(Duplication :3行) Ultra

Ninshu MA, Qian WANG, Sora TOMITAKA, Makoto TAKAHASHI, Koji MIMURA, Kazuki HARA, Xiao-tao LUO

Journal of the Japan Society for Technology of Plasticity　Vol. 63　No. 740　p. 121-126　2022/09　Research paper (scientific journal)

Low-Temperature Bonding of Copper by Copper Electrodeposition

Shinji Fukumoto, Koki Nakamura, Makoto Takahashi, Yuto Tanaka, Shoya Takahashi, Michiya Matsushima

Materials Transactions　Vol. 63　No. 6　p. 783-788　2022/05　Research paper (scientific journal)

Effect of Bonding Voltage on the Progress of Glass-to-glass Anodic Bonding Using a Conductor Layer as an Intermediary

TAKAHASHI Makoto

28th Symposium on "Microjoining and Assembly Technology in Electronics"　p. 120-125　2022/02　Research paper (conference, symposium, etc.)

Ultrahigh-Strain-Rate-Dependent Material Modeling and Experimental Observation for Studying Cold-Spray-Induced Extreme Plastic Deformation in Pure Nickel Particles

Ninshu MA, Qian WANG, Sora TOMITAKA, Makoto TAKAHASHI, Koji MIMURA, Kazuki HARA, Xiao-tao LUO

Journal of the Japan Society for Technology of Plasticity　Vol. 63　No. 740　p. 121-126　2022　Research paper (scientific journal)

Effect of Interfacial Microstructure on Mechanical Properties of Cold Pressure-Welded Al-Cu Joints Subjected to Annealing

Satoru Nishikawa, Takara Arayashiki, Makoto Takahashi, Jun Chiba, Masahito Nogami, Takenobu Hongo

1　Vol. 30　No. 10　p. 7386-7396　2021/06　Research paper (scientific journal)

Production of Glass-to-glass Anodically-bonded Interfaces in Which Conductive Areas and Insulating Areas Coexist

TAKAHASHI Makoto

27th Symposium on "Microjoining and Assembly Technology in Electronics"　p. 89-94　2021/02　Research paper (conference, symposium, etc.)

Understanding Corrosion Behavior of Magnesium Surface by x-Ray Irradiation for Improved Surface Design and Applications

Katsuyoshi Kondoh, Keisuke Funatsu, Makoto Takahashi, Shufeng Li, Fumiteru Akamatsu, Junko Umeda

JOM　Vol. 72　No. 10　2020/10　Research paper (scientific journal)

Development of a material model for predicting extreme deformation and grain refinement during cold spraying

Qian Wang, Ninshu Ma, Makoto Takahashi, Xiaotao Luo, Changjiu Li

Acta Materialia　Vol. 199　p. 326-339　2020/08　Research paper (scientific journal)

Growth behaviour of creep cracks in the simulated heat-affected zone of modified 9Cr-1Mo steel

Nishikawa S., Hasegawa T., Takahashi M.

Materials at High Temperatures　Vol. 37　No. 4　p. 268-277　2020/07　Research paper (scientific journal)

Effect of application of opposite polarity voltage on interface separation of anodically bonded kovar alloy–borosilicate glass joints

Satoru Nishikawa, Makoto Takahashi

Sensors and Actuators, A: Physical　Vol. 296　p. 367-374　2019/09/01　Research paper (scientific journal)

Effect of substrate temperature on the microstructure and interface bonding formation of plasma sprayed Ni20Cr splat

Jun Wang, Xiao-Tao Luo, Chang-Jiu Li, Ninshu Ma, Makoto Takahashi

Surface & Coatings Technology　Vol. 371　p. 36-46　2019/08　Research paper (scientific journal)

Interfacial reaction behavior and mechanical properties of pure aluminum and magnesium alloy dissimilar materials fabricated by hot press and heat treatment

Junko Umeda, Katsuyoshi Kondoh, Hiroyuki Sannomiya, Tachai Luangvaranunt, Makoto Takahashi, Hiroshi Nishikawa

Materials Characterization　Vol. 157　2019/08　Research paper (scientific journal)

Influence of post-deposition annealing on characteristics of Pt/Al2O3/β-Ga2O3 MOS capacitors

Masafumi Hirose, Toshihide Nabatame, Kazuya Yuge, Erika Maeda, Akihiko Ohi, Naoki Ikeda, Yoshihiro Irokawa, Hideo Iwai, Hideyuki Yasufuku, Satoshi Kawada, Makoto Takahashi, Kazuhiro Ito, Yasuo Koide, Hajime Kiyone

Microelectronic Engineering　Vol. 216　2019/08　Research paper (scientific journal)

Interface separation phenomena during immersion in water of anodically bonded Kovar alloy–borosilicate glass joints with application of opposite polarity

Satoru Nishikawa, Makoto Takahashi

Sensors and Actuators, A: Physical　Vol. 290　p. 125-129　2019/05/01　Research paper (scientific journal)

Magnetite nanocrystal clusters transformed from ferric precursor and their colloidal magnetorheology

H. Abe, K. Kuruma, T. Murakami, M. Takahashi, K. Sato, T. Naka, Y. Suzuki

IOP Conference Series: Materials Science and Engineering　Vol. 479　No. 1　2019/03　Research paper (scientific journal)

Effect of PWHT Conditions on Toughness and Creep Rupture Strength in Modified 9Cr-1Mo Steel Welds

Satoru Nishikawa, Tadayuki Hasegawa, Makoto Takahashi

High Temperature Materials and Processes　Vol. 38　No. 2019　p. 739-749　2019/02/25　Research paper (scientific journal)

TEM Characterization of Explosive Cladding Interfaces between Refractory Metal (group V or VI) and Cu Plates

Pradeep K PARCHURI, Makoto TAKAHASHI, Kazuhiro ITO, Hajime YAMAMOTO, Kazuyuki HOKAMOTO

Journal of Smart Processing　Vol. 8　No. 6　p. 261-266　2019　Research paper (scientific journal)

Deposition behavior, microstructure and mechanical properties of an in-situ micro-forging assisted cold spray enabled additively manufactured Inconel 718 alloy

Xiao-Tao Luo, Meng-Lin Yao, Ninshu Ma, Makoto Takahashi, Chang-Jiu Li

Materials and Design　Vol. 155　No. 5　p. 384-395　2018/10/05　Research paper (scientific journal)

Effects of Insert Metal Type on Interfacial Microstructure During Dissimilar Joining of TiAl Alloy to SCM440 by Friction Welding

Jong-Moon Park, Ki-Young Kim, Kyoung-Kyun Kim, Kazuhiro Ito, Makoto Takahashi, Myung-Hoon Oh

Metals and Materials International　Vol. 24　No. 3　p. 626-632　2018/05/01　Research paper (scientific journal)

Length effect of carbon nanotubes on the strengthening mechanisms in metal matrix composites

B. Chen, J. Shen, X. Ye, L. Jia, S. Li, J. Umeda, M. Takahashi, K. Kondoh

Acta Materialia　Vol. 140　p. 317-325　2017/11/01　Research paper (scientific journal)

Low-temperature metal-to-alumina direct bonding process utilizing redox reaction between silver oxide and organic agent

Koji Asama, Tomoki Matsuda, Tomo Ogura, Tomokazu Sano, Makoto Takahashi, Akio Hirose

Materials Science and Engineering A　Vol. 702　p. 398-405　2017/08/15　Research paper (scientific journal)

Improvement of smooth surface of RuO2 bottom electrode on Al2O3 buffer layer and characteristics of RuO2/TiO2/Al2O3/TiO2/RuO2 capacitors

Tomomi Sawada, Toshihide Nabatame, Thang Duy Dao, Ippei Yamamoto, Kazunori Kurishima, Takashi Onaya, Akihiko Ohi, Kazuhiro Ito, Makoto Takahashi, Kazuyuki Kohama, Tomoji Ohishi, Atushi Ogura, Tadaaki Nagao

Journal of Vacuum Science & Technology A　Vol. 35　No. 6　2017/08　Research paper (scientific journal)

Multiple self-exothermic reactions for room-temperature aluminum bonding via instantaneous melting

Matsuda Tomoki, Takahashi Makoto, Sano Tomokazu, Hirose Akio

MATERIALS & DESIGN　Vol. 121　p. 136-142　2017/05　Research paper (scientific journal)

Effect of Spark-Plasma-Sintering Conditions on Tensile Properties of Aluminum Matrix Composites Reinforced with Multiwalled Carbon Nanotubes (MWCNTs)

B. Chen, H. Imai, J. Umeda, M. Takahashi, K. Kondoh

JOM　Vol. 69　No. 4　p. 669-675　2017/04/01　Research paper (scientific journal)

Solid-state interfacial reaction and load transfer efficiency in carbon nanotubes (CNTs)-reinforced aluminum matrix composites

B. Chen, J. Shen, X. Ye, H. Imai, J. Umeda, M. Takahashi, K. Kondoh

Carbon　Vol. 114　p. 198-208　2017/04/01　Research paper (scientific journal)

Dynamic recrystallization behavior and strengthening-toughening effects in a near-α Ti-xSi alloy processed by hot extrusion

X. X. Ye, H. Imai, J. H. Shen, B. Chen, G. Q. Han, J. Umeda, M. Takahashi, K. Kondoh

Materials Science and Engineering A　Vol. 684　p. 165-177　2017/01/27　Research paper (scientific journal)

Strengthening-toughening mechanism study of powder metallurgy Ti-Si alloy by interrupted in-situ tensile tests

X. X. Ye, H. Imai, J. H. Shen, B. Chen, G. Q. Han, J. Umeda, M. Takahashi, K. Kondoh

Journal of Alloys and Compounds　Vol. 694　p. 82-92　2017　Research paper (scientific journal)

Phase transitions from semiconductive amorphous to conductive polycrystalline in indium silicon oxide thin films

Nobuhiko Mitoma, Bo Da, Hideki Yoshikawa, Toshihide Nabatame, Makoto Takahashi, Kazuhiro Ito, Takio Kizu, Akihiko Fujiwara, Kazuhito Tsukagoshi

Applied Physics Letters　Vol. 109　No. 22　p. 221903-1-221903-5　2016/11/28　Research paper (scientific journal)

Bonding mechanism of Ti/AZ80 dissimilar materials fabricated by spark plasma sintering

Patchara Pripanapong, Junko Umeda, Hisashi Imai, Makoto Takahashi, Katsuyoshi Kondoh

Journal of Multidisciplinary Engineering Science Studies (JMESS)　Vol. 2　No. 10　p. 1009-1013　2016/10　Research paper (scientific journal)

Increase in Fatigue Strength of Butt-Welded High-Tensile-Steel Joints by Friction Stir Processing

Hajime Yamamoto, Kazuhiro Ito, Makoto Takahashi, Kazuyuki Kohama, Hidetoshi Fujii

Proceedings of 10th International Conference on Trends in Welding Research & 9th International Welding Symposium of Japan Welding Society (9WS)　p. 875-878　2016/10　Research paper (international conference proceedings)

Increase in Fatigue Strength and Charpy Absorbed Energies of TIG-welded SS400 Steel Plates by Friction-Stir-Processing Grain-Refinement

Kazuhiro Ito, Tatsuya Okuda, Hiroki Izumi, Makoto Takahashi, Kazuyuki Kohama, Hajime Yamamoto, Hidetoshi Fujii

Proceedings of 10th International Conference on Trends in Welding Research & 9th International Welding Symposium of Japan Welding Society (9WS)　p. 866-869　2016/10　Research paper (international conference proceedings)

Corrosion behavior and strength of dissimilar bonding material between Ti and Mg alloys fabricated by spark plasma sintering

Patchara Pripanapong, Shota Kariya, Tachai Luangvaranunt, Junko Umeda, Seiichiro Tsutsumi, Makoto Takahashi, Katsuyoshi Kondoh

Materials　Vol. 9　No. 8　2016/08/06　Research paper (scientific journal)

Homogeneous double-layer amorphous Si-doped indium oxide thin-film transistors for control of turn-on voltage

Takio Kizu, Shinya Aikawa, Toshihide Nabatame, Akihiko Fujiwara, Kazuhiro Ito, Makoto Takahashi, Kazuhito Tsukagoshi

Journal of Applied Physics　Vol. 120　No. 4　p. 045702-1-045702-5　2016/07/28　Research paper (scientific journal)

Tensile Strength of Ti/Mg Alloys Dissimilar Bonding Material Fabricated by Spark Plasma Sintering

Patchara Pripanapong, Junko Umeda, Hisashi Imai, Makoto Takahashi, Katsuyoshi Kondoh

International Journal of Engineering Innovation & Research　Vol. 5　No. 4　p. 253-259　2016/07　Research paper (scientific journal)

6061および7075アルミニウム合金の水素放出挙動に及ぼす高ひずみ速度変形の影響

堀川 敬太郎, 小椋 智, 宮川 唯, 遠藤 剛, 高橋 誠, 小林 秀敏

軽金属　Vol. 66　No. 2　p. 90-95　2016/03　Research paper (scientific journal)

Anodic bonding of metal to glass, and its aplication to glass/glass bonding

Takahashi Makoto

Ceramics Japan　Vol. 51　No. 2　p. 87-90　2016/02

Simultaneously enhancing strength and ductility of carbon nanotube/aluminum composites by improving bonding conditions

B. Chen, K. Kondoh, H. Imai, J. Umeda, M. Takahashi

Scripta Materialia　Vol. 113　p. 158-162　2016　Research paper (scientific journal)

Improvement of the effective work function and transmittance of thick indium tin oxide/ultrathin ruthenium doped indium oxide bilayers as transparent conductive oxide

Kattareeya Taweesup, Ippei Yamamoto, Toyohiro Chikyow, Gobboon Lothongkum, Kazutoshi Tsukagoshi, Tomoji Ohishi, Sukkaneste Tungasmita, Patama Visuttipitukul, Kazuhiro Ito, Makoto Takahashi, Toshihide Nabatame

Thin Solid Films　Vol. 598　p. 126-130　2016/01/01　Research paper (scientific journal)

Impact of deposition temperature on crystalline structure of plasma-sprayed Al2O3 splats revealed by FIB-HRTEM technique

Er-Juan Yang, Xiao-Tao Luo, Guan-Jun Yang, Chang-Jiu Li, M. Takahashi, S. Kuroda, K. H. Kim

Ceramics International　Vol. 42　No. 1　p. 853-860　2016　Research paper (scientific journal)

Carbon nanotube induced microstructural characteristics in powder metallurgy Al matrix composites and their effects on mechanical and conductive properties

Biao Chen, Shufeng Li, Hisashi Imai, Lei Jia, Junko Umeda, Makoto Takahashi, Katsuyoshi Kondoh

Journal of Alloys and Compounds　Vol. 651　p. 608-615　2015/12/05　Research paper (scientific journal)

Increase of Fatigue Strength of High-Tensile Steel Welds with Increase of Their Yield Stress using Friction Stir Processing

R. Yamasaki, K. Ito, K. Kohama, M. Takahashi, H. Yamamoto, H. Fujii, R. Ueji, C. Shiga

3rd International Conference in Africa and Asia, Welding and Failure Analysis of Engineering Materials (WAFA-2015)　2015/11　Research paper (international conference proceedings)

Characteristics of TiO2/Al2O3/TiO2 Capacitors with Plasma-enhanced ALD RuO2 Bottom Electrode for Future DRAM

T. Sawada, T. Nabatame, I. Yamamoto, K. Kurishima, T. Onaya, A. Ohi, K. Ito, M. Takahashi, K. Kohama, T. Ohishi, A. Ogura, T. Nagao

Proc. 2015 International Workshop on Dielectric thin films for future electron devices - Science and Technology -　2015/11　Research paper (international conference proceedings)

Microstructural evolution and characteristics of weld fusion zone in high speed dissimilar welding of Ti and Al

Su-Jin Lee, Makoto Takahashi, Yousuke Kawahito, Seiji Katayama

International Journal of Precision Engineering and Manufacturing　Vol. 16　No. 10　p. 2121-2127　2015/10/01　Research paper (scientific journal)

高速圧縮変形によるAl?Mg?Si合金の時効硬化性の改善

堀川 敬太郎, 木谷 祐貴, 小椋 智, 廣瀬 明夫, 高橋 誠, 小林 秀敏

軽金属　Vol. 65　No. 10　p. 498-502　2015/10　Research paper (scientific journal)

Epitaxial grain growth during 8YSZ splat formation on polycrystalline YSZ substrates by plasma spraying

Er-Juan Yang, Xiao-Tao Luo, Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu Li, Makoto Takahashi

Surface and Coatings Technology　Vol. 274　p. 37-43　2015/07/25　Research paper (scientific journal)

Load transfer strengthening in carbon nanotubes reinforced metal matrix composites via in-situ tensile tests

Biao Chen, Shufeng Li, Hisashi Imai, Lei Jia, Junko Umeda, Makoto Takahashi, Katsuyoshi Kondoh

Composites Science and Technology　Vol. 113　p. 1-8　2015/06/05　Research paper (scientific journal)

An approach for homogeneous carbon nanotube dispersion in Al matrix composites

Biao Chen, Shufeng Li, Hisashi Imai, Lei Jia, Junko Umeda, Makoto Takahashi, Katsuyoshi Kondoh

Materials and Design　Vol. 72　p. 1-8　2015/05/05　Research paper (scientific journal)

Microstructures and mechanical properties of friction stir welded lap joints of commercially pure titanium and 304 stainless steel

K. Ishida, Y. Gao, K. Nagatsuka, M. Takahashi, K. Nakata

Journal of Alloys and Compounds　Vol. 630　p. 172-177　2015/05/05　Research paper (scientific journal)

Inter-wall bridging induced peeling of multi-walled carbon nanotubes during tensile failure in aluminum matrix composites

Biao Chen, Shufeng Li, Hisashi Imai, Junko Umeda, Makoto Takahashi, Katsuyoshi Kondoh

Micron　Vol. 69　p. 1-5　2015/02/01　Research paper (scientific journal)

Role of the (Ta/Nb)Ox/Al2O3 interface on the flatband voltage shift for Al2O3/(Ta/Nb)Ox/Al2O3 multilayer charge trap capacitors

Toshihide Nabatame, Akihiko Ohi, Kazuhiro Ito, Makoto Takahashi, Toyohiro Chikyo

Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films　Vol. 33　No. 1　2015/01/01　Research paper (scientific journal)

Effects of reducing solvent on copper, nickel, and aluminum joining using silver nanoparticles derived from a silver oxide paste

Tomo Ogura, Shinya Takata, Makoto Takahashi, Akio Hirose

Materials Transactions　Vol. 56　No. 7　p. 1030-1036　2015　Research paper (scientific journal)

Joining of pure copper using Cu nanoparticles derived from CuO paste

Tomoyuki Fujimoto, Tomo Ogura, Tomokazu Sano, Makoto Takahashi, Akio Hirose

Materials Transactions　Vol. 56　No. 7　p. 992-996　2015　Research paper (scientific journal)

Enhanced age hardening in an Al-Mg-Si alloy using high-speed compression

Keitaro Horikawa, Yuki Kitani, Tomo Ogura, Akio Hirose, Makoto Takahashi, Hidetoshi Kobayashi

Materials Transactions　Vol. 56　No. 7　p. 1058-1062　2015　Research paper (scientific journal)

Influence of shot peening and thermal aging treatment on resistance to intergranular corrosion in shielded metal arc weld metal for type 600 nickel base alloy

Satoru Nishikawa, Koichi Ooi, Makoto Takahashi, Takashi Furukawa

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 33　No. 2　p. 153-159　2015　Research paper (scientific journal)

Stability of strengthening effect of in situ formed TiCp and TiBw on the elevated temperature strength of (TiCp + TiBw)/Ti composites

Lei Jia, Biao Chen, Shu-Feng Li, Hisashi Imai, Makoto Takahashi, Katsuyoshi Kondoh

Journal of Alloys and Compounds　Vol. 614　p. 29-34　2014/11/25　Research paper (scientific journal)

Formation of interfacial microstructure in a friction stir welded lap joint between aluminium alloy and stainless steel

T. Nishida, T. Ogura, H. Nishida, M. Fujimoto, M. Takahashi, A. Hirose

Science and Technology of Welding and Joining　Vol. 19　No. 7　p. 609-616　2014/10/01　Research paper (scientific journal)

Peeling of Carbon Nanotubes during Tensile Failure in Al Matrix Composites

Chen Biao, LI Shufeng, Imai Hisashi, JIA Lei, Umeda Junko, Takahashi Makoto, Kondoh Katsuyoshi

Trans. JWRI　Vol. 43　No. 1　p. 29-32　2014/06　Research paper (bulletin of university, research institution)

Fracturing behavior of direct bonded Ti with Mg alloys by Solid state bonding

Pripanapong Patchara, Takahashi Makoto, Umeda Junko, Kondoh Katsuyoshi

Trans. JWRI　Vol. 43　No. 1　p. 25-28　2014/06　Research paper (bulletin of university, research institution)

Effective Work Function of Ultra-thin RuO2 Film

I. Yamamoto, T. Nabatame, T. Katareeya, M. Takahashi, K. Ito, A. Ohi, T. Chikyo, T. Ohishi

Extended Abstracts of the 19th Workshop on Gate Stack Technology and Physics　p. 127-130　2014/06　Research paper (other academic)

Characteristics of charge trap flash memory with Al2O3/(Ta/Nb)Ox/Al2O3 multi-layer by ALD method

T. Nabatame, A. Ohi, K. Ito, M. Takahashi, T. Chikyo

IEICE Technical Report, Silicon Devices and Materials　Vol. IEICE-114　No. 88　p. 31-35　2014/06　Research paper (other academic)

Characteristics of charge trap flash memory with Al2O3/(Ta/Nb)Ox/Al2O3 multi-layer by ALD method

T. Nabatame, A. Ohi, K. Ito, M. Takahashi, T. Chikyo

ECS Transactions　Vol. 61　No. 2　p. 293-300　2014/05　Research paper (international conference proceedings)

Low-current resistance spot welding of pure copper using silver oxide paste

Yuichiro Suzuki, Tomo Ogura, Makoto Takahashi, Akio Hirose

Materials Characterization　Vol. 98　p. 186-192　2014　Research paper (scientific journal)

In situ synthesized Al4C3 nanorods with excellent strengthening effect in aluminum matrix composites

Biao Chen, Lei Jia, Shufeng Li, Hisashi Imai, Makoto Takahashi, Katsuyoshi Kondoh

Advanced Engineering Materials　Vol. 16　No. 8　p. 972-975　2014　Research paper (scientific journal)

Microstructural and electrical properties of copper titanium alloy dispersed with carbon nanotubes via powder metallurgy process+1

Hisashi Imai, Katsuyoshi Kondoh, Shufeng Li, Junko Umeda, Bunshi Fugetsu, Makoto Takahashi

Materials Transactions　Vol. 55　No. 3　p. 522-527　2014　Research paper (scientific journal)

Microstructural evolution and mechanical properties of high strength 3-9% Ni-steel alloys weld metals produced by electron beam welding

S. Khodir, T. Shibayanagi, M. Takahashi, H. Abdel-Aleem, K. Ikeuchi

Materials and Design　Vol. 60　p. 391-400　2014　Research paper (scientific journal)

Characteristics of charge trap flash memory with Al2O3/(Ta/Nb)Ox/Al2O3 multi-layer

T. Nabatame, A. Ohi, K. Ito, M. Takahashi, T. Chikyo

ECS Transactions　Vol. 61　No. 2　p. 293-300　2014　Research paper (international conference proceedings)

Interfacial reaction during dissimilar friction stir lap welding of aluminum alloy to stainless steel

Tomo Ogura, Taichi Nishida, Makoto Takahashi, Hidehito Nishida, Mitsuo Fujimoto, Akio Hirose

Materials Science Forum　Vol. 794-796　No. 794-496　p. 389-394　2014　Research paper (international conference proceedings)

Point defect clusters induced by high-speed deformation and its effect on age-hardening in 6061 aluminum alloys

Keitaro Horikawa, Yuki Kitani, Tomo Ogura, Akio Hirose, Makoto Takahashi, Hidetoshi Kobayashi

Materials Science Forum　Vol. 794-796　No. 794-796　p. 778-783　2014　Research paper (international conference proceedings)

Low-Temperature Crystallization of Thin-Film Semiconductor by Soft X-ray Irradiation

Fumito Kusakabe, Yuki Maruyama, Akira Heya, Naoto Mathuo, Kazuhiro Kanda, Takayasu Motizuki, Kazuhiro Ito, Makoto Takahashi

IEICE Technical Report, Silicon Devices and Materials　Vol. IEICE-113　No. 351　p. 61-66　2013/12　Research paper (other academic)

Crystallization of Si1-xGex multilayer by soft x-ray irradiation

Akira Heya, Naoto Matsuo, Makoto Takahashi, Kazuhiro Ito, Kazuhiro Kanda

Applied Physics Express　Vol. 6　No. 6　2013/06　Research paper (scientific journal)

Laser direct joining of carbon fiber reinforced plastic to aluminum alloy

Kwang-Woon Jung, Yousuke Kawahito, Makoto Takahashi, Seiji Katayama

Journal of Laser Applications　Vol. 25　No. 3　2013/05　Research paper (scientific journal)

Laser direct joining of carbon fiber reinforced plastic to zinc-coated steel

K. W. Jung, Y. Kawahito, M. Takahashi, S. Katayama

Materials and Design　Vol. 47　p. 179-188　2013　Research paper (scientific journal)

Suitability evaluation of plasma ion beam sputtered TiN/TiO xN y multilayers on steel for bio implants

B. Subramanian, R. Ananthakumar, S. Yugeswaran, M. Jayachandran, M. Takahashi, Akira Kobayashi

Vacuum　Vol. 88　No. 1　p. 108-113　2013　Research paper (scientific journal)

Surface Characteristic and Corrosion Phenomena of X-ray Irradiated Pure Mg

FUNATSU Keisuke, SUZUKI Masashi, TAKAHASHI Makoto, IMAI Hisashi, UMEDA Junko, AKAMATSU Fumiteru, KONDOH Katsuyoshi

Trans. JWRI　Vol. 41　No. 2　p. 13-18　2012/12　Research paper (bulletin of university, research institution)

Surface Modification Phenomenon of X-ray Irradiated Pure Mg

FUNATSU Keisuke, UMEDA Junko, TAKAHASHI Makoto, KONDOH Katsuyoshi

Journal of Smart Processing　Vol. 1　No. 6　p. 293-297　2012/10　Research paper (scientific journal)

粉末冶金法を用いたカーボンナノチューブ分散Cu-Ti合金の組織と機械的および電気的特性

今井 久志, 近藤 勝義, 李 樹豊, 梅田 純子, 古月 文志, 高橋 誠

粉体および粉末冶金　Vol. 59　No. 10　p. 609-615　2012/10　Research paper (scientific journal)

Microstructural development at weld interface between Zr-based glassy alloy and stainless steel by resistance microwelding

S. Fukumoto, M. Minami, A. Soeda, M. Matsushima, M. Takahashi, Y. Yokoyama, K. Fujimoto

Journal of Physics: Conference Series　Vol. 379　No. 1　2012　Research paper (international conference proceedings)

Evaluation of Plasma Ion Beam Sputtered TiN/TiAlN Multilayers on Steel for Bio Implant Applications

Balasubramanian Subramanian, Takahashi Makoto, Nishikawa Hiroshi, Kobayashi Akira, Guruswamy Brindha

Transactions of JWRI　Vol. 40　No. 2　p. 55-58　2011/12　Research paper (bulletin of university, research institution)

Study of Anodic Bonding on Microstructure of Joint Interface

Makoto TAKAHASHI, Kenji IKEUCHI

Journal of High Temperature Society　Vol. 37　No. 4　p. 160-168　2011/07

Formation of reaction layers at anodically-bonded metallic glass/silicate glass interfaces

Makoto Takahashi, Yuuki Watatani, Kenji Ikeuchi, Hisamichi Kimura, Akihisa Inoue

Trans. JWRI　Vol. 39　No. 2　p. 223-225　2010/12　Research paper (bulletin of university, research institution)

Anodic Bonding - Its Principle and Potential for Application to Various Materials

TAKAHASHI Makoto

NEW GLASS　Vol. 25　No. 3　p. 7-12　2010/09

Anodically-bonded Interface of Zr-based metallic glass to various silicate glass

TAKAHASHI Makoto, WATATANI Yuki, IKEUCHI Kenji, KIMURA Hisamichi, INOUE Akihisa

Preprints of the National Meeting of JWS　Vol. 86　p. 96-97　2010/03/29

Wear characteristics of surface-hybrid-MMCs layer fabricated on aluminum plate by friction stir processing

Essam R.I. Mahmoud, Makoto Takahashi, Toshiya Shibayanagi, Kenji Ikeuchi

Wear　Vol. 268　No. 9-10　p. 1111-1121　2010/03/25　Research paper (scientific journal)

Friction stir spot welding of aluminium to steel by rotating tool without probe

Kinya Aota, Makoto Takahashi, Kenji Ikeuchi

Welding International　Vol. 24　No. 2　p. 96-104　2010　Research paper (scientific journal)

Anodic Bonding of Zirconium-based Metallic Glass

TAKAHASHI Makoto, IKEUCHI Kenji, KIMURA Hisamichi, INOUE Akihisa

Trans. JWRI　Vol. 38　No. 2　p. 25-29　2009/12　Research paper (bulletin of university, research institution)

Microstructures of Inconel 718 alloy subjected to rapid thermal and stress cycle - joint performance and its controlling factors in friction welding of Inconel 718 alloy

Hongjie Wang, Kenji Ikeuchi, Makoto Takahashi, Akio Ikeda

Welding International　Vol. 23　No. 9　p. 662-669　2009/09　Research paper (scientific journal)

Joint strength of Inconel 718 alloy and its improvement by post-weld heat treatment - joint performance and its controlling factors in friction welding of Inconel 718 alloy

Hongjie Wang, Kenji Ikeuchi, Masatoshi Aritoshi, Makoto Takahashi, Akio Ikeda

Welding International　Vol. 23　No. 9　p. 679-686　2009/09　Research paper (scientific journal)

Microstructures forming in friction welding of Inconel 718 alloy - joint performance and its controlling factors in friction welding of Inconel 718 alloy

Hongjie Wang, Kenji Ikeuchi, Masatoshi Aritoshi, Makoto Takahashi, Akio Ikeda

Welding International　Vol. 23　No. 9　p. 670-678　2009/09　Research paper (scientific journal)

Fabrication of surface-hybrid-MMCs layer on aluminum plate by friction stir processing and its wear characteristics

Essam R.I. Mahmoud, Makoto Takahashi, Toshiya Shibayanagi, Kenji Dceuchi

Materials Transactions　Vol. 50　No. 7　p. 1824-1831　2009/07　Research paper (international conference proceedings)

Effect of friction stir processing tool probe on fabrication of SiC particle reinforced composite on aluminium surface

E.R.I. Mahmoud, M. Takahashi, T. Shibayanagi, K. Ikeuchi

Science and Technology of Welding and Joining　Vol. 14　No. 5　p. 713-725　2009/06　Research paper (scientific journal)

Anodic Bonding of Zr-based Metallic Glass

Takahashi Makoto, Ikeuchi Kenji

Preprints of the National Meeting of JWS　Vol. 2009　p. 108-108　2009

Anodic bonding of silicon carbide to borosilicate glass

Makoto Takahashi, Yukiyasu Aori, Kenji Ikeuchi

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 27　No. 2　p. 192s-195s　2009　Research paper (scientific journal)

Effect of Halogenation Treatment to Solder on Anodic Soldering

TAKAHASHI Makoto, IKEUCHI Kenji

Trans. JWRI　Vol. 37　No. 1　p. 39-43　2008/09　Research paper (bulletin of university, research institution)

Friction Stir Spot Welding of Aluminum to Steel by Rotating Tool without Probe

AOTA Kinya, TAKAHASHI Makoto, Ikeuchi Kenji

Quarterly J. Japan Welding Soc.　Vol. 26　No. 3　p. 227-234　2008/08　Research paper (scientific journal)

Fabrication of SiC Particle Reinforced Composite on Aluminum Surface by Friction Stir Processing

E.R.I. Mahmoud, K. Ikeuchi, M. Takahashi

Science and Technology of Welding and Joining　Vol. 13　No. 7　p. 607-618　2008/07　Research paper (scientific journal)

Effects of C Content on Intermetallic Compound Layer and Joint Strength in Friction Welding of Al Alloy to Steel

K. Ikeuchi, M. Takahashi, M. Aritoshi

61st Annual Assembly of IIW　2008/07　Research paper (international conference proceedings)

Joint Strength of Friction-welded Inconel 718 Alloy and its Improvement by Post Weld Heat Treatment - Joint performance and its controlling factors in Friction Welding of Inconel 718 Alloy -

Hongjie WANG, Kenji IKEUCHI, Masatoshi ARITOSHI, Makoto TAKAHASHI, Akio IKEDA

Quarterly J. Japan Welding Soc.　Vol. 26　No. 2　p. 167-173　2008/06　Research paper (scientific journal)

Microstructures Forming in Friction Welding of Inconel 718 Alloy - Joint performance and its controlling factors in Friction Welding of Inconel 718 Alloy -

Hongjie WANG, Kenji IKEUCHI, Masatoshi ARITOSHI, Makoto TAKAHASHI, Akio IKEDA

Quarterly J. Japan Welding Soc.　Vol. 26　No. 2　p. 159-166　2008/06　Research paper (scientific journal)

Microstructures of Inconel 718 Alloy Subjected to Rapid Thermal and Stress Cycle - Joint performance and its controlling factors in Friction Welding of Inconel 718 Alloy -

Hongjie WANG, Kenji IKEUCHI, Makoto TAKAHASHI, Akio IKEDA

Quarterly J. Japan Welding Soc.　Vol. 26　No. 2　p. 152-158　2008/06　Research paper (scientific journal)

Behavior of Superficial Oxide at Diffusion-bonded Interface of Tin and Its Influence on Bond Strength

Shinji Koyama, Makoto Takahashi, Kenji Ikeuchi

Characterization and Control of Interfaces for High Quality Advanced Materials II: Ceramic Transactions　Vol. 198　p. 461-466　2007/07　Research paper (scientific journal)

Solid State Joining Process(2006 Trend of Welding & Joining in Japan)

TAKAHASHI Makoto, YASUYAMA Masanori, KIMURA Masaaki

Journal of the Japan Welding Society　Vol. 76　No. 5　p. 360-366　2007/07

ニッケル其合金Inconel718 の摩擦圧接部における形成組織

王 洪杰, 高橋 誠, 池内 建二

第188回溶接学会溶接冶金研究委員会　2007/05　Research paper (other academic)

アルカリ金属を銀，銅で置換したガラスの陽極接合継手の組織と強度

高橋 誠, 池内 建二

第75回溶接学会界面接合研究委員会　2007/05　Research paper (other academic)

摩擦攪拌作用を利用したアルミニウムと炭素鋼のスポット接合

青田 欣也, 高橋 誠, 池内 建二

第75回溶接学会界面接合研究委員会　2007/05　Research paper (other academic)

Effects of Intermetallic Compound Layer on Bond Strength of Friction-Bonded Interface of Alloys to Steels

K.Ikeuchi, M.Takahashi, N.Yamamoto, T.Morita, H.Watanabe

The 2nd Int. Conf. on Welding and Joining of Materials　No. CD-ROM　p. 1-8　2007/05　Research paper (international conference proceedings)

Effects of Alloying Elements on Intermetallic Compound Layer in Friction Bonding of Alloy to Steel

K.Ikeuchi, M.Takahashi, N.Yamamoto, T.Morita, H.Watanabe

Acta Metallurgica Slovaca　Vol. 13　No. 1　p. 58-66　2007/05　Research paper (international conference proceedings)

Formation of Intermetallic Compounds in Friction Bonding of Al alloys to Steel

Naotugu Yamamoto, Makoto Takahashi, Masatoshi Aritoshi, Kenji Ikeuchi

Materials Science Forum　Vol. 539-543　p. 3865-3871　2007/01　Research paper (scientific journal)

Behavior of Oxide Film in Transient-Liquid-Phase Bonding of Tin with Filler of Bismuth Film

Shinji Koyama, Makoto Takahashi, Kenji Ikeuchi

Materials Science Forum　Vol. 539-543　p. 3503-3507　2007/01　Research paper (scientific journal)

Anodic Bonding of Ag-impregnated Glass and Reaction of Derived Joints to Reverse Voltage

Makoto Takahashi, Kenji Ikeuchi

Materials Science Forum　Vol. 539-543　p. 3931-3984　2007/01　Research paper (scientific journal)

Effect of Microsturucture on Hydrogen Embrittlement Susceptibility of Multi Pass Weld Metal for HT780 Steel

Yoshihiko Kitagwa, Makoto Takahashi, Kenji Ikeuchi, Toshio Kuroda, Yukinobu Matsuhita, Kazuyuki Suenagaj, Takeshi Hidaka, Hideaki Takauchi

Proceedings of National Symposium on Welding Mechanics and Design 2006　p. 483-486　2006/11　Research paper (other academic)

Electrostatically Induced Precipitation of Silver in Silver-impregnated Glass Anodically-bonded to Silicon

TAKAHASHI Makoto, IKEUCHI Kenji

Proceedings of 2 International Conference on Segregation & Precipitation, 06　p. 1(CD)-8　2006/10　Research paper (international conference proceedings)

Effects of Surface Treatments on Oxide Film of Tin during Diffusion Bonding

KOYAMA Shinji, TAKAHASHI Makoto, IKEUCHI Kenji

Proceedings of Joint Symposium of Korea/Japan Welding Metallurgy Committee, 2006　p. 334-337　2006/10　Research paper (international conference proceedings)

Nanoindentation Hardness Test for Estimation of Vickers Hardness

KATO Hiroshi, TAKAHASHI Makoto, IKEUCHI Kenji

Trans. JWRI　Vol. 35　No. 1　p. 57-61　2006/09　Research paper (bulletin of university, research institution)

アルミニウム合金と鉄鋼との摩擦圧接界面の組織と強度特性

山本 尚嗣, 高橋 誠, 池内 建二

（社）軽金属学会 研究部会報告書　2006/09

電圧印加による銀含浸ガラス陽極接合継手中の銀析出物の成長

高橋 誠

（社）溶接学会 第185回溶接冶金研究委員会　2006/08　Research paper (other academic)

Effect of Interfacial Reaction Layer on Bond Strength of Friction-bonded Joint of Al Alloy to Steel

K. Ikeuchi, N. Yamamoto, M. Takahashi, M. Aritoshi

59th Annual Assembly of Int. Inst. Welding (IIW)　2006/08　Research paper (international conference proceedings)

Effects of Halogenations Treatments on Superficial Oxide Films on the Solid -State Diffusion-Bonded Interface of Tin

Shinji Koyama, Makoto Takahashi, Kenji Ikeuchi

J. Japan Inst. Metals　Vol. 70　No. 5　p. 402-411　2006/05　Research paper (scientific journal)

アルミニウム合金／軟鋼摩擦圧接継手の界面組織と性能に対する合金元素の影響

高橋 誠

（社）溶接学会 第72回界面接合研究委員会　2006/05　Research paper (other academic)

Anodic Bonding of Glass to Metal through Migration of Ag Ions

M. Takahashi, K. Ikeuchi

Proceedings of the 3rd International Brazing and Soldering Conference　p. 60-66　2006/04　Research paper (international conference proceedings)

Effect of reverse voltage on metal/glass anodically-bonded interface

M. Takahashi, H. Yasuda, K. Ikeuchi

Welding in the World　Vol. 50　No. 1-2　p. 16-21　2006　Research paper (scientific journal)

Mechanical Properties of Bulk Sintered Titanium Nitride Ceramics

H. Kuwahara, N. Mazaki, M. Takahashi, T. Watanabe, X. Yang, T. Aizawa

Materials Science and Engineering　Vol. A319　p. 687-691　2005/12　Research paper (scientific journal)

Effect of intermetallic compound layer on bond strength of friction-welded interface of commercially pure aluminum to mild steel

Naotsugu Yamamoto, Makoto Takahashi, Masatoshi Aritoshi, Kenji Ikeuchi

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 23　No. 4　p. 622-627　2005/11　Research paper (scientific journal)

Formation of cleavage facet in brittle fracture for duplex stainless steel weldment

Toshio Kuroda, Kenji Ikeuchi, Makoto Takahashi, Yoshihiko Kitagawa

Zairyo/Journal of the Society of Materials Science, Japan　Vol. 54　No. 9　p. 935-939　2005/09　Research paper (scientific journal)

Tiインサート金属を用いた炭化ケイ素と無酸素銅との摩擦圧接継手の界面構造

西本 明生, 安藤 正昭, 高橋 誠, 有年 雅敏, 赤松 勝也, 池内 建二

日本金属学会誌　Vol. 67　p. 538-546　2005/09　Research paper (scientific journal)

Fe-Rh合金のマルテンサイト内部組織観察

高原 範久, 高橋 誠, 大嶋 隆一郎

日本金属学会誌　Vol. 67　p. 538-546　2005/09

Effect of Interfacial Reaction Layer on Bond Strength of Friction-Bonded Joint of Al Alloys to Steel

IKEUCHI Kenji, YAMAMOTO Naotsugu, TAKAHASHI Makoto, ARITOSHI Masatoshi

Transaction of JWRI　Vol. 34　No. 1　p. 1-10　2005/09　Research paper (bulletin of university, research institution)

Effect of interfacial layer on bond strength of friction-welded interface of Al-Mg5083 alloy to mild steel

Naotsugu Yamamoto, Makoto Takahashi, Masatoshi Aritoshi, Kenji Ikeuchi

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 23　No. 3　p. 496-503　2005/08　Research paper (scientific journal)

Interfacial Layers in Solid-state Bonding of Al Alloys to Steel

K. Ikeuchi, N. Yamamoto, M. Takahashi, M. Aritoshi

Proceedings of Inter-University Research Seminar (IURS) on Science and Technology of Welding and Joining　p. 190-202　2005/08　Research paper (international conference proceedings)

Friction stir welded lap joints of Aluminum to Zinc coated steel

A. Elrefaey, M. Takahashi, K. Ikeuchi

58th Annual Assembly and International Conference of International Institute of Welding　2005/07　Research paper (international conference proceedings)

Microstructures of Gas Metal Arc Weld Metal of 950 MPa Class Steel

M. Gouda, M. Takahashi, K. Ikeuchi

Science and Technology of Welding and Jining　Vol. 10　No. 3　p. 369-377　2005/05　Research paper (scientific journal)

Impact Fracture Behavior of Duplex Stainless Steel Weldment

Y. Kitagawa, T. Kuroda, M. Takahashi, K. Ikeuchi

Proc. 30th Anniversary Inter. Symposium on Joining and Welding Solution to Industrial Innovation, Osaka　p. 201-202　2005/03　Research paper (international conference proceedings)

Development of Microstructure of Anodically-bonded Interface between Aluminum and Borosilicate glass

M. Takahashi, K. Ikeuchi

Proc. 30th Anniversary Inter. Symposium on Joining and Welding Solution to Industrial Innovation, Osaka　p. 197-200　2005/03　Research paper (international conference proceedings)

Microstructure and Mechanical Properties of Weld Metals of 950 MPa Class High Strength Steel

M. Takahashi, M. Gouda, T. Kuroda, K. Ikeuchi

Proc. 30th Anniversary Inter. Symposium on Joining and Welding Solution to Industrial Innovation, Osaka　p. 195-196　2005/03　Research paper (international conference proceedings)

Effects of Alloying Elements on Strength of Friction-bonded Interfaces of Al Alloys to Steel

N. Yamamoto, M. Takahashi, K. Ikeuchi

Proc. 30th Anniversary Inter. Symposium on Joining and Welding Solution to Industrial Innovation, Osaka　p. 203-206　2005/03　Research paper (international conference proceedings)

Influence of Surface Treatment on Strength on Solid-State Diffusion-Bonded Interface of Tin

S. Koyama, M. Takahashi, K. Ikeuchi

Proc. 30th Anniversary Inter. Symposium on Joining and Welding Solution to Industrial Innovation, Osaka　p. 207-208　2005/03　Research paper (international conference proceedings)

Characterization of aluminum/steel lap joint by friction stir welding

A. Elrefaey, M. Gouda, M. Takahashi, K. Ikeuchi

Journal of Materials Engineering and Performance　Vol. 14　No. 1　p. 10-17　2005/02　Research paper (scientific journal)

Characterization of friction-stir-welded lap joints of aluminum to steel

A. Elrefaey, M. Takahashi, and K. Ikeuchi

Journal of Materials Engineering and Performance　Vol. 14　No. 1　p. 10-17　2005/02　Research paper (scientific journal)

Preliminary investigation of friction stir welding aluminium/copper lap joints

A. Elrefaey, M. Takahashi, K. Ikeuchi

Welding in the World　Vol. 49　No. 3-4　p. 93-101　2005　Research paper (international conference proceedings)

Effect of intermetallic compound layer on bond strength of friction-welded interface of Al-Mg5052 alloy to mild steel

Naotsugu Yamamoto, Makoto Takahashi, Masatoshi Aritoshi, Kenji Ikeuchi

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 23　No. 2　p. 352-358　2005　Research paper (scientific journal)

Friction-stir-welded lap joint of aluminum to zinc-coated steel

Ahmed Elrefaey, Makoto Takahashi, Kenji Ikeuchi

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society　Vol. 23　No. 2　p. 186-193　2005　Research paper (scientific journal)

Disjunction of Metal/Glass Anodically-bonded Interface by Application of Reverse Voltage

M. Takahashi, H. Yasuda, K. Ikeuchi

Transaction of JWRI　Vol. 33　No. 1　p. 25-32　2004/10　Research paper (bulletin of university, research institution)

Microstructure of Aluminum/Copper Lap Joint by Friction Stir Welding and its Performance

Ahmed ELREFAEY, Makoto Takahashi, Kenji Ikeuchi

Journal of High Temperature Society of Japan　Vol. 30　No. 5　p. 286-292　2004/09　Research paper (scientific journal)

Interfacial reaction in anodically bonded joints during receiving reverse voltage

Makoto Takahashi, Hiroki Yasuda, Kenji Ikeuchi

Solid State Ionics　Vol. 172　No. 1-4　p. 335-340　2004/08/31　Research paper (international conference proceedings)

Influence of Surface Treatment on Interfacial Microstructure and Bond Strength of Diffusion-bonded Tin

Shinji Koyama, Makoto Takahashi, Kenji Ikeuchi

Solid State Ionics　No. 172　p. 397-401　2004/08　Research paper (scientific journal)

Effects of Reverse Voltage on Metal/Glass Anodically-Bonded Interface

M. Takahashi, H. Yasuda, K. Ikeuchi

57th Annual Assembly of Int. Inst. Welding　2004/07　Research paper (international conference proceedings)

Effects of Interfacial Microstructure on Friction-Bonded Strength of Low Carbon Steel to Al-Mg Alloy (AA5083)

N. Yamamoto, M. Takahashi, M. Aritoshi, K. Ikeuchi

57th Annual Assembly of Int. Inst. Welding　2004/07　Research paper (international conference proceedings)

Performance of Aluminum/Copper Lap Joints by Friction Stir Welding

A. Elrefaey, M. Takahashi, K. Ikeuchi

57th Annual Assembly of Int. Inst. Welding　2004/07　Research paper (international conference proceedings)

Gleeble Simulation of Mirostructure Development during Repair Welding in SQV2A Pressure Vessel Steel

P. Brziak, R. Mizuno, F. Matsuda, K. Ikeuchi, M. Takahashi

Acta Metallurgica Slovakia　Vol. 10　No. Special issue　p. 363-368　2004/04　Research paper (international conference proceedings)

Disjunction of Anodically-bonded Metal/Glass Interface by Application of Reverse Voltage

M. Takahashi, H. Yasuda, K. Ikeuchi

Acta Metallurgica Slovakia　Vol. 10　No. Special issue　p. 347-351　2004/04　Research paper (international conference proceedings)

Mechanical Properties of Si3N4/Cu Joint Friction-Bonded with Intermedicate Layer of Niobiam and Titanium

M. Ando, K, Ikeuchi, M. Takahashi, M. Aritoshi

Acta Metallurgica Slovakia　Vol. 10　No. Special issue　p. 341-346　2004/04　Research paper (international conference proceedings)

Behavior of Superficial Oxide Film at Solid-Stae Diffusion Bonded Interface of Tin and its Influence on Bond Strength

Shinji Koyama, Makoto Takahashi, Kenji Ikeuchi

Acta Metallurgica Slovakia　Vol. 10　No. Special issue　p. 75-82　2004/04　Research paper (international conference proceedings)

Interfacial Layer in Friction-Bonded Joint of Low Carbon Steel to Al-Mg Alloy (AA5083) and its Influence on Bond Strength

Naotsugu Yamamoto, Makoto Takahashi, Kenji Ikeuchi

Materials Transaction, JIM　Vol. 45　No. 2　p. 296-299　2004/02　Research paper (scientific journal)

Behavior of Superficial Oxide Film at Solid-Stae Diffusion Bonded Interface of Tin

Shinji Koyama, Makoto Takahashi, Kenji Ikeuchi

Materials Transaction, JIM　Vol. 45　No. 2　p. 300-302　2004/02　Research paper (scientific journal)

Interfacial Microstructure and Bond Strength of Friction-Bonded Joint of Al Alloys to Mild Steel

N. Yamamoto, M. Takahashi, T. Fukunaga, K. Ikeuchi, M. Fujita

56th Annual Meeting of the Inter. Institute of Welding, Bucharest, Romania, (2003.7.6-11)IX-2060-03.　2003/04　Research paper (international conference proceedings)

Weld Toughness and Microstructures of Duplex Stainless Steel by Three-dimensional Fractography

Toshio Kuroda, Kenji Ikeuchi, Makoto Takahashi, Yoshihiko Kitagawa

Proceeding of the International Conference on Designing Interfacial Structures in Advanced Materials and their Joints (DIS'02)　p. 396-401　2002/11　Research paper (international conference proceedings)

Glass/Al Interfacial Reaction Induced by Application of DC Voltage

M. Takahashi, K. Ikeuchi

Proceedings of the International Conference on Designing of Interfacial Structures in Advanced Materials and their Joints　p. 551-558　2002/11　Research paper (international conference proceedings)

Influence of Microstructures on Mechanical Properties of Super Duplex Stainless Steel Weldments

T.Kuroda, K.Ikeuchi, M.Takahashi, Y.Kitagawa

IIW Asian Pacific Int. Congress　2002/10　Research paper (international conference proceedings)

ANODICALLY-BONDED INTERFACE OF GLASS TO ALUMINUM

M. Takahashi, Satoru Nishikawa, Zheng Chen, K. Ikeuchi

IWC-Korea 2002　2002/10　Research paper (international conference proceedings)

Effects of GMA Welding Parameters on Properties and Microstructures of Weld Metal of 950 MPa Class Steel

M. A. Gouda, M. Takahashi, K. Ikeuchi, T. Kuroda

7th Inter-University Research Seminar, Materials Science, Welding, Joining and Allied Processes, Bratislava, Slovakia　2002/06　Research paper (international conference proceedings)

Influences of Heat Input and Shielding Gas Composition on Microstructure and Properties of Weld Metal of 950 MPa Class High Strength Steel

M. A. Gouda, M. Takahashi, T. Kuroda, K. Ikeuchi

55th Annual Assembly of IIW, Copenhagen, Denmark, IIW Doc, IX-2023-02　2002/04　Research paper (international conference proceedings)

Friction-Bonded Interfaces of Al-Mg Alloy to Steels

M. Takahashi, T. Fukunaga, K. Ikeuchi, M. Fujita

6th International Conference on Trends in Welding Research, Pine Mountain　2002/04　Research paper (international conference proceedings)

Microstructure of Glass/Metal Interface in Anodically-Bonded Joint

M. Takahashi, K. Ikeuchi

Joining of Advanced and Specialty Materials IV　2002/04　Research paper (international conference proceedings)

Debonding of Anodically-bonded Joint by Application of Opposite Polarity

M. Takahashi, Satoru Nishikawa, K. Ikeuchi

Proceedings of the 7th International Symposium of Japan Welding Society　Vol. Vol. 2　p. 851-856　2001/11　Research paper (international conference proceedings)

Microstructures of GMA Weld Metal of 950 MPa Class Steel

M. Gouda, M. Takahashi, T. Kuroda, K. Ikeuchi

Proceedings of the 7th International Symposium of Japan Welding Society　Vol. Vol. 2　p. 815-820　2001/11　Research paper (international conference proceedings)

Effect of Simulated Welding Cycles on Carbide Evolution in SQV-2A Low Alloy Steel

J. Janovec, M. Takahashi, T. Kuroda, K. Ikeuchi

Transaction of JWRI　Vol. 30　No. 1　p. 85-90　2001/08　Research paper (bulletin of university, research institution)

Interfacial Microstructure in Friction-Bonded Joint of Al-Mg Alloy to Steels

M. Takahashi, T. Fukunaga, K. Ikeuchi, M. Fujita

Proceedings of Symposium on Metal, Casting and Welding, Seoul, Korea, 21　2001/04　Research paper (international conference proceedings)

Effect of Simulated Welding Cycles on Microstructure Changes in 1.5Mn-0.5Mo Low Alloy Steel

J. Janovec, M. Takahashi, T. Kuroda, K. Ikeuchi

Acta Metallurgica Slovaca, pp.200-204　p. 205-209　2001/04　Research paper (international conference proceedings)

Microstructure of Joint Interface in Anodic-bonded Glass/metal Interfaces

M. Takahashi, K. Ikeuchi

Acta Metallurgica Slovaca　p. 200-204　2001/04　Research paper (international conference proceedings)

Microsenuctunal and Mechanical Aspects of Tempered ICCGHAZ of SQV-2A Low Alloy Steel Weld

J. Janovec, M. Takahashi, T. Kuroda, K. Ikeuchi

ISIJ International　Vol. 40/Supl.　p. S44-S48　2000/12　Research paper (scientific journal)

Fractographic and Micorstructural Aspects of Tempered ICCGHAZ of SQV-2A Low Alloy Steel Weld

J. Janovec, M. Takahashi, T. KURODA ands K. Ikeuchi

Proceedings of the International Conference FT\RACTOGRAPHY 2000　2000/10　Research paper (international conference proceedings)

Formation of Interfacial Reaction Layer in Ceramics/Metal Joint Friction-Bonded with Intermediate Layer of Active Metal

A. NISHIMOTO, M. ANDO, M. ARITOSHI, M. Takahashi, K. Ikeuchi

Joining of Advanced and Specialty Materials II　p. 79-87　2000/04　Research paper (international conference proceedings)

Precursors of Thermoelastic Fcc-Fct Martensite Transformation of Fe3Pt alloys

R. Oshima, S. Muto, and M. Takahashi

Materials Science Forum　Vol. 327　No. 3　p. 445-448　2000/03　Research paper (scientific journal)

Friction bonding of silicon carbide to oxygen-free copper with an intermediate layer of reactive metal

Akio Nishimoto, Masaaki Ando, Makoto Takahashi, Masatoshi Aritoshi, Kenji Ikeuchi

Materials Transactions, JIM　Vol. 41　No. 12　p. 1636-1645　2000　Research paper (scientific journal)

ガラス/金属陽極接合体の界面特性に及ぼす逆電圧印加の影響

溶接学会第55回界面接合研究委員会資料　2000

ガラスと各種金属との陽極接合

溶接学会 第52回界面接合研究委員会資料　2000

Effects of Application of opposite polarity on the Properties Bend Interface in Glass/Metal Anodically-bonded Joint

The Japan Welding Society : Abstracts for the 55th Committee Meeting on Interfacial Joining Research　2000

Anodic Bonding of Glass to Various Metals

The Japan Welding Society : Abstracts for the 52th Committee Meeting on Interfacial Joining Research　2000

Friction bonding of silicon carbide to oxygen free copper with an intermediate layer of reactive metal

A Nishimoto, M Ando, M Takahashi, M Aritoshi, K Ikeuchi

JOURNAL OF THE JAPAN INSTITUTE OF METALS　Vol. 63　No. 7　p. 895-904　1999/07　Research paper (scientific journal)

Interfacial reaction layers in SiC/Cu joint friction-bonded with Nb intermediate layer

Akio Nishimoto, Masaaki Ando, Makoto Takahashi, Masatoshi Aritoshi, Kenji Ikeuchi

Materials Transactions, JIM　Vol. 40　No. 9　p. 953-956　1999　Research paper (scientific journal)

Microstructure and Bond Strength of Ceramics/Metal Interface by Friction Banding

A. Nishimoto, M. Ando, M. Takahashi, T. Kuroda, K. Ikeuchi

International Symposium on Environment-Consious Innovative Meterials Processing with Advanced Energy Sources(ECOMAP-98)　p. 418-423　1998/11　Research paper (international conference proceedings)

Spark-Sintered W Alloys doped with LaB6

M. Takahashi, M. Tanaka, T. Shirai, K. Ikeuchi, M. USHIO

Transaction of JWRI　Vol. 27　No. 1　p. 47-56　1998/08　Research paper (bulletin of university, research institution)

Preparation of TEM Specimens from Joint Interfaces

M. Takahashi

Journal of Japan Welding Society　Vol. 67　No. 3　p. 12-15　1998/04

Microstructure of Glass/Metal Interface of Anodically-Bonded Joint

M. A. Morsy, K. Ikeuchi, M. Takahashi, M. Ushio

ASM Proceedings of the International Conference: Trends in Welding Research　p. 251-256　1998　Research paper (international conference proceedings)

LaB₆粒子分散W合金の放電焼結(共著)

溶接学会第152回溶接冶金研究委員会資料WM-1680-98　1998

Preparation of TEM Specimens of Joint Interfaces

Makoto TAKAHASHI

Journal of the Japan Welding Society　Vol. 67　No. 3　p. 190-193　1998

Displacive Phase Transformations in Fe-Rh Alloys(共著)

Proceedings of International conference on displacive phase transformations and their applications in material engineering　1998

Stress Induced Phase Transition of Iron-Rhodium Alloys

M. Takahashi, R. Oshima

JOURNAL DE PHYSIQUE IV　Vol. 5　No. C8 Part 1　p. 491-496　1995/12　Research paper (scientific journal)

OBSERVATION OF INTERNAL STRUCTURES OF MARTENSITES OF FE-RH ALLOYS

N TAKAHARA, M TAKAHASHI, R OSHIMA

JOURNAL OF THE JAPAN INSTITUTE OF METALS　Vol. 59　No. 6　p. 599-606　1995/06　Research paper (scientific journal)

Annealing Effect on Phase Transition of Equiatomic Ferh Alloy

Makoto Takahashi, Ryuichiro Oshima

Materials Transactions, JIM　Vol. 36　No. 6　p. 735-742　1995　Research paper (scientific journal)

First Order Phase Transition of Fe-Rh Alloys

R. Oshima, M. Takahashi

International Conference on Martensitic Transformations(ICOMAT-92)　1993/05　Research paper (international conference proceedings)