顔写真

PHOTO

Ogino Yosuke
荻野 陽輔
Ogino Yosuke
荻野 陽輔
Graduate School of Engineering Division of Materials and Manufacturing Science, Associate Professor
ogino mapse.eng.osaka-u.ac.jp

Research History 4

  1. 2021/10 - Present
    大阪大学 大学院工学研究科 マテリアル生産科学専攻 准教授

  2. 2015/11 - 2021/09
    大阪大学 大学院工学研究科 マテリアル生産科学専攻 助教

  3. 2014/04 - 2015/11
    大阪大学 大学院工学研究科 三菱電機生産コンバージング・テクノロジー共同研究講座 特任助教

  4. 2012/04 - 2014/03
    日本学術振興会特別研究員(DC2)

Education 3

  1. Osaka University Graduate School of Engineering

    - 2014/03

  2. Osaka University Graduate School of Engineering

    - 2011/03

  3. Osaka University Faculty of Engineering

    - 2009/03

Professional Memberships 3

  1. 精密工学会

  2. スマートプロセス学会

  3. 溶接学会

Research Areas 3

  1. Manufacturing technology (mechanical, electrical/electronic, chemical engineering) / Manufacturing and production engineering /

  2. Manufacturing technology (mechanical, electrical/electronic, chemical engineering) / Fluid engineering /

  3. Nanotechnology/Materials / Material fabrication and microstructure control /

Awards 21

  1. 2024年度溶接学会ベストオーサー賞

    荻野陽輔 一般社団法人溶接学会 2025/04

  2. 溶接アーク物理研究賞

    荻野陽輔, 佐藤祐理子, 大串隼士, 佐野智一 一般社団法人溶接学会溶接法研究委員会 2024/08

  3. 溶接アーク物理研究賞

    佐藤祐理子, 荻野陽輔, 佐野智一 溶接学会 溶接法研究委員会 2023/08

  4. スマートプロセス学会学術奨励賞

    荻野陽輔 スマートプロセス学会 2022/11

  5. 溶接物理・技術奨励賞

    江田賢司, 荻野陽輔, 浅井知, 佐野智一 溶接学会 溶接法研究委員会 2022/08

  6. 溶接物理・技術奨励賞

    佐藤祐理子, 江田賢司, 荻野陽輔, 浅井知 溶接学会 溶接法研究委員会 2022/08

  7. 溶接物理・技術奨励賞

    荻野陽輔, 今井航太, 浅井知, 辻村吉寛, 仲村晋一朗, 小川剛史 一般社団法人溶接学会 溶接法研究委員会 2021/08

  8. 木原賞

    荻野陽輔 公益財団法人 溶接接合工学振興会 2020/05

  9. Best industrial Award

    Satoru Asai, Yousuke Ogino, Kazufumi Nomura, Kazunori Hattori the Ineternational Conference on Progress in Digital and Physical Manufacturing 2019/10

  10. 溶接アーク物理研究賞

    荻野陽輔, 福本智, 浅井知, 津山忠久 溶接学会 溶接法研究委員会 2019/08

  11. 応用力学論文賞

    堤成一郎, 清川裕樹, Riccardo Fincato, 荻野陽輔, 平田好則, 浅井知 土木学会応用力学委員会 2019/06

  12. 溶接物理・技術奨励賞

    江田賢司, 荻野陽輔, 浅井知 一般社団法人溶接学会 溶接法研究委員会 2018/08

  13. 2017' Welding in the World Best Paper' Award

    Y. Ogino, Y. Hirata, S. Asai IIW 2018/07

  14. 溶接アーク物理研究賞

    荻野陽輔, 平田好則 溶接学会 溶接法研究委員会 2016/08

  15. 溶接学会論文奨励賞

    荻野陽輔 溶接学会 2016/04

  16. 溶接アーク物理研究賞

    荻野陽輔, 平田好則 溶接学会 溶接法研究委員会 2015/08

  17. 溶接物理・技術奨励賞

    荻野陽輔, 河田純一, 平田好則, 野村和史 一般社団法人溶接学会 2013/11

  18. 海外発表論文奨励賞

    荻野陽輔 生産技術振興協会 2013/07

  19. 溶接学会研究発表賞

    荻野陽輔 溶接学会 2012/04

  20. 溶接物理・技術奨励賞

    荻野陽輔, 野村和史, 平田好則 社団法人 溶接学会 2010/08

  21. 平成21年度溶接学会論文賞

    野村和史, 荻野陽輔, 平田好則 社団法人 溶接学会 2010/04

Papers 40

  1. In-situ X-ray imaging of the breakup dynamics of current-carrying molten metal jets during arc discharge

    Yuriko Sato, Takahisa Shobu, Aki Tominaga, Tomokazu Sano, Yosuke Ogino

    Communications Materials Vol. 5 No. 147 2024/08/20 Research paper (scientific journal)

  2. Role of material properties on metal transfer dynamics in gas metal arc welding

    Yuriko Sato, Yosuke Ogino, Tomokazu Sano

    Journal of Materials Processing Technology Vol. 326 p. 118347-118347 2024/05 Research paper (scientific journal)

    Publisher: Elsevier BV
  3. Visualization and control of the free-flight transfer phenomenon in the wire feed control process

    Toshiki Maruyama, Yosuke Ogino, Tomokazu Sano

    Welding in the World Vol. 68 No. 9 p. 2271-2279 2024/03/13 Research paper (scientific journal)

    Publisher: Springer Science and Business Media LLC
  4. Process parameters and their effect on metal transfer in gas metal arc welding: a driving force perspective

    Yuriko Sato, Yosuke Ogino, Tomokazu Sano

    Welding in the World Vol. 68 No. 4 p. 905-913 2024/01/15 Research paper (scientific journal)

    Publisher: Springer Science and Business Media LLC
  5. 2D temperature measurement of molten area in electroslag welding

    S. Nakajima, Y. Ogino, T. Sano, T. Tsuyama, K. Fujiwara, K. Kojima, D. Ohmura, H. Ohnishi

    Vol. 41 No. 2 p. 53s-57s 2023/06 Research paper (scientific journal)

  6. Development of a simulation model of the manual gas tungsten arc welding process and visualization of the welder’s skill

    Y. Ogino, K. Imai, S. Asai, Y. Tsujimura, S. Nakamura, T. Ogawa

    Welding in the World Vol. 66 No. 7 p. 1381-1393 2022/04 Research paper (scientific journal)

    Publisher: Springer Science and Business Media {LLC}
  7. Numerical simulation of liquid bridge breakup in short-circuit transfer process

    Yuriko Sato, Satoshi Eda, Yosuke Ogino, Satoru Asai

    Welding in the World Vol. 66 No. 1 p. 117-133 2022/01 Research paper (scientific journal)

    Publisher: Springer Science and Business Media LLC
  8. Study on Practical Application for In-process Detection Method of Blowholes

    Kazuki KASANO, Yosuke OGINO, Tomokazu SANO, Satoru ASAI

    QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 39 No. 4 p. 334-346 2021/12/28 Research paper (scientific journal)

    Publisher: Japan Welding Society
  9. Weld pool simulation model of FCAW process using TiO2 based flux cored wire

    Yosuke OGINO, Yoshinori HIRATA, Satoru ASAI

    QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 39 No. 4 p. 291-300 2021/12/28 Research paper (scientific journal)

    Publisher: Japan Welding Society
  10. Non-equilibrium modeling of arc plasmas in the gas–metal arc–welding process

    Satoshi Eda, Yosuke Ogino, Satoru Asai, Tomokazu Sano

    Journal of Physics D: Applied Physics Vol. 54 No. 32 p. 325204-325204 2021/08/12 Research paper (scientific journal)

  11. Three-dimensional numerical model of short-circuiting transfer in GMAW

    K. Hashimoto, Y. Hirata, K. Kadota, Y. Ogino

    Welding in the World Vol. 64 No. 12 p. 2011-2017 2020/12 Research paper (scientific journal)

    Publisher: Springer Science and Business Media LLC
  12. 溶接電流・ワイヤ送給制御された短絡移行型溶接プロセスにおいて短絡時の電流が及ぼす効果の数値的検討

    江田賢司, 荻野陽輔, 浅井知

    溶接学会論文集 Vol. 38 No. 4 p. 392-402 2020/11 Research paper (scientific journal)

  13. サブマージアーク溶接プロセスにおける溶込み形成現象の数値シミュレーション

    荻野陽輔, 飯田将裕, 浅井知, 上月渉平, 早川直哉, 池田倫正

    溶接学会論文集 Vol. 38 No. 4 p. 355-362 2020/11 Research paper (scientific journal)

  14. Direct observation and numerical simulation of molten metal and molten slag behavior in electroslag welding process

    Y. Ogino, S. Fukumoto, S. Asai, T. Tsuyama

    Welding in the World Vol. 64 No. 11 p. 1897-1904 2020/11 Research paper (scientific journal)

    Publisher: Springer Science and Business Media LLC
  15. Visualization of arc plasma and molten wire behavior in CO2 arc welding process by three-dimensional numerical simulation

    Y. Ogino, S. Asai, Y. Hirata

    Welding in the World Vol. 64 No. 10 p. 1789-1797 2020/10 Research paper (scientific journal)

    Publisher: Springer Science and Business Media LLC
  16. Observation of welding phenomena with blowholes for detection of welding defects

    Kazuki KASANO, Yosuke OGINO, Satoshi FUKUMOTO, Satoru ASAI, Tomokazu SANO

    QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 38 No. 3 p. 173-182 2020/09 Research paper (scientific journal)

    Publisher: Japan Welding Society
  17. Discussion of the Effect of Shielding Gas and Conductivity of Vapor Core on Metal Transfer Phenomena in Gas Metal Arc Welding by Numerical Simulation

    Yosuke Ogino, Yoshinori Hirata, Satoru Asai

    Plasma Chemistry and Plasma Processing Vol. 40 No. 5 p. 1109-1126 2020/09 Research paper (scientific journal)

    Publisher: Springer Science and Business Media LLC
  18. 画像センシングによる薄板重ねすみ肉溶接のインプロセス溶接品質モニタリング

    新田 誠也, 荻野 陽輔, 浅井 知

    溶接学会論文集 Vol. 38 No. 2 p. 114-124 2020/06 Research paper (scientific journal)

  19. 可視および赤外線波長領域におけるアーク・溶融池発光特性に基づいた溶接現象観察手法の研究―インプロセス溶接モニタリングに向けた画像センシング技術の開発―

    笠野和輝, 荻野陽輔, 福本智, 浅井知

    溶接学会論文集 Vol. 38 No. 2 p. 103-113 2020/06 Research paper (scientific journal)

  20. Numerical simulation of dynamic behavior in controlled short-circuit transfer process

    Satoshi Eda, Yosuke Ogino, Satoru Asai

    Welding in the World Vol. 64 No. 2 p. 353-364 2020/02 Research paper (scientific journal)

    Publisher: Springer Science and Business Media LLC
  21. オンラインアーク溶接画像センシング手法の基礎検証-インプロセスアーク溶接品質管理技術の開発-

    笠野和輝, 荻野陽輔, 浅井知

    溶接学会論文集 Vol. 37 No. 3 p. 108-114 2019/08 Research paper (scientific journal)

  22. 溶融池形成および繰返し弾塑性解析を活用した継手の疲労き裂発生寿命評価

    堤成一郎, 清川裕樹, Riccardo Fincato, 荻野陽輔, 平田好則, 浅井知

    土木学会論文集 A2(応用力学) Vol. 70 No. 2 p. I_337-I_347 2019/01 Research paper (scientific journal)

  23. Numerical study of influence of gap between plates on weld pool formation in arc spot welding process

    S. Eda, Y. Ogino, S. Asai, Y. Hirata

    Welding in the World Vol. 62 p. 1021-1030 2018/06 Research paper (scientific journal)

  24. 3次元溶滴移行モデルによる自由移行現象解析

    荻野陽輔, 平田好則, 木花翔吾, 新田夏規

    溶接学会論文集 Vol. 36 No. 1 p. 94-103 2018/03 Research paper (scientific journal)

  25. Numerical simulation of WAAM process by a GMAW weld pool model

    Y. Ogino, S. Asai, Y. Hirata

    Welding in the World Vol. 62 No. 2 p. 393-401 2018/01/27 Research paper (scientific journal)

    Publisher: Springer Science and Business Media LLC
  26. Numerical simulation of arc plasma and molten metal behavior in gas metal arc welding process

    Y. Ogino, Y. Hirata, S. Asai

    Journal of Fluid Science and Technology Vol. 13 No. 4 2017/11 Research paper (scientific journal)

  27. Numerical simulation of metal transfer in pulsed-MIG welding

    Y. Ogino, Y. Hirata, S. Asai

    Welding in the World Vol. 61 No. 6 p. 1289-1296 2017/06/20 Research paper (scientific journal)

  28. Numerical model of weld pool phenomena with various joint geometries and welding positions

    OGINO Yosuke, TAKABE Yoshihiro, HIRATA Yoshinori, ASAI Satoru

    QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 35 No. 1 p. 13-20 2017/01 Research paper (scientific journal)

    Publisher: JAPAN WELDING SOCIETY
  29. A unified numerical model of MIG welding process

    Yosuke OGINO, Yoshinori HIRATA

    QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 34 No. 1 p. 35-41 2016/03/15 Research paper (scientific journal)

    Publisher: Japan Welding Society
  30. Numerical simulation of GMA short-circuiting transfer process by control of welding current and wire feed

    NITTA Natsuki, KIHANA Shogo, OGINO Yosuke, HIRATA Yoshinori

    QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 34 No. 1 p. 50-56 2016/03 Research paper (scientific journal)

    Publisher: JAPAN WELDING SOCIETY
  31. Numerical simulation of GMAW process using Ar and an Ar–CO2 gas mixture

    Yosuke Ogino, Yoshinori Hirata, Anthony B. Murphy

    Welding in the World Vol. 60 No. 2 p. 345-353 2016/01/13 Research paper (scientific journal)

  32. チタニア系フラックス入りワイヤを用いた立向上進マグ溶接現象

    細井宏一, 平田好則, 荻野陽輔, 河野秀規

    スマートプロセス学会誌 Vol. 5 No. 1 p. 95-100 2016/01 Research paper (scientific journal)

  33. Numerical simulation of GMA metal transfer phenomena including arc plasma

    Yosuke Ogino, Yoshinori Hirata

    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society Vol. 33 No. 1 p. 1-12 2015/01/27 Research paper (scientific journal)

    Publisher: Japan Welding Society
  34. Numerical simulation of metal transfer in argon gas-shielded GMAW

    Yosuke Ogino, Yoshinori Hirata

    Welding in the World Vol. 59 No. 4 p. 465-473 2015/01/25 Research paper (scientific journal)

  35. Numerical analysis of arc plasma and weld pool formation by a tandem TIG arc

    Yosuke Ogino, Yoshinori Hirata, Junichi Kawata, Kazufumi Nomura

    Welding in the World 2013/03/19 Research paper (scientific journal)

  36. Heat Input and Pressure Distribution of Tig Arc on Groove Surface

    Yosuke Ogino, Yoshinori Hirata, Kazufumi Nomura

    Welding in the World Vol. 55 No. 11-12 p. 107-113 2011/11 Research paper (scientific journal)

  37. Numerical analysis of the heat source characteristics of a two-electrode TIG arc

    Y Ogino, Y Hirata, K Nomura

    Journal of Physics D: Applied Physics Vol. 44 No. 21 p. 215202-215202 2011/05/06 Research paper (scientific journal)

  38. Features of Magnetic Controlled TIG Arc Plasma - Modeling and Experiment

    K. Nomura, Y. Ogino, K. Murakami, Y. Hirata

    Vol. 9 p. 83-91 2011/01 Research paper (scientific journal)

  39. Numerical analysis of arc plasma behavior in groove welding with 3D TIG arc model?

    Yosuke Ogino, Kazufumi Nomura, Yoshinori Hirata

    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society Vol. 28 No. 1 p. 10-15 2010/01/28 Research paper (scientific journal)

  40. Shape control of TIG arc plasma by cusp type magnetic field with permanent magnets

    Kazufumi Nomura, Yousuke Ogino, Yoshinori Hirata

    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society Vol. 27 No. 3 p. 170-175 2009 Research paper (scientific journal)

Misc. 27

  1. Current Status and Future Prospects of Numerical Simulation of Arc Welding Process

    Yosuke OGINO

    JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 93 No. 3 p. 154-158 2024/04

    Publisher: Japan Welding Society
  2. Recent Progresses and Future Prospects of Science and Technology in Welding Process

    Yosuke OGINO, Kazufumi NOMURA, Hisaya KOMEN, Houichi KITANO, Manabu TANAKA

    JOURNAL OF THE JAPAN WELDING SOCIETY Vol. 92 No. 5 p. 309-319 2023/07

    Publisher: Japan Welding Society
  3. ガスメタルアーク溶接におけるアークプラズマおよび溶滴移行現象

    荻野陽輔

    溶接学会誌 Vol. 92 No. 4 p. 236-245 2023/06 Article, review, commentary, editorial, etc. (scientific journal)

  4. 浪速博士の溶接がってん!R 溶滴移行現象ってなんで変わる?の巻

    荻野陽輔

    WE-COMマガジン Vol. 47 2023/01 Article, review, commentary, editorial, etc. (trade magazine, newspaper, online media)

  5. プロセスシミュレーション:GMA溶接プロセスの溶融池シミュレーション技術とAMプロセスへの展開

    荻野陽輔

    WE-COMマガジン Vol. 47 2023/01 Article, review, commentary, editorial, etc. (trade magazine, newspaper, online media)

  6. GMA溶接におけるアークプラズマと溶滴移行現象の数値シミュレーション

    荻野陽輔

    スマートプロセス学会誌 Vol. 11 p. 80-85 2022/05 Article, review, commentary, editorial, etc. (scientific journal)

  7. Joint Intermediate Meeting of IIW Comm. I, IV, XII and SG 212出席報告

    荻野陽輔

    溶接学会誌 Vol. 90 No. 6 p. 41-42 2021/09 Meeting report

  8. 実験計測技術と数値シミュレーション技術の連携による溶接士技能評価技術の開発

    荻野陽輔, 今井航太, 浅井知, 辻村吉寛, 仲村晋一朗, 小川剛史

    溶接技術 Vol. 69 No. 7 p. 89-92 2021/07 Article, review, commentary, editorial, etc. (scientific journal)

  9. GMAW溶融池モデルを活用したワイヤ-アーク金属積層造形シミュレーション

    荻野陽輔

    溶接学会誌 Vol. 90 No. 2 p. 98-101 2021/03 Article, review, commentary, editorial, etc. (scientific journal)

  10. 見えないものを観て知る ~新溶接技術開発の裏側~ (2)エレクトロスラグ溶接の観える化

    荻野陽輔

    WE-COMマガジン Vol. 38 2020/10 Article, review, commentary, editorial, etc. (trade magazine, newspaper, online media)

  11. 第II部 溶接・接合工学の最近の動向、I溶接法研究委員会

    浅井知, 田中学, 山根敏, 宮坂史和, 茂田正哉, 野村和史, 荻野陽輔

    溶接学会誌 Vol. 89 No. 5 p. 322-335 2020/07 Article, review, commentary, editorial, etc. (scientific journal)

  12. 疲労寿命延伸効果に対する付加溶接プロセス条件の影響評価

    清川裕樹, 堤成一郎, RICCARDO Fincato, 荻野陽輔, 平田好則, 浅井知

    土木学会関西支部年次学術講演会講演概要集(CD-ROM) Vol. 2018 2018/04/25

  13. ここまで見える!アーク溶接の可視化シミュレーション (1)溶接アークと溶融池形成シミュレーション

    荻野陽輔

    WE-COMマガジン Vol. 27 2018/01 Article, review, commentary, editorial, etc. (trade magazine, newspaper, online media)

  14. 溶融池形成解析により得られる溶接ビード形状とHAZ強度特性を反映した疲労き裂発生寿命予測

    北村拓也, 堤成一郎, RICCARDO Fincato, 荻野陽輔, 平田好則, 浅井知

    土木学会関西支部年次学術講演会講演概要集(CD-ROM) Vol. 2017 2017/05/01

  15. Development of prediction technique of weld pool formation with heat source model

    Satoru Asai, Manabu Tanaka, Yousuke Kawahito, Masaya Shigeta, Kazufumi Nomura, Tomoki Matsuda, Yosuke Ogino

    Yosetsu Gakkai Shi/Journal of the Japan Welding Society Vol. 86 No. 1 p. 27-31 2017/01 Article, review, commentary, editorial, etc. (scientific journal)

  16. Development of numerical models of the weld pool and the heat source in gas metal arc welding

    Yosuke Ogino

    Yosetsu Gakkai Shi/Journal of the Japan Welding Society Vol. 86 No. 1 p. 32-37 2017 Article, review, commentary, editorial, etc. (scientific journal)

    Publisher: Japan Welding Society
  17. アーク溶接最新研究事情―アーク溶接プロセスのモニタリングとシミュレーション―

    浅井知, 野村和史, 荻野陽輔

    溶接技術 Vol. 64 p. 72-77 2016/09 Article, review, commentary, editorial, etc. (trade magazine, newspaper, online media)

  18. じょうほう通 The 5th EAST-WJ 出席報告

    荻野陽輔

    溶接学会誌 Vol. 85 No. 2 p. 229-231 2016/04 Meeting report

  19. アーク現象の解明が溶接を革新する

    田中学, 平田好則, 茂田正哉, 野村和史, 荻野陽輔

    溶接技術 2015/07 Article, review, commentary, editorial, etc. (trade magazine, newspaper, online media)

  20. Numerical simulation of welding arc phenomena including metal transfer

    Yosuke Ogino

    Yosetsu Gakkai Shi/Journal of the Japan Welding Society Vol. 84 No. 4 p. 251-254 2015 Article, review, commentary, editorial, etc. (scientific journal)

    Publisher: Japan Welding Society
  21. Measurements and numerical simulations in arc welding processes

    Yoshinori Hirata, Manabu Tanaka, Masaya Shigeta, Kazufumi Nomura, Yosuke Ogino

    Yosetsu Gakkai Shi/Journal of the Japan Welding Society Vol. 84 No. 1 p. 19-24 2015

    Publisher: Japan Welding Society
  22. Egg of welding

    Yosuke Ogino

    Yosetsu Gakkai Shi/Journal of the Japan Welding Society Vol. 83 No. 4 p. 291-293 2014

    Publisher: Japan Welding Society
  23. Numerical Analysis of Welding Arc Plasma by Three Dimensional Arc Model

    Y. Ogino, Y. Hirata, K. Nomura

    2012/12

  24. Control of Welding Arc Plasma by using Magnets

    Y. Hirata, K. Nomura, Y. Ogino

    Journal of Plasma and Fusion Research 2011/10

  25. 集まれエンジニア!「永久磁石によるTIGアークプラズマの磁気偏向制御」

    野村和史, 荻野陽輔, 芳賀拓弥, 平田好則

    溶接学会誌 Vol. 80 No. 3 p. 8-11 2011/03

  26. Numerical analysis on heat source characteristics of two-electrodes TIG arc

    Nomura Kazufumi, Ogino Yosuke, Hirata Yoshinori

    Transactions of JWRI Vol. 39 No. 2 p. 204-206 2010/12

    Publisher: Joining and Welding Research Institute, Osaka University
  27. Influence of magnet configurations on magnetic controlled TIG arc welding

    Hirata Yoshinori, Nomura Kazufumi, Ogino Yosuke, Haga Takuya

    Transactions of JWRI Vol. 39 No. 2 p. 209-210 2010/12

    Publisher: Joining and Welding Research Institute, Osaka University

Publications 2

  1. 入門金属3Dプリンター技術

    一般社団法人日本溶接協会AM部会技術委員会

    産報出版 2024/09/01

    ISBN: 4883180700

  2. 新溶接アーク現象

    溶接学会溶接法研究委員会

    産報出版(株) 2021/06/01

Presentations 203

  1. Development of additive manufacturing process by arc plasma driven metal jet

    Yoichi Doi, Ryusei Furukubo, Tomokazu Sano, Yosuke Ogino

    78th IIW Annual Assembly and International Conference 2025/06/25

  2. Metal transfer and bead formation control by wire feeding control in Al-MIG welding process

    Yosuke Ogino, Toshiki Maruyama, Tomokazu Sano

    78th IIW Annual Assembly and International Conference 2025/06/23

  3. Experimental study on the driving force for metal transfer control in 'Pulsed Gas MAG' welding

    Kohei Fujiwara, Tadahisa Tsuyama, Yosuke Ogino, Masahiro Ohara, Kazufumi Nomura, Takashi Mizuguchi

    78th IIW Annual Assembly and International Conference 2025/06/23

  4. 電流経路制御に基づく溶滴移行現象制御とAMプロセスへの活用

    荻野陽輔, 佐藤祐理子, 土井央一, 古久保隆星, 佐野智一

    2024年度第4回AM部会技術委員会 2025/03/21

  5. 微細WAAMプロセスに向けた細径ワイヤGMA溶接プロセスにおける溶滴移行ならびに溶融池形成現象

    荻野陽輔, 廣田稜己, 佐野智一

    2025年度精密工学会春季大会 2025/03/17

  6. Influence of the wire diameter on the metal transfer and bead formation phenomena in GMA welding process

    Yosuke Ogino, Itsuki Hirota, Tomokazu Sano

    Joint Intermediate Meeting of IIW Comm. I, IV and XII 2025/03/10

  7. アークプラズマによって駆動するメタルジェットを利用した造形プロセスの開発

    荻野陽輔, 土井央一, 古久保隆星, 佐野智一

    溶接学会第268回溶接法研究委員会 2025/01/28

  8. CFD simulation of the GMA welding process and its application to the WAAM process

    Y. Ogino

    CAWE-AM 2024 2024/10/18

  9. 微細WAAMプロセスに向けた細径ワイヤGMA溶接プロセスにおける溶滴移行現象の基礎的研究

    荻野陽輔

    溶接学会2024年度秋季全国大会 2024/09/05

  10. 円柱軸材のサブマージアーク溶接における溶込み形成の数値シミュレーションとその検証

    川村昂志, 荻野陽輔, 本間祐太

    溶接学会2024年度秋季全国大会 2024/09/06

  11. パルスガスMAG溶接法の開発 第5報 ワイヤ径に応じた溶接条件の検討

    藤原康平, 津山忠久, 荻野陽輔, 小原昌弘, 水口隆

    溶接学会2024年度秋季全国大会 2024/09/04

  12. 細径電極ワイヤを用いたミグ溶接プロセスに関する研究

    廣田稜己, 佐野智一, 荻野陽輔

    溶接学会2024年度秋季全国大会 2024/09/05

  13. アークプラズマ駆動メタルジェットによる造形プロセスの開発

    土井央一, 佐野智一, 荻野陽輔

    溶接学会2024年度秋季全国大会 2024/09/05

  14. 外部磁場がガスメタルアーク溶接の熱源およびビード形成現象に及ぼす影響

    渡部公規, 佐野智一, 荻野陽輔

    溶接学会2024年度秋季全国大会 2024/09/04

  15. ワイヤ送給制御プロセスにおける溶滴自由移行現象の数値解析

    丸山敏生, 佐野智一, 荻野陽輔

    溶接学会2024年度秋季全国大会 2024/09/04

  16. 透過X線観察によるガスメタルアーク溶接における溶滴内部流動の可視化

    佐藤祐理子, 菖蒲敬久, 冨永亜希, 佐野智一, 荻野陽輔

    溶接学会2024年度秋季全国大会 2024/09/04

  17. ワイヤ送給制御プロセスによる低電流域の溶滴自由移行現象制御

    丸山敏生, 佐野智一, 荻野陽輔

    第266回溶接法研究委員会 2024/08/07

  18. A study on the influence of welding current on metal transfer control in ‘Pulsed Gas MAG’ welding

    Kohei Fujiwara, Tadahisa Tsuyama, Yosuke Ogino, Masahiro Ohara, Takashi, Mizuguchi

    The 77th IIW Annual Assembly 2024/07/10

  19. In-situ measurement and numerical simulation of molten wire flow and temperature distribution in GMA welding process

    Yosuke Ogino, Yuriko Sato, Sota Nakajima, Takahisa Shobu, Aki Tominaga, Tomokazu Sano

    The 77th IIW Annual Assembly 2024/07/10

  20. In-situ X-ray imaging for metal transfer dynamics in gas metal arc welding

    Yuriko Sato, Takahisa Shobu, Aki Tominaga, Tomokazu Sano, Yosuke Ogino

    The 77th IIW Annual Assembly 2024/07/10

  21. Impact of arc heating on droplet temperature map in GMAW

    Y. Sato, S. F. Goecke, Y. Ogino, T. Sano

    Joint intermediate meeting of IIW Comm. I, IV and XII 2024/03/05

  22. Visualization of Heat Source Properties and Molten Pool Formation in WAAM Process by Numerical Simulation

    Y. Ogino, T. Sano

    MRM2023/IUMRS-ICA2023 2023/12/15

  23. 細径電極ワイヤを用いたミグ溶接における溶滴移行現象の可視化とその制御

    廣田稜己, 荻野陽輔, 佐野智一

    2023年度スマートプロセス学会学術講演会 2023/11/10

  24. ワイヤ送給制御プロセスにおける溶滴自由移行現象の可視化とその制御

    丸山敏生, 荻野陽輔, 佐野智一

    2023年度スマートプロセス学会学術講演会 2023/11/10

  25. 細径電極ワイヤを用いたミグ溶接における溶滴移行現象の可視化とその制御

    廣田稜己, 荻野陽輔, 佐野智一

    溶接学会2023年度秋季全国大会 2023/09/13

  26. ワイヤ送給制御プロセスにおける溶滴自由移行現象の可視化とその制御

    丸山敏生, 荻野陽輔, 佐野智一

    溶接学会2023年度秋季全国大会 2023/09/13

  27. ガスメタルアーク溶接の現象解明に関する最近の動向

    荻野陽輔

    溶接学会2023年度秋季全国大会 2023/09/14

  28. ミグ溶接におけるワイヤ材質が 溶滴移行現象に及ぼす影響に関する考察

    荻野陽輔, 佐藤祐理子, 大串隼士, 佐野智一

    第262回溶接法研究委員会 2023/08/08

  29. Visualization and control of free-flight transfer phenomenon in wire feed control process

    T. Maruyama, Y. Ogino, T. Sano

    The 76th IIW Annual Assembly 2023/07/19

  30. Role of material properties on metal transfer dynamics in gas metal arc welding

    Y. Sato, Y. Ogino, T. Sano

    The 76th IIW Annual Assembly 2023/07/19

  31. Influence of the temperature dependence of the wire surface tension on the metal transfer phenomena in MIG welding process

    Y. Ogino, T. Sano

    The 76th IIW Annual Assembly 2023/07/19

  32. Development of a weld quality monitoring technique by coupling numerical simulation and visual sensing

    Y. Ogino, S. Nitta, S. Asai, T. Sano

    THERMEC’2023 International Conference on Processing & Manufacturing of Advanced Materials 2023/07/05

  33. 数値シミュレーションによるアーク溶接プロセスの可視化技術とその展開

    荻野陽輔

    溶接学会2023年度関西支部講演会 2023/06/30

  34. ガスメタルアーク溶接における溶滴移行挙動に及ぼすワイヤ物性の影響

    佐藤祐理子, 荻野陽輔, 佐野智一

    溶接学会2023年度春季全国大会 2023/04/25

  35. Influence of wire feed rate on metal transfer in gas metal arc welding

    Y. Sato, Y. Ogino, T. Sano

    Joint intermediate meeting of IIW Comm. I, IV and XII 2023/02/27

  36. ガスメタルアーク溶接における溶滴移行挙動に及ぼすアーク形状の影響

    佐藤祐理子, 荻野陽輔, 佐野智一

    スマートプロセス学会2022年度学術講演会 2022/11/15

  37. Development of weld quality monitoring technique by using a visual sensor and numerical simulation

    Y. Ogino, S. Nitta, S. Asai, T. Sano

    Visual-JW 2022 2022/10/26

  38. 2D temperature measurement of molten area in electroslag welding

    S. Nakajima, Y. Ogino, T. Sano, T. Tsuyama, K. Fujiwara, K. Kojima, D. Ohmura, H. Ohnishi

    Visual-JW 2022 2022/10/26

  39. Influence of welding wire materials o driving force balance in metal transfer phenomenon

    Y. Sato, Y. Ogino, T. Sano

    Visual-JW 2022 2022/10/26

  40. Discussion of dominant factor of metal transfer by a simplified numerical simulation model

    H. Ohgushi, Y. Ogino, T. Sano

    Visual-JW 2022 2022/10/26

  41. エレクトロスラグ溶接における溶融部の2次元温度分布計測

    中島颯汰, 荻野陽輔, 佐野智一, 津山忠久, 藤原康平, 児嶋一浩, 大村大輔, 大西博之

    溶接学会2022年度秋季全国大会 2022/09/08

  42. 多方向同期観察による溶融池内ガス混入時の溶融池表面・内部溶接現象検証 溶接欠陥形成機構と溶接中センシング情報の相関付けに向けた検討 第2報

    笠野和輝, 荻野陽輔, 佐野智一, 浅井知

    溶接学会2022年度秋季全国大会 2022/09/08

  43. パルスGMA溶接における熱源特性とその溶込み形成現象に及ぼす影響に関する数値シミュレーション

    荻野陽輔, 浅井知, 佐野智一

    溶接学会2022年度秋季全国大会 2022/09/08

  44. 簡易数値シミュレーションモデルによる溶滴移行現象の支配因子に関する考察

    大串隼士, 荻野陽輔, 佐野智一

    溶接学会2022年度秋季全国大会 2022/09/08

  45. 溶滴移行現象におけるアーク形状に基づく電磁力の評価

    佐藤祐理子, 荻野陽輔, 佐野智一

    溶接学会2022年度秋季全国大会 2022/09/08

  46. Difference of the metal transfer phenomena in MIG welding process using a steel and an aluminum alloy wire electrode

    Y. Ogino, H. Ohgushi, T. Sano, A. B. Murphy

    The 75th IIW Annual Assembly 2022/07/21

  47. Influence of radial and axial electromagnetic force in metal transfer phenomenon

    Y. Sato, Y. Ogino, T. Sano

    The 75th IIW Annual Assembly 2022/07/21

  48. Introduction of young professional group in JWS (WELNET) and current stage of the numerical simulation technique of arc welding process

    Yosuke Ogino

    IIW International Conference on Welding and Joining 2022/07/18

  49. ガスメタルアーク溶接における自由移行形態の遷移挙動に関する研究

    佐藤祐理子, 荻野陽輔, 佐野智一

    溶接学会2022年度春季全国大会 2022/04/13

  50. 溶滴移行現象に及ぼす表面張力温度依存性の影響に関する考察

    荻野陽輔, 佐野智一

    溶接学会2022年度春季全国大会 2022/04/13

  51. 溶融池内部溶接現象の直接観察手法の基礎的検証 溶接欠陥形成機構と溶接中センシング情報の相関付けに向けた検討 第1報

    笠野和輝, 荻野陽輔, 佐野智一, 浅井知

    溶接学会2022年度春季全国大会 2022/04/13

  52. パルスガスMAG溶接法の開発 第3報 アーク雰囲気のガス組成変化による溶滴移行シミュレーション

    藤原康平, 津山忠久, 荻野陽輔, 小原昌弘

    溶接学会2022年度春季全国大会 2022/04/13

  53. Numerical simulation of laser metal deposition process by using a weld pool model

    Y. Ogino, R. Arashi, S. Asai

    Joint intermediate meeting of IIW Comm. I, IV and XII 2022/03/21

  54. A new evaluation method for electromagnetic force in metal transfer phenomenon

    Y. Sato, Y. Ogino, T. Sano

    2022/03/21

  55. ガスメタルアーク溶接のエネルギー源および溶込み形成現象の数値シミュレーション

    荻野陽輔

    日本溶接協会電気溶接機部会技術員会2021年度溶接技術講演会 2022/02/04

  56. 画像センシングによるインプロセス溶接欠陥検知技術の実用化に向けた研究

    笠野和輝, 荻野陽輔, 佐野智一, 浅井知

    第256回溶接法研究委員会・第248回溶接冶金研究委員会 2022/01/25

  57. 溶接プロセスの数値シミュレーション技術とAMプロセスへの展開

    荻野陽輔

    日本溶接協会2021年度3D積層造形技術委員会(第3回) 2021/12/17

  58. パルスマグ溶接プロセスの熱源および溶込み形成シミュレーション

    荻野陽輔, 浅井知, 佐野智一

    スマートプロセス学会2021年度学術講演会 2021/11/15

  59. アーク直下での気泡発生現象モニタリングによるブローホール発生検知指標の検討 インプロセスアーク溶接品質管理技術の開発第8報

    笠野和輝, 荻野陽輔, 佐野智一, 浅井知

    溶接学会2021年度秋季全国大会 2021/09/21

  60. Additive Manufacturingプロセスの数値シミュレーション技術の開発

    荻野陽輔

    日本溶接協会2021年度第2回特殊材料溶接研究委員会本委員会(AM組織・欠陥制御SG合同委員会) 2021/09/07

  61. 電極の溶融・変形を考慮したガスメタルアーク溶接の非平衡モデリング

    江田賢司, 荻野陽輔, 浅井知, 佐野智一

    第254回溶接法研究委員会 2021/08/03

  62. 短絡移行プロセスにおける橋絡液柱破断現象の数値解析

    佐藤祐理子, 江田賢司, 荻野陽輔, 浅井知

    第254回溶接法研究委員会 2021/08/03

  63. Numerical simulation of the pulsed-MAG welding process from the heat source properties to the weld pool formation

    Y. Ogino, S. Asai, T. Sano

    74th Annual Assembly of IIW 2021/07/17

  64. Study on blow hole detection technology using image sensing method with deep learning

    K. Kasano, Y. Ogino, T. Sano, S. Asai

    74th Annual Assembly of IIW 2021/07/15

  65. Non-equilibrium modeling of gas metal arc welding process with molten metal behavior

    S. Eda, Y. Ogino, S. Asai, T. Sano

    74th Annual Assembly of IIW 2021/07/14

  66. Additive Manufacturingプロセスの数値シミュレーションとモニタリング技術の開発

    荻野陽輔, 嵐亮介, 中山知哉, 浅井知

    第250回溶接法研究委員会 2021/05/28

  67. ガスメタルアーク溶接の非平衡モデルにおける電極近傍領域の取り扱いに関する検討

    江田賢司, 荻野陽輔, 浅井知, 佐野智一

    溶接学会2021年度春季全国大会 2021/04/14

  68. アーク直下気泡発生現象と気孔欠陥発生との相関性検証―インプロセスアーク溶接品質管理技術の開発 第7報―

    笠野和輝, 荻野陽輔, 佐野智一, 浅井知

    溶接学会2021年度春季全国大会 2021/04/14

  69. Development of weld quality monitoring technique by using a visual sensor and numerical simulation

    Yosuke Ogino, Seiya Nitta, Satoru Asai, Tomokazu Sano

    Joint intermediate meeting of IIW Comm. I, IV, XII and SG212 2021/03/30

  70. サブマージアーク溶接プロセスにおける溶込み形成現象の数値シミュレーション

    荻野陽輔

    日本溶接協会2020年度第3回ろう部会技術委員会 先端材料接合委員会 2021/03/19

  71. ガスメタルアーク溶接におけるアークプラズマの非平衡モデリング

    江田賢司, 荻野陽輔, 浅井知, 佐野智一

    第252回溶接法研究委員会 2020/11

  72. ガスメタルアーク溶接におけるアークプラズマの非平衡モデリング

    江田賢司, 荻野陽輔, 浅井知, 佐野智一

    溶接学会2020年度秋季全国大会 2020/09

  73. 短絡移行プロセスにおける橋絡液柱破断現象の数値解析

    佐藤祐理子, 江田賢司, 荻野陽輔, 浅井知

    溶接学会2020年度秋季全国大会 2020/09

  74. アーク発光特性に基づいた溶接現象モニタリング手法の検証

    笠野和輝, 荻野陽輔, 福本智, 佐野智一, 浅井知

    溶接学会2020年度秋季全国大会 2020/09

  75. プライマー塗布隅肉継手溶接中における気孔溶接欠陥発生時の溶接現象観察

    笠野和輝, 荻野陽輔, 佐野智一, 浅井知

    溶接学会2020年度秋季全国大会 2020/09

  76. アーク・溶融池発光特性に基づいた溶接現象モニタリング手法の検証

    荻野陽輔, 福本智, 浅井知, 佐野智一, 笠野和輝

    溶接学会2020年度秋季全国大会 2020/09

  77. 数値シミュレーションによる溶接士技能の可視化

    今井航太, 荻野陽輔, 浅井知, 辻村吉寛, 仲村晋一朗, 小川剛史

    溶接学会2020年度秋季全国大会 2020/09

  78. 数値シミュレーションによる溶接士技能の可視化

    荻野陽輔, 今井航太, 浅井知, 辻村吉寛, 仲村晋一朗, 小川剛史

    第251回溶接法研究委員会 2020/08

  79. Non-equilibrium modeling of arc plasma in gas metal arc welding

    S. Eda, Y. Ogino, S. Asai, T. Sano

    73rd Annual Assembly of IIW 2020/07

  80. Numerical simulation of breakup phenomenon of a liquid bridge in short-circuit transfer process

    Y. Sato, S. Eda, Y. Ogino, S. Asai

    73rd Annual Assembly of IIW 2020/07

  81. Study on welding phenomena observation method in visible and infrared wavelength region with quantitative image analysis

    K. Kasano, Y. Ogino, S. Fukumoto, T. Sano, S. Asai

    73rd Annual Assembly of IIW 2020/07

  82. Visualization of the welder’s skill in manual TIG welding process by numerical simulation

    Y. Ogino, K. Imai, S. Asai, Y. Tsujimura, S. Nakamura, T. Ogawa

    73rd Annual Assembly of IIW 2020/07

  83. プライマー塗布隅肉継手溶接中におけるブローホール発生時の溶接現象観察 インプロセス溶接品質管理技術の開発(第5報)

    笠野和輝, 浅井知, 荻野陽輔

    溶接学会2020年度春季全国大会 2020/04

  84. アーク発光特性に基づいた溶接現象モニタリング手法の開発(第1報) バンドパスフィルタを用いた実験的検証

    笠野和輝, 荻野陽輔, 福本智, 浅井知

    溶接学会2020年度春季全国大会 2020/04

  85. アーク発光特性に基づいた溶接現象モニタリング手法の開発(第2報) 分光計測・数値シミュレーションによる考察

    荻野陽輔, 福本智, 浅井知, 笠野和輝

    溶接学会2020年度春季全国大会 2020/04

  86. 初層裏波ティグ溶接における溶接士技能評価技術の開発(第1報) 裏波形状に影響を与えるパラメータ評価

    辻村吉寛, 仲村晋一朗, 小川剛史, 今井航太, 荻野陽輔, 浅井知

    溶接学会2020年度春季全国大会 2020/04

  87. 初層裏波ティグ溶接における溶接士技能評価技術の開発(第2報) 数値シミュレーションによる検討

    今井航太, 荻野陽輔, 浅井知, 辻村吉寛, 仲村晋一朗, 小川剛史

    溶接学会2020年度春季全国大会 2020/04

  88. 電流・ワイヤ送給制御が短絡移行プロセスに及ぼす効果の数値的検討

    江田賢司, 荻野陽輔, 浅井知

    溶接学会2020年度春季全国大会 2020/04

  89. レーザ焼入れプロセスの数値シミュレーション

    荻野陽輔, 嵐亮介, 浅井知, 水谷雅巳, 富山公博

    2019/12

  90. インプロセス溶接品質管理に向けた溶接部直接観察技術の開発

    笠野和輝, 荻野陽輔, 浅井知

    2019/12

  91. Development of a high-speed welding simulation model by using machine learning

    Y. Ogino, S. Asai, H. Kitano, T. Nakamura

    2019/11

  92. Development of a supporting system of layer design in multi-pass robot welding

    T. Osumi, Y. Ogino, S. Asai, S. Sakamoto, T. Sanada

    2019/11

  93. Numerical investigation of the variability of the droplet transfer cycles in a controlled short-circuit transfer process

    S. Eda, Y. Ogino, S. Asai

    2019/11

  94. Development of image sensing technology for in-process quality control

    K. Kasano, Y. Ogino, S. Asai

    2019/11

  95. In-process monitoring of weld quality in thin plate lap welding by using image sensing

    S. Nitta, Y. Ogino, S. Asai

    2019/11

  96. 溶接電流・ワイヤ送給制御された短絡移行型溶接プロセスの数値シミュレーション

    江田賢司, 荻野陽輔, 浅井知

    2019/11

  97. Development of a supporting system of pass design in multi-pass welding based on GMAW weld pool simulation

    Y. Ogino, T. Fujiwara, S. Asai, K. Tamura, S. Sakamoto

    2019/10

  98. Study on the on-line support system for welder

    S. Asai, Y. Ogino, K. Nomura, K. Hattori

    2019/10

  99. 画像センシングによる薄板重ねすみ肉溶接の溶接品質モニタリング

    新田誠也, 荻野陽輔, 浅井知

    2019/09

  100. ロボット溶接のための積層設計支援システムの開発

    大角敏裕, 荻野陽輔, 浅井知, 坂本眞一, 眞田拓郎

    2019/09

  101. ブローホール発生時の溶接現象の直接観察 インプロセス溶接品質管理技術の開発(第4報)

    笠野和輝, 浅井知, 荻野陽輔

    2019/09

  102. レーザ焼入れシミュレーションモデルの開発

    嵐亮介, 荻野陽輔, 浅井知, 水谷雅巳, 富山公博

    2019/09

  103. 炭酸ガスアーク溶接におけるアークプラズマ・溶滴挙動の3次元数値シミュレーション

    荻野陽輔, 浅井知, 平田好則

    2019/08

  104. 画像センシングによる薄板重ねすみ肉溶接の溶接品質モニタリング

    新田誠也, 荻野陽輔, 浅井知

    2019/08

  105. Numerical simulation of dynamic behavior in controlled short circuit transfer process

    S. Eda, Y. Ogino, S. Asai

    2019/07

  106. Visualization of arc plasma and molten wire behavior in CO2 arc welding process by numerical simulation

    Y. Ogino, S. Asai, Y. Hirata

    2019/07

  107. High productive Electroslag welding process for thick corner joint of built-up BOX column

    T. Tsuyama, S. Nambu, T. Tsuji, Y. Ogino, S. Asai

    2019/07

  108. 溶接熱源のモデル化とそれによる溶融池形成予測技術の開発

    浅井知, 荻野陽輔, 野村和史, 田中学, 茂田正哉, 松田朋己, 廣瀬明夫

    溶接学会全国大会概要第104集 2019/04

  109. 溶接構造物の疲労性能を最大化する溶接プロセス条件の探求

    堤成一郎, 清川裕樹, Fincato Riccardo, 荻野陽輔, 平田好則, 浅井知

    溶接学会全国大会概要第104集 2019/04

  110. 溶込み予測オンラインシステムの開発と統合シミュレーション

    荻野陽輔

    溶接学会全国大会概要第104集 2019/04

  111. 機械学習の活用による溶接プロセスシミュレーション高速化の試み

    荻野陽輔, 浅井知, 北野萌一, 中村照美

    溶接学会全国大会概要第104集 2019/04

  112. 溶接電流・ワイヤ送給制御する短絡移行プロセスにおける動特性数値シミュレーション

    江田賢司, 荻野陽輔, 浅井知

    溶接学会全国大会概要第104集 2019/04

  113. アーク溶接現象観察に適した光学フィルタ条件の基礎検証 インプロセスアーク溶接品質管理技術の開発(第3報)

    笠野和輝, 浅井知, 荻野陽輔

    溶接学会全国大会概要第104集 2019/04

  114. Visualization of non-axial symmetric arc plasma and molten electrode behavior in GMAW by numerical simulation

    Y. Ogino, S. Asai, Y. Hirata

    2019/03

  115. Numerical simulation of dynamic behavior in controlled short-circuit transfer process

    S. Eda, Y. Ogino, S. Asai

    2019/03

  116. Numerical Simulation of Heat Source Property in Arc Spot Welding Process

    S. Eda, Y. Ogino, S. Asai

    2018/11

  117. 箱型断面極厚角継手部の高能率施工法の開発 2電極エレクトロスラグ溶接法の適用

    津山忠久, 福本智, 荻野陽輔, 浅井知

    2018/11

  118. オンライン溶接画像センシング技術に関する基礎検証

    笠野和輝, 浅井知, 荻野陽輔

    2018/11

  119. アーク溶接現象のタイムスケールに関する考察 インプロセスアーク溶接品質管理技術の開発(第2報)

    笠野和輝, 浅井知, 荻野陽輔

    溶接学会全国大会概要第103集 2018/09

  120. アークスポット溶接における熱源特性の数値シミュレーション

    江田賢司, 荻野陽輔, 浅井知

    溶接学会全国大会概要第103集 2018/09

  121. ガスメタルアーク溶接熱源の3Dシミュレーション

    荻野陽輔, 浅井知, 平田好則

    溶接学会全国大会概要第103集 2018/09

  122. 高能率エレクトロスラグ溶接施工法の開発(第1報) 箱型断面柱極厚角継手部への適用

    津山忠久, 福本智, 荻野陽輔, 浅井知

    溶接学会全国大会概要第103集 2018/09

  123. 高能率エレクトロスラグ溶接施工法の開発(第2報) 溶融金属ならびに溶融スラグ挙動の直接観察

    福本智, 荻野陽輔, 浅井知, 津山忠久

    溶接学会全国大会概要第103集 2018/09

  124. 重ね継手の疲労寿命に対する溶接条件の影響に関する数値解析的検討

    清川裕樹, 堤成一郎, フィンカトリカルド, 荻野陽輔, 平田好則, 浅井知

    溶接学会全国大会概要第103集 2018/09

  125. Numerical simulation of GMAW heat source and its application to the weld pool simulation

    Y. Ogino, Y. Hirata, S. Asai

    2018/08

  126. Direct observation and numerical simulation of the molten metal and molten slag behavior in electroslag welding process

    Y. Ogino, S. Fukumoto, S. Asai, T. Tsuyama

    2018/07

  127. Fundamental study on on-line image sensing technology of arc welding

    K. Kasano, S. Asai, Y. Ogino

    2018/07

  128. Numerical simulation of GMAW process from the heat source properties to the weld pool formation

    Y. Ogino, Y. Hirata, S. Asai

    2018/07

  129. Numerical study of influence of gap between plates on weld pool formation in arc spot welding process

    S. Eda, Y. Ogino, S. Asai, Y. Hirata

    Welding in the World 2018/06

  130. エレクトロスラグ溶接における溶融金属・スラグ挙動の直接観察とシミュレーション

    荻野陽輔, 福本智, 浅井知, 津山忠久

    2018/05

  131. アーク溶接の溶込み予測オンラインシステムの開発

    荻野陽輔, 浅井知, 平田好則

    2018/04

  132. オンラインアーク溶接画像センシング手法の基礎検討 インプロセスアーク溶接品質管理技術の開発(第1報)

    笠野和輝, 浅井知, 荻野陽輔

    2018/04

  133. 疲労き裂発生寿命に及ぼす付加溶接ビードとHAZ強度特性の影響

    堤成一郎, 北村拓也, フィンカトリカルド, 荻野陽輔, 平田好則, 浅井知

    2018/04

  134. Monitoring of the back bead quality in MAG welding using weld pool shape obtained by a visual sensor

    Y. Ogino, H. Takeuchi, H. Kono, S. Asai

    2018/03

  135. アーク溶接におけるプラズマ―溶滴輸送現象の連成シミュレーション

    荻野陽輔

    2018/01

  136. 視覚センサによる初層片面裏波溶接の裏波品質モニタリング

    竹内大貴, 河野秀規, 荻野陽輔, 浅井知

    溶接学会全国大会概要第101集 2017/12

  137. 視覚センサによる初層片面裏波溶接の裏波品質モニタリング

    竹内大貴, 河野秀規, 荻野陽輔, 浅井知

    2017/12

  138. 付加溶接による疲労寿命延伸効果に関する数値解析的検討

    堤成一郎, 北村拓也, フィンカトリカルド, 荻野陽輔, 平田好則, 浅井知

    2017/12

  139. Numerical simulation of arc plasma and molten metal behavior in gas metal arc welding process

    Y. Ogino, Y. Hirata, S. Asai

    2017/11

  140. GMA溶接の熱源モデルと溶融池モデルのカップリングシミュレーション

    荻野陽輔, 浅井知, 平田好則

    溶接学会全国大会概要第101集 2017/09

  141. 付加溶接ビード形状とHAZ強度特性が疲労き裂発生寿命に与える影響

    堤成一郎, 北村拓也, Fincato Riccardo, 荻野陽輔, 平田好則, 浅井知

    溶接学会全国大会概要第101集 2017/09

  142. 数値シミュレーションによる溶滴挙動が溶込み形成に及ぼす影響に関する一考察

    荻野陽輔, 浅井知, 平田好則

    溶接学会全国大会概要第101集 2017/09

  143. 数値シミュレーションによるGMA溶接の溶滴移行形態変化に関する考察

    荻野陽輔, 平田好則, 浅井知

    2017/08

  144. Numerical simulation of WAAM process by a GMAW weld pool model

    Y. Ogino, S. Asai, Y. Hirata

    2017/06

  145. Numerical simulation describing influence of the shielding gas on the metal transfer phenomena in GMAW

    Y. Ogino, Y. Hirata, S. Asai

    2017/06

  146. Numerical simulation of weld pool formation in arc spot welding process

    S. Eda, Y. Ogino, S. Asai, Y. Hirata

    2017/06

  147. Visualization of the metal transfer and the arc plasma behavior in GMAW by numerical simulation

    Y. Ogino, Y. Hirata, S. Asai

    2017/06

  148. アークスポット溶接プロセスの数値解析

    江田賢司, 荻野陽輔, 浅井知

    2017/05

  149. アークスポット溶接プロセスの数値解析

    江田賢司, 荻野陽輔, 浅井知

    溶接学会全国大会概要第101集 2017/05

  150. 溶融池モデルによる金属積層造形シミュレーション

    荻野陽輔, 浅井知, 平田好則

    溶接学会全国大会概要 2017/04

  151. 溶融池形成シミュレーションにより得られる溶接ビード形状とHAZ強度特性を反映した疲労き裂発生寿命予測

    堤成一郎, 北村拓也, フィンカトリカルド, 荻野陽輔, 平田好則, 浅井知

    溶接学会全国大会概要 2017/04

  152. 溶滴物性値が溶融池形成に及ぼす影響に関する数値シミュレーション

    飯田将裕, 荻野陽輔, 浅井知, 平田好則

    溶接学会全国大会概要 2017/04

  153. アーク溶接プロセスの溶込みシミュレーション技術の開発と疲労寿命評価への活用

    荻野陽輔, 浅井知, 平田好則, 堤成一郎

    MIシンポジウム予稿集 2016/11

  154. Numerical simulation of GMA short-circuiting transfer process by control of welding current and wire feeding

    N. Nitta, S. Kihana, Y. Ogino, Y. Hirata

    2016/10

  155. Measurement of surface tension supporting pendant drop of molten metal formed by arc discharge

    M. Iida, Y. Hirata, K. Nomura, Y. Ogino, S. Asai, S. Izutani, K. Hosoi

    Visual-JW 2016 2016/10

  156. Development on numerical simulation model of weld pool in gas metal arc welding for engineering tool

    K. Tamura, Y. Ogino, Y. Hirata, S. Asai

    2016/10

  157. Development of numerical simulation model of weld pool phenomena in flux cored arc welding

    Y. Ogino, Y. Hirata, S. Asai

    2016/10

  158. Numerical simulation of metal transfer phenomena depending on the material properties of wire electrode

    Y. Ogino, Y. Hirata, S. Asai

    2016/10

  159. パルスミグアーク溶接の統合数値シミュレーション

    荻野陽輔, 平田好則, 浅井知

    溶接学会全国大会概要 2016/09

  160. 溶融池形成シミュレーションにより得られる溶接ビード形状を反映した疲労き裂発生寿命予測

    堤成一郎, 北村拓也, フィンカトリカルド, 荻野陽輔, 平田好則, 浅井知

    溶接学会全国大会概要 2016/09

  161. FCA溶接における溶融池現象のモデル化

    荻野陽輔, 平田好則, 浅井知

    溶接学会全国大会概要 2016/04

  162. GMAW溶融池の汎用シミュレーションモデルに関する研究

    田村光亮, 荻野陽輔, 平田好則, 浅井知

    溶接学会全国大会概要 2016/04

  163. アーク放電により形成された金属液滴の表面張力の測定

    飯田将裕, 平田好則, 野村和史, 荻野陽輔, 浅井知, 泉谷瞬, 細井宏一

    溶接学会全国大会概要 2016/04

  164. 溶接電流・ワイヤ送給速度制御によるGMA短絡移行プロセスのシミュレーション

    新田夏規, 木花翔吾, 荻野陽輔, 平田好則

    溶接学会全国大会概要 2016/01

  165. 溶接電流・ワイヤ送給速度制御によるGMA短絡移行プロセスのシミュレーション

    新田夏規, 木花翔吾, 荻野陽輔, 平田好則

    2016/01

  166. 数値シミュレーションによるアーク溶接の溶込み形状予測技術の開発

    荻野陽輔, 平田好則, 浅井知

    溶接学会全国大会概要 2015/09

  167. A unified numerical model of MIG welding process

    Y. Ogino, Y. Hirata

    2015/09

  168. ガスメタルアーク溶接における溶滴移行現象の数値シミュレーション-シールドガスの影響-

    荻野陽輔, 平田好則

    溶接法研究委員会資料 2015/08

  169. In-situ temperature determination of MAG welding and its application for heat input control

    S-F. Goecke, Y. Ogino, Y. Hirata

    2015/07

  170. Numerical simulation of GMAW process using Ar and Ar-CO2 mixed gas

    Y. Ogino, Y. Hirata

    2015/07

  171. アーク溶接の熱源モデル

    荻野陽輔, 平田好則

    溶接学会全国大会概要 2015/04

  172. 継手形状・溶接姿勢を考慮した3次元溶融池モデル

    荻野陽輔, 平田好則

    溶接学会全国大会概要 2015/04

  173. Numerical simulation of GMA free flight transfer process

    N. Nitta, Y. Ogino, Y. Hirata

    2014/11

  174. 3D numerical model of weld pool with free surface

    Y. Takabe, Y. Ogino, Y. Hirata

    2014/11

  175. 表面変形を考慮した3次元溶融池モデル 第3報

    髙部義浩, 荻野陽輔, 平田好則

    溶接学会全国大会概要 2014/09

  176. GMA自由移行プロセスのシミュレーション

    新田夏規, 荻野陽輔, 平田好則

    溶接学会全国大会概要 2014/09

  177. アークプラズマを考慮したGMA溶滴移行現象のシミュレーション

    荻野陽輔, 平田好則

    溶接学会全国大会概要 2014/09

  178. アークプラズマを考慮したGMA溶滴移行現象のシミュレーション

    荻野陽輔, 平田好則

    溶接法研究委員会資料 2014/08

  179. GMA短絡移行プロセスの三次元数値シミュレーション

    橋本浩平, 平田好則, 荻野陽輔

    溶接学会全国大会講演概要 2014/04

  180. 溶融池表面の形状変化を考慮した3次元ティグ溶接モデル

    荻野陽輔, 平田好則

    溶接学会全国大会講演概要 2014/04

  181. Numelical analysis of TIG arc welding with filler wire feeding by simple model

    K. Kotaro, K. Nomura, Y. Ogino, Y. Hirata

    Preprints of the National Meeting of JWS 2013/09

  182. Numerical analysis of rotating transfer by a 3D electromagnetic liquid transfer model

    Y. Ogino, Y. Hirata, S. Kihana, N. Nitta

    2013/09

  183. 溶滴移行現象の三次元モデル解析

    木花翔吾, 橋本浩平, 荻野陽輔, 平田好則

    溶接学会全国大会講演概要 2013/09

  184. ティグアークモデルにおける陰極の取扱いに関する一考察

    荻野陽輔, 髙部義浩, 平田好則

    溶接学会全国大会講演概要 2013/09

  185. 3次元溶滴移行モデルによる自由移行現象解析

    荻野陽輔, 平田好則, 木花翔吾, 新田夏規

    溶接法研究委員会資料 2013/08

  186. 表面形状の変化を考慮した3次元溶融池モデル

    荻野陽輔, 髙部義浩, 平田好則

    溶接学会全国大会講演概要 2013/04

  187. 2電極TIGアークの温度計測に関する研究

    野村和史, 白井健太郎, 貴志崇, 荻野陽輔, 平田好則

    溶接法委員会資料 2012/11

  188. Research on weld pool formation by two-electrode TIG arc 2nd report

    Y. Ogino, J. Kawata, K. Nomura, Y. Hirata

    Preprints of the National Meeting of JWS 2012/09

  189. 2電極ティグ溶接におけるアークプラズマ-溶融池の数値解析

    荻野陽輔, 河田純一, 平田好則, 野村和史

    溶接法委員会資料 2012/08

  190. Research on weld pool formation by two-electrode TIG arc

    Y. Ogino, J, Kawata, K. Nomura, Y. Hirata

    Preprints of the National Meeting of JWS 2012/04

  191. Research on weld pool formation by magnetic controlled arc

    Y. Ogino, J. Kawata, K. Nomura, Y. Hirata

    Preprints of the National Meeting of JWS 2011/09

  192. Development on Magnetic Control of Arc Plasma in Gas Shielded Arc Welding, 5th report

    Y. Ogino, T. Haga, K. Nomura, Y. Hirata

    Preprints of the National Meeting of JWS 2011/04

  193. Influence of Magnet Configurations on Magnetic Controlled TIG Arc Welding

    K. Nomura, Y. Ogino, T. Haga, Y. Hirata

    Visual-JW2010 2010/11

  194. Numerical Analysis on the Heat Source Characteristics of the Two-Electrodes TIG Arc

    Y. Ogino, Y. Hirata, K. Nomura

    Visual-JW2010 2010/11

  195. 3D Numerical Model of Molten Metal Flow in Weld Pool

    Y. Ogino, K. Nomura, T, Hirano, Y. Hirata

    Preprints of the National Meeting of JWS 2010/09

  196. Numerical Analysis on the Heat Source Characteristics of the Two-Electrodes TIG Arc

    Y. Ogino, Y. Hirata, K. Nomura

    IIW Doc. 2010/07

  197. Influence of Magnet Configurations on Magnetic Controlled TIG Arc Welding

    K. Nomura, Y. Ogino, T. Haga, K. Murakami, T. Hirano, Y. Hirata

    IIW Doc. 2010/07

  198. Development on Magnetic Control of Arc Plasma in Gas Shielded Arc Welding, 4th report

    K. Nomura, K. Murakami, Y. Ogino, T. Hirano, Y. Hirata

    Preprints of the National Meeting of JWS 2010/04

  199. https://www.jstage.jst.go.jp/article/jwstaikai/2010s/0/2010s_0_55/_pdf

    Y. Ogino, K. Nomura, Y. Hirata

    Preprints of the National Meeting of JWS 2010/04

  200. 3次元アークモデルの開先部への適用

    荻野陽輔, 野村和史, 平田好則

    溶接学会全国大会講演概要 2009/04

  201. Magnetic control of TIG arc plasma

    Yoshinori Hirata, Kazufumi Nomura, Kazuyuki Morisaki

    ASM Proceedings of the International Conference: Trends in Welding Research 2009

  202. Development of arc shape control method by cusp type magnetic field in gas shielded arc welding process

    K.Nomura, K.Morisaki, Y.Ogino, Y.Hirata

    2008/11

  203. Development on Magnetic Control of Arc Plasma in Gas Shielded Arc Welding, 3rd report

    K. Nomura, K. Morisaki, Y. Ogino, Y. Hirata

    Preprints of the National Meeting of JWS 2008/09

Social Activities 7

  • アーク溶接プロセスシミュレーションの現状とこれから

    京都先端技術研究会 接合・溶接セミナー ~マテリアル接合DAY2025~

    2025/01/31 - 2025/01/31

  • 溶融池と温度分布

    第10 回溶接連合講演会

    2024/04/24 - 2024/04/24

  • アーク溶接現象のシミュレーション

    溶接学会溶接法研究委員会 新溶接アーク現象セミナー

    2022/11/28 - 2022/11/28

  • シミュレーション技術とモニタリング技術の融合による品質保証型溶接システムの開発

    公益財団法人溶接接合工学振興会 公益財団法人溶接接合工学振興会第31回セミナー

    2022/10/31 - 2022/10/31

  • 第29回溶接学会四国支部「溶接技術実用講座」

    溶接学会四国支部

    2020/11 -

  • 大阪大学接合科学研究所「東京セミナー」 計算科学が拓く溶接研究の新展開

    大阪大学接合科学研究所

    2019/11 -

  • 平成29年度溶接工学専門講座 ものづくり力伝承講座~溶接プロセスの可視化を極める~

    溶接学会

    2017/11 -

Media Coverage 2

  1. プレスリリース:ものづくりを支える“アーク溶接プロセスの溶融ワイヤ内部加速挙動の直接計測に世界で初めて成功 ― 次世代接合・ 3Dプリンティングプロセスへとつなぐ現象可視化

    2025/08/20

  2. 現場溶接ロボをホテル建設に適用 清水建設

    溶接ニュース

    2018/06

Academic Activities 17

  1. International Institute of Welding (IIW), Commission-XIX Vice-Chair

    2025/06 - Present

  2. 日本溶接協会 AM部会技術委員会 幹事

    2024/04/01 - Present

  3. スマートプロセス学会 学術企画運営委員会 委員

    一般社団法人スマートプロセス学会

    2022/05 - Present

  4. スマートプロセス学会 総合企画運営委員会 委員

    一般社団法人スマートプロセス学会

    2022/05 - Present

  5. 溶接学会 溶接法研究委員会 若手・中堅WG 主査

    一般社団法人溶接学会 溶接法研究委員会

    2022/05 - Present

  6. 溶接学会編集委員会 総合企画グループ

    一般社団法人溶接学会

    2022/04/01 - Present

  7. 溶接学会 溶接法研究委員会 幹事

    一般社団法人溶接学会 溶接法研究委員会

    2021/11 - Present

  8. 日本溶接協会 3D積層造形技術委員会 幹事

    一般社団法人日本溶接協会

    2022/05 - 2024/03

  9. 溶接学会若手会員の会 運営委員会 IIW2022東京大会 YPイベント担当委員

    一般社団法人溶接学会

    2022/04 - 2022/09

  10. 溶接学会若手会員の会 運営委員会 グローバルネットワーク担当幹事

    一般社団法人溶接学会

    2020/04 - 2022/03

  11. 溶接学会編集委員会 プロセスグループ

    一般社団法人溶接学会

    2017/10 - 2022/03

  12. 溶接学会溶接教育委員会 委員

    一般社団法人溶接学会

    2018/04 - 2020/03

  13. 溶接学会溶接情報化委員会 委員

    一般社団法人溶接学会

    2018/04 - 2020/03

  14. 溶接学会研究推進部会 委員

    一般社団法人溶接学会

    2018/04 - 2020/03

  15. 溶接学会企画委員会 委員

    一般社団法人溶接学会

    2018/04 - 2020/03

  16. 溶接学会若手会員の会 運営委員会 委員長

    一般社団法人溶接学会

    2018/04 - 2020/03

  17. 溶接学会若手会員の会 運営委員会 会計担当幹事

    一般社団法人溶接学会

    2016/04 - 2018/03

Institutional Repository 6

Content Published in the University of Osaka Institutional Repository (OUKA)
  1. In-situ X-ray imaging of the breakup dynamics of current-carrying molten metal jets during arc discharge

    Sato Yuriko, Shobu Takahisa, Tominaga Aki, Sano Tomokazu, Ogino Yosuke

    Communications Materials Vol. 5 2024/08/20

  2. Visualization and control of the free-flight transfer phenomenon in the wire feed control process

    Maruyama Toshiki, Ogino Yosuke, Sano Tomokazu

    Welding in the World Vol. 68 No. 9 p. 2271-2279 2024/03/13

  3. Process parameters and their effect on metal transfer in gas metal arc welding: a driving force perspective

    Sato Yuriko, Ogino Yosuke, Sano Tomokazu

    Welding in the World Vol. 68 p. 905-913 2024/01/15

  4. Numerical analysis on heat source characteristics of two-electrodes TIG arc

    Ogino Yosuke, Hirata Yoshinori, Nomura Kazufumi

    Transactions of JWRI Vol. 39 No. 2 p. 204-206 2010/12

  5. Influence of magnet configurations on magnetic controlled TIG arc welding

    Nomura Kazufumi, Ogino Yosuke, Haga Takuya, Hirata Yoshinori

    Transactions of JWRI Vol. 39 No. 2 p. 209-210 2010/12

  6. アークプラズマと溶融池の相互作用を考慮した三次元ティグ溶接モデルの開発

    荻野 陽輔