顔写真

PHOTO

Yasuda Hiroyuki
安田 弘行
Yasuda Hiroyuki
安田 弘行
Graduate School of Engineering Division of Materials and Manufacturing Science, Professor

keyword Neutron diffraction,Nd-Fe-B magnets,Shape memory and superelastic materials,Intermetallic compounds,Heat resistant alloys,Additive manufacturing,Microstructure of materials,Plasticity of materials

Research History 7

  1. 2013/09 - Present
    Osaka University Graduate School of Engineering Professor

  2. 2008/03 - 2013/08
    Osaka University Graduate School of Engineering Associate Professor

  3. 2007/04 - 2008/03
    Osaka University Research Center for Ultra-High Voltage Electron Microscopy Associate Professor

  4. 2004/04 - 2007/03
    Osaka University Research Center for Ultra-High Voltage Electron Microscopy Associate Professor

  5. 2002/04 - 2004/03
    Osaka University Research Center for Ultra-High Voltage Electron Microscopy Lecturer

  6. 1997/02 - 2002/03
    Osaka University Graduate School of Engineering Research Associate

  7. 1996/04 - 1997/02
    National Research Institute for Metals Researcher

Education 3

  1. Osaka University Graduate School of Engineering (D) Department of Materials Science and Engineering

    1994/04 - 1996/03

  2. Osaka University Graduate School of Engineering (M) Department of Materials Science and Engineering

    1992/04 - 1994/03

  3. Osaka University School of Engineering Department of Materials Science and Engineering

    1988/04 - 1992/03

Committee Memberships 13

  1. 日本金属学会 講演大会委員会 委員長

    2025/04 - Present

  2. Elsevier Intermetallics, editorial board member Other

    2014/01 - Present

  3. 日本金属学会 講演大会委員会 副委員長 Academic society

    2023/04 - 2025/03

  4. 日本金属学会 理事

    2023/04 - 2025/03

  5. 日本金属学会 代議員 Academic society

    2021/04 - 2025/03

  6. The Japan Institute of Metals and Materials Subcommittee member Academic society

    2013/03 - 2025/03

  7. 日本金属学会 2024年秋期講演大会実行副委員長

    2024/04 - 2024/09

  8. 日本鉄鋼協会 代議員 Academic society

    2022/04 - 2024/04

  9. Materials Research Society MRS2020 fall meeting, intermetallic symposium, organizer Academic society

    2020/11 - 2020/12

  10. 文部科学省 大学設置分科会 工学専門委員会

    2017/04 - 2020/03

  11. PRICM-10 PRICM-10, high temperature alloys, session organizer Academic society

    2019/08 - 2019/08

  12. Materials Research Society MRS2018 fall meeting, intermetallic symposium, organizer Academic society

    2018/11 - 2018/11

  13. The Japan Institute of Metals and Materials The Japan Institute of Metals and Materials, annual meeting, Executive Committee Academic society

    2002/11 - 2002/11

Professional Memberships 7

  1. 日本アディティブマニュファクチャリング学会

  2. 日本チタン学会

  3. 軽金属学会

  4. スマートプロセス学会

  5. Materials Research Society

  6. 日本鉄鋼協会

  7. 日本金属学会

Research Areas 1

  1. Nanotechnology/Materials / Structural and functional materials /

Awards 5

  1. 論文賞

    スマートプロセス学会 2021/11

  2. The 69th JIM Outstanding Achievement Award

    The Japan Institute for Metals and Materials 2011/03

  3. 平成16年度大阪大学教育・研究功績賞

    2005

  4. Honda memorial young researcher award

    The Honda Memorial Foundation 2004/05

  5. 7th The Young Researcher Award, Japan Institute of Metals

    The Japan Institute for Metals and Materials 1997/09

Papers 191

  1. Impacts of excess vacancies on order-domain growth in D03 Fe3Al intermetallic phase

    Masayuki Okugawa, Madoka Watanabe, Satoshi Ichikawa, Kazuhisa Sato, Yuheng Liu, Hiroyuki Y. Yasuda, Yuichiro Koizumi

    Scripta Materialia Vol. 267 2025/10 Research paper (scientific journal)

  2. Improvement of High Temperature Strength of NiAl Strengthened Ferritic Heat-resistant Alloys by Grain Boundary Coverage with χ Phase

    Ken Cho, Asuka Yoshioka, Hiroyuki Y. Yasuda

    Tetsu-to-Hagane Vol. 111 No. 10 p. 572-580 2025/10 Research paper (scientific journal)

  3. NiTi coating formation on Ti for enhanced wear resistance utilizing electron-beam additive manufacturing technique

    Lei Wang, Masayuki Okugawa, Yuheng Liu, Ken Cho, Hiroyuki Y. Yasuda, Takayoshi Nakano, Yuichiro Koizumi

    Surfaces and Interfaces Vol. 72 2025/09 Research paper (scientific journal)

  4. Superimpositional design of crystallographic textures and macroscopic shapes via metal additive manufacturing—Game-change in component design

    Takuya Ishimoto, Naotaka Morita, Ryosuke Ozasa, Aira Matsugaki, Ozkan Gokcekaya, Shota Higashino, Masakazu Tane, Tsuyoshi Mayama, Ken Cho, Hiroyuki Y. Yasuda, Masayuki Okugawa, Yuichiro Koizumi, Masato Yoshiya, Daisuke Egusa, Taisuke Sasaki, Eiji Abe, Hajime Kimizuka, Naoko Ikeo, Takayoshi Nakano

    Acta Materialia Vol. 286 p. 120709-120709 2025/03 Research paper (scientific journal)

    Publisher: Elsevier BV
  5. Stress increase by nanoscale hcp precipitates in HfNbTaTiZr high entropy alloys

    Hiroyuki Y. Yasuda, Yusuke Yamada, Masato Onishi, Hiroki Suzuki, Ken Cho, Satoshi Ichikawa, Takeshi Nagase

    Scripta Materialia Vol. 255 p. 116401-116401 2025/01 Research paper (scientific journal)

    Publisher: Elsevier BV
  6. Effect of Scan Speed on Microstructure and Tensile Properties of Ti–48Al–2Cr–2Nb Alloys Fabricated via Additive Manufacturing

    Ken Cho, Masahiro Sakata, Hiroyuki Y. Yasuda, Mitsuharu Todai, Minoru Ueda, Masao Takeyama, Takayoshi Nakano

    Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals Vol. 88 No. 9 p. 198-204 2024/09/01 Research paper (scientific journal)

  7. Novel strengthening mechanism of laser powder bed fusion-manufactured Inconel 718: Effects of customized hierarchical interfaces

    Tsuyoshi Mayama, Takuya Ishimoto, Masakazu Tane, Ken Cho, Koki Manabe, Daisuke Miyashita, Shota Higashino, Taichi Kikukawa, Hiroyuki Y. Yasuda, Takayoshi Nakano

    Additive Manufacturing Vol. 93 2024/08/05 Research paper (scientific journal)

  8. Effect of Mn Content on Hydrogen Embrittlement Resistance of Tempered Martensite in Low Alloy Steel

    Shinji Yoshida, Yuji Arai, Tomohiko Omura, Ken Cho, Hiroyuki Y.Yasuda

    Tetsu-to-Hagane Vol. 110 No. 4 p. 385-394 2024/03/01 Research paper (scientific journal)

    Publisher: Iron and Steel Institute of Japan
  9. Effect of Cooling Rate on Powder Characteristics and Microstructural Evolution of Gas Atomized β-Solidifying γ-TiAl Alloy Powder

    Sung Hyun Park, Ryosuke Ozasa, Ozkan Gokcekaya, Ken Cho, Hiroyuki Y. Yasuda, Myung Hoon Oh, Young Won Kim, Takayoshi Nakano

    Materials Transactions Vol. 65 No. 2 p. 199-204 2024/02 Research paper (scientific journal)

  10. Custom Mechano-Functional Control by Formation of Specific Interfaces via Metal 3D Printing―Learning from Hierarchical Anisotropic Architecture in Bone

    Nakano Takayoshi, Ishimoto Takuya, Matsugaki Aira, Ozasa Ryosuke, Gokcekaya Ozkan, Yasuda Hiroyuki Y., Cho Ken, Koizumi Yuichiro, Okugawa Masayuki, Yoshiya Masato, Fujii Susumu, Tane Masakazu, Miyoshi Eisuke, Higashino Shota

    Materia Japan Vol. 63 No. 1 p. 36-41 2024/01/01

    Publisher: The Japan Institute of Metals and Materials
  11. Unusual Precipitation at Grain Boundaries in Non-Equiatomic CoCrFeMnNi High Entropy Alloys

    Hiroyuki Y. Yasuda, Masaki Horiguchi, Ken Cho, Takahiro Masuda, Takeshi Nagase

    Solid State Phenomena Vol. 353 p. 25-30 2023/12/05 Research paper (scientific journal)

    Publisher: Trans Tech Publications, Ltd.
  12. Microstructure Evolution of Gas-Atomized β-Solidifying γ-TiAl Alloy Powder during Subsequent Heat Treatment

    Sung Hyun Park, Ozkan Gokcekaya, Ryosuke Ozasa, Ken Cho, Hiroyuki Y. Yasuda, Myung Hoon Oh, Takayoshi Nakano

    Crystals Vol. 13 No. 12 2023/12 Research paper (scientific journal)

  13. Effect of Dislocation Density on Hydrogen Embrittlement Resistance of Tempered Martensite in Low Alloy Steels

    Shinji Yoshida, Yuji Arai, Tomohiko Omura, Ken Cho, Hiroyuki Yasuda

    Tetsu-to-Hagane Vol. 109 No. 10 p. 837-845 2023/10/01 Research paper (scientific journal)

    Publisher: Iron and Steel Institute of Japan
  14. Effect of Scan Speed on Microstructure and Tensile Properties of Ti48Al2Cr2Nb Alloys Fabricated via Additive Manufacturing

    Ken Cho, Masahiro Sakata, Hiroyuki Y. Yasuda, Mitsuharu Todai, Minoru Ueda, Masao Takeyama, Takayoshi Nakano

    Materials Transactions Vol. 64 No. 6 p. 1112-1118 2023 Research paper (scientific journal)

  15. Influence of Input Energy Density on Morphology of Unique Layered Microstructure of £-TiAl Alloys Fabricated by Electron Beam Powder Bed Fusion+1

    Ken Cho, Naohide Morita, Hiromasa Matsuoka, Hiroyuki Y. Yasuda, Mitsuharu Todai, Minoru Ueda, Masao Takeyama, Takayoshi Nakano

    Materials Transactions Vol. 64 No. 1 p. 44-49 2023 Research paper (scientific journal)

  16. 航空機ジェットエンジン用TiAl合金の電子ビーム積層造形

    安田弘行, 趙 研, 當代光陽, 中島広豊, 竹山雅夫, 中野貴由

    ふぇらむ Vol. 27 No. 12 p. 913-919 2022/12

  17. Evaluation of Hall-Petch Coefficient at Grain Boundaries of Fe-based Alloys by Nanoindentation Method

    Hiroyuki Yasuda, Ken Cho, Yohei Murozumi, Masanobu Nomoto, Hiroki Toda, Wataru Suzuki

    Tetsu-to-Hagane Vol. 108 No. 10 p. 751-761 2022/10 Research paper (scientific journal)

    Publisher: Iron and Steel Institute of Japan
  18. Influence of input energy density on morphology of unique layered microstructure of <i>γ</i>-TiAl alloys fabricated by electron beam powder bed fusion

    Ken Cho, Naohide Morita, Hiromasa Matsuoka, Hiroyuki Y. Yasuda, Mitsuharu Todai, Minoru Ueda, Masao Takeyama, Takayoshi Nakano

    Journal of Japan Institute of Light Metals Vol. 72 No. 6 p. 298-303 2022/06/15 Research paper (scientific journal)

    Publisher: Japan Institute of Light Metals
  19. Metal Additive Manufacturing (AM) based on Anisotropic Custom-Design Concept

    小泉雄一郎, 奥川将行, 石本卓也, 石本卓也, 趙研, 安田弘行, 中野貴由

    日本ガスタービン学会誌 Vol. 50 No. 2 p. 84-89 2022/03

  20. Peculiar microstructural evolution and tensile properties of β-containing γ-TiAl alloys fabricated by electron beam melting

    Ken Cho, Hajime Kawabata, Tatsuhiro Hayashi, Hiroyuki Y. Yasuda, Hirotoyo Nakashima, Masao Takeyama, Takayoshi Nakano

    Additive Manufacturing Vol. 46 p. 102091-102091 2021/10 Research paper (scientific journal)

    Publisher: Elsevier BV
  21. Improving the Tensile Properties of Additively Manufactured β-Containing TiAl Alloys via Microstructure Control Focusing on Cellular Precipitation Reaction

    Ken Cho, Hirotaka Odo, Keisuke Okamoto, Hiroyuki Y. Yasuda, Hirotoyo Nakashima, Masao Takeyama, Takayoshi Nakano

    Crystals Vol. 11 No. 7 p. 809-809 2021/07/12 Research paper (scientific journal)

    Publisher: MDPI AG
  22. Deformation behavior of HfNbTaTiZr high entropy alloy singe crystals and polycrystals

    Hiroyuki Y. Yasuda, Yusuke Yamada, Ken Cho, Takeshi Nagase

    Materials Science and Engineering: A Vol. 809 p. 140983-140983 2021/02 Research paper (scientific journal)

    Publisher: Elsevier BV
  23. Effect of Chemical Composition on Grain Refinement of AlxCoCrFeNi High Entropy Alloys with NiAl Grain Boundary Precipitates

    Hiroyuki Y. Yasuda, Hiroyuki Miyamoto, Takuya Inagaki, Ken Cho, Takeshi Nagase

    Materials Science Forum Vol. 1016 p. 1690-1695 2021/01/05 Research paper (scientific journal)

    Publisher: Trans Tech Publications, Ltd.
  24. Effect of grain refinement on room temperature ductility of ferritic heat-resistant alloys strengthened by NiAl precipitates

    Ken Cho, Naoki Kawahara, Hiroyuki Y. Yasuda

    ISIJ International Vol. 60 No. 10 p. 2285-2290 2020/10/15 Research paper (scientific journal)

  25. Improvement of High Temperature Fatigue Properties of TiAl Alloys Fabricated by Electron Beam Melting Through Hot Isostatic Pressing Process

    Ken CHO, Hiroyuki YASUDA, Mitsuharu TODAI, Minoru UEDA, Masao TAKEYAMA, Takayoshi NAKANO

    Journal of Smart Processing Vol. 9 No. 4 p. 180-184 2020/07 Research paper (scientific journal)

    Publisher: Sumart Processing Society for Minerals, Environment and Energy
  26. Influence of Mo addition on deformation behavior of metastable β-type Ti alloys

    Vol. 68 No. 2 p. 166-170 2020/04 Research paper (other academic)

  27. Study on formation mechanism of {332}<113> deformation twinning in metastable β-type Ti alloy focusing on stress-induced α” martensite phase

    Ken Cho, Ryota Morioka, Stefanus Harjo, Takuro Kawasaki, Hiroyuki Y. Yasuda

    Scripta Materialia Vol. 177 p. 106-111 2020/03 Research paper (scientific journal)

  28. Investigation of strengthening mechanism in Ni–38Cr-3.8Al alloy with fine lamellar structure by in situ neutron diffraction analysis

    Yoshihiko Koyanagi, Shigeki Ueta, Takuro Kawasaki, Stefanus Harjo, Ken Cho, Hiroyuki Y. Yasuda

    Materials Science and Engineering: A Vol. 773 p. 138822-138822 2020/01 Research paper (scientific journal)

    Publisher: Elsevier BV
  29. Effects of NiAl precipitate microstructure, loading axis and temperature on deformation behavior of Fe–Al–Ni single crystals

    Hiroyuki Y. Yasuda, Taisuke Edahiro, Naoki Takeoka, Takashi Yoshimoto, Masataka Mizuno, Ken Cho

    Intermetallics Vol. 115 p. 106627-106627 2019/12 Research paper (scientific journal)

    Publisher: Elsevier BV
  30. Heat-Resistant Fe-Al-Ni Based Alloys with NiAl Precipitates

    H.Y. Yasuda, K. Cho, T. Edahiro, K. Ikeda

    Proceedings from EPRI’s 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials 2019/10 Research paper (international conference proceedings)

  31. Influence of Unique Layered Microstructure on Mechanical Properties of TiAl-Based Alloys Prepared by Electron Beam Melting

    K. Cho, M. Sakata, J.Y. Oh, H.Y. Yasuda, M. Todai, A. Ikeda, M. Ueda, M. Takeyama, T. Nakano

    Proceedings from EPRI’s 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials 2019/10 Research paper (international conference proceedings)

  32. 電子ビーム三次元積層造形プロセスにおけるTiAl合金部材の特異な微細組織と力学特性

    趙研, 安田弘行, 當代光陽, 上田実, 竹山雅夫, 中野貴由

    チタン Vol. 60 No. 4 p. 50-56 2019/10

  33. Creep behavior of Ni–38Cr-3.8Al alloy with lamellar structure formed by discontinuous precipitation

    Yoshihiko Koyanagi, Hiroyuki Takabayashi, Shigeki Ueta, Ken Cho, Hiroyuki Y. Yasuda

    Materials Science and Engineering: A Vol. 766 p. 138333-138333 2019/10 Research paper (scientific journal)

    Publisher: Elsevier BV
  34. Effects of {332}〈113〉 Deformation Twinning on Fatigue Behavior of Ti–Mn System Alloys

    Ken Cho, Kohei Yuki, Hiroki Kobata, Mitsuo Niinomi, Hiroyuki Y. Yasuda

    MATERIALS TRANSACTIONS Vol. 60 No. 9 p. 1850-1856 2019/07/01 Research paper (scientific journal)

    Publisher: Japan Institute of Metals
  35. Microstructure and Mechanical Properties of TiAl Alloys Prepared by Additive Manufacturing

    Vol. 8 No. 3 p. 78-83 2019/05

    Publisher:
  36. 高硬度高耐食Ni基合金DSA® 760のセル状析出におよぼすCr量の影響

    小柳禎彦, 高林宏之, 安田弘行

    電気製鋼 Vol. 89 No. 2 p. 65-74 2018/12 Research paper (scientific journal)

  37. Microstructure and Fatigue Properties of TiAl with Unique Layered Microstructure Fabricated by Electron Beam Melting

    Ken Cho, Ryota Kobayashi, Takuma Fukuoka, Jong Yeong Oh, Hiroyuki Y. Yasuda, Mitsuharu Todai, Takayoshi Nakano, Ayako Ikeda, Minoru Ueda, Masao Takeyama

    Materials Science Forum Vol. 941 p. 1597-1602 2018/12 Research paper (scientific journal)

    Publisher: Trans Tech Publications, Ltd.
  38. Influence of Cr Content on Cellular Precipitation Behaviour of Ni-38Cr-3.8Al Alloy with Lamellar Structure

    Yoshihiko Koyanagi, Hiroyuki Takabayashi, Hiroyuki Y. Yasuda

    Materials Science Forum Vol. 941 p. 1203-1209 2018/12 Research paper (scientific journal)

    Publisher: Trans Tech Publications, Ltd.
  39. Effects of Mo Addition on Deformation Behavior of Metastable Beta-Type Ti-Mn Single Crystals

    Ryota Morioka, Ken Cho, Hiroyuki Y. Yasuda

    Materials Science Forum Vol. 941 p. 1360-1365 2018/12 Research paper (scientific journal)

    Publisher: Trans Tech Publications, Ltd.
  40. Effects of Heat Treatment on Unique Layered Microstructure and Tensile Properties of TiAl Fabricated by Electron Beam Melting

    Masahiro Sakata, Jong Yeong Oh, Ken Cho, Hiroyuki Y. Yasuda, Mitsuharu Todai, Takayoshi Nakano, Ayako Ikeda, Minoru Ueda, Masao Takeyama

    Materials Science Forum Vol. 941 p. 1366-1371 2018/12 Research paper (scientific journal)

    Publisher: Trans Tech Publications, Ltd.
  41. Deformation Behavior of Fe-Al Single Crystals Containing Fe2AlTi Precipitates

    Hiroyuki Y. Yasuda, Hiroyuki Yakage, Yunima Shinohara, Ken Cho

    Materials Science Forum Vol. 941 p. 1372-1377 2018/12 Research paper (scientific journal)

    Publisher: Trans Tech Publications, Ltd.
  42. {332}<113>変形双晶導入による低コスト準安定β型チタン合金の強度-延性バランス改善

    趙 研, 新家光雄, 安田弘行

    チタン Vol. 66 p. 274-277 2018/10

  43. Grain refinement of non-equiatomic Cr-rich CoCrFeMnNi high-entropy alloys through combination of cold rolling and precipitation of σ phase

    Ken Cho, Yumi Fujioka, Takeshi Nagase, Hiroyuki Y. Yasuda

    Materials Science and Engineering: A Vol. 735 p. 191-200 2018/09 Research paper (scientific journal)

    Publisher: Elsevier BV
  44. Improvement of room and high temperature tensile properties of NiAl-strengthened ferritic heat-resistant steels through Mo addition

    Ken Cho, Kenshi Ikeda, Hiroyuki Y. Yasuda

    Materials Science and Engineering: A Vol. 728 p. 239-250 2018/06 Research paper (scientific journal)

    Publisher: Elsevier BV
  45. Oxidation of Benzyl Alcohol over Nanoporous Au–CeO2 Catalysts Prepared from Amorphous Alloys and Effect of Alloying Au with Amorphous Alloys

    Ai Nozaki, Tasuku Yasuoka, Yasutaka Kuwahara, Tetsutaro Ohmichi, Kohsuke Mori, Takeshi Nagase, Hiroyuki Y. Yasuda, Hiromi Yamashita

    Industrial & Engineering Chemistry Research Vol. 57 No. 16 p. 5599-5605 2018/04/25 Research paper (scientific journal)

  46. Influence of unique layered microstructure on fatigue properties of Ti-48Al-2Cr-2Nb alloys fabricated by electron beam melting

    Ken Cho, Ryota Kobayashi, Jong Yeong Oh, Hiroyuki Y. Yasuda, Mitsuharu Todai, Takayoshi Nakano, Ayako Ikeda, Minoru Ueda, Masao Takeyama

    Intermetallics Vol. 95 p. 1-10 2018/04 Research paper (scientific journal)

    Publisher: Elsevier BV
  47. Origin of pseudoelasticity by twinning in D03-type Fe3Ga

    Masataka Mizuno, Hiroyuki Y. Yasuda, Hideki Araki

    Computational Materials Science Vol. 145 p. 154-162 2018/04 Research paper (scientific journal)

    Publisher: Elsevier BV
  48. The effect of HIP treatment on the mechanical properties of titanium aluminide additive manufactured by EBM

    Daisuke Kondo, Hiroyuki Yasuda, Takayoshi Nakano, Ken Cho, Ayako Ikeda, Minoru Ueda, Yuto Nagamachi

    Proceedings of International Conference on Hot Isostatic Pressing 2017 2018/01 Research paper (international conference proceedings)

  49. Effects of CoAl precipitates on deformation behavior of Fe-Al-Co single crystals

    Hiroyuki Y. Yasuda, Yoshiaki Odawara, Kentaro Soma, Takashi Yoshimoto, Ken Cho

    Intermetallics Vol. 91 p. 140-149 2017/12 Research paper (scientific journal)

    Publisher: Elsevier BV
  50. Formation of ultrafine-grained microstructure in Al 0.3 CoCrFeNi high entropy alloys with grain boundary precipitates

    Hiroyuki Y. Yasuda, Hiroyuki Miyamoto, Ken Cho, Takeshi Nagase

    Materials Letters Vol. 199 p. 120-123 2017/07 Research paper (scientific journal)

    Publisher: Elsevier BV
  51. Effect of building direction on the microstructure and tensile properties of Ti-48Al-2Cr-2Nb alloy additively manufactured by electron beam melting

    Mitsuharu Todai, Takayoshi Nakano, Tianqi Liu, Hiroyuki Y. Yasuda, Koji Hagihara, Ken Cho, Minoru Ueda, Masao Takeyama

    Additive Manufacturing Vol. 13 p. 61-70 2017/01 Research paper (scientific journal)

    Publisher: Elsevier BV
  52. Deformation Behavior of Fe-Al-Co-Ti Single Crystals Containing Co2AlTi Precipitates

    Hiroyuki Y. Yasuda, Ryota Kobayashi

    Materials Science Forum Vol. 879 p. 2210-2215 2016/11/15 Research paper (scientific journal)

    Publisher: Trans Tech Publications, Ltd.
  53. Skeletal Au prepared from Au-Zr amorphous alloys with controlled atomic compositions and arrangement for active oxidation of benzyl alcohol

    Nozaki, A., Tanihara, Y., Kuwahara, Y., Ohmichi, T., Mori, K., Nagase, T., Yasuda, H.Y., Calers, C., Louis, C., Yamashita, H.

    Journal of Materials Chemistry A Vol. 4 No. 21 p. 8458-8465 2016/05 Research paper (scientific journal)

  54. Hydrogenation of 1-octene over skeletal Pd catalysts prepared from Pd-Zr amorphous alloys and the effect of Ni addition

    Nozaki, A., Tanihara, Y., Kuwahara, Y., Ohmichi, T., Mori, K., Nagase, T., Yasuda, H.Y., Yamashita, H.

    Catalysis Today Vol. 265 p. 138-143 2016/05 Research paper (scientific journal)

  55. Stability of pseudotwins in D03-type alloys calculated from first principles

    Masataka Mizuno, Hiroyuki Y. Yasuda, Hideki Araki

    Acta Materialia Vol. 109 p. 82-89 2016/05 Research paper (scientific journal)

    Publisher: Elsevier BV
  56. Skeletal Ni Catalysts Prepared from Amorphous Ni-Zr Alloys: Enhanced Catalytic Performance for Hydrogen Generation from Ammonia Borane

    Ai Nozaki, Yasutomo Tanihara, Yasutaka Kuwahara, Tetsutaro Ohmichi, Kohsuke Mori, Takeshi Nagase, Hiroyuki Y. Yasuda, Hiromi Yamashita

    ChemPhysChem Vol. 17 No. 3 p. 412-417 2016/02 Research paper (scientific journal)

  57. In situ transmission-electron-microscopy observation of solid-state amorphization behavior in Ti50Ni44Fe6 alloy by high-voltage electron microscopy

    Takeshi Nagase, Atsushi Sasaki, Hiroyuki Y. Yasuda, Tomoyuki Terai, Takashi Fukuda, Tomoyuki Kakeshita

    Acta Materialia Vol. 104 p. 201-209 2016/02 Research paper (scientific journal)

    Publisher: Elsevier BV
  58. Solid State Amorphization Behavior in Ti50Ni44Fe6 Alloy Investigated by High Voltage Electron Microscopy (HVEM)

    Nagase Takeshi, Sasaki Atsushi, Yasuda Hiroyuki, Terai Tomoyuki, Fukuda Takashi, Kakeshita Tomoyuki

    Materia Japan Vol. 55 No. 12 p. 586-586 2016

    Publisher: The Japan Institute of Metals and Materials
  59. Dynamic strain aging of Al 0.3 CoCrFeNi high entropy alloy single crystals

    Hiroyuki Y. Yasuda, Kyosuke Shigeno, Takeshi Nagase

    Scripta Materialia Vol. 108 p. 80-83 2015/11 Research paper (scientific journal)

    Publisher: Elsevier BV
  60. Effect of NiAl Precipitates on Strength and Damping Capacity of Fe-Cr-Al Alloys

    Mahito Morita, Hiroyuki Y. Yasuda

    Tetsu-to-Hagane Vol. 101 No. 7 p. 394-399 2015/07 Research paper (scientific journal)

    Publisher: Iron and Steel Institute of Japan
  61. 22pCH-3 Stability of pseudo-twin in Fe_3Ga

    Mizuno M., Araki H., Yasuda H.

    Meeting Abstracts of the Physical Society of Japan Vol. 70 p. 2733-2733 2015

    Publisher: The Physical Society of Japan (JPS)
  62. 金属間化合物の析出物を利用した新規強化機構

    安田弘行

    日本学術振興会「材料の微細組織と機能性」第133委員会第224回研究会講演概要集 2014/12 Research paper (other academic)

  63. Development of High Temperature Structural Materials for Realizing Low Carbon Society

    Vol. 66 No. 3 p. 103-105 2014/07

    Publisher:
  64. In Situ Observation of Pseudoelasticity in Fe3Al Single Crystals with D03 Structure

    Hiroyuki Y. Yasuda, Yasuhiro Oda, Takenori Maruyama, Mayumi Ojima, Yoshitaka Adachi

    MATERIALS TRANSACTIONS Vol. 55 No. 5 p. 788-795 2014/05 Research paper (scientific journal)

    Publisher: Japan Institute of Metals
  65. Effect of two-stage deformation on magnetic properties of hot-deformed Nd–Fe–B permanent magnets

    T. Mouri, M. Kumano, H.Y. Yasuda, T. Nagase, R. Kato, Y. Nakazawa, H. Shimizu

    Scripta Materialia Vol. 78-79 p. 37-40 2014/05 Research paper (scientific journal)

    Publisher: Elsevier BV
  66. Development of new materials by controlling dislocation motion

    H. Y. Yasuda

    No. 564 p. 4-9 2014/04

    Publisher:
  67. Variant selection of martensites in steel welded joints with low transformation temperature weld metals

    Masaru Takahashi, Hiroyuki Y. Yasuda

    Journal of Alloys and Compounds Vol. 577 p. S601-S604 2013/11 Research paper (scientific journal)

    Publisher: Elsevier BV
  68. Effect of Ga concentration on twinning pseudoelasticity in Fe–Ga single crystals

    Hiroyuki Y. Yasuda, Yasuhiro Oda, Takuya Kishimoto, Takenori Maruyama

    Journal of Alloys and Compounds Vol. 577 p. S563-S567 2013/11 Research paper (scientific journal)

    Publisher: Elsevier BV
  69. Effects of Ga Concentration, Heat Treatment and Deformation Temperature on Pseudoelasticity of Fe-Ga Polycrystals

    Hiroyuki Y. Yasuda, Takenori Maruyama

    Journal of the Japan Institute of Metals and Materials Vol. 77 No. 6 p. 237-244 2013/06 Research paper (scientific journal)

    Publisher: Japan Institute of Metals
  70. Effect of Ni Doping on Strength and Damping Capacity of Fe–Al Alloys

    Hiroyuki Y. Yasuda, Kouki Fukushima, Keiji Kouzai, Taisuke Edahiro

    ISIJ International Vol. 53 No. 4 p. 704-708 2013/04 Research paper (scientific journal)

    Publisher: Iron and Steel Institute of Japan
  71. MeV Electron Irradiation Induced Solid-State Amorphization (SSA) in B2 Intermetallic Compounds

    Takeshi NAGASE, Atsushi SASAKI, Kazuya TAKIZAWA, Hiroyuki YASUDA, Tomoyuki TERAI, Takashi FUKUDA, Tomoyuki KAKESHITA, Masato WAKEDA, Yoji SHIBUTANI, Hidehiro YASUDA, Hirotaro MORI

    Journal of the Society of Materials Science, Japan Vol. 62 No. 3 p. 185-190 2013/03 Research paper (scientific journal)

    Publisher: Society of Materials Science, Japan
  72. Mechanical properties and hardening mechanism of Fe–Al–Ni single crystals containing NiAl precipitates

    T. Edahiro, K. Kouzai, H.Y. Yasuda

    Acta Materialia Vol. 61 No. 5 p. 1716-1725 2013/03 Research paper (scientific journal)

    Publisher: Elsevier BV
  73. Advanced materials design for fe-based shape memory alloys through structural control

    Yasuda, H.Y.

    Progress in Advanced Structural and Functional Materials Design 2013 Research paper (scientific journal)

  74. Effects of Ga Concentration, Heat Treatment and Deformation Temperature on Pseudoelasticity of Fe&ndash;Ga Polycrystals

    Hiroyuki Y. Yasuda, Takenori Maruyama

    MATERIALS TRANSACTIONS Vol. 54 No. 1 p. 36-42 2013/01 Research paper (scientific journal)

    Publisher: Japan Institute of Metals
  75. Orientation and deformation mechanisms of hot-deformed Nd-Fe-B magnets

    R. Kato, Y. Nakazawa, H. Shimizu, M. Kumano, T. Nagase, H. Y. Yasuda

    Proc. of The 22th International Workshop on Rare-Earth Permanent Magnets and heir Applications 2012/09 Research paper (international conference proceedings)

  76. 金属間化合物の析出による新規強化機構

    安田弘行

    第55回材料強度と破壊総合シンポジウム論文集 2012/03 Research paper (other academic)

  77. Effect of sintering temperature on structure and bioactivity of HAp–5·0 wt-%SiO2bioceramic composites

    X-W Li, X Zhang, P-L Zhang, H Yasuda, Y Umakoshi

    Materials Technology Vol. 27 No. 1 p. 46-48 2012/02 Research paper (scientific journal)

    Publisher: Informa UK Limited
  78. Effect of Third Elements on Pseudoelasticity in Fe3Ga Alloys

    Hiroyuki Y. Yasuda, Tsuyoshi Furuta, Takenori Maruyama

    Materials Science Forum Vol. 706-709 p. 2032-2037 2012/01 Research paper (scientific journal)

  79. Pseudoelasticity in pseudo-binary Fe3(Al1−xGax) single crystals

    H.Y. Yasuda, K. Shibata, Y. Umakoshi

    Intermetallics Vol. 19 No. 12 p. 1786-1793 2011/12 Research paper (scientific journal)

    Publisher: Elsevier BV
  80. Tensile deformation behavior of Nd–Fe–B alloys

    H.Y. Yasuda, M. Kumano, T. Nagase, R. Kato, H. Shimizu

    Scripta Materialia Vol. 65 No. 8 p. 743-746 2011/10 Research paper (scientific journal)

    Publisher: Elsevier BV
  81. Stability of B2 phase in Ti–Ni–Fe alloys against MeV electron-irradiation-induced solid-state amorphization and martensite transformation

    Takeshi Nagase, Atsushi Sasaki, Hiroyuki Y. Yasuda, Hirotaro Mori, Tomoyuki Terai, Tomoyuki Kakeshita

    Intermetallics Vol. 19 No. 9 p. 1313-1318 2011/09 Research paper (scientific journal)

    Publisher: Elsevier BV
  82. Transformation and Twinning Pseudoelasticities in Fe3Ga Single Crystals

    Hiroyuki Y. Yasuda, Yasuhiro Oda, Takuya Kishimoto, Yukichi Umakoshi

    Solid State Phenomena Vol. 172-174 p. 31-36 2011/06 Research paper (scientific journal)

    Publisher: Trans Tech Publications, Ltd.
  83. Pseudoelasticity of DO3-Type Fe3Al and Fe 3Ga-based alloys

    Hiroyuki Y. Yasuda, Yukichi Umakoshi

    Materials Research Society Symposium Proceedings Vol. 1295 p. 21-32 2011 Research paper (international conference proceedings)

  84. Temperature Dependence of Twinning Pseudoelasticity in Fe3Ga Single Crystals

    Hiroyuki Y. Yasuda, Takuya Kishimoto, Yukichi Umakoshi

    MATERIALS TRANSACTIONS Vol. 51 No. 12 p. 2196-2200 2010/12 Research paper (scientific journal)

    Publisher: Japan Institute of Metals
  85. Effect of long-period stacking ordered phase on mechanical properties of Mg97Zn1Y2 extruded alloy

    K. Hagihara, A. Kinoshita, Y. Sugino, M. Yamasaki, Y. Kawamura, H.Y. Yasuda, Y. Umakoshi

    Acta Materialia Vol. 58 No. 19 p. 6282-6293 2010/11 Research paper (scientific journal)

    Publisher: Elsevier BV
  86. Pseudoelastic behaviour of Fe3Al single crystals with D03 structure

    H.Y. Yasuda, Y. Umakoshi

    Intermetallics Vol. 18 No. 7 p. 1273-1278 2010/07 Research paper (scientific journal)

    Publisher: Elsevier BV
  87. Plastic deformation behavior of Mg97Zn1Y2 extruded alloys

    K. HAGIHARA, A. KINOSHITA, Y. SUGINO, M. YAMASAKI, Y. KAWAMURA, H.Y. YASUDA, Y. UMAKOSHI

    Transactions of Nonferrous Metals Society of China Vol. 20 No. 7 p. 1259-1268 2010/07 Research paper (scientific journal)

    Publisher: Elsevier BV
  88. Temperature Dependence of Compressive Deformation Behavior of Mg89Zn4Y7 Extruded LPSO-Phase Alloys

    Koji Hagihara, Akihito Kinoshita, Yuya Sugino, Michiaki Yamasaki, Yoshihito Kawamura, Hiroyuki Y. Yasuda, Yukichi Umakoshi

    Materials Science Forum Vol. 654-656 p. 607-610 2010/06 Research paper (scientific journal)

    Publisher: Trans Tech Publications, Ltd.
  89. Plastic deformation behavior of Mg89Zn4Y7 extruded alloy composed of long-period stacking ordered phase

    K. Hagihara, A. Kinoshita, Y. Sugino, M. Yamasaki, Y. Kawamura, H.Y. Yasuda, Y. Umakoshi

    Intermetallics Vol. 18 No. 5 p. 1079-1085 2010/05 Research paper (scientific journal)

    Publisher: Elsevier BV
  90. Effect of Ms Temperature on Residual Stress in Welded Joints of High-Strength Steels

    Chiaki Shiga, Hiroyuki Y. Yasuda, Kazuo Hiraoka, Hiroshi Suzuki

    Welding in the World Vol. 54 No. 3-4 p. R71-R79 2010/03 Research paper (scientific journal)

    Publisher: Springer Science and Business Media LLC
  91. Pseudoelastic Behavior of Fe–Al Polycrystals

    Hiroyuki Y. Yasuda, Keiji Kouzai, Yuuki Kawamura, Yukichi Umakoshi

    ISIJ International Vol. 50 No. 1 p. 147-151 2010/01 Research paper (scientific journal)

    Publisher: Iron and Steel Institute of Japan
  92. Magneto-mechanical and Pseudoelastic Damping of Fe–Al Based Single Crystals

    Hiroyuki Y. Yasuda, Kouki Fukushima, Yuichiro Koizumi, Yoritoshi Minamino, Yukichi Umakoshi

    ISIJ International Vol. 49 No. 10 p. 1630-1635 2009/10 Research paper (scientific journal)

    Publisher: Iron and Steel Institute of Japan
  93. Unusual pseudoelastic behaviour of Fe3Ga shape memory alloys

    H Y Yasuda, M Aoki, Y Oda, K Fukushima, Y Umakoshi

    Journal of Physics: Conference Series Vol. 165 p. 012053-012053 2009/05/01 Research paper (scientific journal)

    Publisher: IOP Publishing
  94. Multimode pseudoelasticity in Fe–23.8at% Ga single crystals with D03 structure

    H.Y. Yasuda, Y. Oda, M. Aoki, K. Fukushima, Y. Umakoshi

    Intermetallics Vol. 16 No. 11-12 p. 1298-1304 2008/11 Research paper (scientific journal)

    Publisher: Elsevier BV
  95. Tension–compression asymmetry of pseudoelasticity in Fe–23.0at.%Al single crystals

    H.Y. Yasuda, K. Yamaoka, Y. Oda, Y. Umakoshi

    Scripta Materialia Vol. 59 No. 7 p. 738-741 2008/10 Research paper (scientific journal)

    Publisher: Elsevier BV
  96. Temperature Dependence of Pseudoelasticity and Shape Memory Effect in Fe3Ga Single Crystals with D03 Structure

    Hiroyuki Y. Yasuda, Kouki Fukushima, Mitsuhiro Aoki, Yukichi Umakoshi

    ISIJ International Vol. 48 No. 7 p. 1014-1019 2008/07 Research paper (scientific journal)

    Publisher: Iron and Steel Institute of Japan
  97. Effect of Third Elements on Pseudoelastic Behavior in Fe3Al Single Crystals

    Hiroyuki Y. Yasuda, T. Kase, S. Minamiguchi, A. Yokoyama, Yukichi Umakoshi, P.M. Bronsveld, Jeff T.M. de Hosson

    Materials Science Forum Vol. 561-565 p. 391-394 2007/10 Research paper (scientific journal)

    Publisher: Trans Tech Publications, Ltd.
  98. Control of Texture in Intermetallic Compounds by Thermomechanical Processing

    Yukichi Umakoshi, Hiroyuki Y. Yasuda, Toshiya Sakata

    Solid State Phenomena Vol. 127 p. 9-14 2007/09/15 Part of collection (book)

    Publisher: Trans Tech Publications Ltd.
  99. Texture Control in Hydroxyapatite by Hot Forging

    Hiroyuki Y. Yasuda, Yoshiyuki Noguchi, Yukichi Umakoshi, Akio Takaoka

    MATERIALS TRANSACTIONS Vol. 48 No. 8 p. 2062-2066 2007/08 Research paper (scientific journal)

    Publisher: Japan Institute of Metals
  100. Temperature dependence of pseudoelasticity in Fe3Al single crystals

    H.Y. Yasuda, T. Nakajima, Y. Umakoshi

    Intermetallics Vol. 15 No. 5-6 p. 819-823 2007/05 Research paper (scientific journal)

    Publisher: Elsevier BV
  101. Kink Band Formation and Its Effect on Recrystallization in Ordered and Disordered Ni3Fe Single Crystals

    Tatsuya Okada, Hiroyuki Y. Yasuda, Tetsuya Watanabe, Fukuji Inoko, Yukichi Umakoshi

    MATERIALS TRANSACTIONS Vol. 48 No. 4 p. 759-763 2007/04 Research paper (scientific journal)

    Publisher: Japan Institute of Metals
  102. Effect of the ordering process on pseudoelasticity in Fe3Ga single crystals

    H.Y. Yasuda, M. Aoki, Y. Umakoshi

    Acta Materialia Vol. 55 No. 7 p. 2407-2415 2007/04 Research paper (scientific journal)

    Publisher: Elsevier BV
  103. Pseudoelastic behavior of Fe3Ga single crystals with D0 3 structure

    Hiroyuki Y. Yasuda, Mitsuhiro Aoki, Kouki Fukushima, Yukichi Umakoshi

    Materials Research Society Symposium Proceedings Vol. 980 p. 315-320 2007 Research paper (international conference proceedings)

  104. Control of texture in intermetallic compounds by thermomechanical processing

    Y. Umakoshi, H. Y. Yasuda, T. Sakata

    Solid State Phenomena Vol. 127 p. 9-14 2007 Research paper (international conference proceedings)

    Publisher: Trans Tech Publications Ltd
  105. 2113 Pseudoelastic Behavior Based on Reversible motion of Dislocations in Fe-Al Shape Memory Alloys

    YASUDA Hiroyuki Y., KAWAMURA Yuki, UMAKOSHI Yukichi

    The proceedings of the JSME annual meeting Vol. 2007 p. 163-164 2007

    Publisher: The Japan Society of Mechanical Engineers
  106. Effects of dislocation and microstructure on pseudoelasticity in D0(3)-type Fe3Al single crystals

    Yukichi Umakoshi, Takashi Nakajima, Hiroyuki Y. Yasuda

    ADVANCED INTERMETALLIC-BASED ALLOYS Vol. 980 p. 33-+ 2007 Research paper (international conference proceedings)

  107. Advances in Transmission Electron Microscopy: Self Healing or is Prevention Better than Cure?

    de Hosson, J.T.M., Yasuda, H.Y.

    Springer Series in Materials Science Vol. 100 2007 Research paper (scientific journal)

  108. Shape memory effect in Fe3Al single crystals with D03 structure

    H.Y. Yasuda, T. Nakajima, Y. Umakoshi

    Scripta Materialia Vol. 55 No. 10 p. 859-862 2006/11 Research paper (scientific journal)

    Publisher: Elsevier BV
  109. Effect of heat treatment on pseudoelasticity in Fe–25.0at.% Al single crystals

    H.Y. Yasuda, T. Nakajima, S. Murakami, M. Ueda, Y. Umakoshi

    Intermetallics Vol. 14 No. 10-11 p. 1221-1225 2006/10 Research paper (scientific journal)

    Publisher: Elsevier BV
  110. Effect of &beta;-TCP Size on Bone-Like Layer Growth and Adhesion of Osteoblast-Like Cells in Hydroxyapatite/&beta;-TCP Composites

    Hiroyuki Y. Yasuda, Mitsuhiro Aoki, Yohei Fujita, Wataru Fujitani, Yukichi Umakoshi, Akio Takaoka

    MATERIALS TRANSACTIONS Vol. 47 No. 9 p. 2368-2372 2006/09 Research paper (scientific journal)

    Publisher: Japan Institute of Metals
  111. Effect of Crystal Structure on the Lightness of Zinc Electroplated Steel Sheet

    Masanari KIMOTO, Mitsuharu YONEMURA, Hiroyuki YASUDA, Yukichi UMAKOSHI

    Tetsu-to-Hagane Vol. 92 No. 9 p. 551-556 2006/09 Research paper (scientific journal)

    Publisher: Iron and Steel Institute of Japan
  112. Bioactive ceramic composites sintered from hydroxyapatite and silica at 1200∘C: preparation, microstructures and in vitro bone-like layer growth

    X. W. Li, H. Y. Yasuda, Y. Umakoshi

    Journal of Materials Science: Materials in Medicine Vol. 17 No. 6 p. 573-581 2006/06 Research paper (scientific journal)

    Publisher: Springer Science and Business Media LLC
  113. Pseudoelasticity in Fe3Al Single Crystals under Cyclic Loading

    Hiroyuki Y. Yasuda, Keisuke Yamaoka, Yukichi Umakoshi

    Materials Science Forum Vol. 512 p. 25-30 2006/04/15 Part of collection (book)

    Publisher: Trans Tech Publications Ltd.
  114. Observation of Lattice Defects and Nondestructive Evaluation of Fatigue Life in FeAl and Ni3Al Based Alloy by Means of Magnetic Measurement

    Yukichi Umakoshi, Hiroyuki Y. Yasuda

    Materials Science Forum Vol. 512 p. 13-18 2006/04/15 Part of collection (book)

    Publisher: Trans Tech Publications Ltd.
  115. Surface Deformation Features in Ultrafine-Grained Copper Cyclically Stressed at Different Temperatures

    X. W. Li, S. D. Wu, Y. Wu, H. Y. Yasuda, Y. Umakoshi

    MATERIALS TRANSACTIONS Vol. 46 No. 12 p. 3077-3080 2005/12 Research paper (scientific journal)

    Publisher: Japan Institute of Metals
  116. Effect of Al concentration on pseudoelasticity in FeAl single crystals

    H YASUDA, T NAKAJIMA, K NAKANO, K YAMAOKA, M UEDA, Y UMAKOSHI

    Acta Materialia Vol. 53 No. 20 p. 5343-5351 2005/12 Research paper (scientific journal)

    Publisher: Elsevier BV
  117. Temperature-Dependent Microstructures in Fatigued Ultrafine-Grained Copper Produced by Equal Channel Angular Pressing

    X. W. Li, S. D. Wu, Y. Wu, H. Y. Yasuda, Y. Umakoshi

    Advanced Engineering Materials Vol. 7 No. 9 p. 829-833 2005/09 Research paper (scientific journal)

    Publisher: Wiley
  118. Nondestructive damage evaluation for γ′-Ni3(Al,Ti) single crystals containing disordered γ precipitates

    Hiroyuki Y. Yasuda, Toshifumi Yanai, Yukichi Umakoshi

    Journal of Applied Physics Vol. 98 No. 4 p. 043905-043905 2005/08/15 Research paper (scientific journal)

    Publisher: AIP Publishing
  119. Pseudoelasticity in Fe3Ga single crystals

    H.Y. Yasuda, M. Aoki, A. Takaoka, Y. Umakoshi

    Scripta Materialia Vol. 53 No. 2 p. 253-257 2005/07 Research paper (scientific journal)

    Publisher: Elsevier BV
  120. Quantitative analysis of gamma precipitates in cyclically deformed Ni-3(Al,Ti) single crystals using magnetic technique

    Y Umakoshi, HY Yasuda, T Yanai

    INTEGRATIVE AND INTERDISCIPLINARY ASPECTS OF INTERMETALLICS Vol. 842 p. 79-84 2005 Research paper (international conference proceedings)

  121. Reverse Transformation in Fe-Ni Bicrystals

    M. Ueda, H. Yasuda, Y. Umakoshi

    ISIJ International Vol. 44 No. 11 p. 1924-1930 2004/11 Research paper (scientific journal)

    Publisher: Iron and Steel Institute of Japan
  122. 磁気特性を利用した金属間化合物の非破壊検査、検査技術、

    馬越佑吉, 安田弘行

    検査技術 Vol. 9 No. 11 p. 13-18 2004/11

    Publisher: 日本工業出版
  123. Production of nano-crystal and metallic glass by electron irradiation induced phase transformation.

    Takeshi Nagase, Takayoshi Nakano, Hiroyuki Yasuda, Koji Hagihara, Yukichi Umakoshi

    2004/10 Research paper (bulletin of university, research institution)

  124. Bone-like Layer Growth and Adhesion of Osteoblast-like Cells on Calcium-deficient Hydroxyapatite Synthesized at Different pH

    Hiroyuki Y. Yasuda, Yohei Fujita, Wataru Fujitani, Yukichi Umakoshi, Yoshio Sakka, Fengqiu Tang, Akio Takaoka, Nariaki Matsuura

    MATERIALS TRANSACTIONS Vol. 45 No. 5 p. 1782-1787 2004/05 Research paper (scientific journal)

    Publisher: Japan Institute of Metals
  125. Magnetic observation of deformation substructure in cyclically deformed Fe3Al single crystals

    Hiroyuki Y. Yasuda, Takeshi Hatta, Yukichi Umakoshi

    Science and Technology of Advanced Materials Vol. 5 No. 1-2 p. 3-9 2004/01 Research paper (scientific journal)

    Publisher: Informa UK Limited
  126. Nondestruction lifetime prediction by magnetic measurements, Encyclopedia of Materials

    Y. Umakoshi, H.Y. Yasuda

    Encyclopedia of Materials, (2004) 2004/01

  127. Effect of ordering process on giant pseudoelasticity in Fe3Al single crystals

    H.Y. Yasuda, K. Nakano, T. Nakajima, M. Ueda, Y. Umakoshi

    Acta Materialia Vol. 51 No. 17 p. 5101-5112 2003/10 Research paper (scientific journal)

    Publisher: Elsevier BV
  128. Orientation Dependence of Pseudoelasticity in Fe3Al Single Crystals

    Hiroyuki Y. Yasuda, K. Nakano, M. Ueda, Yukichi Umakoshi

    Materials Science Forum Vol. 426-432 p. 1801-1806 2003/08 Research paper (scientific journal)

    Publisher: Trans Tech Publications, Ltd.
  129. Martensitic and Reverse Transformation in Fe-Ni Bicrystals

    Masato Ueda, Hiroyuki Y. Yasuda, Yukichi Umakoshi

    Materials Science Forum Vol. 426-432 p. 1505-1510 2003/08 Research paper (scientific journal)

    Publisher: Trans Tech Publications, Ltd.
  130. Interphase boundary fracture and grain boundary precipitation of Ni3Al(γ′) phase in β-NiAl bicrystals

    T. Sakata, H.Y. Yasuda, Y. Umakoshi

    Acta Materialia Vol. 51 No. 6 p. 1561-1572 2003/04 Research paper (scientific journal)

    Publisher: Elsevier BV
  131. Quantitative analysis of anti-phase boundary tubes in cyclically deformed Fe–40at.%Al single crystals by means of magnetic technique

    H.Y. Yasuda, R. Jimba, Y. Umakoshi

    Scripta Materialia Vol. 48 No. 5 p. 589-592 2003/03 Research paper (scientific journal)

    Publisher: Elsevier BV
  132. Effect of coherency on interphase boundary sliding in NiAl(β) bicrystals with film-like Ni3Al(γ′) precipitate along boundary

    T. Sakata, H.Y. Yasuda, Y. Umakoshi

    Scripta Materialia Vol. 48 No. 6 p. 749-753 2003/03 Research paper (scientific journal)

    Publisher: Elsevier BV
  133. Nondestructive evaluation of dislocation structure in cyclically deformed Ni3Fe single crystals using magnetic techniques

    Hiroyuki Y. Yasuda, Akiko Sasaki, Yukichi Umakoshi

    Journal of Applied Physics Vol. 93 No. 3 p. 1472-1476 2003/02 Research paper (scientific journal)

    Publisher: AIP Publishing
  134. Controlling factor for nucleation of martensite at grain boundary in Fe-Ni bicrystals

    M. Ueda, H.Y. Yasuda, Y. Umakoshi

    Acta Materialia Vol. 51 No. 4 p. 1007-1017 2003/02 Research paper (scientific journal)

    Publisher: Elsevier BV
  135. Observation of deformation substructure in fatigued intermetallic alloys using magnetic properties

    Y Umakoshi, HY Yasuda

    DEFECT PROPERTIES AND RELATED PHENOMENA IN INTERMETALLIC ALLOYS Vol. 753 p. 39-44 2003 Research paper (international conference proceedings)

  136. Effect of antiphase boundary on the pseudoelasticity in Fe3Al single crystals

    HY Yasuda, K Nakano, M Ueda, Y Umakoshi

    DEFECT PROPERTIES AND RELATED PHENOMENA IN INTERMETALLIC ALLOYS Vol. 753 p. 279-284 2003 Research paper (international conference proceedings)

  137. Effect of interphase boundary character on mechanical properties in NiAl(beta) bicrystals with Ni3Al(gamma') precipitates along grain boundary

    T Sakata, HY Yasuda, Y Umakoshi

    DEFECT PROPERTIES AND RELATED PHENOMENA IN INTERMETALLIC ALLOYS Vol. 753 p. 297-302 2003 Research paper (international conference proceedings)

  138. Texture Development during Dynamic Recrystallization in Hot-deformed Fe-40at%Al Alloy.

    T. Sakata, H. Kohma, H. Yasuda, Y. Umakoshi

    ISIJ International Vol. 42 No. 8 p. 903-909 2002/08 Research paper (scientific journal)

    Publisher: Iron and Steel Institute of Japan
  139. Strain-rate effects on superplastic properties of coarse-grained iron aluminides: a microstructural examination

    J.P Chu, W Kai, H.Y Yasuda, Y Umakoshi, K Inoue

    Materials Science and Engineering: A Vol. 329-331 p. 878-884 2002/06 Research paper (scientific journal)

    Publisher: Elsevier BV
  140. Preparation of Porous Hydroxyapatite/&alpha;-Tricalcium Phosphate Composites by a Colloidal Process

    Hiroyuki&nbsp, Y. Yasuda, Shigeo Mahara, Naohiro Terashita, Yukichi Umakoshi

    MATERIALS TRANSACTIONS Vol. 43 No. 6 p. 1332-1335 2002/06 Research paper (scientific journal)

    Publisher: Japan Institute of Metals
  141. Fatigue mechanism in Ni3Fe single crystals with L12 superlattice structure

    H.Y. Yasuda, D. Furuta, A. Sasaki, A. Izaki, Y. Umakoshi

    Acta Materialia Vol. 50 No. 10 p. 2715-2724 2002/06 Research paper (scientific journal)

    Publisher: Elsevier BV
  142. Microstructure Control for Developing Fe-Pd Ferromagnetic Shape Memory Alloys

    YASUDA Hiroyuki Y., UMAKOSHI Yukichi

    Bulletin of the Japan Institute of Metals Vol. 41 No. 3 p. 182-185 2002/03/20

    Publisher: The Japan Institute of Metals and Materials
  143. Concurrent Design of Multi-Functional Materials using Bicrystal

    UMAKOSHI Yukichi, YASUDA Hiroyuki, UEDA Masato, SAKATA Toshiya

    Bulletin of the Japan Institute of Metals Vol. 41 No. 3 p. 178-181 2002/03/20

    Publisher: The Japan Institute of Metals and Materials
  144. Preparation of hydroxyapatite/alpha-tricalcium phosphate composites by colloidal process

    H. Y. Yasuda, S. Mahara, T. Nishiyama, Y. Umakoshi

    SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS Vol. 3 No. 1 p. 29-33 2002/03 Research paper (scientific journal)

  145. Formation of deformation bands and precipitation of Ni 3 Al(γ′) phase in NiAl(β)-based single crystals by thermomechanical processing

    T. Sakata, H.Y. Yasuda, Y. Umakoshi

    Intermetallics Vol. 10 No. 2 p. 139-147 2002/02 Research paper (scientific journal)

    Publisher: Elsevier BV
  146. Preparation of hydroxyapatite-based composites by colloidal process

    HY Yasuda, S Mahara, T Nishiyama, N Terashita, Y Umakoshi

    TISSUE ENGINEERING FOR THERAPEUTIC USE 6 Vol. 1243 p. 155-160 2002 Research paper (international conference proceedings)

  147. Microstructure control for developing Fe-Pd ferromagnetic shape memory alloys

    H.Y. Yasuda, N. Komoto, M. Ueda, Y. Umakoshi

    Science and Technology of Advanced Materials Vol. 3 No. 2 p. 165-169 2002/01 Research paper (scientific journal)

    Publisher: Informa UK Limited
  148. Effect of grain boundary on martensite transformation behaviour in Fe–32 at.%Ni bicrystals

    Masato Ueda, Hiroyuki Yasuda, Yukichi Umakoshi

    Science and Technology of Advanced Materials Vol. 3 No. 2 p. 171-179 2002/01 Research paper (scientific journal)

    Publisher: Informa UK Limited
  149. Cyclic deformation behaviour of γ′-Ni3(Al, Ti) single crystal containing disordered γ precipitates

    H.Y. Yasuda, R. Jimba, Y. Umakoshi

    Acta Materialia Vol. 50 No. 1 p. 161-169 2002/01 Research paper (scientific journal)

    Publisher: Elsevier BV
  150. Concurrent design for NiAl-based (β/γ′) two-phase alloys by controlling microstructure and texture

    Toshiya Sakata, Hiroyuki Yasuda, Yukichi Umakoshi

    Science and Technology of Advanced Materials Vol. 3 No. 2 p. 157-164 2002/01 Research paper (scientific journal)

    Publisher: Informa UK Limited
  151. Stress-induced martensitic transformation in Fe–Ni bicrystals

    M. Ueda, H.Y. Yasuda, Y. Umakoshi

    Acta Materialia Vol. 49 No. 20 p. 4251-4258 2001/12 Research paper (scientific journal)

    Publisher: Elsevier BV
  152. Control of microstructure and orientation distribution in Ni–Al-based (β/γ′) two phase alloys by thermomechanical processing

    T. Sakata, H.Y. Yasuda, Y. Umakoshi

    Acta Materialia Vol. 49 No. 20 p. 4231-4239 2001/12 Research paper (scientific journal)

    Publisher: Elsevier BV
  153. Microstructure and Mechanical Property of Hydroxyapatite/Calcium-Deficient Hydroxyapatite Composites Prepared by a Colloidal Process

    Hiroyuki&nbsp, Y. Yasuda, Shigeo Mahara, Yukichi Umakoshi

    MATERIALS TRANSACTIONS Vol. 42 No. 11 p. 2392-2397 2001/11 Research paper (scientific journal)

    Publisher: Japan Institute of Metals
  154. Development of Microstructure and Texture in Rapidly Solidified and Annealed Ni-Al Alloys

    Toshiya Sakata, Hiroyuki Y. Yasuda, Yukichi Umakoshi

    MATERIALS TRANSACTIONS Vol. 42 No. 11 p. 2382-2385 2001/11 Research paper (scientific journal)

    Publisher: Japan Institute of Metals
  155. Effect of grain boundary character on the martensitic transformation in Fe–32at.%Ni bicrystals

    M Ueda, H.Y Yasuda, Y Umakoshi

    Acta Materialia Vol. 49 No. 17 p. 3421-3432 2001/10 Research paper (scientific journal)

    Publisher: Elsevier BV
  156. Recrystallization texture in cold-rolled Co3Ti polycrystals

    H.Y Yasuda, S Yamamura, Y Umakoshi

    Scripta Materialia Vol. 44 No. 5 p. 765-769 2001/03 Research paper (scientific journal)

    Publisher: Elsevier BV
  157. Fatigue behavior and magnetic property of Ni3(Al,Ti) single crystals deformed at high temperatures

    H.Y Yasuda, A Sasaki, Y Umakoshi, S Takahashi

    Scripta Materialia Vol. 44 No. 4 p. 581-586 2001/03 Research paper (scientific journal)

    Publisher: Elsevier BV
  158. Control of microstructure and crystal orientation distribution in NiAl-based (beta/gamma') two phase alloys by thermomechanical processing

    T Sakata, HY Yasuda, Y Umakoshi

    PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II p. 859-862 2001 Research paper (international conference proceedings)

  159. K-2307 Control of Interface for Developing Fe-Pd Ferromagnetic Shape Memory Alloys

    YASUDA Hiroyuki Y., KOUMOTO Naoki, Umakoshi Yukichi

    The proceedings of the JSME annual meeting Vol. 1 p. 561-562 2001

    Publisher: The Japan Society of Mechanical Engineers
  160. Effect of microstructure on field-induced strain in Fe-Pd ferromagnetic shape memory alloys

    HY Yasuda, N Koumoto, Y Umakoshi

    PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II p. 1707-1710 2001 Research paper (international conference proceedings)

  161. Microstructural Evolution in Superplastic Coarse-Grained Fe-27at.%Al: Strain-Rate Effects

    J.P. Chu, S.H. Chen, Hiroyuki Y. Yasuda, Yukichi Umakoshi, Kanryu Inoue

    Materials Science Forum Vol. 357-359 p. 205-212 2001/01 Research paper (scientific journal)

    Publisher: Trans Tech Publications, Ltd.
  162. Cyclic deformation and deformation substructure in L1<inf>2</inf>-type intermetallic compounds

    Umakoshi, Y., Yasuda, H.Y., Sasaki, A., Furuta, D.

    International Journal of Materials and Product Technology No. SPEC. ISS. VOL.1 2001 Research paper (scientific journal)

  163. Magnetic observation of deformation substructure in cyclically deformed Ni3Fe single crystals

    Hiroyuki Y. Yasuda, Daizoh Furuta, Akiko Sasaki, Yukichi Umakoshi

    Journal of Applied Physics Vol. 88 No. 10 p. 5909-5914 2000/11/15 Research paper (scientific journal)

    Publisher: AIP Publishing
  164. Microstructure and mechanical property of synthesized hydroxyapatite prepared by colloidal process

    H.Y Yasuda, S Mahara, Y Umakoshi, S Imazato, S Ebisu

    Biomaterials Vol. 21 No. 20 p. 2045-2049 2000/10 Research paper (scientific journal)

    Publisher: Elsevier BV
  165. Electron backscattered diffraction study on superplastic coarse-grained Fe-27 at.%Al: processing effects

    JP Chu, HY Yasuda, Y Umakoshi, K Inoue

    INTERMETALLICS Vol. 8 No. 9-11 p. 1075-1079 2000/09 Research paper (scientific journal)

  166. Formation process of transformation texture from the β to α phase in Cu-42mass%Zn alloy

    T Sakata, H.Y Yasuda, Y Umakoshi

    Scripta Materialia Vol. 43 No. 5 p. 411-416 2000/08 Research paper (scientific journal)

    Publisher: Elsevier BV
  167. Effect of long-range order on the cyclic deformation behaviour of Ni3Fe single crystals

    H.Y Yasuda, D Furuta, Y Umakoshi

    Acta Materialia Vol. 48 No. 13 p. 3401-3408 2000/08 Research paper (scientific journal)

    Publisher: Elsevier BV
  168. Electron backscattered diffraction study on superplastic properties of coarse-grained Fe-27at.% Al based alloys

    J. P. Chu, S. H. Chen, H. Y. Yasuda, Y. Umakoshi, K. Inoue

    Key Engineering Materials Vol. 177-180 p. 637-642 2000 Research paper (scientific journal)

    Publisher: Trans Tech Publications Ltd
  169. Electron backscattered diffraction study on superplastic properties of coarse-grained Fe-27 at% Al

    J.P. Chu, J.H. Wu, H.Y. Yasuda, Y. Umakoshi, K. Inoue

    Intermetallics Vol. 8 No. 1 p. 39-46 2000/01 Research paper (scientific journal)

    Publisher: Elsevier BV
  170. Variant selection in transformation texture from the β to α phase in Cu–40 mass% Zn alloy

    H.Y. Yasuda, T. Sakata, Y. Umakoshi

    Acta Materialia Vol. 47 No. 6 p. 1923-1933 1999/04 Research paper (scientific journal)

    Publisher: Elsevier BV
  171. Fatigue behavior of Fe-48at.%al polycrystals with B2 structure at high temperatures

    H.Y Yasuda, A Behgozin, Y Umakoshi

    Scripta Materialia Vol. 40 No. 2 p. 203-207 1998/12 Research paper (scientific journal)

    Publisher: Elsevier BV
  172. Effect of deformation temperature on fatigue and fracture behavior in TiAl polysynthetically twinned crystals

    Y. Umakoshi, H. Y. Yasuda, T. Nakano, K. Ikeda

    Metallurgical and Materials Transactions A Vol. 29 No. 13 p. 943-950 1998/03 Research paper (scientific journal)

    Publisher: Springer Science and Business Media LLC
  173. Fatigue, Cyclic Deformation and Microstructure. Effect of V and Nb Addition on the Fatigue Behaviour of TiAl Polysynthetically Twinned Crystals.

    Hiroyuki Y. Yasuda, Takayoshi Nakano, Jun Nakazawa, Yukichi Umakoshi

    ISIJ International Vol. 37 No. 12 p. 1210-1217 1997/12 Research paper (scientific journal)

    Publisher: Iron and Steel Institute of Japan
  174. Anomalous behaviour of cyclic deformation and fatigue properties of TiAl PST crystals under constant applied stress

    T. Nakano, H.Y. Yasuda, N. Higashitanaka, Y. Umakoshi

    Acta Materialia Vol. 45 No. 11 p. 4807-4821 1997/11 Research paper (scientific journal)

    Publisher: Elsevier BV
  175. Fatigue and Fracture Behaviour of TiAl alloys

    H. Y. Yasuda, T. Nakano, Y. Umakoshi

    Proceedings of Osaka University-University of Nottingham Joint Symposium, pp.140 1997/09 Research paper (international conference proceedings)

  176. The tensile creep behavior of superplastic tetragonal zirconia doped with small amounts of SiO2

    K. Hiraga, H.Y. Yasuda, Y. Sakka

    Materials Science and Engineering: A Vol. 234-236 p. 1026-1029 1997/08 Research paper (scientific journal)

    Publisher: Elsevier BV
  177. Cavity damage accumulation and fracture in SiO2-doped zirconia during superplastic deformation

    H.Y. Yasuda, K. Hiraga

    Materials Science and Engineering: A Vol. 234-236 p. 343-346 1997/08 Research paper (scientific journal)

    Publisher: Elsevier BV
  178. Decomposition of [011]superlattice dislocations in cyclically deformed TiAl polysynthetically twinned crystals

    H.Y. Yasuda, T. Nakano, Y. Umakoshi

    Philosophical Magazine Letters Vol. 73 No. 5 p. 225-232 1996/05 Research paper (scientific journal)

    Publisher: Informa UK Limited
  179. The deformation substructure in cyclically deformed TiAl PST crystals

    H. Y. Yasuda, T. Nakano, Y. Umakoshi

    Philosophical Magazine A Vol. 73 No. 4 p. 1035-1051 1996/04 Research paper (scientific journal)

    Publisher: Informa UK Limited
  180. Effect of lamellar structure and plastic anisotropy on the cyclic deformation and fatigue behaviour of TiAl PST crystals

    H. Y. Yasuda, T. Nakano, Y. Umakoshi

    Philosophical Magazine A Vol. 73 No. 4 p. 1053-1067 1996/04 Research paper (scientific journal)

    Publisher: Informa UK Limited
  181. Fatigue Behavior and Fracture Mechanizm of Intermetallics -- The Role of Lamellar Structure on the Fatigue Behavior of TiAl-PST Crystals --

    Hiroyuki Y. Yasuda, Takayoshi Nakano, Yukichi Umakoshi

    1996/01

  182. Thermal stability of deformation substructure of cyclically deformed TiAl PST crystals

    H.Y. Yasuda, T. Nakano, Y. Umakoshi

    Intermetallics Vol. 4 No. 4 p. 289-298 1996/01 Research paper (scientific journal)

    Publisher: Elsevier BV
  183. Plastic anisotropy and fatigue of TiAl PST crystals: a review

    Y. Umakoshi, H.Y. Yasuda, T. Nakano

    Intermetallics Vol. 4 p. S65-S75 1996/01 Research paper (scientific journal)

    Publisher: Elsevier BV
  184. Deformation and fracture of TiAl PST crystals under monotonic and cyclic loading

    Umakshi, Y., Nakano, T., Yasuda, H.Y.

    Acta Metallurgica Sinica Series A, Physical Metallurgy &amp; Materials Science Vol. 8 No. 4-6 p. 329-338 1995/08 Research paper (scientific journal)

  185. Effect of lamellar structure on fracture behavior of TiAl polysynthetically twinned crystals

    T. Nakano, T. Kawanaka, H.Y. Yasuda, Y. Umakoshi

    Materials Science and Engineering: A Vol. 194 No. 1 p. 43-51 1995/04 Research paper (scientific journal)

    Publisher: Elsevier BV
  186. Plastic anisotropy and fracture behavior of cyclically deformed TiAl polysynthetically twinned crystals

    Y. Umakoshi, H.Y. Yasuda, T. Nakano

    Materials Science and Engineering: A Vol. 192-193 p. 511-517 1995/02 Research paper (scientific journal)

    Publisher: Elsevier BV
  187. Cyclic deformation behaviour of Ti-Al alloys containing oriented lamellae

    Yasuda, H.Y., Nakano, T., Umakoshi, Y.

    Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties Vol. 71 No. 1 1995 Research paper (scientific journal)

  188. Fatigue behaviour of TiAl intermetallic compounds

    NAKANO Takayoshi, Hiroyuki Yasuda, Yukichi Umakoshi

    Vol. 80 No. 9 p. Np469-471 1994/09

    Publisher:
  189. THE EFFECT OF ORIENTATION AND LAMELLAR STRUCTURE ON THE FATIGUE BEHAVIOUR OF TIAL PST CRYSTALS

    Y UMAKOSHI, HY YASUDA, Y NAKANO

    STRENGTH OF MATERIALS p. 345-348 1994 Research paper (international conference proceedings)

  190. Fracture Behaviour of TiAl Crystals Containing Oriented Lamellae

    T. Nakano, K. Kawanaka, H. Y. Yasuda, Y. Umakoshi

    Proceedings of 3rd Japan International SAMPE Symposium, pp.1334 1993/12 Research paper (international conference proceedings)

  191. Cyclic Deformation and Fatigue Behaviour of TiAl Crystals Containing Oriented Lamellae

    Y. Umakoshi, H. Y. Yasuda, T. Nakano

    Proceedings of 3rd Japanese International SAMPE symposium, pp.1329 1993/12 Research paper (international conference proceedings)

Misc. 34

  1. 航空機エンジン用TiAl タービンブレードのAM

    安田弘行, 趙研, 竹山雅夫, 中野貴由

    スマートプロセス学会誌 Vol. 14 No. 4 p. 175-180 2025/07 Article, review, commentary, editorial, etc. (scientific journal)

  2. Custom Mechano-Functional Control by Formation of Specific Interfaces via Metal 3D Printing-Learning from Hierarchical Anisotropic Architecture in Bone

    中野貴由, 石本卓也, 石本卓也, 松垣あいら, 小笹良輔, GOKCEKAYA Ozkan, 安田弘行, 趙研, 小泉雄一郎, 奥川将行, 吉矢真人, 藤井進, 多根正和, 多根正和, 三好英輔, 東野昭太, 東野昭太

    まてりあ(Web) Vol. 63 No. 1 2024

  3. 金属3Dプリンティングの特異界面形成によるカスタム力学機能制御学の構築 : 階層化異方性骨組織に学びつつ—Custom Mechano-Functional Control by Formation of Specific Interfaces via Metal 3D Printing : Learning from Hierarchical Anisotropic Architecture in Bone—特集 ナノスケール動的挙動の理解に基づく力学特性発現機構の解明(2)

    中野 貴由, 石本 卓也, 松垣 あいら, 小笹 良輔, ゴクチェカヤ オズカン, 安田 弘行, 趙 研, 小泉 雄一郎, 奥川 将行, 吉矢 真人, 藤井 進, 多根 正和, 三好 英輔, 東野 昭太

    まてりあ = Materia Japan Vol. 63 No. 1 p. 36-41 2024/01

    Publisher: 仙台 : 日本金属学会 ; 1994-
  4. Improvement of High Temperature Fatigue Properties of TiAl Alloys Fabricated by Electron Beam Powder Bed Fusion through Hot Isostatic Pressing Process

    趙研, 安田弘行, 趙研, 安田弘行, 當代光陽, 上田実, 竹山雅夫, 中野貴由, 中野貴由

    スマートプロセス学会学術講演会講演概要 Vol. 2021 2021

  5. High Precision Manufacturing and Microstructure Control of β-containing γ-TiAl Alloy through Electron Beam Melting

    趙研, 趙研, 川端はじめ, 尾堂裕隆, 林竜弘, 安田弘行, 安田弘行, 竹山雅夫, 中野貴由, 中野貴由

    スマートプロセス学会誌 Vol. 10 No. 4 2021

  6. Improvement of strength of β-containing γ-TiAl alloys through formation of unique microstructure using electron beam melting

    林竜弘, 趙研, 安田弘行, 竹山雅夫, 中野貴由

    軽金属学会大会講演概要 Vol. 140th 2021

  7. Unique Microstructure and Mechanical Properties of TiAl Alloys Fabricated by Electron Beam Melting

    Vol. 67 No. 4 p. 290-296 2019/10

    Publisher: 日本チタン協会
  8. 電子ビーム三次元積層造形法で作製したTiAl合金における特異バンド状組織と疲労特性の関係

    趙研, 福岡拓馬, 尾堂裕隆, 安田弘行, 當代光陽, 池田亜矢子, 近藤大介, 唐土庄太郎, 上田実, 竹山雅夫, 中野貴由

    日本金属学会講演概要(CD-ROM) Vol. 164th 2019

  9. 電子ビーム三次元積層造形法で作製したTiAl合金造形体の形状が微細組織および力学特性に与える影響

    川端はじめ, 趙研, 安田弘行, 當代光陽, 上田実, 竹山雅夫, 中野貴由

    軽金属学会大会講演概要 Vol. 137th 2019

  10. 電子ビーム三次元積層造形を用いた特異バンド状組織制御によるTiAl合金の高延性化

    趙研, 坂田将啓, 安田弘行, 當代光陽, 上田実, 竹山雅夫, 中野貴由

    日本金属学会講演大会(Web) Vol. 165th 2019

  11. 電子ビーム三次元積層造形法で作製したTiAl合金造形体の形状が微細組織に与える影響

    川端はじめ, 趙研, 安田弘行, 當代光陽, 上田実, 竹山雅夫, 中野貴由

    日本金属学会講演大会(Web) Vol. 165th 2019

  12. 電子ビーム三次元積層造形法で作製したTiAl合金の室温疲労特性向上

    尾堂裕隆, 趙研, 安田弘行, 當代光陽, 上田実, 竹山雅夫, 中野貴由

    日本金属学会講演大会(Web) Vol. 165th 2019

  13. 電子ビーム三次元積層造形法で作製したTiAl合金における特異バンド状組織の形態制御と力学特性向上

    趙研, 坂田将啓, 安田弘行, 中野貴由, 當代光陽, 池田亜矢子, 近藤大介, 唐土庄太郎, 上田実, 竹山雅夫

    日本金属学会講演概要(CD-ROM) Vol. 163rd 2018

  14. 電子ビーム三次元積層造形法で作製したTiAl合金の組織制御と高温疲労特性改善

    福岡拓馬, 趙研, 安田弘行, 中野貴由, 當代光陽, 池田亜矢子, 近藤大介, 唐土庄太郎, 上田実, 竹山雅夫

    日本金属学会講演概要(CD-ROM) Vol. 163rd 2018

  15. 電子ビーム三次元積層造形法におけるTiAl合金造形体の形状と微細組織の関係

    川端はじめ, 趙研, 安田弘行, 中野貴由, 當代光陽, 池田亜矢子, 近藤大介, 唐土庄太郎, 上田実, 竹山雅夫

    日本金属学会講演概要(CD-ROM) Vol. 163rd 2018

  16. 伝熱解析による電子ビーム三次元積層造形法を用いて作製したTiAl合金の組織予測

    池田亜矢子, 趙研, 安田弘行, 中野貴由, 當代光陽, 近藤大介, 長町悠斗, 上田実, 竹山雅夫

    日本金属学会講演概要(CD-ROM) Vol. 162nd 2018

  17. 電子ビーム三次元積層造形法で作製したTiAl合金の特異バンド状組織制御による室温延性の向上

    坂田将啓, 趙研, 安田弘行, 當代光陽, 中野貴由, 池田亜矢子, 近藤大介, 長町悠斗, 上田実, 竹山雅夫

    日本金属学会講演概要(CD-ROM) Vol. 162nd 2018

  18. 電子ビーム三次元積層造形法で作製したTiAl合金における室温延性向上に向けた微細組織の最適化

    趙研, 森田尚秀, 安田弘行, 當代光陽, 中野貴由, 池田亜矢子, 近藤大介, 長町悠斗, 上田実, 竹山雅夫

    日本金属学会講演概要(CD-ROM) Vol. 162nd 2018

  19. 電子ビーム三次元積層造形法で作製したTiAl合金の微細組織と引張特性に及ぼす熱処理の影響

    坂田将啓, 趙研, 安田弘行, 中野貴由, 當代光陽, 池田亜矢子, 近藤大介, 長町悠斗, 上田実, 竹山雅夫

    日本金属学会講演概要(CD-ROM) Vol. 161st 2017

  20. 電子ビーム三次元積層造形法で作製したTiAl合金におけるバンド状γ等軸粒が室温延性に及ぼす影響

    森田尚秀, 趙研, 安田弘行, 中野貴由, 當代光陽, 池田亜矢子, 近藤大介, 長町悠斗, 上田実, 竹山雅夫

    日本金属学会講演概要(CD-ROM) Vol. 161st 2017

  21. 電子ビーム三次元積層造形法で作製したTiAl合金の微細組織と力学特性に及ぼす熱処理の影響

    森田尚秀, 趙研, 安田弘行, 當代光陽, 中野貴由, 池田亜矢子, 近藤大介, 長町悠斗, 上田実, 竹山雅夫

    日本金属学会講演概要(CD-ROM) Vol. 160th 2017

  22. 電子ビーム三次元積層造形法で作製したTiAl合金の熱間等方圧加圧処理による微細組織制御と疲労特性改善

    趙研, 小林良太, 安田弘行, 當代光陽, 中野貴由, 池田亜矢子, 近藤大介, 長町悠斗, 上田実, 竹山雅夫

    日本金属学会講演概要(CD-ROM) Vol. 160th 2017

  23. D0[3]型Fe基化合物の特異な擬弾性 (特集 構造用金属間化合物の最近の進展)

    安田 弘行, 馬越 佑吉

    金属 Vol. 80 No. 7 p. 567-573 2010/07

    Publisher: アグネ技術センター
  24. J-PARC中性子その場観察によるD03型Fe基化合物の擬弾性挙動の解明

    丸山武紀, 安田弘行, 伊藤崇芳, ステファヌス ハルヨ

    日本金属学会講演概要 Vol. 147th 2010

  25. :Overview Based on Complied Statistics

    Mishima Yoshinao, Inui Haruyuki, Takeyama Masao, Takanashi Kouki, Nakatani Ryoichi, Miura Seiji, Yoshimi Kyousuke, Hosoda Hideki, Nakano Takayoshi, Kimura Yoshisato, Yasuda Hiroyuki, Hata Satoshi

    Bulletin of the Japan Institute of Metals Vol. 46 No. 4 p. 278-283 2007

    Publisher: The Japan Institute of Metals and Materials
  26. Ni基化合物の劣化・損傷の磁気評価

    安田 弘行, 馬越 佑吉

    検査技術 Vol. 11 No. 10 p. 9-14 2006/10

    Publisher: 日本工業出版
  27. Fe3AlのAPB擬弾性とその応用 (特集 インターメタリックスの新たな応用を求めて)

    安田 弘行, 馬越 佑吉

    金属 Vol. 76 No. 7 p. 749-753 2006/07

    Publisher: アグネ技術センター
  28. 強磁性形状記憶合金の結晶組織制御技術 (特集 マルチフェロイクス材料・デバイス研究開発への新展開)

    安田 弘行, 馬越 佑吉

    金属 Vol. 76 No. 4 p. 386-389 2006/04

    Publisher: アグネ技術センター
  29. Martensitic transformation behaviour and its dependence on grain boundary character in Fe-Ni bicrystals

    UMAKOSHI Yukichi

    Vol. 16 No. 6 p. 1529-1529 2003/09/01

  30. Observation of lattice defects in crystals using magnetic anisotropy

    YASUDA Hiroyuki

    Vol. 12 No. 6 p. 1366-1366 1999/09/01

  31. Crystallography of the precipitation of Ni_3Al in NiAl-based alloys

    SAKATA Toshiya

    Vol. 12 No. 6 p. P-32 1999/09/01

  32. Grain boundary character dependence on Martensitic transformation in Fe-Ni bicrystals

    UEDA Masato

    Vol. 12 No. 6 p. 1285-1285 1999/09/01

  33. Plastic behavior of TiAl PST crystals under cyclic loading conditions

    Y Umakoshi, HY Yasuda, T Nakano, J Nakazawa

    GAMMA TITANIUM ALUMINIDES p. 697-707 1995

  34. Role of lamellar structure in the plastic behavior of TiAl alloys

    Y. Umakoshi, T. Nakano, H. Y. Yasuda

    Proceedings of the TMS Fall Meeting p. 151-169 1994/12/01

Publications 8

  1. デジタル化時代のadditive manufacturingの基礎と応用

    中野, 貴由, 桐原, 聡秀, 近藤, 勝義, 西川, 宏, 田中, 学, スマートプロセス学会

    リブロ社 2022/01

    ISBN: 9784915697371

  2. 鉄の事典

    安田弘行

    朝倉書店 2014/12 Scholarly book

  3. Advanced Materials Design for Fe-based Shape Memory Alloys through Structural Control, in Progress in Advanced Structural and Functional Materials Design

    H. Y. Yasuda

    Springer 2012/12 Scholarly book

  4. rare metal handbook

    H. Y. Yasuda

    2011/01 Scholarly book

  5. Self Hearing Materials

    J. Th. M. De Hosson and H. Y. Yasuda

    Springer 2008/01

  6. 未来型アクチュエータ材料・デバイス

    古屋, 泰文, 樋口, 俊郎, 今泉, 伸夫, 馬越佑吉、安田弘行他

    シーエムシー出版 2006/12

    ISBN: 4882315866

  7. 分散技術大全集

    馬越佑吉、安田弘行他

    情報機構 2005

    ISBN: 4901677403

  8. Nondestruction Lifetime Prediction by Magnetic Measurements

    Y. Umakoshi and H.Y. Yasuda

    Elsevier 2004/11

Works 33

  1. 高性能TiAl基合金動翼の粉末造形プロセス開発と基盤技術構築

    安田 弘行

    2018 -

  2. 非等量配合高エントロピー合金における結晶粒超微細化と変形挙動の解明

    安田 弘行

    2017 -

  3. 方向制御層状TiAlタービン翼の製造技術開発

    安田 弘行

    2014 -

  4. 新規析出強化機構を利用した鉄系超耐熱合金の開発

    安田 弘行

    2014 -

  5. マルチスケールその場観察によるFe基化合物の新規な超弾性挙動の解明

    安田 弘行

    2012 -

  6. 自動車用ギガパスカル級制振材料の開発

    2010 -

  7. グローバルCOE 構造・機能先進材料デザイン教育研究拠点

    2009 -

  8. 広動作温度範囲を有するFe系マルチモード超弾性合金の開発

    2009 -

  9. 転位の可逆運動を利用したFe-Al-Ga系超弾性合金の研究開発

    2009 -

  10. 自動車用ギガパスカル級制振材料の開発

    2009 -

  11. 広動作温度範囲を有するFe系マルチモード超弾性合金の開発

    2008 -

  12. 転位の可逆運動を利用したFe-Al-Ga系超弾性合金の研究開発

    2008 -

  13. 高減衰能を有するFeアルミナイド超弾性鋼板の創製

    2008 -

  14. 相安定性制御による転位型Fe-Al超弾性合金の高性能化

    2007 -

  15. 21世紀COE構造・機能先進材料デザイン研究拠点の形成

    2007 -

  16. 高減衰能を有するFeアルミナイド超弾性鋼板の創製

    2007 -

  17. 新規Fe-Al超弾性合金の制振特性向上のための合金設計

    2006 -

  18. 21世紀COE構造・機能先進材料デザイン研究拠点の形成

    2006 -

  19. アトミスティック・メタラジーによる第3世代金属間化合物研究への新展開

    2006 -

  20. マルテンサイト変態を必要としないFe-Ga系超弾性合金の開発

    2006 -

  21. マルテンサイト変態を必要としないFe-Ga系超弾性合金の開発

    2005 -

  22. 転位の可逆運動による新超弾性挙動と繊維ネット超弾性合金の開発

    2004 -

  23. フロンティア研究拠点構想、微細構造制御・格子欠陥評価

    2004 -

  24. 21世紀COE構造・機能先進材料デザイン研究拠点の形成

    2004 -

  25. 磁気特性変化による複相合金中の格子欠陥の同定と変形機構解明、材料信頼性評価

    2004 -

  26. 材料の耐久性デザインを決定する変形・破壊の本質に関する研究調査

    2004 -

  27. マルテンサイト変態を必要としないFe系超弾性合金の合金設計

    2004 -

  28. 複合機能化への材料協調設計

    1999 -

  29. Concurrent Designs for Multi-functional Materials

    1999 -

  30. Fe-Al合金の超塑性

    1998 -

  31. 再生医工学

    1998 -

  32. Superplasticity in Fe-Al alloys

    1998 -

  33. (BLANK)

    1998 -

Industrial Property Rights 4

  1. チタン‐アルミニウム合金

  2. 制振合金材料および自動車用振動吸収材

  3. 材料の寿命評価方法、及び疲労破壊の防止方法

  4. Fe-Al系超弾性合金の作製方法

Media Coverage 4

  1. 高強度・高延性を確立 阪大など チタンアルミ合金開発

    2021/07

  2. 振動吸収の高強度合金 阪大が開発、実用化めざす

    2012/11

  3. 鉄アルミニウム合金もろさ克服 高性能エンジンに道

    2003/02

  4. 金属疲労の発見はやく

    2002/06

Institutional Repository 8

Content Published in the University of Osaka Institutional Repository (OUKA)
  1. Superimpositional design of crystallographic textures and macroscopic shapes via metal additive manufacturing—Game-change in component design

    Ishimoto Takuya, Morita Naotaka, Ozasa Ryosuke, Matsugaki Aira, Gokcekaya Ozkan, Higashino Shota, Tane Masakazu, Mayama Tsuyoshi, Cho Ken, Yasuda Y. Hiroyuki, Okugawa Masayuki, Koizumi Yuichiro, Yoshiya Masato, Egusa Daisuke, Sasaki Taisuke, Abe Eiji, Kimizuka Hajime, Ikeo Naoko, Nakano Takayoshi

    Acta Materialia Vol. 286 2025/03/01

  2. Stress increase by nanoscale hcp precipitates in HfNbTaTiZr high entropy alloys

    Yasuda Hiroyuki Y., Yamada Yusuke, Onishi Masato, Suzuki Hiroki, Cho Ken, Ichikawa Satoshi, Nagase Takeshi

    Scripta Materialia Vol. 255 2025/01/15

  3. Influence of Input Energy Density on Morphology of Unique Layered Microstructure of γ-TiAl Alloys Fabricated by Electron Beam Powder Bed Fusion

    Cho Ken, Morita Naohide, Matsuoka Hiromasa, Yasuda Hiroyuki Y., Todai Mitsuharu, Ueda Minoru, Takeyama Masao, Nakano Takayoshi

    Materials Transactions Vol. 64 No. 1 p. 44-49 2023/01/01

  4. Peculiar microstructural evolution and tensile properties of β-containing γ-TiAl alloys fabricated by electron beam melting

    Cho Ken, Kawabata Hajime, Hayashi Tatsuhiro, Yasuda Hiroyuki Y., Nakashima Hirotoyo, Takeyama Masao, Nakano Takayoshi

    Additive Manufacturing Vol. 46 2021/10/01

  5. Improving the tensile properties of additively manufactured β-containing tial alloys via microstructure control focusing on cellular precipitation reaction

    Cho Ken, Odo Hirotaka, Okamoto Keisuke, Yasuda Hiroyuki Y., Nakashima Hirotoyo, Takeyama Masao, Nakano Takayoshi

    Crystals Vol. 11 No. 7 2021/07/12

  6. Influence of unique layered microstructure on fatigue properties of Ti-48Al-2Cr-2Nb alloys fabricated by electron beam melting

    Cho Ken, Kobayashi Ryota, Oh Jong Yeong, Yasuda Hiroyuki Y., Todai Mitsuharu, Nakano Takayoshi, Ikeda Ayako, Ueda Minoru, Takeyama Masao

    Intermetallics Vol. 95 p. 1-10 2018/04/01

  7. Fe₃Ga単結晶の低温における超弾性挙動

    安田 弘行

    大阪大学低温センターだより Vol. 151 p. 14-19 2010/07

  8. 方向制御層状組織を有するTiAlの疲労特性に関する研究

    安田 弘行