JA

Profile

Research

Social

Other

Tanaka Toshihiro

田中 敏宏

Executive Vice President

Education

  • - 1985/03, Osaka University, Graduate School, Division of Engineering
  • - 1985, Osaka University, Graduate School, Division of Engineering
  • - 1980/03, Osaka University, Faculty of Engineering
  • - 1980, Osaka University, Faculty of Engineering

Research History

  • 2019/09/01 - Present, Osaka University, Vice-President
  • 2002/10 - Present, Osaka University
  • 1995/04 - Present, Osaka University, Associate Professor
  • 1985/04 - Present, Osaka University
  • 2002/10/01 - 2019/08/31, Osaka University Graduate School of Engineering Division of Materials and Manufacturing Science, Professor
  • 2015/08 - 2019/08, Osaka University, Graduate School of Engineering
  • 1998/04/01 - 2002/09/30, Osaka University Graduate School of Engineering Division of Materials and Manufacturing Science, Associate Professor
  • 1995 - 2002, Osaka University
  • 1985 - 1995, Osaka University, Research Associate
  • 2002 - , - Osaka University, Professor

Research Areas

  • Nanotechnology/Materials, Metals and resources production
  • Nanotechnology/Materials, Inorganic materials
  • Nanotechnology/Materials, Metallic materials

Professional Memberships

  • 高温学会
  • 日本マイクログラビテイー応用学会
  • (社)日本鉄鋼協会
  • 日本マイクログラビティ応用学会
  • 日本結晶成長学会
  • 日本熱物性学会
  • 日本鉄鋼協会
  • 日本金属学会

Papers

  • Design of Molten Pool Geometry in Additive Manufacturing by Analysis of Inverse Problems, Masashi NANAMOTO,Toshihiro TANAKA, Journal of Smart Processing, Sumart Processing Society for Minerals, Environment and Energy, Vol. 10, No. 4, p. 220-223, 2021/07
  • Designing of Flux Composition in Copper Alloy Melting Process to Achieve Good Balance between Suppression of Refractory Corrosion and Acceleration of MnO Dissolution into Flux Using Neural Network and Thermodynamic Computation, Itaru Hasegawa,Takuya Koizumi,Kazuhiko Kita,Masanori Suzuki,Toshihiro Tanaka, Journal of the Japan Institute of Metals and Materials, Japan Institute of Metals, Vol. 85, No. 7, p. 247-255, 2021/07/01
  • Dynamic Changes in Interfacial Tension between Liquid Fe Alloys and Molten Slag, Toshihiro Tanaka, Vol. 26, No. 6, p. 338-340, 2021/06
  • Effect of Molybdenum Layer Formed at the Inner Surface in Mo/MoO<sub>2</sub>–type Zirconia Oxygen Sensor on Continuous Measurement of Oxygen Content in Molten Steel, Naoya Saeki,Masanori Suzuki,Masashi Nakamoto,Toshihiro Tanaka,Ken Katogi,Hiroaki Kosaka,Kazuma Dozono,Ryota Ishii, ISIJ International, Iron and Steel Institute of Japan, Vol. 61, No. 3, p. 667-673, 2021/03/15
  • Mechanism for Local Corrosion of Solid B<sub>2</sub>O<sub>3</sub> at Water–Gallium Interface Induced by Branched Flow, Itaru Hasegawa,Takuya Koizumi,Kazuhiko Kita,Masanori Suzuki,Toshihiro Tanaka, MATERIALS TRANSACTIONS, Japan Institute of Metals, Vol. 62, No. 3, p. 427-435, 2021/03/01
  • In situ observations of the formation of surface fine crevice structures created by laser irradiation, Jaebong Yeon,Peiyuan Ni,Masashi Nakamoto,Toshihiro Tanaka, Materials Transactions, Vol. 62, No. 2, p. 261-270, 2021/02/01
  • Effect of Sulfur in Slag on Dynamic Change Behavior of Liquid Iron/Molten Slag Interfacial Tension, Masanori Suzuki,Masashi Nakamoto,Toshihiro Tanaka,Yuichi Tsukaguchi,Kazuaki Mishima,Masahito Hanao, ISIJ International, Vol. 60, No. 11, p. 2332-2338, 2020/11/15
  • Erratum: Neural Network Modelling on Contact Angles of Liquid Metals and Oxide Ceramics (ISIJ Int. (2020) 60:8 (1586–1595) DOI: 10.2355/isijinternational.ISIJINT-2019-640), Peiyuan Ni,Hiroki Goto,Masashi Nakamoto,Toshihiro Tanaka, ISIJ International, Vol. 60, No. 11, 2020/11/15
  • Measurement of liquid/liquid interfacial tension with water on liquid paraffin by the floating drop method, Masashi Nakamoto,Yuko Kasai,Toshihiro Tanaka,Takaiku Yamamoto, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 603, 2020/10/20
  • Estimation of the interaction parameters of liquid Fe using neural network computation, Masashi Nakamoto,Toshihiro Tanaka, ISIJ International, Vol. 60, No. 10, p. 2134-2140, 2020/10/15
  • Estimation of activity coefficient of solute in infinite dilute liquid iron based on surface tension of binary liquid Fe alloys, Masashi Nakamoto,Toshihiro Tanaka, ISIJ International, Vol. 60, No. 10, p. 2141-2146, 2020/10/15
  • Dissimilar metal joining of Cu and Fe using super-Spread wetting into surface fine crevice structures, Jaebong Yeon,Takumi Kageyama,Riku Yamada,Peiyuan Ni,Masashi Nakamoto,Toshihiro Tanaka, Materials Transactions, Vol. 61, No. 10, p. 1900-1906, 2020/10/01
  • Joining of metal to ceramic plate using super-spread wetting, Jaebong Yeon,Michiru Yamamoto,Peiyuan Ni,Masashi Nakamoto,Toshihiro Tanaka, Metals, Vol. 10, No. 10, p. 1-10, 2020/10
  • Investigation of refractory corrosion by Na<inf>2</inf>OB<inf>2</inf>O<inf>3</inf>Flux and Its Ability of Dissolving of Mn Oxides during a melting process for a copper alloy in the atmosphere, including mnas easily oxidized element, Itaru Hasegawa,Takuya Koizumi,Masanori Suzuki,Toshihiro Tanaka, Materials Transactions, Vol. 61, No. 9, p. 1820-1828, 2020/09/01
  • Neural network modelling on contact angles of liquid metals and oxide ceramics, Peiyuan Ni,Hiroki Goto,Masashi Nakamoto,Toshihiro Tanaka, ISIJ International, Vol. 60, No. 8, p. 1586-1595, 2020/08/15
  • Wetting Behavior of Zn-Al Liquid on Si-Containing Steel After Surface Oxidation and Reduction Treatment, Masanori Suzuki,Yusuke Fushiwaki,Yusuke Okumura,Toshihiro Tanaka, Metallurgical and Materials Transactions B, Springer Science and Business Media LLC, Vol. 51, No. 2, p. 467-479, 2020/04
  • Dynamic Changes in Interfacial Tension between Liquid Fe Alloy and Molten Slag Induced by Chemical Reactions, Tetsu-to-Hagane, Vol. 106, No. 3, 2020/03
  • 高温融体の界面物性, 中本将嗣,鈴木賢紀,田中敏宏, まてりあ, Vol. 58, No. 11, p. 669-672, 2019/11
  • Mathematical Modelling Study of Dynamic Composition Change of Steel and Mold Flux in Continuous Casting of Steel, Peiyuan NI,Toshihiro TANAKA,Masanori SUZUKI,Masashi NAKAMOTO,Mikael ERSSON,Pär Göran,JÖNSSON, Vol. 59, No. 11, p. 2024-2035, 2019/11
  • Hydroxyl-Group Identification Using O K-edge XAFS in Porous Glass Fabricated by Hydrothermal Reaction and Low-Temperature Foaming, Masanori Suzuki,Shigehiro Maruyama,Norimasa Umesaki,Toshihiro Tanaka, MOLECULES, MDPI, Vol. 24, No. 19, 2019/10
  • Report on Research Internship Held in Osaka University, Yoshihiko Higuchi,Toshihiro Tanaka,Hiroshi Utsunomiya,Akira Kojima,Yoshihisa Kawatani, Bulletin of College of Industrial Technology, Vol. 52, No. 1, p. 105-107, 2019/07
  • Neural network modelling on temperature coefficient of surface tension and its usage in melting point prediction of nanosized metal particles, Jaebong Yeon,Peiyuan Ni,Masashi Nakamoto,Toshihiro Tanaka, Calphad, Vol. 64, p. 267-271, 2019/03
  • Estimation of Interaction Parameters in Liquid Fe by Neural Network Computation, Masashi Nakamoto,Toshihiro Tanaka, Tetsu-to-Hagane, Vol. 105, No. 3, p. 400-406, 2019/03
  • Estimation of Activity Coefficient of Solute in Infinite Dilute Liquid Iron Based on Surface Tension of Binary Liquid Fe Alloys, Masashi Nakamoto,Toshihiro Tanaka, Tetsu-to-Hagane, Vol. 105, No. 3, p. 395-399, 2019/03
  • Selective Evaporation Recovery of Li from Simulated Cathode Material in Li-ion Batteries by Carbonation Reaction, Masashi Nakamoto,Shinsuke Katagiri,Takaiku Yamamoto,Toshihiro Tanaka, Journal of the Japanese Society for Experimental Mechanics, Vol. 18, No. 4, p. 269-272, 2018/12
  • Metal-Metal Joining Using Super-Spread Wetting into Interface Fine Mesh Structure, Jaebong Yeon,Yen-Man Yen,Masashi Nakamoto,Toshihiro Tanaka, Materials Transactions,, 2018/11
  • Development of thermodynamic databases in the system U–Zr–Ce–Cs–Fe–B–C–I–O–H for application to simulating phase equilibria in severe nuclear accidents, Masanori Suzuki,Ken Kurosaki,Shinsuke Yamanaka,Toshihiro Tanaka,Masayoshi Uno,Yukihiro Murakami,Tatjana Jantzen,Stephan Petersen,Klaus Hack, Journal of Nuclear Science and Technology, Taylor and Francis Ltd., Vol. 55, No. 8, p. 885-899, 2018/08/03
  • Structural Behavior of Vanadium Ions in Alkaline Borosilicate Glass for Nuclear Waste Storage, Masanori Suzuki,Norimasa Umesaki,Toshihiro Tanaka,Takahiro Ohkubo,Toshiaki Kakihara,Taku Hashimoto,Hidenori Kawashima, Phys. Chem. Glasses : Eur. J. Glass Sci. Technol. B, Vol. 59, No. 4, p. 181-192, 2018/08
  • Joining of Metals by Super-Spread Wetting on Surface Fine Crevice Structure Created by Reduction-Sintering Copper Oxide Powder, Jaebong Yeon,Yuya Ishida,Masashi Nakamoto,Toshihiro Tanaka, Materials Transactions,, 2018/07
  • Effect of thermal history on high-valence chromium ion dissolution in merwinite (3CaO·MgO·2SiO2), Masanori Suzuki,Norimasa Umesaki,Toshihiro Okajima,Toshihiro Tanaka, Journal of the American Ceramic Society, Blackwell Publishing Inc., Vol. 101, No. 6, p. 2653-2665, 2018/06/01
  • Electrical Conductivity Calculation of Molten Multicomponent Slag by Neural Network Analysis, Yusuke HARAGUCHI,Masashi NAKAMOTO,Masanori SUZUKI,Kiyoshi FUJI-TA,Toshihiro TANAKA, ISIJ INTERNATIONAL, Iron and Steel Institute of Japan, Vol. 58, No. 6, p. 1007-1012, 2018/06
  • 高温融体の界面物理化学の深化 ―“Capillary Metallurgy”の構築を目指して―, 田中敏宏, まてりあ,, 2018/05
  • Distribution and reduction in P concentration of submerged arc welding slag -Trials for reusing welding slag as welding flux-, Kazuhiro Kojima,Masanori Suzuki,Toshihiro Tanaka, Quarterly Journal of the Japan Welding Society, Vol. 36, No. 3, p. 167-174, 2018/01
  • Estimation of thermodynamic parameters in liquid iron, Masashi Nakamoto,Toshihiro Tanaka, Proceedings of 1st International Conference on Energy and Material Efficiency and CO2 Reduction in the Steel Industry (EMECR 2017), p. 552-554, 2017/10
  • The development of the anti-biofouling coating agent using metal nanoparticles and analysis by Raman spectroscopy and FIB system, Katsuhiko Sano,Hideyuki Kanematsu,Nobumitsu Hirai,Akiko Ogawa,Takeshi Kougo,Toshihiro Tanaka, SURFACE & COATINGS TECHNOLOGY, ELSEVIER SCIENCE SA, Vol. 325, p. 715-721, 2017/09
  • The development of the anti-biofouling coating agent using metal nanoparticles and analysis by Raman spectroscopy and FIB system, Katsuhiko Sano,Hideyuki Kanematsu,Nobumitsu Hirai,Akiko Ogawa,Takeshi Kogo,Toshihiro Tanaka, Surface and Coatings Technology, Vol. 25, No. 9, p. 1-7, 2017/09
  • Mechanism of the Unusual Wetting of a Surface Fine Crevice Structure Created by Laser Irradiation, Vilakazi Siboniso,Jaebong Yeon,Christian Grozescu,Hiroki Goto,Masashi Nakamoto,Ryo Matsumoto,Hiroshi Utsunomiya,Toshihiro Tanaka, MATERIALS TRANSACTIONS, Japan Institute of Metals, Vol. 58, No. 8, p. 1227-1230, 2017/08
  • Measurement of interfacial tension between oil and an aqueous solution via a floating drop method, Masashi Nakamotoa,Toshihiro Tanaka,Takaiku Yamamoto, Colloids and Surfaces A, Vol. 529, p. 985-989, 2017/07
  • High Wettability of Liquid Caesium Iodine with Solid Uranium Dioxide, Ken Kurosaki,Masanori Suzuki,Masayoshi Uno,Hiroto Ishii,Masaya Kumagai,Keito Anada,Yukihiro Murakami,Yuji Ohishi,Hiroaki Muta,Toshihiro Tanaka,Shinsuke Yamanaka, Scientific Reports, NATURE PUBLISHING GROUP, Vol. 7, 2017/07
  • Evaluation of PbO Activity in B2O3-based Molten Slag by EMF Method, Masanori Suzuki,Naoya Tamura,Hiroki Shirakawa,Toshihiro Tanaka, Proc. of The 6th Asian Conference on Molten Salts Chemistry and Technology,, 2017/06
  • Evaluation of PbO Activity in B2O3-based Molten Slag by EMF Method, Masanori Suzuki,Naoya Tamura,Hiroki Shirakawa,Toshihiro Tanaka, Proc. the 6th Asian Conference on Molten Salts Chemistry and Technology, 2017/06
  • Interfacial Properties Related to Iron & Steelmaking, Masashi Nakamoto,Toshihiro Tanaka, Proceedings of the 2nd ISIJ-VDEh-Jernkontoret Joint Symposium, Jernkontoret, p. 261-266, 2017/06
  • シラン系樹脂に含有させた金属ナノパウダーの分散状態によるバイオフィルム付着性評価, 佐野勝彦,佐野勝彦,兼松秀行,平井信充,小川亜希子,幸後健,田中敏宏, 材料とプロセス(CD-ROM), Vol. 30, No. 1, 2017/03/31
  • Estimation of Thermodynamic Parameters in Liquid Iron, Masashi Nakamoto,Toshihiro Tanaka, Proceedings of 1st International Conference on Energy and Material Efficiency and CO2 Reduction in the Steel Industry (EMECR 2017), 2017/01
  • Interfacial Properties Related to Iron & Steelmaking, Masashi Nakamoto,Toshihiro Tanaka, Proceedings of the 2nd ISIJ-VDEh-Jernkontoret Joint Symposium, Jernkontoret, Stockholm (2017), ., 2017/01
  • Nanocomposite polymer film for anti biofouling materials surfaces, Hideyuki Kanematsu,Katsuhiko Sano,Hajime Ikegami,Dana M. Barry,Michiko Yoshitake,Yoshimitsu Mizune,Toshihiro Tanaka, In Fundamentals of nanoparticles - Classifications, Synthesis Methodds, Properties and Characterization, Barhoum, A. and A. S. H. Makhlouf Eds.; Elsevier: Amsterdam, Netherlands, p. 105-128, 2017/01
  • Biofouling on mortar mixed with steel slags in a laboratory biofilm reactor, Katsuhiko Sano,Tomoka Masuda,Seiji Yokoyama,Nobumitsu Hirai,Akiko Ogawa,Takeshi Kougo,Kenji Yamazaki,Toshihiro Tanaka, American Institute of Physics Publishing (AIP Publishing), Vol. 1807, p. 020004-1-020004-5, 2017/01
  • Short-term Exchange Programs for Engineering Research Education, MIYAHARA Keizo,TANAKA Toshihiro, Proceedings of the 5th IEEE International Conference on Teaching, Assessment, and Learning for Engineering (IEEE TALE2016), 2016/12
  • Fabricating porous glass using hydrothermal reaction for application to toxic ion removal from polluted water, Chen Yee Goh,Masanori Suzuki,Toshihiro Tanaka,Norihiro Murayama, Proceedings of MJIIT-JUC Joint International Symposium 2016, Kuala Lumpur, Malaysia, presented on Sep. 6-7, 2016., 2016/09
  • Studies on Interfacial Phenomena in Titanium Carbide/Liquid Steel Systems for Development of Functionally Graded Material, Miia Kiviö,Lauri Holappa,Seppo Louhenkilpi,Masashi Nakamoto,Toshihiro Tanaka, Metallurgical and Materials Transactions B, 2016/08
  • Effect of silver or copper nanoparticles-dispersed silane coatings on biofilm formation in cooling water systems, Akiko Ogawa,Hideyuki Kanematsu,Katsuhiko Sano,Yoshiyuki Sakai,Kunimitsu Ishida,Iwona B. Beech,Osamu Suzuki,Toshihiro Tanaka, Materials, MDPI AG, Vol. 9, No. 8, p. 632-651, 2016/07/29
  • Synthesis of Bi0.5Sb1.5Te3 sintered composite with dispersed ionic liquid and investigation of their thermoelectric properties, Shigeru Katsuyama,Yusuke Kusafuka,Toshihiro Tanaka, Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 63, No. 8, p. 719-724, 2016/07/01
  • Joining of Copper Plates by Unusual Wetting with Liquid Tin and Tin-Lead Solder on "Surface Fine Crevice Structure", M. Nakamoto,A. Fukuda,J. Pinkham,S. Vilakazi,H. Goto,R. Matsumoto,H. Utsunomiya,T. Tanaka, 日本金属学会, Vol. 57, No. 6, p. 973-977, 2016/06
  • Dynamic Changes in Interfacial Tension between Liquid Fe Alloy and Molten Slag Induced by Chemical Reactions, Tanaka Toshihiro,Goto Hiroki,Nakamoto Masashi,Suzuki Masanori,Hanao Masahito,Zeze Masafumi,Yamamura Hideaki,Yoshikawa Takeshi, ISIJ INTERNATIONAL, Vol. 56, No. 6, p. 944-952, 2016/06
  • Preparation and Its Anti-Biofouling Effect Observation of Organic Metal Dispersed Silane Based Composite Coating, Katuhiko Sano,Hideyuki Kanematsu,Nobumitsu Hirai,Toshihiro Tanaka, Hyoumen Gijutsu (Journal of Surface Finishing Society of Japan), Vol. 67, No. 5, p. 268-273, 2016/05
  • Beverage Engineers: Creative International STEM project, Dana M. Barry,Shigeru Katuyama,Toshihiro Tanaka,Hideyuki Kanematsu, International Journal of Humanities and Social Sciences, Vol. 8, No. 4, p. 18-28, 2016/04
  • レーザ加工により表面微細構造を作製した鉄基板と液体Bi,InおよびSnの濡れ性, 福田 敦,佐竹義旦,後藤弘樹,鈴木賢紀,中本将嗣,松本 良,宇都宮 裕,田中敏宏, スマートプロセス学会誌, Vol. 5, No. 2, p. 153-158, 2016/03
  • 分光学的手法を用いた,種々の金属ナノパウダー分散シラン系樹脂コンポジットコーティング上のバイオフィルム評価, 佐野勝彦,兼松秀行,平井信充,小川亜希子,幸後健,田中敏宏, 材料とプロセス(CD-ROM), Vol. 29, No. 1, 2016/03/01
  • Corrosion and biofilm for a composite coated iron observed by FTIR-ATR and Raman spectroscopy, Katsuhiko Sano,Hideyuki Kanematsu,Takeshi Kogo,Nobumitsu Hirai,Toshihiro Tanaka, Transactions of Institute of Materials Finishing, Vol. 94, No. 3, p. 139-145, 2016/03
  • Development of custom lighting device by additive manufacturing technology with metal powder, Masatoshi Teranishi,Kazuto Nishida,Takayoshi Nakano,Hideki Araki,Toshihiro Tanaka, Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 63, No. 2, p. 82-84, 2016/02/01
  • 高温材料プロセスにおける熱移動の基礎とケーススタデイー:Metallurgical Heat Transfer, 竹内栄一,田中敏宏, 大阪大学出版会、(2016)., 2016/01
  • 積層造形技術による金属製カスタム照明の開発とデライト価値の創出, 寺西正俊,西田一人,中野貴由,田中敏宏,掛下知行, まてりあ, 2016/01
  • Introduction to "FrontierLab@OsakaU SummerProgram", Keizo MIYAHARA,Toshihiro TANAKA, Manufacturing & Technology, Vol. 68, No. 1, p. 88-91, 2016/01
  • Formation and Local Structure Analysis of High-Valence Chromium Ion in Dicalcium Silicate, Masanori Suzuki,Norimasa Umesaki,Toshihiro Okajima,Toshihiro Tanaka, Journal of the American Ceramic Society, Blackwell Publishing Inc., Vol. 99, No. 9, p. 3151-3158, 2016
  • Evaluating Composition Dependence in Surface Tension of Si-Ca-Na-O-F Reciprocal Oxide-fluoride Melts, Suzuki Masanori,Tanaka Shota,Hanao Masahito,Tanaka Toshihiro, ISIJ INTERNATIONAL, Vol. 56, No. 1, p. 73-80, 2016/01
  • Phosphate, phosphide, nitride and carbide capacity predictions of molten melts by using an artificial neural network approach, Bora Derin,Emre Alan,Masanori Suzuki,Toshihiro Tanaka, ISIJ International, Iron and Steel Institute of Japan, Vol. 56, No. 2, p. 183-188, 2016
  • Overview of silane-based polymer coatings and their applications, Katsuhiko Sano,Hideyuki Kanematsu,Toshihiro Tanaka, Industrial Applications for Intelligent Polymers and Coatings, Springer International Publishing, p. 493-509, 2016/01/01
  • Effect of Water Granulation Conditions on Density and Grain Size of Granulated Blast Furnace Slag, Hiroyuki Tobo,Keiji Watanabe,Michihiro Kuwayama,Shigeaki Goto,Hiroki Goto,Toshihiro Tanaka, ISIJ International, 2015/11
  • Metal-Metal Joining by Unusual Wetting on Surface fine Crevice Structure Formed by Laser Treatment, A. Fukuda,H. Matsukawa,H. Goto,M. Suzuki,M. Nakamoto,R. Matsumoto,H. Utsunomiya,T. Tanaka, MATERIALS TRANSACTIONS, 日本金属学会, Vol. 56, No. 11, p. 1852-1856, 2015/11
  • 三次元異方性カスタマイズ化設計・付加製造拠点の構築と地域実証プロジェクトの背景と趣旨, 掛下知行,田中敏宏,中野貴由, まてりあ, 2015/10
  • Capillary Metallurgy and its application to the steelmaking Process, Toshihiro Tanaka,Masashi Nakamoto,Masahito Watanabe,Masanori Suzuki, Proc. Asia Steel International Conference 2015, 2015/10
  • Osaka University Anisotropic Design & AM Research Center, Tanaka Toshihiro,Nakano Takayoshi,Nakamoto Masashi,Ide Takuya, Materia Japan, The Japan Institute of Metals and Materials, Vol. 54, No. 10, p. 498-499, 2015/10
  • Anti-biofouling silane based composite coating and its structural-analysis, Katsuhiko Sano,Hideyuki Kanematsu,Nobumitsu Hirai,Hajime Ikegai,Akiko Ogawa,Takeshi Kogo,Toshihiro Tanaka, Asia Steel International Conference 2015, Proceeding, Yokohama, Japan, October 5-8, 2015, p. 154-155, 2015/10
  • Attractive Engineering Research Program for International Exchange Students, MIYAHARA, Keizo,TANAKA, Toshihiro, The Proceeding of the 18th International Conference on Interactive Collaborative Learning (ICL2015), 2015/09
  • On Basic Phenomena at Liquid Steel/ TiC Particle Interface for Development of Functionally Graded Materials, Miia Kivio,Lauri Holappa,Seppo Louhenkilp,Masashi Nakamoto,Toshihiro Tanaka, Proc. Of CTSSC EMI symposium,, 2015/09
  • Comparative Discussion for Biofilm Formation on Polymer Films and Application to Steel Coating, Takeshi Kogo,Yusuke Nakako,Katsuhiko Sano,Hideyuki Kanematsu,Akiko Ogawa,Kenji Yamasaki,Hajime Ikegai,Toshihiro Tanaka, CAMP-ISIJ, Vol. 28, No. 2, p. 501-502, 2015/09
  • Inhibition effect of plasma oxidation process on biofilm formation, Chase Kato,Nobumitsu Hirai,Katsuhiko Sano,Hideyuki Kanematsu,Akiko Ogawa,Takeshi Logo,Hajime Ikegai,Hideyuki Kanematsu, CAMP-ISIJ, Vol. 28, No. 2, p. 497-498, 2015/09
  • The effect of inner surface of cooling water pipe on biofilm formation, Akiko Ogawa,Hideyuki Kanematsu,Katsuhiko Sano,Yoshiyuki Sakai,Osamu Suzuki,Kunimitsu Ishida,Toshihiro Tanaka, CAMP-ISIJ, Vol. 28, No. 2, p. 495-496, 2015/09
  • Analyses of Biofilm Formed on Various Metal Substrates by FT-IR and Raman Spectroscopy, Katsuhiko Sano,Hideyuki Kanematsu,Nobumitsu Hirai,Akiko Ogawa,Takeshi Kogo,Koki Kitayabu,Toshihiro Tanaka, CAMP-ISIJ, Vol. 28, No. 2, p. 493-494, 2015/09
  • Development of Viscometer Based on Single Sphere Pulling Method for Application to High Temperature Melts, Suzuki Masanori,Hiramae Daiki,Tanaka Toshihiro, ISIJ INTERNATIONAL, Vol. 8, No. 55, p. 1573-1580, 2015/08
  • 溶鉄-固体アルミナ間の界面物性を利用した窒化アルミニウム結晶成長, 後藤弘樹,鈴木賢紀,田中敏宏, 日本金属学会誌, 2015/07
  • Formation of Surface Micro Crevice Structure on Metals and its Application to Joining Metals, Toshihiro Tanaka,Hiroki Goto,Masashi Nakamoto,Masanori Suzuki, Proc. of the 13th Korea/ Japan International Symposium on Resources Recycling and Materials Science,, 2015/05
  • Significant improvement of light absorbance of molybdenum plate by surface asperity formation using oxidation-reduction treatment and application to high temperature radiation heat energy use, Masanori Suzuki,Toshifumi Yamamoto,Naoya Tamura,Shigeru Katsuyama,Toshihiro Tanaka, Journal of Renewable and Sustainable Energy, American Institute of Physics Inc., Vol. 7, No. 3, 2015/05/01
  • 三次元異方性カスタマイズ化設計・付加製造拠点の構築と地域実証, 掛下知行,田中敏宏,中野貴由, 生産と技術, 2015/04
  • Some anti-fouling silane compound composite films on iron and their corrosion characteristics revealed by Raman spectroscopy and FTIR-ATR spectroscopy, Sano, Katsuhiko,Kanematsu, Hideyuki,Hirai, Nobumitsu,Ogawa, Akiko,Kougo, Takeshi,Tanaka, Toshihiro, CAMP-ISIJ, Vol. 28, p. 371-371, 2015/03
  • 海外交流~さくらサイエンス参加者との暑い10日間, 寺井智之,野尻郁子,田中玲子,藤田清士,田中敏宏, 生産と技術,, 2015/02
  • Formation of nanoglobules with core-shell structure by liquid phase separation in Fe-Cu-Zr-B immiscible alloy, Takeshi Nagase,Masanori Suzuki,Toshihiro Tanaka, Journal of Alloys and Compounds, Elsevier Ltd, Vol. 619, p. 332-337, 2015/01/15
  • Development of continuous steelmaking slag solidification process suitable for sensible heat recovery, Hiroyuki Tobo,Yasutaka Ta,Michihiro Kuwayama,Yuki Hagio,Kazuya Yabuta,Hirokazu Tozawa,Toshihiro Tanaka,Kazuki Morita,Hiroyuki Matsuura,Fumitaka Tsukihashi, ISIJ International, Iron and Steel Institute of Japan, Vol. 55, No. 4, p. 894-903, 2015
  • Preface to Special Issue on &ldquo;Establishment and Validation of the Base for 3D Design & Additive Manufacturing Standing on the Concept &ldquo;Anisotropy&rdquo; & &ldquo;Customization&rdquo; &rdquo;, Kakeshita Tomoyuki,Tanaka Toshihiro,Nakano Takayoshi,Araki Hideki,Furutera Masaharu,Yamaguchi Katsumi,Nishida Kazuto,Teranishi Masatoshi, Materia Japan, The Japan Institute of Metals and Materials, Vol. 54, No. 10, p. 491-492, 2015
  • 高温材料プロセスにおける物質移動の基礎とケーススタデイー, 竹内栄一,田中敏宏, Metallurgical Mass Transfer, 2015/01
  • ISS静電浮遊炉を用いた高温融体界面現象の研究‐酸化物・鉄鋼融体の界面張力測定‐, 渡邉匡人,田中敏宏,塚田隆夫,石川毅彦,田丸晴香,水野章敏, Int. J. Microgravity Sci. Appl., 2015/01
  • Capillary Metallurgyの構築を目指して, 田中敏宏, 生産と技術,, 2015/01
  • 2 重液滴試料作製のための溶鉄-溶融スラグ・フラックス被覆性評価, 中本将嗣,後藤弘樹,鈴木賢紀,田中敏宏, Int. J. Microgravity Sci. Appl., 2015/01
  • Composite coating to control biofilm formation and effect of alternate electro-magnetic field, H. Kanematsu,S. Sasaki,Y. Miura,T. Kogo,K. Sano,N. Wada,M. Yoshitake,T. Tanaka, Materials Technology,, 2015/01
  • Evaluation of Engulfment of Molten Iron by Molten Slag/Flux for Preparation of their Core-shell Droplet, Nakamoto Masashi,Goto Hiroki,Suzuki Masanori,Tanaka Toshihiro, INTERNATIONAL JOURNAL OF MICROGRAVITY SCIENCE AND APPLICATION, Vol. 32, No. 1, 2015
  • Microstructure of rapidly solidified Fe-M-Si-B (M=Cu, Ag, Sn) immiscible alloys, T. Nagase,M. Suzuki,T. Tanaka, J. of the Society of Materials Science, 2015/01
  • Amorphous phase formation in Fe-Ag based immiscible alloys, T. Nagase,M. Suzuki,T. Tanaka, 2015/01
  • Formation of amorphous phase with crystalline globules in Fe-Cu-Nb-B immiscible alloys, T. Nagase,M. Suzuki,T. Tanaka, Journal of alloys and compounds, 2015/01
  • On-Campus "Hands-on" Research Opportunities for International Exchange Undergraduate Students, MIYAHARA Keizo,TANAKA Toshihiro, 2014/12
  • Trial of Metal-Metal Joining by Unusual Wetting on Laser-Treated Surface Fine Crevasse Structure, M. Nakamoto,A. Fukuda,H. Goto,R. Matsumoto,M. Suzuki,H. Utsunomiya,T. Tanaka, Proceedings of the MJIIT-JUC (Malaysia Japan International Institute Technology - Japanese University Consortium) Joint International Symposium 2014, 2014/11
  • Fabrication of Iron Particles from Porous CaO and Molten Iron Sulfide using Spontaneous Wettability Conversion, M. Nakamoto,T. Tanaka,T. Yamamoto, Journal of the Japanese Society for Experimental Mechanics, 2014/09
  • Silane Coating for Biofouling Control and Its Evaluation, Sano, Katsuhiko,Kanematsu, Hideyuki,Hirai, Nobumitsu,Ogawa, akiko,Kougo, Takeshi,Tanaka, Toshihiro, CAMP-ISIJ, Vol. 27, p. 597-598, 2014/09
  • 溶融Fe–C–Cu合金の一方向凝固によるCuの凝固偏析, 中本将嗣,奥村泰光,田中敏宏,山本高郁, 鉄と鋼, 2014/06
  • 高炉水砕スラグの粒度および密度に及ぼす製造条件の影響, 當房博幸,渡辺圭児,桑山道弘,後藤滋明,後藤弘樹,田中敏宏, 鉄と鋼, 2014/06
  • Effects of Interfacial Properties between Molten Iron and Alumina on Neck Growth of Alumina Balls at Sintering in Molten Iron, Nakamoto Masashi,Tanaka Toshihiro,Suzuki Masanori,Taguchi Kenji,Tsukaguchi Yuichi,Yamamoto Takaiku, ISIJ INTERNATIONAL, Vol. 54, No. 6, p. 1195-1203, 2014/06
  • Biofilm Formation Process on Steel Surface Revealed by AFM, Hirai, Nobumitsu,Kanematsu, Hideyuki,Kanata,Takafumi,Ozawa, Hikari,Itoh, Hideo,Masuda, Tomoka,Tanaka, Toshihiro, 17th International Congress on Marine Corrosion and Fouling (ICMCF). 2014. Stephen Riady Centre, National University of Singapore, Singapore:, p. 43-43, 2014/06
  • エポックを作った人物 的場幸雄先生と鉄冶金熱力学, 田中敏宏, 鉄と鋼、, 2014/04
  • CAREN:アジア人材育成のための領域横断国際研究教育拠点形成事業”のご紹介, 田中敏宏, 生産と技術,, 2014/03
  • Surface Reaction of Blast Furnace Slag under the Hydrothermal Condition, Masashi Hosokawa,Takeshi Yoshikawa,Toshihiro Tanaka,Nakamichi Yamasaki, ISIJ International, 2014/03
  • 複眼的視野を涵養する大阪大学の副専攻教育, 中西 浩,田中 敏宏, 工学教育, 2014/02
  • Solidification Conditions to Reduce Porosity of Air-cooled Blast Furnace Slag for Coarse Aggregate, Hiroyuki Tobo,Yoko Miyamoto,Keiji Watanabe,Michihiro Kuwayama,Tatsuya Ozawa,Toshihiro Tanaka, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 54, No. 3, p. 704-713, 2014
  • Segregation of Cu by Unidirectional Solidification in Molten Fe-C-Cu Alloy, Masashi Nakamoto,Yasumitsu Okumura,Toshihiro Tanaka,Takaiku Yamamoto, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 100, No. 6, p. 761-768, 2014
  • Trial for Thermodynamic Calculation of Nano-particle Binary Alloy Phase Diagrams, Toshihiro Tanaka, Proc. of the 26th Symp. on Phase Change Oriented Science, PCOS 2014,, 2014/01
  • Use of hydrothermal reactions for slag/glass recycling to fabricate porous materials, Masanori Suzuki,Toshihiro Tanaka,Nakamichi Yamasaki, Current Opinion in Chemical Engineering, Vol. 3, No. 1, p. 7-12, 2014
  • 顕熱回収に適した製鋼スラグ連続凝固プロセスの開発, 當房博幸,田 恵太,桑山道弘,萩尾勇樹,薮田和哉,戸澤宏一,田中敏宏,森田一樹,松浦宏行,月橋文孝, 鉄と鋼, 2013/12
  • Stability of Interface Between Liquid Steel and Molten Slag, Piotr R. Scheller,Joonho Lee,Toshihiro Tanaka, Treatise on Process Metallurgy, Elsevier Ltd., Vol. 2, p. 111-118, 2013/11
  • Applications of Interfacial Phenomena in Process Metallurgy, Piotr R. Scheller,Joonho Lee,Takeshi Yoshikwa,Toshihiro Tanaka, Treatise on Process Metallurgy, Elsevier Ltd., Vol. 2, p. 119-139, 2013/11
  • Experiments, Toshihiro Tanaka,Joonho Lee, Treatise on Process Metallurgy, Elsevier Ltd., Vol. 2, p. 19-34, 2013/11
  • Interfacial Free Energy and Wettability, Toshihiro Tanaka,Joonho Lee,Piotr R. Scheller, Treatise on Process Metallurgy, Elsevier Ltd., Vol. 2, p. 61-77, 2013/11
  • Surfaces and Interfaces, Joonho Lee,Toshihiro Tanaka, Treatise on Process Metallurgy, Elsevier Ltd., Vol. 2, p. 2-10, 2013/11
  • Osaka University Students Use English to Carry out a Creative Engineering Project about Tsunamis, Dana M. Barry,Toshihiro Tanaka,Hideyuki Kanematsu, International Journal of Engineering Research & Technology (IJERT),, 2013/11
  • 粗骨材用高炉徐冷スラグの気孔率低減のための凝固条件, 當房博幸,宮本陽子,渡辺圭児,桑山道弘,小澤達也,田中敏宏, 鉄と鋼, 2013/08
  • Surface tension of a liquid-oxygen system using a multilayer free energy model, Risto Pajarre,Pertti Koukarri,Toshihiro Tanaka, International Journal of Materials Research, 2013/08
  • Neodymium Distribution between Cu-rich and Fe-rich Phases in Two Immiscible Liquids in Fe–Cu–C System, M. Nakamoto,Y. Tanaka,S. Tagaki,T. Tanaka,T. Yamamoto, ISIJ International, 2013/04
  • Thermoelectric properties of sintered CoSb3 with bimodal distribution of crystal grain size - Possibility of enhancement of thermoelectric performance by percolation phenomenon, Shigeru Katsuyama,Toshihiro Tanaka, Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 60, No. 2, p. 66-72, 2013/02
  • Development of continuous steelmaking slag solidification process suitable for sensible heat recovery, Hiroyuki Tobo,Yasutaka Ta,Michihiro Kuwayama,Yuki Hagio,Kazuya Yabuta,Hirokazu Tozawa,Toshihiro Tanaka,Kazuki Morita,Hiroyuki Matsuura,Fumitaka Tsukihashi, Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, Vol. 99, No. 12, p. 683-692, 2013
  • Solidification conditions to reduce porosity of air-cooled blast furnace slag for coarse aggregate, Hiroyuki Tobo,Yoko Miyamoto,Keiji Watanabe,Michihiro Kuwayama,Tatsuya Ozawa,Toshihiro Tanaka, Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, Vol. 99, No. 8, p. 532-541, 2013
  • Fabricating porous glass with needle-shaped hydrate crystals by hydrothermal treatment of blast-furnace slag and borosilicate glass mixture, Masanori Suzuki,Toshifumi Yamamoto,Soichiro Kuwata,Bora Derin,Nakamichi Yamasaki,Toshihiro Tanaka, Materials Transactions, Vol. 54, No. 9, p. 1741-1749, 2013
  • Composition dependence of viscosity in binary silicate melts using double exponential function, Masashi Nakamoto,Toshihiro Tanaka,Lauri Holappa,Takaiku Yamamoto, ISIJ International, 2012/10
  • Fundamental investigation on the formation of biofilm by means of in-situ AFM, Nobumitsu Hirai,Takafumi Kaneta,Masanori Suzuki,Shigeru Katsuyama,Toshihiro Tanaka,Hideyuki Kanematsu, CAMP-ISIJ, Vol. 25, p. 759-760, 2012/09
  • Extraction of Rare Earth Elements as Oxides from a Neodymium Magnetic Sludge, Masashi Nakamoto,Kenji Kubo,Yohei Katayama,Toshihiro Tanaka,Takaiku Yamamoto, Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 2012/06
  • Effects of Porous Surface Layer on Lubrication Evaluated by Ring Compression Friction Test, Yukiya Oyachi,Hiroshi Utsunomiya,Tetsuo Sakai,Takeshi Yoshikaw,Toshihiro Tanaka, ISIJ International, The Iron and Steel Institute of Japan, 2012/05
  • Erratum to "Effects of Porous Surface Layer on Lubrication Evaluated by Ring Compression Friction Test"<br>[ISIJ Int. 52(5): 858–862 (2012)], Oyachi Yukiya,Utsunomiya Hiroshi,Sakai Tetsuo,Yoshikawa Takeshi,Tanaka Toshihiro, Transactions of the Iron and Steel Institute of Japan, The Iron and Steel Institute of Japan, Vol. 52, No. 6, p. 1171-1171, 2012
  • Fabrication of Porous Glass Supporting Silver Ultrafine Particles after Hydrothermal Treatment and Microwave Heating, Takeshi Yoshikawa,Kei Kasamatsu,Takafumi Kanata,Nobumitsu Hirai,Toshihiro Tanaka,Kohsuke Mori, JOURNAL OF THE JAPAN INSTITUTE OF METALS, JAPAN INST METALS, Vol. 75, No. 12, p. 665-670, 2011/12
  • 水熱反応-マイクロ波加熱プロセスを用いた銀微粒子担持多孔質ガラスの作製, 吉川健,笠松敬,金田貴文,平井信充,田中敏宏,森浩亮, 日本金属学会誌, Vol. 75, No. 12, p. 665-670, 2011/12
  • 水熱反応を利用したバイオマスからの微細孔炭素材料作製の試み, 塚本千尋,細木佳奈,辻愛,平井信充,山崎仲道,田中敏宏, 材料とプロセス(CD-ROM), Vol. 24, No. 2, 2011/09/01
  • Wetting Behaviors of Steels Containing Al and Al -S on Solid CaO, Takeshi Yoshikawa,Kazuya Motosugi,Toshihiro Tanaka,Mitsuru Ueda, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 97, No. 7, p. 361-368, 2011/07
  • 固体CaOの上A1含有鋼ならびにA1-S含有鋼の濡れ挙動, 吉川健,本杉和也,田中敏宏,上田満, 2011/07
  • Surface Properties of Molten Slag for Green Metallurgy, Toshihiro Tanaka,Masanori Suzuki, 2011/06
  • Trial of capillary refining by porous CaO with molten slag, Toshihiro Tanaka,Masanori Suzuki, 2011/04
  • ソフト水熱反応によるバイオマスからの微細孔炭素材料の作成, 細木佳奈,辻愛,平井信充,山崎仲道,田中敏宏, 材料とプロセス(CD-ROM), Vol. 24, No. 1, 2011/03/01
  • 低環境負荷微細孔材料作製の試み, 田中敏宏,鈴木賢紀,平井信充, シーエムシー出版, 2011/01
  • 表面張力・界面張力・接触角, 高温物性の手作り実験室, アグネ技術センター, 2011/01
  • Nano-Porous Layer on Steel Surface as Lubricant Carrier, Hiroshi Utsunomiya,Shogo Kawajiri,Nobuyuki Takahira,Tetsuo Sakai,Toshihiro Tanaka, Journal of Nanoscience and Nanotechnology, 2011/01
  • Fundamental study on the effect of EPS in biofilms on microbial influential corrosion., Nobumitsu Hirai,Toshihiro Tanaka,Hideyuki Kanematsu,Chiyo Yamamoto, Materials Science and Technology (MS&T) 2010, Houston, Texas, USA, p. 461-469, 2010/10
  • Fundamental investigation on the effect of EPS in biofilms on microbial influential corrosion of steel, Nobumitsu Hirai,Takafumi Kanata,Toshihiro Tanaka,Chiyo Yamamoto,Shinya Katsumura,Hideyuki Kanematsu, CAMP-ISIJ, Vol. 23, p. 674-675, 2010/09
  • Solution Growth of Silicon Carbide Using Fe-Si Solvent, Takeshi Yoshikawa,Sakiko Kawanishi,Toshihiro Tanaka, Jpn. Journal of Appliede Physics, 2010/05
  • Thermodynamics of impurity elements in solid silicon, Takeshi Yoshikawa,Kazuki Morita,Sakiko Kawanishi,Toshihiro Tanaka, JOURNAL OF ALLOYS AND COMPOUNDS, ELSEVIER SCIENCE SA, Vol. 490, No. 1-2, p. 31-41, 2010/02
  • Carbonization of Bamboo and Japanese cedar under soft hydrothermal conditions, Kana Hosogi,Toshifumi Yamamoto,Hiroshi Inamaru,Yuki Mori,Zhixia Li,Nakamichi Yamasaki,Toshihiro Tanaka, AIP Conference Proceedings, Vol. 1251, p. 292-295, 2010
  • Development of Swirling-flow Submerged Entry Nozzles for Slab Casting, Yuichi Tsukaguchi,Hiroshi Hayashi,Hidenori Kurimoto,Shinichiro Yokoya,Katsukiyo Marukawa,Toshihiro Tanaka, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 50, No. 5, p. 721-729, 2010
  • Sustainable Valuable Metals and Steels by Two Immiscible Liquid Phases, Masashi Nakamoto,Shingo Tagaki,Takaiku Yamamoto,Toshihiro Tanaka, 2010/01
  • 高温融体の表面張力, 田中敏宏, ふぇらむ, 2010/01
  • Distribution and coordination state of titanium oxides in microstructures formed by spinodal decomposition in multicomponent borosilicate glass, Masanori Suzuki,Toshihiro Tanaka, ISIJ International, Vol. 50, No. 4, p. 509-514, 2010
  • Evaluation of Dynamic wettability of liquid Zn with steel sheets containing Si and Mn, T. Tanaka, Proc. of The Asia-Pacific Galvanizing Conference 2009, Jeju, Korea,, 2009/11
  • Effects of interaction parameters and melting points of pure metals on the phase diagrams of the binary alloy nanoparticle systems: A classical approach based on the regular solution model, Joonho Lee,Joongchul Park,Toshihiro Tanaka, CALPHAD, 2009/06
  • 水熱反応を利用したスラグの利材化の試み, 田中敏宏,吉川健,平井信充, Bulletin of the Iron and Steel Institute of Japan, Vol. 14, No. 6, p. 353-359, 2009/06
  • Effective Usage of Solid CaO to Refining in Steelmaking, Toshihiro Tanaka,Masashi Ohmachi,Mitsuru Ueda, Proceedings of Asia Steel 2009, 2009/05
  • Materials Design for Producing Functional Porous Glass using Phase Seperation in Multi-component Oxide Glass from Waste Slag, Masanori Suzuki,Toshihiro Tanaka, Proceedings of Asia Steel 2009, Busan, Korea, 2009/05
  • Estimation of Environmental Credit for Recycling Blast Furnace Slag with a Hydrothermal Reaction on LCA, Soon-Jae Tae,Tsuyoshi Adachi,Toshihiro Tanaka,Kazuki Morita, 2009/05
  • Equilibrium Phase Relationship between SiC and a Liquid Phase in the Fe-Si-C System at 1523 - 1723 K, S. Kawanishi,T. Yoshikawa,T. Tanaka, Materials Transaction, 2009/04
  • Trial on the Application of Capillary Phenomenon of Solid CaO to Desulfurization of Liquid Fe, Toshihiro Tanaka,Yumi Ogiso,Mituru Ueda,Joonho Lee, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 95, No. 3, p. A275-A281, 2009/03
  • Estimation of Sulfur Segregation at the Interface Between Molten Iron and Graphite Substrate from Wetting Experiments, J. Lee,A. Tazuke,T. Tanak,J.-H. Park, Met. Mater. Int.,, 2009/03
  • 固体CaOの毛細管現象を利用した溶鉄の脱硫反応の試み, 田中敏宏,小木曾由美,上田満,李俊昊, 鉄と鋼, 2009/03
  • A Model for Estimating Viscosity of Molten Aluminosilicate Containing Calcium fluoride, Y. Miyabayashi,M Nakamoto,T. Tanaka,T. Yamamoto, ISIJ International, Vol. 49, No. 3, p. 343-348, 2009/03
  • Development of Swirling Flow Submerged Entry Nozzles for Slab Casting, Yuichi Tsukaguchi,Hiroshi Hayashi,Hidenori Kurimoto,Shinichiro Yokoya,Katsukiyo Marukawa,Toshihiro Tanaka, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 95, No. 1, p. 33A-42A, 2009/01
  • Estimation of Physical Properties of Molten Mould Flux by Neural Network Computation, Masahito Hanao,Masayuki Kawamoto,Masashi Nakamoto,Toshihiro Tanaka, 2009/01
  • Proc. of the VIII International COnf. On Molten Slag, Fluxed and Salts, M. Hamano,M. Kawamoto,M. Nakamoto,T. Tanaka, 2009/01
  • In situ atomic-scale observation of melting point suppression in nanometer-sized gold particles, Junggoo Lee,Joonho Lee,Toshihiro Tanaka,Hirotaro Mori, Nanotechnolog., 2009/01
  • Effect of microwave irradiation on hydrothermal treatment of blast furnace slag, Soon-Jae Tae,Toshihiro Tanaka,Kazuki Morita, ISIJ International, Vol. 49, No. 8, p. 1259-1264, 2009
  • A fundamental approach for the measurement of solid-liquid interfacial energy, A. Fukuda,T. Yoshikawa,T. Tanaka, Vol. 165, No. 1, p. 12079-12079, 2009/01
  • Fundamental study for solvent growth of silicon carbide utilizing Fe-Si melt, T. Yoshikawa,S. Kawanishi,T. Tanaka, Vol. 165, No. 1, p. 12022-12022, 2009/01
  • スラブ連続鋳造用旋回流浸漬ノズルの開発, 塚口友一,林浩史,栗本英典,横谷真一郎,丸川雄浄,田中敏宏, Vol. 95, No. 1, p. 33-42, 2009/01
  • Estimation of Physical Properties of Molten Slag by Neural Network Computation, M. Hanao,M. Kawamoto,M. Nakamoto,T. Tanaka, Proc. of the VIII International Conf. On Molten Slag, Fluxes and Salts, 2009/01
  • Design of Porous Glass & Slag Materials and its Application to Refining, T. Tanaka,T. Yoshikawa,M. Suzuki, Proc. of the VIII International Conf. On Molten Slag, Fluxes and Salts, 2009/01
  • The effect of Si and Mn content on dynamic wetting of steel with liquid Zn, Yoshihisa Takada,Shunsuke Shimada,Joonho Lee,Masao Kurosaki,Toshihiro Tanaka, ISIJ International, Vol. 49, No. 1, p. 100-104, 2009
  • Fabrication of porous solidified materials from blast furnace slag using hydrothermal hot-pressing method and measurement of thermal conductivity of solidified materials, Nobumitsu Hirai,Soichiro Maeda,Shigeru Katsuyama,Toshihiro Tanaka, Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, Vol. 95, No. 1, p. 1-6, 2009
  • In-situ EC-AFM observations upon decay of nano-islands on Au(100) electrodes in 1-butyl-3-methyl-imidazolium room temperature molten salts; BMImBF4 and BMImTFSI, Nobumitsu Hirai,Tomohiko Yokogawa,Toshihiro Tanaka, Electrochemistry, Electrochemical Society of Japan, Vol. 77, No. 8, p. 680-682, 2009
  • Evaluation of Physico-chemical Properties of Molten Salt Mixtures, T. Tanaka, Proc. 2008 Joint Symp. on Molten Salts, 2008/11
  • Application of Capillary Refining to De-P and De-S of Liquid Iron Alloy, T. Tanaka, Proc. of 13th VDEh-ISIJ joint meeting of New Scope of Iron and Steelmaking Consistent with Environment, 2008/11
  • Capillary Refining in Steelmaking Process, T. Tanaka, Proc. of SANO Symposium, 2008/10
  • Surface Pore Formation of Low-Carbon Steel for Cold Forging, Hiroshi Utsunomiya,Shogo Kawajiri,Nobuyuki Takahira,Tetsuo Sakai,Toshihiro Tanaka, Porous Metals and Metallic Forms, DEStech Publication Inc., 2008/09
  • Hydrothermal Slag/Glass Chemistry, T.Tanaka,T.Yoshikawa,N.Hirai, Proceedings of the 47th conference of metallurgists, Canadian Institute of Mining, Metallurgy and Petroleum, Montreal, Quebec, Canada,, 2008/08
  • Preparation of Low-temperature Foaming Glass by the hydrothermal Treatment of SiO2-Na2O-B2O3 glass, T. Yoshikawa,S. Sato,T. Tanaka, Proceedings of the 47th conference of metallurgists, Canadian Institute of Mining, Metallurgy and Petroleum, Montreal, Quebec, Canada,, 2008/08
  • Surface Pore Formation of Low-Carbon Steel for Cold Forging, H. Utsunomiya,S. Kawajiri,H. Takahira,T. Sakai,T. Tanaka, L.P. Lefebvre, J. Banhart and D.C. Dunand, 2008/08
  • 固体銅に対する液体Biの特異拡張濡れ現象とその接合への応用, 高平信幸,吉川健,田中敏宏, Microjoining and Assenbly in Electronics, 2008/08
  • Prediction of Phase Separation in Multi-component Oxide Glass for the Fabrication of Porous Glass Materials from Waste Slag, Masanori Suzuki,Toshihiro Tanaka, Journal of Physics, Conference Series, Vol. 165, 2008/08
  • 合金の平衡状態図, 田中敏宏, 溶接学会誌, 2008/06
  • Application of Hydrothermal Reaction to Recycling of BF Slag and Waste Glass, T. Tanaka,T. Yoshikawa, Proc. of SCANMET III, 2008/06
  • Decomposition of wustite in scale layer on iron substrate and fabrication of surface porous layer by reduction of the decomposed layer, Nobuyuki Takahira,Takeshi Yoshikawa,Toshihiro Tanaka, JOURNAL OF THE JAPAN INSTITUTE OF METALS, JAPAN INST METALS, Vol. 72, No. 3, p. 254-260, 2008/03
  • 熱物性ハンドブック,, 田中敏宏, 日本熱物性学会編、養賢堂, 2008/03
  • 鉄スケール層中wustiteの分解およびその還元による表面ポーラス層の生成, 髙平 信幸,吉川 健,田中敏宏, 日本金属学会誌, 2008/03
  • 水熱反応を利用した高炉スラグならびにガラス材からの多孔質材料の作製, 吉川健,田中敏宏, 高温学会誌, Vol. 34, No. 3, p. 117-122, 2008/03
  • 高温界面物性とその応用, 田中敏宏, ふえらむ, Vol. 51, No. 1, p. 137-141, 2008/03
  • Application of Hydrothermal Treatment on BF Slag and Waste Glass for Preparing Lubricant Materials in High Strain Rolling for Ultrafine-grained Steel Production, Shinsuke SATO,Takeshi YOSHIKAWA,Masashi NAKAMOTO,Toshihiro TANAKA,Jiro IKEDA, ISIJ International, Vol. 48, No. 2, p. 245-250, 2008/02
  • 固体銅に対する液体Biの特異拡張濡れ現象とその接合への応用, 高平信幸,吉川健,田中敏宏, 14th Symposium on "Microjoining and Assembly Technology in Electronics, 2008/02
  • Fabrication of low temperature forming glass materials using hydrothermal treatment, T. Yoshikawa,S. Sato,T. Tanaka, ISIJ International, 2008/02
  • Application of hydrothermal treatment on BF slag and waste glass for preparing lubricant materials in high strain rolling for ultrafine-grained steel production, S.Sato,T.yoshikawa,M.Nakamoto,T.Tanaka,J.Ikeda, ISIJ International, Vol. 48, No. 2, p. 245-250, 2008/02
  • 高温界面物性とその応用に関する研究, 田中敏宏, 溶融塩および高温化学, 2008/01
  • Trial to evaluate wettability of liquid Zn with steel sheets containing Si and Mn, Shunsuke Shimada,Yoshihisa Takada,Joonho Lee,Toshihiro Tanaka, ISIJ International, Vol. 48, No. 9, p. 1246-1250, 2008
  • 熱物性ハンドブック, 田中敏宏, 養賢堂, 2008/01
  • MgO effect on hydrothermal solidification of blast furnace slag, Takeshi Yoshikawa,Masaru Hosokawa,Toshihiro Tanaka, ISIJ International, Vol. 48, No. 5, p. 557-562, 2008
  • Preparation of porous ceramics by the hydrothermal reaction of blast furnace slag for use in a water-retentive material, Takeshi Yoshikawa,Shota Hirano,Nobumitsu Hirai,Toshihiro Tanaka, ISIJ International, Vol. 48, No. 9, p. 1322-1324, 2008
  • Materials design for the fabrication of porous glass using phase separation in multi-component borosilicate glass, Masanori Suzuki,Toshihiro Tanaka, ISIJ International, Vol. 48, No. 11, p. 1524-1532, 2008
  • Composition dependence of microstructures formed by phase separation in multi-component silicate glass, Masanori Suzuki,Toshihiro Tanaka, ISIJ International, Vol. 48, No. 4, p. 405-411, 2008
  • Hydrothermal Slag Chemistry, T. Tanaka,N. Hirai,T. Yoshikawa,M. Nakamoto,S. Maeda,M. Hosokawa, Proc. 1st Intern. Symp. on Aqua Science, 2007/12
  • Effects of the anisotropy of the anti-phase boundary energy on the yield-stress anomaly in Ni3X compounds with close-packed crystal structures, K. Hagihara,T. Tanaka,T. Nakano,P. Veyssire,Y. Umakoshi, Philosophical Magazine Letters, Vol. 87, No. 10, p. 705-712, 2007/10
  • A Model for Estimaion of Viscosity of Molten Aluminosilicate Containing Alkali Oxides, M.Nakamoto,Y.Miyabayashi,L.Holappa,T.Tanaka, ISIJ International, 2007/10
  • Design of swirling flow submerged entry nozzles for optimal head consnmption between tundish and mold, Y.Tugaguchi,O.Nakamura,P.jonson,S.Yokoya,T.Tanaka,S.Hara, ISIJ International, 2007/10
  • Swirling flow submerged entry nozzle for round billet casting, Yuichi Tsukaguchi,Hiroshi Hayashi,Shinichiro Yokoya,Toshihiro Tanaka,Shigeta Hara, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 93, No. 9, p. 575-582, 2007/09
  • Trial of Capillary Refining in Steelmaking Process, T. Tanaka,M. Ueda,Y. Ogiso,M. Ohmachi, 2007/09
  • 丸ビレット連続鋳造用旋回流浸漬ノズル塚口, 塚口友一,林浩史,横谷真一郎,田中敏宏,原茂太, 鉄と鋼, 2007/09
  • 水熱反応を利用したスラグ・ガラスの固化体成形, 田中敏宏,吉川健,平井信充,佐藤進佑,細川将,前田壮一郎, 材料とプロセス, Vol. 20, No. 4, 2007/09/01
  • The influence of Si, Mn on dynamic wetting of liquid zinc to steel, Yoshihisa Takada,Shunsuke Shimada,Joonho Lee,Masao Kurosaki,Toshihiro Tanaka, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 93, No. 8, p. 532-537, 2007/08
  • Unusual Wetting of Liquid Bismuth on a Surface-Porous Unusual Wetting of Liquid Bismuth on a Surface-porous Copper Substrate Fabricated by Oxidation-reduction Process, N.Takahira,T.Yosikawa,T.Tanaka,L.Holappa, Materials Transaction, 2007/08
  • Effect of Iron Substrate on educed Porous Morphologies Adequate for Unusual Wetting, N.Takahira,T.Tanaka, Materials Transactions, 2007/08
  • 溶融亜鉛の動的濡れ性に及ぼす鋼中Si、Mnの影響, 高田良久,島田俊輔,李俊昊,黒崎將夫,田中敏宏, 鉄と鋼, Vol. 93, No. 8, p. 532-537, 2007/08
  • Estimation of Surface Tension of Molten Silicates using Neural Network Computation, M.Nakamoto,M.Hanao,T.Tanaka,M.Kawamoto,L.Holappa,M.Hamalainen, ISIJ International, Vol. 47, No. 8, p. 1075-1081, 2007/08
  • Wettability of Liquid IN and Bi on Flat and Porous Solid Iron Substrate, N.Takahira,T.Yoshikawa,T.Tanaka,L.Holappa, Materiars Transaction, Vol. 48, No. 10, p. 2708-2711, 2007/07
  • Trial to evaluate wettability of liquid Zn with steel sheets containing Si and Mn, Shunsuke Shimada,Yoshihisa Takada,Joonho Lee,Toshihiro Tanaka, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 93, No. 3, p. 215-219, 2007/03
  • Fabrication of loe temperature foaming glass materials using hydrothermal treatment, T.Yoshikawa,S.Stou,T.Tanaka, materials ScienceForum, 2007/03
  • Unusual Wetting Behavior of Liquid Metals on Porous layer formed at Surface of Iron Substrateprepared by Oxidation-Reaction Process, N.Takahira,T.Yoshikawa,T.Tanaka, Materials Science Forum, 2007/03
  • Intrinsic contact angle and contact interaction between liquid silver and solid graphite, Joonho Lee,Kazufumi Seo,Nobumitsu Hirai,Nobuyoki Takahira,Toshihiro Tanaka, Metals and Materials International, Korean Institute of Metals and Materials, Vol. 13, No. 2, p. 83-86, 2007
  • Application of hydrothermal reaction to recycling of blast furnace slag, Toshihiro Tanaka,Nobumitsu Hirai,Soichiro Maeda,Masashi Nakamoto,Masaru Hosokawa, 4th International Congress on the Science and Technology of Ironmarking, ICSTI 2006, Proceedings, p. 704-706, 2006/12/01
  • Microstructure and plastic deformation behavior of Ni3(Ti,X) (X = Nb,Al) single crystals with long-period geometrically closely packed crystal structures, K. Hagihara,T. Tanaka,H. Fujimoto,T. Nakano,Y. Umakoshi, Intermetallics, Vol. 14, No. 10-11, p. 1332-1338, 2006/10
  • Investigation of Liquidus Area and Fluidity of Oxides Affecting Stable Operation of Melting Furnace, MIYABAYASHI Yoshitsugu,YOSHIKAWA Takeshi,TANAKA Toshihiro, Journal of High Temperature Society, High Temperature Society of Japan, Vol. 32, No. 5, p. 281-288, 2006/09/25
  • 溶解鉄合金、溶解スラグの表面張力・年度の推算, 田中敏宏, 電気製鋼, 2006/03
  • 水熱反応利用による高炉スラグの固化体形成に及ぼすスラグ結晶化度の影響, 前田壮一郎,平井信充,勝山茂,田中敏宏, 材料とプロセス, Vol. 19, No. 1, p. 214-216, 2006/03/01
  • Predicting surface tension and viscosity of molten slag, Tanaka Toshihiro,Suzuki Masanori, SOHN INTERNATIONAL SYMPOSIUM ADVANCED PROCESSING OF METALS AND MATERIALS, VOL 2, p. 223-+, 2006
  • In-Situ Observation by EC-AFM on Reaction Process of Lead Dioxide Positive Electrode for Lead Acid Battery with Constant Current Method, Masashi Shiota,Shigeharu Osumi,Kazumasa Matsui,Nobumitsu Hirai,Toshihiro Tanaka, GS Yuasa Technical Report,, Vol. 2, No. 2, p. 7-11, 2005/12
  • 3成分系平衡状態図の基礎(その1), 長坂徹也,田中敏宏, ふぇらむ, 2005/10
  • Electrochemical Property of Lead Dioxide Formed on Various Lead Alloy Substrates, Masashi Shiota,Tsuyoshi Kameda,Kazumasa Matsui,Nobumitsu Hirai,Toshihiro Tanaka, GS Yuasa Technical Report,, Vol. 2, No. 1, p. 6-12, 2005/06
  • Preparation of high‐strength materials from iron and steel slag by hydrothermal synthesis, and detoxification of Cr in stainless steelmaking slag., 山崎友紀,久保田晃平,平井信充,野村豊,田中敏宏, 材料とプロセス, Vol. 18, No. 1, p. 235-238, 2005/03/01
  • Hydrothermal synthesis of glasscrystalline composite materials and measurements of thermo‐physical properties., 前田壮一郎,平井信充,勝山茂,田中敏宏, 材料とプロセス, Vol. 18, No. 1, p. 239-240, 2005/03/01
  • 電気化学AFMによる金属表面の常温溶解塩中その場観察, 平井信充,久保公彦,田中敏宏, 溶解塩および高温科学, 2004/11
  • Improvements in the Measurements of Surface Tension of Liquid Metals Having Low Capillary Constants by the Large Sessile Drop Method, J. Lee,A. Kiyose,S. Nakatsuka,M. Nakamoto,T. Tanaka, ISIJ International, 44 (2004),No.11, 1793-1799., 2004/11
  • In-situ Electrochemical Atomic force Microscopy of Metal Surface in Room Temperature Molten Salts, Nobumitsu Hirai,Kimihiko Kubo,Toshihiro Tanaka,Shigeta Hara, Molten Salts,, Vol. 47, No. 3, p. 107-113, 2004/10
  • In-situ Electrochemical AFM Observation for Dissolution of Plated Copper in Aqueous Solution, Nobumitsu Hirai,Hideyuki Kanematsu,Toshihiro Tanaka,Takeo Oki, Proc. AESF SUR/FIN 2004 & Interfinish 2004 World Congress,, Vol. p.835-p.839, p. 835-839, 2004/06
  • Effect of barium sulfate and strontium sulfate on charging and discharging of the negative electrode in a lead-acid battery, H Vermesan,N Hirai,M Shiota,T Tanaka, JOURNAL OF POWER SOURCES, ELSEVIER SCIENCE BV, Vol. 133, No. 1, p. 52-58, 2004/05
  • Introduction of Patent Education By PBL Into Laboratory’s Seminar And It’s Educational Effect, Hideyuki Kanematsu,Toshihiro Tanaka,Nobumitsu Hirai,Lee Joonho, Bulletin of Tokai Kagaku Kougyoukai, Vol. 239, No. 239, p. 1-8, 2003/11
  • 溶融Sn-Ag, Sn-Cu合金の表面張力の組成及び温度依存性, 霜田渉,李俊昊,田中敏宏, 2003/10
  • Effect of droplet's size on surface tension measurements of liquid metals using the sessile drop method, Joonho Lee,Shinichi Nakatsuka,Masashi Nakamoto,Toshihiro Tanaka, CAMP-ISIJ, 2003/10
  • Effect of structure on the viscosity of silicate melts, Joonho Lee,Masashi Nakamoto,Toshihiro Tanaka, CAMP-ISIJ, Vol. 16, No. 4, p. 864-866, 2003/10
  • Electrochemical Behavior of Lead Electrode in Sulfuric Acid Solution Containing Sodium Sulfate, Masashi Shiota,Tsuyoshi Kameda,Kazumasa Matsui,Nobumitsu Hirai,Toshihiro Tanaka,Shigeta Hara, Electrochemistry,, Vol. 71, No. 10, p. 873-876, 2003/10
  • In situ EC-AFM observation on Pb electrodes in sulfuric acid solution with or without lignin, Daiji Tabayashi,Nobumitsu Hirai,Masashi Shiota,Toshihiro Tanaka, Proc. 12th Inter. Conf. on Scanning Tunneling Microscopy/ Spectroscopy and Related Techniques (STM '03),, 2003/07
  • Topographical Observation of Tin Precipitation for Pulse Plating by Using SEM & AFM, Hideyuki Kanematsu,Nobumitsu Hirai,Toshihiro Tanaka,Takeo Oki, Proc. AESF SUR/FIN 2003 Conf.,, p. 212-219, 2003/06
  • Thermophysical Properties Required for Numerical Simulation of Single Crystalline Silicon Growth Processes, H. Fukuyama,T. Tsukada,M. Watanabe,Toshihiro Tanaka,T. Baba,T. Hibiya, Vol. 17, No. 3, p. 218-222, 2003/05
  • Thermophysical Properties Required for Numerical Simulation of Silicon Crystal Growth Process, H. Fukuyama,T. Tsukada,M. Watanabe,Toshihiro Tanaka,T. Baba,T. Hibiya, 2003/05
  • シリコン結晶成長プロセスシュミレーションに要求される熱物性値調査, 福山博之,塚田隆夫,渡邊匡人,田中敏宏,馬場哲也,日比谷孟俊, 熱物性, 2003/03
  • Recycling of Iron and Tramp Elements, Toshihiro Tanaka, Seisan to Gijutu,Vol.55, No.3, (2003), pp.42-44., Vol. 55, No. 3, p. 46-48, 2003/03
  • Evaluation of Surface Tension and Viscosity of Molten Slags, Toshihiro Tanaka,M. Nakamoto,T. Usui, Proc. of Japan-Korea Sympojium, ISIJ, Chiba, (2003), pp.56-60., 2003/03
  • Temperature dependence of inward diffusion of underpotentially-deposited Cd into a Au (100) bulk phase under electrochemical environment, Tomofumi Tanaka,Kimihiko Kubo,Nobumitsu Hirai,Shigeta Hara, Materials Transactions, Japan Institute of Metals (JIM), Vol. 44, No. 4, p. 688-691, 2003
  • Prospect for Innovative Continuous Steelmaking Process, T. Tanaka,K. Marukawa,S. Hara, 2002/09
  • Measurements of Solid-Vapor Dihedral Angles for Cu and Ni under Controlled Oxygen Partial Pressu, T. Yoshii,S. Hara,T. Tanaka, Proc. 3rd Intern. Conf. On High Temp. Capillarity, Kurashiki, Japan, (2001), pp. 201-206., 2001/11
  • Evaluation of Interfacial Tension between Liquid Steel and Molten Slag, T. Tanaka,S. Hara, Proc. 6th Intern. Symp. On Molten Salt Chemistry and Technology, Shanghai, China, (2001), pp.322-327, 2001/11
  • Measurement of Surface Tension of Liquid Ga base Alloys by a Sessile Drop Method", Z. Metallkunde, T. Tanaka,M. Matsuda,K. Nakao,Y. Katayama,D. Kaneko,S. Hara,X. Xing,Z. Qiao, Vol. 92, No. 11, p. 1242-1246, 2001/11
  • Thermodynamic Evaluation of Surface Tension of Liquid Metal-Oxygen Systems, T. Tanaka,S. Hara, 2001/11
  • Measurements of Solid-Vapor Dihedral Angles for Cu and Ni under Controlled Oxygen Partial Pressure, T. Yoshii,S. Hara,T. Tanaka, 2001/05
  • Architecture of a Database on Surface Tension of Liquid Pb-Free Alloys for Environmental-Friendly Soldering Materials, Toshihiro Tanaka, 2000/12
  • Application of Thermodynamic Databases to Evaluation of Physico-Chemical Properties of Liquid Steels and Molten Slags, Tohsihiro Tanaka,Shigeta Hara, 2000/11
  • Equations for Accurate Prediction of Viscosities of Molten CaO-SiO2-Fe2O3 and CaO-SiO2-Fe2O3-Al2O3 Slags, Takamichi Iida,Yoshifumi Kita,Kazuyuki Kogamo,Toshihiro Tanaka,Sigeta Hara, 2000/10
  • Recycling of Used Transformers Containing Toxic Polychlorinated Biphenyl (PCB), Hirotoshi Kawabata,Tateo Usui,Katsukiyo Marukawa,Shigeta Hara,Toshihiro Tanaka, 2000/09
  • Dephosphorization of Hot Metals by Using Capillarity of Solid CaO, Tohsihiro Tanaka,Shigeta Hara,Katsukiyo Marukawa, 2000/09
  • Measurement of Heat Content of Cuspidine 3CaO2SiO2CaF2, Hiroki Maruo,Hirofumi Iyama,Takuya Suehiro,Toshihiro Tanaka,Shigeta Hara, 2000/07
  • Recycling of Used Transformers Containing Toxic PCB, Katsukiyo Marukawa,Tohsihiro Tanaka,Shigeta Hara, 2000/06
  • Application of Thermodynamic Databases to Evaluation of Surface Tension of Liquid Iron Alloys and Molten Slags, and Interfacial Tension between Liquid Iron and Molten Slag, Toshihiro Tanaka,Shigeta Hara, 2000/03
  • Resource Recycling of Used Transformers Containing PCB, Katsukiyo Marukawa,Toshihiro Tanaka,Shigeta Hara, 2000/03
  • Heat Content/ Properties of Molten Slag, Toshihiro Tanaka,Shigeta Hara, 2000/01
  • Fundamental Investigation of Dephosphorization of Hot Metals by Solid CaO, Katsukiyo Marukawa,Toshihiro Tanaka,Shigeta Hara, 1999/11
  • Application of Two Liquid Phases Separation for Recycling of Fe \& Cu from Iron-Copper Mixed Scraps, Katsukiyo Marukawa,Toshihiro Tanaka,Toshifumi Tagawa,Shigeta Hara, 1999/11
  • Surface Tension / Properties of Molten Slag, Toshihiro Tanaka,Shigeta Hara, 1999/09
  • Wettability / Properties of Molten Slag, Toshihiro Tanaka,Shigeta Hara, 1999/07
  • Surface Tension of Carbon-Saturated Fe-Cu, Fe-Sn and Fe-S Liquid Alloys and their Wettability to Solid Graphite, S. Hara,M. Okamoto,T. Tanaka, Proc. High Temp. Capillarity, Cracow, Poland, (1998), pp. 94-99., 1998/05
  • A Trial of the Recycling of Cu from Iron-Copper Mixed Scraps, Toshihiro Tanaka,Katsukiyo Marukawa,Shigeta Hara,Keisuke Kinoi,Zen-ichiro Morita, Proceedings of The 3rd Inter. Conf. on ECOMATERIALS, Tsukuba, Japan, pp. 188-191, 1997/09
  • Application of Thermodynamic Datanbases to Invesitigation of Physico-Chemical Properties of Molten Salts, Toshihiro Tanaka, 1997/07
  • Role of Fluoride Ions in Molten Oxide-Fluoride Mixtures as Refining Fluxes for Molten Steel, S. Hara,T. Tanaka, Proc. 5th Intern. Conf. on Molten Slags, Fluxes and Salts, Sydney, Australia, (1997-Jan.), pp.455-459., 1997/01
  • Application Thermodynamic Databases to Calculation for Surface Tension of Molten Alloys and Ionic Mixtures, Toshihiro Tanaka,Takamichi Iida,Klaus Hack, 1995/05
  • Prevention of experimental tumorigenesis in colon, liver, and oral cavity by dietary chlorogenic and caffeic acids, T Tanaka,H Mori, 16TH INTERNATIONAL SCIENTIFIC COLLOQUIUM ON COFFEE, VOLS I & II, ASSOC SCIENTIFIQUE INT CAFE, p. 79-87, 1995
  • Characteristics of a New Oscillating-plate Viscometer, T. Iida,T. Tanaka, Proc.of 4th Intern. Conf. on Molten Slags and Fluxes, Iron Steel Inst. Jpn., Tokyo, Japan, (1992-June), pp.444-449., 1992/06
  • An Equation for the Vapor Pressure of Liquid Metals and Calcuation of their Enthalpies of Evaporation, T. Iida,Y. Kita,H. Okano,I. Katayama,T. Tanaka, High. Temp. Mater. Processes, Vol.10, No.4 (1992), pp.199-207., High Temperature Materials and Processes, 1992/04
  • RELATIONSHIP BETWEEN ENTHALPY OF MIXING AND EXCESS ENTROPY IN LIQUID BINARY-ALLOYS, T TANAKA,NA GOKCEN,Z MORITA, ZEITSCHRIFT FUR METALLKUNDE, CARL HANSER VERLAG, Vol. 81, No. 1, p. 49-54, 1990/01
  • Relationship between Enthalpy of Mixing and Excess Entropy in Liquid Binary Alloys, T. Tanaka,N.A. Gokcen,Z. Morita, Z. Metallkde., Vol.81, No.1 (1990), pp.49-54., Zeitschrift fur Metallkunde, Vol. 84, No. 3, p. 192-200, 1990/01
  • Theoretical Evaluation of Various Thermodynamic Properties in Liquid and Solid Binary Alloys Based on Free Volume Theory, T. Tanaka,Z. Morita, Calphad XVII, (1988-July), Berkeley, U.S.A., p.22., 1988/07
  • Thermodynamics on the Equilibrium Distribution of Solute Elements between Solid and Liquid Phases in Iron Alloys, Z. Morita,T. Tanaka, International Ferrous Metallurgy Professor Seminar, (1986-November), Beijing, pp.5-1 - 5-14., 1986/11
  • Thermodynamics on the Distribution of Solute Elements between Solid and Liquid Phases in Alloys and its Application to an Analysis of Micro-segregation in Steel, Z. Morita,T. Tanaka, Proc. of 5th International Iron and Steel Congress, (1986-April), Washington D.C., Book 3, pp.781-789., 1986/04
  • Effects of Solute-interaction on the Equilibrium Distribution of Solute between Solid and Liquid Phases in Iron Base Ternary System, Z. Morita,T. Tanaka, Tetsu-to-Hagane, Vol.70, No.11 (1984), pp.1583-1589., Vol. 70, No. 11, p. 1583-1589, 1984/11
  • Thermodynamics of Solute Distributions between Solid and Liquid Phases in Iron-base Ternary Alloys, Z. Morita,T. Tanaka, Tetsu-to-Hagane, Vol.70, No.11 (1984), pp.1575-1582., Vol. 70, No. 11, p. 1575-1582, 1984/11
  • Distribution of Solute Elements between solid and Liquid Phases in Iron Base Ternary Alloys, Z. Morita,T. Tanaka, Proc. of Japan-U.S. Seminar on Advances in Science of Iron and Steelmaking, (1983- May), Kyoto, pp.37-48., 1983/05
  • Thermodynamics of Solute Distribetions between Solid and liquid Phases in Iron-base Ternary Alloys, Z. Morita,T.Tanaka, Trans. Iron Steel Inst. Jpn., 23(1983), pp.824-833., Transaction of Iron and Steel Institute of Japan, Vol. 23, No. 10, p. 824-833, 1983/03
  • Partition of Carbon between Solid and Liquid in Fe-C Binary System, T. Okamoto,Z. Morita,A. Kagawa,T. Tanaka, Trans. Iron Steel Inst. Jpn., 23 (1983), pp.266-271., Vol. 23, No. 3, p. 266-271, 1983/02
  • EXPERIMENTAL INDUCTION OF UTERINE-CANCER IN RATS BY "N-METHYL-N-NITRO-N-NITROSOGUANIDINE, T TANAKA,H MORI, PATHOLOGY RESEARCH AND PRACTICE, GUSTAV FISCHER VERLAG, Vol. 178, No. 1, p. 20-26, 1983
  • Partition of Carbon between Solid and Liquid in Fe-C Binary System, T. Okamoto,Z. Morita,A. Kagawa,T. Tanaka, Vol. 68, No. 2, p. 244-250, 1982/02

Misc.

  • A Kinetic Model of Mass Transfer and Chemical Reactions at a Steel/Slag Interface under Effect of Interfacial Tension, Peiyuan Ni,Toshihiro Tanaka,Masanori Suzuki,Masashi Nakamoto,Pär G. JÖnsson, ISIJ International, Iron and Steel Institute of Japan, Vol. 59, 2019/05
  • A kinetic model on oxygen transfer at a steel/slag interface under effect of interfacial tension, Peiyuan Ni,Toshihiro Tanaka,Masanori Suzuki,Masashi Nakamoto,Pär Göran Jönsson, ISIJ International, Vol. 58, No. 11, p. 1979-1988, 2018/11
  • Comparison of chemical compositions and micro-structure between flux and slag on submerged arc welding:- Trials for reusing welding slag as welding flux -, KOJIMA Kazuhiro,MIZUKAMI Kazumi,SUZUKI Masanori,TANAKA Toshihiro, JOURNAL OF THE JAPAN WELDING SOCIETY, 一般社団法人 溶接学会, Vol. 36, No. 1, p. 60-67, 2018/01
  • Formation mechanism of fine steel particles in submerged arc welding slag:- Trials for reusing welding slag as welding flux -, KOJIMA Kazuhiro,MIZUKAMI Kazumi,SUZUKI Masanori,TANAKA Toshihiro, JOURNAL OF THE JAPAN WELDING SOCIETY, 一般社団法人 溶接学会, Vol. 36, No. 1, p. 68-76, 2018/01
  • 異方性カスタム設計・AM(3Dプリンター)研究開発センターの概要と展望 : SIP革新的設計生産技術「三次元異方性カスタマイズ化設計・付加製造拠点の構築と地域実証」, 田中 敏宏,中野 貴由,中本 将嗣, Techno net : 大阪大学工業会誌, 大阪大学工業会, No. 571, p. 14-19, 2016/01
  • 次世代再処理ガラス固化技術基盤研究(12)V添加により高充填化したホウケイ酸ガラスの構造解析, 大窪貴洋,岩舘泰彦,鈴木賢紀,梅咲則正,田中敏宏,柿原敏明,橋本拓, 日本原子力学会秋の大会予稿集(CD-ROM), Vol. 2015, 2015/08/21
  • AIN crystal growth using interfacial property between molten iron and solid alumina, Hiroki Goto,Masanori Suzuki,Toshihiro Tanaka, Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, Japan Institute of Metals (JIM), Vol. 79, No. 7, p. 356-361, 2015/07/01
  • Interfacial tension measurements by oscillating drop method for molten steel and oxides interface, Watanabe Masahito,Onodera Kenta,Mizuno Akitoshi,Tanaka Toshihiro,Nakamoto Masashi,Ueno Shoya,Tsukada Takao,Ishikawa Takehiko,Tamaru Haruka, Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency(JAXA)(ISAS), No. 29, p. 129-132, 2015/01
  • Metal-Metal Joining by Unusual Wetting on Surface Fine Crevasse Structure Formed by Laser Treatment, Fukuda Atsushi,Matsukawa Hiroyuki,Goto Hiroki,Suzuki Masanori,Nakamoto Masashi,Matsumoto Ryo,Utsunomiya Hiroshi,Tanaka Toshihiro, J. Japan Inst. Metals, 公益社団法人 日本金属学会, Vol. 79, No. 1, p. 23-28, 2015/01
  • Extending of Application of Hardly Utilizable Iron Scraps Utilizing Two Immiscible Liquid Metals, Vol. 26, No. 2, p. 490-493, 2013/09/17
  • High-Temperature Melts and Materials Processing, TANAKA Toshihiro,FUKUYAMA Hiroyuki,NAKAMOTO Masashi,SUZUKI Masanori, 熱物性 : Japan journal of thermophysical properties, Vol. 26, No. 4, p. 213-214, 2012/11/30
  • Synthesis of Sintered Composite of Crystal and Amorphous Phases on ZrNiSn Half-Heusler System and Investigation of its Thermoelectric Properties, Shigeru Katsuyama,Fumihiro Maezawa,Toshihiro Tanaka, Journal of Japan Society of Powder and Powder Metallurgy, Vol. 58, No. 2, p. 99-104, 2011/02
  • ZrNiSnハーフホイスラー系における結晶相-アモルファス相複合焼結体の作製とその熱電特性の評価, 粉体および粉末冶金, Vol. 第58巻, 第2号, 99, 2011
  • Influence of the Interface on Properties of Thermoelectric Materials, Shigeru Katsuyama,Toshihiro Tanaka, Vol. 37, No. 1, p. 5-9, 2011/01
  • Trial on the Applicaton of Capillary Phenomenon of Solid CaO to Desulfurization of liquid Fe, Toshihiro Tanaka,Yumi Ogiso,Mitsuru Ueda,Joonho Lee, ISIJ International, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 50, No. 8, p. 1071-1077, 2010/08
  • Sulphide Capacity Prediction of Molten Melts by using a Neural Network Approach, Bora Derin,Masanori Suzuki,Toshihiro Tanaka, ISIJ International, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 50, No. 8, p. 1059-1063, 2010/08
  • Design of Porous Glass from By-producs in Materials Processing, Toshihiro Tanaka, JSPS Nordic & Baltic News Letter, Vol. No. 5, 2010/05
  • 溶融合金・イオン性融体・溶融酸化物の表面張力の推算, 田中敏宏, 日本結晶成長学会, Vol. Vol. 37, No. 2, 2010/02
  • Prediction of phase diagrams in nano-sized binary alloys, Toshihiro Tanaka, Materials Science Forum, Trans Tech Publications Ltd, Vol. 653, p. 55-75, 2010
  • Sulphide Capacity Prediction of Molten Slags by Using a Neural Network Approach, Bora Derin,Masanori Suzuki,Toshihiro Tanaka, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 50, No. 8, p. 1059-1063, 2010
  • Prediction of Phase Diagrams in Nano-sized Binary Alloys, Vol. Vol. 653, 2010
  • Trial on the Application of Capillary Phenomenon of Solid CaO to Desulfurization of Liquid Fe, Toshihiro Tanaka,Yumi Ogiso,Mitsuru Ueda,Joonho Lee, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 50, No. 8, p. 1071-1077, 2010
  • Effect of Elements Substitution on Thermoelectric Properties of YbAl3, Shigeru Katsuyama,Toshihiro Tanaka, 2009/09
  • Effect of Added Elements on Thermoelectric Properties of Rare-earth Based Heavy Fermion Intermetallic Compound with Cu3Au-type Structure, Shigeru Katsuyama,Toshihiro Tanaka, 2009/08
  • Effect of Elements Substitution on Thermoelectric Properties of Rare-earth Heavy Fermion Intermetallic Compound with Cu3Au-type Structure, Shigeru Katsuyama,Miho Suzuki,Toshihiro Tanaka, 2009/06
  • Cu3Au型構造を持つ希土類ヘビーフェルミオン金属間化合物の熱電特性に及ぼす元素添加効果, 2009
  • Hydrothermal metallurgy for recycling of slag and glass, Toshihiro Tanaka,Takeshi Yoshikawa,Nobumitsu Hirai,Shigeru Katsuyama, Journal of Physics: Conference Series, Institute of Physics Publishing, Vol. 165, 2009
  • Cu3Au型構造を持つ希土類ヘビーフェルミオン金属間化合物の熱電特性に及ぼす元素添加効果, 2009
  • YbAl3の熱電特性に及ぼす元素添加効果, 2009
  • Hydrothermal Metallurgy for Recycling of Slag and Glass, J. Phys.: Conference Series, Vol. Vol.165, 012077, 2009
  • Prediction of Phase Separation in Multi-component Silicate Glass for Creating Porous Glass Materials from Waste Slag, M. Suzuki,T. Tanaka, Proc. of the 4th Intern. Congress on the Science and Technology of Steelmaking, p. 575-578, 2008/10
  • メカニカルミリングしたSb添加鉛電池正極活物質PbO2の微細組織とその放電特性, 勝山茂,林孔明,平井信充,田中敏宏, 粉体および粉末治金, Vol. 54巻、7号、490-496頁, 2007/12
  • Porosification of Steel Workpiece Surface, Hiroshi Utsunomiya,Shogo Kawajiri,Nobuyuki Takahira,Jyoji Miyamoto,Tetsuo Sakai,Toshihiro Tanaka, Proceedings of the 3rd International Conference on Tribology in Manufacturing Process, Subaru planning, Vol. pp.63-66., 2007/09
  • Evaluation of surface tension of molten slag in multi-component systems, Masahito Hanao,Toshihiro Tanaka,Masayuki Kawamoto,Kouji Takatani, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 47, No. 7, p. 935-939, 2007/07
  • Microscopic Structure and Discharge Characterization of Mechanical-milled Positive Active mass Sb-doped PbO2 of the Lead-acid Battery, Shigeru Katsuyama,Reimei Rin,Nobumitsu Hirai,Toshihiro Tanaka, Journal of Japan Society of Powder and Powder Metallurgy, Vol. 54巻、7号、490-496頁, 2007/07
  • Effect of substrates on the melting temperature of gold nanoparticles, Joonho Lee,Toshihiro Tanaka,Junggoo Lee,Hirotaro Mori, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, PERGAMON-ELSEVIER SCIENCE LTD, Vol. 31, No. 1, p. 105-111, 2007/03
  • Si, Mn含有鋼板への溶融亜鉛の濡れ性に対する定量的評価の試み, 島田峻輔,高田良久,李俊昊,田中敏宏, 鉄と鋼, Vol. 93, No. 3, p. 215-219, 2007/03
  • Simple removal of dioxins by injecting combustion gas into water, Hirotoshi Kawabata,Bokka Yabunaka,Masayuki Tanabe,Tateo Usui,Katsukiyo Marukawa,Shigeta Hara,Toshihiro Tanaka, JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT, SPRINGER, Vol. 9, No. 1, p. 80-89, 2007/03
  • Simple removal of dioxins by injecting combustion gas into water, H. Kawabata,B. Yabunaka,M. Tanabe,T. Usui,K. Marukawa,S. Hara,T. Tanaka, J. Mater. Cycles Waste Manag., SPRINGER, Vol. 9, No. 1, p. 80-89, 2007/02
  • Surface Tension Evaluation of Molten Silicates Containing Surface-Active Components (B2O3, CaF2 or Na2O), M.Nakamoto,T. Tanaka,L. Holappa,M. Hamalainen, ISIJ International, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 47, No. 2, p. 211-216, 2007/02
  • Evaluation of the surface tension of ternary silicate melts containing Al2O3, CaO, FeO, MgO or MnO, M. Nakamoto,A. Kiyose,T. Tanaka,L. Holappa,M. Hamalainen, ISIJ International, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 47, No. 1, p. 38-43, 2007/01
  • Surface tension evaluation of molten silicates containing surface-active components (B2O3, CaF2 or Na2O), Masashi Nakamoto,Toshihiro Tanaka,Lauri Holappa,Marko Hamalainen, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 47, No. 2, p. 211-216, 2007
  • Effect of substrates on the melting temperature of gold nanoparticles, J. Lee,T. Tanaka,J. Lee,H. Mori, Calphad, PERGAMON-ELSEVIER SCIENCE LTD, Vol. 31, No. 1, p. 105-111, 2007/01
  • Evaluation of the surface tension of ternary silicate melts containing Al2O3,CaO, FeO, MgO or MnO, Masashi Nakamoto,Akihito Kiyose,Toshihiro Tanaka,Lauri Holappa,Marko Hamalainen, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 47, No. 1, p. 38-43, 2007
  • Porosification of Steel Workpiece Surface, Proceedings of the 3rd International Conference on Tribology in Manufacturing Process, Vol. pp.63-66., 2007
  • Wetting of Au and Ag particles on monocrystalline graphite substrates, Joonho Lee,Toshihiro Tanaka,Kazufumi Seo,Nobumitsu Hirai,Jung-Goo Lee,Hirotaro Mori, RARE METALS, NONFERROUS METALS SOCIETY CHINA, Vol. 25, No. 5, p. 469-472, 2006/10
  • Prediction of surface and interfacial tension based on thermodynamic data and CALPHAD approach, Qiao Zhiyu,Cao Zhanmin,Tanaka Toshihiro, RARE METALS, NONFERROUS METALS SOCIETY CHINA, Vol. 25, No. 5, p. 512-528, 2006/10
  • Prediction of phase separation in silicate glass for the creation of value-added materials from waste slag, M. Suzuki,T. Tanaka, ISIJ International, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 46, No. 10, p. 1391-1395, 2006/10
  • Wetting of Au and Ag particles on monocrystalline graphite substrates, Joonho Lee,Toshihiro Tanaka,Kazufumi Seo,Nobumitsu Hirai,Jung-Goo Lee,Hirotaro Mori, RARE METALS, NONFERROUS METALS SOCIETY CHINA, Vol. 25, No. 5, p. 469-472, 2006/10
  • Wetting of Au and Ag particles on monocrystalline graphite substrates, Joonho Lee,Toshihiro Tanaka,Kazufumi Seo,Nobumitsu Hirai,Jung-Goo Lee,Hirotaro Mori, RARE METALS, NONFERROUS METALS SOCIETY CHINA, Vol. 25, No. 5, p. 469-472, 2006/10
  • In-situ AFM Observation of Tin Precipitation by Pulse Plating, Hideyuki Kanematsu,Nobumitsu Hirai,Toshihiro Tanaka, Journal of Applied Surface Finishing,, Vol. Vol. 1, No. 3, (2006) pp.221-226., 2006/09
  • Consideration on Effectos of Surface-Active Components on Surface Tensions of Molten Alloys, Takeshi Yoshikawa,Koji Yamamoto,Toshihiro Tanaka,Kazuki Morita, High Temperature Society of Japan, Vol. 32, No. 5, p. 289-294, 2006/09
  • Fundamental study of effect of quinone structures in the lignin preparations on negative electrode of lead-acid battery, Nobumitsu Hirai,Toshihiro Tanaka,Satoshi Kubo,Tsutomu Ikeda,Kengo Magara, JOURNAL OF POWER SOURCES, ELSEVIER SCIENCE BV, Vol. 158, No. 2, p. 846-850, 2006/08
  • Density and hardness of negative pastes of lead-acid batteries containing organic additives with or without quinone structure, N. Hirai,T. Tanaka,S. Kubo,T. Ikeda,K. Magara,I. Ban,M. Shiota, JOURNAL OF POWER SOURCES, ELSEVIER SCIENCE BV, Vol. 158, No. 2, p. 1106-1109, 2006/08
  • Density and hardness of negative pastes of lead-acid batteries containing organic additives with or without quinone structure, Nobumitsu Hirai,Toshihiro Tanaka,Satoshi Kubo,Tsutomu Ikeda,Kengo Magara,Ikumi Ban,Masashi Shiota, J. Power Sources,, ELSEVIER SCIENCE BV, Vol. 158, No. 2, p. 1106-1109, 2006/08
  • Fundamental study of effect of quinone structures in the lignin preparations on negative electrode of lead-acid battery, Nobumitsu Hirai,Toshihiro Tanaka,Satoshi Kubo,Tsutomu Ikeda,Kengo Magara, J. Power Sources,, ELSEVIER SCIENCE BV, Vol. 158, No. 2, p. 846-850, 2006/08
  • 特異拡張濡れに適したポーラス状還元鉄形態に及ぼす下地鉄基板の影響, 髙平 信幸,田中敏宏, 日本金属学会誌, Vol. 70, No. 7, p. 599-605, 2006/07
  • Computing surface tensions of binary and ternary alloy systems with the Gibbsian method, R Pajarre,P Koukkari,T Tanaka,J Lee, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, PERGAMON-ELSEVIER SCIENCE LTD, Vol. 30, No. 2, p. 196-200, 2006/06
  • 廃棄物溶融炉の安定操業に及ぼす高温酸化物の液相領域とその流動性の解析, 宮林良次,吉川 健,田中敏宏, 高温学会誌, Vol. 33, No. 3, p. 1-2, 2006/05
  • 酸化還元した固体鉄基板上の液体InとCuの特異拡張濡れ, 髙平信幸,田中敏宏, 熱物性, Vol. 20, No. 2, p. 70-74, 2006/05
  • 溶融合金の表面張力に及ぼす表面活性成分 の影響にする一考察, 吉川 健,山本耕司,田中敏宏,森田一樹, 高温学会誌, Vol. vol.39, pp. 289-294, 2006/05
  • Anisotropy of wetting of molten Au on differently oriented alpha-Al2O3 single crystals, J Lee,H Ishimura,T Tanaka, SCRIPTA MATERIALIA, PERGAMON-ELSEVIER SCIENCE LTD, Vol. 54, No. 7, p. 1369-1373, 2006/04
  • Surface Tension of Liquid Fe-Ti Alloys at 1823K, J. Lee,A. Kiyose,M. Tanaka,T. Tanaka, ISIJ International, Vol.46, No.4 (2006), pp. 467-471, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 46, No. 4, p. 467-471, 2006/04
  • Anisotropy of wetting of molten Au on differently oriented alpha-Al2O3 single crystals, J Lee,H Ishimura,T Tanaka, SCRIPTA MATERIALIA, PERGAMON-ELSEVIER SCIENCE LTD, Vol. 54, No. 7, p. 1369-1373, 2006/04
  • Fundamental measurements of the friction on an atomically-flat terrace of Au(100) in sulfuric acid soloution under potential control using electrochemical atomic force microscopy, Nobumitsu Hirai,Tatsuya Tooyama,Toshihiro Tanaka, Materials Science Forum,, TRANS TECH PUBLICATIONS LTD, Vol. 512, p. 395-398, 2006/04
  • Evaluation of Surface Tension of Molten Ionic Mixtures, T. Tanaka,T. Kitamura,I. Back, ISIJ International, Vol.46, No.3 (2006), pp.400-406., IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 46, No. 3, p. 400-406, 2006/03
  • Evaluation of Viscosity of Mold Flux by Using Neural Network Computation, M. Hanao,M. Kawamoto,T. Tanaka,M. Nakamoto, ISIJ International, Vol.46, No.3 (2006), pp.346., IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 46, No. 3, p. 346-351, 2006/03
  • In-situ Electrochemical Atomic Force Microscopy on Au(100) in Room Temperature Ionic Liquid: 1-Ethyl-3-methyl-imidazolium Bis(trifluoromethanesulfonyl) Imide, Nobumitsu Hirai,Tomohiko Yokogawa,Toshihiro Tanaka, Japan Journal of Applied Physics,, INST PURE APPLIED PHYSICS, Vol. 45, No. 3, p. 2295-2297, 2006/03
  • Bulk and surface properties of Al-Co and Co-Ni liquid alloys, R. Novakovic,T. Tanaka, Physica B,, ELSEVIER SCIENCE BV, Vol. 371, No. 2, p. 223-231, 2006/03
  • Computing surface tensions of binary and ternary alloy systems with the Gibbsian method, R. Pajarre,P. Koukkari,T. Tanaka,J. Lee, CALPHAD, PERGAMON-ELSEVIER SCIENCE LTD, Vol. 30, No. 2, p. 196-200, 2006/03
  • In-situ electrochemical atomic force microscopy on Au(100) in room temperature ionic liquid: 1-Ethyl-3-methyl-imidazolium bis(trifluoromethanesulfonyl) imide, N Hirai,T Yokogawa,T Tanaka, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, INST PURE APPLIED PHYSICS, Vol. 45, No. 3B, p. 2295-2297, 2006/03
  • In Situ HREM Observation of Crystalline-to-Gas Transition in Nanometer-sized Ag Particles, J.G. Lee,J. Lee,T. Tanaka,H. Mori, Physical Review Letters, AMER PHYSICAL SOC, Vol. 96, No. 7, p. 75504-75504, 2006/03
  • Anisotropy of wetting of molten Au on differently oriented α-Al2O3 single crystals, J. Lee,H. Ishimura,T. Tanaka, Scripta Materialia, PERGAMON-ELSEVIER SCIENCE LTD, Vol. 54, No. 7, p. 1369-1373, 2006/02
  • In situ HREM observation of crystalline-to-gas transition in nanometer-sized Ag particles, JG Lee,J Lee,T Tanaka,H Mori, PHYSICAL REVIEW LETTERS, AMER PHYSICAL SOC, Vol. 96, No. 7, 2006/02
  • Anisotropy of wetting of molten Au on differently oriented α-Al2O3 single crystals, J. Lee,H. Ishimura,T. Tanaka, Scripta Materialia, 54 (2006), pp.1369-1373., Vol. 54 (2006), pp.1369-1373., 2006/02
  • In situ HREM observation of crystalline-to-gas transition in nanometer-sized Ag particles, JG Lee,J Lee,T Tanaka,H Mori, PHYSICAL REVIEW LETTERS, AMER PHYSICAL SOC, Vol. 96, No. 7, 2006/02
  • Bulk and surface properties of Al-Co and Co-Ni liquid alloys, R. Novakovic,T. Tanaka, Physica B: Condensed Matter, Vol. 371, No. 2, p. 223-231, 2006/01/31
  • Effect of TiO_2 on the Viscosity of Molten Slag in SiO_2-CaO-MgO System, NAKAMOTO Masashi,TSUGAWA Yasuhiro,KIYOSE Akihito,LEE Jonhoo,TANAKA Toshihiro, Journal of High Temperature Society., Vol. 32, No. 1, p. 74-77, 2006/01/30
  • Advanced Eco-Materials `Processing from By-Products, T. Tanaka,S. Maeda,N. Takahira,N. Hirai,J. Lee, Materials Science Forum, 512 (2006), pp.305-308., TRANS TECH PUBLICATIONS LTD, Vol. 512, p. 305-308, 2006/01
  • Bulk and surface properties of Al-Co and Co-Ni liquid alloys, R. Novakovic,T. Tanaka, Physica B, 371 (2006), pp.223-231., Vol. 371 (2006), pp.223-231., 2006/01
  • Novel method determining contact angle of liquid au on solid Al2O3 single crystal (0001) surface at 1373K, J Lee,H Ishimura,T Tanaka, ADVANCED STRUCTURAL AND FUNCTIONAL MATERIALS DESIGN, PROCEEDINGS, TRANS TECH PUBLICATIONS LTD, Vol. 512, p. 309-312, 2006
  • Design of lubricants using waste slag in large strain addition strip processing for ultrafine-grained steels, M Nakamoto,J Lee,T Tanaka, ADVANCED STRUCTURAL AND FUNCTIONAL MATERIALS DESIGN, PROCEEDINGS, TRANS TECH PUBLICATIONS LTD, Vol. 512, p. 319-323, 2006
  • 平衡状態図の熱力学の基礎, 田中敏宏,長坂徹也, ふぇらむ, Vol. 11, No. 1, p. 15-22, 2006/01
  • Effect of TiO_2 on the Viscosity of Molten Slag in SiO_2-CaO-MgO System, NAKAMOTO Masashi,TSUGAWA Yasuhiro,KIYOSE Akihito,LEE Jonhoo,TANAKA Toshihiro, Journal of High Temperature Society., Vol. 32, No. 1, p. 74-77, 2006/01
  • In situ HREM observation of crystalline-to-gas transition in nanometer-sized Ag particles, J. G. Lee,J. Lee,T. Tanaka,H. Mori, Physical Review Letters, Vol. 96, No. 7, p. 75504-75504, 2006
  • Evaluation of viscosity of Mold flux by using neural network computation, M Hanao,M Kawamoto,T Tanaka,M Nakamoto, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 46, No. 3, p. 346-351, 2006
  • Design of lubricants using waste slag in large strain addition strip processing for ultrafine-grained steels, M Nakamoto,J Lee,T Tanaka, ADVANCED STRUCTURAL AND FUNCTIONAL MATERIALS DESIGN, PROCEEDINGS, TRANS TECH PUBLICATIONS LTD, Vol. 512, p. 319-323, 2006
  • Advanced eco-materials processing from by-products, T Tanaka,S Maeda,N Takahira,N Hirai,J Lee, ADVANCED STRUCTURAL AND FUNCTIONAL MATERIALS DESIGN, PROCEEDINGS, TRANS TECH PUBLICATIONS LTD, Vol. 512, p. 305-308, 2006
  • Novel method determining contact angle of liquid au on solid Al2O3 single crystal (0001) surface at 1373K, J Lee,H Ishimura,T Tanaka, ADVANCED STRUCTURAL AND FUNCTIONAL MATERIALS DESIGN, PROCEEDINGS, TRANS TECH PUBLICATIONS LTD, Vol. 512, p. 309-312, 2006
  • Fundamental measurements of the friction on an atomically-flat terrace of Au(100) in sulfuric acid solution under potential control using electrochemical atomic force microscope, N Hirai,T Tooyama,T Tanaka, ADVANCED STRUCTURAL AND FUNCTIONAL MATERIALS DESIGN, PROCEEDINGS, TRANS TECH PUBLICATIONS LTD, Vol. 512, p. 395-398, 2006
  • 溶融合金の表面張力に及ぼす表面活性成分 の影響にする一考察, 高温学会誌, Vol. Vol.39, No.5, (2006), pp.289-294, 2006
  • Design of lubricants using waste slag in large strain addition strip processing for ultrafine-grained steels, Masashi Nakamoto,Joonho Lee,Toshihiro Tanaka, Materials Science Forum, Vol. 512, p. 319-324, 2006
  • Fundamentals of Thermodynamics on Phase Diagrams, T. Tanaka,T. Nagasaka, Bulletin of The Iron and Steel Institute of Japan,Vol.11, No.1 (2006), pp.15-22., Vol. 11, No. 1, p. 15-22, 2006/01
  • Novel method determining contact angle of liquid au on solid Al2O3 single crystal (0001) surface at 1373K, J Lee,H Ishimura,T Tanaka, ADVANCED STRUCTURAL AND FUNCTIONAL MATERIALS DESIGN, PROCEEDINGS, TRANS TECH PUBLICATIONS LTD, Vol. 512, p. 309-312, 2006
  • Advanced eco-materials processing from by-products, T Tanaka,S Maeda,N Takahira,N Hirai,J Lee, ADVANCED STRUCTURAL AND FUNCTIONAL MATERIALS DESIGN, PROCEEDINGS, TRANS TECH PUBLICATIONS LTD, Vol. 512, p. 305-308, 2006
  • Bulk and surface properties of Al-Co and Co-Ni liquid alloys, R Novakovic,T Tanaka, PHYSICA B-CONDENSED MATTER, ELSEVIER SCIENCE BV, Vol. 371, No. 2, p. 223-231, 2006/01
  • Design of Lubricants using Waste Slag in Large Strain Addition Strip Processing for Ultra-grained Steels, M. Nakamoto,J. Lee,T. Tanaka, Materials Science Forum, 512 (2006), pp.319-324., Vol. 512 (2006), pp.319-324, 2006/01
  • Evaluation of surface tension of molten ionic mixtures, Toshihiro Tanaka,Tomoko Kitamura,Ida Annika Back, ISIJ International, Vol. 46, No. 3, p. 400-406, 2006
  • Advanced eco-materials processing from by-products, T Tanaka,S Maeda,N Takahira,N Hirai,J Lee, ADVANCED STRUCTURAL AND FUNCTIONAL MATERIALS DESIGN, PROCEEDINGS, TRANS TECH PUBLICATIONS LTD, Vol. 512, p. 305-308, 2006
  • Evaluation of viscosity of Mold flux by using neural network computation, M Hanao,M Kawamoto,T Tanaka,M Nakamoto, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 46, No. 3, p. 346-351, 2006
  • Novel Method Determining Contact Angle of Liquid Au on Solid Al2O3 Single Crystal (0001) Surface at 1373K, J. Lee,H. Ishimura,T. Tanaka, Materials Science Forum, 512 (2006), pp.309-312., Vol. 512 (2006), pp.309-312, 2006/01
  • Evaluation of viscosity of mold flux by using neural network computation, Masahito Hanao,Masayuki Kawamoto,Toshihiro Tanaka,Masashi Nakamoto, ISIJ International, Vol. 46, No. 3, p. 346-351, 2006
  • Surface tension of liquid Fe-Ti alloys at 1 823 K, Joonho Lee,Akihito Kiyose,Masayuki Tanaka,Toshihiro Tanaka, ISIJ International, Vol. 46, No. 4, p. 467-471, 2006
  • In-situ AFM Observation of Tin Precipitation by Pulse Plating, Journal of Applied Surface Finishing,, Vol. Vol. 1, No. 3, (2006) pp.221-226., 2006
  • Prediction of phase separation in silicate glass for the creation of value-added materials from waste slag, ISIJ International, Vol. Vol.46, No.10, (2006),pp.1391-1395, 2006
  • Unusual wetting of liquid metals on iron substrate with oxidized surface in reduced atmosphere, N Takahira,T Tanaka,S Hara,J Lee, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 46, No. 12, p. 3008-3014, 2005/12
  • Unusual wetting of liquid metals on iron substrate with oxidized surface in reduced atmosphere, N Takahira,T Tanaka,S Hara,J Lee, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 46, No. 12, p. 3008-3014, 2005/12
  • Unusual Wetting of Liquid Metals on Iron Substrate with Oxidized Surface in Reduced Atmosphere, N. Takahira,T. Tanaka,S. Hara,J. Lee, Materials Transactions, 46 (2005), pp.3008-3014., JAPAN INST METALS, Vol. 46, No. 12, p. 3008-3014, 2005/12
  • Temperature and oxygen partial pressure dependences of the surface tension of liquid Sn-Ag and Sn-Cu lead-free solder alloys, J Lee,W Shimoda,T Tanaka, MONATSHEFTE FUR CHEMIE, SPRINGER WIEN, Vol. 136, No. 11, p. 1829-1834, 2005/11
  • 3成分系平衡状態図の基礎(その2), 長坂徹也,田中敏宏, ふぇらむ, Vol. 10, No. 11, p. 855-861, 2005/11
  • Use of Slag Containing Water as Lubricant in High Straining Rolling for Ultrafine-grained Stee, M. Nakamoto,J. Lee,T. Tanaka,J. Ikeda,S. Inagaki, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 45, No. 11, p. 1567-1571, 2005/11
  • Application of Capillary Refining to De-P and De-S in Molten Steel, T. Tanaka,Y. Ogiso,M. Ueda, Proc. the 3rd Japan-Korea Workshop on Science and Technology of Ironmaking and Steelmaking, ISIJ, Chiba, (2005), pp.105-108., 2005/11
  • Bulk and surface properties of liquid Ag-X (X = Ti, Hf) compound forming alloys, R Novakovic,T Tanaka,ML Muolo,J Lee,A Passerone, SURFACE SCIENCE, ELSEVIER SCIENCE BV, Vol. 591, No. 1-3, p. 56-69, 2005/10
  • Introduction of Research Laboratories (49) Interface Science and Technology Laboratory, Thermophysics and Technology on Materials Group, Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University, Toshihiro Tanaka,Nobumitsu Hirai, JAPAN TAPPI JOURNAL,, Vol. Vol.59, No.10, (2005) pp.1532-1533., 2005/10
  • Bulk and surface properties of liquid Ag-X (X=Ti, Hf) compound forming alloys, R. Novakovic,T. Tanaka,M.L. Muolo,J.Lee,A. Passerone, SURFACE SCIENCE, ELSEVIER SCIENCE BV, Vol. 591, No. 1-3, p. 56-69, 2005/10
  • Temperature and Oxygen Partial Pressure Dependences of the Surface Tension of Liquid Sn-Ag and Sn-Cu lead-free Solder Allo, J. Lee,W. Shimoda,T. Tanaka, Monatshefte fuer Chemie, 136 (2005), pp.1829-1834., SPRINGER WIEN, Vol. 136, No. 11, p. 1829-1834, 2005/10
  • Fundamentals of Thernary Phase Diagrams(Part1), T. Nagasaka,T. Tanaka, Bulletin of The Iron and Steel Institute of Japan,Vol.10, No.10 (2005), pp.810-815., Vol. Vol.10, No.11,(2005), pp.855-861, 2005/10
  • In-situ EC-AFM observation on Au(100) Electrode in Room Temperature Ionic Liquid(EMImBF4), Nobumitsu Hirai,Kimihiko Kubo,Toshihiro Tanaka,Shigeta Hara, Proceedings Volume, Electrode Processes VII,, Vol. (2005) pp.7-14., 2005/09
  • 2成分系状態図の基礎, 田中敏宏,長坂徹也, ふぇらむ, Vol. Vol.10, No.8 pp.674-678., 2005/08
  • 異相界面を利用した環境調和型製鉄関連材料プロセスの検討, 田中敏宏, 山陽特殊製鋼技報, Vol. 12, No. 1, p. 2-11, 2005/07
  • Electrochemical properties of lead dioxides formed on various lead alloy substrates, Masashi Shiota,Tsuyoshi Kameda,Kazumasa Matsui,Nobumitsu Hirai,Toshihiro Tanaka, Journal of Power Sources,, ELSEVIER SCIENCE BV, Vol. 144, No. 2, p. 358-364, 2005/06
  • Unusual wetting of liquid metals on iron substrate with oxidized surface in reduced atmosphere, Nobuyuki Takahira,Toshihiro Tanaka,Shigeta Hara,Joonho Lee, Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, Vol. 69, No. 6, p. 465-471, 2005/06
  • Electrochemical properties of lead dioxides formed on various lead alloy substrates, M Shiota,T Kameda,K Matsui,N Hirai,T Tanaka, JOURNAL OF POWER SOURCES, ELSEVIER SCIENCE BV, Vol. 144, No. 2, p. 358-364, 2005/06
  • Reduction behavior of FeO compact including molten slag, M. Nakamoto,H. Ono-Nakazato,H. Kawabata,T. Usui,T. Tanaka, ISIJ Int., Vol. 44, No. 12, p. 2100-2104, 2005/06
  • Thermodynamic study on the melting of nanometer-sized gold particles on graphite substrate, J Lee,M Nakamoto,T Tanaka, JOURNAL OF MATERIALS SCIENCE, SPRINGER, Vol. 40, No. 9-10, p. 2167-2171, 2005/05
  • A Model for Estimation of Viscosity of Molten Silicate Slag, M. Nakamoto,J. Lee,T. Tanaka, ISIJ Intern, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 45, No. 5, p. 651-656, 2005/05
  • Unusual wetting of liquid copper on iron substrate with oxidized surface, TAKAHIRA Nobuyuki, Vol. 18, No. 1, 2005/03/01
  • Evaluation of Surface Tension of Molten Slag and Ionic Mixtures, TANAKA Toshihiro, Vol. 18, No. 1, p. 138-138, 2005/03/01
  • Reduction Behavior of Wustite Compact Including Molten FeO-SiO_2-CaO Slag, NAKAMOTO Masashi, Vol. 18, No. 1, p. 22-25, 2005/03/01
  • Application of Hydrothermal Reaction on Lubricants using Waste Slag in High Straining Rolling for Ultrafine-grained Steels, NAKAMOTO Masashi, Vol. 18, No. 1, p. 245-248, 2005/03/01
  • Phase diagrams of nanometer-sized particles in binary systems, J Lee,J Lee,T Tanaka,H Mori,K Penttila, JOM, SPRINGER, Vol. 57, No. 3, p. 56-59, 2005/03
  • Thermodynamic Evaluation of Binary Alloy Phase Diagrams of Small Particle Systems, T. Tanaka,M. Nakamoto, Netsu Sokutei, Japan Society of Calorimetry and Thermal Analysis, Vol. 32, No. 2, p. 95-102, 2005/03
  • Surface Properties of Basic Lead-free Solder Alloys in Molten State, J. Lee,W. Shimoda,T. Tanaka, 2005/02
  • Temperature dependence of surface tension of liquid Sn-Ag, In-Ag and In-Cu alloys, J Lee,W Shimoda,T Tanaka, MEASUREMENT SCIENCE AND TECHNOLOGY, IOP PUBLISHING LTD, Vol. 16, No. 2, p. 438-442, 2005/02
  • Activity measurement of liquid Sn-Ag-Bi alloys by fused salt EMF method, Iwao Katayama,Toshihiro Tanaka,Shin-Ichi Akai,Kisao Yamazaki,Takamichi Iida, Materials Science Forum, Vol. 502, p. 129-134, 2005
  • Thermodynamic properties of liquid alloys of the system nickel-copper-cobalt, AG Morachevskii,LB Tsymbulov,EY Kolosova,LS Tsemekhman, RUSSIAN JOURNAL OF APPLIED CHEMISTRY, CONSULTANTS BUREAU/SPRINGER, Vol. 78, No. 1, p. 57-63, 2005/01
  • Activity measurement of liquid Sn-Ag-Bi alloys by fused salt EMF method, Katayama, I,T Tanaka,S Akai,K Yamazaki,T Iida, NEW FRONTIERS OF PROCESSING AND ENGINEERING IN ADVANCED MATERIALS, TRANS TECH PUBLICATIONS LTD, Vol. 502, p. 129-134, 2005
  • 微粒子系2元合金の平衡状態図計算の試み, 熱測定, Vol. vol.32(No.2), pp.95-102., 2005
  • A model for estimation of viscosity of molten silicate slag, M Nakamoto,J Lee,T Tanaka, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 45, No. 5, p. 651-656, 2005
  • Reduction behavior of FeO compact including molten slag, ISIJ Int., Vol. Vol.44 pp.2100-2104., 2005
  • In-situ EC-AFM observation on Au(100) Electrode in Room Temperature Ionic Liquid(EMImBF4), Proceedings Volume, Electrode Processes VII,, Vol. (2005) pp.7-14., 2005
  • シリーズ:大学・官公庁研究機関の研究室紹介(49) 大阪大学大学院工学研究科 マテリアル生産科学専攻 材料エネルギー理工学講座 界面制御工学領域, 紙パ技協誌,, Vol. Vol.59, No.10, (2005) pp.1532-1533., 2005
  • Activity measurement of liquid Sn-Ag-Bi alloys by fused salt EMF method, Iwao Katayama,Toshihiro Tanaka,Shin-Ichi Akai,Kisao Yamazaki,Takamichi Iida, Materials Science Forum, Vol. 502, p. 129-134, 2005
  • Surface Properties of Basic Lead-free Solder Alloys in Molten State, 2005
  • Activity measurement of liquid Sn-Ag-Bi alloys by fused salt EMF method, Katayama, I,T Tanaka,S Akai,K Yamazaki,T Iida, NEW FRONTIERS OF PROCESSING AND ENGINEERING IN ADVANCED MATERIALS, TRANS TECH PUBLICATIONS LTD, Vol. 502, p. 129-134, 2005
  • Phase diagrams of nanometer-sized particles in binary systems, Junggoo Lee,Joonho Lee,Toshihiro Tanaka,Hirotaro Mori,Karri Penttilä, JOM, Minerals, Metals and Materials Society, Vol. 57, No. 3, p. 56-59, 2005
  • Use of slag containing water as a lubricant in high straining rolling for ultrafine-grained steels, M Nakamoto,J Lee,T Tanaka,J Ikeda,S Inagaki, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 45, No. 11, p. 1567-1571, 2005
  • Application of Capillary Refining to De-P and De-S in Molten Steel, Proc. the 3rd Japan-Korea Workshop on Science and Technology of Ironmaking and Steelmaking, ISIJ, Chiba, (2005), pp.105-108., 2005
  • Evaluation of Viscosity of Molten SiO2-CaO-MgO-Al2O3 Slags in Blast Furnace Operation, M. Nakamoto,T. Tanaka,J. Lee,T. Usui, ISIJ Intern., Vol.44, No.12 (2004), pp.2115-2119., Vol. 44, No. 12, p. 2115-2119, 2004/12
  • Application of Thermodynamic Databases to Evaluation of Surface Properties of Alloys and Ionic Mixtures, T. Tanaka, Proc. 12th National Symposium on Phase Diagram, Materials Design and Their Applications, Shenzhen, China, (2004), pp.9-15., Vol. pp.9-15, 2004/11
  • Measurement and calculation of surface tension of undercooled liquid Fe-20wt.% Cu all, J. Xu,Z. Qiao,X. Han,B. Wei,J. Lee,T. Tanaka, Z. Metallkunde, 95 (2004), No.11, pp.1001-1004., CARL HANSER VERLAG, Vol. 95, No. 11, p. 1001-1004, 2004/11
  • Measurement and calculation of surface tension of undercooled liquid Fe-20 wt.% Cu alloy, J Xu,ZY Qiao,XJ Han,BB Wei,J Lee,T Tanaka, ZEITSCHRIFT FUR METALLKUNDE, CARL HANSER VERLAG, Vol. 95, No. 11, p. 1001-1004, 2004/11
  • Effect of Al_2O_3 on viscosity in multi-component molten slag, NAKAMOTO Masashi, Vol. 17, No. 4, p. 778-778, 2004/09/01
  • Measurement of the surface tension of liquid Ga, Bi, Sn, In and Pb by the constrained drop method, T Tanaka,M Nakamoto,R Oguni,J Lee,S Hara, ZEITSCHRIFT FUR METALLKUNDE, CARL HANSER VERLAG, Vol. 95, No. 9, p. 818-822, 2004/09
  • Decay of nano-islands located on Au(100) electrode in room temperature molten salt (EMImBF(4)), K Kubo,N Hirai,T Tanaka,S Hara, SURFACE SCIENCE, ELSEVIER SCIENCE BV, Vol. 565, No. 1, p. L271-L276, 2004/09
  • レーザー顕微鏡を用いた固体基板上におけるミクロな溶融金属の接触角測定方法の開発, 李俊昊,石村博道,田中敏宏, 2004/09
  • Experimental and Theoretical Investigation of Surface Tension of the Iron-Copper Alloys, Z.Y. Qiao,J. Xu,X.J. Han,B.B. Wei,Joonho Lee,Toshihiro Tanaka, 2004/09
  • Surface Tension and Its Temperature Dependence of Liquid Sn-Ag and Sn-Cu Alloys, Joonho Lee,Wataru Shimoda,Toshihiro Tanaka, 2004/09
  • Surface tension and its temperature coefficient of liquid Sn-X (X=Ag, Cu) alloys, J Lee,W Shimoda,T Tanaka, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 45, No. 9, p. 2864-2870, 2004/09
  • Surface Tension and its Temperature Coefficient of Liquid Sn-X (X=Ag, Cu) Alloys, Joonho Lee,Wataru Shimoda,Toshihiro Tanaka, Materials Transactions, JAPAN INST METALS, Vol. 45, No. 9, p. 2864-2870, 2004/09
  • Measurement of the Surface Tension of Liquid Ga, Bi, Sn, In and Pb by the Constrained Drop Method, T. Tanaka,M. Nakamoto,R. Oguni,J. Lee,S. Hara, Z. Metallkd., Vol.95, No.9 (2004), 818-822., CARL HANSER VERLAG, Vol. 95, No. 9, p. 818-822, 2004/09
  • Decay of nano-islands located on Au(1 0 0) electrode in room temperature molten salt (EMImBF4), Kimihiko Kubo,Nobumitsu Hirai,Toshihiro Tanaka,Shigeta Hara, Surface Science Letters,, ELSEVIER SCIENCE BV, Vol. 565, No. 1, p. L271-L276, 2004/09
  • Measurement of the surface tension of liquid Ga, Bi, Sn, In and Pb by the constrained drop method, T Tanaka,M Nakamoto,R Oguni,J Lee,S Hara, ZEITSCHRIFT FUR METALLKUNDE, CARL HANSER VERLAG, Vol. 95, No. 9, p. 818-822, 2004/09
  • Evaluation of the dynamic wetting of molten zinc to the steel sheet containing Si and Mn, Shunsuke Shimada,Joonho Lee,Toshihiro Tanaka,Yoshihisa Takada, CAMP-ISIJ, 2004/09
  • Novel refining process using capillary phenomena of solid CaO, Joonho Lee,Toshihiro Tanaka,Ueda Mitsuru, CAMP-ISIJ, Vol. 17, No. 4, p. 653-654, 2004/09
  • Desulfurization of hotmetal by solid CaO using capillary refining, Yumi Ogiso,Joonho Lee,Toshihiro Tanaka,Ueda Mitsuru, CAMP-ISIJ, 2004/09
  • Surface tension and its temperature coefficient of liquid Sn-X (X=Ag, Cu) alloys, J Lee,W Shimoda,T Tanaka, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 45, No. 9, p. 2864-2870, 2004/09
  • Measurement of the surface tension of liquid Ga, Bi, Sn, in and Pb by the constrained drop method, Toshihiro Tanaka,Masashi Nakamoto,Ryosuke Oguni,Joonho Lee,Shigeta Hara, Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, Vol. 95, No. 9, p. 818-822, 2004/09
  • Oxygen adsorption behavior on the surface of liquid Cu-Ag alloys, J Lee,T Tanaka,Y Asano,S Hara, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 45, No. 8, p. 2719-2722, 2004/08
  • Oxygen adsorption behavior on the surface of liquid Cu-Ag alloys, J Lee,T Tanaka,Y Asano,S Hara, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 45, No. 8, p. 2719-2722, 2004/08
  • Oxygen Adsorption Behavior on the Surface of Cu-Ag Alloys, Joonho Lee,Toshihiro Tanaka,Yuuichi Asano,Shigeta Hara, Materials Transactions, JAPAN INST METALS, Vol. 45, No. 8, p. 2719-2722, 2004/08
  • Oxygen adsorption behavior on the surface of liquid Cu-Ag alloys, J Lee,T Tanaka,Y Asano,S Hara, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 45, No. 8, p. 2719-2722, 2004/08
  • High Temperature Properties of Metallurgical System and Simulation, T. Tanaka,M. Nakamoto,K. Nakashima,N. Saioto, Proc. Australia- Japan Iron & Steelmaking Symposium, Sydney, Australia, (July 2004), CD-Rom., 2004/07
  • Effect of Funnel Angle and Wettability on Swirling Flow of Liquid in the Funnel, H.Nakazato,T. Tanaka,A Okamoto,M. Aono,T. Usui,S. Yokoya,S. Hara, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 90, No. 6, p. 306-311, 2004/06
  • Evaluation of Surface Properties of Liquid Alloys and Molten Ionic Mixtures for Metals Separation Technologies, T. Tanaka,M. Nakamoto,J. Lee, Proc. Metal Separation Technologies III, Copper Mountain, USA, June 20-24, (2004), pp.135-142., Vol. 20-24, pp.135-142, 2004/06
  • 硫酸水溶液中における鉛電極の電気化学的振舞い(第2報)-EC-AFM観察から見た鉛蓄電池への硫酸塩の添加効果, 平井信充,塩田匡史,田中敏宏, 硫酸と工業, Vol. Vol.57, No.6, (2004) pp.93-102., 2004/06
  • 溶融SiO2-CaO-Al2O3系スラグの粘度推算モデル, 田中敏宏,李俊昊,中本将嗣, 2004/06
  • Evaluation of Surface Properties of Liquid Alloys and Molten Ionic Mixtures for Metals Separation Technologies, Toshihiro Tanaka,Masashi Nakamoto,Joonho Lee, 2004/06
  • Electrochemical behavior of a lead electrode in a sulfuric acid solution (Part II) -Addition Effect of sulfate salts in lead-acid batteries revealed by EC-AFM-, Nobumitsu Hirai,Masashi Shiota,Toshihiro Tanaka, sulphuric acid and industry,, Vol. Vol.57, No.6, (2004) pp.93-102., 2004/06
  • Effect of funnel angle and wettability on swirling flow of liquid in the funnel, H Ono-Nakazato,T Tanaka,A Okamoto,M Aono,T Usui,S Yokoya,S Hara, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 90, No. 6, p. 306-311, 2004/06
  • 硫酸水溶液中における鉛電極の電気化学的振舞い(第1報)-鉛蓄電池負極充放電過程のEC-AFM観察ー, 平井信充,塩田匡史,田中敏宏, 硫酸と工業, Vol. Vol.57, No.5, (2004) pp.77-83., 2004/05
  • In-situ EC-AFM observation and CV measurement of effect of BaSO4 and SrSO4 on charging and discharging on negative electrode in lead acid batteries, Horatiu Vermesan,Nobumitsu Hirai,Masashi Shiota,Toshihiro Tanaka, J. Power Sources,, Vol. Vol.133, No.1, (2004) pp.52-58., 2004/05
  • Application of Thermodynamic Database to evaluate physico-chemical properties in materials production and development, Tanaka Toshihiro,Joonho Lee, 2004/05
  • In situ electrochemical atomic force microscopy of Pb electrodes in sulfuric acid solution with or without lignin during anodic oxidation and cathodic reduction, Nobumitsu Hirai,Daiji Tabayashi,Masashi Shiota,Toshihiro Tanaka, J. Power Sources,, ELSEVIER SCIENCE BV, Vol. 133, No. 1, p. 32-38, 2004/05
  • Electrochemical behavior of a lead electrode in a sulfuric acid solution (Part I) -EC-AFM observation on a negative electrode of lead-acid batteries during charging and discharging-, Nobumitsu Hirai,Masashi Shiota,Toshihiro Tanaka, sulphuric acid and industry,, Vol. Vol.57, No.5, (2004) pp.77-83., 2004/05
  • Effect of Funnel Angle and Wettability on Swirling Flow of Liquid in the Funnel, H. Ono-Nakazato,M. Aono,T. Usui,A. Okamoto,Toshihiro Tanaka,S. Yokoya,S. Hara, Proc. 15th Intern. Symp. On Transport Phenomena, Bangkok, Thailand, (2004-May), pp.409-414., Vol. pp.409-414, 2004/05
  • In situ electrochemical atomic force microscopy of lead electrodes in sulfuric acid solution with or without lignin during anodic oxidation and cathodic reduction, N Hirai,D Tabayashi,M Shiota,T Tanaka, JOURNAL OF POWER SOURCES, ELSEVIER SCIENCE BV, Vol. 133, No. 1, p. 32-38, 2004/05
  • Dynamic Reactive Wetting of Zn Alloys on SiO2, Joonho Lee,Katsuaki Matsuoka,Shunsuke Shimada,Toshihiro Tanaka, 2004/04
  • High efficient processes from a view point of physical chemistry of liquids, TANAKA Toshihiro, Vol. 17, No. 1, p. 37-39, 2004/03/01
  • Physico-chemical properties of liquids at high temperature, NAKAMOTO Masashi, Vol. 17, No. 1, p. 60-62, 2004/03/01
  • Effect of oxygen on surface tension of liquid Ag-Sn alloys, JH Lee,T Tanaka,M Yamamoto,S Hara, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 45, No. 3, p. 625-629, 2004/03
  • Effect of capillary constants on the profile of liquid metal droplets during surface tension measurements, Joonho Lee,Masashi Nakamoto,Toshihiro Tanaka, 2004/03
  • 固体鉄基板上の液体銀およびスズの特異拡張濡れ, 高平信幸,李俊昊,田中敏宏, 2004/03
  • Effect of oxygen on surface tension of liquid Ag-Sn alloys, JH Lee,T Tanaka,M Yamamoto,S Hara, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 45, No. 3, p. 625-629, 2004/03
  • Effect of Oxygen on Surface Tension of Liquid Ag-Sn Alloys, Joonho Lee,Toshihiro Tanaka,Masaya Yamamoto,Shigeta Hara, Materials Transactions, JAPAN INST METALS, Vol. 45, No. 3, p. 625-629, 2004/03
  • Extension of the viscosity model for molten silicate to multi-component systems, Masashi Nakamoto,Joonho Lee,Toshihiro Tanaka, CAMP-ISIJ, 2004/03
  • Effect of oxygen on surface tension of liquid Ag-Sn alloys, JH Lee,T Tanaka,M Yamamoto,S Hara, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 45, No. 3, p. 625-629, 2004/03
  • 漏斗内液体の旋回流動に及ぼす漏斗角および濡れ性の影響, 鉄と鋼, Vol.90, No.6, (2004), pp.306-311., Vol. Vol.90, No.6, pp.306-311, 2004
  • Improvements in surface tension measurements of liquid metals having low capillary constants by the constrained drop method, Joonho Lee,Akihito Kiyose,Shinichi Nakatsuka,Masashi Nakamoto,Toshihiro Tanaka, ISIJ International, Vol. 44, No. 11, p. 1793-1799, 2004
  • 溶融シリケートの粘度推算モデルの多元系への拡張, CAMP-ISIJ, 2004
  • 固体CaOの毛細管現象を利用した精錬反応, CAMP-ISIJ, 2004
  • Si、Mn含有鋼板に対する溶融亜鉛の動的濡れ挙動の評価, CAMP-ISIJ, 2004
  • 毛細管現象を利用した固体CaOによる溶銑脱硫, CAMP-ISIJ, 2004
  • Improvements in surface tension measurements of liquid metals having low capillary constants by the constrained drop method, J Lee,A Kiyose,S Nakatsuka,M Nakamoto,T Tanaka, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 44, No. 11, p. 1793-1799, 2004
  • 漏斗内液体の旋回流動に及ぼす漏斗角および濡れ性の影響, 鉄と鋼, Vol. Vol.90, No.6, pp.306-311., 2004
  • Influence of Chlorine Forms and Dechlorination on Dioxins Formation/Suppression in the Combustion Processes, H. Kawabata,T. Usui,H. Ono-Nakazato,M. Tanabe,K. Marukawa,S. Hara,Toshihiro Tanaka, Resources Processing, Vol.51 (2004), pp.56-60., Vol. Vol.51, pp.56-60., 2004/01
  • Effect of Barium Sulfate on Negative Electrode of Lead Acid Battery - An Approach with In-Situ EC-AFM Observation, Nobumitsu Hirai,Horatiu Vermesan,Masashi Shiota,Toshihiro Tanaka, Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, Japan Institute of Metals (JIM), Vol. 68, No. 2, p. 35-38, 2004
  • Characteristics of the absorption and the emission of hydrogen in palladium nanoparticles encapsulated into graphite at 1.0 M Pa hydrogen pressure, Nobumitsu Hirai,Masayuki Takashima,Toshihiro Tanaka,Shigeta Hara, Sci. Technol. Adv. Mat.,, NATL INST MATERIALS SCIENCE, Vol. 5, No. 1-2, p. 181-185, 2004/01
  • Decay of nano-island located on Au(111) electrode in contact with sulfuric acid solution, Nobumitsu Hirai,Masaki Yamauchi,Toshihiro Tanaka,Shigeta Hara, Sci. Technol. Adv. Mat.,, NATL INST MATERIALS SCIENCE, Vol. 5, No. 1-2, p. 115-118, 2004/01
  • In-situ EC-AFM observation and CV measurement of effect of BaSO4 and SrSO4 on charging and discharging on negative electrode in lead acid batteries, J. Power Sources,, Vol. Vol.133, No.1, (2004) pp.52-58., 2004
  • Evaluation of Surface Properties of Liquid Alloys and Molten Ionic Mixtures for Metals Separation Technologies, Proc. Metal Separation Technologies III, Copper Mountain, USA, June 20-24, (2004), pp.135-142., Vol. 20-24, pp.135-142, 2004
  • High Temperature Properties of Metallurgical System and Simulation, Proc. Australia- Japan Iron & Steelmaking Symposium, Sydney, Australia, (July 2004), CD-Rom., 2004
  • Assessment of the Phase Digarams of Nanometer-sized Particles in Binary Systems, JOM, 2004
  • Improvements in surface tension measurements of liquid metals having low capillary constants by the constrained drop method, Joonho Lee,Akihito Kiyose,Shinichi Nakatsuka,Masashi Nakamoto,Toshihiro Tanaka, ISIJ International, Vol. 44, No. 11, p. 1793-1799, 2004
  • Application of Thermodynamic Databases to Evaluation of Surface Properties of Alloys and Ionic Mixtures, Proc. 12th National Symposium on Phase Diagram, Materials Design and Their Applications, Shenzhen, China, (2004), pp.9-15., Vol. pp.9-15, 2004
  • Effect of capillary constants on the profile of liquid metal droplets during surface tension measurements, 2004
  • Dynamic Reactive Wetting of Zn Alloys on SiO2, 2004
  • Application of Thermodynamic Database to evaluate physico-chemical properties in materials production and development, 2004
  • Evaluation of Surface Properties of Liquid Alloys and Molten Ionic Mixtures for Metals Separation Technologies, 2004
  • Experimental and Theoretical Investigation of Surface Tension of the Iron-Copper Alloys, 2004
  • Surface Tension and Its Temperature Dependence of Liquid Sn-Ag and Sn-Cu Alloys, 2004
  • Surface Tension and Its Temperature Coefficient of Liquid Sn-X(X=Ag,Cu) Alloys, Materials Transactions, Vol. Vol.45, pp.2864-2870, 2004
  • Improvements in surface tension measurements of liquid metals having low capillary constants by the constrained drop method, J Lee,A Kiyose,S Nakatsuka,M Nakamoto,T Tanaka, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 44, No. 11, p. 1793-1799, 2004
  • Influence of Chlorine Forms and Dechlorination on Dioxins Formation/Suppression in the Combustion Processes, Resources Processing, Vol. Vol.51, pp.56-60., 2004
  • Characteristics of the absorption and the emission of hydrogen in palladium nanoparticles encapsulated into graphite at 1.0 MPa hydrogen pressure, N Hirai,M Takashima,T Tanaka,S Hara, SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, NATL INST MATERIALS SCIENCE, Vol. 5, No. 1-2, p. 181-185, 2004/01
  • Decay of nano-islands on the surface of a Au(111) electrode in contact with sulfuric acid solution, N Hirai,M Yamauchi,T Tanaka,S Hara, SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, NATL INST MATERIALS SCIENCE, Vol. 5, No. 1-2, p. 115-118, 2004/01
  • Determination of Macro-Contact Angle and Line Tension at High Temperatures for Au/Al2O3 System at 1373K Using a Micro-Scale Wetting Method, Joonho Lee,Kazuki Morita,Toshihiro Tanaka, Materials Transactions, JAPAN INST METALS, Vol. 44, No. 12, p. 2659-2663, 2003/12
  • Determination of macro-contact angle and line tension at high temperatures for Au/Al2O3 system at 1373 K using a micro-scale wetting method, J Lee,K Morita,T Tanaka, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 44, No. 12, p. 2659-2663, 2003/12
  • Evaluation of viscosity of molten slags in blast furnace operation, Toshihiro Tanaka,Masashi Nakamoto,Joonho Lee,Tateo Usui, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 44, No. 12, p. 2115-2119, 2003/11
  • Evaluation of Surface Properties of Liquid Alloys and Molten Salt Mixtures, Toshihiro Tanaka,Nobumitsu Hirai, J. Surf. Sci. Soc. Jpn,, Vol. Vol.24, No.11, pp.694-699., 2003/11
  • In situ observation on Au(100) surface in molten EMImBF(4) by electrochemical atomic force microscopy (EC-AFM), K Kubo,N Hirai,T Tanaka,S Hara, SURFACE SCIENCE, ELSEVIER SCIENCE BV, Vol. 546, No. 1, p. L785-L788, 2003/11
  • Prediction of Surface and Interfacial Tension Based on Thermodynamic Data and CALPHAD Approa, Z. Y. Qiao,Toshihiro Tanaka, Proc. of APDIC 1st World Robin Seminar, ed. T. Mohri, Sapporo, (2003), pp.49-64., NONFERROUS METALS SOCIETY CHINA, Vol. 25, No. 5, p. 512-528, 2003/11
  • In-situ observation on Au(100) surface in molten EMImBF4 by electrochemical atomic force microscopy (EC-AFM), Kimihiko Kubo,Nobumitsu Hirai,Toshihiro Tanaka,Shigeta Hara, Surf. Sci. Lett.,, ELSEVIER SCIENCE BV, Vol. 546, No. 1, p. L785-L788, 2003/11
  • Surface Tension of Molten LiF-MgF2, CaF2 and SrF2 Binary Systems, Toshihiro Tanaka,Atsushi Niino,Nobumitsu Hirai,Shigeta Hara, High Temperature Materials and Processes,, WALTER DE GRUYTER & CO, Vol. 22, No. 3, p. 151-156, 2003/10
  • Evaluation of viscosity of molten slag in blast furnace operation, NAKAMOTO Masashi, The Iron and Steel Institute of Japan, Vol. 16, No. 4, p. 1021-1021, 2003/09/01
  • Experimental Studies on the Factors Influencing the Formation of Dioxins in the Combustion Process, H. Kawabata,T. Usui,H. Ono-Nakazato,M. Tanabe,K. Marukawa,S. Hara,Toshihiro Tanaka, Proc. The Japan/Korea Inter. Symp. On Resources Recycling and Materials Sciences, Osaka, Japan (2003). Pp.137-142., Vol. Pp.137-142, 2003/09
  • RH、DHの大型化に伴う脱ガス反応の促進効果, 中里英樹,田尻浩之,碓井建夫,田中敏宏,丸川雄浄, 鉄と鋼, 89 (2003), pp.1113-1119, Vol. 89, No. 11, p. 1113-1119, 2003/05
  • Effects of Chlorine Sources and Forms on the Formation of Dioxins/Furans in the Combustion Process, T. Usui,H. Kawabata,K. Marukawa,S. Hara,H. Ono-Nakazato,Toshihiro Tanaka, Vol. pp.6.1-6.6, 2003/04
  • Thermodynamics of Surface, Toshihiro Tanaka, Vol. 8, 223-229, 2003/04
  • Viscosity and surface tension of molten silicate slag containing CaF_2, NAKAMOTO Masashi, Vol. 16, No. 1, p. 124-124, 2003/03/01
  • Mechanism of Dioxins/Furans Fromation at HIgh Temperature in Combustion Processes, H. Kawabata,T. Usui,K. Marukawa,S. Hara,Toshihiro Tanaka,H. Ono-Nakazato, ISIJ International, Vol.43, (2003), pp.461-467., IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 43, No. 3, p. 461-467, 2003/03
  • Wettability and Laplace's Equation, Toshihiro Tanaka, Vol. 8, No. 3, p. 161-166, 2003/03
  • Discussion on Thermophysical Properties of Molten Si, Toshihiro Tanaka,M. Nakamoto, Vol. 17, No. 3, p. 213-217, 2003/03
  • Fundamental Physical Chemistry of Interfacial Phenomena, Toshihiro Tanaka, Vol. 8, 80-85, 2003/02
  • 溶融Siの熱物性値に関する一考察, 熱物性, Vol. Vol.17, No.3,(2003), pp.213-217., 2003
  • RH、DHの大型化に伴う脱ガス反応の促進効果, 鉄と鋼, Vol. Vol.9, pp.1113-1119, 2003
  • 硫酸ナトリウムを添加した硫酸水溶液中における鉛電極の電気化学的振舞い, Electrochemistry, Vol. Vol.71, No.10, pp.873-876., 2003
  • Mechanism of dioxins/furans formation at high temperature in combustion processes, H Kawabata,T Usui,K Marukawa,S Hara,T Tanaka,H Ono-Nakazato, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 43, No. 3, p. 461-467, 2003
  • 硫酸ナトリウムを添加した硫酸水溶液中における鉛電極の電気化学的振舞い, Electrochemistry, Vol. 71, No. 10, p. 873-876, 2003
  • 鉄のリサイクルとトランプエレメント, 生産と技術, Vol. 55, No. 3, p. 42-44, 2003
  • Mechanism of dioxins/furans formation at high temperature in combustion processes, H Kawabata,T Usui,K Marukawa,S Hara,T Tanaka,H Ono-Nakazato, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 43, No. 3, p. 461-467, 2003
  • Effects of Chlorine Sources and Forms on the Formation of Dioxins/Furans in the Combustion Process, Vol. pp.6.1-6.6, 2003
  • Experimental Studies on the Factors Influencing the Formation of Dioxins in the Combustion Process, Proc. The Japan/Korea Inter. Symp. On Resources Recycling and Materials Sciences, Osaka, Japan (2003). Pp.137-142., Vol. Pp.137-142, 2003
  • Thermodynamic study of semiconducting related Materials by use of EMF method with solid electrolyte, J. Min. Met, Vol. Vol.39, no(p3-4), pp.453-464, 2003
  • Surface tension of molten LiF-MgF(2),CaF(2) and SrF(2) binary systems, T Tanaka,A Niino,N Hirai,S Hara, HIGH TEMPERATURE MATERIALS AND PROCESSES, WALTER DE GRUYTER & CO, Vol. 22, No. 3-4, p. 151-156, 2003
  • Thermodynamics of equilibrium distribution of solute elements in solidification process of steel, Z Morita,T Tanaka, HIGH TEMPERATURE MATERIALS AND PROCESSES, FREUND PUBLISHING HOUSE LTD, Vol. 22, No. 5-6, p. 329-335, 2003
  • Mechanism of dioxins/furans formation at high temperature in combustion processes, H Kawabata,T Usui,K Marukawa,S Hara,T Tanaka,H Ono-Nakazato, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 43, No. 3, p. 461-467, 2003
  • Thermodynamic Study of Semiconducting related Materials by use of EMF Method with Solid Electrolyte, I. Katayama,T. Tanaka,T. Iida, Vol. Vol.39, no(p3-4), pp.453-464, 2002/09
  • Thermodynamics of Equilibrium Distribution of Solute Elements in Solidification Process of Steel, Z. Morita,T. Tanaka, Proc. Mills Symposium: Metals, Slags, Glasses; High Temperature Properties & Phenomena, London, UK, , ed. by R.E. Aune & S. Sridhar, (2002), pp.179-188, FREUND PUBLISHING HOUSE LTD, Vol. 22, No. 5, p. 329-335, 2002/08
  • 燃焼過程におけるダイオキシン類生成に及ぼす塩素源・塩素形態の影響, 川端弘俊,碓井建夫,丸川雄浄,原 茂太,中里英樹,田中敏宏, 廃棄物学会誌, 13 (2002), pp.184-192., Vol. 13, No. 4, p. 184-192, 2002/08
  • 熱力学データベースを利用した物性値予測, 田中敏宏,原 茂太, セラミックス, Vol. 37, No. 7, p. 524-528, 2002/07
  • Thermodynamic re-optimization of the DyCl3-KCl system, XR Xing,SY Dai,ZQ Zhu,T Tanaka, THERMOCHIMICA ACTA, ELSEVIER SCIENCE BV, Vol. 383, No. 1-2, p. 31-35, 2002/02
  • Thermodynamic re-optimization of the DyCl3-KCl system, XR Xing,SY Dai,ZQ Zhu,T Tanaka, THERMOCHIMICA ACTA, ELSEVIER SCIENCE BV, Vol. 383, No. 1-2, p. 31-35, 2002/02
  • Thermodynamic re-optimization of the DyCl3-KCl system, XR Xing,SY Dai,ZQ Zhu,T Tanaka, THERMOCHIMICA ACTA, ELSEVIER SCIENCE BV, Vol. 383, No. 1-2, p. 31-35, 2002/02
  • Thermodynamics of Equilibrium Distribution of Solute Elements in Solidification Process of Steel, Proc. Mills Symposium: Metals, Slags, Glasses; High Temperature Properties & Phenomena, London, UK, , ed. by R.E. Aune & S. Sridhar, (2002), pp.179-188, Vol. pp.179-188, 2002
  • 燃焼過程におけるダイオキシン類生成に及ぼす塩素源・塩素形態の影響, 廃棄物学会論文誌, Vol. Vol.13, No.4, pp.184-192, 2002
  • 熱力学データベースを利用した物性値予測, セラミックス, Vol. 37, 524-528, 2002
  • Thermodynamical re-optimization of the DyCl3-KCl system, X. Xing,S. Dai,Z. Zhu,T. Tanaka, THERMOCHIMICA ACTA, ELSEVIER SCIENCE BV, Vol. 383, No. 1-2, p. 31-35, 2002/01
  • 燃焼過程におけるダイオキシン類生成に及ぼす塩素類-塩素形態の影響, 廃棄物学会誌, Vol. Vol.13 pp184-192, 2002
  • Thermodynamics of Equilibrium Distribution of Solute Elements in Solidification Process of Steel, Proc. Mills Symposium: Metals, Slags, Glasses; High Temperature Properties & Phenomena, London, UK, , ed. by R.E. Aune & S. Sridhar, (2002), pp.179-188, Vol. pp.179-188, 2002
  • Thermodynamic Evaluation of Nano-Particle Binary Alloy Phase Diagrams, T. Tanaka,S. Hara, Z. Metallkunde, Vol.92, NO.11, (2001), pp.1236-1241., Vol. 92, No. 11, p. 1236-1241, 2001/11
  • Thermodynamic evaluation of binary phase diagrams of small particle systems, T Tanaka,S Hara, ZEITSCHRIFT FUR METALLKUNDE, CARL HANSER VERLAG, Vol. 92, No. 5, p. 467-472, 2001/05
  • Thermodynamic evaluation of binary phase diagrams of small particle systems, T Tanaka,S Hara, ZEITSCHRIFT FUR METALLKUNDE, CARL HANSER VERLAG, Vol. 92, No. 5, p. 467-472, 2001/05
  • Estimation of enthalpy of mixing in the MCl-RECl3 melts (M=alkali metals, RE=rare earth metals), X. Xing,Z. Zhu,S. Dai,T. Tanaka, THERMOCHIMICA ACTA, ELSEVIER SCIENCE BV, Vol. 372, No. 1-2, p. 109-112, 2001/03
  • Application of Capillarity of Solid CaO to Dephoshorization of Hot Metals, Toshihiro Tanaka,Shigeta Hara,Ryosuke Oguni,Kazunori Ueda,Katsukiyo Marukawa, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 41, No. Suppl, p. S70-S72, 2001/03
  • A Trial to Make Double Layer Particle of Carbon-Saturated Fe-Cu Alloy by Using Two Liquid Phases Separation, Toshihiro Tanaka,Toshifumi Tagawa,Yuichi Asano,Shigeta Hara, Vol. 41, No. 1, p. 1-2, 2001/01
  • A trial to make Double Layer Particle of Carbon-Saturated Fe-Cu Alloy by using Two Liquid Phases Separation, Journal of Heat Treatment, Vol. 41, No. 1, p. 1-2, 2001
  • Calculation of surface tension of liquid Bi-Sn alloy using thermochemical application library ChemApp, T Tanaka,K Hack,S Hara, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, PERGAMON-ELSEVIER SCIENCE LTD, Vol. 24, No. 4, p. 465-474, 2000/12
  • Thermodynamics of Surface Tension of Molten Slags, TANAKA Toshihiro, Vol. 13, No. 1, p. 161-161, 2000/03/01
  • Fundamental investigations for dephosphorization of hot metal by the capillarity in solid CaO, OGUNI Ryosuke, Vol. 13, No. 1, 2000/03/01
  • 2液相分離を利用した鉄・銅混合スクラップのリサイクル (特集 環境型社会を目指すプラスチック・家電リサイクル技術) -- (家電リサイクル), 丸川 雄浄,田中 敏宏,原 茂太, 工業材料, 日刊工業新聞社, Vol. 48, No. 3, p. 62-65, 2000/03
  • Calculation of surface tension of liquid Bi-Sn alloy using thermochemical application library ChemApp, Toshihiro Tanaka,Klaus Hack,Shigeta Hara, Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, Elsevier Ltd, Vol. 24, No. 4, p. 465-474, 2000
  • Calculation of surface tension of liquid Bi-Sn alloy using thermochemical application library ChemApp, Toshihiro Tanaka,Klaus Hack,Shigeta Hara, Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, Elsevier Ltd, Vol. 24, No. 4, p. 465-474, 2000
  • Thermodynamic Evaluation of Surface Tension of Liquid Alloys and Molten Ionic Solutions and its Problems, TANAKA Toshihiro, Vol. 10, No. 4, p. 839-839, 1999/09/05
  • Thermodynamics of Surface Tension of Molten Salt Mixtures, Toshihiro Tanaka,Shigeta Hara, ELECTROCHEMISTRY, ELECTROCHEMICAL SOC JAPAN, Vol. 67, No. 6, p. 573-580, 1999/06
  • Application of Thermodynamic Databases to Evaluation of Interfacial Tension between Liquid Steels and Molten Slag, Toshihiro Tanaka,Shigeta Hara, ZEITSCHRIFT FUR METALLKUNDE, CARL HANSER VERLAG, Vol. 90, No. 5, p. 348-354, 1999/05
  • Thermodynamic Evaluation of Surface Tension of Molten Salt Mixtures in Alkali-Halides, Nitrate, Carbonates and Sulfate Systems, Tamotsu Ueda,Toshihiro Tanaka,Shigeta Hara, ZEITSCHRIFT FUR METALLKUNDE, CARL HANSER VERLAG, Vol. 90, No. 5, p. 342-347, 1999/05
  • Use of Thermodynamic Data to Determine Surface Tension and Viscosity of Metallic Alloys, Toshihiro Tanaka,Klaus Hack,Shigeta Hara, MRS BULLETIN, MATERIALS RESEARCH SOCIETY, Vol. 24, No. 4, p. 45-50, 1999/04
  • Thermodynamics of Surface Tension of Liquid Alloys and Molten Slags, TANAKA Toshihiro, Vol. 12, No. 1, p. 197-197, 1999/03/01
  • Measurement on Heat Content of Oxides at Elevated Temperature Using a Drop Calorimeter, Shigeta Hara,Toshihiro Tanaka,Atsushi Nishiwaki, Vol. 23, No. 1, p. 25-30, 1998/11
  • Application of Thermodynamic Databases to Evaluation of Surface Tension of Molten Salt Mixtures, T. Tanaka,S. Hara, Proc. 7th China-Japan Bilateral Conference on Molten Salt Chemistry and Technology, Xian, China, (1998-Oct.), pp.71-76., p. 71-76, 1998/10
  • Thermodynamic Evaluation of Surface Tension of Molten Salt Mixtures, Toshihiro Tanaka,Shigeta Hara,Tamotsu Ueda, PROCEEDINGS OF THE ELEVENTH INTERNATIONAL SYMPOSIUM ON MOLTEN SALTS XI, ELECTROCHEMICAL SOCIETY INC, Vol. 98, No. 11, p. 645-650, 1998/09
  • Evaluation of Surface Tension of Molten Salt Mixtures, Toshihiro Tanaka,Shigeta Hara,Mahoba Ogawa,Tamotsu Ueda, Molten Salt Forum, Vol.~5-6, pp.~213-216, No. 5-6, p. 213-216, 1998/09
  • Thermodynamic Evaluation of the Surface Tension of Molten Salt Mixtures in Common Ion Alkali-Halide Systems, Toshihiro Tanaka,Shigeta Hara,Mahoba Ogawa,Tamotsu Ueda, ZEITSCHRIFT FUR METALLKUNDE, CARL HANSER VERLAG, Vol. 89, No. 5, p. 368-374, 1998/05
  • The wettabilities of graphite by liquid carbon-saturated Fe-Cu, Fe-Sn and Fe-S alloys, Toshihiro Tanaka,Shigeta Hara,Masashi Okamoto, Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, Iron and Steel Institute of Japan, Vol. 84, No. 1, p. 25-30, 1998
  • The wettabilities of graphite by liquid carbon saturated Fe-Cu, Fe-Sn and Fe-S alloys, T Tanaka,S Hara,M Okamoto, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 84, No. 1, p. 25-30, 1998/01
  • 投下型熱量計による高温酸化物の熱含量測定, 高温学会誌, Vol. 23, No. 1, p. 25-30, 1997
  • 合金,セラミックス,半導体などの材料開発への熱力学データベースの応用, 科学と工業, Vol. 71, No. 1, p. 20-29, 1997
  • 溶融鉄合金の表面張力と粘度, 田中 敏宏,原 茂太, まてりあ(日本金属学会会報), Vol. 36, No. 1, p. 47-54, 1997
  • Application of Thermodynamic Databases to Design of Alloys, Ceramics and Semi-conductors, Toshihiro Tanaka,Shigeta Hara, Vol. 71, No. 1, p. 20-29, 1997/01
  • Surface Tension and Viscosity of Liquid Iron Base Alloys, Toshihiro Tanaka,Shigeta Hara, Vol. 36, No. 1, p. 47-54, 1997/01
  • Viscosity of Molten Slags Containing Iron Oxide and Alumina, Shigeta Hara,Kyoshirou Inoue,Toshihiro Tanaka, Proc. 5th Intern. Conf. on Molten Slags, Fluxes and Salts, Sydney, Australia, p. 515-517, 1997/01
  • Evaluation of Surface Tension of Molten Salt Mixtures based on Thermodynamic Databases, T. Tanaka,M. Ogawa,T. Ueda,S. Hara, Proc. 5th Intern. Conf. on Molten Slags, Fluxes and Salts, Sydney, Australia, (1997-Jan.), pp.263-267., p. 263-267, 1997/01
  • Thermodynamic Relationship between Enthalpy of Mixing and Excess Entropy in Solid Solutions of Binary Alloys, Toshihiro Tanaka,Nev A Gokcen,Kumar C. Kumar,Shigeta Hara,Zen-ichiro Morita, ZEITSCHRIFT FUR METALLKUNDE, CARL HANSER VERLAG, Vol. 87, No. 10, p. 779-783, 1996/10
  • Proposal for Architecture of Materials Processing Databases, Toshihiro Tanaka,Shigeta Hara, p. 147-155, 1996/05
  • Application Thermodynamic Databases to Calculation of Surface Tension of Molten Salt Mixtures, Toshihiro Tanaka,Shigeta Hara, Proc. of the 10th International Symp. on Molten Salts, Los Angels, USA, p. 484-491, 1996/05
  • Application of Thermodynamic Databases to the Evaluation of Surface Tensions of Molten Alloys, Salt Mixtures and Oxide Mixtures, Toshihiro Tanaka,Klaus Hack,Takamichi Iida,Shigeta Hara, ZEITSCHRIFT FUR METALLKUNDE, CARL HANSER VERLAG, Vol. 87, No. 5, p. 380-389, 1996/05
  • 溶融合金,混合溶融塩の表面張力の計算への熱力学データベースの応用, 溶融塩および高温化学, Vol. 39, No. 3, p. 173-192, 1996
  • 素材プロセスデータベース構築への提言, 金属(臨時増刊号), p. 147-155, 1996
  • Application of Thermodynamic Databases to the Calculation of Surface Tension of Liquid Metals and Molten Salt Mixtures., TANAKA Toshihiro, 溶融塩および高温化学, Vol. 39, No. 3, p. 173-192, 1996
  • Development of a High Quality Oscillating-plate Viscometer used at High Temperatures, Takamichi Iida,Toshihiro Tanaka, Vol. 48, No. 4, p. 428-428, 1995/04
  • Excess thermodynamic properties of dilute solutions, Toshihiro Tanaka,Nev A. Gokcen, Journal of Phase Equilibria, Springer-Verlag, Vol. 16, No. 1, p. 10-15, 1995/02
  • Development of High Temperature Oscillating-plate Viscometer, Japanese Scientific Monthly, Vol. 48, No. 4, 1995
  • Thermodynamic Relationship between Enthalpy Interaction Parameter and Entropy Interaction Parameter in Liquid Iron-Nitrogein Based Ternary Alloys, T. Tanaka,N.A. Gokcen,T. Iida,Z. Morita, Z. Metallkde., Vol.85, No.10 (1994), pp.696-700., Zeitschrift fuer Metallkunde, Vol. 85, No. 10, p. 696-700, 1994/10
  • Application of CALPHAD Approach to Calculation of Physical Properties of Molten Alloys and Salt Mixtures, T. Tanaka,T. Iida, Proc. of Intern. Symposium on Science and Technology of Metallurgical Processing, ed. by T. Emi and M. Iguchi, Osaka, Japan, (1994-Oct.), pp.7-12., p. 7-12, 1994/10
  • Physical Properties of Liquids and Thermodynamics of Solid-Liquid Equilibria to Investigate Solidification of Multi-component Iron Alloys, T. Tanaka,T. Iida, Proc. of The Second Canada-Japan Symposium on Steelmaking and Continuous Casting, Toronto, Canada, (1994-Aug.), pp.189-200., CANADIAN INST MINING, METALLURGY AND PETROLEUM, p. 189-200, 1994/08
  • Chem Sage, TANAKA Toshihiro, Seminar Textbook of Application of Phase Diagrams in Materials Science and Engineering, 日本金属学会セミナー「材料開発・設計における状態図の基礎と応用」テキスト, p. 101-103, 1994/05
  • Thermodynamics of Solid/Liquid Distribution of Solutes in Solidification of Steels, Z. Morita,T. Tanaka, Proc. of First Intern. Conf. on Materials and Manufacturing Technologies, MATEHN '94, ed. by G. Arghir, Cluj-Napoca, Romania, (1994-May), pp.1-6., p. 1-6, 1994/05
  • ChemSage, 日本金属学会セミナー「材料開発・設計における状態図の基礎と応用」テキスト, p. 101-103, 1994
  • Excess Thermodynaminc Properties of Dilute Solutions, Proc. of Intern. Symp. on Science and Techno. of Metallurgical Processing, p. 47-52, 1994
  • Application of a Thermodynamic Database to Calculation of Surface Tension for Iron Base Liquid Alloys, T. Tanaka,T. Iida, Steel Research, Vol.65, No.1 (1994), pp.21-28., Steel Research, Vol. 65, No. 1, p. 21-28, 1994/01
  • Application of Thermodynamic Databases to Calculation for Physical Properties of Molten Alloys and Salts, T. Tanaka,T. Iida, Proc. of Osaka University-University of Nottingham Joint Symposium: "New Frontiers in Materials Science", ed. by S. Taniguchi and N. Furushiro, Osaka, Japan, (1993-Nov.), pp.11-15., Vol. 11-15, 1993/11
  • Current Status and Some Problems in Physico-chemical Databases of Materials, TANAKA Toshihiro, 日本金属学会会報, Vol. 32, No. 8, p. 535-542, 1993/05
  • Thermodynamic Relationship between Entrolpy of Mixing and Excess Entropy in Liquid Binary Alloys, T. Tanaka,N.A. Gokcen,Z. Morita,T. Iida, Z. Metallkde., Vol.84, No.3 (1993), pp.192-200., Zeitschrift fur Metallkunde, Vol. 84, No. 3, p. 192-199, 1993/03
  • Measurement of activity of gallium in Ga-Sb-In alloys by emf method using zirconia as solid electrolyte, I. Katayama,J. Nakayama,T. Ikura,T. Tanaka,Z. Kozuka,T. Iida, J. Non-Cryst. Solids, Vol.156-158 (1993), pp.393-397., Journal of Non-crystal Solids, Vol. 156, No. 158, p. 393-397, 1993/03
  • Atomic Theories on Energetics of Alloy Formation, N.A. Gokcen,T. Tanaka,Z. Morita, J. Chim. Phys., Vol.90 (1993), pp.233-248., Journal Chim. Phys., Vol. 90, No. 2, p. 233-248, 1993/02
  • Evaluation of Interaction Parameters in Dilute Liquid Ternary Alloys by a Solution Model Based on the Free Volume Theory, T. Tanaka,N.A. Gokcen,P.J. Spencer,Z. Morita,T. Iida, Z. Metallkde., Vol.84, No.2 (1993), pp.100-105., Zeitschrift fur Metallkunde, Vol. 84, No. 2, p. 100-105, 1993/02
  • Current Status and Some Problems in Physico-chemical Databases of Materials, Bulletin of the Japan Institute of Metals, Vol. 32, No. 8, p. 535-542, 1993
  • Effect of Reflected Wave from the Wall of a Vessel and End Effect of the Plate in the Oscillating-plate Method, T. Iida,T. Tanaka,M. Koike, Iron Steel Inst. Jpn. Intern., Vol.33, No.1 (1993), pp.218-223., Iron and Steel Institute Japan International, Vol. 33, No. 1, p. 218-223, 1993/01
  • Equilibrium Partition Coefficients between Solid and Liquid Phases and Activity Coefficients of Solute Elements in Ni Base Binary Dilute Alloys., T. Tanaka,N. Imai,A. Kiyose,T. Iida,Z. Morita, Z. Metallkde. Vol.82, No.11 (1991), pp.836-840., Zeitschrift fur Metallkunde, Vol. 82, No. 11, p. 836-840, 1991/11
  • Estimation of Partial Excess Gibbs Energy of Solutes in Infinitely Dilute Liquid Iron Base binary Alloys., T. Tanaka,N.A. Gokcen,D. Neuschuetz,P.J. Spencer,Z. Morita, Steel Research, Vol.62, No.9 (1991), pp.385-389., Steel Research, Vol. 62, No. 9, p. 385-389, 1991/09
  • Metal Science and Statistical Thermodyramics, 森田善一郎,田中敏宏,飯田孝道, 金属, Vol. 6, 1991/06
  • Software for Chemical Equilibrium Calculation : Chem Sage, TANAKA Toshihiro, 熱測定, Vol. 18, No. 3, p. 174-183, 1991/06
  • Equilibrium Distribution of Sn between Solid and Liquid Phases in Fe-Sn and Fe-C-Sn Alloys, 今井規雄,田中敏宏,湯木敏隆,飯田孝道,森田善一郎, Tetsu-to-Hagane, Vol.77, No.2 (1991), pp.224-230., 鉄と鋼, Vol. 77, No. 2, p. 224-230, 1991/02
  • Fe-SnおよびFe-C-Sn合金におけるSnの固液間平衡分配, 鉄と鋼, Vol. 77, No. 2, 1991
  • Metal Science and Statistical Thermodyramics, Metals, Vol. 6, 1991
  • Software for Chemical Equilibrium Calculation : Chem Sage, Toshihiro Tanaka,Takamichi Iida, Netsu Sokutei, Vol. 18, No. 3, p. 174-183, 1991
  • A Solution Model for the Relation between Enthalpy of Mixing and Excess Entropy in Liquid Binary Alloys, T. Tanaka,N.A. Gokcen,Z. Morita,P.J. Spencer, Anales de Fisica, Serie B, 86 (1990), pp.104-107., ANALES DE FISICA, Serie B, Vol. 86, No. 2, p. 104-107, 1990/05
  • Relationship between Partial Enthalpy of Mixing and Partial Excess Entropy of Solute Elements in Infinitely Dilute Solutions of Liquid Binary Alloys., T. Tanaka,N.A. Gokcen,Z. Morita, Z. Metallkde., Vol.81,No.5 (1990), pp.349-353., Zeitschrift fur Metallkunde, Vol. 81, No. 5, p. 349-353, 1990/05
  • RELATIONSHIP BETWEEN PARTIAL ENTHALPY OF MIXING AND PARTIAL EXCESS ENTROPY OF SOLUTE ELEMENTS IN INFINITELY DILUTE-SOLUTIONS OF LIQUID BINARY-ALLOYS, T TANAKA,NA GOKCEN,ZI MORITA, ZEITSCHRIFT FUR METALLKUNDE, CARL HANSER VERLAG, Vol. 81, No. 5, p. 349-353, 1990/05
  • Equilibrium Distribution Coefficients of Solute Elements between Solid and Liquid Phases in Ni-base Multi-component Alloys, T. Tanaka,N. Imai,Z. Morita, Tetsu-to-Hagen, Vol.75, No.3 (1989), pp.224-230., 鉄と鋼, Vol. 75, No. 3, p. 432-438, 1989/03
  • Ni基多成分系合金における溶質元素の固液間平衡分配係数, 鉄と鋼, Vol. 75, No. 3, 1989
  • Structure and Thermodynamics of Niobium Nitride in Equilibrium with Liquid Fe-Nb-N Alloy, W.G. Jung,Y. Kita,T. Tanaka,Z. Morita, Trans. Jpn. Inst. Metals, Vol.29, No.9 (1988), pp.718-726., Transaction of Japan Institute of Metals, Vol. 29, No. 9, p. 718-726, 1988/09
  • Thermodynamic Treatment of Solid/Liquid Equilibrium Distribution Coefficients of Solutes in Multi-component Iron Alloys, Z. Morita,T. Tanaka,N. Imai,A. Kiyose,Y. Katayama, rans. Iron Steel Inst. Jpn., 28 (1988), pp.198-205., IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 28, No. 3, p. 198-205, 1988/01
  • Estimation of the Free Energy Change of Nitride Formation of Rare Earth Metals in Liquid Iron Alloys, Z. Morita,W.G. Jung,T. Tanaka, Trans. Jpn. Inst. Metals, Vol.28, No.3 (1987), pp.232-237., Transaction of Japan Institute of Metals, Vol. 28, No. 3, p. 232-237, 1987/03
  • Equilibria of Nitride Forming Reactions in Liquid Iron Alloys, Z. Morita,T. Tanaka,T. Yanai, Metall. Trans.B, 18B, March (1987), pp.195-202., Metallurgical Transaction B, Vol. 18, No. 1, p. 195-202, 1987/03
  • Equilibrium Distribution Coeddicient of Phosphorus in Iron Alloys, Z. Morita,T. Tanaka, Trans. Iron Steel Inst. Jpn., 26 (1986), pp.114-120., Transactions of Lron and Steel Institute of Japan, Vol. 26, No. 2, p. 114-120, 1986/01
  • EQUILIBRIA OF NITRIDE FORMING REACTIONS IN LIQUID-IRON ALLOYS, Z MORITA,T TANAKA, JOURNAL OF METALS, MINERALS METALS MATERIALS SOC, Vol. 36, No. 12, p. 9-9, 1984
  • Effects of Solute-interactions on the Equilibrium Distribution of Solute between Solid and Ligwid Phases in Iron Base Terrary Systems, Z. Morita,T. Tanaka, Trans. Iron Steel Inst. Jpn., 24 (1984), pp.206-211., Transactions of Iron and Steel and Steel Institute of Japan, Vol. 24, No. 3, p. 206-211, 1984/01

Publications

  • 熱物性ハンドブック、日本熱物性学会編, 田中敏宏, 養賢堂, 2008/01
  • 鉄鋼物性値便覧 製鐵編, 田中敏宏, (社)日本鉄鋼協会、独立行政法人 日本学術振興会, 2006/04
  • 溶融塩の化学, 田中敏宏, アイシーピー, 2005/01
  • Thermodynamics of the Nano-Sized Particles, Chemical Thermodynamics for Industry, edited by Trevir Letcher, pp.209-218, Toshihiro Tanaka,Joonho Lee,Nobumitsu Hirai, The Royal Society of Chemistry, 2004/10
  • 英語で書く科学・技術論文, 谷口滋次,田中敏宏,飯田孝道,J.D. Cox, 東京化学同人, 1995/07
  • How to write scientific research articles, Tokyo Kagaku Dojin, 1995

Industrial Property Rights

  • 鉛蓄電池及びこれに用いる負極並びに負極活物質, 平井信充,田中敏宏,眞柄謙吾,池田努, 特開2006-172921, 出願日:2004/12, 登録日:2006/06
  • 塑性加工用潤滑剤および塑性加工方法ならびに加工材, 宇都宮裕,高平信幸,田中敏宏,左海哲夫,宮本丈二, 特願2006-344232, 出願日:2006/12
  • 液滴の接触角測定装置及び測定方法, 清瀬明人,大橋渡,田中敏宏, 特願2005-043467, 出願日:2005/02

Works

  • エネルギー半減・環境負荷ミニマムを目指した高炉の革新的製錬反応に関する研究, 2000 - 2004
  • 高張力鋼の亜鉛めっきに関する研究, 2004 -
  • 異相界面を利用した環境調和型先進材料創製プロセスの開発, 2004 -
  • 製鋼用高反応生石灰の開発, 2004 -
  • 水熱合成を利用した製鉄副生物の利材化, 2004 -
  • 溶融飛灰の物性に関する研究, 2004 -
  • 連続鋳造用フラックスの物性に関する研究, 2004 -
  • 黒鉛基板上のナノ粒子液体金属の熱力学的安定性の解明, 2004 -
  • 電解二酸化マンガン電極の電池放電時における表面形態変化のEC-AFMその場観察, 2004 -
  • ナノ微粒子合金の平衡状態図作成ための熱力学データベースの構築, 2004 -
  • 溶融亜鉛めっきに関する基礎研究, 2004 -
  • 鉄鋼スラグおよび土壌の水熱合成による有害成分の固定除去関する基礎研究, 2004 -
  • 液体・固体酸化物間と溶鋼間の界面エネルギーの推算方法の検討, 2004 -
  • ナノ粒子系合金状態用計算用ソフトウェアの開発, 2004 -
  • 金属酸化物と溶融金属との特異な濡れ現象の応用展開, 2001 -
  • 溶鋼/酸化物界面エネルギー測定方法の研究, 2001 -

Awards

  • Sawamura Best Paper Award, TANAKA Toshihiro, Iron and Steel Institute of Japan, 2018/03
  • Best Paper Award, Masanori Suzuki,Aiman Bin Mohd Halil,Yasuo Takahashi,Toshihiro Tanaka, MJIIT Japanese University Consortium, 2013/11
  • 電気化学会溶融塩委員会・溶融塩賞, 田中敏宏, 電気化学会・溶融塩委員会, 2008/01
  • 高温学会・論文賞, 宮林良次,吉川健,田中敏宏, 高温学会, 2007/05
  • 日本鉄鋼協会・学術功績賞, 田中敏宏, 日本鉄鋼協会, 2007/03
  • 学術功績賞, 日本鉄鋼協会, 2007
  • 25 Graphics and 100 Papers Selection, Annual Report of Osaka University Academic Achievement 2004-2005, Kubo Kimihiko,Nobumitsu Hirai,Toshihiro Tanaka,Shigeta Hara, Osaka University, 2005/10
  • 日本鉄鋼協会・山岡賞(共同研究賞), 田中敏宏, 日本鉄鋼協会, 2005/03
  • Best Paper Award of JIM, J. Lee,K. Morita,T. Tanaka, Japan Institute of Metals, 2004/09
  • 日本金属学会論文賞, 2004
  • 日本金属学会功績賞, 田中敏宏, 日本金属学会, 2001/03
  • 日本鉄鋼協会西山記念賞, 田中 敏宏, 日本鉄鋼協会, 1996/03
  • 本多記念研究奨励賞, 田中 敏宏, 本多記念会, 1986/05
  • 日本鉄鋼協会俵論文賞, 田中 敏宏, 日本鉄鋼協会, 1984/03

Academic Activities

  • 全国ダイバーシティネットワーク組織近畿ブロック平成30年度シンポジウム/関西工学教育協会第92回研究集会「男女協働が切り拓く理工系分野の未来~これまでを超えるこれからを~」, 全国ダイバーシティネットワーク組織近畿ブロック,関西工学教育協会, 2019/02 -
  • 平成29年度ダイバーシティ教育研究環境実現シンポジウム, 大阪大学, 2017/09 -
  • 「大阪大学とアジアの大学との研究・教育の交流 ーアジア人材育成研究教育拠点(CAREN)の活動 2016」, アジア人材育成研究教育拠点(CAREN), 2016/03 -
  • 大阪大学のグローバル大学化の基盤形成を目指す活動の現状, アジア人材育成研究教育プログラム(CAREN), 2015/03 -
  • 公開討論 阪大理工系4研究科による国際交流の未来について, アジア人材育成研究教育プログラム(CAREN), 2015/03 -

Committee Memberships

  • 日本鉄鋼協会, 会長, 2018/04 - Present
  • 日本学術振興会製鋼第19委員会, 委員長, 2017/05 - 2019/05