JA

Profile

Research

Social

Other

Komizo Yu-ichi

小溝 裕一

Specially Appointed Professor

Research History

  • 2017/04 - Present, Osaka University, Global Initiative Center, Regional Director
  • 2015/04 - 2020/03, Japan Synchrotron Radiation Research Institute, Eminent Scientist
  • 2004 - , - 大阪大学接合科学研究所 教授
  • 2004 - , - Professor, Joining & Welding Research Institute, Osaka University

Research Areas

  • Nanotechnology/Materials, Material fabrication and microstructure control
  • Nanotechnology/Materials, Structural and functional materials

Professional Memberships

  • 溶接学会
  • 日本鉄鋼協会
  • 日本チタン協会
  • 熱処理技術協会

Papers

  • Achieving ultrafine-grained ferrite structure in friction stir processed weld metal, P. Xue,Z. Y. Ma,Y. Komizo,H. Fujii, Materials Letters, Elsevier, Vol. 162, p. 161-164, 2016/01/01
  • Investigation of Fracture Location of T22/T91 Dissimilar Welds, Salita Petchsang,Isaratat Phung-On,Hidenori Terasaki,Yu Ichi Komizo,Hajime Yamamoto, Key Engineering Materials, Trans Tech Publications, Ltd., Vol. 659, p. 355-360, 2015/08
  • Effect of Close-Packed Plane Boundaries in a Bain Zone on the Crack Path in Simulated Coarse-Grained HAZ of Bainitic Steel, Hidenori Terasaki,Yutaro Shintome,Yu-ichi Komizo,Mitsuru Ohata,Koji Moriguchi,Yusaku Tomio, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Springer Boston, Vol. 46, No. 5, p. 2035-2039, 2015
  • In-situ characterization of martensitic transformation in high carbon steel under continuous-cooling condition, H. Terasaki,Y. Shintome,A. Takada,Y. Komizo,S. Morito, Materials Today: Proceedings, Elsevier Ltd, Vol. 2, No. 3, p. S941-S944, 2015
  • Effects of holding temperature on bainite transformation in Cr-Mo steel, M. Sarizam,Y. Komizo, Journal of Mechanical Engineering and Sciences, Universiti Malaysia Pahang, Vol. 7, No. 1, p. 1103-1114, 2014/12/01
  • Hydrogen distribution and hydrogen cracking susceptibility of a martensitic-austenitic steel welding wire, Girish Kumar Padhy,Hidenori Terasaki,Yu-ichi Komizo, MATERIALS LETTERS, ELSEVIER SCIENCE BV, Vol. 136, p. 22-25, 2014/12
  • Development of Evaluation Technique of GMAW Welding Quality Based on Statistical Analysis, Feng Shengqiang,Terasaki Hidenri,Komizo Yuichi,Hu Shengsun,Chen Donggao,Ma Zhihua, CHINESE JOURNAL OF MECHANICAL ENGINEERING, SPRINGER, Vol. 27, No. 6, p. 1257-1263, 2014/11
  • Visualization and Analysis of Variant Grouping in Continuously Cooled Low-Carbon Steel Welds, Hidenori Terasaki,Yutaro Shintome,Atsushi Takada,Yu-Ichi Komizo,Koji Moriguchi,Yusaku Tomio, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, SPRINGER, Vol. 45A, No. 8, p. 3554-3559, 2014/07
  • Enhanced mechanical properties in friction stir welded low alloy steel joints via structure refining, P. Xue,Y. Komizo,R. Ueji,H. Fujii, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, Vol. 606, p. 322-329, 2014/06
  • LSCM-EBSD analysis of local distribution of weld microstructure in low-carbon steel, H. Terasaki,Y. Komizo, Japan-Indonesia Welding Seminar 2014, p. 25-30, 2014/05
  • Status & Prospects of Advanced Structural Steel and Its Weldability, Y. Komizo, Proceedings of IMTCE2014, 9th International Materials Technology Conference & Exhibition, No. MWT-001-KS(USB), p. 1-8, 2014/05
  • Three-dimensional Approach to Observing Growth of Blocks and Packets in Fe-18Ni Maraging Steel, S. Morito,S. Yoshida,R. Hayamizu,T. Hayashi,T. Ohba,H. Terasaki,Y. Komizo, Materials Science Forum, Vol. 783-786, p. 916-919, 2014/05
  • In-situ observation for solidification and phase transformation during welding, Y. Komizo, Journal of the Japan Society for Heat Treatment, Vol. 54, No. 1, p. 12-21, 2014/02
  • Correlation Between the Microstructural Development of Bainitic Ferrite and the Characteristics of Martensite-Austenite Constituent, Hidenori Terasaki,Yu-ichi Komizo, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, SPRINGER, Vol. 44A, No. 12, p. 5289-5293, 2013/12
  • In-situ observations of phase transformations during C-Mn-Al steel weld solidification, X. F. Zhang,Y. Komizo,T. Yokota,K. Yasuda,K. Oi, MATERIALS SCIENCE AND TECHNOLOGY, TAYLOR & FRANCIS LTD, Vol. 29, No. 11, p. 1363-1372, 2013/11
  • Inclusion utilization technology for microstructure control in welding, Y. Komizo, Proceedings of 5th International Conference on Welding Science and Engineering (WSE2013), p. 123-126, 2013/10
  • Influence of austenite grain size on low temperature toughness of weld metal, P. Han,M. Sato,Y. Komizo,X. Zhang, 66th Annual Assembly of Int. Inst. Welding (IIW), 2013/09
  • Relation between M-A constituent and microstructure development in simulated HAZ of low-carbon steel, TERASAKI Hidenori,KOMIZO Yu-ichi, Preprints of the National Meeting of JWS, JAPAN WELDING SOCIETY, Vol. 93, p. 174-175, 2013/08/12
  • In Situ Investigation of the Allotropic Transformation in Iron, Xin-Fang Zhang,Yu-ichi Komizo, STEEL RESEARCH INTERNATIONAL, WILEY-V C H VERLAG GMBH, Vol. 84, No. 8, p. 751-760, 2013/08
  • 2012 JWS Activities, KOMIZO Yu-ichi, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, JAPAN WELDING SOCIETY, Vol. 82, No. 5, p. 364-364, 2013/07/05
  • Morphology and Crystallography of Bainitic Ferrite and M-A Constituent in Simulated CGHAZ of a Low Carbon Steel, H. Terasaki,Y. Komizo, 7th Asia Pacific IIW International Congress 2013, 2013/07
  • Welding Metallurgy I-2, Y.Komizo, Textbook for summer school of welding engineering, p. 103-120, 2013/07
  • In situ investigation of delta-gamma transformation during weld solidification in steels, Y. Komizo,X.F. Zhang, 7th Asia Pacific IIW International Congress 2013, 2013/07
  • Diffusible Hydrogen in Steel Weldments- A Status Review, PADHY Girish Kumar,KOMIZO Yuichi, Trans. JWRI, Vol. 42, No. 1, p. 39-62, 2013/06
  • Morphology and Crystallography of Bainite Transformation in a Single Prior-Austenite Grain of Low-Carbon Steel, Hidenori Terasaki,Yu-ichi Komizo, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, SPRINGER, Vol. 44A, No. 6, p. 2683-2689, 2013/06
  • 鉄鋼マルテンサイト変態に関する過剰剛性率に関する研究, 寺崎 秀紀,森口 晃治,山岸 英樹,小溝 裕一,富尾 悠索, スマートプロセス学会誌, Vol. 2, No. 3, p. 128-133, 2013/05
  • 低炭素再現CGHAZ部におけるブロックの結晶学的特徴とM-A組織形成との相関に関して, 寺崎 秀紀,小溝 裕一, 第211回溶接冶金研究委員会, Vol. 2, No. 3, p. 128-133, 2013/05
  • Visual analysis of solidification and delta-gamma transformations in steels, X. F. Zhang,Y. Komizo, MATERIALS SCIENCE AND TECHNOLOGY, MANEY PUBLISHING, Vol. 29, No. 5, p. 631-635, 2013/05
  • Correlation of precipitate stability to increased creep resistance of Cr-Mo steel welds, X. Yu,S. S. Babu,H. Terasaki,Y. Komizo,Y. Yamamoto,M. L. Santella, Acta Materialia, Vol. 61, No. 6, p. 2194-2206, 2013/04
  • Investigation for Microstructure of Reheated Weld Metals, KATSUKI Sho,TAKADA Atsushi,TERASAKI Hidenori,KOMIZO Yu-ichi,TANABE Hirohisa,NISHIBATA Toshinobu,OGAWA Kazuhiro, Preprints of the National Meeting of JWS, JAPAN WELDING SOCIETY, Vol. 92, p. 192-193, 2013/03/21
  • Effect of aluminium content on acicular ferrite formation in low carbon steel weld metals, A. Takada,H. Terasaki,Y. Komizo, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, MANEY PUBLISHING, Vol. 18, No. 2, p. 91-97, 2013/02
  • 溶接部の凝固・相変態のその場観察技術(後編), 小溝 裕一, 検査技術, Vol. 18, No. 2, p. 7-15, 2013/02
  • Microstructure and mechanical properties of friction stir welded X80 pipeline steel joint under additional cooling, P. Xue,H. Zhao,Y. Komizo,Z. Y. Ma, PROCEEDINGS OF THE 1ST INTERNATIONAL JOINT SYMPOSIUM ON JOINING AND WELDING, WOODHEAD PUBL LTD, p. 445-+, 2013
  • The effects of ausforming on variant selection of martensite in Cr-Mo steel, Tomoharu Shigeta,Atsushi Takada,Hidenori Terasaki,Yu-Ich Komizo, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 31, No. 4, p. 178s-182s, 2013
  • Crystallographic Analysis for Acicular Ferrite Formation in Low Carbon Steel Weld Metals, TAKADA Atsushi,KOMIZO Yu-ichi,TERASAKI Hidenori,YOKOTA Tomoyuki,OI Kenji,YASUDA Koichi, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, JAPAN WELDING SOCIETY, Vol. 31, No. 1, p. 33-40, 2013
  • 溶接部の凝固・相変態のその場観察技術(前編), 小溝 裕一, 検査技術, Vol. 18, No. 1, p. 16-24, 2013/01
  • Direct observation of thermal stability of M23C6 carbides during reheating using in situ synchrotron X-ray diffraction, X. F. Zhang,Y. Komizo, PHILOSOPHICAL MAGAZINE LETTERS, TAYLOR & FRANCIS LTD, Vol. 93, No. 1, p. 9-17, 2013/01
  • Direct observation of SR crack initiation by Laser Scanning Confocal Microscopy, Yu-ichi Komizo,Hidenori Terasaki,Kenji Kubo,Mikihiro Sakata,Ken Yamashita, TRENDS IN WELDING RESEARCH: PROCEEDINGS OF THE 9TH INTERNATIONAL CONFERENCE, ASM INTERNATIONAL, p. 611-+, 2013
  • Crystallographic analysis for acicular ferrite formation in low carbon steel weld metals, Atsushi Takada,Yu-Ichi Komizo,Hidenori Terasaki,Tomoyuki Yokota,Kenji Oi,Koichi Yasuda, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 31, No. 1, p. 33-40, 2013
  • Hybrid system for in-situ observation of microstructure evolution in steel materials, KOMIZO Yuichi,TERASAKI Hidenori,ZHANG Xinfang, Trans. JWRI, Vol. 41, No. 2, p. 39-45, 2012/12
  • Time-resolved in-situ analysis of delta-ferrite precipitation with austenite grain growth during intercritical annealing, X.F. Zhang,H. Terasaki,Y. Komizo,T. Yokota,K. Yasuda, Proceedings of the 3rd International Symposium on Steel Science (ISSS2012), p. 215-218, 2012/12
  • Direct Observation that Bainite can Grow Below M-S, Peter Kolmskog,Annika Borgenstam,Mats Hillert,Peter Hedstrom,Sudarsanam Suresh Babu,Hidenori Terasaki,Yu-Ichi Komizo, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, SPRINGER, Vol. 43A, No. 13, p. 4984-4988, 2012/12
  • In Situ Observation of High Temperature Creep Behavior During Annealing of Steel, X. F. Zhang,H. Terasaki,Y. Komizo,Y. Murakami,K. Yasuda, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, SPRINGER, Vol. 43A, No. 13, p. 5067-5078, 2012/12
  • Welding Metallurgy I-2, Y.Komizo, Textbook for summer school of welding engineering, p. 111-132, 2012/07
  • In situ investigation of structure and stability of niobium carbonitrides in an austenitic heat-resistant steel, X. F. Zhang,H. Terasaki,Y. Komizo, SCRIPTA MATERIALIA, PERGAMON-ELSEVIER SCIENCE LTD, Vol. 67, No. 2, p. 201-204, 2012/07
  • Effect of cooling rate on phase transformation in the low-carbon boron-treated steel, Di Zhang,Yoshiaki Shintaku,Shuichi Suzuki,Yu-ichi Komizo, JOURNAL OF MATERIALS SCIENCE, SPRINGER, Vol. 47, No. 14, p. 5524-5528, 2012/07
  • Correlation between the thermodynamic stability of austenite and the shear modulus of polycrystalline steel alloy, H. Terasaki,H. Yamagishi,K. Moriguchi,Y. Tomio,Y. Komizo, JOURNAL OF APPLIED PHYSICS, AMER INST PHYSICS, Vol. 111, No. 9, 2012/05
  • Time-resolved X-ray diffraction studies of phase evolution including liquid phase and grain structure during solidification process in stainless steel welds, Hidenori Terasaki,Yu-ichi Komizo, MATERIALS LETTERS, ELSEVIER SCIENCE BV, Vol. 74, p. 187-190, 2012/05
  • In-Situ Observations of Martensitic Transformation in Blast-Resistant Steel, Xinghua Yu,Sudarsanam Suresh Babu,John C. Lippold,Hidenori Terasaki,Yu-ichi Komizo, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, SPRINGER, Vol. 43A, No. 5, p. 1538-1546, 2012/05
  • Analytical Investigation of Prior Austenite Grain Size Dependence of Low Temperature Toughness in Steel Weld Metal, X. F. Zhang,P. Han,H. Terasaki,M. Sato,Y. Komizo, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, JOURNAL MATER SCI TECHNOL, Vol. 28, No. 3, p. 241-248, 2012/03
  • In Situ Observation of Phase Transformation in Low-Carbon, Boron-Treated Steels, Di Zhang,Yoshiaki Shintaku,Shuichi Suzuki,Yu-Ichi Komizo, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, SPRINGER, Vol. 43A, No. 2, p. 447-458, 2012/02
  • Study on standardization of laser welding technologies:(11)Understanding the phenomena in molten pool for optimization of laser irradiation condition, Yamada Tomonori,Shobu Takahisa,Yada Hiroki,Muramatsu Toshiharu,Komizo Yu-ichi, Proceedings of Annual / Fall Meetings of Atomic Energy Society of Japan, Atomic Energy Society of Japan, Vol. 2012, No. 0, p. 292-292, 2012
  • Decrease of solidification cracking susceptibility on fully austenitic weld metal with a large amount of Phosphorus using application of Rare Earth Monophosphide:- Development of method to prevent solidification crack in austenitic weld metal with a large amount of Phosphorus -, OSUKI Takahiro,TERASAKI Hidenori,KOMIZO Yu-ichi,HIRATA Hiroyuki,OGAWA Kazuhiro, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, JAPAN WELDING SOCIETY, Vol. 30, No. 2, p. 196-205, 2012
  • Variant Selection of Low Carbon High Alloy Steel in an Austenite Grain during Martensite Transformation, Shuoyuan Zhang,Shigekazu Morito,Yu-ichi Komizo, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 52, No. 3, p. 510-515, 2012
  • 計測技術に見る溶接中組織変化のその場観察, 小溝 裕一, 配管技術, 日本工業出版, Vol. 54, No. 1, p. 42-48, 2012/01
  • In-situ Observation for Solidification and Phase Transformation During Welding, KOMIZO Yu-ichi, Vol. 80, No. 8, p. 671-682, 2011/12/05
  • In-situ Observation Techniques of Solidification and Phase Transformation during Welding, KOMIZO Yuichi, Trans. JWRI, Vol. 40, No. 2, p. 7-20, 2011/12
  • Qualitative and Quantitative Analysis of GMAW Welding Fault Based on Mahalanobis Distance, Feng Shengqiang,Otsuka Hiroyuki,Terasaki Hidennori,Komizo Yuichi,Hu Shengsun, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, KOREAN SOC PRECISION ENG, Vol. 12, No. 6, p. 949-955, 2011/12
  • 溶接金属の低温靱性に及ぼすγ粒径の影響, 小溝 裕一,張 新房,韓 鵬,佐藤 統宣, 溶接構造シンポジウム2011 講演論文集, p. 123-126, 2011/11
  • Study for microstructure control in weld, Y.Komizo, Titanium Japan, Vol. 59, No. 4, p. 290-295, 2011/10
  • Welding Metallurgy I-2 Metallurgy for welding of steel materials, Y.Komizo, Textbook for summer school of welding engineering, p. 109-128, 2011/07
  • In-situ observation of martensite transformation and variant analysis in low carbon steel, Y.Komizo,S.Zhang,S.Morito, Journal of the Japan Society for Heat Treatment, 2011/06
  • Analysis for acicular ferrite in low carbon steel weld metal, TAKADA Atsushi,TERASAKI Hidenori,KOMIZO Yu-ichi, Vol. 37, No. 3, p. 11-12, 2011/05/20
  • Experimental Examination for Decreasing the Oxide Inclusions in Gas Pressure Welding of Rails, YAMAMOTO Ryu-ichi,TATSUMI Mitsumasa,ITO Hajime,KOMIZO Yu-ichi, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, JAPAN WELDING SOCIETY, Vol. 29, No. 4, p. 258-266, 2011
  • Experimental Determination of Elastic Modulus during Martensitic Transformation of Low Transformation Temperature Steel, Hidenori Terasaki,Hideki Yamagishi,Koji Moriguchi,Yusaku Tomio,Yu-ichi Komizo, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 51, No. 9, p. 1566-1568, 2011
  • In-situ observation of phase transformation during rapid cooling processes, Tomonori Yamada,Yukihiro Yonemoto,Susumu Yamashita,Toshiharu Muramatsu,Yu Ichi Komizo, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 29, No. 3, p. 86s-89s, 2011
  • Transient Flow and Inclusion Removal in Gas Stirred Ladle during Teeming Process, T. Qu,M. Jiang,C. Liu,Y. Komizo, STEEL RESEARCH INTERNATIONAL, WILEY-BLACKWELL PUBLISHING, INC, Vol. 81, No. 6, p. 434-445, 2010/06
  • In Situ Synchrotron Study of Inclusions in the Weld Pool for the Assessment of Nucleation Potency of Acicular Ferrite, Hidenori Terasaki,Yu-ichi Komizo, IN-SITU STUDIES WITH PHOTONS, NEUTRONS AND ELECTRONS SCATTERING, SPRINGER-VERLAG BERLIN, p. 85-94, 2010
  • Direct Analysis of Solidification-Mode During Welding for the Assessment of Hot-Cracking, Hidenori Terasaki,Yu-ichi Komizo, IN-SITU STUDIES WITH PHOTONS, NEUTRONS AND ELECTRONS SCATTERING, SPRINGER-VERLAG BERLIN, p. 77-83, 2010
  • 「溶接・接合技術のロードマップ」中間報告, 平田 好則,小溝 裕一, 溶接学会誌, JAPAN WELDING SOCIETY, Vol. 78, No. 5, p. 483-493, 2009
  • EDS Analysis of Inclusions Related to Acicular Ferrite Formation in Steel Weld Metal:-Microscopic Observation of Inclusions Related to Acicular Ferrite Formation in Steel Weld Metal (Report2)-, YAMADA TOMONORI,TERASAKI HIDENORI,KOMIZO YU-ICHI, Preprints of the National Meeting of JWS, JAPAN WELDING SOCIETY, Vol. 2008, No. 0, p. 51-51, 2008
  • The Lattice Misfit between Inclusion and Acicular Ferrite:-Microscopic Observation of Inclusions Related to Acicular Ferrite Formation in Steel Weld Metal (Report3)-, YAMADA TOMONORI,TERASAKI HIDENORI,KOMIZO YU-ICHI, Preprints of the National Meeting of JWS, JAPAN WELDING SOCIETY, Vol. 2008, No. 0, p. 230-230, 2008
  • Evaluation of solidification cracking susceptibility in alloy tool steel considering dependence of primary phase selection, Tadafumi Hashimoto,Hidenori Terasaki,Yu-ichi Komizo, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 94, No. 9, p. B27-B32, 2008
  • Effect of Chemical Bonding in Hydroxyapatite Film formation on Titanium by Aerosol Beam Irradiation, Hidenori Terasaki,Yuichi Komizo,Nobuyuki Abe,Masahiro Tsukamoto,Masahiro Yoshimura,Tomoaki Watanabe,Nobuhiro Matsushita, 2007/11
  • Fabrication of Bioactive Ceramics Thin Film on Ti-based bulk alloys by using hydrothermal-electrochemical technique, Naota Sugiyama,Hai Yan Xu,Tomoaki Watanabe,Nobuhiro Matsushita,Takamasa Onoki,Yasuto Hoshikawa,Xinmin Wang,Akihisa Inoue,Masahiro Tsukamoto,Nobuyuki Abe,Yuichi Komizo,Masahiro Yoshimura, The 1st International Conference on Science and Technology for Advanced Ceramics(STAC) & The 2nd International Conference on Joining Technology for New Metallic Glasses and Inorganic Materials(JTMC), 2007/05
  • フェムト秒レーザ照射によるチタンの相転移, 飛鳥 慶太,塚本 雅裕,小溝 裕一,阿部 信行,中野 人志,甲藤 正人,橋田 昌樹,藤田 雅之, 第67回応用物理学会学術講演会講演予稿集, 2006/08
  • CaTiO3 Film Formation on Ti and Ti-Alloy by Electrochemical Process for Hydroxyapatite Deposition, Tomoaki WATANABE,Naota SUGIYAMA,Nobuhiro MATSUSHITA,Xinmin WANG,Akihisa INOUE,Masahiro TSUKAMOTO,Nobuyuki ABE,Yuichi KOMIZO,Takamasa ONOKI,Yasuhiri TANABE,Masahiro YOSHIMURA, The Second International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materals, and Joining Technology for New Metallic Glasses and Inorganic Materials, 2006/05
  • Microstructure observation of duplex stainless steel joined by friction stir welding, Yamada Tomonori,Komizo Yu-ichi,Hujii Hidetoshi, Preprints of the National Meeting of JWS, JAPAN WELDING SOCIETY, Vol. 2006, No. 0, p. 27-27, 2006
  • Inclusion utilization technology in welding, Y Komizo,T Nishizawa, PROCEEDINGS OF THE FIFTEENTH (2005) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL 4, INTERNATIONAL SOCIETY OFFSHORE& POLAR ENGINEERS, p. 102-105, 2005
  • Metallurgical design of ultra-high strength steels for gas pipelines, JY Koo,MJ Luton,NV Bangaru,RA Petkovic,DP Fairchild,CW Petersen,H Asahi,T Hara,Y Terada,M Sugiyama,H Tamehiro,Y Komizo,S Okaguchi,M Hamada,A Yamamoto,L Takeuchi, PROCEEDINGS OF THE THIRTEENTH (2003) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL 4, INTERNATIONAL SOCIETY OFFSHORE& POLAR ENGINEERS, p. 10-18, 2003
  • Effect of Ni content on weld hot cracking susceptibility of fully austenitic Fe‐Cr‐Ni alloy ‐ Investigation on weld hot cracking susceptibility of fully austenitic Fe‐Cr‐Ni alloy (report 1), T. Nishibata,H. Hirata,K. Ogawa,Y. Komizo, Welding International, Vol. 15, No. 10, p. 789-797, 2001
  • Microstructural features and corrosion properties in laser welded duplex stainless steels, T. Omura,T. Kushida,Y. Komizo, Welding International, Vol. 14, No. 4, p. 257-260, 2000
  • Nitrogen distribution on rapid solidification in laser welded duplex stainless steels, T. Omura,T. Kushida,Y. Komizo, Welding International, Vol. 14, No. 4, p. 288-294, 2000
  • Microstructural Features and Corrosion Properties in LASER Welded Duplex Stainless Steels, Tomohiko Omura,Takahiro Kushida,Yuichi Komizo, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 68, No. 6, p. 475-478, 1999
  • Corrosion resistance of 13% chromium stainless steel welded joints in flow line applications, M Ueda,H Amaya,H Hirata,K Kondo,Y Murata,Y Komizo, ADVANCES IN CORROSION CONTROL AND MATERIALS IN OIL AND GAS PRODUCTION, IOM COMMUNICATIONS LTD, No. 26, p. 267-273, 1999
  • Strategy of Material Development and Joining Research in 21 st Century, Yu-ichi Komizo, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 67, No. 1, p. 35-38, 1998
  • Effect of AI content on Critical CTOD Properties in Heat Affected Zone of C-Mn Microalloyed Steel, Yasuto Fukada,Yu-Ichi Komizo, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 10, No. 3, p. 409-415, 1992
  • Performance of welded joint of TMCP steel plates, yu-Ichi Komizo, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 59, No. 7, p. 498-501, 1990

Misc.

  • Welding is interesting, Yu-Ichi Komizo, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Japan Welding Society, Vol. 85, No. 8, p. 703-706, 2016
  • 相変態を極める : ミクロ組織変化のその場観察, 小溝 裕一, 熱処理, Vol. 53, No. 3, p. 135-135, 2013/06/28
  • 鉄鋼材料の機械的性質に及ぼすベイナイト効果, 伊木泰久,仲井清眞,阪本辰顕,小林千悟,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 26, No. 1, 2013/03/01
  • 鉄鋼材料中における粒内ベイナイト形成に及ぼすA<sub>1</sub>点以下での前処理効果, 中居啓介,仲井清眞,阪本辰顕,小林千悟,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 26, No. 1, 2013/03/01
  • アシキュラーフェライト・ラスの核生成およびその特殊な集合体生成, 仲井清眞,阪本辰顕,津山忠久,秋山芽衣,高橋文平,中居啓介,小溝裕一,濱田昌彦,小林千悟, 材料とプロセス(CD-ROM), Vol. 26, No. 1, 2013/03/01
  • Correlation between the thermodynamic stability of austenite and the shear modulus of polycrystalline steel alloy (vol 111, 093523, 2012), H. Terasaki,H. Yamagishi,K. Moriguchi,Y. Tomio,Y. Komizo, JOURNAL OF APPLIED PHYSICS, AMER INST PHYSICS, Vol. 112, No. 7, 2012/10
  • 鉄鋼材料中における溶体化前処理の粒内ベイナイト形成への効果, 中居啓介,仲井清眞,阪本辰顕,小林千悟,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 25, No. 2, 2012/09/01
  • 鉄鋼材料中の粒内ベイナイト生成に及ぼす時効処理の効果, 中居啓介,篠崎雄次,仲井清眞,阪本辰顕,小林千悟,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 25, No. 2, 2012/09/01
  • 粒内ベイナイト生成に及ぼす小角粒界密度の効果とその機械的特性への影響, 能丸慶太,仲井清眞,阪本辰顕,小林千悟,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 25, No. 1, 2012/03/01
  • 粒界ベイナイトの性状解析とその機械的性質に及ぼす効果, 伊木泰久,仲井清眞,阪本辰顕,小林千悟,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 25, No. 1, 2012/03/01
  • 鉄鋼材料におけるSおよび溶体化処理前加工の粒内ベイナイト形成への効果, 中居啓介,仲井清眞,阪本辰顕,小林千悟,濱田昌彦,小溝裕一, 日本鉄鋼協会中国四国支部・日本金属学会中国四国支部講演大会講演概要集, Vol. 55th-52nd, 2012
  • 粒内ベイナイト鋼の機械的性質に及ぼす粒界ベイナイトの影響, 伊木泰久,仲井清眞,阪本辰顕,小林千悟,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 24, No. 2, 2011/09/01
  • ベイナイト鋼における機械的性質に及ぼす溶体化温度の効果, 能丸慶太,仲井清眞,阪本辰顕,小林千悟,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 24, No. 2, 2011/09/01
  • In-situ observation of microstructural evolution and dynamic characteristics of 9Ni-steel under the cooling cycle including martensitic transformation, TERASAKI Hidenori,YAMAGISHI Hideki,MORIGUCHI Koji,TOMIO Yusaku,KOMIZO Yu-ichi, Vol. 89, p. 98-99, 2011/08/18
  • Analysis for acicular ferrite in low carbon steel weld metals of various welding processes, TAKADA Atsushi,TERASAKI Hidenori,KOMIZO Yu-ichi,MURAKAMI Yoshiaki,OI Kenji,YASUDA Koichi, Vol. 89, p. 94-95, 2011/08/18
  • Variant analysis in bainite transformation, MAMAT Sarizam Bin,TERASAKI Hidenori,KOMIZO Yuichi, Vol. 89, p. 92-93, 2011/08/18
  • In-Situ observation of primary gamma &apos; melting in Ni-base superalloy using confocal laser scanning microscopy, M. M. Attallah,H. Terasaki,R. J. Moat,S. E. Bray,Y. Komizo,M. Preuss, MATERIALS CHARACTERIZATION, ELSEVIER SCIENCE INC, Vol. 62, No. 8, p. 760-767, 2011/08
  • In-Situ observation of primary gamma &apos; melting in Ni-base superalloy using confocal laser scanning microscopy, M. M. Attallah,H. Terasaki,R. J. Moat,S. E. Bray,Y. Komizo,M. Preuss, MATERIALS CHARACTERIZATION, ELSEVIER SCIENCE INC, Vol. 62, No. 8, p. 760-767, 2011/08
  • Variant Selection of Low Carbon High Alloy Steel within an Austenite Grain during Martensite Transformation, Shuoyuan Zhang,Shigekazu Morito,Yu-ichi Komizo, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 97, No. 7, p. 399-405, 2011/07
  • In situ studies of nonlinear d-spacing changes in titanium and steel alloys, Hidenori Terasaki,Yu-hei Yamamoto,Yu-ichi Komizo, MATERIALS LETTERS, ELSEVIER SCIENCE BV, Vol. 65, No. 12, p. 1745-1748, 2011/06
  • In situ studies of nonlinear d-spacing changes in titanium and steel alloys, Hidenori Terasaki,Yu-hei Yamamoto,Yu-ichi Komizo, MATERIALS LETTERS, ELSEVIER SCIENCE BV, Vol. 65, No. 12, p. 1745-1748, 2011/06
  • 粒内ベイナイト生成過程に及ぼす転位網の効果, 上田博之,仲井清眞,小林千悟,阪本辰顕,能丸慶太,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 24, No. 1, 2011/03/01
  • 粒内ベイナイト鋼の機械的性質に及ぼす粒界ベイナイトの影響, 高橋侑也,仲井清眞,小林千悟,阪本辰顕,伊木泰久,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 24, No. 1, 2011/03/01
  • In-situ observation of elastic parameters during martensitic transformation of low temperature transformation steel, H. Terasaki,H. Yamagishi,K. Moriguchi,Y. Tomio,Y. Komizo, The International Conference on Martensitic Transformations (ICOMAT) 2011, 2011
  • 粒内ベイナイト生成に及ぼす小角粒界の効果, 能丸慶太,仲井清眞,阪本辰顕,小林千悟,濱田昌彦,小溝裕一, 日本鉄鋼協会中国四国支部・日本金属学会中国四国支部講演大会講演概要集, Vol. 54th-51st, 2011
  • 鉄鋼材料中のALPSサイズ等に及ぼす介在物の効果, 篠崎雄次,中居啓介,阪本辰顕,仲井清眞,小林千悟,濱田昌彦,小溝裕一, 日本鉄鋼協会中国四国支部・日本金属学会中国四国支部講演大会講演概要集, Vol. 54th-51st, 2011
  • 鉄鋼材料の機械的性質に及ぼす粒界ベイナイトの効果, 伊木泰久,仲井清眞,阪本辰顕,小林千悟,濱田昌彦,小溝裕一, 日本鉄鋼協会中国四国支部・日本金属学会中国四国支部講演大会講演概要集, Vol. 54th-51st, 2011
  • Optical observation of real materials using laser scanning confocal microscopy Part 1-techniques and observed examples of microstructural changes, Y. Komizo,H. Terasaki, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, MANEY PUBLISHING, Vol. 16, No. 1, p. 56-60, 2011/01
  • Diffusional and displacive transformation behaviour in low carbon-low alloy steels studied by a hybrid in situ observation system, Scripta Materialia, Vol. Vol.64, pp.29-32, 2011
  • In situ time resolved X-ray diffraction using synchrotron, Y. Komizo,H. Terasaki, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, MANEY PUBLISHING, Vol. 16, No. 1, p. 79-86, 2011/01
  • Optical observation of real materials using laser scanning confocal microscopy Part 2-direct observation of ferrite nucleation sites in weld metal and heat affected zone, Y. Komizo,H. Terasaki, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, MANEY PUBLISHING, Vol. 16, No. 1, p. 61-67, 2011/01
  • Nucleation of Bainite at Small Angle Dislocation Network in Austenite and Its Effects on Mechanical Properties in Steels, Kiyomichi Nakai,Tatsuaki Sakamoto,Ryo Asakura,Yuki Kotani,Noriyo Isomura,Sengo Kobayashi,Masahiko Hamada,Yu-ichi Komizo, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 51, No. 2, p. 274-279, 2011
  • 計測がもたらす溶接の科学と技術, 溶接技術, Vol. Vol.59, No.5, pp.84-89, 2011
  • 二相ステンレス鋼レーザ溶接部の組織と耐食性, 第75回レーザ加工学会講演論文集, Vol. Vol.74, pp.139-142, 2011
  • MnSおよび小角粒界におけるBWING核生成と機械的性質に及ぼすALPSの効果, 日本鉄鋼協会研究会「非金属介在物の固相内組織組成制御研究会」最終報告書, Vol. No.10, pp.1-11, 2011
  • In-situ analysis of effects of transformation strain on the austenite phase during martenistic transformation of Cr-Ni steel, Hidenori Terasaki,Zhang Shouyuan,Yu-ichi Komizo, SOLID-SOLID PHASE TRANSFORMATIONS IN INORGANIC MATERIALS, PTS 1-2, TRANS TECH PUBLICATIONS LTD, Vol. 172-174, p. 1255-1260, 2011
  • In-situ study of microstructural development during phase transformation in welding process, Hidenori Terasaki,Yu-ichi Komizo, SOLID-SOLID PHASE TRANSFORMATIONS IN INORGANIC MATERIALS, PTS 1-2, TRANS TECH PUBLICATIONS LTD, Vol. 172-174, p. 1261-1266, 2011
  • Variant Selection of Low Carbon High Alloy Steel within an Austenite Grain during Martensite Transformation, Zhang Shuoyuan,Morito Shigekazu,Komizo Yu-ichi, Tetsu-to-Hagane, The Iron and Steel Institute of Japan, Vol. 97, No. 7, p. 399-405, 2011
  • Correlation of delta-ferrite precipitation with austenite grain growth during annealing of steels, X. F. Zhang,H. Terasaki,Y. Komizo, PHILOSOPHICAL MAGAZINE LETTERS, TAYLOR & FRANCIS LTD, Vol. 91, No. 7, p. 491-497, 2011
  • Diffusional and displacive transformation behaviour in low carbon-low alloy steels studied by a hybrid in situ observation system, Hidenori Terasaki,Yu-ichi Komizo, SCRIPTA MATERIALIA, PERGAMON-ELSEVIER SCIENCE LTD, Vol. 64, No. 1, p. 29-32, 2011/01
  • Optical observation of real materials using laser scanning confocal microscopy Part 1-techniques and observed examples of microstructural changes, Y. Komizo,H. Terasaki, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, MANEY PUBLISHING, Vol. 16, No. 1, p. 56-60, 2011/01
  • Optical observation of real materials using laser scanning confocal microscopy Part 2-direct observation of ferrite nucleation sites in weld metal and heat affected zone, Y. Komizo,H. Terasaki, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, MANEY PUBLISHING, Vol. 16, No. 1, p. 61-67, 2011/01
  • In situ time resolved X-ray diffraction using synchrotron, Y. Komizo,H. Terasaki, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, MANEY PUBLISHING, Vol. 16, No. 1, p. 79-86, 2011/01
  • Nucleation of Bainite at Small Angle Dislocation Network in Austenite and Its Effects on Mechanical Properties in Steels, Kiyomichi Nakai,Tatsuaki Sakamoto,Ryo Asakura,Yuki Kotani,Noriyo Isomura,Sengo Kobayashi,Masahiko Hamada,Yu-ichi Komizo, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 51, No. 2, p. 274-279, 2011
  • In-situ analysis of effects of transformation strain on the austenite phase during martenistic transformation of Cr-Ni steel, Hidenori Terasaki,Zhang Shouyuan,Yu-ichi Komizo, SOLID-SOLID PHASE TRANSFORMATIONS IN INORGANIC MATERIALS, PTS 1-2, TRANS TECH PUBLICATIONS LTD, Vol. 172-174, p. 1255-1260, 2011
  • In-situ study of microstructural development during phase transformation in welding process, Hidenori Terasaki,Yu-ichi Komizo, SOLID-SOLID PHASE TRANSFORMATIONS IN INORGANIC MATERIALS, PTS 1-2, TRANS TECH PUBLICATIONS LTD, Vol. 172-174, p. 1261-1266, 2011
  • Correlation of delta-ferrite precipitation with austenite grain growth during annealing of steels, X. F. Zhang,H. Terasaki,Y. Komizo, PHILOSOPHICAL MAGAZINE LETTERS, TAYLOR & FRANCIS LTD, Vol. 91, No. 7, p. 491-497, 2011
  • In-situ Observation of Martensite Transformation and Retained Austenite in Supermartensitic Stainless Steel, Shuoyuan Zhang,Hidenori Terasaki,Yu-ichi Komizo, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 96, No. 12, p. 691-697, 2010/12
  • In-situ Observation of Martensite Transformation and Retained Austenite in Supermartensitic Stainless Steel, Shuoyuan Zhang,Hidenori Terasaki,Yu-ichi Komizo, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 96, No. 12, p. 691-697, 2010/12
  • In-situ Observation of Martensite Transformation and Retained Austenite in Supermartensitic Stainless Steel, Shuoyuan Zhang,Hidenori Terasaki,Yu-ichi Komizo, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 96, No. 12, p. 691-697, 2010/12
  • Mechanism of Acicular Ferrite Formation in Low Carbon Steel Ti-B Weld Metals with Different Oxygen Levels, Tomonori Yamada,Hidenori Terasaki,Yu-ichi Komizo, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 96, No. 10, p. 608-613, 2010/10
  • 鉄鋼材料の機械的性質に及ぼすベイナイト・ラス生成過程の効果, 上田博之,仲井清眞,小林千悟,阪本辰顕,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 23, No. 2, 2010/09/01
  • 鉄鋼材料強靭化に及ぼす粒内ベイナイト生成過程の効果, 仲井清眞,阪本辰顕,小林千悟,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 23, No. 2, 2010/09/01
  • In-situ Observation of retained austenite during martensitic transformation of high alloy steel, ZHANG Shuoyuan,TERASAKI Hidenori,KOMIZO Yu-ichi, Vol. 36, No. 3, p. 7-8, 2010/05/20
  • 鉄鋼材料中のAF核生成過程の機械的性質に及ぼす効果, 上田博之,小谷祐樹,仲井清眞,小林千悟,阪本辰顕,篠崎雄次,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 23, No. 1, 2010/03/01
  • 低炭素鋼の破壊挙動に及ぼすAF微細組織の影響, 上田博之,仲井清眞,小林千悟,阪本辰顕,篠崎雄次,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 23, No. 1, 2010/03/01
  • 鉄鋼材料の変形および破壊過程に及ぼす微細組織の効果, 高橋侑也,仲井清眞,小林千悟,阪本辰顕,土田学,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 23, No. 1, 2010/03/01
  • In situ observation of the formation of intragranular acicular ferrite at non-metallic inclusions in C-Mn steel, Di Zhang,Hidenori Terasaki,Yu-ichi Komizo, ACTA MATERIALIA, PERGAMON-ELSEVIER SCIENCE LTD, Vol. 58, No. 4, p. 1369-1378, 2010/02
  • Observation for Transition Behavior of Oxide Inclusions on Gas Pressure Weld Interface : Welding Phenomena of Gas Pressure Welding, YAMAMOTO Ryu-ichi,FUKADA Yasuto,TATSUMI Mitsumasa,KOMIZO Yu-ichi, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 27, No. 3, p. 222-229, 2010/01/20
  • Effect of Tensile Strength and Boron Addition on Microstructure and Toughness of Weld Metal Containing Ti, HAMADA Masahiko,OKAGUCHI Shuji,KOMIZO Yu-ichi, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, JAPAN WELDING SOCIETY, Vol. 27, No. 1, p. 1-6, 2010/01/20
  • 鉄鋼材料中の粒内ペイナイト生成に及ぼす介在物の効果, 篠崎雄次,棗田浩和,仲井清眞,小林千悟,阪本辰顕,濱田昌彦,小溝裕一, 日本鉄鋼協会中国四国支部・日本金属学会中国四国支部講演大会講演概要集, Vol. 53rd-50th, 2010
  • In Situ Study of Phase Transformation in Steel During Welding, Yu-ichi Komizo,Hidenori Terasaki, IN-SITU STUDIES WITH PHOTONS, NEUTRONS AND ELECTRONS SCATTERING, SPRINGER-VERLAG BERLIN, Vol. Vol.4, pp.303-307, p. 1-11, 2010
  • Experimental Examination for Understanding of Transition Behavior of Oxide Inclusions on Gas Pressure Weld Interface - Joining Phenomena of Gas Pressure Welding -:- Joining Phenomena of Gas Pressure Welding -, YAMAMOTO Ryu-ichi,KOMIZO Yu-ichi,FUKADA Yasuto, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, JAPAN WELDING SOCIETY, Vol. 28, No. 2, p. 167-176, 2010
  • 溶接冶金学I-2 鉄鋼材料の溶接メタラジー, 平成22年度溶接工学夏季大学教材, Vol. pp.89-106, 2010
  • IN SITU OBSERVATION OF PHASE TRANSFORMATIONS IN Fe-0.08C ALLOY, Di Zhang,Hidenori Terasaki,Yuichi Komizo, CHARACTERIZATION AND CONTROL OF INTERFACES FOR HIGH QUALITY ADVANCED MATERIALS III, AMER CERAMIC SOC, Vol. 219, p. 397-402, 2010
  • On the application of multi-phase field modeling to the micro-stractural change in welding process, Trans. JWRI, Vol. Vol.39, No.1, pp.43-46, 2010
  • Mechanism of Acicular Ferrite Formation in Low Carbon Steel Ti-B Weld Metals with Different Oxygen Levels, Yamada Tomonori,Terasaki Hidenori,Komizo Yu-ichi, Tetsu-to-Hagane, The Iron and Steel Institute of Japan, Vol. 96, No. 10, p. 608-613, 2010
  • In-situ studies with photons, neutrons and electrons scattering, Thomas Kannengiesser,Yu-Ichi Komizo,Sudarsanam Suresh Babu,Antonio J. Ramirez, In-situ Studies with Photons, Neutrons and Electrons Scattering, Springer Berlin Heidelberg, p. 1-204, 2010
  • Developments of hybrid in-situ observation system to study the microstructural change of metallic alloys, Trans. JWRI, Vol. Vol.39, No.2, pp314-316, 2010
  • Developments of real-time monitoring method of welding, Trans. JWRI, Vol. Vol.39, No.2, pp367-369, 2010
  • 高エネルギーX線回折と共焦点レーザー顕微鏡を用いた残留オーステナイト量が異なる低炭素高合金鋼のマルテンサイト変態のその場観察, 鉄と鋼, Vol. Vol.96, No.12, pp.691-697, 2010
  • In-situ observation of phase transformation during laser welding processes, Trans. JWRI, Vol. Vol.39, No.2, pp118-119, 2010
  • 組織変化のその場観察, チタン, Vol. Vol.58, No.1, pp.10-14, 2010
  • Morphological and Crystallographic Evolution of Bainite Transformation in Fe-0.15C Binary Alloy, Di Zhang,Hidenori Terasaki,Yuichi. Komizo, MICROSCOPY RESEARCH AND TECHNIQUE, WILEY-LISS, Vol. 73, No. 1, p. 67-70, 2010/01
  • In-situ Observation of Solidification Behavior during Welding, Yu-ichi Komizo,Hidenori Terasaki, THERMEC 2009, PTS 1-4, TRANS TECH PUBLICATIONS LTD, Vol. 638-642, p. 3722-3726, 2010
  • Two-dimensional time-resolved x-ray diffraction study of dual phase rapid solidification in steels, Mitsuharu Yonemura,Takahiro Osuki,Hidenori Terasaki,Yuichi Komizo,Masugu Sato,Hidenori Toyokawa,Akiko Nozaki, JOURNAL OF APPLIED PHYSICS, AMER INST PHYSICS, Vol. 107, No. 1, 2010/01
  • 共焦点走査型レーザ顕微鏡と放射光を用いたX線回折による低炭素高合金鋼マルテンサイト変態過程のその場観察, 鉄と鋼, Vol. Vol.96, No.2, pp.64-69, 2010
  • Experimental examination for understanding of transition behavior of oxide inclusions on gas pressure weld interface - Joining phenomena of gas pressure welding, Yamamoto Ryu-Ichi,Komizo Yu-Ichi,Fukada Yasuto, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 28, No. 2, p. 167-176, 2010
  • In-situ study of phase transformation in steel during welding, Conference proceedings ISOPE-2010, Vol. Vol.4, pp.303-307, 2010
  • In-situ observation of martensite transformation and retained austenite in supermartensitic steel, Conference proceedings ISOPE-2010, Vol. Vol.4, pp.308-311, 2010
  • IN SITU OBSERVATION OF PHASE TRANSFORMATIONS IN Fe-0.08C ALLOY, Di Zhang,Hidenori Terasaki,Yuichi Komizo, CHARACTERIZATION AND CONTROL OF INTERFACES FOR HIGH QUALITY ADVANCED MATERIALS III, AMER CERAMIC SOC, Vol. 219, p. 397-402, 2010
  • On the application of multi-phase field modeling to the micro-stractural change in welding process, Trans. JWRI, Vol. Vol.39, No.1, pp.43-46, 2010
  • In-situ studies with photons, neutrons and electrons scattering, Thomas Kannengiesser,Yu-Ichi Komizo,Sudarsanam Suresh Babu,Antonio J. Ramirez, In-situ Studies with Photons, Neutrons and Electrons Scattering, Springer Berlin Heidelberg, p. 1-204, 2010
  • In-situ observation of phase transformation during laser welding processes, Trans. JWRI, Vol. Vol.39, No.2, pp118-119, 2010
  • In-situ Observation of Martensite Transformation and Retained Austenite in Supermartensitic Stainless Steel, Zhang Shuoyuan,Terasaki Hidenori,Komizo Yu-ichi, Tetsu-to-Hagane, The Iron and Steel Institute of Japan, Vol. 96, No. 12, p. 691-697, 2010
  • Developments of hybrid in-situ observation system to study the microstructural change of metallic alloys, Trans. JWRI, Vol. Vol.39, No.2, pp314-316, 2010
  • Developments of real-time monitoring method of welding, Trans. JWRI, Vol. Vol.39, No.2, pp367-369, 2010
  • Two-dimensional time-resolved x-ray diffraction study of dual phase rapid solidification in steels, Mitsuharu Yonemura,Takahiro Osuki,Hidenori Terasaki,Yuichi Komizo,Masugu Sato,Hidenori Toyokawa,Akiko Nozaki, JOURNAL OF APPLIED PHYSICS, AMER INST PHYSICS, Vol. 107, No. 1, 2010/01
  • Morphological and Crystallographic Evolution of Bainite Transformation in Fe-0.15C Binary Alloy, Di Zhang,Hidenori Terasaki,Yuichi. Komizo, MICROSCOPY RESEARCH AND TECHNIQUE, WILEY-LISS, Vol. 73, No. 1, p. 67-70, 2010/01
  • In situ observation of the formation of intragranular acicular ferrite at non-metallic inclusions in C-Mn steel, Acta Materialia, Vol. Vol.58, pp.1369-1378, 2010
  • In-situ Microstructure Observation Techniques in Welding, Titanium Japan, Vol. Vol.58, No.1, pp.10-14, 2010
  • In-situ Observation of Solidification Behavior during Welding, Yu-ichi Komizo,Hidenori Terasaki, THERMEC 2009, PTS 1-4, TRANS TECH PUBLICATIONS LTD, Vol. 638-642, p. 3722-3726, 2010
  • In-Situ Observation of Martensite Transformation of Low Carbon High Alloy Steel Using High Temperature Laser Scanning Confocal Microscopy and X-ray Diffraction by Synchrotron Radiation, Zhang Shuoyuan,Terasaki Hidenori,Komizo Yu-ichi, Tetsu-to-Hagane, The Iron and Steel Institute of Japan, Vol. 96, No. 2, p. 64-69, 2010
  • Hot Cracking Susceptibility on Alloy Tool Steel SKD 61 in Repair Welding, HASHIMOTO Tadafumi,TERASAKI Hidenori,KOMIZO Yu-ichi, Vol. 49, No. 6, p. 338-342, 2009/12/28
  • Effect of Silicon Content on Hot Cracking Susceptibility of Alloy Tool Steel SKD 61, HASHIMOTO Tadafumi,TERASAKI Hidenori,KOMIZO Yu-ichi, Vol. 49, No. 6, p. 343-346, 2009/12/28
  • ANALYSIS OF THE SOLIDIFICATION PROCESS OF AUSTENITIC STAINLESS STEEL WELD METAL USING SYNCHROTRON RADIATION, T. Osuki,M. Yonemura,K. Ogawa,Y. -i. Komizo,H. Terasaki, WELDING IN THE WORLD, INT INST WELDING, Vol. 53, No. 11-12, p. R290-R303, 2009/11
  • ANALYSIS OF THE SOLIDIFICATION PROCESS OF AUSTENITIC STAINLESS STEEL WELD METAL USING SYNCHROTRON RADIATION, T. Osuki,M. Yonemura,K. Ogawa,Y. -i. Komizo,H. Terasaki, WELDING IN THE WORLD, INT INST WELDING, Vol. 53, No. 11-12, p. R290-R303, 2009/11
  • 鉄鋼材料中のAF核生成サイトとしての小角粒界の導入, 小谷祐樹,香川義博,上田博之,仲井清眞,小林千悟,阪本辰顕,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 22, No. 2, 2009/09/01
  • 鉄鋼材料中のベイナイト生成に及ぼす前処理およびその材料破壊に及ぼす効果, 高橋侑也,仲井清眞,小林千悟,阪本辰顕,土田学,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 22, No. 2, 2009/09/01
  • 低炭素鋼の機械的性質に及ぼすS添加に伴うAF微細組織変化の効果, 上田博之,小谷祐樹,仲井清眞,小林千悟,阪本辰顕,篠崎雄次,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 22, No. 2, 2009/09/01
  • 鉄鋼材料における機械的性質に及ぼすオーステナイト化前処理の効果, 高橋侑也,朝倉亮,仲井清眞,小林千悟,阪本辰顕,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 22, No. 2, 2009/09/01
  • In situ observation of phase transformation in Fe-0.15C binary alloy, Di Zhang,Hidenori Terasaki,Yu-ichi Komizo, JOURNAL OF ALLOYS AND COMPOUNDS, ELSEVIER SCIENCE SA, Vol. 484, No. 1-2, p. 929-933, 2009/09
  • In situ observation of phase transformation in Fe-0.15C binary alloy, Di Zhang,Hidenori Terasaki,Yu-ichi Komizo, JOURNAL OF ALLOYS AND COMPOUNDS, ELSEVIER SCIENCE SA, Vol. 484, No. 1-2, p. 929-933, 2009/09
  • Bioactive titanate nanomesh layer on the Ti-based bulk metallic glass by hydrothermal-electrochemical technique, Naota Sugiyama,HaiYan Xu,Takamasa Onoki,Yasuto Hoshikawa,Tomoaki Watanabe,Nobuhiro Matsushita,Xinmin Wang,FengXiang Qin,Mikio Fukuhara,Masahiro Tsukamoto,Nobuyuki Abe,Yuichi Komizo,Akihisa Inoue,Masahiro Yoshimura, ACTA BIOMATERIALIA, ELSEVIER SCI LTD, Vol. 5, No. 4, p. 1367-1373, 2009/05
  • Bioactive titanate nanomesh layer on the Ti-based bulk metallic glass by hydrothermal-electrochemical technique, Naota Sugiyama,HaiYan Xu,Takamasa Onoki,Yasuto Hoshikawa,Tomoaki Watanabe,Nobuhiro Matsushita,Xinmin Wang,FengXiang Qin,Mikio Fukuhara,Masahiro Tsukamoto,Nobuyuki Abe,Yuichi Komizo,Akihisa Inoue,Masahiro Yoshimura, ACTA BIOMATERIALIA, ELSEVIER SCI LTD, Vol. 5, No. 4, p. 1367-1373, 2009/05
  • 鉄鋼材料の機械的性質に及ぼすアシキュラー・フェライト核生成過程の効果, 小谷祐樹,香川義博,上田博之,仲井清眞,小林千悟,阪本辰顕,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 22, No. 1, 2009/03/01
  • オーステナイト化前処理の粒内ベイナイト生成に及ぼす効果, 高橋侑也,朝倉亮,仲井清眞,小林千悟,阪本辰顕,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 22, No. 1, 2009/03/01
  • 鉄鋼材料の機械的性質に及ぼすAF生成過程の効果, 高橋侑也,土田学,仲井清眞,小林千悟,阪本辰顕,濱田昌彦,小溝裕一, 日本鉄鋼協会中国四国支部・日本金属学会中国四国支部講演大会講演概要集, Vol. 52nd-49th, 2009
  • Microstructural evolution in low carbon steel Ti-B weld metals with several Al levels, Tomonori Yamada,Hidenori Terasaki,Yuichi Komizo, Welding International, Vol. 23, No. 5, p. 376-381, 2009
  • Influence of martensitic islands on fracture behaviour of high heat input weld HAZ, Shuichi Suzuki,Takahiro Kamo,Yuichi Komizo, Welding International, Vol. 23, No. 6, p. 397-402, 2009
  • Effect of tip velocity on weld solidification process of hot-work tool steel, Tadafumi Hashimoto,Hidenori Terasaki,Yuichi Komizo, Welding International, Vol. 23, No. 6, p. 431-438, 2009
  • Analytical Investigation of Inclusions Related to Acicular Ferrite Formation in Steel Weld Metal, Transactions of the Materials Research Society of Japan, Vol. Vol.34, No.2, pp.241-244, 2009
  • Formation of Intragranular Ferrite in the HAZ of Titanium-killed Steel, 62nd Annual Assembly of Int. Inst. Welding (IIW), Vol. IIW Doc. IX-2300-09, 2009
  • Relation between Inclusion Surface and Acicular Ferrite in Low Carbon Low Alloy Steel Weld, Tomonori Yamada,Hidenori Terasak,Yu-ichi Komizo, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 49, No. 7, p. 1059-1062, 2009
  • Solidification cracking susceptibility of alloy tool steel under rapid solidification, Tadafumi Hashimoto,Hidenori Terasaki,Yu-Ichi Komizo, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 27, No. 2, 2009
  • In-situ observation of microstructure evolution in heat-affected-zone of Ti-killed steel weld, Yoshinori Tanimoto,Hidenori Terasaki,Yu-Ichi Komizo, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 27, No. 2, 2009
  • In-situ observation of solidification behavior of 14Cr-Ni steel weld, Hidenori Terasaki,Kazuhisa Yanagita,Yu-Ichi Komizo,Masugu Sato,Hidenori Toyokawa, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 27, No. 2, 2009
  • Lattice misfit between inclusion and acicular ferrite in weld metal of low carbon low alloy steel, Tomonori Yamada,Hidenori Terasaki,Yu Ichi Komizo, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 27, No. 2, 2009
  • Fine-Grained Titanium Weld Metal by Titanium Mono-Boride Reinforcement, H. Terasaki,K. Saiki,Y. Komizo, TRENDS IN WELDING RESEARCH, ASM INTERNATIONAL, Vol. pp.531-534, p. 531-534, 2009
  • Direct Observation of Inclusion Formation in Low-Alloy-Steel Welds, H. Terasaki,T. Yamada,Y. Komizo, TRENDS IN WELDING RESEARCH, ASM INTERNATIONAL, Vol. pp.527-530, p. 527-530, 2009
  • Controlling the Phase Evolutions during Welding Toward Developments of High Strength Steel Weld Metal with Martensite Microstructure, Y. Komizo,H. Terasaki, TRENDS IN WELDING RESEARCH, ASM INTERNATIONAL, Vol. pp.268-271, p. 268-271, 2009
  • Microstructure control of titanium weld by addition of boron, Hidenori Terasaki,Keita Saiki,Yu-Hei Yamamoto,Masahiko Ikeda,Yu-Ichi Komizo, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 27, No. 2, 2009
  • 低炭素低合金鋼溶接金属の介在物組成とアシキュラーフェライト生成挙動, 第197回溶接冶金研究委員会, Vol. WM-09, 2009
  • NEDOプロジェクト「鉄鋼材料の革新的高強度・高機能化基盤研究開発」の概要と枠組みについて, 溶接学会誌, Vol. Vol.78, No.6, pp.525-528, 2009
  • Direct Observation of Solidification and Phase Transformation in Pure Titanium, Trans. JWRI, Vol. Vol.38, No.1, pp.43-47, 2009
  • Effects of Small-Angle Boundary on Nucleation of Intragranular Bainite in Steels, Proceedings of the 17th IFHTSE Congress (International Federation for Heat Treatment and Surface Engineering), Vol. pp.620-623, 2009
  • Solidification Cracking in Repair Welding for Alloy Tool Steel, Proceedings of the 17th IFHTSE Congress (International Federation for Heat Treatment and Surface Engineering), Vol. pp.272-275, 2009
  • Effect of Starting Temperature of Bainite Formation on the Evolution of Intragranular Bainite in Steel Welds, Proceedings of the 17th IFHTSE Congress (International Federation for Heat Treatment and Surface Engineering), Vol. pp.616-619, 2009
  • Mechanism of intragranular ferrite formation in heat-affected zone of titanium killed steel, Proceedings of the 5th KWJS-JWS Joint symposium of young researchers, Vol. pp.197-201, 2009
  • ベイン変形エネルギーに基づくオーステナイト相残留挙動予測, 溶接構造シンポジウム2009 講演論文集, Vol. pp.487-492, 2009
  • 共焦点走査型レーザ顕微鏡と放射光を用いたX線回折による低炭素高合金鋼マルテンサイト変態過程のその場観察, 溶接構造シンポジウム2009 講演論文集, Vol. pp.679-682, 2009
  • Microscopic Observation of Inclusions Related to Microstructure Evolution in Low Carbon Steel Ti-B Weld Metal, YAMADA Tomonori,TERASAKI Hidenori,KOMIZO Yu-ich, Tetsu-to-Hagane, The Iron and Steel Institute of Japan (ISIJ), Vol. 95, No. 1, p. 65-70, 2009/01/01
  • Utilization of Ultra-bright-X-ray for assessment of weldability, Proceedings of Asia Steel International Conference 2009, Vol. S8-10, 2009
  • Microstrcture evolution in Heat Affected Zone of Low Carbon Steel in High heat input welding, Proceedings of Asia Steel International Conference 2009, Vol. S8-06, 2009
  • Microstructural evolution in low carbon steel Ti-B weld metals with several Al levels, Tomonori Yamada,Hidenori Terasaki,Yuichi Komizo, Welding International, Vol. 23, No. 5, p. 376-381, 2009
  • Effect of tip velocity on weld solidification process of hot-work tool steel, Tadafumi Hashimoto,Hidenori Terasaki,Yuichi Komizo, Welding International, Vol. 23, No. 6, p. 431-438, 2009
  • Influence of martensitic islands on fracture behaviour of high heat input weld HAZ, Shuichi Suzuki,Takahiro Kamo,Yuichi Komizo, Welding International, Vol. 23, No. 6, p. 397-402, 2009
  • Formation of Intragranular Ferrite in the HAZ of Titanium-killed Steel, 62nd Annual Assembly of Int. Inst. Welding (IIW), Vol. IIW Doc. IX-2300-09, 2009
  • Relation between Inclusion Surface and Acicular Ferrite in Low Carbon Low Alloy Steel Weld, Tomonori Yamada,Hidenori Terasak,Yu-ichi Komizo, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 49, No. 7, p. 1059-1062, 2009
  • Analytical Investigation of Inclusions Related to Acicular Ferrite Formation in Steel Weld Metal, Transactions of the Materials Research Society of Japan, Vol. Vol.34, No.2, pp.241-244, 2009
  • Fine-Grained Titanium Weld Metal by Titanium Mono-Boride Reinforcement, H. Terasaki,K. Saiki,Y. Komizo, TRENDS IN WELDING RESEARCH, ASM INTERNATIONAL, Vol. pp.531-534, p. 531-534, 2009
  • Lattice misfit between inclusion and acicular ferrite in weld metal of low carbon low alloy steel, Tomonori Yamada,Hidenori Terasaki,Yu Ichi Komizo, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 27, No. 2, 2009
  • In-situ observation of microstructure evolution in heat-affected-zone of Ti-killed steel weld, Yoshinori Tanimoto,Hidenori Terasaki,Yu-Ichi Komizo, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 27, No. 2, 2009
  • Controlling the Phase Evolutions during Welding Toward Developments of High Strength Steel Weld Metal with Martensite Microstructure, Y. Komizo,H. Terasaki, TRENDS IN WELDING RESEARCH, ASM INTERNATIONAL, Vol. pp.268-271, p. 268-271, 2009
  • In-situ observation of solidification behavior of 14Cr-Ni steel weld, Hidenori Terasaki,Kazuhisa Yanagita,Yu-Ichi Komizo,Masugu Sato,Hidenori Toyokawa, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 27, No. 2, 2009
  • Microstructure control of titanium weld by addition of boron, Hidenori Terasaki,Keita Saiki,Yu-Hei Yamamoto,Masahiko Ikeda,Yu-Ichi Komizo, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 27, No. 2, 2009
  • Solidification cracking susceptibility of alloy tool steel under rapid solidification, Tadafumi Hashimoto,Hidenori Terasaki,Yu-Ichi Komizo, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 27, No. 2, 2009
  • Direct Observation of Inclusion Formation in Low-Alloy-Steel Welds, H. Terasaki,T. Yamada,Y. Komizo, TRENDS IN WELDING RESEARCH, ASM INTERNATIONAL, Vol. pp.527-530, p. 527-530, 2009
  • Direct Observation of Solidification and Phase Transformation in Pure Titanium, Trans. JWRI, Vol. Vol.38, No.1, pp.43-47, 2009
  • Observation for transition behavior of oxide inclusions on gas pressure weld interface: Welding phenomena of gas pressure welding, Ryu-Ichi Yamamoto,Yasuto Fukada,Mitsumasa Tatsumi,Yu-Ichi Komizo, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 27, No. 3, p. 222-229, 2009
  • Effects of Small-Angle Boundary on Nucleation of Intragranular Bainite in Steels, Proceedings of the 17th IFHTSE Congress (International Federation for Heat Treatment and Surface Engineering), Vol. pp.620-623, 2009
  • Solidification Cracking in Repair Welding for Alloy Tool Steel, Proceedings of the 17th IFHTSE Congress (International Federation for Heat Treatment and Surface Engineering), Vol. pp.272-275, 2009
  • Effect of Starting Temperature of Bainite Formation on the Evolution of Intragranular Bainite in Steel Welds, Proceedings of the 17th IFHTSE Congress (International Federation for Heat Treatment and Surface Engineering), Vol. pp.616-619, 2009
  • Mechanism of intragranular ferrite formation in heat-affected zone of titanium killed steel, Proceedings of the 5th KWJS-JWS Joint symposium of young researchers, Vol. pp.197-201, 2009
  • Hot Cracking Susceptibility on Alloy tool Steel SKD 61 in Repair Welding, Journal of the Japan Society for Heat Treatment, Vol. Vol.49, No.6, pp.338-342, 2009
  • Effect of Silicon Content on Hot Cracking Susceptibility of Alloy Tool Steel SKD 61, Journal of the Japan Society for Heat Treatment, Vol. Vol.49, No.6, pp.343-346, 2009
  • Effect of tensile strength and boron addition on microstructure and toughness of weld metal containing Ti, Masahiko Hamada,Shuji Okaguchi,Yu-Ichi Komizo, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 27, No. 1, p. 1-6, 2009
  • Microstrcture evolution in Heat Affected Zone of Low Carbon Steel in High heat input welding, Proceedings of Asia Steel International Conference 2009, Vol. S8-06, 2009
  • Utilization of Ultra-bright-X-ray for assessment of weldability, Proceedings of Asia Steel International Conference 2009, Vol. S8-10, 2009
  • 鉄鋼材料溶接部の機械的性質に及ぼす下部微細組織の効果, 真鍋一生,仲井清眞,小林千悟,阪本辰顕,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 21, No. 2, 2008/09/01
  • 鉄鋼材料の機械的性質に及ぼす溶体化前処理の効果, 朝倉亮,仲井清眞,小林千悟,阪本辰顕,磯村紀世,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 21, No. 2, 2008/09/01
  • 粒内ベイナイト核生成サイトに及ぼすSの効果, 香川義博,仲井清眞,小林千悟,阪本辰顕,小谷祐樹,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 21, No. 2, 2008/09/01
  • NiおよびB添加が鉄鋼材料溶接部の微細組織形成に及ぼす効果, 真鍋一生,仲井清眞,小林千悟,阪本辰顕,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 21, No. 2, 2008/09/01
  • The Lattice Misfit between Inclusion and Acicular Ferrite : Microscopic Observation of Inclusions Related to Acicular Ferrite Formation in Steel Weld Metal (Report3), YAMADA Tomonori,TERASAKI Hidenori,KOMIZO Yu-ichi, Pre-Prints of the National Meeting of JWS, Japan Welding Society, Vol. 83, p. 142-143, 2008/08/20
  • Effect of solidification velocity on weld solidification process of alloy tool steel, T. Hashimoto,H. Terasaki,Y. Komizo, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, MANEY PUBLISHING, Vol. 13, No. 4, p. 409-414, 2008/07
  • Effect of solidification velocity on weld solidification process of alloy tool steel, T. Hashimoto,H. Terasaki,Y. Komizo, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, MANEY PUBLISHING, Vol. 13, No. 4, p. 409-414, 2008/07
  • EDS Analysis of Inclusions Related to Acicular Ferrite Formation in Steel Weld Metal : Microscopic Observation of Inclusions Related to Acicular Ferrite Formation in Steel Weld Metal (Report2), YAMADA Tomonori,TERASAKI Hidenori,KOMIZO Yu-ichi, Pre-Prints of the National Meeting of JWS, Japan Welding Society, Vol. 82, p. 108-109, 2008/03/17
  • ベイナイト組織を利用した高強度・高靭性鋼の開発, 仲井清眞,小林千悟,阪本辰顕,濱田昌彦,小溝裕一, 愛媛大学社会連携推進機構研究成果報告書, No. 1, p. 23-27, 2008/03
  • ベイナイト・ラスの小角粒界への核生成に関する結晶学的検討, 阪本辰顕,山田知典,仲井清眞,小林千悟,濱田昌彦,寺崎秀紀,小溝裕一, 材料とプロセス(CD-ROM), Vol. 21, No. 1, 2008/03/01
  • 粒内ベイナイト微細化に及ぼすSの効果, 香川義博,小谷祐樹,仲井清眞,小林千悟,阪本辰顕,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 21, No. 1, 2008/03/01
  • 溶体化前処理の粒内ベイナイト生成及び機械的性質に及ぼす影響, 朝倉亮,仲井清眞,小林千悟,阪本辰顕,磯村紀世,真鍋一生,濱田昌彦,小溝裕一, 材料とプロセス(CD-ROM), Vol. 21, No. 1, 2008/03/01
  • Microscopic observation of inclusions contributing to formation of acicular ferrite in steel weld metal, T. Yamada,H. Terasaki,Y. Komizo, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, MANEY PUBLISHING, Vol. 13, No. 2, p. 118-125, 2008/03
  • Microscopic observation of inclusions contributing to formation of acicular ferrite in steel weld metal, T. Yamada,H. Terasaki,Y. Komizo, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, MANEY PUBLISHING, Vol. 13, No. 2, p. 118-125, 2008/03
  • NiおよびB添加が鉄鋼材料溶接部の微細組織形成に及ぼす効果, 真鍋一生,仲井清眞,小林千悟,阪本辰顕,濱田昌彦,小溝裕一, 日本鉄鋼協会中国四国支部・日本金属学会中国四国支部講演大会講演概要集, Vol. 51st-48th, 2008
  • 溶接性評価のためのin-situ材料評価技術利用, (社)日本材料学会 第45回X線材料強度に関する討論会講演論文集, Vol. pp.46-51, 2008
  • Analysis of Inclusion Core under the Weld Pool of High Strength and Lowalloy Steel, Hidenori Terasaki,Tomonori Yamada,Yu-ichi Komizo, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 48, No. 12, p. 1752-1757, 2008
  • New Techniques for in-situ Microstructure Observation in Welding, Proceeding of 5th International Symposium on Advanced Structural Steels and New Rolling Technologies, Vol. pp.34-43, 2008
  • Morphological Development for Acicular Ferrite in High Strength Pipeline Steel Weld Metal, Proceedings of 7th International Pipeline Conference (IPC2008), Vol. Vol.IPC2008-64677, pp.1-5, 2008
  • Overview of Recent Welding Technology Relating to Pipeline Construction, Trans. JWRI, Vol. Vol.37, No.1, pp.1-5, 2008
  • 放射光を用いた溶接における凝固・変態過程のその場観察の新手法, 鉄と鋼, Vol. Vol.94, No.1, pp.1-5, 2008
  • X線吸収微細構造解析による、溶接プロセス中スピネル酸化物形成過程におけるチタン元素の役割解明に関する研究, SPring-8、2007A期重点産業利用課題成果報告会(2007A1926), 2008
  • Validity of in-situ observations in welding for designing the weld microstructure, Proceedings of the International Conference on Computational & Experimental Engineering and Science (ICCES'08), Vol. pp.1347-1354, 2008
  • In-situ Observation of Phase Transformation for Pure Titanium and TiB Reinforced Titanium, Smart Processing Technology, Vol. Vol.2, pp.227-230, 2008
  • Effects of Oxides on Formation of Intragranular Bainite in Heat Affected Zone in Steels, Smart Processing Technology, Vol. Vol.2, pp.243-246, 2008
  • Effect of Chemical Bonding in Hydroxyapatite Film Formation on Titanium by Aerosol Beam Process, Smart Processing Technology, Vol. Vol.2, pp.247-250, 2008
  • 新版溶接・接合技術入門, 産報出版(株), 2008
  • Effects of small-angle boundary on nucleation of intragranular bainite in steels, Kiyomichi Nakai,Ryo Asakura,Tatsuaki Sakamoto,Sengo Kobayashi,Tomonori Yamada,Hidenori Terasaki,Masahiko Hamada,Yu Ichi Komizo, Proceedings of the 17th IFHTSE Congress, Vol. 2, p. 620-623, 2008
  • Development of titanium weld metal reinforced by titanium mono-boride, Hidenori Terasaki,Yu-ichi Komizo,Keita Saiki,Masahiko Ikeda, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 48, No. 5, p. 624-627, 2008
  • Development of in-situ microstructure observation technique in welding, Welding in the world, Vol. Vol.52, pp.56-63, 2008
  • Grain refinement of titanium weld by heterogeneous nucleation, Hidenori Terasaki,Yu-ichi Komizo,Fumihiro Nishino,Masahiko Ikeda, ADVANCED WELDING AND MICRO JOINING / PACKAGING FOR THE 21ST CENTURY, TRANS TECH PUBLICATIONS LTD, Vol. 580-582, p. 21-+, 2008
  • Comprehensive analysis for microstructure evolution in welding, Hidenori Terasaki,Yu-ichi Komizo,Mitsuharu Yonemura,Takahiro Osuki, ADVANCED WELDING AND MICRO JOINING / PACKAGING FOR THE 21ST CENTURY, TRANS TECH PUBLICATIONS LTD, Vol. 580-582, p. 25-+, 2008
  • 溶接凝固・変態過程のその場観察技術, 溶接学会誌, Vol. Vol.77, No.4, pp.290-295, 2008
  • Observation of nucleation and growth of acicular ferrite in HSLA steel weld-metal, Hidenori Terasaki,Tomonori Yamada,Yu-ichi Komizo, ADVANCED WELDING AND MICRO JOINING / PACKAGING FOR THE 21ST CENTURY, TRANS TECH PUBLICATIONS LTD, Vol. 580-582, p. 33-+, 2008
  • 鉄鋼材料の溶接メタラジー, 溶接工学夏季大学教材, Vol. pp.21-38, 2008
  • Microstructure Development of Ultra-High Strength Steel Weld Metal for Avoiding Hot and Cold Cracking, Yu-ichi Komizo,Hidenori Terasaki, PROCEEDINGS OF THE EIGHTEENTH (2008) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL 4, INTERNATIONAL SOCIETY OFFSHORE& POLAR ENGINEERS, Vol. Vol.4, pp.241-245, p. 241-245, 2008
  • 初晶選択を考慮した熱間工具鋼の凝固割れ感受性評価, 鉄と鋼, Vol. Vol.97, No.9, pp.27-32, 2008
  • Analysis of Inclusion Core under the Weld Pool of High Strength and Lowalloy Steel, Hidenori Terasaki,Tomonori Yamada,Yu-ichi Komizo, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 48, No. 12, p. 1752-1757, 2008
  • New Techniques for in-situ Microstructure Observation in Welding, Proceeding of 5th International Symposium on Advanced Structural Steels and New Rolling Technologies, Vol. pp.34-43, 2008
  • Morphological Development for Acicular Ferrite in High Strength Pipeline Steel Weld Metal, Proceedings of 7th International Pipeline Conference (IPC2008), Vol. Vol.IPC2008-64677, pp.1-5, 2008
  • Overview of Recent Welding Technology Relating to Pipeline Construction, Trans. JWRI, Vol. Vol.37, No.1, pp.1-5, 2008
  • In-situ observation of weld solidification and transformation using synchrotron radiation, Yu-ichi Komizo,Hidenori Terasaki, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 94, No. 1, p. 1-5, 2008
  • Validity of in-situ observations in welding for designing the weld microstructure, Proceedings of the International Conference on Computational & Experimental Engineering and Science (ICCES'08), Vol. pp.1347-1354, 2008
  • Effect of Chemical Bonding in Hydroxyapatite Film Formation on Titanium by Aerosol Beam Process, Smart Processing Technology, Vol. Vol.2, pp.247-250, 2008
  • Effects of Oxides on Formation of Intragranular Bainite in Heat Affected Zone in Steels, Smart Processing Technology, Vol. Vol.2, pp.243-246, 2008
  • Effects of Small-Angle Boundary on Formation of Intragranular Bainite in Bainitic Steels, Smart Processing Technology, Vol. Vol.2, pp.231-234, 2008
  • In-situ Observation of Phase Transformation for Pure Titanium and TiB Reinforced, Smart Processing Technology, Vol. Vol.2, pp.227-230, 2008
  • Development of titanium weld metal reinforced by titanium mono-boride, Hidenori Terasaki,Yu-ichi Komizo,Keita Saiki,Masahiko Ikeda, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 48, No. 5, p. 624-627, 2008
  • Comprehensive analysis for microstructure evolution in welding, Hidenori Terasaki,Yu-ichi Komizo,Mitsuharu Yonemura,Takahiro Osuki, ADVANCED WELDING AND MICRO JOINING / PACKAGING FOR THE 21ST CENTURY, TRANS TECH PUBLICATIONS LTD, Vol. 580-582, p. 25-+, 2008
  • Observation of nucleation and growth of acicular ferrite in HSLA steel weld-metal, Hidenori Terasaki,Tomonori Yamada,Yu-ichi Komizo, ADVANCED WELDING AND MICRO JOINING / PACKAGING FOR THE 21ST CENTURY, TRANS TECH PUBLICATIONS LTD, Vol. 580-582, p. 33-+, 2008
  • In-situ Microstructure Observation Techniques in Welding, J. Jpn. Weld. Soc., Vol. Vol.77, No.4, pp.290-295, 2008
  • Development of in-situ microstructure observation technique in welding, Welding in the world, Vol. Vol.52, pp.56-63, 2008
  • Grain refinement of titanium weld by heterogeneous nucleation, Materials Science Forum, Vol. Vol.580-582, pp.21-24, 2008
  • Microstructure Development of Ultra-High Strength Steel Weld Metal for Avoiding Hot and Cold Cracking, Yu-ichi Komizo,Hidenori Terasaki, PROCEEDINGS OF THE EIGHTEENTH (2008) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL 4, INTERNATIONAL SOCIETY OFFSHORE& POLAR ENGINEERS, Vol. Vol.4, pp.241-245, p. 241-245, 2008
  • Microstructural Evolution in Low Carbon Steel Ti-B Weld Metals with Several Al Levels, YAMADA Tomonori,TERASAKI Hidenori,KOMIZO Yu-ichi, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, JAPAN WELDING SOCIETY, Vol. 25, No. 4, p. 514-518, 2007/12/25
  • Microstructural Evolution in Low Carbon Steel Ti-B Weld Metals with Several Al Levels, YAMADA Tomonori,TERASAKI Hidenori,KOMIZO Yu-ichi, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, JAPAN WELDING SOCIETY, Vol. 25, No. 4, p. 514-518, 2007/12/25
  • ベイナイト鋼における粒内ベイナイト生成および機械的性質に及ぼすMnおよびS添加の効果, 香川義博,神野憲博,仲井清眞,小林千悟,阪本辰顕,濱田昌彦,小溝裕一, 材料とプロセス, Vol. 20, No. 6, 2007/09/01
  • オーステナイト中への変態歪および加工歪導入が及ぼす粒内ベイナイト生成への効果, 朝倉亮,神野憲博,仲井清眞,小林千悟,阪本辰顕,濱田昌彦,小溝裕一, 材料とプロセス, Vol. 20, No. 6, 2007/09/01
  • 粒内ベイナイト形成に及ぼす変態歪および加工歪の効果, 朝倉亮,神野憲博,仲井清眞,小林千悟,阪本辰顕,濱田昌彦,小溝裕一, 材料とプロセス, Vol. 20, No. 3, 2007/03/01
  • Mn,Sの粒内ベイナイト形成および機械的性質に及ぼす効果, 香川義博,神野憲博,仲井清眞,小林千悟,阪本辰顕,濱田昌彦,小溝裕一, 材料とプロセス, Vol. 20, No. 3, 2007/03/01
  • In-situ observation of microstructure formation process of weld metals by time-resolved X-ray diffraction, Mitsuharu Yonemura,Takahiro Osuki,Hidenori Terasaki,Yidehi Komizo,Masugu Sato,Hidenori Toyokawa, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 93, No. 2, p. 138-144, 2007/02
  • 放射光を利用したオーステナイト系ステンレス鋼溶接凝固過程の解析, 溶接学会論文集, Vol. Vol.25, No.1, pp.215-223, 2007
  • 溶接・接合技術データブック, (株)産業技術サービスセンター, 2007
  • Effect of Si on Solidification Process of Hot Work Tool Steel, 第189回溶接冶金研究委員会, Vol. WM-2026-07, 2007
  • Microscopic Observation of Inclusions related to Acicular Ferrite Formation in Steel Weld Metal, YAMADA TOMONORI,TERASAKI HIDENORI,KOMIZO YU-ICHI, Preprints of the National Meeting of JWS, JAPAN WELDING SOCIETY, Vol. 2007, No. 0, p. 117-117, 2007
  • Status & Prospects of Shipbuilding Steel and Its Weldability, Trans. JWRI, Vol. Vol.36, No.1, pp.1-6, 2007
  • Effects of transformation stress and deformation before austenitization on nucleation of intragranular bainite, Kiyomichi Nakai,Norihiro Kanno,Ryo Asakura,Tatsuaki Sakamoto,Sengo Kobayashi,Masahiko Hamada,Yu-ichi Komizo, PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3, TRANS TECH PUBLICATIONS LTD, Vol. 561-565, p. 2053-+, 2007
  • Effect of tip velocity on weld solidification process of hot-work tool steel, Tadafumi Hashimoto,Hidenori Terasaki,Yu-Ichi Komizo, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 25, No. 4, p. 575-580, 2007
  • Influence of martensitic islands on fracture behaviour of high heat-input weld HAZ, Shuichi Suzuki,Takahiro Kamo,Yuichi Komizo, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 25, No. 4, p. 532-536, 2007
  • In-situ observation of nucleation and growth of acicular ferrite in weld metal, Hidenori Terasaki,Tomonori Yamada,Yu-ichi Komizo, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 93, No. 1, p. 27-32, 2007/01
  • Characterization for solidification and phase transformations of pure-titanium steel weld metal with time-resolved x-ray diffraction system, H. Terasaki,Y. I. Komizo,F. Nishino,M. Ikeda, Welding International, Vol. 21, No. 12, p. 844-849, 2007
  • Fine-Grained Titanium by Inclusion-Assisted Microstructure control, Proceedings of the 11th World Conference on Titanium (JIMIC5), Vol. pp.741-744, 2007
  • Direct Observation of Solidification and Morphological Development in Pure Titanium, Proceedings of the 11th World Conference on Titanium (JIMIC5), Vol. pp.231-234, 2007
  • In-situ Observation of Nucleation and Growth of Acicular Ferrite in Weld Metal, TERASAKI Hidenori,YAMADA Tomonori,KOMIZO Yu-ichi, Tetsu-to-Hagane, The Iron and Steel Institute of Japan (ISIJ), Vol. 93, No. 1, p. 27-32, 2007/01/01
  • 時間分解X線回折による溶接金属急冷組織形成過程のin-situ観察, 鉄と鋼, Vol. Vol. 93, pp. 68-74.」, 2007
  • 時分割X 線回折システムによる純チタン溶接金属凝固・固相変態の特性評価, 溶接学会論文集, Vol. 第25 巻 第1号 p. 122-127, 2007
  • Observation of heterogeneous nucleation and growth of acicular ferrite in HSLA steel weld metal, The 1st International symposium on steel science 2007, pp.1-1, p. 1-1, 2007
  • Characterization of Directional Solidification and Morphological Development in Steel Weld Metal, Acta Metallurgica Slovaca, Vol.13, pp.304-309, Vol. 13, p. 304-309, 2007
  • Observation of Nucleation and Growth of Acicular Ferrite in HSLA Steel Weld-metal, International Welding and Joining conference-Korea 2007, pp.475-476, p. 475-476, 2007
  • Comprehensive Analysis for Microstructure Formation in Welding, International Welding and Joining conference-Korea 2007, pp.473-474, p. 473-474, 2007
  • Grain Refinement of Titanium Weld by Heterogeneous Nucleation, International Welding and Joining conference-Korea 2007, pp.471-472, p. 471-472, 2007
  • Development of In-situ Microstructure Observation Technique in Welding, 60th Annual Assembly of Int. Inst. Welding (IIW), p.IIW Doc. IX-2238-07, 2007
  • Analysis of solidification process on austenitic stainless steel weld metal using synchrotron radiation, Quarterly Journal of the Japan Welding Society, Vol. Vol.25, No.1, pp.215-223, 2007
  • Microscopic Observation of Inclusions Related to Acicular Ferrite, Vol. WM-2031-07, 2007
  • Effect of Si on Solidification Process of Hot Work Tool Steel, Vol. WM-2026-07, 2007
  • Status & Prospects of Shipbuilding Steel and Its Weldability, Trans. JWRI, Vol. Vol.36, No.1, pp.1-6, 2007
  • Effects of transformation stress and deformation before austenitization on nucleation of intragranular bainite, Kiyomichi Nakai,Norihiro Kanno,Ryo Asakura,Tatsuaki Sakamoto,Sengo Kobayashi,Masahiko Hamada,Yu-ichi Komizo, PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3, TRANS TECH PUBLICATIONS LTD, Vol. 561-565, p. 2053-+, 2007
  • Influence of martensitic islands on fracture behaviour of high heat-input weld HAZ, Shuichi Suzuki,Takahiro Kamo,Yuichi Komizo, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 25, No. 4, p. 532-536, 2007
  • Effect of tip velocity on weld solidification process of hot-work tool steel, Tadafumi Hashimoto,Hidenori Terasaki,Yu-Ichi Komizo, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 25, No. 4, p. 575-580, 2007
  • Characterization for solidification and phase transformations of pure-titanium steel weld metal with time-resolved x-ray diffraction system, H. Terasaki,Y. I. Komizo,F. Nishino,M. Ikeda, Welding International, Vol. 21, No. 12, p. 844-849, 2007
  • Observation of Heterogeneous Nucleation and Growth of Acicular Ferrite in HSLA Steel Weld Metal, Proc. the 1st International Symposium on Steel Science 2007, Vol. pp.115-118, 2007
  • Direct Observation of Solidification and Morphological Development in Pure Titanium, Proceedings of the 11th World Conference on Titanium (JIMIC5), Vol. pp.231-234, 2007
  • Fine-Grained Titanium by Inclusion-Assisted Microstructure control, Proceedings of the 11th World Conference on Titanium (JIMIC5), Vol. pp.741-744, 2007
  • Characterization for solidification and phase transformations of pure-titanium steel weld metal with time-resolved x-ray diffraction system, H. Terasaki,Y. I. Komizo,F. Nishino,M. Ikeda, Welding International, Vol. 21, No. 12, p. 844-849, 2007
  • Comprehensive Analysis for Microstructure Formation in Welding, International Welding and Joining conference-Korea 2007, pp.473-474, p. 473-474, 2007
  • Characterization of Directional Solidification and Morphological Development in Steel Weld Metal, Acta Metallurgica Slovaca, Vol.13, pp.304-309, Vol. 13, p. 304-309, 2007
  • Observation of heterogeneous nucleation and growth of acicular ferrite in HSLA steel weld metal, The 1st International symposium on steel science 2007, pp.1-1, p. 1-1, 2007
  • Observation of Nucleation and Growth of Acicular Ferrite in HSLA Steel Weld-metal, International Welding and Joining conference-Korea 2007, pp.475-476, p. 475-476, 2007
  • Grain Refinement of Titanium Weld by Heterogeneous Nucleation, International Welding and Joining conference-Korea 2007, pp.471-472, p. 471-472, 2007
  • Development of In-situ Microstructure Observation Technique in Welding, 60th Annual Assembly of Int. Inst. Welding (IIW), p.IIW Doc. IX-2238-07, 2007
  • Development of bainitic steel with high-strength and - Resistance to shock, Kiyomichi Nakai,Sengo Kobayashi,Masahiko Hamada,Yu-ichi Komizo, JOURNAL OF THE JAPAN INSTITUTE OF METALS, JAPAN INST METALS, Vol. 70, No. 11, p. 874-879, 2006/11
  • Microstructure observation of duplex stainless steel joined by friction stir welding, YAMADA Tomonori,KOMIZO Yu-ichi,FUJII Hidetoshi, Vol. 79, p. 56-57, 2006/09/01
  • 溶接溶融凝固過程のインバー合金中NbCの成長過程~放射光による溶接凝固過程のin‐situ観察(第6報)~, 米村光治,小薄孝裕,小溝裕一,寺崎秀紀,佐藤真直,豊川秀訓, 溶接学会全国大会講演概要, No. 79, p. 40-41, 2006/09/01
  • Two-dimensional time-resolved X-ray diffraction study of directional solidification in steels, Mitsuharu Yonemura,Takahiro Osuki,Hidenori Terasaki,Yuichi Komizo,Masugu Sato,Hidenori Toyokawa, MATERIALS TRANSACTIONS, JAPAN INST METALS & MATERIALS, Vol. 47, No. 9, p. 2292-2298, 2006/09
  • Microstructural evolution of acicular ferrite by nano particles, YAMADA Tomonori,KOMIZO Yu-ichi,TERASAKI Hidenori,HAMADA Masahiko, Preprints of the National Meeting of JWS, JAPAN WELDING SOCIETY, Vol. 79, p. 34-35, 2006/09/01
  • In situ observation of morphological development for acicular ferrite in weld metal, H. Terasaki,Y. Komizo, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, MANEY PUBLISHING, Vol. 11, No. 5, p. 561-566, 2006/09
  • Two-dimensional time-resolved X-ray diffraction study of directional solidification in steels, Mitsuharu Yonemura,Takahiro Osuki,Hidenori Terasaki,Yuichi Komizo,Masugu Sato,Hidenori Toyokawa, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 47, No. 9, p. 2292-2298, 2006/09
  • In situ observation of morphological development for acicular ferrite in weld metal, H. Terasaki,Y. Komizo, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, MANEY PUBLISHING, Vol. 11, No. 5, p. 561-566, 2006/09
  • Thermodynamic analysis of inclusion formation for weld microstructure control, YI Komizo,T Nishizawa, INTERNATIONAL JOURNAL OF OFFSHORE AND POLAR ENGINEERING, INT SOC OFFSHORE POLAR ENGINEERS, Vol. 16, No. 2, p. 128-131, 2006/06
  • Thermodynamic analysis of inclusion formation for weld microstructure control, YI Komizo,T Nishizawa, INTERNATIONAL JOURNAL OF OFFSHORE AND POLAR ENGINEERING, INT SOC OFFSHORE POLAR ENGINEERS, Vol. 16, No. 2, p. 128-131, 2006/06
  • Time-resolved in-situ analysis of phase evolution for the directional solidification of carbon steel weld metal, H Terasaki,Y Komizo,M Yonemuira,T Osuki, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, MINERALS METALS MATERIALS SOC, Vol. 37A, No. 4, p. 1261-1266, 2006/04
  • Time-resolved in-situ analysis of phase evolution for the directional solidification of carbon steel weld metal, H Terasaki,Y Komizo,M Yonemuira,T Osuki, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, MINERALS METALS MATERIALS SOC, Vol. 37A, No. 4, p. 1261-1266, 2006/04
  • SおよびMnの小傾角粒界と粒内ベイナイト生成に及ぼす効果, 神野憲博,仲井清真,小林千悟,阪本辰顕,浜田昌彦,小溝裕一, 材料とプロセス, Vol. 19, No. 3, 2006/03/01
  • MnSおよび小傾角粒界による粒内ベイナイト生成促進効果, 神野憲博,仲井清真,小林千悟,阪本辰顕,浜田昌彦,小溝裕一, 材料とプロセス, Vol. 19, No. 3, 2006/03/01
  • Verification of numerical model to predict microstructure of austenitic stainless steel weld metal using synchrotron radiation and trans varestraint testing, T Osuki,M Yonemura,K Ogawa,Y Komizo,H Terasaki, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, TAYLOR & FRANCIS LTD, Vol. 11, No. 1, p. 33-42, 2006/02
  • In-situ observation for weld solidification in stainless steels using time-resolved X-ray diffraction, M Yonemura,T Osuki,H Terasaki,Y Komizo,M Sato,A Kitano, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 47, No. 2, p. 310-316, 2006/02
  • In-situ observation of phase evolution in fusion welding of hypereutectoid carbon steel, Yu-Ichi Komizo,Hidenori Terasaki,Mitsuharu Yonemura,Takahiro Osuki, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 24, No. 1, p. 57-64, 2006/02
  • Verification of numerical model to predict microstructure of austenitic stainless steel weld metal using synchrotron radiation and trans varestraint testing, T Osuki,M Yonemura,K Ogawa,Y Komizo,H Terasaki, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, TAYLOR & FRANCIS LTD, Vol. 11, No. 1, p. 33-42, 2006/02
  • In-situ observation for weld solidification in stainless steels using time-resolved X-ray diffraction, M Yonemura,T Osuki,H Terasaki,Y Komizo,M Sato,A Kitano, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 47, No. 2, p. 310-316, 2006/02
  • Verification of numerical model to predict microstructure of austenitic stainless steel weld metal using synchrotron radiation and trans varestraint testing, T Osuki,M Yonemura,K Ogawa,Y Komizo,H Terasaki, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, TAYLOR & FRANCIS LTD, Vol. 11, No. 1, p. 33-42, 2006/02
  • In-situ observation of phase evolution in fusion welding of hypereutectoid carbon steel, Yu-Ichi Komizo,Hidenori Terasaki,Mitsuharu Yonemura,Takahiro Osuki, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 24, No. 1, p. 57-64, 2006/02
  • In-situ observation for weld solidification in stainless steels using time-resolved X-ray diffraction, M Yonemura,T Osuki,H Terasaki,Y Komizo,M Sato,A Kitano, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 47, No. 2, p. 310-316, 2006/02
  • In-situ observation for weld solidification in stainless steels using time-resolved X-ray diffraction, M Yonemura,T Osuki,H Terasaki,Y Komizo,M Sato,A Kitano, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 47, No. 2, p. 310-316, 2006/02
  • Verification of numerical model to predict microstructure of austenitic stainless steel weld metal using synchrotron radiation and trans varestraint testing, T Osuki,M Yonemura,K Ogawa,Y Komizo,H Terasaki, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, TAYLOR & FRANCIS LTD, Vol. 11, No. 1, p. 33-42, 2006/02
  • In-situ observation of phase evolution in fusion welding of hypereutectoid carbon steel, Yu-Ichi Komizo,Hidenori Terasaki,Mitsuharu Yonemura,Takahiro Osuki, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 24, No. 1, p. 57-64, 2006/02
  • In-situ observation for weld solidification in stainless steels using time-resolved X-ray diffraction, M Yonemura,T Osuki,H Terasaki,Y Komizo,M Sato,A Kitano, MATERIALS TRANSACTIONS, JAPAN INST METALS, Vol. 47, No. 2, p. 310-316, 2006/02
  • 粒内ベイナイト生成に及ぼすS,Mnおよび小傾角粒界の影響, 神野憲博,朝倉亮,香川義博,小林千悟,阪本辰顕,仲井清眞,濱田昌彦,小溝裕一, 日本鉄鋼協会中国四国支部・日本金属学会中国四国支部講演大会講演概要集, Vol. 49th-46th, 2006
  • Growth process of NbC in invar alloy weld metal during welding solidification:in-situ observation of weld solidification process using synchrotron radiation (report 6), Yonemura Mitsuharu,Osuki Takahiro,Terasaki hidenori,Komizo Yuichi,Sato Masugu,Toyokawa Hidenori, Preprints of the National Meeting of JWS, JAPAN WELDING SOCIETY, Vol. 2006, No. 0, p. 19-19, 2006
  • Time resolved in-situ observation of phase evolution in GTA welding of hypereutectoid carbon steel, Smart Processing Technology, Vol. Vol.1, pp.125-128, 2006
  • Development of high strength heavy wall seamless line pipe for deep water applications, , p.CD-ROM, 2006
  • 放射光を用いた溶接凝固・変態過程のその場観察, 2006
  • 溶接凝固・変態過程のin-situ観察, 溶接アーク物理研究委員会 資料, 2006
  • フェライト/オーステナイト相およびNbC晶出を伴うオーステナイト系ステンレス鋼溶接金属凝固割れ感受性の検討, 第183回溶接冶金委員会 資料, 2006
  • Time resolved in-situ observation of phase evolution in GTA welding of hypereutectoid carbon steel, Smart Processing Technology, Vol. Vol. 1, pp. 125-128, 2006
  • 時分解X線回折による溶接金属急冷凝固過程のin-situ観察, Camp ISIJ, Vol. 19,1, 172, 2006
  • In-situ observations for weld solidification and phase transformation in carbon steel, Camp ISIJ, Vol. 19, 1, pp. 173, 2006
  • フェムト秒レーザーを用いた金属材料上への微細構造形成, OPTRONICS, No.4, pp.176-180, No. 4, p. 176-180, 2006
  • Effect of crystallography of bainite-lath on deformation in bainitic steels, Vol. Vol.1(2006), 2006
  • 時分解X 線回折による溶接溶融凝固現象のin-situ観察, 溶接学会全国大会講演概要, 2006
  • 凝固速度を考慮したオーステナイト系ステンレス鋼溶接金属凝固モデルの放射光を利用した検証, 溶接学会全国大会講演概要, 2006
  • 溶融溶接凝固過程におけるデンドライト成長のその場観察, 溶接学会全国大会講演概要, 2006
  • 溶接溶融凝固過程のインバー合金中NbCの結晶成長, 溶接学会全国大会講演概要, 2006
  • Progress in Structural Steels for Bridge and Linepipe, Trans. JWRI, Vol.35, No.1, pp.1-7, Vol. 35, No. 1, p. 1-7, 2006
  • In-situ observation of nucleation site of acicular ferrite in weld metal, Terasaki Hidenori,Yamada Tomonori,Komizo Yu-ichi, Preprints of the National Meeting of JWS, JAPAN WELDING SOCIETY, Vol. 2006, No. 0, p. 17-17, 2006
  • 時分解X線回折による溶接金属急冷凝固過程のin-situ観察, (社)日本鉄鋼協会第152回秋季講演大会, 2006
  • 機械的性質に及ぼす粒内ベイナイトの効果, (社)日本鉄鋼協会第152回秋季講演大会, 2006
  • 溶接中組織変化の"その場観察", 溶接技術, Vol.54, No.9, pp.55-59, Vol. 54, No. 9, p. 55-59, 2006
  • Microstructures on Metal Plate Produced with Femtosecond Laser, Proceedings of 25th International Congress on Applications of Lasers & Electro-Optics, pp.147-150, p. 147-150, 2006
  • Direct Observation of Solidification and Morphological Development in Steel, Proc. Joint Symposium of Korea/Japan Welding Metallurgy Committee, pp.305-308, p. 305-308, 2006
  • In-situ observation of weld solidification and phase transformation process using synchrotron radiation, Materials Science Forum, Vol. Vols. 539-543 (2007) pp. 3820-3825, 2006
  • 高強度および高耐衝撃性を備えたベイナイト鋼の開発, 仲井 清眞,小林 千悟,濱田 昌彦,小溝 裕一, 日本金属学会誌, Vol.70, No.11, pp.874-879, Vol. 70, No. 11, p. 874-879, 2006
  • 時分割X線回折システムによる純チタン溶接金属凝固・固相変態の特徴, 溶接構造シンポジウム講演論文集, Vol. vol. 1, pp. 335-340., 2006
  • 介在物を利用したアシキュラーフェライトの生成挙動, 溶接構造シンポジウム講演論文集, Vol. vol. 1, pp. 345-349., 2006
  • Development of In Situ Observation Technique on Solidification Structure of Weld Metals by X-Ray Diffraction, SPring-8 Research Frontiers 2005 (ISSN 1349-0087), pp.129-130, p. 129-130, 2006
  • 異相界面制御によるチタン粒微細化, 溶接構造シンポジウム講演論文集, Vol. vol1, pp. 341-344, 2006
  • 放射光を利用した低炭素鋼溶接金属一方向凝固過程の特性評価, 溶接構造シンポジウム講演論文集, Vol. vol1, pp. 327-334., 2006
  • Inoculated Technology in Microstructure Control, 2006
  • 放射光を用いた溶接凝固・変態過程のその場観察, 2006
  • 過共析鋼溶融溶接過程における相変態のin-situ観察, 溶接学会論文集, Vol. 24, 1, pp. 57-64/,, 2006
  • 溶接凝固・変態過程のin-situ観察, 溶接アーク物理研究委員会 資料, 2006
  • フェライト/オーステナイト相およびNbC晶出を伴うオーステナイト系ステンレス鋼溶接金属凝固割れ感受性の検討, 第183回溶接冶金委員会 資料, 2006
  • Time resolved in-situ observation of phase evolution in GTA welding of hypereutectoid carbon steel, Smart Processing Technology, Vol. Vol.1, pp.125-128, 2006
  • Development of high strength heavy wall seamless line pipe for deep water applications, , p.CD-ROM, 2006
  • In-situ sychrotron measurement of transformation and solidification upon welding, 2006
  • Microstructures formation on Metal Plate with Femtosecond Laser, OPTRONICS, No.4, pp.176-180, No. 4, p. 176-180, 2006
  • Effect of crystallography of bainite-lath on deformation in bainitic steels, Smart Processing Technology, Vol. Vol.1(2006), 2006
  • Progress in Structural Steels for Bridge and Linepipe, Trans. JWRI, Vol.35, No.1, pp.1-7, Vol. 35, No. 1, p. 1-7, 2006
  • Microstructures on Metal Plate Produced with Femtosecond Laser, Proceedings of 25th International Congress on Applications of Lasers & Electro-Optics, pp.147-150, p. 147-150, 2006
  • Direct Observation of Solidification and Morphological Development in Steel, Proc. Joint Symposium of Korea/Japan Welding Metallurgy Committee, pp.305-308, p. 305-308, 2006
  • Development of In Situ Observation Technique on Solidification Structure of Weld Metals by X-Ray Diffraction, SPring-8 Research Frontiers 2005 (ISSN 1349-0087), pp.129-130, p. 129-130, 2006
  • In-situ observation of weld solidification and phase transformation process using synchrotron radiation, Materials Science Forum, Vol. Vols. 539-543 (2007) pp. 3820-3825, 2006
  • In-situ sychrotron measurement of transformation and solidification upon welding, 2006
  • Effects of crystal orientation relationship between bainite-lath and austenite on deformation behaviors in a bainitic steel, K Nakai,T Megumi,S Kobayashi,M Hamada,Y Komizo, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 91, No. 12, p. 882-887, 2005/12
  • Effects of crystal orientation relationship between bainite-lath and austenite on deformation behaviors in a bainitic steel, K Nakai,T Megumi,S Kobayashi,M Hamada,Y Komizo, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 91, No. 12, p. 882-887, 2005/12
  • 放射光による急冷凝固過程のin‐situ観察 2 放射光による溶接金属急冷凝固過程のin‐situ観察技術の開発, 米村光治,小薄孝裕,小溝裕一,寺崎秀紀,佐藤真直,北野彰子,豊川秀訓,鈴木昌世, 日本金属学会講演概要, Vol. 137th, 2005/09/28
  • Effects of low angle grain boundaries and MnS on the accelerated formation of bainite in a grain., 神野憲博,仲井清真,小林千悟,阪本辰顕,浜田昌彦,小溝裕一, 材料とプロセス, Vol. 18, No. 6, 2005/09/01
  • 306 Development for in-situ observation technique of weld solidification process using synchrotron radiation : in-situ observation of weld solidification process using synchrotron radiation (report 2), Yonemura Mitsuharu,Osuki Takahiro,Komizo Yu-ichi,Terasaki Hidenori,Sato Masugu,Kitano Akiko,Toyokawa Hidenori,Suzuki Masayo, Pre-Prints of the National Meeting of JWS, Japan Welding Society, No. 77, p. 208-209, 2005/08/20
  • Effects of MnS on Formation of Bainite in Steels, KANNO Norihiro, Vol. 18, No. 3, p. 616-616, 2005/03/01
  • Effects of parallelism of slip systems between bainite laths on their deformation behavior, OKUBO Hiroki, Vol. 18, No. 3, p. 488-488, 2005/03/01
  • Development of in-situ observation technique for weld solidification process using synchrotron radiation:In-situ observation of weld solidification process using synchrotron radiation (report 2), Yonemura Mitsuharu,Osuki Takahiro,Terasaki hidenori,Komizo Yuichi,Sato Masugu,Kitano Akiko,Toyokawa Hidenori,Suzuki Masayo, Preprints of the National Meeting of JWS, JAPAN WELDING SOCIETY, Vol. 2005, No. 0, p. 99-99, 2005
  • Spatially resolved in-situ observation of solidification and phase transformation in low-alloy steel welds using synchrotron radiaton, CAMP-ISIJ, Vol. 18 (3) pp. 515, 2005
  • Time resolved in-situ observation of phase evolution in GTA welding of hypereutectoid carbon steel, Int. Symp. Smart Process. Tech., pp.34, 2005
  • In-situ observation of steel weld solidification and phase evolution using synchrotron radiation, Transactions of JWRI, Vol. 34, 2, pp. 51-55, 2005
  • ベイナイトの結晶学的組織制御と機械的性質, まてりあ, Vol. Vol.44, No.12(2005), pp.981, 2005
  • フェムト秒レーザーによる金属材料上への微細構造形成, レーザー学会 第343回研究会報告 21世紀のレーザー技術 , No.RTM-05-53, pp.13-17, No. RTM-05-53, p. 13-17, 2005
  • ベイナイト鋼の変形に及ぼすベイナイトラスとオーステナイトとの結晶方位関係の効果, 鉄と鋼、Vol.91(2005), No.12, pp.882-887, Vol. Vol.91(2005), No.12, pp.882-887, 2005
  • Spatially resolved in-situ observation of solidification and phase transformation in low-alloy steel welds using synchrotron radiaton, CAMP-ISIJ, Vol. 18 (3) pp. 515, 2005
  • Time resolved in-situ observation of phase evolution in GTA welding of hypereutectoid carbon steel, Int. Symp. Smart Process. Tech., pp.34, 2005
  • In-situ observation of steel weld solidification and phase evolution using synchrotron radiation, Transactions of JWRI, Vol. 34, 2, pp. 51-55/,, 2005
  • ベイナイトの結晶学的組織制御と機械的性質, まてりあ, Vol. Vol.44, No.12(2005), pp.981/,, 2005
  • Effects of crystal orientation relationship between bainite-lath and austenite on deformation behaviors in a bainitic steel, Kiyomichi Nakai,Tomohiro Megumi,Sengo Kobayashi,Masahiko Hamada,Yuichi Komizo, Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, Iron and Steel Institute of Japan, Vol. 91, No. 12, p. 882-887, 2005
  • チタンおよびチタン合金の接合(1), チタン, Vol. Vol.53(2005),No2,p.126-130/,, 2005
  • チタンおよびチタン合金の接合(2), チタン, Vol. Vol.53, No.3, pp202-207/,, 2005
  • Spatially resolved in-situ observation of solidification and phase transformation in low-alloy steel welds using synchrotron radiaton, CAMP-ISIJ, Vol. 18 (3) pp. 515, 2005
  • Time resolved in-situ observation of phase evolution in GTA welding of hypereutectoid carbon steel, Int. Symp. Smart Process. Tech., pp.34, 2005
  • Mechanical property and crystallographical control of microstructure in bainitic steel, Materia Japan, Vol. Vol.44, No.12(2005), pp.981, 2005
  • In-situ observation of steel weld solidification and phase evolution using synchrotron radiation, Transactions of JWRI, Vol. 34, 2, pp. 51-55, 2005
  • Microstructures on Metal Plate Produced with Femtosecond Laser, Reports on The 343rd Topical Meeting of The Laser Society of Japan, No.RTM-05-53, pp.13-17, No. RTM-05-53, p. 13-17, 2005
  • Spatially resolved in-situ observation of solidification and phase transformation in low-alloy steel welds using synchrotron radiaton, CAMP-ISIJ, Vol. 18 (3) pp. 515, 2005
  • Time resolved in-situ observation of phase evolution in GTA welding of hypereutectoid carbon steel, Int. Symp. Smart Process. Tech., pp.34, 2005
  • Mechanical property and crystallographical control of microstructure in bainitic steel, Materia Japan, Vol. Vol.44, No.12(2005), pp.981/,, 2005
  • In-situ observation of steel weld solidification and phase evolution using synchrotron radiation, Transactions of JWRI, Vol. 34, 2, pp. 51-55/,, 2005
  • Welding and joining of Titanium and titanium alloys(1), Titanium Japan, Vol. Vol.53(2005),No2,p.126-130/,, 2005
  • Welding and joining of titanium and titanium alloys(2), Titanium Japan, Vol. Vol.53, No.3, pp202-207/,, 2005
  • Early stage of deformation in a bainitic steel, K Nakai,T Megumi,S Kobayashi,M Hamada,Y Komizo, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 90, No. 8, p. 42-48, 2004/08
  • Metallurgical design of ultra high-strength steels for gas pipelines, JY Koo,MJ Luton,NV Bangaru,RA Petkovic,DP Fairchild,CW Petersen,H Asahi,T Hara,Y Terada,M Sugiyama,H Tamehiro,Y Komizo,S Okaguchi,M Hamada,A Yamamoto,Takeuchi, I, INTERNATIONAL JOURNAL OF OFFSHORE AND POLAR ENGINEERING, INT SOC OFFSHORE POLAR ENGINEERS, Vol. 14, No. 1, p. 2-10, 2004/03
  • Metallurgical design of ultra high-strength steels for gas pipelines, JY Koo,MJ Luton,NV Bangaru,RA Petkovic,DP Fairchild,CW Petersen,H Asahi,T Hara,Y Terada,M Sugiyama,H Tamehiro,Y Komizo,S Okaguchi,M Hamada,A Yamamoto,Takeuchi, I, INTERNATIONAL JOURNAL OF OFFSHORE AND POLAR ENGINEERING, INT SOC OFFSHORE POLAR ENGINEERS, Vol. 14, No. 1, p. 2-10, 2004/03
  • Effects of Ti-based oxide inclusions on formation of intragranular ferrite in steels, K Nakai,A Yudate,S Kobayashi,M Hamada,Y Komizo, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 90, No. 3, p. 141-145, 2004/03
  • Hydrogen absorption of high Nb bearing steel, T Omura,T Kushida,K Miyata,YI Komizo, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 90, No. 2, p. 106-112, 2004/02
  • Hydrogen absorption of high Nb bearing steel, Tomohiko Omura,Takahiro Kushida,Kaori Miyata,Yu-Ichi Komizo, Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, Iron and Steel Institute of Japan, Vol. 90, No. 2, p. 106-112, 2004
  • Effects of Ti-based Oxide Inclusions on Formation of Intragranular Ferrite in Steels, Kiyomichi Nakai,Akihiro Yudate,Sengo Kobayashi,Masahiko Hamada,Yuichi Komizo, Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, Iron and Steel Institute of Japan, Vol. 90, No. 3, p. 141-145, 2004
  • Early stage of deformation in a bainitic steel, Kiyomichi Nakai,Tomohiro Megumi,Sengo Kobayashi,Masahiko Hamada,Yuichi Komizo, Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, Iron and Steel Institute of Japan, Vol. 90, No. 8, p. 574-580, 2004
  • Analysis of primary weld solidification in stainless steel using X-ray diffraction with synchrotron radiation, Transaction of JWRI, 2004
  • Effect of boron addition on the toughness and the microstructure of the high strength linepipe seam weld metal, Transaction of JWRI, 2004
  • Analysis of primary weld solidification in stainless steel using X-ray diffraction with synchrotron radiation, Transaction of JWRI, 2004
  • Effect of boron addition on the toughness and the microstructure of the high strength linepipe seam weld metal, Transaction of JWRI, 2004
  • Coarsening kinetics of multicomponent MC-type carbides in high-strength low-alloy steels, K Miyata,T Omura,T Kushida,Y Komizo, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, MINERALS METALS MATERIALS SOC, Vol. 34A, No. 8, p. 1565-1573, 2003/08
  • Coarsening kinetics of multicomponent MC-type carbides in high-strength low-alloy steels, K Miyata,T Omura,T Kushida,Y Komizo, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, MINERALS METALS MATERIALS SOC, Vol. 34A, No. 8, p. 1565-1573, 2003/08
  • New Scopes in Researches on Microstructures for Development of Materials through Electron Microscopy (3), Ikuhara Yuichi,Ohnuki Somei,Kanadani Teruto,Komizo Yu-ichi,Sato Tatsuo,Sugiyama Masaaki,Hirotsu Yoshihiko,Fukushima Hisaaki,Nakai Kiyomichi, Bulletin of the Japan Institute of Metals, The Japan Institute of Metals and Materials, Vol. 42, No. 12, p. 853-853, 2003
  • 耐食性継目無鋼管の現状と展望, ふぇらむ、Vol.8, No7(2003), p.499-505, Vol. Vol.8, No7p.499-505/,, 2003
  • Current Status and Future Prospects of Corrosion-Resistant Seamless Tubes and Pipes, Vol. Vol.8, No7p.499-505/,, 2003
  • Influence of thermal history on surface hot-shortness of Cu-Sn bearing steel, M Hatano,K Kunishige,Y Komizo, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 88, No. 3, p. 36-41, 2002/03
  • 溶接・接合便覧, 溶接学会, 2002
  • Cu,Sn含有鋼の表面赤熱脆化におよぼす熱履歴の影響, 鉄と鋼, 2002
  • 鋼のレーザ、電子ビーム溶接と組織変化, まてりあ、Vol.41, No.4 (2002), p.263-268, Vol. Vol.41, No.4 p.263-268/,, 2002
  • Hardness distribution in weld heat affected zone of boron bearing low carbon steel, Takahiro Kamo,Masahiko Hamada,Yu-Ichi Komizo, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Japan Welding Society, Vol. 20, No. 2, p. 276-281, 2002
  • Development of Ausformed Bainite Steel and Its Welding Joint Properties:, Proc. First International Confernce on Advaced Structural Steels (ICASS 2002) , p.93-94, Vol. p.93-94, 2002
  • Fundamentals of welding Metallurgy in Laser and Electron beam welding of steels, Vol. Vol.41, No.4 p.263-268/,, 2002
  • Hardness distribution in weld heat affected zone of boron bearing low carbon steel, Takahiro Kamo,Masahiko Hamada,Yu-Ichi Komizo, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Japan Welding Society, Vol. 20, No. 2, p. 276-281, 2002
  • Development of Ausformed Bainite Steel and Its Welding Joint Properties:, Proc. First International Confernce on Advaced Structural Steels (ICASS 2002) , p.93-94, Vol. p.93-94, 2002
  • Effect of oxide composition on solidification structure of ti added ferritic stainless steel, H Fujimura,S Tsuge,Y Komizo,T Nishizawa, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 87, No. 11, p. 707-712, 2001/11
  • Corrosion Resistance of Laser Welded Duplex Stainless Steels, OMURA Tomohiko, Vol. 14, No. 2, p. 298-301, 2001/03/01
  • Effect of Boron on Hardenability of Heat Affected Zone in 780MPa Grade High Tensile Strength Steel, KAMO Takahiro, Vol. 14, No. 3, p. 705-705, 2001/03/01
  • 完全オーステナイト系Fe-Cr-Ni合金の溶接高温割れ感受性に及ぼすNi量の影響, 溶接学会論文集, 2001
  • Ti含有フェライト系ステンレス鋼の凝固組織に及ぼす酸化物組成の影響, 鉄と鋼, 2001
  • Niobium in high strength steels for oil country tubular goods, Y Komizo,T Kushida,K Miyata,T Omura, NIOBIUM: SCIENCE & TECHNOLOGY, NIOBIUM 2001 LTD, p. 613-624, 2001
  • チタンおよびチタン合金とその溶接(第4回), 溶接技術, 2001
  • Effect of Ni content on weld hot cracking susceptibility of fully austenitic Fe-Cr-Ni alloy: Investigation on weld hot cracking susceptibility of fully austenitic Fe-Cr-Ni alloy (Report 1), T. Nishibata,H. Hirata,K. Ogawa,Y. Komizo, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Japan Welding Society, Vol. 19, No. 1, p. 77-84, 2001
  • Niobium in high strength steels for oil country tubular goods, Y Komizo,T Kushida,K Miyata,T Omura, NIOBIUM: SCIENCE & TECHNOLOGY, NIOBIUM 2001 LTD, p. 613-624, 2001
  • Welding of Titanium and titanium alloy(No.4), 2001
  • Suppression of surface shot-shortness induced by Cu and /or Sn, KUNISHIGE Kazutoshi, Vol. 13, No. 6, p. 1080-1083, 2000/09/01
  • チタンおよびチタン合金とその溶接(第1回), 溶接技術、Vol.48(2000), No.9, p.138-140, Vol. Vol.48No.9, p.138-140/,, 2000
  • チタンおよびチタン合金とその溶接(第2回), 溶接技術, 2000
  • チタンおよびチタン合金とその溶接(第3回), 溶接技術、Vol.48(2000), No.11, p.138-140, Vol. Vol.48No.11, p.138-140/,, 2000
  • Welding of titanium and titanium alloy(No.1), Vol. Vol.48No.9, p.138-140/,, 2000
  • Welding of titanium and titanium alloy, 2000
  • Welding of titanium and titanium alloy(No.3), Vol. Vol.48No.11, p.138-140/,, 2000
  • Nitrogen distribution on rapid solidification in LASER welded duplex stainless steels, Tomohiko Omura,Takahiro Kushida,Yuichi Komizo, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Japan Welding Soc, Vol. 17, No. 3, p. 448-455, 1999
  • 接合・溶接技術Q&A1000, 産業技術サービスセンター, 1999
  • Weldability of Super 13 Cr Martensitic Stainless Steel, Proc. Supermartensitic Stainless Steel 99 (1999), p.214-220, Vol. 99 p.214-220, 1999
  • Super 13 Cr martensitic stainless steel pipe produced by high power laser welding, Y Komizo, METAL WELDING AND APPLICATIONS, CANADIAN INST MINING, METALLURGY AND PETROLEUM, Vol. p.267-277, p. 267-277, 1999
  • Nitrogen distribution on rapid solidification in LASER welded duplex stainless steels, Tomohiko Omura,Takahiro Kushida,Yuichi Komizo, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Japan Welding Soc, Vol. 17, No. 3, p. 448-455, 1999
  • Weldability of Super 13 Cr Martensitic Stainless Steel, Proc. Supermartensitic Stainless Steel 99 (1999), p.214-220, Vol. 99 p.214-220, 1999
  • Super 13 Cr Martensitic Stainless Steel Pipe produced by High Power Laser Welding:, Proc. Metal Welding and Applications (1999) , p.267-277, Vol. p.267-277, 1999
  • Interface migration and diffusion behavior on bonding interface of dissimilar materials, Yu-Ichi Komizo,Kazuhiro Ogawa, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Japan Welding Society, Vol. 15, No. 3, p. 425-431, 1997
  • Effect of chemical compositions on weldability of stainless steel tubes for high-purity gas supply system, H Hirata,S Azuma,Y Komizo,H Teranishi, INSTITUTE OF ENVIRONMENTAL SCIENCES, 1997 PROCEEDINGS - CONTAMINATION CONTROL, INST ENVIRONMENTAL SCIENCES, Vol. p.273-278, p. 273-278, 1997
  • Interface migration and diffusion behavior on bonding interface of dissimilar materials, Yu-Ichi Komizo,Kazuhiro Ogawa, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Japan Welding Society, Vol. 15, No. 3, p. 425-431, 1997
  • Effect of chemical compositions on weldability of stainless steel tubes for high-purity gas supply system, H Hirata,S Azuma,Y Komizo,H Teranishi, INSTITUTE OF ENVIRONMENTAL SCIENCES, 1997 PROCEEDINGS - CONTAMINATION CONTROL, INST ENVIRONMENTAL SCIENCES, Vol. p.273-278, p. 273-278, 1997
  • 異種金属の圧延接合界面組織と諸特性に関する研究, 圧力技術、Vol.34(1996), No.1, p.17-24, Vol. Vol.34No.1, p.17-24/,, 1996
  • Precipitation Behavior in Weld Metal of Super Duplex Stainless Steel, IIW Doc.Ⅸ-1836-96 (1996), 1996
  • Study on interface microstructure and mechanical properties of roll-bonding for dissimilar mateials, Vol. Vol.34No.1, p.17-24/,, 1996
  • Precipitation Behavior in Weld Metal of Super Duplex Stainless Steel, IIW Doc.Ⅸ-1836-96 (1996), 1996
  • MICROSTRUCTURE AND PRECIPITATION BEHAVIOR IN HEAT-AFFECTED ZONE OF C-MN MICROALLOYED STEEL CONTAINING NB, V AND TI, M HAMADA,Y FUKADA,Y KOMIZO, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 35, No. 10, p. 1196-1202, 1995
  • MICROSTRUCTURE AND PRECIPITATION BEHAVIOR IN HEAT-AFFECTED ZONE OF C-MN MICROALLOYED STEEL CONTAINING NB, V AND TI, M HAMADA,Y FUKADA,Y KOMIZO, ISIJ INTERNATIONAL, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 35, No. 10, p. 1196-1202, 1995
  • Effect of Al content on critical CTOD properties in heat affected zones of C-Mn microalloyed steel, Y. Fukada,Y. Komizo, Welding International, Vol. 7, No. 4, p. 286-291, 1993/01/01
  • Effect of Al content on critical CTOD properties in heat affected zones of C-Mn microalloyed steel, Y. Fukada,Y. Komizo, Welding International, Vol. 7, No. 4, p. 286-291, 1993/01/01
  • Effect of Ni and N on Mechanical and Corrosion Properties in High Cr and Mo Duplex Stainless Steel Weldment, Trans.JWS, Vol.23(1992), No.1, p.40-45, Vol. Vol.23No.1, p.40-45/,, 1992
  • Study on Critical CTOD Property in Heat Affected Zone of C-Mn Microalloyed Steel, Trans. JWS, Vol.23(1992), No.2, p.65-72, Vol. Vol.23No.2, p.65-72/,, 1992
  • 材料別接合技術データハンドブック, サイエンスフォーラム, 1992
  • Effect of Ni and N on Mechanical and Corrosion Properties in High Cr and Mo Duplex Stainless Steel Weldment, Trans.JWS, Vol.23(1992), No.1, p.40-45, Vol. Vol.23No.1, p.40-45/,, 1992
  • Study on Critical CTOD Property in Heat Affected Zone of C-Mn Microalloyed Steel, Trans. JWS, Vol.23(1992), No.2, p.65-72, Vol. Vol.23No.2, p.65-72/,, 1992
  • Data hand book for welding and joining technology, scienceforum, 1992
  • Study on Welding of High Silicon Containing Stainless Steels (II) HAZ Toughness of High Silicon Containing Duplex Stainless Steel, Kazuhiro Ogawa,Minoru Miura,Yu-Ich Komizo, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 9, No. 2, p. 269-275, 1991
  • High Speed 'Amorphous' Welding of Steel Pipes, Welding International, Vol.5 (1991), No.10, p.776-779, Vol. Vol.5 No.10, p.776-779/,, 1991
  • Study on Welding of High Silicon Containing Stainless Steels (II) HAZ Toughness of High Silicon Containing Duplex Stainless Steel, Kazuhiro Ogawa,Minoru Miura,Yu-Ich Komizo, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 9, No. 2, p. 269-275, 1991
  • High Speed 'Amorphous' Welding of Steel Pipes, Welding International, Vol.5 (1991), No.10, p.776-779, Vol. Vol.5 No.10, p.776-779/,, 1991
  • Diffusion bonding of stainless steel pipes by using Fe-base and Ni-base interlayer alloys, Yu-ichi Komizo,Fumio Kashimoto,Toshiro Tomita,Kazuhiro Ogawa, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 8, No. 2, p. 197-204, 1990
  • HAZ embrittlement mechanism in high Cr, mo duplex stainless steel and effects of Ni, N on it, Yuichi Komizo,Kazuhiro Ogawa,Shigeki Azuma, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 8, No. 2, p. 242-249, 1990
  • Study on structure at solid state bonding interface and its controlling. (1). Hard layer formation at bonding interface of steel/nickel in clad steel, Yuich Komizo,Kazuhiro Ogawa, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 8, No. 3, p. 377-383, 1990
  • Diffusion bonding of stainless steel pipes by using Fe-base and Ni-base interlayer alloys, Yu-ichi Komizo,Fumio Kashimoto,Toshiro Tomita,Kazuhiro Ogawa, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 8, No. 2, p. 197-204, 1990
  • HAZ embrittlement mechanism in high Cr, mo duplex stainless steel and effects of Ni, N on it, Yuichi Komizo,Kazuhiro Ogawa,Shigeki Azuma, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 8, No. 2, p. 242-249, 1990
  • Study on structure at solid state bonding interface and its controlling. (1). Hard layer formation at bonding interface of steel/nickel in clad steel, Yuich Komizo,Kazuhiro Ogawa, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 8, No. 3, p. 377-383, 1990
  • 溶接部の環境劣化対策技術の進歩, 西山記念技術講座, 1989
  • Environmental problems and their countermeasures in welded construction, Nishiyama memorial lecture, 1989
  • BONDING CHARACTERISTICS AND INTERFACE REACTIONS IN CLADDING OF TITANIUM TO CARBON-STEEL, Y KOMIZO,J MURAYAMA,H OHTANI, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 74, No. 9, p. 1832-1838, 1988/09
  • PRINCIPLES OF SUPERPLASTIC DIFFUSION BONDING, Y MAEHARA,Y KOMIZO,TG LANGDON, MATERIALS SCIENCE AND TECHNOLOGY, INST MATERIALS, Vol. 4, No. 8, p. 669-674, 1988/08
  • SOLID-STATE BONDING OF SUPERPLASTIC DELTA/GAMMA DUPLEX STAINLESS-STEELS WITH SIMILAR AND DISSIMILAR FERROUS MATERIALS, Y KOMIZO,Y MAEHARA, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 74, No. 8, p. 1657-1664, 1988/08
  • PRINCIPLES OF SUPERPLASTIC DIFFUSION BONDING, Y MAEHARA,Y KOMIZO,TG LANGDON, MATERIALS SCIENCE AND TECHNOLOGY, INST MATERIALS, Vol. 4, No. 8, p. 669-674, 1988/08
  • CTOD properties and m-a constituent in the HAZ of c-mn microalloyed steel, Yu-ich Komizo,Yasuto Fukada, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 6, No. 1, p. 41-46, 1988
  • Solid State Diffusion Bonding Using Superplasticity of δ/γ Duplex Stainless Steel, Trans. JWS, Vol.19(1988), No.2, p.83-91, Vol. Vol.19No.2, p.83-91/,, 1988
  • 二相ステンレス鋼の超塑性現象を利用した固相接合, 鉄と鋼、Vol.74(1988), No.8, p.1657-1664, Vol. Vol.74No.8, p.1657-1664/,, 1988
  • Tiと炭素鋼の接合性と界面反応, 鉄と鋼、Vol.74(1988), No.9, p.1832-1838, Vol. Vol.74No.9, p.1832-1838/,, 1988
  • Carbon equivalent, hardness and cracking tendency relationships in C-Mn microalloyed structural steels, Joining & Materials, October 1988, p.179-183, Vol. p.179-183, 1988
  • CTOD properties and m-a constituent in the HAZ of c-mn microalloyed steel, Yu-ich Komizo,Yasuto Fukada, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 6, No. 1, p. 41-46, 1988
  • Solid State Diffusion Bonding Using Superplasticity of δ/γ Duplex Stainless Steel, Trans. JWS, Vol.19(1988), No.2, p.83-91, Vol. Vol.19No.2, p.83-91/,, 1988
  • Carbon equivalent, hardness and cracking tendency relationships in C-Mn microalloyed structural steels, Joining & Materials, October 1988, p.179-183, Vol. p.179-183, 1988
  • 低炭素低合金鋼溶接熱影響部の靭性と島状マルテンサイト, 小溝 裕一,深田 康人, 水曜会誌, 京都大学工学部水曜会, Vol. 20, No. 9, p. p621-629, 1987/12
  • Crack susceptibility of steel plates produced by the thermo-mechanical control process, Yu-Ichi Komizo, Welding International, Vol. 1, No. 1, p. 26-32, 1987/01/01
  • PRODUCTION OF HEAVY-WALL, HIGH-STRENGTH SAW BENT-PIPE FOR ARCTIC USE, H SAKAMOTO,H NAKATE,K YOSHIMURA,Y KOMIZO,T SAWAMURA, TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 27, No. 4, p. 291-298, 1987
  • Crack Susceptibility of Steel Plates produced by Thermo-Mechanical Control Process, Welding International, Vol.1(1987), No.1, p.26-32, Vol. Vol.1No.1, p.26-32/,, 1987
  • PRODUCTION OF HEAVY-WALL, HIGH-STRENGTH SAW BENT-PIPE FOR ARCTIC USE, H SAKAMOTO,H NAKATE,K YOSHIMURA,Y KOMIZO,T SAWAMURA, TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 27, No. 4, p. 291-298, 1987
  • SUPERPLASTIC DIFFUSION BONDING, Y KOMIZO, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 72, No. 13, p. 1628-1628, 1986/09
  • DEVELOPMENT OF ROLLED TITANIUM CLAD STEEL .2. ROLLING CONDITION AND BONDING STRENGTH, Y KOMIZO, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 72, No. 13, p. 1654-1654, 1986/09
  • MECHANICAL-PROPERTIES OF TEMPER-FREE HIGH-STRENGTH BENT PIPE FOR ARCTIC USE, J KONDO, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 72, No. 13, p. 1539-1539, 1986/09
  • MECHANICAL-PROPERTIES AND CORROSION-RESISTANCE OF DUPLEX STAINLESS-STEEL WELDMENT, YI KOMIZO, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 72, No. 5, p. S601-S601, 1986/03
  • Study on the Critical CTOD Values in the Heat Affected Zone of C-Mn Microalloyed Steel, Mutsuo Nakanishi,Yuichi Komizo,Yasuto Fukada, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 4, No. 2, p. 447-452, 1986
  • Effect of Process Parameters on Centreline Solidification in EB Welds, Metal Construction, Vol.18(1986), No.2, p.104R-111R, Vol. Vol.18No.2, p.104R-111R/,, 1986
  • WELDABILITY OF LOW C-NB-TI-B STEEL FOR LINE PIPE, M NAKANISHI,T HASHIMOTO,Y KOMIZO,M AKASAKA, TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 26, No. 5, p. 367-372, 1986
  • Study on the Critical CTOD Values in the Heat Affected Zone of C-Mn Microalloyed Steel, Mutsuo Nakanishi,Yuichi Komizo,Yasuto Fukada, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 4, No. 2, p. 447-452, 1986
  • Effect of Process Parameters on Centreline Solidification in EB Welds, Metal Construction, Vol.18(1986), No.2, p.104R-111R, Vol. Vol.18No.2, p.104R-111R/,, 1986
  • HIGH-STRENGTH HOT-BENT PIPE FOR ARCTIC USE, T HASHIMOTO,Y KOMIZO,T SAWAMURA,H NAKADE,Y NAKATSUKA, TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 26, No. 5, p. 418-424, 1986
  • WELDABILITY OF LOW C-NB-TI-B STEEL FOR LINE PIPE, M NAKANISHI,T HASHIMOTO,Y KOMIZO,M AKASAKA, TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 26, No. 5, p. 367-372, 1986
  • 溶接金属の組織形態と靭性, 中西 睦夫,小溝 裕一, 住友金属, 住友金属工業, Vol. 37, No. 3, p. p333-341, 1985/08
  • WELDABILITY OF LOW-CARBON B-TREATED LINE PIPE STEEL, Y KOMIZO, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, IRON STEEL INST JAPAN KEIDANREN KAIKAN, Vol. 71, No. 5, p. S667-S667, 1985
  • Effect of Ti Treatment on Low Nitrogen Content Steel, Mutsuo Nakanishi,Yuichi Komizo,Ichiro Seta, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 2, No. 1, p. 33-39, 1984
  • Effect of Ti Treatment on Low Nitrogen Content Steel, Mutsuo Nakanishi,Yuichi Komizo,Ichiro Seta, QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 2, No. 1, p. 33-39, 1984
  • Improvement of Welded HAZ Toughness by Dispersion with Nitride Particles and Oxide Particles, Mutsuo Nakanishi,Yu-Ichi Komizo,Ichiro Seta, JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 52, No. 2, p. 117-124, 1983
  • Improvement of Toughness of High Strength Steel Weld Metal, Mutsuo Nakanishi,Nono Katsumoto,Yuichi Komizo,Masaaki Tanaka, JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 52, No. 2, p. 125-131, 1983
  • Improvement of Welded HAZ Toughness by Dispersion with Nitride Particles and Oxide Particles, Mutsuo Nakanishi,Yu-Ichi Komizo,Ichiro Seta, JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 52, No. 2, p. 117-124, 1983
  • Improvement of Toughness of High Strength Steel Weld Metal, Mutsuo Nakanishi,Nono Katsumoto,Yuichi Komizo,Masaaki Tanaka, JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 52, No. 2, p. 125-131, 1983
  • Study on Microstructure and Toughness of the Weld Metal (2 nd Report): Morphology and Transformation Behavior of Low Carbon Low Alloy Steel Weld Metals, Yoshinori Ito,Mutuo Nakanishi,Yu-ichi Komizo, JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 51, No. 2, p. 111-118, 1982
  • Hardenability of the Weld Metal Compared with Rolled Steel Plate —Study on Microtructure and Toughness of the Weld Metal (3rd Report)—, Yoshinori Ito,Mutsuo Nakan-shi,Yuichi Komizo, JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 51, No. 4, p. 354-359, 1982
  • Effect of Oxygen on Low Carbon Steel Weld Metal, Metal Construction, Vol.14(1982), No.9, p.472-478, Vol. Vol.14No.9, p.472-478/,, 1982
  • Study on Microstructure and Toughness of the Weld Metal (2 nd Report): Morphology and Transformation Behavior of Low Carbon Low Alloy Steel Weld Metals, Yoshinori Ito,Mutuo Nakanishi,Yu-ichi Komizo, JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 51, No. 2, p. 111-118, 1982
  • Hardenability of the Weld Metal Compared with Rolled Steel Plate —Study on Microtructure and Toughness of the Weld Metal (3rd Report)—, Yoshinori Ito,Mutsuo Nakan-shi,Yuichi Komizo, JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 51, No. 4, p. 354-359, 1982
  • Effect of Oxygen on Low Carbon Steel Weld Metal, Metal Construction, Vol.14(1982), No.9, p.472-478, Vol. Vol.14No.9, p.472-478/,, 1982
  • Effect of Oxygen on Transformation of Low Carbon Weld Metal —Study on Microstructure and Toughness of the Weld Metal (1st Report)—, Yoshinori Ito,Mutsuo Nakanishi,Yuichi Komizo, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 50, No. 12, p. 1211-1218, 1981
  • Effect of Oxygen on Transformation of Low Carbon Weld Metal —Study on Microstructure and Toughness of the Weld Metal (1st Report)—, Yoshinori Ito,Mutsuo Nakanishi,Yuichi Komizo, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 50, No. 12, p. 1211-1218, 1981
  • 極厚鋼板の溶接金属横割れ防止について, 圧力技術、Vol.17(1979), No.1, p.20, Vol. Vol.17No.1, p.20/,, 1979
  • Prevention of transverse cracking in weld metal of thick steel plate, Vol. Vol.17No.1, p.20/,, 1979
  • 溶接金属のCOD特性と組織の関係について, 溶接学会誌、Vol.47(1978), No.9, p.650-656, Vol. Vol.47No.9, p.650-656/,, 1978
  • Crack opening displacement properties on submerged arc weld metals, Journal of the japan welding society,Vol.47(1978), No.9, p.650-656, Vol. Vol.47No.9, p.650-656/,, 1978
  • 板厚方向の溶接割れ感受性に関する研究, 溶接学会誌、Vol.46(1977), No.2, p.62-67, Vol. Vol.46No.2, p.62-67/,, 1977
  • Study on weld cracking susceptibility in the through-thickness direction, Journal of the japan welding society,Vol.46(1977), No.2, p.62-67, Vol. Vol.46No.2, p.62-67/,, 1977
  • インプラントテストによるラメラテァの研究, 圧力技術、Vol.14(1976), No.6, p.30, Vol. Vol.14No.6, p.30/,, 1976
  • Study on lamellar tearing by implant test method, Vol. Vol.14No.6, p.30/,, 1976

Publications

  • 金属加工学, 小溝裕一 細井宏一, 産報出版, 2019/08
  • Handbook of Iron and Steel, 5th Edition, Vol. 3, Y. Komizo, Institute of Steel and Iron of Japan, ISBN:9784930980823, 2014/08
  • In-situ Studies with Photons, Neutrons and Electrons Scattering II, T. Kannengiesser,S.S. Babu,Y. Komizo,A.J. Ramirez, Springer, ISBN:9783319061443, 2014/07
  • 平成18年度溶接工学夏季大学教材「鉄鋼材料の溶接メタラジー」, (社)溶接学会, 2006
  • ハーバードで教えるR & D戦略, 日本生産性本部, 1994

Industrial Property Rights

  • チタン溶接接合体

Awards

  • 紫綬褒章, 内閣府, 2017/11
  • フェロー, 日本工学会, 2013/05
  • フェロー, 溶接学会, 2010/04
  • 平成21年度 日本熱処理技術協会賞 論文賞, 2010
  • 2009年度技術賞, 2009
  • 平成21年度科学技術分野の文部科学大臣表彰 科学技術賞, 2009
  • 技術賞・粉生記念賞, 2009
  • The 8th International Welding Symposium (8WS), Best Poster Kobe Steel Award, 2008
  • 日本鉄鋼協会 俵論文賞, 2008
  • The 8th International Welding Symposium (8WS), Best Poster Kobe Steel Award, 2008
  • 日本金属学会論文賞, 2007
  • 溶接学会論文賞, 2007
  • 日本鉄鋼協会論文賞(ギマラエス賞), 2005
  • 溶接学術振興賞, 2005
  • Gimaraes Award, 2005
  • 溶接学会佐々木賞, 2004
  • ISOPE Best Paper Award, 2004
  • SASAKI Award of Japan Welding Society, 2004
  • ISOPE Best Paper Award, 2004

Committee Memberships

  • 日本溶接協会, 理事, 2020/05 - Present
  • 日本熱処理技術協会, 理事, 2011/04 - 2017/03
  • 日本溶接会議, 理事, 2008/06 - 2016/05
  • 日本工学会, 理事, 2011/04 - 2014/03
  • 熱処理技術協会, 幹事, 2005 -
  • 溶接学会, 理事, 2004 -
  • 日本鉄鋼協会, 接合結合フォーラム座長, 2004 -
  • 日本チタン協会, 溶接分科会主査, 2004 -