Development of plasma MIG brazing process of advanced materials

Shinichi Tashiro, Tsubasa Katayama, Manabu Tanaka

Trans. JWRI　Vol. 39　No. 2　p. 314-315　2010/12　Research paper (bulletin of university, research institution)

Improvement of bead formation in plasma MIG welding process in pure argon atmosphere

Tsubasa Katayama, Shinichi Tashiro, Manabu Tanaka

Trans. JWRI　Vol. 39　No. 2　p. 195-196　2010/12　Research paper (bulletin of university, research institution)

Measurement of dynamical variation in two-dimensional temperature distribution of TIG pulsed-arcs

Hiroshi Sawato, Shinichi Tashiro, Kazuhiro Nakata, Manabu Tanaka, Eri Yamamoto, Kei Yamazaki, Keiichi Suzuki

Trans. JWRI　Vol. 39　No. 2　p. 193-194　2010/12　Research paper (bulletin of university, research institution)

Numerical analysis of weld pool formation mechanism in TIG welding in consideration of influence of emitter material adding to tungsten cathode

Tasuku Zeniya, Shinichi Tashiro, Manabu Tanaka, Eri Yamamoto, Kei Yamazaki, Keiichi Suzuki

Trans. JWRI　Vol. 39　No. 2　p. 182-184　2010/12　Research paper (bulletin of university, research institution)

Numerical simulation of heat source properties of pulsed tungsten inert gas arc

Kuniyoshi Ito, Shinichi Tashiro, Manabu Tanaka

Trans. JWRI　Vol. 39　No. 2　p. 182-183　2010/12　Research paper (bulletin of university, research institution)

Experimental observation of cleaning action of cathode spots in AC TIG welding of aluminum plates

Shinichi Tashiro, Hiroshi Sawato, Manabu Tanaka

Trans. JWRI　Vol. 39　No. 2　p. 180-181　2010/12　Research paper (bulletin of university, research institution)

Numerical analysis on effects of power source characteristics on arc properties in gas tungsten arc

Yoshihiro Tsujimura, Shinichi Tashiro, Manabu Tanaka

Trans. JWRI　Vol. 39　No. 2　p. 178-179　2010/12　Research paper (bulletin of university, research institution)

Numerical analysis of non-equilibrium plasma property in anode boundary layer of argon Gas Tungsten Arc

Shinichi Tashiro, Manabu Tanaka, Anthony B. Murphy

SURFACE & COATINGS TECHNOLOGY　Vol. 205　p. S115-S119　2010/12　Research paper (scientific journal)

Modelling of arc welding: The importance of including the arc plasma in the computational domain

Anthony B. Murphy, Manabu Tanaka, Kentaro Yamamoto, Shinichi Tashiro, John J. Lowke, Kostya Ostrikov

Vacuum　Vol. 85　No. 5　p. 579-584　2010/11/09　Research paper (international conference proceedings)

Time-dependent calculations of molten pool formation and thermal plasma with metal vapour in gas tungsten arc welding

M. Tanaka, K. Yamamoto, S. Tashiro, K. Nakata, E. Yamamoto, K. Yamazaki, K. Suzuki, A. B. Murphy, J. J. Lowke

JOURNAL OF PHYSICS D-APPLIED PHYSICS　Vol. 43　No. 43　2010/11　Research paper (scientific journal)

Numerical analysis of fume formation mechanism in arc welding

Shinichi Tashiro, Tasuku Zeniya, Kentaro Yamamoto, Manabu Tanaka, Kazuhiro Nakata, Anthony B. Murphy, Eri Yamamoto, Kei Yamazaki, Keiichi Suzuki

JOURNAL OF PHYSICS D-APPLIED PHYSICS　Vol. 43　No. 43　2010/11　Research paper (scientific journal)

Modelling of metal vapour in pulsed TIG including influence of self-absorption

Iwao, Toru, Mori, Yusuke, Okubo, Masato, Sakai, Tadashi, Tashiro, Shinichi, Tanaka, Manabu, Yumoto, Motoshige

JOURNAL OF PHYSICS D-APPLIED PHYSICS　Vol. 43　No. 43　2010/11　Research paper (scientific journal)

Report of International Conference on Computational & Experimental Engineering 2010 (ICCES2010)

TASHIRO Shinichi

QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY　Vol. 79　No. 7　p. 677-679　2010/10/05

Number Density Distributions of Metal Vapor in Helium Gas Tungsten Arcs

Y. Tsujimura, H. Terasaki, S. Tashiro, M. Tanaka

Transactions of the Materials Research Society of Japan　Vol. 35　No. 3　p. 593-596　2010/10　Research paper (scientific journal)

Numerical analysis of basic property of keyhole welding with plasma arc

Shinichi Tashiro, Minoru Miyata, Manabu Tanaka, Kenei Shin, Kuniaki Takahashi

Transactions of the Materials Research Society of Japan　Vol. 35　No. 3　p. 589-592　2010/10　Research paper (scientific journal)

Numerical analysis of keyhole welding of mild steel plate with plasma arc

Shinichi Tashiro, Minoru Miyata, Manabu Tanaka, Kenei Shin, Kuniaki Takahashi

Trans. JWRI　Vol. 39　No. 1　p. 27-31　2010/09　Research paper (bulletin of university, research institution)

Non-equilibrium plasma property of ArGTA in low current range

Shinichi Tashiro, Manabu Tanaka

THIN SOLID FILMS　Vol. 518　No. 13　p. 3453-3456　2010/04　Research paper (scientific journal)

Numerical simulation of keyhole welding of thick aluminum plate employing plasma arc

Shinichi Tashiro, Manabu Tanaka, Tomoyuki Ueyama, Tetsuo Era

Journal of Light Metal Welding & Construction　Vol. 48　No. 4　p. 119-124　2010/04　Research paper (scientific journal)

The measurement of metal droplet temperature in GMA welding by infrared two-colour pyrometry

Kei Yamazaki, Eri Yamamoto, Keiichi Suzuki, Fusaki Koshiishi, Kenji Waki, Shinichi Tashiro, Manabu Tanaka, Kazuhiro Nakata

Welding International　Vol. 24　No. 2　p. 81-87　2010　Research paper (scientific journal)

Numerical analysis of fume formation mechanism in TIG welding

Shinich Tashiro, Tasuku Zeniya, Kentaro Yamamoto, Manabu Tanaka, Kazuhiro Nakata, B.Anthony Murphy, Eri Yamamoto, Kei Yamazaki, Keiichi Suzuki

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 28　No. 4　p. 369-375　2010　Research paper (scientific journal)

Measurement of surface temperature of weld pools by infrared two colour pyrometry

K. Yamazaki, E. Yamamoto, K. Suzuki, F. Koshiishi, S. Tashiro, M. Tanaka, K. Nakata

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING　Vol. 15　No. 1　p. 40-47　2010/01　Research paper (scientific journal)

Visualizations of 2D Temperature Distribution of Molten Metal in Arc Welding Process

TANAKA Manabu, WAKI Kenji, TASHIRO Shinichi, NAKATA Kazuhiro, YAMAMOTO Eri, YAMAZAKI Kei, SUZUKI Keiich

Trans. JWRI　Vol. 38　No. 2　p. 1-4　2009/12　Research paper (bulletin of university, research institution)

Simulating effects of gas flow on arc plasma to anode heat transfer during incinerator ash treatment

Toshihiro Shimizu, Shinichi Tashiro, Manabu Tanaka, Tsuginori Inaba

THIN SOLID FILMS　Vol. 518　No. 3　p. 952-956　2009/12　Research paper (scientific journal)

Numerical analysis of welding fume formation mechanism in arc welding

Tasuku Zeniya, Shinichi Tashiro, Kentaro Yamamoto, Manabu Tanaka, Kazuhiro Nakata, Eri Yamamoto, Kei Yamazaki, Keiichi Suzuki

Proceedings of International Conference on Welding Science and Engineering, 2009　p. 90-95　2009/11　Research paper (international conference proceedings)

Numerical analysis of basic property of plasma arc welding

Shinichi Tashiro, Minoru Miyata, Manabu Tanaka, Kenei Shin, Kuniaki Takahashi

Proceedings of International Conference on Welding Science and Engineering　p. 41-46　2009/11　Research paper (international conference proceedings)

Modelling of thermal plasmas for arc welding: the role of the shielding gas properties and of metal vapour

A. B. Murphy, M. Tanaka, K. Yamamoto, S. Tashiro, T. Sato, J. J. Lowke

JOURNAL OF PHYSICS D-APPLIED PHYSICS　Vol. 42　No. 19　2009/10　Research paper (scientific journal)

Numerical Analysis of Current Attachment at Thermionic Cathode for Gas Tungsten Arc at Atmospheric Pressure

YAMAMOTO Kentaro, TASHIRO Shinichi, TANAKA Manabu

Trans. JWRI　Vol. 38　No. 1　p. 1-5　2009/09　Research paper (bulletin of university, research institution)

Frequency Dependency of Heat Transfere to Anode in Pulsed Arc Welding

T. Sakai, T. Iwao, M. Yumoto, S. Tashiro, M. Tanaka

Proc. IIW Int. Conf. Advances in Welding and Allied Tech.　Vol. 53　No. SPECIAL ISSUE　p. 47-52　2009/07　Research paper (international conference proceedings)

Behavior of Metal Vapor and Radiation Power in Pulsed TIG Welding

Y. Mori, T. Iwao, S. Tashiro, M. Tanaka, M. Yumoto

Proc. IIW Int. Conf. Advances in Welding and Allied Tech.　Vol. 53　No. SPECIAL ISSUE　p. 25-30　2009/07　Research paper (international conference proceedings)

Effects of Metal Vapor on Shape and Temperature of Weld Pool in TIG Welding

K. Yamamoto, M. Tanaka, S. Tashiro, K. Nakata, E. Yamamoto, K. Yamazaki, K. Suzuki, A.B. Murphy, J.J. Lowke

62nd Annual Assembly of Int. Inst. Welding (IIW)　2009/07　Research paper (international conference proceedings)

Measurements and Visualizations of 2D Temperature of Arc Plasma from a Monochromator with High-speed Video Camera

M. Tanaka, H. Sawato, S. Tashiro, K. Nakata, E. Yamamoto, K. Yamazaki, K. Suzuki

62nd Annual Assembly of Int. Inst. Welding (IIW)　2009/07　Research paper (international conference proceedings)

Heat Input Characteristic of Tube Cathode Arc

Y. Yamazaki, M. Nakatani, M. Tanaka, S. Tashiro

Welding Guide Book 6 "Developments in Advanced Welding Processes"　2009/07

Modeling of Metal Vapor in Ar and He TIG Welding

K. Yamamoto, M. Tanaka, S. Tashiro, K. Nakata, K. Yamazaki, E. Yamamoto, K. Suzuki

Welding Guide Book 6 "Developments in Advanced Welding Processes"　2009/07

Energy Source Property of Helium Gas Tungsten Arcs with Metal Vapor

S. Tashiro, M. Tanaka, K. Nakata

Welding Guide Book 6 "Developments in Advanced Welding Processes"　2009/07

Effects of Welding Process Parameters on Fume Emission in Gas Metal Arc Welding

K. Yamazaki, E. Yamamoto, K. Suzuki, F. Koshiishi, S. Tashiro, M. Tanaka, K. Nakata

Welding Guide Book 6 "Developments in Advanced Welding Processes"　2009/07

Heat and Mass Transfer in Weld Pool

M. Tanaka, S. Tashiro

Welding Guide Book 6 "Developments in Advanced Welding Processes"　p. I82-I86　2009/07

Non-Consumable Electrodes

M. Tanaka, S. Tashiro

Welding Guide Book 6 "Developments in Advanced Welding Processes"　p. I74-I77　2009/07

Plasma Properties in Arcs

M. Tanaka, S. Tashiro

Welding Guide Book 6 "Developments in Advanced Welding Processes"　p. I70-I73　2009/07

TIG Welding

M. Tanaka, S. Tashiro

Welding Guide Book 6 "Developments in Advanced Welding Processes"　p. I40-I44　2009/07

Metal Vapor Behavior in GTA Welding of a Stainless Steel Considering the Marangoni Effect

Kentaro Yamamoto, Manabu Tanaka, Shinichi Tashiro, Kazuhiro Nakata, Anthony B. Murphy

IEEJ TRANSACTIONS ON ELECTRICAL AND ELECTRONIC ENGINEERING　Vol. 4　No. 4　p. 497-503　2009/07　Research paper (scientific journal)

A computational investigation of the effectiveness of different shielding gas mixtures for arc welding

A. B. Murphy, M. Tanaka, S. Tashiro, T. Sato, J. J. Lowke

JOURNAL OF PHYSICS D-APPLIED PHYSICS　Vol. 42　No. 11　2009/06　Research paper (scientific journal)

The Surface Temperature Measurement of Weld Pool by Infrared Two-Color Pyrometry

K. Yamazaki, E. Yamamoto, K. Suzuki, F. Koshiishi, S. Miyazako, S. Tashiro, M. Tanaka, K. Nakata

Quarterly J. Japan Welding Soc.　Vol. 27　No. 1　p. 34-40　2009/02　Research paper (scientific journal)

Numerical simulation of diffusion of multiple metal vapours in a TIG arc plasma for welding of stainless steel

Kentaro Yamamoto, Manabu Tanaka, Shinichi Tashiro, Kazuhiro Nakata, Eri Yamamoto, Kei Yamazakl, Keiichi Suzuki, Anthony B. Murphy, John J. Lowke

Welding in the World　Vol. 53　No. 7-8　p. R166-R170　2009　Research paper (scientific journal)

Influence of hydrogen induced thermal pinch on nanoparticle formation in arc plasma

Junichi Noma, Hiroya Abe, Makio Naito, Kentaro Yamamoto, Shinichi Tashiro, Manabu Tanaka

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 27　No. 2　p. 13s-16s　2009　Research paper (scientific journal)

Observation of arc phenomena in plasma GMA welding process

Kozuru Tetsuji, Tanaka Manabu, Tashiro Shinichi, Nakata Kazuhiro

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 27　No. 2　p. 42s-44s　2009　Research paper (scientific journal)

Effects of metal vapor for temperature distribution of transient arc in Pulsed TIG welding

Yusuke Mori, Toru Iwo, Motoshige Yumoto, Shinichi Tashiro, Manabu Tanaka

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 27　No. 2　p. 8s-12s　2009　Research paper (scientific journal)

Numerical analysis of metal vapor behavior with multi-diffusion system in TIG welding of stainless steel

Kentaro Yamamoto, Manabu Tanaka, Shinichi Tashiro, Kazuhiro Nakata, Kei Yamazaki, Eri Yamamoto, Keiichi Suzuki, A. B. Murphy

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 27　No. 2　p. 4s-7s　2009　Research paper (scientific journal)

Numerical simulation of AC plasma arc welding

Tashiro Shinichi, Miyata Minoru, Tanaka Manabu

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 27　No. 2　p. 1s-3s　2009　Research paper (scientific journal)

Numerical simulation of diffusion of multiple metal vapours in a TIG arc plasma for welding of stainless steel

Kentaro Yamamoto, Manabu Tanaka, Shinichi Tashiro, Kazuhiro Nakata, Eri Yamamoto, Kei Yamazakl, Keiichi Suzuki, Anthony B. Murphy, John J. Lowke

Welding in the World　Vol. 53　No. 7-8　p. R166-R170　2009　Research paper (scientific journal)

Metal vapour behaviour in thermal plasma of gas tungsten arcs during welding

K. Yamamoto, M. Tanaka, S. Tashiro, K. Nakata, K. Yamazaki, E. Yamamoto, K. Suzuki, A. B. Murphy

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING　Vol. 13　No. 6　p. 566-572　2008/09　Research paper (scientific journal)

Two-Temperature Plasma Modeling of Argon Gas Tungsten Arcs

TASHIRO Shinichi, TANAKA Manabu

Trans. JWRI　Vol. 37　No. 1　p. 7-11　2008/09　Research paper (bulletin of university, research institution)

Numerical simulation of argon twin torch plasma arc for high heating efficiency

Iwao, Toru, Iwase, Keiichiro, Tashiro, Shinichi, Tanaka, Manabu, Yumoto, Motoshige

VACUUM　Vol. 83　No. 1　p. 34-38　2008/09　Research paper (scientific journal)

Numerical simulation of metal vapor behavior in arc plasma

K. Yamamoto, M. Tanaka, S. Tashiro, K. Nakata, K. Yamazaki, E. Yamamoto, K. Suzuki, A. B. Murphy

SURFACE & COATINGS TECHNOLOGY　Vol. 202　No. 22-23　p. 5302-5305　2008/08　Research paper (scientific journal)

Effect of admixture of metal vapor on cathode surface temperature of plasma torch

Shinichi Tashiro, Manabu Tanaka

SURFACE & COATINGS TECHNOLOGY　Vol. 202　No. 22-23　p. 5255-5258　2008/08　Research paper (scientific journal)

Characteristics of ionized gas metal arc processing

M. Tanaka, T. Tamaki, S. Tashiro, K. Nakata, T. Ohnawa, T. Ueyama

SURFACE & COATINGS TECHNOLOGY　Vol. 202　No. 22-23　p. 5251-5254　2008/08　Research paper (scientific journal)

The Measurement of Metal Droplet Temperature in GMA Welding by Infrared Two-Color Pyrometry

K. Yamazaki, E. Yamamoto, K. Suzuki, F. Koshiishi, K. Waki, S. Tashiro, M. Tanaka, K. Nakata

Quarterly J. Japan Welding Soc.　Vol. 26　No. 3　p. 214-219　2008/08　Research paper (scientific journal)

Electron temperature measurement of tungsten inert gas arcs

Manabu Tanaka, Shinichi Tashiro

THIN SOLID FILMS　Vol. 516　No. 19　p. 6628-6633　2008/08　Research paper (scientific journal)

Temperature distribution of argon gas tungsten arc considering the nonequilibrium effect

Shinichi Tashiro, Tom Iwao, Tuginori Inaba, Anthony B. Murphy, Manabu Tanaka

IEEE TRANSACTIONS ON PLASMA SCIENCE　Vol. 36　No. 4　p. 1070-1071　2008/08　Research paper (scientific journal)

Visualizations of 2D Temperature Field of Molten Metal in Arc Welding Process

M. Tanaka, K. Waki, S. Tashiro, K. Nakata, E. Yamamoto, K. Yamazaki, K. Suzuki

61st Annual Assembly of Int. Inst. Welding (IIW)　2008/07　Research paper (international conference proceedings)

Influence of shielding gas composition on arc properties in TIG welding

M. Tanaka, S. Tashiro, T. Satoh, A. B. Murphy, J. J. Lowke

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING　Vol. 13　No. 3　p. 225-231　2008/05　Research paper (scientific journal)

Effect of Metal Vapor on Thermal Plasma in Gas Tungsten Arc Welding

Kentaro Yamamoto, Manabu Tanaka, Shinichi Tashiro, Kazuhiro Nakata, Keiichi Suzuki, Anthony B. Murphy, John J. Lowke

Smart Processing Technology　Vol. 2　p. 207-210　2008/03　Research paper (scientific journal)

Numerical Simulation of Non-equilibrium Plasma Properties of Argon Gas Tungsten Arc

Shinichi Tashiro, Toru Iwao, Tsuginori Inaba, Anthony B. Murphy, Manabu Tanaka

Smart Processing Technology　Vol. 2　p. 191-194　2008/03　Research paper (scientific journal)

Calculated Properties of Thermal Plasmas in Different Gases and Gas Mixtures, and their Importance in Arc Welding

A.B. Murphy, M. Tanaka, S. Tashiro, T. Satoh, J.J. Lowke

Smart Processing Technology　Vol. 2　p. 181-186　2008/03　Research paper (scientific journal)

Development of 300kW Mobile Type Twin Torch Plasma Arc Furnace for Medical & Asbestos Wastes

Tsuginori Inaba, Bin Liu, Shinichi Tashiro, Manabu Tanaka

Smart Processing Technology　Vol. 2　p. 119-122　2008/03　Research paper (scientific journal)

Numerical simulation for TIG welding of stainless steel with metal vapor

K. Yamamoto, M. Tanaka, S. Tashiro, K. Nakata, K. Yamazaki, E. Yamamoto, K. Suzuki, A.B. Murphy

Proceedings of the International Conference on Computational & Experimental Engineering and Science (ICCES'08)　p. 617-622　2008/03　Research paper (international conference proceedings)

Metal vapour behaviour in gas tungsten arc thermal plasma during welding

M. Tanaka, K. Yamamoto, S. Tashiro, K. Nakata, M. Ushio, K. Yamazaki, E. Yamamoto, K. Suzuki, A. B. Murphy, J. J. Lowke

Welding in the World　Vol. 52　No. 11-12　p. 82-88　2008　Research paper (international conference proceedings)

Numerical analysis of weld penetration geometry during gas tungsten arc welding considering influence of metal vapor mixture

K. Yamamoto, M. Tanaka, S. Tashiro, K. Nakata, A. B. Murphy

TRANSACTIONS OF THE MATERIALS RESEARCH SOCIETY OF JAPAN, VOL 33, NO 3　Vol. 33　No. 3　p. 703-706　2008　Research paper (international conference proceedings)

Non-equilibrium plasma modeling of Gas Tungsten Arc in middle current range

S. Tashiro, T. Iwao, T. Inaba, M. Tanaka

TRANSACTIONS OF THE MATERIALS RESEARCH SOCIETY OF JAPAN, VOL 33, NO 3　Vol. 33　No. 3　p. 695-698　2008　Research paper (international conference proceedings)

Numerical Simulation of Heat Source Property of Tube Cathode Arc and Influence on Weld Penetration Geometry in Anode Material

S. Tashiro, K. Yamamoto, M. Tanaka

TRANSACTIONS OF THE MATERIALS RESEARCH SOCIETY OF JAPAN, VOL 33, NO 3　Vol. 33　No. 3　p. 699-702　2008　Research paper (international conference proceedings)

Dependence of non-equilibrium plasma property of argon GTA on arc current

Shinichi Tashiro, Toru Iwao, Tuginori Inaba, Anthony B. Murphy, Manabu Tanaka

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 26　No. 1　p. 111-116　2008　Research paper (scientific journal)

中空電極を用いたアークプラズマ特性に関する検討

山﨑 洋輔, 中谷 光良, 田中 学, 田代 真一

溶接法ガイドブック6「溶接プロセスの高機能化にむけた新しい展開」　p. II228-II232　2008/01

ティグ溶接における金属蒸気挙動のモデル化

山本 健太郎, 田中 学, 田代 真一, 中田 一博, 山崎 圭, 山本 恵理, 鈴木 啓一

溶接法ガイドブック6「溶接プロセスの高機能化にむけた新しい展開」　p. II223-II227　2008/01

金属蒸気混入時のヘリウムガスタングステンアークの熱源特性

田代 真一, 田中 学, 中田 一博

溶接法ガイドブック6「溶接プロセスの高機能化にむけた新しい展開」　p. II218-II222　2008/01

Ar-He混合ガスタングステンアークにおける熱源特性の数値解析

田代 真一, 田中 学, 中田 一博

溶接法ガイドブック6「溶接プロセスの高機能化にむけた新しい展開」　p. II213-II217　2008/01

Numerical Simulation of Metal Vapor Behavior in Argon TIG Welding

YAMAMOTO Kentaro, TANAKA Manabu, TASHIRO Shinichi, NAKATA Kazuhiro, MURPHY A. B

Trans. JWRI　Vol. 36　No. 2　p. 1-4　2007/12　Research paper (bulletin of university, research institution)

Temperature of Plasma Arc with Changing Current

Y.Mori, T.Iwao, M.Yumoto, S.Tashiro, M.Tanaka

Proceeding of 2007 Japan-Korea Joins Symposium on Electrical Discharge and High Voltage Engineering　p. 55-58　2007/11　Research paper (international conference proceedings)

Temperature Distribution of Nitrogen Torch Plasma Arc under Consideration of Chemical Non-Equilibrium

K.Kaneda, T.Iwao, M.Yumoto, S.Tashiro, M.Tanaka

Advanced in Applied Plasma Science (ISAPS'07)　p. 261-262　2007/09　Research paper (international conference proceedings)

Heat Source Properties of Helium Gas Tungsten Arc with Metal Vapor

TASHIRO Shinichi, TANAKA Manabu, NAKATA Kazuhiro

Trans. JWRI　Vol. 36　No. 1　p. 7-12　2007/09　Research paper (bulletin of university, research institution)

Numerical simulation of non-equilibrium plasma properties of gas tungsten arcs

S. Tashiro, T. Iwao, T. Inaba, M. Tanaka

18th Int. Symp. Plasma Chem. (ISPC 18)　p. 1-4　2007/08　Research paper (international conference proceedings)

Numerical Simulation of Metal Vapor Behavior in Gas Tungsten Arc Welding

K. Yamamoto, M. Tanaka, S. Tashiro, K. Nakata, K. Yamazaki, E. Yamamoto, K. Suzuki

Quarterly J. Japan Welding Soc.　Vol. 25　No. 3　p. 443-449　2007/08　Research paper (scientific journal)

Effects of Welding Process Parameters on Fume Emission in Gas Metal Arc Welding

K. Yamazaki, E. Yamamoto, K. Suzuki, F. Koshiishi, K. Ono, S. Tashiro, M. Tanaka, K. Nakata

60th Annual Assembly of Int. Inst. Welding (IIW)　2007/07　Research paper (international conference proceedings)

In-Situ measurement of metal droplet in Gas metal arc welding by two-colour pyrometry

E. Yamamoto, K. Yamazaki, K. Suzuki, F. Koshiishi, K. Ono, S. Tashiro, M. Tanaka, K. Nakata

60th Annual Assembly of Int. Inst. Welding (IIW)　2007/07　Research paper (international conference proceedings)

Numerical Modeling of TIG Arc with Molten Cathode

K. Yamamoto, M. Tanaka, S. Tashiro, K. Nakata, M. Ushio

60th Annual Assembly of Int. Inst. Welding (IIW)　2007/07　Research paper (international conference proceedings)

Metal vapor behavior in thermal plasma of gas tungsten arcs during welding

M. Tanaka, K. Yamamoto, S. Tashiro, K. Nakata, M. Ushio, K. Yamazaki, E. Yamamoto, K. Suzuki, A.B. Murphy, J.J Lowke

60th Annual Assembly of Int. Inst. Welding (IIW)　2007/07　Research paper (international conference proceedings)

Measurements of cathode surface temperature of plasma torch

Shinichi Tashiro, Hiroshi Nishikawa, Manabu Tanaka

Characterization and Control of Interfaces for High Quality Advanced Materials II: Ceramic Transactions　Vol. 198　p. 395-400　2007/07　Research paper (scientific journal)

Observation of Anode Boundary Layer of Plasma Torch

Kenji Waki, Shinichi Tashiro, Manabu Tanaka

Trans. Mater. Res. Soc. Japan　Vol. 32　No. 2　p. 543-546　2007/06　Research paper (scientific journal)

Dependence of Energy Source Properties of Tube Cathode Arc on Cathode Shape

Takahiro Tamaki, Shinichi Tashiro, Manabu Tanaka, Mitsuyoshi Nakatani, Yosuke Yamazaki

Trans. Mater. Res. Soc. Japan　Vol. 32　No. 2　p. 539-542　2007/06　Research paper (scientific journal)

A Unified Numerical Model of Oxygen Plasma Jet at Atmospheric Pressure

Manabu Tanaka, Shinichi Tashiro, Masakazu Shibahara, Kazushi Tanaka, Yoshimi Sano, Naoyoshi Akiyoshi

Trans. Mater. Res. Soc. Japan　Vol. 32　No. 2　p. 535-538　2007/06　Research paper (scientific journal)

Plasma properties of helium gas tungsten arc with metal vapour

S. Tashiro, M. Tanaka, K. Nakata, T. Iwao, F. Koshiishi, K. Suzuki, K. Yamazaki

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING　Vol. 12　No. 3　p. 202-207　2007/05　Research paper (scientific journal)

Effective Electrode Work Functions in Helium Gas Tungsten Arc During Operation

Shinichi Tashiro, Hiroshi Nishikawa, Manabu Tanaka

PLASMA PROCESSES AND POLYMERS　Vol. 4　p. S995-S998　2007/04　Research paper (scientific journal)

Numerical analysis of energy source properties of hollow cathode arc

Shinichi Tashiro, Manabu Tanaka, Mitsuyoshi Nakatani, Kazuhiko Tani, Michitaka Furubayashi

SURFACE & COATINGS TECHNOLOGY　Vol. 201　No. 9-11　p. 5431-5434　2007/02　Research paper (scientific journal)

Effective electrode work functions in argon gas tungsten arc during operation

M. Tanaka, S. Tashiro, H. Nishikawa, M. Ushio

SURFACE & COATINGS TECHNOLOGY　Vol. 201　No. 9-11　p. 5383-5386　2007/02　Research paper (scientific journal)

Predictions of weld formation using gas tungsten arcs for various arc lengths from unified arc-electrode model

M. Tanaka, S. Tashiro, J. J. Lowke

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING　Vol. 12　No. 1　p. 2-9　2007/02　Research paper (scientific journal)

A study of thermal pinch effect of welding arcs

Manabu Tanaka, Shinichi Tashiro

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 25　No. 2　p. 336-342　2007　Research paper (scientific journal)

アルゴンプラズマアークによる放射パワーと集光点温度上昇の関係

岩瀬 慶一郎, 岩尾 徹, 湯本 雅恵, 田代 真一, 田中 学

電気学会研究会資料-プラズマ研究会　Vol. 2007　No. 1　p. 65-70　2007/01　Research paper (other academic)

Numerical modeling of non-equilibrium plasma property of Gas Tungsten Arc

p. 281-282　2007/01　Research paper (other academic)

Properties of mass and heat transfer for tube cathode arcs

Shinichi Tashiro, Manabu Tanaka, Mitsuyoshi Nakatani, Michitaka Furubayashi, Yosuke Yamazaki

Quarterly J. Japan Welding Soc.　Vol. 25　No. 1　p. 3-9　2007/01　Research paper (scientific journal)

Numerical Study of Tube Cathode Arc with Anode Melting

Shinichi Tashiro, Manabu Tanaka

Proceedings of 2006 International Conference on Robotic Welding, Intelligence and Automation　2006/12　Research paper (international conference proceedings)

Current attachment at thermionic cathode for TIG arc at atmospheric pressure

M. Tanaka, S. Tashiro, J.J. Lowke

IIW Int. Cong. Welding in South-East Asia: A Challenge for The Future　p. 190-194　2006/11　Research paper (international conference proceedings)

Tube cathode arc as a soft heat source for welding

K. Yamamoto, M. Tanaka, S. Tashiro, M. Nakatani

IIW Int. Cong. Welding in South-East Asia: A Challenge for The Future　p. 537-541　2006/11　Research paper (international conference proceedings)

Characteristics of a CO2 Shielded Gas Tungsten Arc

TANAKA Manabu, TASHIRO Shinichi, KASHIMA Takayuki, Anthony B. MURPHY, John J. LOWKE

Trans. JWRI　Vol. 35　No. 1　p. 9-12　2006/09　Research paper (bulletin of university, research institution)

Effective Electrode Work Functions in Helium Gas Tungsten Arc during Operation

Shinichi Tashiro, Hiroshi Nishikawa, Manabu Tanaka

Tenth International Conference on Plasma Surface Engineering　p. 543-543　2006/09　Research paper (international conference proceedings)

Broken Mechanism of Straight Cu Conductors Due to Lightning High Impulse Current

X. Hu, S. Tashiro, T. Otsuka, T. Iwao, T. Inaba, C. Lederle, J. Kindersberger

28th International Conference on Lightning Protection　2006/09　Research paper (international conference proceedings)

CO2-shielded arc as a high-intensity heat source

Manabu Tanaka, Shinichi Tashiro, Masao Ushio, Tsuneo Mita, Anthony B. Murphy, John J. Lowke

VACUUM　Vol. 80　No. 11-12　p. 1195-1198　2006/09　Research paper (scientific journal)

Prediction of energy source properties of free-burning arcs

Shinichi Tashiro, Manabu Tanaka, Masao Ushio, Anthony B. Murphy, Jhon J. Lowke

VACUUM　Vol. 80　No. 11-12　p. 1190-1194　2006/09　Research paper (scientific journal)

Predictions of current attachment at thermionic cathode for gas tungsten arc at atmospheric pressure

Manabu Tanaka, Shinichi Tashiro, John J. Lowke

IIW Doc. 212-1091-06　2006/08　Research paper (international conference proceedings)

Plasma properties of helium gas tungsten arc with metal vapor

Shinichi Tashiro, Manabu Tanaka, Kazuhiro Nakata, Toru Iwao, Fusaki Koshiishi, Keiichi Suzuki, Kei Yamazaki

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 24　No. 2　p. 143-148　2006/05　Research paper (scientific journal)

Characteristics of a Gas Tungsten Arc in CO2 Gas

Manabu Tanaka, Tsuneo Mita, Shinichi Tashiro, Masao Ushio, Anthony B. Murphy, John J. Lowke

IIW Int. Cong. Welding & Related Inspection Tech.　2006/03　Research paper (international conference proceedings)

プラズマトーチにおける作動中タングステン陰極の仕事関数の測定

田代真一, 西川 宏, 田中 学

シンポジウム講演資料　2006/02　Research paper (other academic)

溶接アークにおける熱的ピンチ効果について

田中 学, 田代真一

ア物-06-1289　2006/02　Research paper (other academic)

Energy source properties of tube cathode arc

S. Tashiro, M. Tanaka, M. Nakatani, K. Tani, M. Furubayashi

Transactions of the Materials Research Society of Japan, Vol 31, No 2　Vol. 31　No. 2　p. 483-486　2006　Research paper (international conference proceedings)

Numerical Simulation of Energy Balance in Argon-Helium Mixed Gas Tungsten Arc

Shinichi Tashiro, Manabu Tanaka, Kazuhiro Nakata, Fusaki Koshiishi, Keiichi Suzuki, Kei Yamazaki

J. High Temp. Soc.　Vol. 32　No. 1　p. 69-73　2006/01　Research paper (scientific journal)

Characteristics of A CO2 Gas Shielded Gas Tungsten Arc

Manabu Tanaka, Tsuneo Mita, Shinichi Tashiro, Masao Ushio, Anthony B. Murphy, John J. Lowke

Int. Conf. Welding Sci. & Eng.　p. 187-191　2005/10　Research paper (international conference proceedings)

High Intensity Heat Source Using CO2 Gas Shielded Plasma Arc

Manabu Tanaka, Shinichi Tashiro, Masao Ushio, Tsuneo Mita, Anthony B. Murphy, John J. Lowke

5th Int. Symp. Appl. Plasma Sci.　p. 329-333　2005/09　Research paper (international conference proceedings)

Prediction of Energy Source Properties of Free-Burning Arcs

Shinichi Tashiro, Manabu Tanaka, Anthony B. Murphy, John J. Lowke

5th Int. Symp. Appl. Plasma Sci.　p. 103-108　2005/09　Research paper (international conference proceedings)

Characteristics of a CO2 gas shielded plasma arc

Manabu Tanaka, Tsuneo Mita, Shinichi Tashiro, Masao Ushio, Anthony B. Murphy, John J. Lowke

IIW Doc. 212-1075-05　2005/07　Research paper (international conference proceedings)