keyword Structural and Functional Materials，Thin films，Physical Properties of Metal
京都大学大学院 工学研究科
- 1996/03
Kyoto University Graduate School, Division of Engineering
- 1996
Kyoto University Faculty of Engineering
- 1991/03
Kyoto University Faculty of Engineering
- 1991
Japan Welding Society
The Japan Institute of Metals and Materials
米国材料学会(Materials Research Society)
The Minerals, Metals & Materials Society
Nanotechnology/Materials / Metallic materials /
Nanotechnology/Materials / Structural and functional materials /
支部長特別賞
伊藤 和博 （一社）溶接学会 関西支部 2021/06
2020年度 論文賞
山本 啓, 和泉 博貴, 伊藤 和博 （一社）スマートプロセス学会 2020/11
2019年度溶接学会優秀研究発表賞
Pradeep Kumar PARCHURI, 古手川 将大, 山本 啓, 伊藤 和博 （一社）溶接学会 2019/12
Excellent Presentation Award
YAMAMOTO Hajime, DANNO Yoshikazu, ITO Kazuhiro, MIKAMI Yoshiki, FUJII Hidetoshi International Symposium on Creation of Life Innovation Materials for Interdiscriplinary and International Researcher Development Satellite (iLIM-s) 2019/11
平成30年度 界面接合研究賞
山本 啓, 段野 芳和, 今川 雄大, 伊藤 和博 （一社）溶接学会 界面接合研究委員会 2019/05
海外論文発表奨励賞
山本 啓, 段野 芳和, 伊藤 和博, 藤井英俊 （一社）生産技術振興協会 2018/10
界面接合研究奨励賞
小濱 和之, 寺田 俊一, 伊藤 和博 （一社）溶接学会 2018/05
平成２９年度溶接学会優秀研究発表賞
段野 芳和, 山本 啓, 伊藤 和博, 三上 欣希, 小濱 和之 （一社）溶接学会 2017/12
ポスター賞
吉岡 尚輝, 部家 彰, 松尾 直人, 小濱 和之, 伊藤 和博 材料物性工学談話会 2017/02
日本金属学会第25回優秀ポスター賞
小濱 和之, 伊藤 和博, 佐野 貴之, 生田目 俊秀, 大井 暁彦 （公社）日本金属学会 2015/09
大阪大学総長顕彰
伊藤 和博 大阪大学 2015/07
日本金属学会第23回優秀ポスター賞
小濱 和之, 伊藤 和博, 佐野 貴之, 生田目 俊秀, 大井 暁彦 （公社）日本金属学会 2014/09
日本金属学会第22回優秀ポスター賞
小濱 和之, 伊藤 和博, 斎藤 理史 （公社）日本金属学会 2014/03
日本金属学会第21回優秀ポスター賞
草壁 史, 丸山 裕樹, 部家 彰, 松尾 直人, 神田 一浩, 望月 孝晏, 伊藤 和博, 高橋 誠 （公社）日本金属学会 2013/09
Best Poster Presentation
K. Ito, K. Hamasaka, Y. Hayakawa, Y. Shirai, M. Murakami The 3rd International Symposium on Advanced Materials Development and Integration of Novel Structural Metallic and Inorganic Materials (AMDI-3) 2012/11
日本金属学会功績賞
伊藤 和博 （社）日本金属学会 2012/03
日本金属学会第17回優秀ポスター賞
伊藤 和博 （社）日本金属学会 2011/11
日本金属学会第11回優秀ポスター賞
伊藤 和博 （社）日本金属学会 2008/09
日本金属学会村上奨励賞
伊藤 和博 （社）日本金属学会 2007/10
日本金属学会第7回優秀ポスター賞
伊藤 和博 （社）日本金属学会 2006/09
TMS'03 Annual Meeting 最優秀ポスター賞
伊藤 和博 TMS 2003/03
本多記念研究奨励賞
伊藤 和博 （財）本多記念会 2000/05
日本金属学会奨励賞
伊藤 和博 （社）日本金属学会 1998/09
第117回日本金属学会(ホノルル)最優秀ポスター論文賞
伊藤 和博 （社）日本金属学会 1995/12
Improved mechanical properties of Al0.3CoCrFeNiTi0.15 high entropy alloy by coexistence of cellular segregation and precipitation
Yao Lu, Hongwei Du, Xiaocen Ding, Qingsong Shu, Bingbing Zhao, Xianping Dong, Lanting Zhang, Kazuhiro Ito
Materials Characterization Vol. 220 2024/12/25 Research paper (scientific journal)
Publisher: Elsevier
Compressive residual stress applied to a low-carbon steel surface alloyed with WC tool constituent elements according to friction stir processing
Hajime Yamamoto, Yuji Yamamoto, Kazuhiro Ito, Yoshiki Mikami
Materials & Design Vol. 244 p. 113225-113225 2024/08 Research paper (scientific journal)
Publisher: Elsevier BV
Flux Enhancement with Titanium or Vanadium Oxides Addition for Superior Submerged Arc Welding of HSLA Steel Plates
Majid Malekinia, Habib Hamed Zargari, Kazuhiro Ito, Syamak Hossein Nedjad
Journal of Advanced Joining Processes 2024/07 Research paper (scientific journal)
Publisher: Elsevier
Medium-carbon dual-phase steels with spheroidized ferrite matrix
Ali Siyahtiri, Syamak Hossein Nedjad, Habib Hamed Zargari, Kazuhiro Ito
Journal of Materials Research and Technology Vol. 30 p. 4692-4701 2024/04 Research paper (scientific journal)
Publisher: Elsevier
Effect of workpiece vibration frequency on heat distribution and material flow in the molten pool in tandem-pulsed gas metal arc welding
Habib Hamed Zargari, Kazuhiro Ito, Abhay Sharma
The International Journal of Advanced Manufacturing Technology Vol. 129 p. 2507-2522 2023/10 Research paper (scientific journal)
Strengthening of Al/Cu dissimilar joint due to complicated interface produced by pulsed TIG welding with a constricted nozzle
Hajime Yamamoto, Yusuke Yanagi, Kazuhiro Ito, Hisaya Komen, Manabu Tanaka, Akihisa Murata
Welding International Vol. in press 2023/07 Research paper (scientific journal)
Low-temperature Toughness Increase for Austenitic Stainless Steel Weld Metal for Cryogenic Use
Hirofumi Maniwa, Mayumi Abe, Masamichi Suzuki, Yoshihiko Kitagawa, Yusuke Hoshino, Reika Oda, Hajime Yamamoto, Seong Min Hong, Kazuhiro Ito
IIW-II-A, Annual Assembly 2023 2023/07 Research paper (international conference proceedings)
Adapted to generate compressive residual stress and retained austenite in a steel surface layer by friction stir processing with the WC tool
Hajime Yamamoto, Yuji Yamamoto, Kazuhiro Ito, Yoshiki Mikami
IIW-XI-L, Annual Assembly 2023 2023/07 Research paper (international conference proceedings)
Strengthening of Al/Cu dissimilar joint due to complicated interface produced by pulsed TIG welding with a constricted nozzle
Hajime YAMAMOTO, Yusuke YANAGI, Kazuhiro ITO, Hisaya KOMEN, Manabu TANAKA, Akihisa MURATA
QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 41 No. 1 p. 168-177 2023 Research paper (scientific journal)
Publisher: Japan Welding Society
Orientation dependence of plastic deformation of sintered Nd-Fe-B magnets at high temperature
Mei Liu, Lanting Zhang, Bingbing Zhao, Fugang Chen, Xianshuang Xia, Yuyong Jiang, Hajime Yamamoto, Kazuhiro Ito
Acta Materialia Vol. 244 2023/01 Research paper (scientific journal)
溶接・接合機構を詳細にみるー4つの事例ー
伊藤 和博
生産と技術 Vol. 74 No. 4 2022/06
Experimental study on improving the additively manufactured GMAW and TIG beads using FSP
Murshid Imam, Sai Naga Sri Harsha Chittajallu, Himanshu Gururani, Hajime Yamamoto, Kazuhiro Ito, Pradeep Kumar Parchuri, Rajnish Mishra, Abhay Sharma, Ashutosh Richhariya, Viswanath Chinthapent
Materials Today: Proceedings Vol. 56 p. 690-705 2022/01 Research paper (international conference proceedings)
Publisher: Elsevier
Fatigue strength improvement due to alloying steel weld toes with WC tool constituent elements through friction stir processing
Hajime Yamamoto, Shodai Koga, Kazuhiro Ito, Yoshiki Mikami
The International Journal of Advanced Manufacturing Technology Vol. 119 No. 9-10 p. 6203-6213 2022/01 Research paper (scientific journal)
Publisher: Springer
Microstructure Features and Formation Mechanism in a Newly Developed Electroslag Welding
Tomonori KAKIZAKI, Shodai KOGA, Hajime YAMAMOTO, Yoshiki MIKAMI, Kazuhiro ITO, Kei YAMAZAKI, Shuji SASAKURA, Hirohisa WATANABE
Welding in the World Vol. 66 No. 2 p. 313-324 2021/11 Research paper (scientific journal)
Publisher: Springer
Alloying a topmost steel-plate layer with WC-tool constituent elements during friction stir processing
Hajime Yamamoto, Yudai Imagawa, Kazuhiro Ito, Ke Chen, Lanting Zhang
Journal of Manufacturing Processes Vol. 69 p. 311-319 2021/08 Research paper (scientific journal)
Publisher: Elsevier
Feature of microstructure and its formation mechanism in a newly developed electro slag welding
Tomonori Kakizaki, Shodai Koga, Hajime Yamamoto, Yoshiki Mikami, Kazuhiro Ito, Kei Yamazaki, Shuji Sasakura, Hirohisa Watanabe
Proceedings of The 74th IIW on-line Assembly & International Conference Vol. IX-L-1237-2021 2021/07 Research paper (international conference proceedings)
Microstructure evolution along build direction for thin-wall components fabricated with wire-direct energy deposition
Janmejay Dattatraya Kulkarni, Suresh Babu Goka, Pradeep Kumar Parchuri, Hajime Yamamoto, Kazuhiro Ito, Suryakumar Simhambhatla
Rapid Prototyping Journal Vol. 27 No. 7 p. 1289-1301 2021/07 Research paper (scientific journal)
Publisher: Emerald Insight
Characterization of Shock Wave Damages in Explosion Welded Mo/Cu Clads
Pradeep Kumar Parchuri, Shota Kotegawa, Kazuhiro Ito, Hajime Yamamoto, Akihisa Mori, Shigeru Tanaka, Kazuyuki Hokamoto
Metals Vol. 11 No. 3 p. 501-501 2021/03 Research paper (scientific journal)
Publisher: MDPI AG
Friction stir welding of ultrahigh-purity aluminum thin sheets never to lower high conductivity at ultra-low temperature
Hajime YAMAMOTO, Yusuke AOYAMA, Kazuhiro ITO, Tetsuo YAMADA, Manabu TANAKA, Hiroaki HOSHIKAWA, Akira NAGATA, Toshiaki KUMAGAI
QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 38 No. 4 p. 253-262 2020/12 Research paper (scientific journal)
Publisher: Japan Welding Society
Numerical Simulation on Effect of Microstructure on Hydrogen-induced Cracking Behavior in Duplex Stainless Steel Weld Metal
Gen Ogita, Koki Matsumoto, Masahito Mochizuki, Yoshiki Mikami, Kazuhiro Ito
ISIJ International Vol. 61 No. 4 p. 1236-1244 2020/11 Research paper (scientific journal)
Publisher: Iron and Steel Institute of Japan
Evaluation of Hydrogen-induced Cracking Behavior in Duplex Stainless Steel by Numerical Simulationof Stress and Diffusible Hydrogen Distribution at the Microstructural Scale
Gen Ogita, Koki Matsumoto, Masahito Mochizuki, Yoshiki Mikami, Kazuhiro Ito
ISIJ International Vol. 61 No. 4 2020/11 Research paper (scientific journal)
Visualizing the vibration effect on the tandem-pulsed gas metal arc welding in the presence of surface tension active elements
H. Hamed Zargari, K. ITO, M. Kumar, A. Sharma
International Journal of Heat and Mass Transfer Vol. 161 2020/08 Research paper (scientific journal)
Publisher: Elsevier
Predicting Tensile Properties of Friction-Stir-Welded 6063 Aluminum with Experimentally Measured Welding Heat Input
Tianbo Zhao, Yutaka S. Sato, Hiroyuki Kokawa, Kazuhiro Ito
Acta Metallurgica Sinica (English Letters) Vol. 33 No. 9 p. on Line-1242 2020/07/09 Research paper (scientific journal)
Publisher: Springer Science and Business Media LLC
Metallurgical Characterization of Penetration Shape Change in Workpiece Vibration-Assisted Tandem-Pulsed Gas Metal Arc Welding
Habib Hamed Zargari, Kazuhiro Ito, Tsuyoshi Miwa, Pradeep Kumar Parchuri, Hajime Yamamoto, Abhay Sharma
Materials Vol. 13 No. 14 2020/07 Research paper (scientific journal)
Publisher: MDPI
Surface Microstructure Modifications of Low Carbon Steel Welds Produced by Low-Heat-Input Friction Stir Processing
Hajime Yamamoto, Tomohiro Nishiura, Hitomi Nishibata, Mitsuharu Yonemura, Kazuki Fujiwara, Kaori Kawano, Kazuhiro Ito
Materials Transactions Vol. 61 No. 8 p. 1613-1619 2020/07 Research paper (scientific journal)
Publisher:
Microstructure and Impact Toughness Relationship for Different Nickel Level of Electrode in Multi-pass FCA Welded SM570-TMC Steel Joint
H. Oktadinata, W. Winarto, E. S. Siradj. D. Priadi, H. R. Muslih, K. Ito
Quarterly J. Japan Welding Soc. Vol. 38 No. 2 p. 154s-158s 2020/06 Research paper (scientific journal)
Study on Residual Stress by Neutron Diffraction in SM570-TMC Welded by Flux-Cored Wires Containing Different Nickel
H. Oktadinata, W. Winarto, E. S. Siradj. D. Priadi, H. R. Muslih, K. Ito
Quarterly J. Japan Welding Soc. Vol. 38 No. 2 p. 116s-120s 2020/06 Research paper (scientific journal)
A unique CEL numerical method on material flow in a molten pool of workpiece vibration assisted welding
H. Hamed Zargari, K. Ito, Y. Mikami, A. Sharma
Quarterly J. Japan Welding Soc. Vol. 38 No. 2 p. 54s-58s 2020/06 Research paper (scientific journal)
Friction stir welding of ultra high-purity aluminium thin sheets never to lower high conductivity at ultra-low temperature
Hajime Yamamoto, Yusuke Aoyama, Kazuhiro Ito, Tetsuo Yamada, Manabu Tanaka, Hiroaki Hoshikawa, Akira Nagata, Toshiaki Kumagai
Welding International Vol. 34 No. 4-6 p. 125-137 2020 Research paper (scientific journal)
Microstructure and Mechanical Properties of Ah-36 Steel Weldment Welded using Magnesium Modified E6013 Electrode
Dewin Purnama, Winarto Winarto, Nofrijon Sofyan, Adhi Prihastomo, Kazuhiro Ito
International Journal of Technology Vol. 11 No. 1 p. 48-59 2020/01 Research paper (scientific journal)
Numerical Simulation on Effect of Microstructure on Hydrogen-induced Cracking Behavior in Duplex Stainless Steel Weld Metal
Gen Ogita, Koki Matsumoto, Masahito Mochizuki, Yoshiki Mikami, Kazuhiro Ito
Tetsu-to-Hagane Vol. 106 No. 4 2019/12 Research paper (scientific journal)
Evaluation of Hydrogen-induced Cracking Behavior in Duplex Stainless Steel by Numerical Simulationof Stress and Diffusible Hydrogen Distribution at the Microstructural Scale
Gen Ogita, Koki Matsumoto, Masahito Mochizuki, Yoshiki Mikami, Kazuhiro Ito
Tetsu-to-Hagane Vol. 106 No. 4 2019/12 Research paper (scientific journal)
TEM characterization of explosive cladding interfaces between refractory metal (group V or VI) and Cu plates
Pradeep K PARCHURI, Makoto TAKAHASHI, Kazuhiro ITO, Hajime YAMAMOTO, Kazuyuki HOKAMOTO
Journal of Smart Processing Vol. 8 No. 6 p. 261-266 2019/09 Research paper (scientific journal)
Cladding of a crack-free W plate on Cu plates using explosive welding at higher collision velocity with lower collision angle
Pradeep K Parchuri, Shota Kotegawa, Kazuhiro Ito, Hajime Yamamoto, Akihisa Mori, Shigeru Tanaka, Kazuyuki Hokamoto
Results in Materials Vol. 5 No. 100023 p. 1-7 2019/09 Research paper (scientific journal)
Influence of post-deposition annealing on characteristics of Pt/Al2O3/β-Ga2O3 MOS capacitors
Masafumi Hirose, Toshihide Nabatame, Kazuya Yuge, Erika Maeda, Akihiko Ohi, Naoki Ikeda, Yoshihiro Irokawa, Hideo Iwai, Hideyuki Yasufuku, Satoshi Kawada, Makoto Takahashi, Kazuhiro Ito, Yasuo Koide, Hajime Kiyone
Microelectronic Engineering Vol. 216 2019/08 Research paper (scientific journal)
Effect of workpiece- vibration on the penetration shape change of weld bead in P-GMA Welds
H. Hamed Zargari, K. Ito, P. K.umar Parchuri, H. Yamamoto, K. Manish, A. Sharma
The 72nd IIW Annual Assembly & International Conference 2019/07 Research paper (international conference proceedings)
Influence of post-deposition annealing on characteristics of Pt/Al2O3/β-Ga2O3 MOS capacitors
Masafumi Hirose, Toshihide Nabatame, Kazuya Yuge, Erika Maeda, Akihiko Ohi, Naoki Ikeda, Yoshihiro Irokawa, Hideo Iwai, Hideyuki Yasufuku, Satoshi Kawada, Makoto Takahashi, Kazuhiro Ito, Yasuo Koide, Hajime Kiyone
Microelectronic Engineering 2019/06 Research paper (scientific journal)
レーザ溶接によるA6061Al合金とAZ31Mg合金の異材接合
松本 幸樹, 西本 明生, 石川 武, 永塚 公彬, 伊藤 和博, 塚本 雅裕, 中田 一博
軽金属溶接協会誌 Vol. 57 No. 5 p. 26-34 2019/05 Research paper (scientific journal)
Wire arc additive manufacturing, Thermal modelling, Build direction, Mechanical properties
A. Sharma, JAYAPRAKASH SHARMA, PANCHAGNULA, Manish kumar, Kazuhiro Ito, Pradeep Kumar Parchuri, Suryakumar Simhambhatla, Santhan reddy
Journal of Manufacturing Processes Vol. 40 p. 46-58 2019/03 Research paper (scientific journal)
Benefits of intermediate-layer formation at the interface of Nb/Cu and Ta/Cu explosive clads
PradeepK. Parchuri, Shota Kotegawa, Hajime Yamamoto, Kazuhiro Ito, Akihisa Mori, Kazuyuki Hokamoto
Materials & Design Vol. 166 p. 107610-107610 2019/03 Research paper (scientific journal)
Publisher: Elsevier BV
Direct application of friction stir processing to weld toes of high-strength low-alloy steel joints
Hajime Yamamoto, Yoshikazu Danno, Kazuhiro Ito, Yoshiki Mikami, Hidetoshi Fujii
Proceedings of TMS 2019 2019/03 Research paper (international conference proceedings)
Effects of Microstructural Modification by Friction Stir Processing on Fracture Toughness of Low-carbon Steel Welds
Hajime YAMAMOTO, Hiroki IZUMI, Kazuhiro ITO
Journal of Smart Processing Vol. 8 No. 1 p. 29-35 2019 Research paper (scientific journal)
Publisher: Sumart Processing Society for Minerals, Environment and Energy
Weld toe modification using spherical-tip WC tool FSP in fatigue strength improvement of high-strength low-alloy steel joints
Hajime Yamamoto, Yoshikazu Danno, Kazuhiro Ito, Yoshiki Mikami, Hidetoshi Fujii
Materials & Design Vol. 160 p. 1019-1028 2018/12 Research paper (scientific journal)
Publisher: Elsevier BV
Advantages of intermediate-layer formation at the interface of Nb/Cu and Ta/Cu explosive clads over a wavy interface
Pradeep K Parchuri, Shota Kotegawa, Hajime Yamamoto, Kazuhiro Ito, Akihisa Mori, Kazuyuki Hokamoto
Proceedings of WAFA 2018 2018/11 Research paper (international conference proceedings)
Weld Toe Modification by Friction Stir Processing Using a Spherical Tip Tool in High-Strength Low-Alloy Steel Joints
Hajime Yamamoto, Yoshikazu Danno, Kazuhiro Ito, Hidetoshi Fujii
Proceedings of WAFA 2018 2018/10 Research paper (international conference proceedings)
Cold rolling and intercritical annealing of C-Mn steel sheets with different initial microstructures
Y. Karimi, S. Hossein Nedjad, H. Shirazi, M. Nili Ahmadabadi, H. Hamed Zargari, K. Ito
Materials Science & Engineering A Vol. 736 p. 392-399 2018/09 Research paper (scientific journal)
Superior mechanical strength of an intermediate layer interface over conventional wavy interfaces in (Nb or Ta)/Cu explosive welding joints
Pradeep Kumar, PARCHURI, Shota KOTEGAWA, Hajime YAMAMOTO, Kazuhiro ITO, Kazuyuki HOKAMOTO
Proceedings of IIW 2018 2018/07 Research paper (international conference proceedings)
Effects of Insert Metal Type on Interfacial Microstructure During Dissimilar Joining of TiAl Alloy to SCM440 by Friction Welding
Jong-Moon Park, Ki-Young Kim, Kyoung-Kyun Kim, Kazuhiro Ito, Makoto Takahashi, Myung-Hoon Oh
Metals and Materials International Vol. 24 No. 3 p. 626-632 2018/05/01 Research paper (scientific journal)
Publisher: Korean Institute of Metals and Materials
Application of Friction Stir Processing to Weld Toe for Fatigue Strength Improvement of High-Strength Low-Alloy Steel Joint
Hajime Yamamoto, Yoshikazu Danno, Kazuhiro Ito, Yoshiki Mikami, Kazuyuki Kohama, Hidetoshi Fujii
QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 36 No. 4 p. 1WL-4WL 2018 Research paper (scientific journal)
Publisher: Japan Welding Society
Effects of heat-affected-zone microstructure and molten-zinc temperature on zinc embrittlement cracking induced
Hiroshi MUTO, Yoshikazu DANNO, Hajime YAMATOMO, Kazuhiro ITO
QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 36 No. 4 p. 230-237 2018 Research paper (scientific journal)
Publisher: Japan Welding Society
Effects of Microstructural Modification Using Friction Stir Processing on Fatigue Strength of Butt-Welded Joints for High-Strength Steels
Hajime Yamamoto, Kazuhiro Ito
Materials Sciences and Applications Vol. 09 No. 07 p. 625-636 2018 Research paper (scientific journal)
Publisher: Scientific Research Publishing, Inc.
Spherical porous granules in MgO Fe2O3Nb2O5 system: In situ observation of formation behavior using high-temperature confocal laser-scanning microscopy
Yoshikazu Suzuki, Hiroya Abe, Hajime Yamamoto, Kazuhiro Ito, Hiroshige Inoue, Mayumi Nakamura
Journal of the European Ceramic Society Vol. 37 No. 16 p. 5339-5345 2017/12 Research paper (scientific journal)
Publisher: Elsevier BV
Effect of SiOx capping film on crystallization of Ge film by flash lamp annealing
The Institute of Electronics, Information and Communication Engineering Technical Report Vol. 117 No. 372 p. 77-80 2017/12 Research paper (other academic)
Application of Friction Stir Processing to High-tensile-steel Welds
K. ITO, H. YAMAMOTO, T. OKUDA, H.IZUMI, M. TAKAHASHI, K. KOHAMA, H. FUJII
Proceeding of IWIT & TWIT 2017 p. 12-18 2017/11 Research paper (international conference proceedings)
Numerical modeling of diffusible hydrogen localization in duplex stainless steel weld metal
Y. Mikami, Y. Shibamoto, G. Ogita, K. Ito, M. Mochizuki
Proceedings of WSE & CAWE 2017 p. 145-148 2017/10 Research paper (international conference proceedings)
Application of Friction Stir Processing to High-tensile-steel Welds
K. ITO, H. YAMAMOTO, M. TAKAHASHI, K. KOHAMA, H. FUJII
Proceeding of WSE & CAWE 2017 p. 263-266 2017/10 Research paper (international conference proceedings)
Application of Friction Stir Processing to High-tensile-steel Welds
K. Ito, H. Yamamoto, M. Takahashi, K. Kohama, H. Fujii
Proceedings of WSE & CAWE 2017 2017/10 Research paper (international conference proceedings)
Improvement of smooth surface of RuO2 bottom electrode on Al2O3 buffer layer and characteristics of RuO2/TiO2/Al2O3/TiO2/RuO2 capacitors
Tomomi Sawada, Toshihide Nabatame, Thang Duy Dao, Ippei Yamamoto, Kazunori Kurishima, Takashi Onaya, Akihiko Ohi, Kazuhiro Ito, Makoto Takahashi, Kazuyuki Kohama, Tomoji Ohishi, Atushi Ogura, Tadaaki Nagao
Journal of Vacuum Science & Technology A Vol. 35 No. 6 2017/08 Research paper (scientific journal)
Study on the Microstructure and Liquid Phase Formation in a Semisolid Gray Cast Iron
Davi Munhoz Benati, Kazuhiro Ito, Kazuyuki Kohama, Hajime Yamamoto, Eugenio Jose Zoqui
Metallurgical and Materials Transactions B 2017/06 Research paper (scientific journal)
A new process for design and manufacture of tailor-made functionally graded composites through friction stir additive manufacturing
Abhay Sharma, Vijendra Bandari, Kazuhiro Ito, Kazuyuki Kohama, R. M. Ramji, H. S. Himasekhar
Journal of Manufacturing Processes Vol. 26 p. 122-130 2017/04/01 Research paper (scientific journal)
Publisher: Elsevier Ltd
Formation of nanocrystalline silicon in SiOx by soft X-ray irradiation at low temperature
Akira Heya, Fumito Kusakabe, Naoto Matsuo, Kazuhiro Kanda, Kazuyuki Kohama, Kazuhiro Ito
Japanese Journal of Applied Physics Vol. 56 No. 3 p. 035501-1-035501-5 2017/03/01 Research paper (scientific journal)
Publisher: Japan Society of Applied Physics
Report of visual-JW 2016
Kazuhiro Ito
Yosetsu Gakkai Shi/Journal of the Japan Welding Society Vol. 86 No. 3 p. 189-191 2017 Research paper (international conference proceedings)
Publisher: Japan Welding Society
Dissimilar materials joining between stainless steel and carbon fiber reinforced thermoplastic by friction lap joining
Tsuyoshi Miwa, Daiki Kitagawa, Kimiaki Nagatsuka, Hiroto Yamaoka, Kazuhiro Ito, Kazuhiro Nakata
Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society Vol. 35 No. 1 p. 29-35 2017 Research paper (scientific journal)
Publisher: Japan Welding Society
Phase transitions from semiconductive amorphous to conductive polycrystalline in indium silicon oxide thin films
Nobuhiko Mitoma, Bo Da, Hideki Yoshikawa, Toshihide Nabatame, Makoto Takahashi, Kazuhiro Ito, Takio Kizu, Akihiko Fujiwara, Kazuhito Tsukagoshi
Applied Physics Letters Vol. 109 No. 22 p. 221903-1-221903-5 2016/11/28 Research paper (scientific journal)
Publisher: American Institute of Physics Inc.
Direct solid-state diffusion bonding of zirconium carbide using a spark plasma sintering system
Kazuyuki Kohama, Kazuhiro Ito
Materials and Design Vol. 110 p. 888-894 2016/11/15 Research paper (scientific journal)
Publisher: Elsevier Ltd
SiC/SiC Joining Utilizing Paste-like Si Powder in a Graphite Pipe Heated Electrically
Kazuyuki Kohama, Kazuhiro Ito, Shunichi Terada, Soshu Kirihara
Proceedings of 10th International Conference on Trends in Welding Research & 9th International Welding Symposium of Japan Welding Society (9WS) p. 895-898 2016/10 Research paper (international conference proceedings)
Thermal management in manufacture of thin-walled components produced by arc-based additive manufacturing
Jayprakash P. Sharma, Suresh Kumar Goak, Surya S. Kumar, Kazuyuki Kohama, Abhay Sharma, Kazuhiro Ito
Proceedings of 10th International Conference on Trends in Welding Research & 9th International Welding Symposium of Japan Welding Society (9WS) p. 536-539 2016/10 Research paper (international conference proceedings)
Increase in Fatigue Strength of Butt-Welded High-Tensile-Steel Joints by Friction Stir Processing
Hajime Yamamoto, Kazuhiro Ito, Makoto Takahashi, Kazuyuki Kohama, Hidetoshi Fujii
Proceedings of 10th International Conference on Trends in Welding Research & 9th International Welding Symposium of Japan Welding Society (9WS) p. 875-878 2016/10 Research paper (international conference proceedings)
Increase in Fatigue Strength and Charpy Absorbed Energies of TIG-welded SS400 Steel Plates by Friction-Stir-Processing Grain-Refinement
Kazuhiro Ito, Tatsuya Okuda, Hiroki Izumi, Makoto Takahashi, Kazuyuki Kohama, Hajime Yamamoto, Hidetoshi Fujii
Proceedings of 10th International Conference on Trends in Welding Research & 9th International Welding Symposium of Japan Welding Society (9WS) p. 866-869 2016/10 Research paper (international conference proceedings)
In Situ Observation of Semisolid Fe-2.5C-1.5Si Gray Cast Iron
Davi Munhoz Benati, Kazuhiro Ito, Kazuyuki Kohama, Hajime Yamamoto, Eugênio José Zoqui
Solid State Phenomena Vol. 256 p. 63-68 2016/09 Research paper (scientific journal)
Publisher: Trans Tech Publications, Ltd.
Formation of nc-Si in SiOx by flash lamp anneling
Naoki Yoshioka, Akira Heya, Naoto Matuo, Yousuke Nakamura, Gakuhiko Yokomori, Masaki Yoshioka, Kazuyuki Kohama, Kazuhiro Ito
Proceedings of AM-FPD 2016 - 23rd International Workshop on Active-Matrix Flatpanel Displays and Devices: TFT Technologies and FPD Materials p. 189-190 2016/08/15 Research paper (international conference proceedings)
Publisher: Institute of Electrical and Electronics Engineers Inc.
Homogeneous double-layer amorphous Si-doped indium oxide thin-film transistors for control of turn-on voltage
Takio Kizu, Shinya Aikawa, Toshihide Nabatame, Akihiko Fujiwara, Kazuhiro Ito, Makoto Takahashi, Kazuhito Tsukagoshi
Journal of Applied Physics Vol. 120 No. 4 p. 045702-1-045702-5 2016/07/28 Research paper (scientific journal)
Publisher: American Institute of Physics Inc.
Open a Discussion by Osaka University Students Attending the Internship
ITO Kazuhiro, NAKAJIMA Atsushi, KIKUCHI Ryota, IZAWA Takeru, MARUNO Kenji, NAKAI Tomoka, YAMAGUCHI Tasuku, MATOBA Ui, KATSUMATA Mihoko
JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 85 No. 1 p. 56-71 2016/01
Publisher: JAPAN WELDING SOCIETY
Improvement of the effective work function and transmittance of thick indium tin oxide/ultrathin ruthenium doped indium oxide bilayers as transparent conductive oxide
Kattareeya Taweesup, Ippei Yamamoto, Toyohiro Chikyow, Gobboon Lothongkum, Kazutoshi Tsukagoshi, Tomoji Ohishi, Sukkaneste Tungasmita, Patama Visuttipitukul, Kazuhiro Ito, Makoto Takahashi, Toshihide Nabatame
Thin Solid Films Vol. 598 p. 126-130 2016/01/01 Research paper (scientific journal)
Publisher: Elsevier B.V.
On process-structure-property interconnection in anti-phase synchronised twin-wire GMAW of low carbon steel
S. Q. Moinuddin, A. Kapil, K. Kohama, A. Sharma, K. Ito, M. Tanaka
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING Vol. 21 No. 6 p. 452-459 2016 Research paper (scientific journal)
Diffusion Bonding of Titanium Aluminide and Low-Carbon Steel Using a Spark Plasma Sintering System
KOHAMA Kazuyuki, ITO Kazuhiro
Trans. JWRI Vol. 44 No. 2 p. 23-26 2015/12 Research paper (bulletin of university, research institution)
Increase of Fatigue Strength of High-Tensile Steel Welds with Increase of Their Yield Stress using Friction Stir Processing
R. Yamasaki, K. Ito, K. Kohama, M. Takahashi, H. Yamamoto, H. Fujii, R. Ueji, C. Shiga
3rd International Conference in Africa and Asia, Welding and Failure Analysis of Engineering Materials (WAFA-2015) 2015/11 Research paper (international conference proceedings)
Charpy Impact Value of TIG-welded SS400 Steel Plates with Surface-Microstructure Modification by Friction Stir Processing
K. Ito, H. Izumi, K. Kohama, H. Fujii
3rd International Conference in Africa and Asia, Welding and Failure Analysis of Engineering Materials (WAFA-2015) 2015/11 Research paper (international conference proceedings)
Characteristics of TiO2/Al2O3/TiO2 Capacitors with Plasma-enhanced ALD RuO2 Bottom Electrode for Future DRAM
T. Sawada, T. Nabatame, I. Yamamoto, K. Kurishima, T. Onaya, A. Ohi, K. Ito, M. Takahashi, K. Kohama, T. Ohishi, A. Ogura, T. Nagao
Proc. 2015 International Workshop on Dielectric thin films for future electron devices - Science and Technology - 2015/11 Research paper (international conference proceedings)
溶接冶金学I-2 [溶接部の組織と材質変化] 溶接部の相変態と組織、組織の硬さ・靱性、溶接欠陥
伊藤 和博
平成27年度溶接工学夏季大学教材 p. 167-184 2015/07
Low-Temperature Cu-Cu Bonding Using Spark Plasma Sintering System
Kazuhiro Ito, Kazuyuki Kohama, Tadashi Saito
Quarterly J. Japan Welding Soc. Vol. 33 No. 2 p. 185s-189s 2015/06 Research paper (scientific journal)
Publisher: Japan Welding Society
Fatigue life increase by surface modification using friction stir processing for TIG-welded SS400 steel plates
K. Ito, T. Okuda, R. Yamasaki, K. Kohama, R. Ueji, H. Fujii, C. Shiga
68th Annual Assembly of Int. Inst. Welding (IIW) 2015/06 Research paper (international conference proceedings)
Report of visual-JW 2014
Kazuhiro Ito
Yosetsu Gakkai Shi/Journal of the Japan Welding Society Vol. 84 No. 3 p. 205-207 2015 Research paper (scientific journal)
Publisher: Japan Welding Society
Open Our Mind about the Lateset Experimental Observation and Simulation for Welding and Joining Phenomena
K. Ito, H. Yamaoka, M. Tanaka, K. Ogawa, K. Saida, M. Nakatani, M. Ohata
J. Japan Welding Soc. Vol. 84 No. 1 p. 5-18 2015/01
Role of the (Ta/Nb)O-x/Al2O3 interface on the flatband voltage shift for Al2O3/(Ta/Nb)O-x/Al2O3 multilayer charge trap capacitors
Toshihide Nabatame, Akihiko Ohi, Kazuhiro Ito, Makoto Takahashi, Toyohiro Chikyo
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A Vol. 33 No. 1 2015/01 Research paper (scientific journal)
軟X線源を用いたSiOx中nc-Siの形成
草壁史, 平野翔大, 部家彰, 松尾直人, 神田一浩, 望月孝晏, 宮本修治, 小濱和之, 伊藤和博
(一社)電子情報通信学会信学技報 Vol. 114 No. 360 p. 99-102 2014/12
Synthesis Using Cu (Ti) Alloy Films for Self-Forming Functionality in Electronic Devices
ITO Kazuhiro, KOHAMA Kazuyuki
Trans. JWRI Vol. 43 No. 2 p. 37-43 2014/12 Research paper (bulletin of university, research institution)
Increase of bending fatigue resistance for tungsten inert gas welded SS400 steel plates using friction stir processing
Kazuhiro Ito, Tatsuya Okuda, Rintaro Ueji, Hidetoshi Fujii, Chiaki Shiga
MATERIALS & DESIGN Vol. 61 p. 275-280 2014/09 Research paper (scientific journal)
Low-Temperature Synthesis of High-Adhesion Cu(Mg) Alloy Films on Glass Substrates
Kazuhiro Ito, Keiji Hamasaka, Kazuyuki Kohama, Yasuharu Shirai, Masanori Murakami
JOURNAL OF ELECTRONIC MATERIALS Vol. 43 No. 7 p. 2540-2547 2014/07 Research paper (scientific journal)
Effective Work Function of Ultra-thin RuO2 Film
I. Yamamoto, T. Nabatame, T. Katareeya, M. Takahashi, K. Ito, A. Ohi, T. Chikyo, T. Ohishi
Extended Abstracts of the 19th Workshop on Gate Stack Technology and Physics p. 127-130 2014/06 Research paper (other academic)
Characteristics of charge trap flash memory with Al2O3/(Ta/Nb)Ox/Al2O3 multi-layer by ALD method
T. Nabatame, A. Ohi, K. Ito, M. Takahashi, T. Chikyo
IEICE Technical Report, Silicon Devices and Materials Vol. IEICE-114 No. 88 p. 31-35 2014/06 Research paper (other academic)
Friction Stir Processing Increasing Fatigue Strength of Arc-Welded Steel Plates
K. Ito, T. Okuda, R. Yamazaki, K. Kohama, R. Ueji, H. Fujii, C. Shiga
Proceeding of Japan-Indonesia Welding Seminar 2014 p. 14-19 2014/05 Research paper (international conference proceedings)
Characteristics of charge trap flash memory with Al2O3/(Ta/Nb)O-x/Al2O3 multi-layer
T. Nabatame, A. Ohi, K. Ito, M. Takahashi, T. Chikyo
DIELECTRICS FOR NANOSYSTEMS 6: MATERIALS SCIENCE, PROCESSING, RELIABILITY, AND MANUFACTURING Vol. 61 No. 2 p. 293-300 2014 Research paper (international conference proceedings)
Low-Temperature Crystallization of Thin-Film Semiconductor by Soft X-ray Irradiation
Fumito Kusakabe, Yuki Maruyama, Akira Heya, Naoto Mathuo, Kazuhiro Kanda, Takayasu Motizuki, Kazuhiro Ito, Makoto Takahashi
IEICE Technical Report, Silicon Devices and Materials Vol. IEICE-113 No. 351 p. 61-66 2013/12 Research paper (other academic)
Publisher: The Institute of Electronics, Information and Communication Engineers
Cu-interconnect synthesis on glass using a Cu(Mg) alloy
Kazuhiro Ito, Keiji Hamasaka, Kazuyuki Kohama, Yasuharu Shirai, Masanori Murakami
Proceedings of International Symposium on Interfacial Joining and Surface Technology ---Solid State Joining, Brazing and Soldering, Surface Treatment, Advanced Packaging--- (IJST2013) p. 41-42 2013/11
Crystallization of Si1-xGex Multilayer by Soft X-ray Irradiation
Akira Heya, Naoto Matsuo, Makoto Takahashi, Kazuhiro Ito, Kazuhiro Kanda
APPLIED PHYSICS EXPRESS Vol. 6 No. 6 2013/06 Research paper (scientific journal)
Integration of Various Functions Using Cu Alloy Films in Cu Interconnects for Electronic Devices
ITO Kazuhiro
Bulletin of the Japan Institute of Metals Vol. 52 No. 3 p. 108-115 2013/03
Publisher: The Japan Institute of Metals and Materials
Effects of Reducing Annealing Temperature on Ni/Al Ohmic Contacts to n- and p-Type 4H-SiC
ITO Kazuhiro, TAKEDA Hidehisa, SHIRAI Yasuharu, MURAKAMI Masanori
Trans. JWRI Vol. 41 No. 2 p. 33-36 2012/12 Research paper (bulletin of university, research institution)
Publisher: Joining and Welding Research Institute, Osaka University
Oxygen-Induced Barrier Failure in Ti-Based Self-Formed and Ta/TaN Barriers for Cu Interconnects
Kazuhiro Ito, Kazuyuki Kohama, Keiji Hamasaka, Yutaka Sonobayashi, Nobuharu Sasaki, Yasuharu Shirai, Masanori Murakami
JAPANESE JOURNAL OF APPLIED PHYSICS Vol. 51 No. 4 2012/04 Research paper (scientific journal)
Role of Cu film texture in grain growth correlated with twin boundary formation
Kazuyuki Kohama, Kazuhiro Ito, Takuya Matsumoto, Yasuharu Shirai, Masanori Murakami
Acta Materialia Vol. 60 No. 2 p. 588-595 2012/01 Research paper (scientific journal)
Structure analyses of Ti-based self-formed barrier layers
Kazuyuki Kohama, Kazuhiro Ito, Yutaka Sonobayashi, Kazuyuki Ohmori, Kenichi Mori, Kazuyoshi Maekawa, Yasuharu Shirai, Masanori Murakami
Japanese Journal of Applied Physics Vol. 50 No. 4 2011/04 Research paper (scientific journal)
Growth of Ti-based interface layer in Cu(Ti)/glass samples
Shuji Uehara, Kazuhiro Ito, Kazuyuki Kohama, Takashi Onishi, Yasuharu Shirai, Masanori Murakami
Materials Transactions Vol. 52 No. 3 p. 491-497 2011/03 Research paper (international conference proceedings)
Resistivity reduction and adhesion increase induced by surface and interface segregation of Ti atoms in Cu(Ti) alloy films on glass substrates
Shuji Uehara, Kazuhiro Ito, Kazuyuki Kohama, Takashi Onishi, Yasuharu Shirai, Masanori Murakami
Materials Transactions Vol. 51 No. 9 p. 1627-1632 2010/09 Research paper (scientific journal)
Ti-rich barrier layers self-formed on porous low-K layers using Cu(1 at.% Ti) alloy films
Kazuhiro Ito, Kazuyuki Kohama, Tomohisa Tanaka, Kenichi Mori, Kazuyoshi Maekawa, Yasuharu Shirai, Masanori Murakami
Journal of Electronic Materials Vol. 39 No. 8 p. 1326-1333 2010/08 Research paper (scientific journal)
Performance of Cu Dual-Damascene Interconnects Using a Thin Ti-Based Self-Formed Barrier Layer for 28 nm Node and Beyond
Kazuyuki Ohmori, Kenichi Mori, Kazuyoshi Maekawa, Kazuyuki Kohama, Kazuhiro Ito, Takashi Ohnishi, Masao Mizuno, Koyu Asai, Masanori Murakami, Hiroshi Miyatake
JAPANESE JOURNAL OF APPLIED PHYSICS Vol. 49 No. 5 2010/05 Research paper (scientific journal)
Effects of pore sealing on self-formation of Ti-rich barrier layers in Cu(Ti)/porous-low-k samples
Kazuyuki Kohama, Kazuhiro Ito, Yutaka Sonobayashi, Tomohisa Tanaka, Kenichi Mori, Kazuyoshi Maekawa, Yasuharu Shirai, Masanori Murakami
Japanese Journal of Applied Physics Vol. 49 No. 4 2010/04 Research paper (scientific journal)
Ti合金による自己形成バリアを用いたデュアルダマシンCu配線の特性
大森 和幸、森 健壹、前川 和義、小濱 和之、伊藤 和博、大西 隆、水野 雅夫、浅井 孝祐、村上 正紀、宮武 浩
(社)電子情報通信学会 信学技報 Vol. 109 p. 37-41 2010/02
Application of Ti-based self-formation barrier layers to Cu dual-damascene interconnects
Kazuhiro Ito, Kazuyuki Ohmori, Kazuyuki Kohama, Kenichi Mori, Kazuyoshi Maekawa, Koyu Asai, Masanori Murakami
AIP Conference Proceedings Vol. 1300 p. 91-97 2010 Research paper (international conference proceedings)
Characterization of self-formed Ti-based barrier layers in Cu(Ti)/dielectric-layer samples using x-ray photoelectron spectroscopy
Kazuyuki Kohama, Kazuhiro Ito, Yutaka Sonobayashi, Kenichi Mori, Kazuyoshi Maekawa, Yasuharu Shirai, Masanori Murakami
2010 IEEE International Interconnect Technology Conference, IITC 2010 2010 Research paper (international conference proceedings)
A key of self-formed barrier technique for reliability improvement of Cu dual damascene interconnects
Kazuyuki Ohmori, Kenichi Mori, Kazuyoshi Maekawa, Kazuyuki Kohama, Kazuhiro Ito, Takashi Ohnishi, Masao Mizuno, Masahiko Fujisawa, Masanori Murakami, Hiroshi Miyatake
2010 IEEE International Interconnect Technology Conference, IITC 2010 2010 Research paper (international conference proceedings)
Ohmic contacts on silicon carbide: The first monolayer and its electronic effect
Zhongchang Wang, Susumu Tsukimoto, Mitsuhiro Saito, Kazuhiro Ito, Masanori Murakami, Yuichi Ikuhara
Physical Review B - Condensed Matter and Materials Physics Vol. 80 No. 24 2009/12/01 Research paper (scientific journal)
Rutherford backscattering spectrometry analysis of self-formed Ti-rich interface layer growth in Cu(Ti)/low-k samples
Kazuyuki Kohama, Kazuhiro Ito, Kenichi Mori, Kazuyoshi Maekawa, Yasuharu Shirai, Masanori Murakami
Journal of Electronic Materials Vol. 38 No. 9 p. 1913-1920 2009/09 Research paper (scientific journal)
Growth and microstructure of epitaxial Ti3SiC2 contact layers on SiC
Susumu Tsukimoto, Kazuhiro Ito, Zhongchang Wang, Mitsuhiro Saito, Yuichi Ikuhara, Masanori Murakami
Materials Transactions Vol. 50 No. 5 p. 1071-1075 2009/05 Research paper (international conference proceedings)
Cu(Ti)/誘電体層界面における自己形成バリア層の構造および形成速度解析
小濱 和之、伊藤 和博、森 健壹、前川 和義、白井 泰治、村上 正紀
Interface2009界面科学技術機構会誌 p. 42-45 2009/04
Effects of TiN Buffer Layer Thickness on GaN Growth
K. Ito, Y. Uchida, S. Lee, S. Tsukimoto, Y. Ikemoto, K. Hirata, M. Murakami
Journal of Electronic Materials Vol. 38 p. 511-517 2009/01 Research paper (scientific journal)
Growth analysis of self-formed ti-rich interface layers in Cu(Ti)/dielectric-layer samples using rutherford backscattering spectrometry
Kazuyuki Kohama, Kazuhiro Ito, Kenichi Mori, Kazuyoshi Maekawa, Yasuharu Shirai, Masanori Murakami
Proceedings of the 2009 IEEE International Interconnect Technology Conference, IITC 2009 p. 159-160 2009 Research paper (international conference proceedings)
Rutherford Backscattering Spectrometry Analysis of Growth Rate and Activation Energy for Self-formed Ti-rich Interface Layers in Cu(Ti)/Low-k Samples
Kazuyuki Kohama, Kazuhiro Ito, Kenichi Mori, Kazuyoshi Maekawa, Yasuharu Shirai, Masanori Murakami
MRS Proceedings Vol. 1156 2009
Self-Formed Ti-Rich Barrier Layers in Cu(Ti)/Low-k Samples
K. Ito, K. Kohama, K. Mori, K. Maekawa, M. Murakami
AIP Conference Proceedings Vol. 1143 Vol. 1143 p. 118-131 2008/11 Research paper (international conference proceedings)
Simultaneous formation of Ni/Al ohmic contacts to both n- and p-type 4H-SiC
Kazuhiro Ito, Toshitake Onishi, Hidehisa Takeda, Kazuyuki Kohama, Susumu Tsukimoto, Mitsuru Konno, Yuya Suzuki, Masanori Murakami
Journal of Electronic Materials Vol. 37 No. 11 p. 1674-1680 2008/11 Research paper (scientific journal)
Effects of dielectric-layer composition on growth of self-formed Ti-rich barrier layers in Cu(1 at % Ti)/low-k samples
Kazuyuki Kohama, Kazuhiro Ito, Susumu Tsukimoto, Kenichi Mori, Kazuyoshi Maekawa, Masanori Murakami
Materials Transactions Vol. 49 No. 9 p. 1987-1993 2008/09 Research paper (scientific journal)
クリープ損傷高温その場測定陽電子寿命スペクトロメータ
白井泰治, 伊藤和博
材料とプロセス(CD−ROM) Vol. 21 No. 2 2008/09/01
Effects of Substrate Materials on Self-Formation Kinetics of Ti-Rich Barrier Layers in Cu(1at.%Ti)/Low-k Samples
K. Kohama, K. Ito, S. Tsukimoto, K. Mori, K. Maekawa, M. Murakami
Materials Transactions Vol. 49 p. 1987-1993 2008/08 Research paper (scientific journal)
Characterization of self-formed Ti-rich interface layers in Cu(Ti)/low-k samples
Kazuyuki Kohama, Kazuhiro Ito, Susumu Tsukimoto, Kenichi Mori, Kazuyoshi Maekawa, Masanori Murakami
Journal of Electronic Materials Vol. 37 No. 8 p. 1148-1157 2008/08 Research paper (scientific journal)
Simultaneous Formation of N- and P-type Ohmic Contacts to 4H-SiC Using the Binary Ni/Al System
K. Ito, T. Onishi, H. Takeda, S. Tsukimoto, M. Konno, Y. Suzuki, M. Murakami
Materials Research Society Symposium Proceedings Vol. 1069 2008/03 Research paper (international conference proceedings)
Self-formation of Ti-rich Layers at Cu(Ti)/low-k Interfaces
Kazuyuki Kohama, Kazuhiro Ito, Susumu Tsukimoto, Kenichi Mori, Kazuyoshi Maekawa, Masanori Murakami
MRS Proceedings Vol. 1079 2008
Effect of Reducing Thickness of TiN Buffer Layers on Epitaxial Growth of GaN Layers
K. Ito, Y. Uchida, S. Lee, S. Tsukimoto, Y. Ikemoto, K. Hirata, T. Uemura, M. Murakami
Materials Science Forum Vol. 561-565 p. 1217-1220 2007/10 Research paper (scientific journal)
Electrical Properties and Microstructures of Ultraviolet Transparent Ga2O3 Thin Films
Y. Shigetoshi, S. Tsukimoto, H. Takeda, K. Ito, M. Murakami
Materials Science Forum Vol. 561-565 p. 1233-1236 2007/10 Research paper (scientific journal)
Fabrication of Cu(Ti) Alloy Interconnects with Self-Formation of Thin Barrier Metal Layers Using a High-Pressure Annealing Process
S. Tsukimoto, T. Onishi, K. Ito, M. Konno, T. Yaguchi, T. Kamino, M. Murakami
Journal of Electronic Materials Vol. 36 p. 1658-1661 2007/09 Research paper (scientific journal)
Self-formation of Ti-rich interfacial layers in Cu(Ti) alloy films
Kazuhiro Ito, Susumu Tsukimoto, Masanori Murakami
Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers Vol. 46 No. 4 B p. 1942-1946 2007/04/24 Research paper (scientific journal)
Effects of Substrate Materials on Self-Formation of Ti-Rich Interface Layers in Cu(Ti) Alloy Films
K. Ito, S. Tsukimoto, T. Kabe, K. Tada, M. Murakami
Journal of Electronic Materials Vol. 36 p. 606-613 2007/04 Research paper (scientific journal)
Effect of Annealing Ambient on Self-Formation Mechanism of Diffusion Barrier Layers Used in Cu(Ti) Interconnects
S. Tsukimoto, T. Kabe, K. Ito, M. Murakami
Journal of Electronic Materials Vol. 36 p. 258-265 2007/04 Research paper (scientific journal)
Characterization of GaN layers Grown on Metallic TiN Buffer Layers
S-J. Lee, K. Ito, Y. Uchida, S. Tsukimoto Y. Ikemoto, K. Hirata, M. Murakami
Extraction, Processing, Structure and Properties Proceedings on Electronic, Magnetic and Photonic Materials Division Symposium p. 1-5 2007/02 Research paper (international conference proceedings)
Epitaxial Growth of GaN Layers on Ultra-Thin Metallic TiN Buffer Layers
K. Ito, Y. Uchida, S-J. Lee, S. Tsukimoto Y. Ikemoto, K. Hirata, M. Murakami
Extraction, Processing, Structure and Properties Proceedings on Electronic, Magnetic and Photonic Materials Division Symposium p. 7-12 2007/02 Research paper (international conference proceedings)
Reduction of Electrical Resistivity of Cu Interconnects
M. Murakami, M. Moriyama, S. Tsukimoto, K. Ito, T. Onichi
Extraction, Processing, Structure and Properties Proceedings on Electronic, Magnetic and Photonic Materials Division Symposium p. 1-9 2007/02 Research paper (international conference proceedings)
Resistivity reduction of Cu interconnects
Kazuhiro Ito, Susumu Tsukimoto, Miki Moriyama, Masanori Murakami
AIP Conference Proceedings Vol. 945 p. 1-10 2007 Research paper (international conference proceedings)
電子顕微鏡法による材料開発のための微細構造研究最前線(6)EDS Cu(Ti)合金微細配線における極薄バリア層の自己組織形成
着本享, 大西隆, 伊藤和博, 村上正紀, 今野充, 矢口紀恵, 上野武夫
まてりあ Vol. 45 No. 12 p. 879-879 2006/12/20
Publisher: The Japan Institute of Metals and Materials
Cu合金配線におけるバリア層の自己組織化
伊藤 和博、着本 享、村上 正紀
日本金属学会分科会シンポジウム「シリコンデバイスの最先端技術・材料開発の展望」 p. 30-33 2006/09
Effects of Al ion implantation to 4H-SiC on the specific contact resistance of TiAl-based contact materials
Kazuhiro Ito, Susumu Tsukimoto, Masanori Murakami
Science and Technology of Advanced Materials Vol. 7 No. 6 p. 496-501 2006/09 Research paper (scientific journal)
Epitaxial GaN Layer Growth Using Nitrogen Enriched TiN Buffer Layers
K. Ito, Y. Uchida, S-J. Lee, S. Tsukimoto Y. Ikemoto, K. Hirata, M. Murakami
Materials Research Society Symposium Proceedings Vol. 916 p. 71-76 (0916-DD04-06) 2006/04 Research paper (international conference proceedings)
Simultaneous Formation of Ohmic Contacts for Both N- and P-Type 4H-SiC Using NiAl-Based Contact Materials
S. Tsukimoto, T. Onishi, K. Ito, and M. Murakami
Materials Research Society Symposium Proceedings Vol. 911 p. 359-364(0911-B11-05) 2006/04 Research paper (international conference proceedings)
Electrical resistivity of polycrystalline Cu interconnects with nano-scale linewidth
Masahiro Shimada, Miki Moriyama, Kazuhiro Ito, Susumu Tsukimoto, Masanori Murakami
Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures Vol. 24 No. 1 p. 190-194 2006/01 Research paper (scientific journal)
Epitaxial growth of GaN layers on metallic TiN buffer layers
Yu Uchida, Kazuhiro Ito, Susumu Tsukimoto, Yuhei Ikemoto, Koji Hirata, Naoki Shibata, Masanori Murakami
Journal of Electronic Materials Vol. 35 No. 10 p. 1806-1811 2006 Research paper (scientific journal)
Publisher: Springer New York
ULSI Si半導体デバイス用のCu配線材のナノ化の課題
村上 正紀、守山 実希、着本 享、伊藤 和博
表面技術 p. 96-100 2005/12
進化するナノテクノロジー ULSI Si半導体デバイス用のCu配線材のナノ化の課題
村上正紀, 守山実希, 着本享, 伊藤和博
表面技術 Vol. 56 No. 12 p. 802-806 2005/12/01
Publisher: The Surface Finishing Society of Japan
Growth of GaN on Nitriding TiN Buffer Layers
T. Watanabe, K. Ito, S. Tsukimoto, Y.Ushida, M. Moriyama, N. Shibata, M. Murakam
Materials Transactions Vol. 46 No. 9 p. 1975-1978 2005/10 Research paper (scientific journal)
Effects of Al doping on the thermoelectric performance of CoSi single crystal
C. C. Li, W. L. Ren, L. T. Zhang, K. Ito, J. S. Wu
Journal of Applied Physics Vol. 98 No. 6 2005/09/15 Research paper (scientific journal)
Grain Growth Mechanism of Cu Thin Films
M. Murakami, M. Moriyama, S. Tsukimoto, K. Ito
Materials Transactions Vol. 46 No. 7 p. 1737-1740 2005/08 Research paper (scientific journal)
Effects of Ge and B substitution on thermoelectric properties of CoSi
W. L. Ren, C. C. Li, L. T. Zhang, K. Ito, J. S. Wu
Journal of Alloys and Compounds Vol. 392 No. 1-2 p. 50-54 2005/04/19 Research paper (scientific journal)
Publisher: Elsevier BV
超高温材料としてのMo‐Si‐B三元系合金の機械的性質および機能性
伊藤和博, 林泰輔, 村上敬, 沼倉宏
まてりあ Vol. 44 No. 2 p. 131-137 2005/02/20
Publisher:
Elastic and thermal expansion anisotropy of Mo-based 5-3 silicides
T Hayashi, K Ito, M Takamoto, K Tanaka
PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5 Vol. 475-479 p. 695-698 2005 Research paper (scientific journal)
Reaction Diffusion of MoSi2 and Mo5SiB2
T. Hayashi, K. Ito, H. Numakura
Intermetallics Vol. 13/1 p. 93-100 2005/01 Research paper (scientific journal)
Oxidation protective silicide coating on Mo-Si-B alloys
Kazuhiro Ito, Taisuke Hayashi, Masato Yokobashi, Takashi Murakami, Hiroshi Numakura
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Vol. 36 No. 3 p. 627-636 2005 Research paper (scientific journal)
Publisher: Minerals, Metals and Materials Society
The effect of Nb and W alloying additions to the thermal expansion anisotropy and elastic properties of Mo5Si3
Taisuke Hayashi, Kazuhiro Ito, Misako Takamoto, Katsushi Tanaka
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Vol. 36 No. 3 p. 533-538 2005 Research paper (scientific journal)
Publisher: Minerals, Metals and Materials Society
Formation of Ti diffusion barrier layers in thin Cu(Ti) alloy films
S. Tsukimoto, T. Morita, M. Moriyama, Kazuhiro Ito, Masanori Murakami
Journal of Electronic Materials Vol. 34 No. 5 p. 592-599 2005 Research paper (international conference proceedings)
Publisher: Minerals, Metals and Materials Society
Simultaneous formation of p- And n-type ohmic contacts to 4H-SiC using the ternary Ni/Ti/Al system
S. Tsukimoto, T. Sakai, T. Onishi, Kazuhiro Ito, Masanori Murakami
Journal of Electronic Materials Vol. 34 No. 10 p. 1310-1312 2005 Research paper (scientific journal)
Publisher: Minerals, Metals and Materials Society
電子顕微鏡法による材料開発のための微細構造研究最前線(4)p型SiC半導体/TiAl系オーミック・コンタクト材の界面構造
着本享, 伊藤和博, 村上正紀
まてりあ Vol. 43 No. 12 p. 992-992 2004/12/20
Publisher: The Japan Institute of Metals and Materials
Creep of Single Crystalline and Polycrystalline T2 Phase in the Mo-Si-B System
T. Hayashi, K. Ito, K. Ihara, M. Fujikura, M. Yamaguchi
Intermetallics Vol. 12/7/2009 p. 699-704 2004/04 Research paper (scientific journal)
Microstructure of Nb Substrates Coated with Mo(Si,Al)2-Al2O3 Composite and B-Doped Mo5Si3 Layers by Spark Plasma Sintering
T. Murakami, S. Sasaki, K. Ito, H. Inui, M. Yamaguchi
Intermetallics Vol. 12/7/2009 p. 749-754 2004/04 Research paper (scientific journal)
Effects of In-Doping on the Thermoelectric Properties of β-Zn4Sb3
M. Tsutsui, L. T. Zhang, K. Ito, M. Yamaguchi
Intermetallics Vol. 12/7/2009 p. 809-813 2004/04 Research paper (scientific journal)
Evolution kinetics and microstructure of MoSi2 and Mo 5Si3 surface layers on two-phase Mo-9Si-18B alloy during pack-cementation and high-temperature oxidation
Kazuhiro Ito, Taisuke Hayashi, Masato Yokobayashi, Hiroshi Numakura
Intermetallics Vol. 12 No. 4 p. 407-415 2004/04 Research paper (scientific journal)
Electrical and thermal properties of single crystalline Mo 5X3 (X=Si, B, C) and related transition metal 5-3 silicides
K. Ito, T. Hayashi, H. Nakamura
Intermetallics Vol. 12 No. 4 p. 443-450 2004/04 Research paper (scientific journal)
Ferromagnetism of amorphous LaCo2 hydride
H. Nakamura, A. Nakahara, M. Shiga, K. Ito, M. Yamaguchi, A. V. Tsvyashchenko, L. N. Fomicheva
Physica Status Solidi (B) Basic Research Vol. 241 No. 5 p. 1096-1099 2004/04 Research paper (scientific journal)
Low Thermal Conductivity and Related Thermoelectric Properties of Zn4Sb3 and CoSb3 Thin Films
K. Ito, L.T. Zhang, K. Adachi, M. Yamaguchi
Materials Research Society Symposium Proceedings Vol. 793 p. 115-120 2003/12 Research paper (international conference proceedings)
Thermoelectric Properties of Zn4Sb3 Thin Films Prepared by Magnetron Sputtering
L. T. Zhang, M. Tsutsui, K. Ito, M. Yamaguchi
Thin Solid Film Vol. 443 p. 84-90 2003/09 Research paper (scientific journal)
Room temperature fracture toughness and high temperature strength of T2/Moss and (Mo,Nb)ss/T1/T2 eutectic alloys in the Mo-Si-B system
Kazuhiro Ito, Michiaki Kumagai, Taisuke Hayashi, Masaharu Yamaguchi
Scripta Materialia Vol. 49 No. 4 p. 285-290 2003/08 Research paper (scientific journal)
Oxidation behavior of Mo-9Si-18B alloy pack-cemented in a Si-base pack mixture
Kazuhiro Ito, Takashi Murakami, Katsuyuki Adachi, Masaharu Yamaguchi
Intermetallics Vol. 11 No. 8 p. 763-772 2003/08 Research paper (scientific journal)
Physical and mechanical properties of single crystals of the Mo5Si3C phase
T. Hayashi, K. Ito, K. Tanaka
Intermetallics Vol. 11 No. 8 p. 835-840 2003/08 Research paper (scientific journal)
Oxidation Behavior of Mo-Based Alloys Coated with Silicide Using the Halide-Activated Pack Cementation Method
K. Ito, T. Hayashi, T. Murakami, M. Yamaguchi
Materials Science Forum Vol. 426-4 p. 1745-1750 2003/08 Research paper (scientific journal)
Oxidation Behavior of Cr-Doped Nb(Si,Al)2 and Coating Nb Substrates with Cr-Doped Nb(Si,Al)2
T. Murakami, S. Sasaki, K. Ito, H. Inui, M. Yamaguchi
Materials Science Forum Vol. 426-4 p. 2557-2562 2003/08 Research paper (scientific journal)
Thermoelectric Properties of CoSi Thin Films
K. Adachi, K. Ito, L.T. Zhang, M. Yamaguchi
Materials Science Forum Vol. 426-4 p. 3445-3450 2003/08 Research paper (scientific journal)
Properties and Microstructures of a High-Performance Thermoelectric Intermetallic Compound ? β-Zn4Sb3
L. T. Zhang, M. Tsutsui, K. Ito, H. Inui, M. Yamaguchi
Materials Science Forum Vol. 426-4 p. 75-81 2003/08 Research paper (scientific journal)
Mo5X3 (X=Si,B,C) Intermetallics for Ultra-High Temperature Applications
K. Ito, M. Yamaguchi
Recent Research Developments in Materials Science & Engineering Vol. 2 p. 39-54 2003/04
超耐熱材料Mo-Si-B合金---単結晶を用いた基礎物性測定から耐酸化コーティングプロセスに至るまで---
伊藤 和博、林 泰輔、横林 政人、村上 敬、山口 正治
バウンダリー：材料開発ジャーナル Vol. 19 p. 16-21 2003/04
Oxidation behavior and thermal stability of Cr-doped Nb(Si,Al)2 and Nb3Si5Al2 matrix compacts prepared by spark plasma sintering
T. Murakami, S. Sasaki, K. Ito
Intermetallics Vol. 11 No. 3 p. 269-278 2003/03 Research paper (scientific journal)
Effects of ZnSb and Zn Inclusions on the Thermoelectric Properties of β-Zn4Sb3
L. T. Zhang, M. Tsutsui, K. Ito, M. Yamaguchi
J. Alloys and Compounds Vol. 358 p. 252-256 2003/03 Research paper (scientific journal)
Microstructures with martensitic features induced by absorption of a large amount of hydrogen in a B2 single-phase Ti-22Al-27Nb alloy
L. T. Zhang, K. Ito, H. Inui, V. K. Vasudevan, M. Yamaguchi
Acta Materialia Vol. 51 No. 3 p. 781-788 2003/02/07 Research paper (scientific journal)
Reversible Hydrogen Absorption/Desorption and Related Lattice Deformation of Ti3Al Based Alloys in the Ti-Al-Nb System
K. Ito, L.T. Zhang, Y. Okabe, V.K. Vasudevan, M. Yamaguchi
Materials Research Society Symposium Proceedings Vol. 753 p. BB5.55.1-BB5.55.6 2002/12 Research paper (international conference proceedings)
On Mo-9Si-18B Alloys with T2-Moss Eutectic Microstructure: Mechanical Properties and Protective Silicide Coating
M. Kumagai, K. Ito, M. Yamaguchi
Materials Research Society Symposium Proceedings Vol. 753 p. BB5.26.1-BB5.26.6 2002/12 Research paper (international conference proceedings)
Physical and Mechanical Properties of Mo5X3+alpha (X=Si,B,C) Single Crystals
T. Hayashi, K. Ito, K. Tanaka, M. Yamaguchi
Materials Research Society Symposium Proceedings Vol. 753 p. BB5.27.1-BB5.27.6 2002/12 Research paper (international conference proceedings)
Reversible hydrogen absorption/desorption and related phase transformations in a Ti3Al alloy with the stoichiometry composition
Kazuhiro Ito, Yoshiharu Okabe, Lanting T. Zhang, Masaharu Yamaguchi
Acta Materialia Vol. 50 No. 19 p. 4901-4912 2002/11/14 Research paper (scientific journal)
Hydrogen Absorption/Desorption Behavior of Ti-22Al-27Nb Alloys with β0 Single-Phase and β/O Two-Phase Microstructures
K. Ito, L.T. Zhang, V. Vasudevan, M. Yamaguchi
Materials Science & Engineering A Vol. A329-331 p. 356-361 2002/09 Research paper (scientific journal)
Effects of Cold-Rolling on the Hydrogen Absorption/Desorption Behavior of Ti-22Al-27Nb Alloy
L.T. Zhang, K. Ito, V. Vasudevan, M. Yamaguchi
Materials Science & Engineering A Vol. A329-331 p. 329-332 2002/09 Research paper (scientific journal)
Mechanical Properties of Mo5SiB2 Single Crystals
K. Ihara, K. Ito, K. Tanaka, M. Yamaguchi
Materials Science & Engineering A Vol. A329-331 p. 222-227 2002/09 Research paper (scientific journal)
Nb-Si-X(X:B,Cr,Al)系金属間化合物の放電プラズマ焼結-耐酸化性とコーティング被膜皮膜への応用
村上 敬、伊藤 和博、山口 正治
まてりあ Vol. 41 No. 6 p. 432-439 2002/06
High Temperature Deformation of T2 Single Crystals in Mo-Si-B System
K. Ito, K. Ihara, M. Fujikura, M. Yamaguchi
3rd International Symposium on Structural Intermetallics p. 441-448 2002/04 Research paper (international conference proceedings)
Oxidation Resistance of Spark Plasma Sintered Compactsin Nb-Si-Cr and Nb-Si-Al Systems
T. Murakami, S. Sasaki, K. Ichikawa, A. Kitahara, K. Ito, H. Inui, M. Yamaguchi
3rd International Symposium on Structural Intermetallics p. 581-589 2002/04 Research paper (international conference proceedings)
Complex macroscopic plastic flow arising from non-planar dislocation core structures
J. L. Bassani, K. Ito, V. Vitek
Materials Science and Engineering A Vol. 319-321 p. 97-101 2001/12 Research paper (scientific journal)
Beneficial effects of O-phase on the hydrogen absorption of Ti-Al-Nb alloys
L. T. Zhang, K. Ito, V. K. Vasudevan, M. Yamaguchi
Intermetallics Vol. 9 No. 12 p. 1045-1052 2001/12 Research paper (scientific journal)
Effects of Lattice Defects and Microstructures on Hydrogen Absorption/Desorption Properties in Some Intermetallic Compounds
H. Inui, K. Ito, L.T. Zhang, T. Yamamoto, M. Yamaguchi
Proceedings of Tenth International Symposium on Processing and Fabrication of Advanced Materials (PFAM-X) p. 131-140 2001/11 Research paper (international conference proceedings)
Stacking faults on (001) and their influence on the deformation and fracture behavior of single crystals of MoSi2-WSi2 solid-solutions with the C11b structure
H. Inui, K. Ito, T. Nakamoto, K. Ishikawa, M. Yamaguchi
Materials Science and Engineering A Vol. 314 No. 1-2 p. 31-38 2001/09/15 Research paper (scientific journal)
Physical and mechanical properties of single crystals of the T-2 phase in the Mo-Si-B system
K Ito, K Ihara, K Tanaka, M Fujikura, M Yamaguchi
INTERMETALLICS Vol. 9 No. 7 p. 591-602 2001/07 Research paper (scientific journal)
Multiphase and microstructure effects on the hydrogen absorption/desorption behavior of a Ti-22Al-27Nb alloy
K Ito, LT Zhang, VK Vasudevan, M Yamaguchi
ACTA MATERIALIA Vol. 49 No. 6 p. 963-972 2001/04 Research paper (scientific journal)
Hydrogen absorption and desorption in a B2 single-phase Ti–22Al–27Nb alloy before and after deformation
L.T. Zhang, K. Ito, V.K. Vasudevan, M. Yamaguchi
Acta Materialia Vol. 49 No. 5 p. 751-758 2001/03 Research paper (scientific journal)
Oxidation Behavior of Powder Compacts of the Nb-Al-Si System Prepared by Spark Plasma Sintering
T. Murakami, S. Sasaki, K. Ichikawa, A. Kitahara, K. Ito, H. Inui, M. Yamaguchi
Journal of Materials Processing Technology Vol. 117 No. 3 p. 1-9 2001 Research paper (scientific journal)
Molecularly imprinted polymers: New tailor-made materials for selective solid-phase extraction
L. T. Zhang, K. Ito, V. K. Vasudevan, M. Yamaguchi
TrAC - Trends in Analytical Chemistry Vol. 20 No. 9 p. 477-486 2001 Research paper (scientific journal)
Atomistic study of non-Schmid effects in the plastic yielding of bcc metals
K. Ito, V. Vitek
Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties Vol. 81 No. 5 p. 1387-1407 2001 Research paper (scientific journal)
Diffusion of Ge-71 in molybdenum disilicide
M Salamon, K Ito, M Yamaguchi, K Freitag, D Eversheim, H Mehrer
DIFFUSIONS IN MATERIALS: DIMAT2000, PTS 1 & 2 Vol. 194-1 p. 523-529 2001 Research paper (scientific journal)
Plastic Deformation of Single Crystals with the C11b Structure : Effect of the c/a Axial Ratio
K. Ito, H. Yoshioka, M. Yamaguchi
Materials Research Society Symposium Proceedings Vol. 646 p. N4.6.1-N4.6.6 2000/11 Research paper (international conference proceedings)
Ti3Al基合金における水素吸蔵とマルテンサイト変態の関連性
伊藤 和博
バウンダリー：材料開発ジャーナル Vol. 16 No. 9 p. 8-9 2000/09
水素吸蔵放出特性に及ぼす微細組織の効果 (第2回「21世紀の境界領域研究を考えるシンポジウム」)
伊藤 和博, Zhang L, 山口 正治
バウンダリ- Vol. 16 No. 9 p. 8-9 2000/09
Publisher: コンパス社
Diffusion of 71Ge in Molybdenum Disilicide
M. Salamon, K. Ito, M. Yamaguchi, K. Freitag, D. Eversheim, H. Mehrer
Fifth International Conference on Diffusion in Materials p. 521-592 2000/07 Research paper (international conference proceedings)
High-Temperature Structural Intermetallics
M. Yamaguchi, H. Inui, K. Ito
Acta Materialia Vol. 48 No. 1 p. 307-322 2000/01 Research paper (scientific journal)
Brittle-Ductile Behavior of Single Crystals of MoSi2
K. Ito, K. Matsuda, Y. Shirai, H. Inui, M. Yamaguchi
Materials Science & Engineering Vol. A261 p. 99-105 1999/03 Research paper (scientific journal)
Plastic deformation of single crystals of WSi2 with the C11b structure
K. Ito, T. Yano, T. Nakamoto, H. Inui, M. Yamaguchi
Acta Materialia Vol. 47 No. 3 p. 937-949 1999 Research paper (scientific journal)
Publisher: Elsevier Ltd
Structure and chemistry of planar defects in bulk and thin film MoSi2
Haruyuki Inui, Takashi Hashimoto, Ito Kazuhiro, Masaharu Yamaguchi, Masahiro Kawasaki
Journal of Electron Microscopy Vol. 48 No. 6 p. 689-700 1999 Research paper (international conference proceedings)
Publisher: Oxford University Press
Effect of Non-Glide Components of the Stress Tensor on Deformation Behavior of BCC Transition Metals
K. Ito, V. Vitek
Materials Research Society Symposium Proceedings Vol. 538 p. 87-92 1998/11 Research paper (international conference proceedings)
An atomistic study of segregation to lamellar interfaces in non-stoichiometric TiAl alloys
K. Ito, V. Vitek
Acta Materialia Vol. 46 No. 15 p. 5435-5446 1998/09/18 Research paper (scientific journal)
Publisher: Elsevier Ltd
Plastic Deformation of Single Crystals of Mo(Si,Al)2 with the C40 Structure
H. Inui, M. Moriwaki, K. Ito, M. Yamaguchi
Philosophical Magazine A Vol. 77 p. 375-394 1998/08 Research paper (scientific journal)
An Atomistic Study of Ti Segregation to Lamellar Interfaces in Ti-rich TiAl
K. Ito, V. Vitek
Materials Research Society Symposium Proceedings Vol. 492 p. 255-260 1997/12 Research paper (international conference proceedings)
Structure of Interfaces in the Lamellar TiAl: Effect of Directional Bonding and Segregation
V. Vitek, K. Ito, R. Siegl, S. Znam
Materials Science & Engineering Vol. A239-240 p. 752-760 1997/12 Research paper (scientific journal)
Plastic Deformation of Single Crystals of Transition Metal Disilicides
K. Ito, M. Moriwaki, T. Nakamoto, H. Inui, M. Yamaguchi
Materials Science & Engineering Vol. A233 No. 1/2/2020 p. 33-43 1997/08 Research paper (scientific journal)
Microstructure and Mechanical Properties of MoSi2 Single Crystals and Directionally Solidifed MoSi2-based Alloys
K. Ito, T. Yano, T. Nakamoto, M. Moriwaki, H. Inui, M. Yamaguchi
Progress in Materials Science Vol. 42 1997/04
Plastic deformation of single crystals of NbSi2 with the C40 structure
M. Moriwaki, K. Ito, H. Inui, M. Yamaguchi
Materials Science and Engineering A Vol. 239-240 No. 1-2 p. 69-74 1997 Research paper (scientific journal)
Publisher: Elsevier BV
Stacking Faults on (001) in Transition-Metal Disilicides with the C11b Structure
K. Ito, T. Nakamoto, H. Inui, M. Yamaguchi
Materials Research Society Symposium Proceedings Vol. 460 p. 599-604 1996/12 Research paper (international conference proceedings)
Plastic Deformation of Mo(Si,Al)2 Single Crystals with the C40 Structure
M. Moriwaki, K. Ito, H. Inui, M. Yamaguchi
Materials Research Society Symposium Proceedings Vol. 460 p. 605-610 1996/12 Research paper (international conference proceedings)
MoSi2と関連する遷移金属ダイシリサイド単結晶の変形
伊藤 和博
まてりあ Vol. 35 No. 10 p. 1102-1107 1996/10
Plastic deformation of MoSi2 and WSi2 single crystals and directionally solidified MoSi2-based alloys
Kazuhiro Ito, Takayuki Yano, Takayuki Nakamoto, Haruyuki Inui, Masaharu Yamaguchi
Intermetallics Vol. 4 No. 1 p. S119-S131 1996 Research paper (scientific journal)
Publisher: Elsevier Ltd
Plastic Deformation of MoSi2 Single Crystals
K. Ito, H. Inui, Y. Shirai, M. Yamaguchi
Philosophical Magazine A Vol. 72 No. 4 p. 1075-1097 1995/02 Research paper (scientific journal)
Transport properties of RInCu4 with C15b-type structure
H. Nakamura, A. Uenishi, K. Ito, M. Shiga, T. Kuwai, J. Sakurai
Journal of Magnetism and Magnetic Materials Vol. 140-144 No. 2 p. 923-924 1995 Research paper (scientific journal)
Unusual mass renormalization in FeSi studied by high-resolution photoemission
T Saitoh, A Sekiyama, T Mizokawa, A Fujimori, K Ito, H Nakamura, M Shiga
Solid State Communications Vol. 95 No. 5 p. 307-311 1995 Research paper (scientific journal)
Soft and Hard Modes of Deformation in MoSi2 Single Crystals
K. Ito, T. Yano, H. Inui, M. Yamaguchi
Materials Research Society Symposium Proceedings Vol. 364 p. 899-904 1994/11 Research paper (international conference proceedings)
SEMIMETALLIC BEHAVIOR OF YINCU4 AND LUINCU4
H NAKAMURA, K ITO, M SHIGA
JOURNAL OF PHYSICS-CONDENSED MATTER Vol. 6 No. 43 p. 9201-9210 1994/10 Research paper (scientific journal)
Mechanical Properties of High-Temperature Intermetallic Compounds
M. Yamaguchi, H. Inui, Y. Shirai, K. Kishida, K. Ito
Proceedings of the 10th International Conference on Strength of Materials (ICSMA-10) p. 33-40 1994/08 Research paper (international conference proceedings)
MAGNETIC AND TRANSPORT-PROPERTIES IN THE LOW-CARRIER SYSTEM GD1-XLUXINCU4
H NAKAMURA, K ITO, M SHIGA
JOURNAL OF PHYSICS-CONDENSED MATTER Vol. 6 No. 34 p. 6801-6813 1994/08 Research paper (scientific journal)
PLASTIC-DEFORMATION OF SINGLE AND POLYCRYSTALLINE COSI2
K ITO, H INUI, T HIRANO, M YAMAGUCHI
ACTA METALLURGICA ET MATERIALIA Vol. 42 No. 4 p. 1261-1271 1994/04 Research paper (scientific journal)
Silicide.From the viewpoint of ultrahigh-temperature structural material.
YAMAGUCHI MASAHARU, ITO KAZUHIRO
月刊新素材 Vol. 5 No. 4 1994/04
Anomalous Magnetism of the Frustrated Compound GdInCu4
H. Nakamura, K. Ito, M. Shiga
Physica B Vol. 186-188 p. 633-635 1993/05 Research paper (scientific journal)
Anomalous Transport and Thermal Properties of YInCu4
H. Nakamura, K. Ito, M. Shiga
Journal of the Physical Society of Japan Vol. 62 No. 5 p. 1446-1449 1993/04 Research paper (scientific journal)
Room Temperature Deformation of CoSi2 Single Crystals
K. Ito, H. Inui, T. Hirano, M. Yamaguchi
Materials Science & Engineering A Vol. 152 No. 1/2/2020 p. 153-159 1992/01 Research paper (scientific journal)
NiメッキCu合金コンタクトチップの高耐久化
伊藤 和博, HONG SEONG MIN, 武井 優子, 松田 夏芽, 野田 裕紀, 千星 聡
国際・産学連携インヴァースイノベーション材料創出プロジェクト（DEJI2MA）, 2025/02/03 Research paper, summary (national, other academic conference)
Fatigue-life Increase Resulting from Post-weld Tungsten Alloying into a Topmost Steel Joint Layer through Friction Stir Processing using a WC Tool
伊藤 和博
韓国金属学会秋の大会, Pyeongchang Alpensia Convention Centre 2024/10/28 Research paper, summary (national, other academic conference)
銅溶接金属中のカーボンナノチューブ分散状態に及ぼすTi添加の影響
濵名 菜々子, 山本 啓, 高橋 誠, 伊藤 和博
溶接学会 2024年度秋季全国大会, 北海道札幌市 2024/09 Research paper, summary (national, other academic conference)
交流パルスティグメルトラン溶接後のAA5052薄板断面溶込み形状に与える外部磁場の影響
岡田 賢治、Seong Min Hong、古免 久弥、田中 学、伊藤 和博
溶接学会秋季全国大会, 北海道 2024/06/09 Research paper, summary (national, other academic conference)
ワイヤアーク積層都度の電気パルス付与による引張残留応力の低減機構解明
渡邊 大翔、伊藤 和博、田中 努、A. S. Vishnu、Suryakumar S
溶接学会秋季全国大会, 北海道 2024/06/09 Research paper, summary (national, other academic conference)
超ハイテン鋼板の重ねすみ肉溶接における溶接ワイヤCr濃度と溶融池温度分布や物質流動の関係が止端部形状に及ぼす影響
星野 佑介, 伊藤 和博, Habib Hamed Zargari、小澤 俊平、戸田 要、鈴木 励一
溶接学会秋季全国大会, 北海道 2024/06/09 Research paper, summary (national, other academic conference)
交流パルスティグメルトラン溶接後のAA5052薄板断面溶込み形状に与える外部磁場の影響
岡田 賢治, HONG Seong Min, 古免 久弥, 田中 学, 伊藤 和博
2024溶接学会秋季全国大会, 2024/04/09 Research paper, summary (national, other academic conference)
銅溶接金属中へのカーボンナノチューブ添加の検討
濵名 菜々子, 山本 啓, 伊藤 和博
溶接学会 2024年度春季全国大会, 大阪府大阪市 2024/04 Research paper, summary (national, other academic conference)
超ハイテン鋼板のアーク溶接継手疲労強度向上に関する研究
星野 佑介, 小田 怜佳, 伊藤 和博, 山本 啓, Hong Seong Min, 戸田 要, 鈴木 励一
溶接学会 2024年度春季全国大会, 大阪府大阪市 2024/04 Research paper, summary (national, other academic conference)
Alloying of low-carbon steel surface due to friction stir processing with WC tool wear
Hajime Yamamoto, Yuji Yamamoto, Kazuhiro Ito, Yoshiki Mikami
The 3rd Materials Research Meeting (MRM2023) / The 24th IUMRS-International Conference in Asia (IUMRS-ICA2023), 京都 2023/12 Research paper, summary (international conference)
高炭素鋼薄板の端部レーザ溶接における凝固割れに関する数値シミュレーション
植村 幹太, Hong Seong Min, 三上 欣希, 伊藤 和博, 德永 仁寿, 富士本 博紀
2023年度秋季全国大会, 茨城県つくば市 2023/09 Research paper, summary (national, other academic conference)
Effect of Offset Distance on the Solidification Crack Initiation in the Carbon Steel Plate for the Melt-run Laser Welding
洪 聖旻, 植村 幹太, 三上 欣希, 德永 仁寿, 富士本 博紀, 伊藤 和博
2023年度秋季全国大会, 富山県富山市 2023/09 Research paper, summary (national, other academic conference)
加工誘起変態を起こすδフェライト含有γ系溶着金属の横膨出量と吸収エネルギーの関係
星野 佑介, 小田 怜佳, 伊藤 和博, 山本 啓, HONG Seong Min, 阿部 真弓, 鈴木 正道, 北川 良彦
2023年度秋季全国大会, 富山県富山市 2023/09 Research paper, summary (national, other academic conference)
摩擦攪拌プロセス中の荷重低減とそのWCツール元素固溶量への影響
山本 啓, 柳 悠輔, 伊藤 和博
日本金属学会 2023年秋期(第173回)講演大会, 富山県富山市 2023/09 Research paper, summary (national, other academic conference)
加工誘起変態を起こすδフェライト含有γ系溶着金属の横膨出量と吸収エネルギーの関係
星野 佑介, 小田 怜佳, 伊藤 和博, 山本 啓, Hong Seong Min, 阿部 真弓, 鈴木 正道, 北川 良彦
2023年度溶接学会秋季全国大会, 富山県富山市 2023/09 Research paper, summary (national, other academic conference)
摩擦攪拌プロセス中の荷重低減とそのWCツール元素固溶量への影響
柳 悠輔, 山本 啓, 伊藤 和博
2023年度溶接学会秋季全国大会, 富山県富山市 2023/09 Research paper, summary (national, other academic conference)
Low-temperature Toughness Increase for Austenitic Stainless Steel Weld Metal for Cryogenic Use
Hirofumi Maniwa, Mayumi Abe, Masamichi Suzuki, Yoshihiko Kitagawa, Yusuke Hoshino, Reika Oda, Hajime Yamamoto, Seong Min Hong, Kazuhiro Ito
International Institute of Welding Annual Assembly 2023, Singapore 2023/07 Research paper, summary (international conference)
Adapted to generate compressive residual stress and retained austenite in a steel surface layer by friction stir processing with the WC tool
Hajime Yamamoto, Yuji Yamamoto, Kazuhiro Ito, Yoshiki Mikami
The 76th IIW Annual Assembly and International Conference on Welding and Joining, Singapore 2023/07 Research paper, summary (international conference)
オーステナイト系ステンレス鋼溶接金属の極低温じん性向上に寄与する因子の検討
星野 佑介, 小田 怜佳, Seong Min Hong, 山本 啓, 伊藤 和博, 馬庭 啓史, 阿部 真弓, 鈴木 正道, 北川 良彦
2023年度春季全国大会, online 2023/04 Research paper, summary (national, other academic conference)
オーステナイト系ステンレス鋼溶接金属の極低温じん性向上に寄与する因子の検討
星野 佑介, 小田 怜佳, Seong Min Hong, 山本 啓, 伊藤 和博, 馬庭 啓史, 阿部 真弓, 鈴木 正道, 北川 良彦
溶接学会春季全国大会, online 2023/04 Research paper, summary (national, other academic conference)
Surface alloying due to WC tool wear during FSP and its effects on the microstructure and mechanical properties of topmost steel layer
Hajime Yamamoto, Yudai Imagawa, Yuji Yamamoto, Kazuhiro Ito
TMS 2023 152nd Annual Meeting & Exhibition, San Diego, California, USA 2023/03 Research paper, summary (international conference)
WCツール摩擦攪拌プロセス施工面における疲労き裂進展速度に及ぼす残留γの影響
山本 啓, 山元 優士, 伊藤 和博
日本金属学会 2023年春期(第172回)講演大会, 東京都目黒区 2023/03 Research paper, summary (national, other academic conference)
Strengthening of Al/Cu Dissimilar Joint due to Complicated Interface Produced by Pulsed TIG Welding with a Constricted Nozzle
Yusuke YANAGI, Hajime YAMAMOTO, Kazuhiro ITO, Hisaya KOMEN, Manabu TANAKA, Akihisa MURATA
VisualJW2022, 千里ライフサイエンスセンター 2022/10 Research paper, summary (international conference)
Effect of deformation-induced martensitic transformation on low-temperature tougheness in delta ferrite-containing austenitic stainless steel weld metals
Reika Oda, Hajime Yamamoto, Kazuhiro Ito, Hirofumi Maniwa, Yoshihiko Kitagawa, Hirohisa Watanabe
VisualJW2022, 千里ライフサイエンスセンター 2022/10 Research paper, summary (international conference)
Post Weld Tungsten Alloying in a Topmost Steel Layer through Friction Stir Processing using a WC tool
Kazuhiro ITO, Hajime YAMAMOTO, Yoshiki MIKAMI, Makoto TAKAHASHI
VisualJW2022, 千里ライフサイエンスセンター 2022/10 Research paper, summary (international conference)
Effect of the Direction of Additional Underneath Magnetic Field on the Weldability of Dissimilar Materials (GI Steel - Aluminum Alloy) Joints in AC Pulse GMAW
HONG SEONG MIN, Shinichi Tashiro, Manabu Tanaka, Kazuhiro Ito
Visual-JW 2022 & DEJI2MA 2022, 大阪 2022/10 Research paper, summary (international conference)
Directional Effect of Additionally Applied Underneath Magnetic Field on Joining Process of Al Alloy to GI steel in AC Pulse GMAW
HONG SEONG MIN, Shinichi Tashiro, Manabu Tanaka, Kazuhiro Ito
IWJC 2022, Jeju, Republic of Korea 2022/10 Research paper, summary (international conference)
オーステナイト系ステンレス鋼溶接金属の極低温じん性向上に寄与する因子の検討
星野 佑介, 小田 怜佳, Hong Seong Min, 山本 啓, 伊藤 和博, 馬庭 啓史, 阿部 真弓, 鈴木 正道, 北川 良彦
2023年度溶接学会春季全国大会, WEB開催 2022/09 Research paper, summary (national, other academic conference)
WCツール摩擦攪拌プロセスにより生成された残留γの疲労き裂進展抵抗への寄与
山本 啓, 山元 優士, 伊藤 和博
2023年度溶接学会春季全国大会, WEB開催 2022/09 Research paper, summary (national, other academic conference)
二相ステンレス鋼溶接金属の三次元組織モデルによる水素拡散・集積挙動の数値シミュレーション
植村 幹太, 三上 欣希, 伊藤 和博
（一社）溶接学会 2022年度 秋季全国大会, 島根県松江市 2022/09 Research paper, summary (national, other academic conference)
Effect of Additional Underneath Magnetic Field Direction on Fe-Al IMC Layer Distribution and Weldability of Aluminum Alloy to GI Steel Joints in AC Pulse GMAW
HONG SEONG MIN, 田代 真一, 田中 学, 伊藤 和博
2022年度秋季全国大会, 松江 2022/09 Research paper, summary (national, other academic conference)
WCツール摩擦攪拌プロセスにより鋼表層に生じる圧縮残留応力と残留オーステナイト
山本 啓, 山元優士, 伊藤和博, 三上欣希
公益社団法人 日本金属学会 2022年秋期(第171回)講演大会, 福岡県福岡市 2022/09 Research paper, summary (national, other academic conference)
オーステナイト系ステンレス鋼溶接金属の加工誘起マルテンサイト変態による極低温じん性増加に及ぼすMn量の影響
小田怜佳, 山本 啓, 伊藤和博, 馬庭啓史, 北川良彦, 渡邉博久
一般社団法人 溶接学会 2022年度秋季全国大会, 島根県松江市 2022/09 Research paper, summary (national, other academic conference)
WCツール摩擦攪拌プロセスによる鋼表層への圧縮残留応力と残留オーステナイトの付与
柳 悠輔, 山元優士, 山本 啓, 伊藤和博, 三上欣希
一般社団法人 溶接学会 2022年度秋季全国大会, 島根県松江市 2022/09 Research paper, summary (national, other academic conference)
Toughening due to deformation induced martensitic transformation in delta ferrite-containing austenitic stainless steel weld metals
Hajime Yamamoto, Reika Oda, Kazuhiro Ito, Hirofumi Maniwa, Yoshihiko Kitagawa, Hirohisa Watanabe
The 75th IIW Assembly & International Conference, 東京 2022/07 Research paper, summary (international conference)
Toughening due to deformation induced martensitic transformation in delta ferrite-containing austenitic stainless steel weld metals
Hajime Yamamoto, Reika Oda, Kazuhiro Ito, Hirofumi Maniwa, Yoshihiko Kitagawa, Hirohisa Watanabe
IIW-IX, On line 2022/03 Research paper, summary (international conference)
Experimental study on improving the additively manufactured GMAW and TIG beads using FSP
M. Imam, S. N. S. H. Chittajallu, H. Gururani, H. Yamamoto, K. Ito, P. K. Parchuri, R. Mishra, A. Sharma, A. Richhariya, V. Chinthapent
Int. Conf. on Materials, Mechanics & Modelling 2021 (ICMMM-2021), Online 2022/03 Research paper, summary (international conference)
破壊靭性試験における残留応力緩和処理による材料損傷挙動の結晶塑性論的検討
三上 欣希, 中尾 俊貴, 伊藤 和博, 川畑 友弥
第240回 溶接構造研究委員会, オンライン開催 2022/03 Research paper, summary (national, other academic conference)
二相ステンレス鋼溶接部における水素割れに及ぼす微視組織形態の影響に関する検討
三上 欣希, 伊藤 和博
（一社）日本機械学会 M&M2021 材料力学カンファレンス, 名古屋大学 東山キャンパス（オンライン開催） 2021/09 Research paper, summary (national, other academic conference)
溶接部破壊靭性試験における負荷履歴の微視的影響に関する結晶塑性解析
三上 欣希, 伊藤 和博, 中尾 俊貴, 川畑 友弥
（一社）日本鉄鋼協会 第182回秋季講演大会, オンライン開催 2021/09 Research paper, summary (national, other academic conference)
破壊靭性試験における予ひずみの影響の結晶塑性解析による基礎的検討
中尾 俊貴, 三上 欣希, 伊藤 和博, 川畑 友弥
（一社）溶接学会 2021年度 秋季全国大会, WEB開催 2021/09 Research paper, summary (national, other academic conference)
摩擦攪拌プロセス施工鋼表層の残留応力とWCツール構成元素固溶量との関係
山元 優士, 山本 啓, 伊藤 和博, 三上 欣希
（一社）溶接学会 2021年度 秋季全国大会, WEB開催 2021/09 Research paper, summary (national, other academic conference)
摩擦攪拌プロセス施工鋼表層のWCツール構成元素固溶量に及ぼす鋼化学成分の影響
小田 怜佳, 山本 啓, 伊藤 和博, 高橋 誠
（一社）溶接学会 2021年度 秋季全国大会, WEB開催 2021/09 Research paper, summary (national, other academic conference)
Al/Cu異材薄板の狭窄TIG溶接
山本 啓, 伊藤 和博, 高橋 誠, 田中 学, ヌエン ヴァン アン, 村田 彰久
（一社）溶接学会 2021年度 秋季全国大会, WEB開催 2021/09 Research paper, summary (national, other academic conference)
Al/Cu異材薄板の狭窄TIG溶接
山本 啓, 伊藤 和博, 高橋 誠, 田中 学, ヌエン ヴァン アン, 村田 彰久
（公社）日本金属学会 2021年秋期 第169回講演大会, WEB開催 2021/09 Research paper, summary (national, other academic conference)
Feature of microstructure and its formation mechanism in a newly developed electro slag welding
Tomonori Kakizaki, Shodai Koga, Hajime Yamamoto, Yoshiki Mikami, Kazuhiro Ito, Kei Yamazaki, Shuji Sasakura, Hirohisa Watanabe
The 74th IIW on-line Assembly & International Conference, on line 2021/07 Research paper, summary (international conference)
摩擦攪拌プロセスによるWCツール構成元素の鋼中固溶機構
山本 啓, 今川 雄大, 伊藤 和博
（一社）溶接学会 2021年度 春季全国大会, WEB開催 2021/04 Research paper, summary (national, other academic conference)
摩擦攪拌プロセスによるWCツール構成元素の鋼中固溶機構
山本 啓, 今川 雄大, 伊藤 和博
（公社）日本金属学会 2021年春期 第168回講演大会, オンライン開催 2021/03 Research paper, summary (national, other academic conference)
Feature of Microstructure and its Formation Mechanism in a Newly Developed Electro Slag Welding
T. Kakizaki, S. Koga, H. Yamamoto, Y. Mikami, K. Ito, K. Yamazaki, S. Sasakura, H. Watanabe
IIW-IX, On line 2021/03 Research paper, summary (international conference)
Investigation of WC-tool-component solution mechanism arose in a steel surface layer during friction stir processing
H. Yamamoto, Y. Imagawa, K. Ito
IIW-IX, On line 2021/03 Research paper, summary (international conference)
極低温時の高導電率を低下させないための超高純度アルミニウム薄板の摩擦攪拌接合
山本 啓, 青山 雄亮, 伊藤 和博, 山田 哲生, 田中 学, 星河 浩介, 永田 章, 熊谷 俊昭
（公社）日本金属学会 2020年秋期 第167回講演大会, オンライン開催 2020/09 Research paper, summary (national, other academic conference)
極低温時の高導電率を低下させないための超高純度アルミニウム薄板の摩擦攪拌接合
山本 啓, 青山 雄亮, 伊藤 和博, 山田 哲生, 田中 学, 星河 浩介, 永田 章, 熊谷 俊昭
（一社）溶接学会 2020年度 秋季全国大会, WEB開催 2020/09 Research paper, summary (national, other academic conference)
エレクトロスラグ及びエレクトロガスアーク溶接における溶接金属中のアシキュラーフェライト量に及ぼすプロセス因子の影響
古賀 将大, 山本 啓, 伊藤 和博, 柿崎 智紀, 山崎 圭, 笹倉 秀司, 渡邉 博久
（一社）溶接学会 2020年度 秋季全国大会, WEB開催 2020/09 Research paper, summary (national, other academic conference)
抵抗スポット溶接部のたがね試験における力学的挙動の数値シミュレーション
三上 欣希, 天野 剛志, 吉野 鋭, 伊藤 和博
（一社）溶接学会 2020年度 秋季全国大会, WEB開催 2020/09 Research paper, summary (national, other academic conference)
Numerical Study of Material Flow in a Molten Pool of the Workpiece Vibration Assisted Welding
Habib Hamed Zargari, Kazuhiro Ito, Abhay Sharma
International Institute of Welding (Commission III Annual Assembly 2020 online), On line 2020/07 Research paper, summary (international conference)
W alloying due to WC tool wear during friction stir processing for fatigue strength improvement of high-strength low-alloy steel joints
Shodai Koga, Hajime Yamamoto, Kazuhiro Ito, Makoto Takahashi, Yoshiki Mikami, Hidetoshi Fujii
Visual-JW 2019 & WSE 2019, Osaka, Japan 2019/11 Research paper, summary (international conference)
Travel distance of stable WC-tool-wear related W alloying varying with friction stir processing parameters on low-carbon steel plates
Yudai Imagawa, Hajime Yamamoto, Kazuhiro Ito
Visual-JW 2019 & WSE 2019, Osaka, Japan 2019/11 Research paper, summary (international conference)
Direct application of friction stir processing to weld toes of high-strength low-alloy steel joints
Hajime Yamamoto, Yoshikazu Danno, Kazuhiro Ito, Yoshiki Mikami, Hidetoshi Fujii
International Conference on Materials and Systems for Sustainability 2019 (ICMaSS2019), Nagoya, Japan 2019/11 Research paper, summary (international conference)
Simplified analysis of welding heat conduction behavior utilized neural network technique
Houichi KITANO, Yoshiki MIKAMI, Kazuhiro ITO
Visual-JW 2019 & WSE 2019, Osaka, Japan 2019/11 Research paper, summary (international conference)
Effect of grain boundary geometry on opening and sliding behavior in ni-base alloy weld metal
Takumi OKUDA, Keisuke TORIGATA, Daisuke ABE, Yoshiki MIKAMI, Kazuhiro ITO
Visual-JW 2019 & WSE 2019, Osaka, Japan 2019/11 Research paper, summary (international conference)
Numerical simulation of deformation behavior during chisel testing of resistance spot welds of high-strength steel
Takuya OTSUKA, Yoshiki MIKAMI, Kazuhiro ITO
Visual-JW 2019 & WSE 2019, Osaka, Japan 2019/11 Research paper, summary (international conference)
A unique CEL numerical method on material flow in a molten pool of workpiece vibration assisted welding
Habib Hamed Zargari, Kazuhiro Ito, Yoshiki Mikami, Abhay Sharma
Visual-JW 2019 & WSE 2019, Osaka, Japan 2019/11 Research paper, summary (international conference)
Weld toe modification using friction stir processing for fatigue strength improvement of high-strength low-alloy steel joints
Hajime Yamamoto, Yoshikazu Danno, Kazuhiro Ito, Yoshiki Mikami, Hidetoshi Fujii
International Symposium on Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development Satellite (iLIM-s), Nagoya, Japan 2019/11 Research paper, summary (international conference)
W alloying due to WC tool wear during friction stir processing for fatigue strength improvement of high-strength low-alloy steel joints
Shodai Koga, Hajime Yamamoto, Kazuhiro Ito, Makoto Takahashi, Yoshiki Mikami, Hidetoshi Fujii
The 4th International Symposium on Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development (iLIM-4), Sendai, Japan 2019/10 Research paper, summary (international conference)
摩擦攪拌プロセスによるWCツール構成元素の低炭素鋼表面への供給とその組織形成に及ぼすツール摩耗挙動の影響
今川 雄大, 山本 啓, 伊藤 和博, 三上 欣希, 藤井 英俊
（一社）溶接学会 2019年度 秋季全国大会, 仙台 2019/09 Research paper, summary (national, other academic conference)
A summary on microstructural features and mechanical properties of explosive welded group V, VI refractory metals Cu clads
Pradeep Kumar Parchuri, Shota Kotegawa, Kazuhiro Ito, Hajime Yamamoto, Akihisa Mori, Kazuyuki Hokamoto
2019/09 Research paper, summary (national, other academic conference)
摩擦攪拌プロセスによるWCツール構成元素の低炭素鋼表面への供給とその組織形成に及ぼすツール摩耗挙動の影響
今川 雄大, 山本 啓, 伊藤 和博, 三上 欣希, 藤井 英俊
日本金属学会 2019年秋期(第165回)講演大会, 岡山 2019/09 Research paper, summary (national, other academic conference)
The benefits of workpiece vibration in tandem pulsed gas metal arc welding
Habib Hamed Zargari, Kazuhiro Ito, Pradeep Kumar Parchuri, Hajime Yamamoto, Manish Kumar, Abhay Sharma
2019/09 Research paper, summary (national, other academic conference)
二相ステンレス鋼の微視組織を考慮した水素割れ発生特性の検討
三上 欣希, 伊藤 和博, 松本 幸樹, 荻田 玄, 望月 正人
（一社）溶接学会 2019年度 秋季全国大会, 仙台 2019/09 Research paper, summary (national, other academic conference)
微視的応力および拡散性水素濃度分布を考慮した二相ステンレス鋼の水素割れ発生特性の検討
三上 欣希, 伊藤 和博, 松本 幸樹, 望月 正人
（一社）日本鉄鋼協会 第178回秋季講演大会, 岡山 2019/09 Research paper, summary (national, other academic conference)
二相ステンレス鋼溶接金属の水素割れに及ぼす微視組織形態の影響に関する数値解析的検討
三上 欣希, 伊藤 和博, 松本 幸樹, 望月 正人
（一社）日本鉄鋼協会 第178回秋季講演大会, 岡山 2019/09 Research paper, summary (national, other academic conference)
Fundamental study on the SiO2 growth mechanism of electronegativity difference of Metal-O in the high-k underlayers by PE-ALD method
Erika Maeda, Toshihide Nabatame, Masafumi Hirose, Mari Inoue, Akihiko Ohi, Naoki Ikeda, Makoto Takahashi, Kazuhiro Ito, and Hajime Kiyono
ALD2019, Washington, USA 2019/07 Research paper, summary (international conference)
Effects of workpiece-vibration on penetration shape change of MAG welds
Kazuhiro Ito, Habib Hamed Zargari, Hajime Yamamoto, Tuyoshi MIwa, Pradeep Kumar Parchuri, Manish Kumar, Abhay Sharma
The 72nd IIW Annual Assembly and Int. Conf, Bratislava, Slovakia 2019/07 Research paper, summary (international conference)
高強度低合金鋼溶接継手止端部への摩擦攪拌プロセスにおける施工条件と疲労強度改善の関係
古賀 将大, 山本 啓, 伊藤 和博, 三上 欣希, 藤井 英俊
（一社）溶接学会 平成31年度春季全国大会, 東京 2019/04 Research paper, summary (national, other academic conference)
Mo/Cu爆発圧接クラッド材の曲げ強度と接合界面の関係
Pradeep Kumar Parchuri, 古手川 将大, 山本 啓, 伊藤 和博, 森 昭寿, 田中 茂, 外本 和幸
（一社）溶接学会 平成31年度春季全国大会, 東京 2019/04 Research paper, summary (national, other academic conference)
WCツールを用いた摩擦攪拌プロセスによる表面改質と機能性向上
伊藤 和博, 山本 啓, 段野 芳和
（公社）日本金属学会 2019年春期大会, 東京 2019/03 Research paper, summary (national, other academic conference)
Direct application of friction stir processing to weld toes of high-strength low-alloy steel joints
Hajime Yamamoto, Yoshikazu Danno, Kazuhiro Ito, Yoshiki Mikami, Hidetoshi Fujii
TMS 2019 148th Annual Meeting & Exhibition, San Antonio, Texas, USA 2019/03 Research paper, summary (international conference)
複相組織を有する高強度薄鋼板の水素割れ発生特性
三上 欣希, 伊藤 和博, 田口 雄大, 望月 正人, 岡野 拓史, 石川 信行
一般社団法人日本鉄鋼協会 第176回秋季講演大会, 東京 2019/03 Research paper, summary (national, other academic conference)
高強度低合金鋼溶接継手止端部への摩擦攪拌プロセスにおける施工条件と疲労強度改善の関係
山本 啓、古賀 将大、伊藤 和博、三上 欣希、藤井 英俊
（公社）日本金属学会 2019年春期大会, 東京 2019/03 Research paper, summary (national, other academic conference)
Workpiece Vibration in MAG Welding for the Benefit of Penetration Shape Change
Habib Hamed Zargari, Kazuhiro Ito, Pradeep Kumar Parchuri, Manishi Kumar, Abhay Sharma
2019/03 Research paper, summary (national, other academic conference)
Characterization of bending strength and interface microstructure in Mo/Cu explosive clads
2019/03 Research paper, summary (national, other academic conference)
二相ステンレス鋼母材および溶接金属水素割れ発生特性評価
松本 幸樹, 荻田 玄, 三上 欣希, 伊藤 和博
一般社団法人日本鉄鋼協会 第176回秋季講演大会, 仙台 2018/09 Research paper, summary (national, other academic conference)
Workpiece Vibration in Twin-wire MAG Welding for the Benefit of Penetration Shape Change
Habib Hamed Zargari, Kazuhiro Ito, Hajime Yamamoto, Pradeep Kumar Parchuri, Abhay Sharma
2018/09 Research paper, summary (national, other academic conference)
Variation in the bending strength with collision velocity in W/Cu explosive welds
2018/09 Research paper, summary (national, other academic conference)
摩擦溶接したAl-Cuの界面に発生する金属間化合物の成長挙動に関する研究
Ji-Hyeon Lee, Gi-Yeong Kim, Seong-Hyeon Park, Jae Kwon-Kim, Myung-Hoon Oh, Kazuhiro Ito
（一社）溶接学会 平成29年秋季全国大会, 東京 2018/09 Research paper, summary (national, other academic conference)
TiAl-insert metal-SCM440の摩擦接合の際摩擦条件がIMC(Intermetallic compound)層に及ぼす影響
Jae-Kwon Kim, Jong-Moon Park, Sung-Hyun Park, 伊藤 和博
（一社）溶接学会 平成29年秋季全国大会, 東京 2018/09 Research paper, summary (national, other academic conference)
Si-Al混合紛ペーストを用いたSiC-CMC材の1150℃での接合
百合 一馬, 伊藤 和博, 坂元 理絵, 篠原 貴彦
（一社）溶接学会 平成29年秋季全国大会, 東京 2018/09 Research paper, summary (national, other academic conference)
爆発圧接したW/Cu接合体の曲げ特性と爆発圧接時の衝突速度との関係
古手川 将大, Parchuri Pradeep Kumar, 伊藤 和博, 山本 啓, 田中 茂, 外本 和幸
（一社）溶接学会 平成29年秋季全国大会, 東京 2018/09 Research paper, summary (national, other academic conference)
Superior mechanical strength of an intermediate layer interface over conventional wavy interfaces in (Nb or Ta)/Cu explosive welding joints
Pradeep Kumar PARCHURI, Shota KOTEGAWA, Hajime YAMAMOTO, Kazuhiro ITO, Kazuyuki HOKAMOTO
71st IIW Annual Assembly and Int. Conf, Bali, Indonesia 2018/07 Research paper, summary (international conference)
Metallurgical Characterization of Penetration Shape Change in Twin-wire MAG Welds using Workpiece-vibration
Kazuhiro Ito, Hajime Yamamoto, Pradeep Kumar Parchuri, Abhay Sharma, Habib Hamed Zargari
71st IIW Annual Assembly and Int. Conf, Bali, Indonesia 2018/07 Research paper, summary (international conference)
球面先端形状ツールを用いた摩擦攪拌プロセスによる低炭素鋼溶接余盛止端部組織と形状の改善およびそれらの疲労強度への効果
山本 啓, 段野 芳和, 伊藤 和博, 三上 欣希, 藤井 英俊
（一社）溶接学会 平成30年度春季全国大会, 東京 2018/04 Research paper, summary (national, other academic conference)
水中衝撃波を用いた異材接合における界面近傍の温度場シミュレーション
三上 欣希, PARCHURI Pradeep Kumar, 伊藤 和博, 外本 和幸
一般社団法人 溶接学会 平成30年度春季全国大会, 東京 2018/04 Research paper, summary (national, other academic conference)
衝突速度と音速との関係が爆発圧接したRMs/Cu界面形状およびその機械的特性に与える影響
Parchuri Pradeep Kumar, 古手川 将大, 山本 啓, 伊藤 和博, 外本 和幸
（一社）溶接学会 平成29年秋春季全国大会, 東京 2018/04 Research paper, summary (national, other academic conference)
A study on characteristics of explosively welded RMs/Cu joints at different relationship between horizontal-collision and sonic velocities
2018/03 Research paper, summary (national, other academic conference)
球面先端形状ツールを用いた摩擦攪拌プロセスによる低炭素鋼溶接余盛止端部の組織および形状改善と疲労強度に及ぼす影響
山本 啓, 段野 芳和, 伊藤 和博, 三上 欣希, 藤井 英俊
（公社）日本金属学会 2019年春期大会, 千葉 2018/03 Research paper, summary (national, other academic conference)
レーザ溶接によるAl合金とMg合金の異材接合
松本 幸樹, 永塚 公彬, 伊藤 和博, 塚本 雅裕, 中田 一博, 西本 明生, 石川 武
溶接学会平成29年度秋期全国大会, 福岡 2017/09 Research paper, summary (national, other academic conference)
レーザ溶接によるAl合金とMg合金の異材接合
松本 幸樹, 西本 明生, 永塚 公彬, 石川 武, 伊藤 和博, 塚本 雅裕, 中田 一博
日本金属学会 2017年秋期(第161会)講演大会, 北海道 2017/09 Research paper, summary (national, other academic conference)
6063Al合金摩擦攪拌接合部の機械的特性に及ぼす接合入熱の影響
趙 天波, 佐藤 裕, 粉川 博之, 伊藤 和博
（一社）溶接学会 平成29年秋春季全国大会, 福岡 2017/09 Research paper, summary (national, other academic conference)
過剰応力下低合金鋼での亜鉛脆化割れに及ぼす熱影響部組織・引張応力・溶融亜鉛温度の影響
武藤 宏, 伊藤 和博, 山本 啓, 段野 芳和
（一社）溶接学会 平成29年秋春季全国大会, 福岡 2017/09 Research paper, summary (national, other academic conference)
放電プラズマ焼結装置を用いたTiAl合金と鋼の直接通電加熱接合
西端 惇, 小濱 和之, 伊藤 和博, 江川 相輝
（一社）溶接学会 平成29年秋春季全国大会, 福岡 2017/09 Research paper, summary (national, other academic conference)
Correlation between thermo-physical property to microstructure evolution of underwater explosive welds of Mo/Cu and W/Cu
2017/09 Research paper, summary (national, other academic conference)
余盛止端部への摩擦攪拌プロセスの適用とその疲労強度改善効果
段野 芳和, 山本 啓, 伊藤 和博, 三上 欣希, 小濱 和之
（一社）溶接学会 平成29年秋春季全国大会, 福岡 2017/09 Research paper, summary (national, other academic conference)
タンデムマグ溶接における溶融池内での溶滴流動に及ぼす被溶接材振動の影響
山本 啓, 伊藤 和博, 三輪 剛士, Parchuri Pradeep Kumar, Sharma Abhay
（一社）溶接学会 平成29年秋春季全国大会, 福岡 2017/09 Research paper, summary (national, other academic conference)
放電プラズマ焼結装置を用いた直接通電加熱によるTiAl合金/鋼の拡散接合
小濱 和之, 西端 惇, 伊藤 和博, 江川 相輝
（公社）日本金属学会 2018年秋期大会, 北海道 2017/09 Research paper, summary (national, other academic conference)
Variation in bending strength and interface morphology of underwater explosive welded RM/Cu joints
2017/09 Research paper, summary (national, other academic conference)
溶接余盛止端部への直接摩擦攪拌プロセスが疲労強度へ及ぼす効果
段野 芳和, 山本 啓, 伊藤 和博, 三上 欣希, 小濱 和之
（公社）日本金属学会 2018年秋期大会, 北海道 2017/09 Research paper, summary (national, other academic conference)
タンデムマグ溶接における溶融池内での溶滴流動に及ぼす被溶接材振動の影響
山本 啓, 伊藤 和博, 三輪 剛士, Parchuri Pradeep Kumar, Sharma Abhay
（公社）日本金属学会 2018年秋期大会, 北海道 2017/09 Research paper, summary (national, other academic conference)
Si/Al混合粉末ろう材のAl蒸発による等温凝固を用いたSiCの低温接合
小濱 和之, 寺田 俊一, 伊藤 和博, 山本 啓, 篠原 貴彦、坂元 理絵
（一社）溶接学会 平成29年度春季全国大会, 東京 2017/04 Research paper, summary (national, other academic conference)
水中衝撃波を用いた第５族高融点金属と銅との異材接合界面評価
古手川 将大, 山本 啓, Parchuri Pradeep Kumar, 伊藤 和博, 外本 和幸
（一社）溶接学会 平成29年度春季全国大会, 東京 2017/04 Research paper, summary (national, other academic conference)
摩擦攪拌プロセスにより微細化された高張力鋼溶接部組織のシャルピー吸収エネルギー
山本 啓, 段野 芳和, 伊藤 和博, 小濱 和之, 藤井 英俊
（一社）溶接学会 平成29年度春季全国大会, 東京 2017/04 Research paper, summary (national, other academic conference)
共晶系Si-Alろう材のAl蒸発による等温凝固を用いたSiCの低温接合
小濱 和之, 寺田 俊一, 伊藤 和博, 山本 啓
（公社）日本金属学会 2017年春期大会, 東京 2017/03 Research paper, summary (national, other academic conference)
Characterization of dissimilar bonding of Cu to Ta and Nb by the underwater explosive welding
2017/03 Research paper, summary (national, other academic conference)
摩擦攪拌プロセスにより微細化された高張力鋼溶接熱影響部組織のシャルピー衝撃値
山本 啓, 段野 芳和, 伊藤 和博, 小濱 和之, 藤井 英俊
（公社）日本金属学会 2017年春期大会, 東京 2017/03 Research paper, summary (national, other academic conference)
Fatigue-Strength Increase by Friction Stir Processing between different strength grades of Butt-Welded High-Tensile Steels
Hajime Yamamoto, Kazuhiro Ito, Makoto Takahashi, Kazuyuki Kohama, Hidetoshi Fujii
2017 TMS Annual Meeting & Exhibition, SanDiego, USA 2017/02 Research paper, summary (international conference)
Dissimilar Joint Formation of SUS304 / CFRTP by Friction Lap Joining
Tsuyoshi MIWA, Daiki KITAGAWA, Kimiaki NAGATSUKA, Kazuhiro ITO, Kazuhiro NAKATA, Hiroto YAMAOKA
The International Symposium on Visualization in Joining & Welding Science through Advanced Measurements and Simulation (Visual-JW2016), Osaka, Japan 2016/10 Research paper, summary (international conference)
SiC/SiC Joint Formation by Diffusion Bonding Using Paste-Like Si Powder for High-Temperature Application
Shunichi TERADA, Kazuyuki KOHAMA, Kazuhiro ITO, Soshu KIRIHARA
The International Symposium on Visualization in Joining & Welding Science through Advanced Measurements and Simulation (Visual-JW2016), Osaka, Japan 2016/10 Research paper, summary (international conference)
Effects of Surface-Microstructural Modification on Fatigue Strength of High Tensile Steel Welds by Friction Stir Processing
Hajime YAMAMOTO, Kazuhiro ITO, Makoto TAKAHASHI, Kazuyuki KOHAMA, Hidetoshi FUJII
The International Symposium on Visualization in Joining & Welding Science through Advanced Measurements and Simulation (Visual-JW2016), Osaka, Japan 2016/10 Research paper, summary (international conference)
Interface-Microstructure Characterization of Dissimilar Joints between Group 5 Refractory Metals and Copper Produced by Underwater Explosive Welding
Shota KOTEGAWA, Hajime YAMAMOTO, Kazuhiro ITO, Kazuyuki HOKAMOTO
The International Symposium on Visualization in Joining & Welding Science through Advanced Measurements and Simulation (Visual-JW2016), Osaka, Japan 2016/10 Research paper, summary (international conference)
Fracture Toughness Increase by Friction-Stir-Processing Microstructure Modification in TIG-welds of SS400 Steels
Kazuhiro ITO, Hiroki IZUMI, Hajime YAMAMOTO, Makoto TAKAHASHI, Kazuyuki KOHAMA, Yoshikazu DANNO, Hidetoshi FUJII
The 1st International Symposium on Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development (iLIM-1), Osaka, Japan 2016/10 Research paper, summary (international conference)
多孔質マイクロ球状粒子の自発的生成挙動の高温その場観察
鈴木 義和, 阿部 浩也, 山本 啓, 伊藤 和博, 井上 裕滋, 中村 誠友己
日本セラミックス協会 第29回秋季シンポジウム, 東広島 2016/09 Research paper, summary (national, other academic conference)
低入熱摩擦攪拌プロセスによる極薄セメンタイト膜に包まれた超微細フェライト粒組織の形成とシャルピー吸収エネルギーの増加
伊藤 和博, 和泉 博貴, 山本 啓, 高橋 誠, 小濱 和之, 藤井 英俊
（公社）日本金属学会 2016年秋期講演大会, 大阪 2016/09 Research paper, summary (national, other academic conference)
Diffusion Bonding of SiC with Si Powder Application for High-Temperature Resistant Joint
Kazuyuki Kohama, Shunichi Terada, Kazuhiro Ito, Soshu Kirihara
The 6th East Asia Symposium on Technology of Welding and Joining, Incheon, Korea 2016/09 Research paper, summary (international conference)
Si微粒子とAlの混合インサート材によるSiCの低温接合と接合部再溶融温度の高温維持
寺田 俊一, 小濱 和之, 伊藤 和博
（公社）日本金属学会 2016年秋期大会, 大阪 2016/09 Research paper, summary (national, other academic conference)
Low-Temperature Formation of SiC/SiC Joints with High Remelting Temperature Using Paste-Like Si Powder and Al
Terada Shunichi, Kohama Kazuyuki, Yamamoto Hajime, Ito Kazuhiro
Preprints of the National Meeting of JWS Vol. 2016 p. 290-291 2016/09 Research paper, summary (national, other academic conference)
Publisher: JAPAN WELDING SOCIETY
Charpy absorbed energies and ductile fracture surfaces at liquid nitrogen temperature for ultrafine ferrite surrounded by thin-film sementite produced by FSP with low heat input
Yamamoto Hajime, Ito Kazuhiro, Izumi Hiroki, Takahashi Makoto, Kohama Kazuyuki, Fujii Hidetoshi
Preprints of the National Meeting of JWS Vol. 2016 p. 146-147 2016/09 Research paper, summary (national, other academic conference)
Publisher: JAPAN WELDING SOCIETY
Clarification of causality between plastically deformed microstructures and crack initiation and propagation in carbon steels with molten zinc
MUTO Hiroshi, ITO Kazuhiro, DANNO Yoshikazu, YAMAMOTO Hajime
Preprints of the National Meeting of JWS Vol. 2016 p. 202-203 2016/09 Research paper, summary (national, other academic conference)
Publisher: JAPAN WELDING SOCIETY
Microstructural characterization on change in mechanical characteristics of low-carbon-steel welds by molten-pool vibration in the twin-wire MIG welding
Miwa Tsuyoshi, Yamamoto Hajime, Ito Kazuhiro, Sharma Abhey, Kohama Kazuyuki
Preprints of the National Meeting of JWS Vol. 2016 p. 200-201 2016/09 Research paper, summary (national, other academic conference)
Publisher: JAPAN WELDING SOCIETY
Effects of Friction-Stir-Processing Grain-Refinement on Fatigue Strength and Charpy Absorbed Energies of TIG-welded SS400 Steel Plates
K. Ito, T. Okuda, H. Izumi, M. Takahashi, H. Yamamoto, H. Fujii
9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM9), Kyoto, Japan 2016/08 Research paper, summary (international conference)
Effects of Cu(Ti) Electrodes on Contact Resistance of the Cu(Ti)/IGZO Junction and IGZO-TFT Performance
K. Ito, K. Kohama, T. Sano, T. Nabatame, A. Ohi
9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM9), Kyoto, Japan 2016/08 Research paper, summary (international conference)
摩擦攪拌プロセスをによる高張力鋼突合せ溶接継手の引張疲労強度増加
山本 啓, 伊藤 和博, 小濱 和之, 藤井 英俊
（一社）溶接学会 平成28年度春季全国大会, 大阪 2016/04 Research paper, summary (national, other academic conference)
Effect of Cu(Ti)/IGZO-Junction Interface on IGZO-TFT Performance
Kohama Kazuyuki, Ito Kazuhiro, Nishibata Atsushi, Sano Takayuki, Nabatame Toshihide, Ohi Akihiko
Preprints of the National Meeting of JWS Vol. 2016 p. 160-161 2016/04 Research paper, summary (national, other academic conference)
Publisher: JAPAN WELDING SOCIETY
a-Ge膜のFLA結晶化におけるSiOxキャップ膜の効果
吉岡 尚輝, 平野 翔大, 部家 彰, 松尾 直人, 中村 祥章, 横森 岳彦, 吉岡 正樹, 小濱 和之, 伊藤 和博, 河本 直哉
（公社）日本金属学会 2016年春期大会, 東京 2016/03 Research paper, summary (national, other academic conference)
Siペーストの粒子体積分率制御によるSiC低温接合と接合強度向上
小濱 和之, 寺田 俊一, 伊藤 和博, 桐原 聡秀
（公社）日本金属学会 2016年春期大会, 東京 2016/03 Research paper, summary (national, other academic conference)
摩擦攪拌プロセスによる高張力鋼突合せ溶接部の引張疲労強度増加
山本 啓, 伊藤 和博, 小濱 和之, 藤井 英俊
（公社）日本金属学会 2016年春期大会, 東京 2016/03 Research paper, summary (national, other academic conference)
Contact-Resistance Reduction for Cu(Ti)/Conductive-Oxide-Film Junctions
K. Ito, K. Kohama, T. Sano, A. Nishijima, T. Nabatame, A. Ohi
TMS 2016 145th Annual Meeting & Exhibition, Nashville, USA 2016/02 Research paper, summary (international conference)
Increase of Fatigue Life of High-Tensile Steel Welds with Increase of Their Yield Stress Using Friction Stir Processing
R. Yamasaki, K. Ito, K. Kohama, M. Takahashi, H. Yamamoto, H. Fujii, R. Ueji, C. Shiga
3rd International Conference in Africa and Asia, Welding and Failure Analysis of Engineering Materials (WAFA-2015), Luxor, Egypt 2015/11 Research paper, summary (international conference)
Increase in Fatigue Life of Arc-welded Steel Plates by Friction Stir Processing
K. Ito, H. Izumi, K. Kohama, H. Fujii
3rd International Conference in Africa and Asia, Welding and Failure Analysis of Engineering Materials (WAFA-2015), Luxor, Egypt 2015/11 Research paper, summary (international conference)
Cu(Ti)/IGZO接合の接触抵抗値低減および薄膜トランジスタ特性と界面微細構造の関係
小濱 和之, 伊藤 和博, 佐野 貴之, 生田目 俊秀, 大井 暁彦
（公社）日本金属学会 2015年秋期大会, 福岡 2015/09 Research paper, summary (national, other academic conference)
鋼溶接部シャルピー衝撃吸収値の摩擦攪拌プロセスによる改善
和泉 博貴, 伊藤 和博, 小濱 和之
（公社）日本金属学会 2015年秋期大会, 福岡 2015/09 Research paper, summary (national, other academic conference)
摩擦攪拌プロセスによる溶接部疲労強度増加に及ぼす母材強度の影響
山﨑 亮太, 伊藤 和博, 小濱 和之, 高橋 誠, 山本 啓
（公社）日本金属学会 2015年秋期大会, 福岡 2015/09 Research paper, summary (national, other academic conference)
Siペースト中間材の初期粒子径分布制御によるSiCの低温・高強度接合
寺田 俊一, 小濱 和之, 伊藤 和博, 桐原 聡秀
（一社）溶接学会 平成27年度秋季全国大会, 札幌 2015/09 Research paper, summary (national, other academic conference)
摩擦攪拌プロセスにより微細化したTIG溶接SS400鋼組織のシャルピー衝撃値
和泉 博貴, 伊藤 和博, 小濱 和之, 藤井 英俊
（一社）溶接学会 平成27年度秋季全国大会, 札幌 2015/09 Research paper, summary (national, other academic conference)
摩擦攪拌プロセスによる溶接部疲労強度増加に及ぼす母材強度の影響
山﨑 亮太, 伊藤 和博, 小濱 和之, 高橋 誠, 山本 啓, 藤井 英俊, 上路 林太郎, 志賀 千晃
（一社）溶接学会 平成27年度秋季全国大会, 札幌 2015/09 Research paper, summary (national, other academic conference)
Contact-Resistance Reduction for Cu(Ti)/Conductive-Oxide-Film Junctions
Kazuhiro ITO
The 6th International Symposium on Advanced Materials Development and Integration of Novel Structured Metallic and Inorganic Materials (AMDI-6), Tokyo, Japan 2015/06 Research paper, summary (international conference)
Formation of ZrC-ZrC Joints Using Spark Plasma Sintering System
K. Kohama, K. Ito
68th Annual Assembly of Int. Inst. Welding (IIW), Helshinki, Finland 2015/06 Research paper, summary (international conference)
Fatigue Life Increase by Surface Modification Using Friction Stir Processing for TIG-Weld SS400 Steel Plates
K. Ito, T. Okuda, R. Yamazaki, K. Kohama, R. Ueji, H. Fujii, C. Chiga
68th Annual Assembly of Int. Inst. Welding (IIW), Helsinki, Finland 2015/06 Research paper, summary (international conference)
Effects of Friction Stir Processing on Charpy Impact Value for Welded Joints of Steel Plates
K. Kohama, K. Ito, H. Izumi
The 6th International Symposium on Advanced Materials Development and Integration of Novel Structured Metallic and Inorganic Materials(AMDI-6), Tokyo, Japan 2015/06 Research paper, summary (international conference)
Siペースト塗布による炭化ケイ素の低温接合
小濱 和之, 伊藤 和博, 寺田 俊一, 桐原 聡秀
（一社）溶接学会 平成27年度春季全国大会, 東京 2015/04 Research paper, summary (national, other academic conference)
Effects of friction stir processing on Charpy impact value of TIG welded steel plates
K. Kohama, K. Ito, H. Izumi
The 5th International Symposium on Advanced Materials Development and Integration of Novel Structured Metallic and Inorganic Materials (AMDI-5) Conjunction with 6th IBB Frontier Symposium, Tokyo, Japan 2014/11 Research paper, summary (international conference)
Reduction of contact resistance for Cu(Ti)/IGZO junction
K. Ito, K. Kohama, T. Sano, T. Nabatame, A. Ohi
The 5th International Symposium on Advanced Materials Development and Integration of Novel Structured Metallic and Inorganic Materials (AMDI-5) Conjunction with 6th IBB Frontier Symposium, Tokyo, Japan 2014/11 Research paper, summary (international conference)
Effects of Reducing FSP Heat Input on Fatigue Life of TIG Welded SS400 Plates
R. YAMASAKI, K. ITO, T. OKUDA, K. KOHAMA, R. UEJI, H. FUJII, C. SHIGA
The International Symposium on Visualization in Joining & Welding Science through Advanced Measurements and Simulation, in conjunction with Symposium on the Research Activities of Joint Usage / Research Center on Joining and Welding (Visual-JW 2014), Osaka, Japan 2014/11 Research paper, summary (international conference)
ZrC-ZrC Bonding Using Spark Plasma Sintering System
K. KOHAMA, K. ITO
The International Symposium on Visualization in Joining & Welding Science through Advanced Measurements and Simulation, in conjunction with Symposium on the Research Activities of Joint Usage / Research Center on Joining and Welding (Visual-JW 2014), Osaka, Japan 2014/11 Research paper, summary (international conference)
軟X線照射によるSiOx中のnc-Siの形成
草壁 史, 平野 翔大, 部家 彰, 松尾 直人, 神田 一浩, 望月 孝晏, 宮本 修治, 小濱 和之, 伊藤 和博
（公社）日本金属学会 2014年秋期大会, 名古屋 2014/09 Research paper, summary (national, other academic conference)
Low-Temperature Formation of nc-Si in SiOx by Soft X-ray Irradiation
F. Kusakabe, S. Hirano, A. Heya, N. Matsuo, K. Kanda, T. Motizuki, K. Kohama, K. Ito
International Conference on Solid State Devices and Materials (SSDM2014), Tsukuba, Japan 2014/09 Research paper, summary (international conference)
Soft X-ray Crystallization of Si1-xGex Multilayer Films
A. Heya, F. Kusakabe, N. Matsuo, K. Kanda, T. Motizuki, M. Takahashi, K. Ito
International Conference on Solid State Devices and Materials (SSDM2014), Tsukuba, Japan 2014/09 Research paper, summary (international conference)
摩擦攪拌プロセスを用いた490MPa級高張力鋼板溶接部の疲労寿命改善
山崎 亮太, 伊藤 和博, 奥田 達哉, 小濱 和之, 藤井 英俊, 上路 林太郎, 志賀 千晃
（公社）日本金属学会 2014年秋期大会, 名古屋 2014/09 Research paper, summary (national, other academic conference)
軟X線源を用いたSiGe多層膜の低温結晶化
草壁 史, 丸山 裕樹, 部家 彰, 松尾 直人, 神田 一浩, 望月 孝晏, 伊藤 和博, 高橋 誠
（公社）応用物理学会2014年秋季大会, 北海道 2014/09 Research paper, summary (national, other academic conference)
Cu(Ti)合金膜を用いたIGZO膜への低接触抵抗電極の作製
伊藤 和博, 小濱 和之, 佐野 貴之, 生田目 俊秀, 大井 暁彦
（公社）日本金属学会 2014年秋期大会, 名古屋 2014/09 Research paper, summary (national, other academic conference)
Synthesis of p-type Ti-based oxide conductive films utilizing interface reaction
Kohama Kazuyuki, Ito Kazuhiro, Lin Dehua, Shirai Yasuharu, Murakami Masanori
Preprints of the National Meeting of JWS Vol. 2014 p. 282-283 2014/09 Research paper, summary (national, other academic conference)
Publisher: JAPAN WELDING SOCIETY
摩擦攪拌プロセスを用いた490MPa級高張力鋼板溶接部の疲労寿命改善
山崎 亮太, 伊藤 和博, 奥田 達哉, 小濱 和之, 藤井 英俊, 上路 林太郎, 志賀 千晃
（一社）溶接学会 平成26年度秋季全国大会, 富山 2014/09 Research paper, summary (national, other academic conference)
放電プラズマ焼結装置を用いた炭化ジルコニウムの直接固相接合
小濱 和之, 伊藤 和博
（一社）溶接学会 平成26年度春季全国大会, 東京 2014/04 Research paper, summary (national, other academic conference)
放電プラズマ焼結装置を用いた配線用Cu棒材同士の直接低温接合
小濱 和之, 斎藤 理史, 伊藤 和博
（一社）溶接学会 平成26年度春季全国大会, 東京 2014/04 Research paper, summary (national, other academic conference)
摩擦撹拌プロセスによるTIG溶接部の機械的特性改善に与えるプロセス条件の影響
伊藤 和博, 奥田 達哉, 山崎 亮太, 小濱 和之, 上路 林太郎, 藤井 英俊, 志賀 千晃
（一社）溶接学会 平成26年度春季全国大会, 東京 2014/04 Research paper, summary (national, other academic conference)
有機EL用陽極としての極薄膜RuO2膜の特性
山本 逸平, 生田目 俊秀, Katareeya Taweesup, 高橋 誠, 伊藤 和博, 大井 暁彦, 知京 豊裕, 大石 知司
（公社）日本金属学会2014年春期大会, 東京 2014/03 Research paper, summary (national, other academic conference)
放電プラズマ焼結装置を用いた配線用Cu棒材の低温接合
伊藤 和博, 小濱 和之, 斎藤 理史
（公社）日本金属学会2014年春期大会, 東京 2014/03 Research paper, summary (national, other academic conference)
放電プラズマ焼結装置を用いた炭化ジルコニウムの直接固相接合
小濱 和之, 伊藤 和博
（公社）日本金属学会2014年春期大会, 東京 2014/03 Research paper, summary (national, other academic conference)
摩擦攪拌プロセスにより表面改質されたSS400板材溶接部の機械的特性に及ぼす入熱の影響
山崎 亮太, 伊藤 和博, 奥田 達哉, 小濱 和之, 上路 林太郎, 藤井 英俊, 志賀 千晃
（公社）日本金属学会2014年春期大会, 東京 2014/03 Research paper, summary (national, other academic conference)
Low-Temperature Bonding of Cu Bars using Spark Plasma Sintering Process
K. Ito, K. Kohama
Advanced Materials Development and Integration of Novel Structured Metallic and Inorganic Materials (AMDI-4), Nagoya, Japan 2013/12 Research paper, summary (international conference)
Improving Bending Fatigue of TIG Welded SS400 Steel Plates Using Friction Stir Processing
Tatsuya Okuda, Kazuhiro Ito, Rintaro Ueji, Hidetoshi Fujii, Chiaki Shiga
International Joint Symposium on Joining and Welding (IJS-JW2013), Osaka, Japan 2013/11 Research paper, summary (international conference)
Improving Bending Fatigue of TIG Welded SS400 Steel Plates Using Friction Stir Processing
T. Okuda, K. Ito, R. Ueji, H. Fujii, C. Shiga
International Symposium on Interfacial Joining and Surface Technology (IJST2013), Osaka, Japan 2013/11 Research paper, summary (international conference)
軟X線照射により結晶化したSiGe多層膜のTEM観察
草壁 史, 丸山 裕樹, 部家 彰, 松尾 直人, 神田 一浩, 望月 孝晏, 伊藤 和博, 高橋 誠
（公社）日本金属学会 2013年秋期大会, 金沢 2013/09 Research paper, summary (national, other academic conference)
A6061/AZ31/A6061圧延接合クラッド板の機械的特性に及ぼす圧下率の影響
安田 尚史, 伊藤 和博, 小濱 和之, 高橋 誠
（公社）日本金属学会 2013年秋期大会, 金沢 2013/09 Research paper, summary (national, other academic conference)
一般構造用圧延鋼材TIG溶接部の摩擦撹拌プロセスによる表面改質
奥田 達哉, 伊藤 和博, 上路 林太郎, 藤井 英俊, 志賀 千晃
（公社）日本金属学会 2013年秋期大会, 金沢 2013/09 Research paper, summary (national, other academic conference)
ｐ型Ti酸化物透明導電膜の作製と物性評価
林 徳樺, 伊藤 和博, 小濱 和之, 大西 隆, 白井 泰治, 村上 正紀
（公社）日本金属学会 2013年秋期大会, 金沢 2013/09 Research paper, summary (national, other academic conference)
一般構造用圧延鋼材TIG溶接部の摩擦撹拌プロセスによる表面改質
奥田 達哉, 伊藤 和博, 上路 林太郎, 藤井 英俊, 志賀 千晃
（一社）溶接学会 平成25年度秋季全国大会, 岡山 2013/09 Research paper, summary (national, other academic conference)
ガラス基板上への高密着Cu膜の低温接合
小濱 和之, 伊藤 和博, 浜坂 啓司, 白井 泰治, 村上 正紀
（一社）溶接学会 平成25年度秋季全国大会, 岡山 2013/09 Research paper, summary (national, other academic conference)
A6061/AZ31/A6061圧延接合クラッド板の圧延接合条件と機械的特性の関係
安田 尚史, 伊藤 和博, 小濱 和之, 井口 悠, 高橋 誠, 柴柳 敏哉
（一社）溶接学会 平成25年度秋季全国大会, 岡山 2013/09 Research paper, summary (national, other academic conference)
Control factors of specific strength and bending properties in rolled A6061/AZ31/A6061 clad plates
Ito Kazuhiro, Iguchi Yuu, Takahashi Makoto, Shibayanagi Toshiya
Preprints of the National Meeting of JWS Vol. 2013 p. 130-131 2013/04 Research paper, summary (national, other academic conference)
Publisher: JAPAN WELDING SOCIETY
Resistance reduction of Cu alloy interconnects in the contact with ITO transparent conductive films
Ito Kazuhiro, Nakagawa Wataru, Onishi Takashi, Shirai Yasuharu, Murakami Masanori
Preprints of the National Meeting of JWS Vol. 2013 p. 44-45 2013/04 Research paper, summary (national, other academic conference)
Publisher: JAPAN WELDING SOCIETY
Control factors of specific strength and bending properties in rolled A6061/AZ31/A6061 clad plates
Ito Kazuhiro, Iguchi Yuu, Takahashi Makoto, Shibayanagi Toshiya
Preprints of the National Meeting of JWS Vol. 2013 p. 130-131 2013/03 Research paper, summary (national, other academic conference)
Publisher: JAPAN WELDING SOCIETY
Anatase/Rutile型TiO2膜の酸素移動とフラットバンド電圧シフトの関係
木村 将之, 生田目 俊秀, 山田 博之, 大井 暁彦, 成島 利弘, 伊藤 和博, 高橋 誠, 知京 豊裕, 大石 知司
（公社）日本金属学会 2013年春期大会, 東京 2013/03 Research paper, summary (national, other academic conference)
低抵抗･高密着Cu配線形成のためのCu(Mg)合金膜を用いた低温プロセス開発
伊藤 和博, 浜坂 啓司, 白井 泰治, 村上 正紀
（公社）日本金属学会 2013年春期大会, 東京 2013/03 Research paper, summary (national, other academic conference)
Reduction of Process Temperature and Time for Producing Low-Resistivity and Excellent-Adhesion Cu Interconnects on Glass Substrates Using Cu(Mg) Alloy Films
Keiji HAMASAKA, Kazuhiro ITO, Y. HAYAKAWA, Yasuharu SHIRAI, Masanori MURAKAMI
The International Symposium on Visualization in Joining & Welding Science through Advanced Measurements and Simulation (Visual-JW2012), Osaka, Japan 2012/11 Research paper, summary (international conference)
Reduction of Contact Resistance for Cu(Ti)/ITO Junction
Kazuhiro ITO, Wataru NAKAGAWA, Yasuharu SHIRAI, Masanori MURAKAMI
The International Symposium on Visualization in Joining & Welding Science through Advanced Measurements and Simulation (Visual-JW2012), Osaka, Japan 2012/11 Research paper, summary (international conference)
Effect of Al Plates on Mechanical Properties of Rolled Al/Mg/Al Clad Plates
Yuu IGUCHI, Kazuhiro ITO, Makoto TAKAHASHI, Toshiya SHIBAYANAGI
The International Symposium on Visualization in Joining & Welding Science through Advanced Measurements and Simulation (Visual-JW2012), Osaka, Japan 2012/11 Research paper, summary (international conference)
Reduction of process temperature and time for producing low-resistivity and excellent-adhesion Cu interconnects on glass substrates using Cu(Mg) alloy films
K. Ito, K. Hamasaka, Y. Hayakawa, Y. Shirai, M. Murakami
The 3rd International Symposium on Advanced Materials Development and Integration of Novel Structural Metallic and Inorganic Materials (AMDI3), Toyohashi, Japan 2012/11 Research paper, summary (international conference)
Cladding Synthesis of AZ31 Plates with A6061 Plates by Rolling
Y. Iguchi, K. Ito, M. Takahashi, and T. Shibayanagi
The 3rd International Symposium on Advanced Materials Development and Integration of Novel Structural Metallic and Inorganic Materials (AMDI3), Toyohashi, Japan 2012/11 Research paper, summary (international conference)
圧延接合法によるAl/Mg/Al合金クラッド板の機械的特性向上に及ぼすAl板の影響
伊藤 和博, 井口 悠, 高橋 誠, 柴柳 敏哉
（一社）溶接学会 平成24年度秋季全国大会, 奈良 2012/09 Research paper, summary (national, other academic conference)
スパッタ法を用いたSiO2/Si基板上での高配向グラファイト膜形成プロセス開発
松本 卓也, 小林 亮平, 伊藤 和博, 白井 泰治, 村上 正紀
（公社）日本金属学会 2012年秋期大会, 愛媛 2012/09 Research paper, summary (national, other academic conference)
Cu(M)/ガラス試料の低抵抗化のためのMg合金元素による熱処理温度・時間の低温・短時間化
浜坂 啓司, 早川 祐司, 伊藤 和博, 白井 泰治, 村上 正紀
（公社）日本金属学会 2012年秋期大会, 愛媛 2012/09 Research paper, summary (national, other academic conference)
圧延接合法によるAl/Mg/Al合金クラッド板の機械的特性向上に及ぼすAl板の影響
井口 悠, 伊藤 和博, 高橋 誠, 柴柳 敏哉
（公社）日本金属学会 2012年秋期大会, 愛媛 2012/09 Research paper, summary (national, other academic conference)
ナノスケールCu配線の低抵抗化と信頼性向上
伊藤和博
日本金属学会講演概要(CD−ROM) Vol. 150th 2012/03/15
スパッタCu膜の室温粒成長に及ぼすCu膜配向性とバリアの影響
小濱和之, 松本卓也, 伊藤和博, 白井泰治, 村上正紀
日本金属学会講演概要(CD−ROM) Vol. 149th 2011/10/20
Cu合金/ITO界面接触抵抗の低減
中川渉, 伊藤和博, 大西隆, 白井泰治, 村上正紀
日本金属学会講演概要(CD−ROM) Vol. 149th 2011/10/20
OS15-1-1 Damage Evaluation and Life Assessment of Heat-Resisting Steels and Alloys by Using Positron Annihilation
Shirai Yasuharu, Inoue Koji, Sugita Kazuki, Ito Kazuhiro
Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics Vol. 2011 No. 10 p. "OS15-1-1-1" 2011/09/19
Publisher: The Japan Society of Mechanical Engineers
Ti基自己形成バリアにおけるバリア性の雰囲気依存性
小濱和之, 浜坂啓司, 薗林豊, 伊藤和博, 白井泰治, 村上正紀
日本金属学会講演概要 Vol. 148th 2011/04/20
Dependence of Ti-Based Self-Formed Barrier Structure on Dielectric-Layer Composition
KOHAMA Kazuyuki, ITO Kazuhiro, SONOBAYASHI Yutaka, OHMORI Kazuyuki, MORI Kenichi, MAEKAWA Kazuyoshi, SHIRAI Yasuharu, MURAKAMI Masanori
IEICE technical report Vol. 110 No. 408 p. 31-35 2011/01/31
Publisher: The Institute of Electronics, Information and Communication Engineers
高密着Cu(Ti)/ガラス界面形成のためのTiの界面偏析とガラスとの反応
上原脩司, 伊藤和博, 大西隆, 白井泰治, 村上正紀
日本金属学会講演概要 Vol. 147th 2010/09/25
SiC半導体用Ni/Al電極での界面伝導に及ぼすNi2Si(Al)の電気的特性の影響
中川渉, 本橋雄介, 伊藤和博, 白井泰治, 村上正紀
日本金属学会講演概要 Vol. 147th 2010/09/25
Cu薄膜中の双晶形成に及ぼすバリアの影響
小濱和之, 山本将貴, 伊藤和博, 白井泰治, 村上正紀
日本金属学会講演概要 Vol. 147th 2010/09/25
Cu(Ti)合金膜を用いたガラス基板上での反応生成層の同定と抵抗率低減
上原脩司, 上原脩司, 伊藤和博, 大西隆, 白井泰治, 村上正紀
日本金属学会講演概要 Vol. 146th 2010/03/28
Cu(Ti)合金膜/誘電体層界面における自己形成バリア層中の非晶質Ti化合物の同定
小濱和之, 小濱和之, 伊藤和博, 薗林豊, 森健壹, 前川和義, 白井泰治, 村上正紀
日本金属学会講演概要 Vol. 146th 2010/03/28
ポーラスLow‐k上のCu(Ti)合金膜における拡散バリア層自己形成
小濱和之, 田中智久, 伊藤和博, 森健壹, 前川和義, 白井泰治, 村上正紀
日本金属学会講演概要 Vol. 145th 2009/09/15
ガラス基板上Cu(Ti)合金膜の低抵抗化に及ぼすTi濃度の影響
上原脩司, 伊藤和博, 大西隆, 白井泰治, 村上正紀
日本金属学会講演概要 Vol. 145th 2009/09/15
Cu薄膜の強度と格子欠陥や微細組織との関係—特にナノ双晶の役割について—
伊藤和博
応用物理学関係連合講演会講演予稿集 Vol. 56th No. 2 2009/03/30
ラザフォード後方散乱法によるCu(Ti)合金膜を用いたバリア層自己形成の活性化エネルギー
小濱和之, 佐藤大樹, 伊藤和博, 森健壹, 前川和義, 白井泰治, 村上正紀
日本金属学会講演概要 Vol. 144th 2009/03/28
p,n‐SiC両伝導型にオーミック性を示すNi/Al電極のAl層厚の熱処理温度依存性
本橋雄介, 武田英久, 伊藤和博, 白井泰治, 村上正紀
日本金属学会講演概要 Vol. 144th 2009/03/28
透明導電性酸化物を用いた波長帯制御型高反射ミラー薄膜材の開発
着本享, 薗川裕美, 伊藤和博, 村上正紀
日本金属学会講演概要 Vol. 143rd 2008/09/23
薄膜の表皮効果によるCu(Ti)合金薄膜の低抵抗化に及ぼす試料作製条件の影響
佐藤大樹, 小濱和之, 伊藤和博, 大西隆, 森健壹, 前川和義, 白井泰治, 村上正紀
日本金属学会講演概要 Vol. 143rd 2008/09/23
TiNバッファ層の選択的酸溶解を用いたGaN層の剥離技術の開発
池袋哲史, 武田英久, 本橋雄介, 伊藤和博, 池本由平, 平田宏治, 村上正紀
日本金属学会講演概要 Vol. 143rd 2008/09/23
Cu(Ti)合金薄膜における自己組織化拡散バリア層成長の初期Ti濃度依存性
小濱和之, 佐藤大樹, 伊藤和博, 森健壹, 前川和義, 白井泰治, 村上正紀
日本金属学会講演概要 Vol. 143rd 2008/09/23
低濃度Cu(Ti)合金薄膜における自己組織化拡散バリア層形成反応の基板依存性
小濱和之, 小濱和之, 佐藤大樹, 佐藤大樹, 伊藤和博, 着本享, 森健壹, 前川和義, 浅井考祐, 村上正紀
日本金属学会講演概要 Vol. 142nd 2008/03/26
TiNバッファ層上に作製したGaN上でのInGaN層の成長
酒井康明, 李相陳, 伊藤和博, 着本享, 池本由平, 平田宏治, 村上正紀
日本金属学会講演概要 Vol. 141st 2007/09/19
p,n‐SiC両伝導型にオーミック性を示すNi‐Alコンタクト材の伝導機構
武田英久, 大西利武, 伊藤和博, 着本享, 村上正紀
日本金属学会講演概要 Vol. 141st 2007/09/19
n型GaN結晶成長に及ぼすTiNバッファ層の膜厚の影響
佐藤大樹, 伊藤和博, 着本享, 池本由平, 平田宏治, 村上正紀
日本金属学会講演概要 Vol. 141st 2007/09/19
Cu(Ti)合金薄膜における自己組織化拡散バリア層の形成に及ぼす基板絶縁膜の影響
小濱和之, 小濱和之, 伊藤和博, 着本享, 森健壹, 前川和義, 浅井考祐, 村上正紀
日本金属学会講演概要 Vol. 141st 2007/09/19
微細化に対する金属学的なバリア層形成手法
伊藤和博, 着本享, 村上正紀
応用物理学会学術講演会講演予稿集 Vol. 68th No. 2 2007/09/04
これだけは知っておきたい最新の配線・実装材料技術 極薄バリア層自己形成技術—冶金学的なアプローチ—
伊藤和博, 着本享, 村上正紀
金属 Vol. 77 No. 8 p. 854-859-841 2007/08/01
Publisher: アグネ技術センター
スパッタ法によるNbドープTiO2薄膜材の作製:電気・光学特性および微細構造
浜田良太, 着本享, 伊藤和博, 守山実希, 柴田直樹, 村上正紀
日本金属学会講演概要 Vol. 140th 2007/03/27
TiNバッファ層上のGaNエピタキシャル成長における膜厚最適化と微細組織の関係
李相陳, 内田悠, 伊藤和博, 着本享, 池本由平, 平田宏治, 村上正紀
日本金属学会講演概要 Vol. 140th 2007/03/27
高圧アニールによるスパッタCu(Ti)合金薄膜材の微細配線化
着本享, 大西隆, 伊藤和博, 村上正紀
日本金属学会講演概要 Vol. 139th 2006/09/16
極薄TiNバッファ層上でのGaNエピタキシャル成長
内田悠, 李相陳, 伊藤和博, 着本享, 池本由平, 平田宏治, 村上正紀
日本金属学会講演概要 Vol. 139th 2006/09/16
スパッタTiO2:Nb薄膜材における電気特性および微細構造
浜田良太, 着本享, 伊藤和博, 守山実希, 柴田直樹, 村上正紀
日本金属学会講演概要 Vol. 139th 2006/09/16
スパッタGa2O3薄膜材の微細構造及び電気・光学特性に及ぼすドーパント添加の影響
重歳恭寛, 着本享, 伊藤和博, 豊田合成, 守山実希, 柴田直樹, 村上正紀
日本金属学会講演概要 Vol. 139th 2006/09/16
TiNバッファ層上に成膜したGaNの結晶成長と格子欠陥との関係
李相陳, 内田悠, 伊藤和博, 着本享, 池本由平, 平田宏治, 村上正紀
日本金属学会講演概要 Vol. 139th 2006/09/16
GaN結晶成長用スパッタ(Ti1−XZrX)Nバッファ層の開発
酒井康明, 内田悠, 伊藤和博, 着本享, 池本由平, 平田宏治, 村上正紀
日本金属学会講演概要 Vol. 139th 2006/09/16
Self-Formation of Ti-rich Interfacial Layers in Cu(Ti) Alloy Films
TSUKIMOTO Susumu, ITO Kazuhiro, MURAKAMI Masanori
Vol. 2006 p. 1032-1033 2006/09/13
金属TiNバッファ層上での半導体GaNエピタキシャル成長の機構
内田悠, 藤田啓一, 伊藤和博, 着本享, 池本由平, 平田宏治, 村上正紀
日本金属学会講演概要 Vol. 138th 2006/03/21
自己組織化極薄バリア形成能を有するCu(Ti)系合金の変形能を向上させる第三元素の探索
可部達也, 着本享, 伊藤和博, 村上正紀, 大西隆
日本金属学会講演概要 Vol. 138th 2006/03/21
導電性TiNバッファ層上のGaN結晶成長と結晶欠陥
内田悠, 李相陳, 伊藤和博, 着本享, 池本由平, 平田宏治, 村上正紀
日本金属学会講演概要 Vol. 138th 2006/03/21
スパッタリング法によるGa2O3薄膜の微細構造および電気特性
重歳恭寛, 着本享, 伊藤和博, 守山実希, 柴田直樹, 村上正紀
日本金属学会講演概要 Vol. 138th 2006/03/21
スパッタTiO2薄膜材の微細構造および電気特性
浜田良太, 着本享, 伊藤和博, 守山実希, 柴田直樹, 村上正紀
日本金属学会講演概要 Vol. 138th 2006/03/21
p,n型SiC半導体に対するNi‐Al二元系オーミックコンタクト材の同時形成とその機構
大西利武, 西崎ゆい, 着本享, 伊藤和博, 村上正紀
日本金属学会講演概要 Vol. 138th 2006/03/21
超高速LSIの高性能化のための材料技術の最前線—II Cu(Ti)系合金配線における自己組織化バリア材形成と埋込性の改善
可部達也, 着本享, 伊藤和博, 村上正紀, 大西隆
日本金属学会講演概要 Vol. 137th 2005/09/28
導電性TiNバッファ層上でのGaN結晶成長
内田悠, 伊藤和博, 着本享, 平田宏治, 牛田泰久, 千田昌伸, 村上正紀
日本金属学会講演概要 Vol. 137th 2005/09/28
p‐GaNに対する低抵抗オーミック・コンタクト材の開発
浜口達史, 着本享, 伊藤和博, 守山実希, 村上正紀
日本金属学会講演概要 Vol. 137th 2005/09/28
p,n型SiC半導体に対するオーミック・コンタクト材の同時形成とその解析
大西利武, 着本享, 伊藤和博, 村上正紀
日本金属学会講演概要 Vol. 137th 2005/09/28
自己組織化バリア材形成Cu合金配線材の開発
可部達也, 多田宏一郎, 着本享, 伊藤和博, 村上正紀, 大西隆
日本金属学会講演概要 Vol. 136th 2005/03/29
p型GaNの電気特性に及ぼす基板転位の影響
小田垣夏樹, 着本享, 伊藤和博, 村上正紀
日本金属学会講演概要 Vol. 136th 2005/03/29
p型4H‐SiC/TiAlコンタクト材における界面反応層の電気特性および微細構造
大高幹雄, 大西利武, 着本享, 伊藤和博, 村上正紀
日本金属学会講演概要 Vol. 136th 2005/03/29
p‐GaNに対する低抵抗オーミックコンタクト材の開発
浜口達史, 斎藤陽平, 着本享, 伊藤和博, 村上正紀
日本金属学会講演概要 Vol. 136th 2005/03/29
p,n‐4H‐SiC/NiTiAlコンタクト材における電気特性および界面微細構造
大西利武, 大高幹雄, 着本享, 伊藤和博, 村上正紀
日本金属学会講演概要 Vol. 136th 2005/03/29
GaN結晶成長に及ぼすTiN導電性バッファ層の窒素濃度の影響
渡辺哲平, 伊藤和博, 着本享, 牛田泰久, 守山実希, 柴田直樹, 村上正紀
日本金属学会講演概要 Vol. 136th 2005/03/29
GaN用導電性バッファ層としての遷移金属窒化物の開発
稲垣育亮, 内田悠, 渡辺哲平, 伊藤和博, 着本享, 牛田泰久, 守山実希, 柴田直樹, 村上正紀
日本金属学会講演概要 Vol. 136th 2005/03/29
ULSI用超微細Cu配線材の限界抵抗率
島田雅博, 守山実希, 着本享, 伊藤和博, 村上正紀
日本金属学会講演概要 Vol. 135th 2004/09/28
Ti/Alコンタクト抵抗のp‐SiC基板特性依存性
伊藤和博, 着本享, 大西利武, 村上正紀
日本金属学会講演概要 Vol. 135th 2004/09/28
p型GaNに対するコンタクト材の電気特性と基板転位密度
小田垣夏樹, 着本享, 伊藤和博, 村上正紀
日本金属学会講演概要 Vol. 135th 2004/09/28
Mo‐Si‐B合金へのMoSi2コーティング
横林政人, 林泰輔, 伊藤和博, 沼倉宏, 乾晴行
日本金属学会講演概要 Vol. 135th 2004/09/28
Mo5Si3の熱膨張と弾性的性質に及ぼす遷移金属の置換効果
林泰輔, 高元美紗子, 伊藤和博, 田中克志, 乾晴行
日本金属学会講演概要 Vol. 135th 2004/09/28
GaN/TiNバッファ層の界面微細構造解析
渡辺哲平, 着本享, 伊藤和博, 村上正紀, 柴田直樹, 伊藤潤, 千田昌伸
日本金属学会講演概要 Vol. 135th 2004/09/28
Cu配線材合金化による自己制御型バリア材の開発
森田敏文, 着本享, 伊藤和博, 村上正紀, 大西隆
日本金属学会講演概要 Vol. 135th 2004/09/28
Mo5SiB2単結晶およびその合金へのMoSi2コーティング後の拡散層での相成長のメカニズム
横林政人, 林泰輔, 伊藤和博, 沼倉宏, 村上敬, 山口正治
日本金属学会講演概要 Vol. 134th 2004/03/30
Mo5Si3の力学特性に及ぼす構成元素の置換効果
林泰輔, 高元美紗子, 伊藤和博, 田中克志, 山口正治
日本金属学会講演概要 Vol. 134th 2004/03/30
熱電材料の薄膜化による熱伝導率の低減
足立克之, 伊藤和博, 張らん庭, 山口正治
日本金属学会講演概要 Vol. 133rd 2003/10/11
Ti3Al‐H系合金での水素吸蔵・放出に伴う可逆的な相変態
伊藤和博, ZHANG L T, 山口正治, 神山崇, 星川晃範, 石垣徹
日本金属学会講演概要 Vol. 133rd 2003/10/11
Mo‐9Si‐18B二相合金への耐酸化シリサイドコーティング
横林政人, 伊藤和博, 村上敬, 山口正治
日本金属学会講演概要 Vol. 133rd 2003/10/11
Mo5SiB2/Mo拡散対における拡散挙動
林泰輔, 伊藤和博, 沼倉宏, 山口正治
日本金属学会講演概要 Vol. 133rd 2003/10/11
減圧プラズマ溶射によるB添加Mo5Si3及びCr添加Nb(Si,Al)2層のNb基材上へのコーティング
村上敬, 佐々木信也, 伊藤和博, 山口正治
日本金属学会講演概要 Vol. 132nd 2003/03/27
Zn4Sb3に及ぼすInドーピングの効果
筒井真楠, 張らん庭, 伊藤和博, 山口正治
日本金属学会講演概要 Vol. 132nd 2003/03/27
Mo5X3(X=Si,C,B)化合物の電気伝導と熱伝導
林泰輔, 伊藤和博, 張らん庭, 山口正治
日本金属学会講演概要 Vol. 132nd 2003/03/27
CoSi薄膜の熱電特性
足立克之, 伊藤和博, 張らん庭, 山口正治
日本金属学会講演概要 Vol. 132nd 2003/03/27
放電プラズマ焼結によるNb基材上へのMo(Si,Al)2,B添加Mo5Si3のコーティング
村上敬, 佐々木信也, 伊藤和博, 乾晴行, 山口正治
日本金属学会講演概要 Vol. 131st 2002/11/02
パック・セメンテーション法を用いたMo‐Si‐B複相材料への耐酸化コーティング
伊藤和博, 村上敬, 足立克之, 山口正治
日本金属学会講演概要 Vol. 131st 2002/11/02
Mo‐Si‐B系共晶合金における室温靭性と高温強度
熊谷康顕, 伊藤和博, 山口正治
日本金属学会講演概要 Vol. 131st 2002/11/02
Mo5SiB2化合物の超高温圧縮及びクリープ変形
林泰輔, 伊藤和博, 藤倉正国, 山口正治
日本金属学会講演概要 Vol. 131st 2002/11/02
Ti3Al基合金における水素吸蔵と水素の占有位置
伊藤和博, 高木紘介, 三船耕平, 山口正治
日本金属学会講演概要 Vol. 130th 2002/03/28
Ti3Al合金の水素吸蔵と放出
伊藤和博, 岡部善治, ZHANG L T, 山口正治
日本金属学会講演概要 Vol. 130th 2002/03/28
Nb‐Si‐Al‐Cr系金属間化合物の耐酸化性
村上敬, 佐々木信也, 市川れつ, 足立克之, 伊藤和博, 乾晴行, 山口正治
日本金属学会講演概要 Vol. 130th 2002/03/28
Mo5Si3C単結晶の力学特性
林泰輔, 伊藤和博, 田中克志, 山口正治
日本金属学会講演概要 Vol. 130th 2002/03/28
(Mo,Nb)‐Si‐B系共晶合金の力学特性
熊谷康顕, 伊藤和博, 山口正治
日本金属学会講演概要 Vol. 130th 2002/03/28
Ti3Al基合金における水素吸蔵とマルテンサイト変態の関連性 (<特集>第3回21世紀の境界領域研究を考えるシンポジウム)
伊藤 和博
バウンダリ- Vol. 17 No. 8 p. 33-35 2001/08
Publisher: コンパス社
Ti‐22Al‐27Nb合金の水素吸蔵特性に及ぼす微細構造の効果
伊藤和博, VASUDEVAN V K, 山口正治
日本金属学会講演概要 Vol. 125th 1999/11/20
超高温材料としての遷移金属シリサイド
伊藤和博, 乾晴行, 山口正治
日本金属学会講演概要 Vol. 124th 1999/03/29
Atomistic study on segregation of Ti at the lamella boundary in TiAl alloy.
ITO KAZUHIRO, VITEK V
日本金属学会講演概要 Vol. 123rd 1998/09
Atomistic research on the plastic anisotropy of transition metals with BCC structure.
ITO KAZUHIRO, VITEK V
日本金属学会講演概要 Vol. 123rd 1998/09
Deformation of transition metal di-silicide with C11b structure and its derived structures.
MORIWAKI MASAYA, NAKAMOTO TAKAYUKI, ITO KAZUHIRO, INUI HARUYUKI, YAMAGUCHI MASAHARU
日本金属学会講演概要 Vol. 119th 1996/09
Effect of lamination defect on (001) plane on mechanical properties of (Mo,W) Si2 single crystal of C11b type structure.
NAKAMOTO TAKAYUKI, ITO KAZUHIRO, INUI HARUYUKI, YAMAGUCHI MASAHARU
日本金属学会講演概要 Vol. 119th 1996/09
Deformation mechanism of WSi2 single crystal.
YANO TAKAYUKI, ITO KAZUHIRO, INUI HARUYUKI, YAMAGUCHI MASAHARU
日本金属学会講演概要 Vol. 118th 1996/03
Temperature dependency of the slip system and deformation stress of Mo(Si,Al)2 single crystal with a C40 type structure.
MORIWAKI MASAYA, ITO KAZUHIRO, NAKAMOTO TAKAYUKI, INUI HARUYUKI, YAMAGUCHI MASAHARU
日本金属学会講演概要 Vol. 118th 1996/03
WSi2単結晶のすべり系と変形応力の温度依存性
矢野尊之, 伊藤和博, 乾晴行, 山口正治
日本金属学会講演概要 Vol. 116th 1995/04
MoSi2単結晶における{013}すべりのCRSSの方位依存性
伊藤和博, 中本貴之, 乾晴行, 山口正治
日本金属学会講演概要 Vol. 116th 1995/04
MoSi2単結晶のすべり系と変形応力の温度依存性
伊藤和博, 矢野尊之, 乾晴行, 山口正治
日本金属学会講演概要 Vol. 115th 1994/10
2p-YA-11 Electronic structure of FeSi by high-resolution photoemission spectroscopy
Saitoh T, Sekiyama A, Mizokawa T, Fujimori A, Itoh K, Nakamura H, Shiga M
Abstracts of the meeting of the Physical Society of Japan. Sectional meeting Vol. 1994 No. 3 p. 27-27 1994/08/16
Publisher: The Physical Society of Japan (JPS)
MoSi2基複相材料の一方向凝固組織と機械的性質
伊藤和博, 矢野尊之, 乾晴行, 山口正治
日本金属学会講演概要 Vol. 114th 1994/03
CoSi2単結晶の変形機構
伊藤和博, 乾晴行, 平野敏幸, 山口正治
日本金属学会講演概要 Vol. 113th 1993/09
31p-PSB-9 Electrical and thermal properties of YInCu_4
Ito K, Uenishi A, Nakamura H, Wada H, Shiga E
Abstracts of the meeting of the Physical Society of Japan. Annual meeting Vol. 48 No. 3 p. 104-104 1993/03/16
Publisher: The Physical Society of Japan (JPS)
Electrical and thermal properties of YInCu4.
伊藤和博, 上西朗弘, 中村裕之, 和田裕文, 志賀正幸
日本物理学会講演概要集(年会) Vol. 48th No. 3 1993/03
25p-PSB-40 Magnetic and transport properties of (GdxLu_<1-X>)lnCu_4
Ito K, Nakamura H, Shiga M
Vol. 1992 No. 3 p. 73-73 1992/09/14
Publisher: The Physical Society of Japan (JPS)
Magnetic and transport properties of (GdxLu1-x)InCu4.
伊藤和博, 中村裕之, 志賀正幸
日本物理学会講演概要集(分科会) Vol. 1992 No. Autumn Pt 3 1992/09
30p-PS-26 Magnetic properties and frustration of compounds
Ito K, Nakamura H, Wada H, Shiga M
Vol. 47 No. 3 p. 144-144 1992/03/12
Publisher: The Physical Society of Japan (JPS)
Magnetic properties and frustration of Gd compounds.
伊藤和博, 中村裕之, 和田裕文, 志賀正幸
日本物理学会講演概要集(年会) Vol. 47th No. 3 1992/03
CoSi2単結晶の塑性変形
伊藤和博, 乾晴行, 下川隆義, 平野敏幸, 山口正治
日本金属学会講演概要 Vol. 108th 1991/03
Novel Structured Metallic and Inorganic Materials
Kazuhiro Ito
Springer 2019/07 Scholarly book
ISBN: 9789811376108
薄膜合金材料の表皮効果を用いた新複合材料の開発
伊藤和博, 京都大学大学院工学研究科
[伊藤和博] 2008
研究室シーズと共研課題のソリューション事例
伊藤 和博
第19回産官学連携シンポジウム 2022/06
ここまで分かったFSWによる鋼接合部の表面改質
伊藤 和博
第120回 界面接合研究委員会 2022/05
Explosion Welding of W/Cu and Mo/Cu Clads and Related Shock Wave Damages
K. Ito, P.K. Parshuri, S. Kotegawa, H. Yamamoto, A. Mori, S. Tanaka, and K. Hokamoto
International Conference on Materials Science and Engineering 2021/10
摩擦攪拌プロセスによる表面改質とその効果・機構
伊藤 和博
表面分析研究会第56回研究会 2021/06
摩擦攪拌プロセスによるWCツール構成元素の鋼中固溶機構
山本 啓、今川 雄大、伊藤 和博
第117回界面接合研究委員会 2021/05
摩擦攪拌プロセスによる組織改質が低炭素鋼溶接部の破壊靱性に及ぼす影響
山本 啓, 和泉 博貴, 伊藤 和博
（一社）スマートプロセス学会 2020年度学術講演会 2020/11
Numerical Study of Material Flow in a Molten Pool of the Workpiece Vibration Assisted Welding
Habib Hamed Zargari, Kazuhiro Ito, Abhay Sharma
India-UK SPARC Webinar on Metal Additive Manufacturing and Friction Stir Processing: Present and Future, 2020 2020/09
Numerical Study of Material Flow in a Molten Pool of the Workpiece Vibration Assisted Welding
Habib Hamed Zargari, Kazuhiro Ito, Abhay Sharma
第241回溶接冶金研究委員会 2020/08
Metallurgical Characterization of Penetration Shape Change in MAG Welds using Workpiece-vibration Hanoi
Kazuhiro Ito
WWJ 2019 2019/03
WC ツールを用いた摩擦攪拌プロセスによる表面改質と機能性向上
伊藤 和博, 山本 啓, 段野 芳和
日本金属学会 2019年春期講演大会 2019/03
炭素鋼溶接部特性改善のための冶金的アプローチ
伊藤 和博
ベトナム溶接研究会発足記念セミナー 2019/03
Change for Better in the Penetration Shape of Twin-wire MAG Welds using Workpiece Vibration
Kazuhiro Ito, Habib Hamed Zargari, Hajime Yamamoto, Tsuyoshi Miwa, Pradeep Kumar Parchuri, Abhay Sharma, and Manish Kumar
4th International Conference on Welding and Failure Analysis of Engineering Materials (WAFA-2018) 2018/11
Application of Workpiece Vibration to Twin-wire MAG Welding
Kazuhiro Ito, Habib Hamed Zargari, Pradeep Kumar Parchuri, Hajime Yamamoto, and Abhay Sharma
The Conference of International Welding and Inspection Technology 2018 (TWIT2018) 2018/11
Steel-surface modification by friction stir processing using a WC tool
Kazuhiro Ito, Hajime Yamamoto, Yoshikazu Danno, Hidetoshi Fujii
The 3rd International Symposium on Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development (iLIM-3) 2018/09
New approaches in arc welding technology and trends: Design for improving fatigue properties / Improving a penetration shape using workpiece-vibration in twin-wire MAG welding.
Kazuhiro Ito
Technical Seminar and Workshop on High Precision Arc Welding Technology in India 2018/08
材料科学を齧った者がみた溶接・接合 - 物性の探求から場の影響・効率の追求へ？
伊藤 和博
溶接学会関西支部技術交流会 2018/06
FSPによる鋼溶接部表面改質と機械的特性改善の関係
伊藤 和博、小濱 和之、藤井 英俊
日本溶接協会第4回溶接・接合プロセス研究委員会シンポジウム 2017/11
Application of friction stir processing to high-tensile-steel welds
Kazuhiro Ito, Hajime Yamamoto, Makoto Takahashi, Kazuyuki Kohama, Hidetoshi Fujii
3rd International Conference on Friction Based Processes (ICFP2017) 2017/11
Application of friction stir processing to high-tensile-steel welds
Kazuhiro Ito, Hajime Yamamoto, T. Okuda, H. Izumi, Makoto Takahashi, Kazuyuki Kohama, Hidetoshi Fujii
The Conference of International Welding and Inspection Technology (IWIT 2017) 2017/11
Application of friction stir processing to high-tensile-steel welds
Kazuhiro Ito, Hajime Yamamoto, Makoto Takahashi, Kazuyuki Kohama, Hidetoshi Fujii
7th International Conference on Welding Science and Engineering 2017/10
Friction-Stir-Processing Microstructure Improvement Related to Fatigue-Strength and Charpy-Absorbed-Energy Increase of TIG-Welded SS400 Steels
Kazuhiro Ito, Tatsuya Okuda, Hiroki Izumi, Makoto Takahashi, Kazuyuki Kohama, Hajime Yamamoto, Hidetoshi Fujii
2017 TMS Annual Meeting & Exhibition 2017/02
Unique microstructure in low-carbon steel welds formed by friction stir processing with high fatigue strength and Charpy absorbed energy
Kazuhiro Ito
The Workshop between JWRI and University of Indonesia 2016/11
Investigation on Cooling Strategies during Wire Arc Additive Layer Manufacturing
Abhay SHARMA, Jayprakash SHARMA, Kazuhiro ITO, Surya S KUMAR, Hajime YAMAMOTO, Kazuyuki KOHAMA
The International Symposium on Visualization in Joining & Welding Science through Advanced Measurements and Simulation (Visual-JW2016) 2016/10
Increase in Fatigue Life of Arc-welded Steel Plates by Friction Stir Processing
Kazuhiro ITO
The second workshop on welding and Joining (WWJ2015) 2015/08
Increase in Fatigue Life of Arc-welded Steel Plates by Friction Stir Processing
Kazuhiro ITO
Workshop between Department of Metallurgical Engineering, Kasetsart Univ. & JWRI 2015/08
Increase in Fatigue Life of Arc-welded Steel Plates by Friction Stir Processing
Kazuhiro ITO
Workshop between Department of Metallurgical Engineering, Chulalongkorn Univ. & JWRI 2015/08
溶接冶金学I-2 [溶接部の組織と材質変化] 溶接部の相変態と組織、組織の硬さ・靱性、溶接欠陥
伊藤 和博
平成27年度溶接工学夏季大学 2015/07
摩擦攪拌プロセスを用いた鋼溶接部疲労寿命増加
伊藤 和博
大阪大学新技術説明会 2015/07
金属物理学の観点から接合を考えたものづくり-溶接継手の疲労寿命改善からバルク材の直接接合・電子デバイスの電極まで-
伊藤 和博, 小濱 和之
第12回産学連携シンポジウム 2015/05
Synthesis using Cu(Ti) alloy films for self-forming functionality in electronic devices
Kazuhiro ITO
AUN/SEED-NET Regional Conference on Materials Engineering 2014 2014/11
ガラス上非晶質SixGe1-x薄膜の軟X線結晶化
松尾 直人, 部家 彰, 伊藤 和博, 高橋 誠, 神田 一浩, 望月 孝晏, 宮本 修治
日本金属学会2014年秋期講演大会(第155回) 2014/09
電子デバイス用Cu配線におけるCu合金膜を用いた複数機能一体形成
伊藤 和博
日本金属学会2014年秋期講演大会(第155回) 2014/09
Friction Stir Processing Increasing Fatigue Strength of Arc-Welded Steel Plates
K. Ito, T. Okuda, R. Yamazaki, K. Kohama, R. Ueji, H. Fujii, C. Shiga
Japan-Indonesia Welding Seminar 2014 2014/05
Low-temperature synthesis of Cu interconnects on glass using Cu(Mg) alloy films
Kazuyuki Kohama, Kazuhiro Ito
TMS2014 Annual Meeting & Exhibition 2014/02
Synthesis of low contact-resistance Cu'Ti)/ITO junctions
Kazuhiro Ito
TMS2014 Annual Meeting & Exhibition 2014/02
Cu-interconnect synthesis on glass using Cu(Mg) alloy
Kazuyuki Kohama, Kazuhiro Ito
International Symposium on Interfacial Joining and Surface Technology 2013/11
電子デバイス用Cu配線におけるCu合金膜を用いた複数機能一体形成
伊藤 和博
京都大学工学研究科附属量子理工学教育研究センター 第14回公開シンポジウム 2013/10
電子デバイスへのCu配線形成のための金属材料学的アプローチ
伊藤 和博
第1回エレクトロニクス薄膜材料研究会 2013/09
Integration of various functions using Ti as an alloy element for Cu interconnects in electronic devices
Kazuhiro Ito
韓国金属材料学会2013春期大会 2013/04
Development of new oxidation resistant coating materials based on niobium-alminosilicide and molybdenum-borosilicide for Nb and Mo alloys.
2000 - 2002
ニオブアルミノシリサイド及びモリブデンボロシリサイドをベースとするNb及びMo合金用耐酸化性コーティング材の開発
2000 - 2002
ALUMINUM MEMBER AND MANUFACTURING METHOD THEREOF
ITO Kazuhiro, YAMAMOTO Hajime, NAGATA Akira, HOSHIKAWA Hiroaki
ZL202180059555.1
出願日:2023/01/19
登録日:2024/12/27
アルミニウム部材およびその製造方法
伊藤 和博, 山本 啓, 永田 章, 星河 浩介
出願日:2020/07
登録日:2022/02
溶接部の改質方法
藤井 英俊, 伊藤 和博, 上路 林太郎, 志賀 千晃, 森貞 好昭
特許第6606730号
出願日:2014/08
登録日:2019/11
半導体配線の製造方法
大西 隆, 水野 雅夫, 坂本 真之, 佐藤 大樹, 小濱 和之, 伊藤 和博, 村上 正紀
出願日:2009/01/20
半導体配線
大西 隆, 水野 雅夫, 伊藤 弘高, 小濱 和之, 伊藤 和博, 着本 享, 村上 正紀
出願日:2008/07/14
III族窒化物系化合物半導体基板の製造方法
池本 由平, 佐藤 峻之, 平田 宏治, 伊藤 和博, 村上 正紀, 着本 享
出願日:2008/02/01
半導体配線の製造方法
大西 隆, 武田 実佳子, 水野 雅夫, 着本 享, 可部 達也, 森田 敏文, 守山 実希, 伊藤 和博, 村上 正紀
出願日:2006/07/12
半導体配線の製造方法
大西 隆, 水野 雅夫, 武田 実佳子, 着本 享, 可部 達也, 森田 敏文, 守山 実希, 伊藤 和博, 村上 正紀
出願日:2006/03/20
半導体素子及びその製造方法
池本 由平, 平田 宏治, 内田 悠, 李 相陳, 伊藤 和博, 着本 享, 村上 正紀
出願日:2006/03/17
発光素子およびその製造方法
池本 由平, 平田 宏治, 伊藤 和博, 内田 悠, 着本 享, 村上 正紀
出願日:2006/02/27
半導体デバイス、及びその電極の製造方法
濱口 達史, 守山 実希, 着本 享, 伊藤 和博, 柴田 直樹, 村上 正紀
出願日:2005/06/29
半導体素子及びその製造方法。
村上 正紀, 渡邉 哲平, 着本 享, 伊藤 和博, 伊藤 潤, 守山 実希, 柴田 直樹
特許第4345626号
出願日:2004/09/27
Nb−Si−Al−Cr四元系合金とその製造方法
村上 敬, 伊藤 和博, 山口 正治
特許第3694743号
出願日:2002/03/26
耐酸化被覆ニオブ基合金及びその製造方法
村上 敬, 伊藤 和博, 山口 正治
出願日:2002/02/26
アルミニウム部材およびその製造方法
伊藤 和博、山本 啓
出願日:2020/07
溶接部の改質方法
藤井 英俊, 伊藤 和博, 志賀 千晃, 上路 林太郎, 森貞 好昭
出願日:2013/11
Compressive residual stress applied to a low-carbon steel surface alloyed with WC tool constituent elements according to friction stir processing
Yamamoto Hajime, Yamamoto Yuji, Ito Kazuhiro, Mikami Yoshiki
Materials and Design Vol. 244 2024/08/01
Synthesis Using Cu(Ti) Alloy Films for Self-Forming Functionality in Electronic Devices
Kohama Kazuyuki, Ito Kazuhiro
Transactions of JWRI Vol. 43 No. 2 p. 37-43 2014/12
Effects of Reducing Annealing Temperature on Ni/Al Ohmic Contacts to n- and p-Type 4H-SiC
Ito Kazuhiro, Takeda Hidehisa, Shirai Yasuharu, Murakami Masanori
Transactions of JWRI Vol. 41 No. 2 p. 33-38 2012/12
