JA

Profile

Research

Social

Other

Naitou Makio

内藤 牧男

Joining and Welding Research Institute, Professor

keyword Powder Technology

Education

  • 1984/04 - 1987/03, Nagoya University, Graduate School of Engineering, Chemical Engineering
  • 1976/04 - 1980/03, Nagoya University, School of Engineering

Research Areas

  • Manufacturing technology (mechanical, electrical/electronic, chemical engineering), Transfer phenomena and unit operations, Powder Processing
  • Nanotechnology/Materials, Metals and resources production, Powder Technology
  • Environmental science/Agricultural science, Environmental materials/recycling technology, Smart Processing Technology

Professional Memberships

  • Smart Processing Society for Materials, Environment & Energy
  • アメリカセラミックス学会
  • 化学工学会
  • 日本セラミックス協会
  • 粉体工学会

Papers

  • Low temperature synthesis of Ga-doped Li7La3Zr2O12 garnet-type solid electrolyte by mechanical method, Kazuaki Kanai,Shinji Ozawa,Takahiro Kozawa,Makio Naito, Advanced Powder Technology, 2021/09
  • 湿式粉砕過程における砕料粒子径の予測法とソフトウェアKIK-DEM, 石原 真吾、久志本 築、加納 純也、近藤 光、小澤 隆弘、内藤 牧男, 粉体技術, Vol. 13, No. 9, p. 683-689, 2021/09
  • 粉砕技術の最近の動向と今後の展開―湿式微粉砕技術を中心に, 内藤 牧男、小澤 隆弘、近藤 光, 粉体技術, Vol. 13, No. 9, p. 676-682, 2021/09
  • Rapid synthesis of YAG phosphor by facile mechanical method, Akira Kondo,Takahiro Kozawa,Toshihiro Ishikawa,Makio Naito, International Journal of Applied Ceramic Technology, 2021/08
  • Solution-Based Approach for the Continuous Fabrication of Thin Lithium-Ion Battery Electrodes by Wet Mechanochemical Synthesis and Electrophoretic Deposition, Takahiro Kozawa,Chenning Zhang,Tetsuo Uchikoshi,Kayo Fukuyama,Akira Kondo,Makio Naito, Advanced Engineering Materials, Vol. 23, 2021/08
  • Development of graphene aerogels with high strength and ultrahigh adsorption capacity for gas purification, Jingjing Li,Xiaoguang Li,Xiaoying Zhang,Jingxian Zhang,Yusen Duan,Xingbang Li,Dongliang Jiang,Takahiro Kozawa,Makio Naito, Materials & Design, Vol. 208, 2021/06
  • Sintering of degradable bone substitutes at room temperature, Heng-Yi Lin,Yan-Kai Huang,Pei-Yi Hsu,Wei-Hsing Tuan,Makio Naito, Ceramics International, 2021/05
  • 持続可能な社会を支えるナノ粒子、微粒子プロセスの新展開, 内藤 牧男、小澤 隆弘、近藤 光, 化学装置, Vol. 63, No. 5, p. 17-24, 2021/05
  • Magnetorheological Fluids with Surface-Modified Iron Oxide Magnetic Particles with Controlled Size and Shape, Chen Shen,Yasufumi Oda,Masaki Matsubara,Jun Yabuki,Shinya Yamanaka,Hiroya Abe,Makio Naito,Atsushi Muramatsu,Kiyoshi Kanie, ACS Applied Materials & Interfaces, Vol. 13, p. 20581-20588, 2021/04
  • A new process for creating a solid-phase sintered body using a unique densification process between powders, Toshihiro Ishikawa,Makio Naito, International Journal of Ceramic Engineering & Science, Vol. 2021;00:, p. 1-7, 2021/03
  • 国際粉体工業展に見る粉体技術の最近の動向, 内藤 牧男, 化学装置, Vol. 63, No. 3, p. 25-31, 2021/03
  • Effect of ball collision direction on a wet mechanochemical reaction, Takahiro Kozawa,Kayo Fukuyama,Kizuku Kushimoto,Shingo Ishihara,Junya Kano,Akira Kondo,Makio Naito, Scientific Reports, Vol. 11, 2021/03
  • Wet Milling Synthesis of NH4CoPO4·H2O Platelets: Formation Reaction, Growth Mechanism, and Conversion into High-Voltage LiCoPO4 Cathode for Li-Ion Batteries, Takahiro Kozawa,Kayo Fukuyama,Akira Kondo,Makio Naito, Materials Research Bulletin, Vol. 135, 2021/03
  • Smart Mechanical Powder Processing for Producing Carbon Nanotube Reinforced Aluminum Matrix Composites, Behzad Sadeghi,Genlian Fan,Zhanqiu Tan,Zhiqiang Li,Akira Kondo,Makio Naito, KONA Powder and Particle Journal, No. 38, p. 1-11, 2021/02
  • アルミナ粒子断熱材の熱的および機械的特性におよぼす温度履歴の影響, 田坂 太一、大村 高弘、萩原 伸治、近藤 光、内藤 牧男, 粉体工学会誌, Vol. 57, p. 612-618, 2020/12
  • 不均一温度場における高温下での熱伝導率測定, 大村 高弘、石井 健登、田坂 太一、近藤 光、内藤 牧男, 熱物性, Vol. 34, No. 4, p. 137-146, 2020/12
  • 機能性粉体の作製技術とその応用, 内藤 牧男、小澤 隆弘、近藤 光, 工業材料, Vol. 68, No. 12, p. 14-19, 2020/12
  • 親水性ナノ粒子を用いたバイオフィルムの形成抑制, 田中 智彦,藤澤 瑛梨,吉原 章仙,小西 康裕,野村 俊之,近藤 光,内藤 牧男, 粉体工学会誌, Vol. 57, p. 588-592, 2020/11
  • 材料開発の鍵を握る粉体プロセスの開発とその応用, 内藤 牧男,小澤 隆弘,近藤 光, 化学装置, Vol. 62, No. 11, p. 17-26, 2020/11
  • 新型コロナウイルスCOVID-19のエアロゾル感染の可能性―微粒子工学の立場からの考察, 向阪 保雄、野村 俊之、内藤 牧男, 粉体工学会誌, Vol. 57, p. 526-529, 2020/10
  • Strengthening bioceramic through an approach of powder processing, Hao-Yu Chang,Ying-Cen Chen,Pei-Yi Hsu,Wei-Hsing Tuan,Akira Kondo,Takahiro Kozawa,Makio Naito, Advanced Powder Technology, Vol. 31, No. 10, p. 4180-4186, 2020/09
  • 粒子ボンディング技術を用いた機能性粒子の設計とその応用, 内藤 牧男、小澤 隆弘、近藤 光, PHARM TECH JAPAN, Vol. 36, p. 1811-1818, 2020/08
  • 造粒体及び成形体特性評価法の基礎, 内藤 牧男,近藤 光, 化学装置, Vol. 62, No. 8, p. 59-64, 2020/08
  • 遊星ボールミルによる液中粉砕結果とDEMシミュレーションにより算出した衝突エネルギー分布との関係, 近藤 光、石原 真吾、久志本 築、小澤 隆弘、加納 純也、内藤 牧男, 粉体工学会誌, Vol. 57, p. 176-183, 2020/04
  • Fabrication of an LiMn2O4@LiMnPO4 composite cathode for improved cycling performance at high temperatures, Takahiro Kozawa,Toshiya Harata,Makio Naito, Journal of Asian Ceramic Societies, Vol. 8, p. 309-317, 2020/03
  • Controlled swelling behavior and stable cycling of silicon/graphite granular composite for high energy density in lithium ion batteries, Dongsoo Lee,Akira Kondo,Seungwoo Lee,Seungcheol Myeong,Seho Sun,Insung Hwang,Taeseup Song,Makio Naito,Ungyu Paik, Journal of Power Sources, Vol. 457, 2020/03
  • Synthesis of Geopolymers from Mechanically Activated Coal Fly Ash and Improvement of Their Mechanical Properties, Mitsuaki Matsuoka,Kaho Yokoyama,Kohei Okura,Norihiro Murayama,Masato Ueda,Makio Naito, Minerals, Vol. 9, No. 12, 2019/12
  • Correlation between grinding results in a tumbling ball mill with liquid media and the distribution of ball impact energy calculated by DEM simulation, Akira Kondo,Shingo Ishihara,Kizuku Kushimoto,Takahiro Kozawa,Junya Kano,Makio Naito, J. Soc. Powder Technol. Jpn., Vol. 56, p. 608-614, 2019/11
  • 「ものづくり」における粉体特性評価の重要性, 内藤 牧男, 化学装置, Vol. 61, No. 10, p. 18-23, 2019/10
  • 白色LED用蛍光体の非加熱合成技術の開発, 内藤 牧男,金井 和章, 化学装置, Vol. 61, No. 9, p. 17-20, 2019/09
  • 機能性粉体の作り方と使い方 - 複合粒子を例として -, 内藤 牧男, 粉体技術, Vol. 11, No. 8, p. 643-649, 2019/08
  • Tailoring and characterization of carbon nanotube dispersity in CNT/6061Al composites, Malin Chen,Genlian Fan,Zhanqiu Tan,Chao Yuan,Dingbang Xiong,Qiang Guo,Yishi Su,Makio Naito,Zhiqiang Li, Materials Science & Engineering A, Vol. 757, p. 172-181, 2019/05
  • Manipulation of the degradation behavior of calcium sulfate by the addition of bioglass, Pei-Yi Hsu,Hsio-Chun Kuo,Wei-Hsing Tuan,Shao-Ju Shih,Makio Naito,Po-Liang Lai, Progress in Biomaterials, Vol. 8, No. 2, p. 115-125, 2019/05
  • 研究室紹介, 内藤 牧男, 粉体技術, Vol. 11, No. 4, p. 58-59, 2019/04
  • Surface modification of Li1.3Al0.3Ti1.7(PO4)3 ceramic electrolyte by Al2O3-doped ZnO coating to enable dendrites-free all-solid-state lithium-metal batteries, Hainan Bai,Jiulin Hu,Yusen Duan,Takahiro Kozawa,Makio Naito,Jingxian Zhang,Shaoming Dong, Ceramics International, Vol. 45, No. 12, p. 14663-14668, 2019/04
  • Wet mechanical route to synthesize morphology-controlled NH4MnPO4?H2O and its conversion reaction into LiMnPO4, Takahiro Kozawa,Kayo Fukuyama,Akira Kondo,Makio Naito, ACS Omega, Vol. 4, p. 5690-5695, 2019/03
  • Correlation between Grinding Results in a Tumbling Ball Mill with Liquid Media and the Analysis of Ball Motion Using DEM Simulation, Akira Kondo,Shnigo Ishihara,Kizuku Kushimoto,Takahiro Kozawa,Junya Kano,Makio Naito, J. Soc. Powder Technol. Jpn., Vol. 56, No. 3, p. 148-155, 2019/03
  • Evaluation of YAG:Ce3+ Phosphor Properties Synthesized by Mechanical Method, Kazuaki Kanai,Yoshifumi Fukui,Shinji Ozawa,Akira Kondo,Takahiro Kozawa,Makio Nait, J. Soc. Powder Technol. Jpn., Vol. 56, No. 3, p. 142-147, 2019/03
  • Thermal Diffusivity Measurement for Thermal Insulator Composite Materials with Silica Nanoparticles/Glass Fiber by the Laser Flash Method, Megumi Akoshima,Haruka Abe,Tseng-Wen Lian,Akira Kondo,Makio Naito, J. Soc. Powder Technol. Jpn., Vol. 56, No. 3, p. 123-129, 2019/03
  • Bulk-type all-solid-state batteries with mechanically prepared LiCoPO4 composite cathodes, Takahiro Kozawa,Akira Kondo,Kayo Fukuyama,Makio Naito,Hideyuki Koga,Yusuke Shimo,Toshiya Saito,Hideki Iba,Yasushi Inda,Tomomi Oono,Takashi Katoh,Kousuke Nakajima, Journal of Solid State Electrochemistry, Vol. 23, No. 4, p. 1297-1302, 2019/02
  • Development of Simple Method to Measure Thermal Conductivity of Thermal Insulations, Takahiro Ohmura,Taichi Tasaka,Kento Ishii,Taiga Tsuji,Mizuho Minamide,Ryo Hayasaka,Akira Kondo,Makio Naito, J. Soc. Powder Technol. Jpn., Vol. 56, No. 2, p. 74-80, 2019/02
  • 次世代電池材料の研究開発に貢献する粉体プロセスの新展開, 内藤 牧男,小澤 隆弘,近藤 光, 化学装置, Vol. 61, No. 1, p. 47-53, 2019/01
  • Mechano-chemical synthesis of ammonia and acetic acid from inorganic materials in water, Koichi Kugimiya,Takahiro Kozawa,Takashi Harada,Makio Naito, Green Processing and Synthesis, Vol. 8, No. 1, p. 223-229, 2018/09
  • ADEM Simulation for the Analysis of Breakage Behavior of Powder Compact, Shingo Ishihara1,Kizuku Kushimoto,Junya Kano,Makio Naito, J. Soc. Powder Technol. Jpn., Vol. 55, No. 9, p. 492-498, 2018/09
  • Low-temperature synthesis of LiNi0.5Mn1.5O4 grains using a water vapor-assisted solid-state reaction, Takahiro Kozawa,Daiki Hirobe,Kunika Uehara,Makio Naito, Journal of Solid State Chemistry, Academic Press Inc., Vol. 263, p. 94-99, 2018/07/01
  • Effect of mechanical processing on thermal and mechanical properties of fibrous fumed alumina compacts, Tseng-Wen Lian,Akira Kondo,Takahiro Kozawa,Takahiro Omura,Wei-Hsing Tuan,Makio Naito, Journal of Asian Ceramic Societies, Vol. 6, No. 2, p. 156-161, 2018/05
  • Influence of LiBO2 addition on the microstructure and lithium-ion conductivity of Li1+xAlxTi2−x(PO4)3(x = 0.3) ceramic electrolyte, Hainan Bai,Jiulin Hu,Xiaoguang Li,Yusen Duan,Feng Shao,Takahiro Kozaw,Makio Naito,Jingxian Zhang, Ceramics International, Elsevier Ltd, Vol. 44, No. 11, 2018/04/15
  • [総論]粒子複合化の基礎と実際, 内藤 牧男, 化学装置, Vol. 60, No. 5, p. 42-47, 2018/04
  • Adhesion control of fungal spores on solid surfaces using hydrophilic nanoparticles, Toshiyuki Nomura,Mana Minamiura,Kazuto Fukamachi,Shohei Yumiyama,Akira Kondo,Makio Naito, Advanced Powder Technology, Elsevier B.V., Vol. 29, No. 4, p. 909-914, 2018/04/01
  • Design of an efficient flake powder metallurgy route to fabricate CNT/6061Al composites, Malin Chen,Genlian Fan,Zhanqiu Tan,Dingbang Xiong,Qiang Guo,Yishi Su,Jie Zhang,Zhiqiang Li,Makio Naito,Zhang Di, Materials and Design, Elsevier Ltd, Vol. 142, p. 288-296, 2018/03/15
  • Scalable synthesis of Sr3Al2(OH)12 hydrogarnet by wet milling and its thermal decomposition behavior, Takahiro Kozawa,Yoshikazu Suzuki,Makio Naito, Materials Chemistry and Physics, Vol. 212, p. 245-254, 2018/03
  • Effect of flux powder addition on the synthesis of YAG phosphor by mechanical method, Kazuaki Kanai,Yoshifumi Fukui,Takahiro Kozawa,Akira Kondo,Makio Naito, Advanced Powder Technology, Elsevier B.V., Vol. 29, No. 3, p. 457-461, 2018/03/01
  • Influence of LiBO2 addition on the microstructure and lithium-ion conductivity of Li1+xAlxTi2-x(PO4)3(x = 0.3) ceramic electrolyte, Hainan Bai,Jiulin Hu,Xiaoguang Li,Yusen Duan,Feng Shao,Takahiro Kozawa,Makio Naito,Jingxian Zhang, Ceramics International, Vol. 6, No. 44, p. 6558-6563, 2018/01
  • Effect of moisture on the thermal conductivity of hydrophilic fumed silica thermal insulation compact, Takahiro Ohmura,Tseng-Wen Lian,Akira Kondo,Ryo Hayasaka,Yukihiro Goto,Testuo Fujimoto,Makio Naito, Journal of the Society of Powder Technology, Japan, Society of Powder Technology, Vol. 55, No. 3, p. 153-157, 2018
  • Specific heat capacity measurement for porous composite material with glass fiber/fumed silica nanoparticles, Haruka Abe,Megumi Akoshima,Tseng-Wen Lian,Akira Kondo,Makio Naito, Journal of the Society of Powder Technology, Japan, Society of Powder Technology, Vol. 55, No. 3, p. 147-152, 2018
  • Grain refinement and superplastic behavior of carbon nanotube reinforced aluminum alloy composite processed by cold rolling, Genlian Fan,Haiyue Huang,Zhanqiu Tan,Dingbang Xiong,Qiang Guo,Makio Naito,Zhiqiang Li,Di Zhang, Materials Science and Engineering A, Elsevier Ltd, Vol. 708, No. 21, p. 537-543, 2017/12/21
  • Measurement Method of Thermal Conductivity in Ununiformed Temperature Field, T.Ohmura,T.-W. Lian,A.kondo,R.Hayasaka,M.Naito, Netsu Bussei, Vol. 31, No. 4, p. 166-173, 2017/11
  • ナノマテリアルのスマートな製造技術, 内藤 牧男,小澤 隆弘,近藤 光, 化学装置, Vol. 59, No. 9, p. 17-20, 2017/09
  • Mechanochemical-hydrothermal synthesis of layered lithium titanate hydrate nanotubes at room temperature and their conversion to Li4Ti5O12, Shinji Suzuki,Takahiro Kozawa,Takeshi Murakami,Makio Naito, Materials Research Bulletin, Elsevier Ltd, Vol. 90, p. 218-223, 2017/06/01
  • Effect of hydrophobic nano-silica on the thermal insulation of fibrous silica compacts, Tseng-Wen Lian,Akira Kondo,Takahiro Kozawa,Megumi Akoshima,Haruka Abe,Takahiro Ohmura,Wei-Hsing Tuan,Makio Naito, Journal of Asian Ceramic Societies, Elsevier B.V., Vol. 5, No. 2, p. 118-122, 2017/06/01
  • [総論]初歩から学ぶ粉砕技術―基礎から応用まで, 内藤 牧男, 化学装置, Vol. 59, No. 6, p. 44-50, 2017/04
  • Effect of carbon addition on one-step mechanical synthesis of LiCoPO4/C composite granules and their powder characteristics, Mitsuaki Matsuoka,Akira Kondo,Takahiro Kozawa,Makio Naito,Hideyuki Koga,Toshiya Saito,Hideki Iba, Ceramics International, Elsevier Ltd, Vol. 43, No. 1, p. 938-943, 2017/01/01
  • The synthesis of YAG:Ce3+ phosphor by mechanical method, Kazuaki Kanai,Yoshifumi Fukui,Takahiro Kozawa,Akira Kondo,Makio Naito, Journal of the Society of Powder Technology, Japan, Society of Powder Technology, Vol. 54, No. 1, p. 32-36, 2017
  • Effect of BaF2 powder addition on the synthesis of YAG phosphor by mechanical method, Kazuaki Kanai,Yoshifumi Fukui,Takahiro Kozawa,Akira Kondo,Makio Naito, Advanced Powder Technology, Elsevier B.V., Vol. 28, No. 1, p. 50-54, 2017/01/01
  • Mechanical synthesis of LiNi0.5Mn1.5O4 cathode powders by using composite precursor particles, T. Kozawa,H. Tarui,M. Naito, J. Soc. Powder Technol. Jpn., Vol. 53, No. 12, p. 774-778, 2016/12
  • Growth behavior of LiMn2O4 particles formed by solid-state reactions in air and water vapor, Takahiro Kozawa,Kazumichi Yanagisawa,Takeshi Murakami,Makio Naito, Journal of Solid State Chemistry, Academic Press Inc., Vol. 243, p. 241-246, 2016/11/01
  • 例題で理解する「粉体の基礎」入門、粉体の流動性評価, 内藤 牧男, 化学装置, Vol. 58, No. 11, p. 115-117, 2016/11
  • Mechanical Synthesis and Formation Mechanism of LiNi0.5Mn1.5O4 Granules Consisting of Nanoparticles, T. Kozawa,H. Tarui,M. Naito, J. Soc. Powder Technol. Jpn., Vol. 53, No. 10, p. 636-641, 2016/10
  • 複合粒子の合成と微粒子成膜への応用, 内藤 牧男,近藤 光,小澤 隆弘, ケミカルエンジニヤリング, Vol. 61, No. 10, p. 734-739, 2016/10
  • CIP成形体中の顆粒の崩壊確率の定式化, 安田 公一、田中 諭、内藤 牧男, 日本機械学会2016年度年次大会講演論文集, 2016/09
  • Insertion of lattice strains into ordered LiNi0.5Mn1.5O4 spinel by mechanical stress: A comparison of perfect versus imperfect structures as a cathode for Li-ion batteries, Takahiro Kozawa,Takeshi Murakami,Makio Naito, Journal of Power Sources, Elsevier B.V., Vol. 320, p. 120-126, 2016/07/15
  • 例題で理解する「粉体の基礎」入門、粉体の特性―粉体粒子間の相互作用, 内藤 牧男, 化学装置, Vol. 58, No. 7, p. 45-48, 2016/07
  • 機械的手法によるリチウムイオン電池用正極粒子の合成, 小澤 隆弘,近藤 光,内藤 牧男, セラミックス, Vol. 51, No. 6, p. 377-380, 2016/06
  • SOFC Cathode Prepared from Composite Particles and its Properties, A. Kondo,C.-Y. Hsu,T. Kozawa,M. Naito, J. Soc. Powder Technol. Jpn., Vol. 53, No. 6, p. 380-385, 2016/06
  • Mechanically induced formation of metastable χ- And κ-Al2O3 from boehmite, Takahiro Kozawa,Makio Naito, Advanced Powder Technology, Elsevier B.V., Vol. 27, No. 3, p. 935-939, 2016/05/01
  • Low temperature synthesis of YAG:Ce3+ phosphor by mechanical method, Kazuaki Kanai,Yoshifumi Fukui,Takahiro Kozawa,Akira Kondo,Makio Naito, Advanced Powder Technology, Elsevier B.V., Vol. 27, No. 3, p. 886-890, 2016/05/01
  • Preparation of LiCoO2/Li1.3Al0.3Ti1.7(PO4)3 composite cathode granule for all-solid-state lithium-ion batteries by simple mechanical method, Eri Nakamura,Akira Kondo,Mitsuaki Matsuoka,Takahiro Kozawa,Makio Naito,Hideyuki Koga,Hideki Iba, Advanced Powder Technology, Elsevier B.V., Vol. 27, No. 3, p. 825-829, 2016/05/01
  • 粉体技術の国際動向, 内藤 牧男, 化学装置, Vol. 58, No. 5, p. 17-19, 2016/05
  • Stochastic analysis on ceramic granule collapse in powder compact during cold isostatic pressing, Kouichi Yasuda,Satoshi Tanaka,Makio Naito, Advanced Powder Technology, Elsevier B.V., Vol. 27, No. 3, p. 940-947, 2016/05/01
  • Effect of co-doping NiO and Nb2O5 on phase stability and mechanical properties of Y2O3-stabilized ZrO2/Al2O3 composites, Pei-Chia Chen,Chiao-Wei Cheng,I-Cheng Kao,Wei-Hsing Tuan,Tseng-Wen Lian,Makio Naito, Advanced Powder Technology, Elsevier B.V., Vol. 27, No. 3, p. 877-881, 2016/05/01
  • Rapid thermal conductivity measurement of porous thermal insulation material by laser flash method, Tseng-Wen Lian,Akira Kondo,Megumi Akoshima,Haruka Abe,Takahiro Ohmura,Wei-Hsing Tuan,Makio Naito, Advanced Powder Technology, Elsevier B.V., Vol. 27, No. 3, p. 882-885, 2016/05/01
  • LSCF-GDC composite particles for solid oxide fuel cells cathodes prepared by facile mechanical method, Xiuan Xi,Akira Kondo,Takahiro Kozawa,Makio Naito, Advanced Powder Technology, Elsevier B.V., Vol. 27, No. 2, p. 646-651, 2016/03/01
  • Preparation and characterization of Ni-YSZ composite electrode for solid oxide fuel cells by different co-precipitation routes, Xiuan Xi,Akira Kondo,Makio Naito, Journal of Alloys and Compounds, Elsevier Ltd, Vol. 688, p. 1047-1052, 2016
  • Electrostatic Spray Deposition of Composite Particles for Li-ion Batteries, ABE Hiroya,KONDO Akira,NAITO Makio,YAMAGUCHI Masayuki, Trans. JWRI, Vol. 44, No. 2, p. 9-12, 2015/12
  • CIP成形体中の顆粒の崩壊過程のモデリング, 安田 公一,田中 諭,内藤 牧男, 日本機械学会第23回機械材料・材料加工技術講演会(M&P2015)論文集, 2015/11
  • Effect of Heating Temperature on the Battery Performances of LiCoO2 Granules Synthesized by Mechanical Method, Eri Nakamura,Akira Kondo,Mitsuaki Matsuoka,Takahiro Kozawa,Makio Naito,Hideyuki Koga,Hideki Iba, J. Soc. Powder Technol. Jpn., Vol. 52, No. 11, p. 634-640, 2015/11
  • Effect of fumed silica properties on the thermal insulation performance of fibrous compact, Tseng-Wen Lian,Akira Kondo,Takahiro Kozawa,Takahiro Ohmura,Wei-Hsing Tuan,Makio Naito, Ceramics International, Elsevier Ltd, Vol. 41, No. 8, p. 9966-9971, 2015/09/01
  • SOFC Cathode Prepared by Heat Processing of Composite Granules and its Properties, Akira Kondo,Eri Nakamura,Takahiro Kozawa,Makio Naito, J. Soc. Powder Technol. Jpn., Vol. 52, No. 6, p. 319-324, 2015/06
  • ナノ粒子の加工技術と応用展開, 内藤 牧男, 工業材料, Vol. 63, No. 6, p. 74-78, 2015/06
  • 粒子複合化プロセスの開発とその応用展開, 内藤 牧男,近藤 光,小澤 隆弘, 化学装置, Vol. 57, No. 5, p. 17-24, 2015/05
  • A simple mechanical process to synthesize La0.6Sr0.4Co0.2Fe0.8O3 perovskite for solid oxide fuel cells cathode, Xiuan Xi,Akira Kondo,Makio Naito, Materials Letters, Elsevier, Vol. 145, p. 212-215, 2015/04/15
  • Facile preparation of porous LiFePO4/C composite granules by mechanical process, Takahiro Kozawa,Noriaki Kataoka,Akira Kondo,Eri Nakamura,Hiroya Abe,Makio Naito, Materials Chemistry and Physics, Elsevier Ltd, Vol. 155, p. 246-251, 2015/04/01
  • Spark plasma sintering of tungsten/graphite joints with a SiC ceramic interlayer, Tomoyuki Okuni,Yoshinari Miyamoto,Hiroya Abe,Makio Naito, Ceramics International, Elsevier Ltd, Vol. 41, No. 3, p. 4651-4655, 2015/04/01
  • Facile preparation of core@shell and concentration-gradient spinel particles for Li-ion battery cathode materials, Takahiro Kozawa,Makio Naito, Science and Technology of Advanced Materials, Institute of Physics Publishing, Vol. 16, No. 1, 2015
  • Effect of Oleic Acid Addition on Crystallinity of Mesoporous Calcium Carbonate, YAMANAKA Shinya,OISO Takahiro,KUGA Yoshikazu,ABE Hiroya,NAITO Makio, Trans. JWRI, Vol. 43, No. 2, p. 45-47, 2014/12
  • 材料開発を支える粉体技術の最新動向, 内藤 牧男、近藤 光、小澤 隆弘, 工業材料, Vol. 62, No. 12, p. 18-22, 2014/12
  • One-step mechanical synthesis of LiFePO4/C composite granule under ambient atmosphere, Takahiro Kozawa,Noriaki Kataoka,Akira Kondo,Eri Nakamura,Hiroya Abe,Makio Naito, Ceramics International, Elsevier Ltd, Vol. 40, p. 16127-16131, 2014/12/01
  • Effect of composition on microstructure and polarization resistance of solid oxide fuel cell anode Ni-YSZ composites made by co-precipitation, Xiuan Xi,Hiroya Abe,Makio Naito, Ceramics International, Elsevier Ltd, Vol. 40, p. 16549-16555, 2014/12/01
  • Rapid synthesis of LiNi0.5Mn1.5O4 by mechanical process and post-annealing, Takahiro Kozawa,Akira Kondo,Eri Nakamura,Hiroya Abe,Makio Naito,Hideyuki Koga,Shinji Nakanishi,Hideki Iba, Materials Letters, Elsevier, Vol. 132, p. 218-220, 2014/10/01
  • コロイドゲルのダイレクトインクライティング, 阿部 浩也、近藤 光、内藤 牧男, セラミックス, Vol. 49, No. 10, p. 871-874, 2014/09
  • One-step mechanical processing to prepare LSM/ScSZ composite particles for SOFC cathode, Kouhei Hosokawa,Akira Kondo,Masataro Okumiya,Hiroya Abe,Makio Naito, Advanced Powder Technology, Elsevier, Vol. 25, No. 5, p. 1430-1434, 2014/09/01
  • Evaluation of Particles Released from Single-wall Carbon Nanotube/Polymer Composites with or without Thermal Aging by an Accelerated Abrasion Test, Lin Jiang,Akira Kondo,Masahiro Shigeta,Shigehisa Endoh,Mitsugu Uejima,Isamu Ogura,Makio Naito, Journal of Occupational and Environmental Hygiene, Vol. 11, p. 1-7, 2014/06
  • 粉体技術の基盤構築とイノベーションへの展開, 内藤 牧男、近藤 光, 化学装置, Vol. 56, No. 5, p. 22-30, 2014/05
  • 粉体流動性の評価と制御, 内藤 牧男、阿部 浩也、近藤 光, セラミックス, Vol. 49, No. 4, p. 290-295, 2014/04
  • 材料開発における粉体構造制御の役割, 内藤 牧男、阿部 浩也、近藤 光、小澤 隆弘, 粉体工学会誌, Vol. 51, No. 3, p. 174-184, 2014/03
  • Elastic Analysis on Homogenization Process in Ceramic Powder Compact during Repeated Cold Isostatic Pressing by Multiple Shell Model, Kouichi Yasuda,Satoshi Tanaka,Makio Naito, J. Soc. Powder Technol. Jpn., Vol. 51, No. 3, p. 153-162, 2014/03
  • One-pot Mechanical Synthesis of LiCoO2 from Li2O Powder, Eri Nakamura,Akira Kondo,Takahiro Kozawa,Hiroya Abe,Makio Naito,Jun Yoshida,Shinji Nakanishi,Hideki Iba, J. Soc. Powder Technol. Jpn., Vol. 51, No. 3, p. 131-135, 2014/03
  • Synthesis and processing of graphene hydrogels for electronics applications, Zhenquan Tan,Satoshi Ohara,Hiroya Abe,Makio Naito, RSC Advances, Royal Society of Chemistry, Vol. 4, No. 17, p. 8874-8878, 2014
  • Effect of silicon carbide particle size and CaO content on foaming properties during firing and microstructure of porcelain ceramics, Xiuan Xi,Linfeng Xu,Anze Shui,Yanmin Wang,Makio Naito, Ceramics International, Elsevier Ltd, Vol. 40, No. 8, p. 12931-12938, 2014
  • One-pot mechanical synthesis of the nanocomposite granule of LiCoO2 nanoparticles, Akira Kondo,Eri Nakamura,Takahiro Kozawa,Hiroya Abe,Makio Naito,Jun Yoshida,Shinji Nakanishi,Hideki Iba, Advanced Powder Technology, Elsevier B.V., Vol. 25, No. 4, p. 1280-1284, 2014
  • 微粒子接合による高性能断熱材料の開発と材料リサイクルへの展開, 近藤 光、阿部 浩也、内藤 牧男, スマートプロセス学会誌, Vol. 3, No. 1, p. 30-34, 2014/01
  • Synthesis of La0.8Sr0.2MnO3 Fine Particles by Mechanical Method, Kouhei Hosokawa,Akira Kondo,Masataro Okumiya,Hiroya Abe,Makio Naito, J. Soc. Powder Technol. Jpn., Vol. 51, No. 1, p. 4-9, 2014/01
  • Joining of AlN and graphite disks using interlayer tapes by spark plasma sintering, Tomoyuki Okuni,Yoshinari Miyamoto,Hiroya Abe,Makio Naito, Materials and Design, Elsevier Ltd, Vol. 54, p. 755-759, 2014
  • Novel Co-precipitation method to synthesize NiO-YSZ nanocomposite powder for solid oxide fuel cell, Xiuan Xi,Hiroya Abe,Kazuo Kuruma,Ryo Harada,Anze Shui,Makio Naito, Advanced Powder Technology, Elsevier, Vol. 25, No. 2, p. 490-494, 2014
  • Joining of silicon carbide and graphite by spark plasma sintering, Tomoyuki Okuni,Yoshinari Miyamoto,Hiroya Abe,Makio Naito, Ceramics International, Vol. 40, No. 1, p. 1359-1363, 2014/01
  • Two-step Surface Modification of Iron Particles for Magnetorheological Fluid, YAMANAKA Shinya,ABE Hiroya,NAITO Makio, Trans. JWRI, Vol. 42, No. 2, p. 29-31, 2013/12
  • Synthesis of WO3?0.33H2O Nanoneedles by Hydrothermal Treatment of Ion-Exchanged Precursor, Mohamed Elnouby,Kazuo Kuruma,Eri Nakamura,Hiroya Abe,Yoshikazu Suzuki,Makio Naito, Journal of Flux Growth, Vol. 8, No. 2, p. 62-65, 2013/12
  • 微粒子接合による複合多孔構造の制御とその応用, 内藤 牧男、阿部 浩也、近藤 光、小澤 隆弘, 粉体および粉末冶金, Vol. 60, No. 12, p. 516-522, 2013/12
  • 粉体技術の動向と今後の展開, 内藤 牧男, 化学装置, Vol. 55, No. 10, p. 55-59, 2013/10
  • モノづくりを支える粉体技術の最新動向, 内藤 牧男, 工業材料, Vol. 61, No. 10, p. 18-21, 2013/10
  • Thermal behavior of delithiated Li1-xMnPO4 (0 ≤ x <1) structure for lithium-ion batteries, Jun Yoshida,Shinji Nakanishi,Hideki Iba,Hiroya Abe,Makio Naito, International Journal of Applied Ceramic Technology, Vol. 10, No. 5, p. 764-772, 2013/09
  • One-step mechanical synthesis of the nanocomposite granule of LiMnPO 4 nanoparticles and carbon, Jun Yoshida,Shinji Nakanishi,Hideki Iba,Akira Kondo,Hiroya Abe,Makio Naito, Advanced Powder Technology, Vol. 24, No. 5, p. 829-832, 2013/09
  • Effects of Mechanical Processing Conditions on the Synthesis of Oxide Nano-particles, Kouhe Hosokawa,Akira Kondo,Masataro Okumiya,Hiroya Abe,Makio Naito, J. Soc. Powder Technol. Jpn., Vol. 50, No. 8, p. 561-566, 2013/08
  • 次世代の粉体技術に向けて, 内藤 牧男、阿部 浩也、近藤 光, 粉体技術, Vol. 5, No. 7, p. 609-614, 2013/07
  • 非加熱ワンポットプロセスによる多孔質複合粒子の作製とその応用, 内藤 牧男、阿部 浩也、近藤 光, ケミカルエンジニヤリング, Vol. 58, No. 6, p. 414-418, 2013/06
  • アークプラズマ法による微粒子合成と機能性流体への応用, 阿部 浩也、山中 真也、田中 学、内藤 牧男, 日本接着学会誌, Vol. 49, No. 5, p. 177-182, 2013/05
  • 材料開発を支える粉体技術の最新動向, 内藤 牧男、阿部 浩也、近藤 光, 化学装置, Vol. 55, No. 5, p. 17-24, 2013/05
  • Analysis of the size effect of LiMnPO4 particles on the battery properties by using STEM-EELS, J. Yoshida,M. Stark,J. Holzbock,N. Hüsing,S. Nakanishi,H. Iba,H. Abe,M. Naito, Journal of Power Sources, Vol. 226, p. 122-126, 2013/03/15
  • 粒子複合化による省エネルギー・省資源へのアプローチ, 内藤 牧男、阿部 浩也、近藤 光, 未来材料, Vol. 13, No. 3, p. 27-33, 2013/03
  • Facile synthesis of WO3·H2O square nanoplates via a mild aging of ion-exchanged precursor, Mohamed Elnouby,Kazuo Kuruma,Eri Nakamura,Hiroya Abe,Yoshikazu Suzuki,Makio Naito, Journal of the Ceramic Society of Japan, Ceramic Society of Japan, Vol. 121, No. 1418, p. 907-911, 2013
  • Direct bonding of AlN and graphite by spark plasma sintering, Tomoyuki Okuni,Yoshinari Miyamoto,Hiroya Abe,Makio Naito, Journal of the Ceramic Society of Japan, Ceramic Society of Japan, Vol. 121, No. 1413, p. 448-451, 2013
  • ナノ粒子複合化による高性能断熱材の開発, 阿部 浩也、内藤 牧男, セラミック, Vol. 47, No. 12, p. 920-923, 2012/12
  • Colloidal dispersibility of fatty acid-capped iron nanoparticles and its effect on static and dynamic magnetorheological response, Shinya Yamanaka,Hiroya Abe,Makio Naito,Toshiyuki Fujimoto,Yoshikazau Kuga, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 415, p. 239-246, 2012/12
  • Development of Recycling Process for Waste FRP Mortar Pipe, Akira Kondo,Takahiro Ohmura,Hiroya Abe,Junya Kano,Makio Naito, J. Soc. Powder Technol. Jpn., Vol. 49, No. 11, p. 827-831, 2012/11
  • Synthesis of ceramic bonded carbon using SiC-coated carbon particles and spark plasma sintering, Masaharu Nakamura,Tetsuro Tojo,Makio Naito,Yoshinari Miyamoto, International Journal of Applied Ceramic Technology, Vol. 9, No. 6, p. 1076-1084, 2012/11
  • 難処理複合廃材の新規リサイクル技術, 内藤 牧男、阿部 浩也、近藤 光, 強化プラスチックス, Vol. 56, No. 10, p. 320-324, 2012/10
  • Synthesis Process of the Lanthanum Manganite Powders by Mechanical Method, Akira Kondo,Kouhe Hosokawa,Eri Nakamura,Masataro Okumiya,Hiroya Abe,Makio Naito, J. Soc. Powder Technol. Jpn., Vol. 49, No. 10, p. 745-749, 2012/10
  • Mechanically assisted deposition of nikel oxide-ytttria stabilized zirconia nanocomposite film and its microstructural evolution for solid oxide fuel cells anode application, Hiroya Abe,Makio Naito,Kazuyoshi Sato, International Journal of Applied Ceramic Technology, Vol. 9, No. 5, p. 928-935, 2012/09
  • 複合粒子を用いた固体酸 化物燃料電池の電極構造制御, 阿部 浩也、近藤 光、内藤 牧男, スマートプロセス学会誌, Vol. 1, No. 5, p. 213-217, 2012/09
  • DEM Simulation of the Powder Composite Process by a Mechanical Method, Rikio SODA,Keisuke YAGI,Junya KANO,Fumio SAITO,Makio NAITO, Journal of Smart Processing, Vol. 1, No. 5, p. 218-223, 2012/09
  • ナノパーティクルテクノロジーの動向, 内藤 牧男、阿部 浩也, 配管技術, Vol. 54, No. 11, p. 1-5, 2012/09
  • Effects of magnesium oxychloride and silicon carbide additives on the foaming property during firing for porcelain ceramics and their microstructure, Xiuan Xi,Anze Shui,Yunfeng Li,Yanmin Wang,Hiroya Abe,Makio Naito, Journal of the European Ceramic Society, Vol. 32, No. 12, p. 3035-3041, 2012/09
  • Evaluation of Composite Cathode Materials for Solid Oxide Fuel Cells Made by Using High Rotation Shearing Mixer, Natsuro Hobara,Akifusa Hagiwara,Akira Kondo,Hiroya Abe,Makio Naito, J. Soc. Powder Technol. Jpn., Vol. 49, No. 8, p. 594-598, 2012/08
  • Directed assembly of metal oxide nanoparticles by DNA, Jinghua Han,Satoshi Ohara,Kazuyoshi Sato,Hui Xu,Zhenquan Tan,Yoshiaki Morisada,Kazuo Kuruma,Makio Naito,Ping Shan,Mitsuo Umetsu, Materials Letters, Vol. 79, p. 78-80, 2012/07/15
  • Filament Formation in Biological Carbon Nanotube Suspensions, ABE Hiroya,TAN Zhenquan,KONDO Akira,NAITO Makio, Trans. JWRI, Vol. 41, No. 1, p. 29-32, 2012/06
  • Development of Advanced Composite Materials and Novel Material Recycling by Particle Bonding Technology, Makio Naito,Hiroya Abe,Akira Kondo, Proceedings of the 16 th International Conference, Modern Technologies, Quality and Innovation, Vol. 2, p. 641-644, 2012/05
  • 新材料開発のキーテクノロジー“最先端粉体技術”, 内藤 牧男、阿部 浩也、近藤 光, 化学装置, Vol. 54, No. 5, p. 17-20, 2012/05
  • Thermoresponsive gelling behavior of concentrated alumina suspensions containing poly(acrylic acid) and PEO-PPO-PEO copolymer, Akira Kondo,Hui Xu,Hiroya Abe,Makio Naito, Journal of Colloid and Interface Science, Vol. 373, No. 1, p. 20-26, 2012/05/01
  • Novel recycling of frp by using nanoparticle bonding, Makio Naito,Hiroya Abe,Akira Kondo,Norifumi Isu, Nanoparticle Technology Handbook, Elsevier, p. 671-674, 2012
  • Non-prestonian behavior of rectangular shaped ceria slurry in shallow trench isolation chemical mechanical planarization, Ye-Hwan Kim,Yeon-Gil Jung,Gwang Seob Yoon,Jinok Moon,Akira Watanabe,Makio Naito,Ungyu Paik, Journal of Nanoscience and Nanotechnology, Vol. 12, No. 3, p. 2810-2814, 2012
  • Poly(Lactide-co-Glycolide) Encapsulated Hydroxyapatite Microspheres for Sustained Release of Doxycycline, Xiaoyun Wang,Hui Xu,Yanqiu Zhao,Shaoning Wang,Hiroya Abe,Makio Naito,Yanli Liu,Guoqing Wang, Materials Science and Engineering B, Vol. 117, p. 363-372, 2012/01
  • Densification and properties of AlN ceramic bonded carbon, Weiwu Chen,Yoshinari Miyamoto,Tetsuro Tojo,Makio Naito, Journal of the European Ceramic Society, Vol. 32, No. 1, p. 245-250, 2012/01
  • Three dimensional joining of thermoresponsive particle-dispersed gels, Akira Kondo,Hiroya Abe,Makio Naito, Trans. JWRI, Vol. 40, No. 2, p. 41-44, 2011/12
  • Joining of graphite and aluminum nitride ceramics by using CBC interlayer, Tomoyuki Okuni,Weiwu Chen,Tetsuro Tojo,Miyamoto Yoshinari,Makio Naito, Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 58, No. 11, p. 686-691, 2011/11
  • Estimation method for attenuation coefficient of thermal radiation in thermal insulators by using thermal conductivity, Takahiro Ohmura,Masatake Onodera,Makio Naito, Japanese Journal of Applied Physics, Vol. 50, No. 11, 2011/11
  • Effect of Grinding Method on the Recycling of Waste Flexible Printed Circuits, Akira Kondo,Shigeki Koyanaka,Tatsuya Ohki,Hiroya Abe,Makio Naito, J. Soc. Powder Technol. Jpn., Vol. 48, No. 11, p. 750-754, 2011/11
  • 粉体技術の最近の動向, 内藤 牧男、阿部 浩也, 化学装置, Vol. 53, No. 10, p. 37-42, 2011/10
  • Supramolecular hydrogel of bile salts triggered by single-walled carbon nanotubes, Zhenquan Tan,Satoshi Ohara,Makio Naito,Hiroya Abe, Advanced Materials, Vol. 23, No. 35, p. 4053-4057, 2011/09/15
  • 粉体技術の最近の動向, 内藤 牧男、阿部 浩也, 化学装置, Vol. 53, No. 10, p. 37-42, 2011/09
  • Generation of Fe nanoparticles by He-H2 arc plasma, J. Noma,Y.Ueshima,T. Fukui,H. Abe,K. Yamamoto,M. Tanaka,M. Naito, Quarterly J. Japan Welding Soc., Vol. 29, No. 3, p. 27s-30s, 2011/08
  • Smart Recycling of Composite Materials, Makio Naito,Hiroya Abe,Akira Kondo,Masashi Miura,Norifumi Isu,Takahiro Ohmura, Ceramic Engineering and Science Proceedings, Vol. 32, No. 8, p. 59-65, 2011/08
  • LiMnPO4粒子の構造形成と電池特性に及ぼす炭素添加の影響, 吉田 淳、中西 真二、射場 英紀、阿部 浩也、内藤 牧男, 粉体工学会誌, Vol. 48, No. 7, p. 473-478, 2011/07
  • Thermoreversible Gelling Slurry for Solid Freeforming Fabrication, Akira Kondo,Kazuo Kuruma,Hiroya Abe,Makio Naito, IOP Conf. Series: Materials Science and Engineering, Vol. 18, 2011/06
  • Effect of Carbon Composite on Lithium Manganese Phosphate Particles for Lithium Ion Battery Properties, Jun Yoshida,Shinji Nakanishi,Hideki Iba,Hiroya Abe,Makio Naito, J. Soc. Powder Technol. Jpn., Vol. 48, No. 6, p. 389-395, 2011/06
  • Development of Low-platinum Catalyst for Fuel Cells by Mechano-chemical Method, Hirokazu Munakata,Takamitsu Tashita,Kiyoshi Kanamura,Akira Kondo,Makio Naito, J. Soc. Powder Technol. Jpn., Vol. 48, No. 6, p. 364-369, 2011/06
  • これだけは学んでおきたい粉体技術, 内藤 牧男, 化学装置, Vol. 53, No. 5, p. 41-47, 2011/05
  • Microcapsule assembly of single-walled carbon nanotubes from spray-dried hollow microspheres, H. Xu,Z. Tan,H. Abe,M. Naito, Journal of the Ceramic Society of Japan, Vol. 119, No. 3, p. 180-184, 2011/03
  • Organic soft template method to arrange palladium nanoparticles on single-walled carbon nanotubes, Zhenquan Tan,Hiroya Abe,Makio Naito,Satoshi Ohara, Advanced Materials Research, Vol. 284-286, p. 750-754, 2011
  • Erratum: Development of a compact magnetorheological fluid clutch for human-friendly actuator (Advanced Robotics (2010) 24 (1489-1502)), Takehito Kikuchi,Kikuko Otsuki,Junji Furusho,Hiroya Abe,Junichi Noma,Makio Naito,Nicolas Lauzier, Advanced Robotics, Vol. 25, No. 9-10, 2011
  • Fabrication of thermoelectric Mg2Si by mechanofusion and pulsed electric current sintering, M. Nanko,H. Abe,M. Takeda,T. Homma,H. Abe,A. Kondo,M. Naito, IOP Conference Series: Materials Science and Engineering, Vol. 21, No. 1, 2011
  • Effect of process parameters on electrochemical properties of mechanically prepared composite powders for solid oxide fuel cells, Natsuro Hobara,Koichi Takizawa,Akifusa Hagiwara,Kazuyoshi Sato,Hiroya Abe,Makio Naito, Advanced Powder Technology, Vol. 22, No. 1, p. 102-107, 2011/01
  • Electrochemical and mechanical properties of solid oxide fuel cell Ni/YSZ anode fabricated from NiO/YSZ composite powder, Kazuyoshi Sato,Makio Naito,Hiroya Abe, Journal of the Ceramic Society of Japan, Ceramic Society of Japan, Vol. 119, No. 1395, p. 876-883, 2011
  • The effects of preparation conditions on mechanically fabricated composite particles for solid oxide fuel cells, Natsuro Hobara,Hiroya Abe,Makio Naito,Akifusa Hagiwara, Journal of the Ceramic Society of Japan, Ceramic Society of Japan, Vol. 119, No. 1395, p. 801-807, 2011
  • Smart powder processing for energy and environment, M. Naito,H. Abe,A. Kondo, WIT Transactions on Ecology and the Environment, WITPress, Vol. 154, p. 51-59, 2011
  • ナノ粒子分散系のレオロジー制御と機能性流体への応用, 阿部 浩也、近藤 光、山中 真也、内藤 牧男, 粉砕, No. 54, p. 41-46, 2011/01
  • Arrangement of Pd nanoparticles on SDS-functionalized single-walled carbon nanotubes, Zhenquan Tan,Hiroya Abe,Makio Naito,Satoshi Ohara, Trans. JWRI, Vol. 39, No. 2, p. 282-284, 2010/12
  • Dispersion control of magnetic nanoparticles for functional fluids, Shinya Yamanaka,Hiroya Abe,Makio Naito,Yuya Ueshima,Junichi Noma, Trans. JWRI, Vol. 39, No. 2, p. 241-242, 2010/12
  • Thermoreversible colloidal gelation for direct-assembly of nanoparticles, Akira Kondo,Masahiro Andatsu,Hiroya Abe,Makio Naito, Trans. JWRI, Vol. 39, No. 2, p. 238-240, 2010/12
  • A facile method to fabricate palladium nanoparticles arrangement on single-walled carbon nanotubes, Z. Tan,H. Abe,M. Naito,S. Ohara, Journal of Flux Growth, Vol. 5, No. 2, p. 55-58, 2010/12
  • Estimation Method for Attenuation Coefficient of Radiation in Thermal Insulation, Takahiro Ohmura,Masatake Onodera,Makio Naito, Proceedings of the 2nd International Symposium on Thermal Design and Thermophysical Property for Electronics and Energy, p. 66-71, 2010/12
  • Characterization and control of nanoparticle dispersion behavior for smart processing in liquid phase, Hidehiro Kamiya,Motoyuki Iijima,Shun Takenouchi,Chihiro Iinuma,Makio Naito, Trans. JWRI, Vol. 39, No. 2, p. 364-366, 2010/12
  • Development of Light Weight Materials with Low Thermal Conductivity by Making Use of Waste FRP, Akira Kondo,Hiroya Abe,Norifumi Isu,Masashi Miura,Azusa Mori,Takahiro Ohmura,Makio Naito, J. Soc. Powder Technol. Jpn., Vol. 47, No. 11, p. 768-772, 2010/11
  • ナノ粒子/繊維複合粒子による高性能断熱材の特性, 大村 高弘、伊藤 泰男、内藤 牧男, 工業加熱, Vol. 47, No. 6, p. 19-28, 2010/11
  • Arrangement of metal oxide nanoparticles by DNA, Satoshi Ohara,Jinghua Han,Kazuyoshi Sato,Makio Naito,Mitsuo Umetsu, Trans. JWRI, Vol. 39, No. 1, p. 39-42, 2010/09
  • Ceramic Nanoparticle Ink for Direct Colloidal Assembly, Akira Kondo,Hiroya Abe,Makio Naito, Trans. JWRI, Vol. 39, No. 1, p. 81-83, 2010/09
  • Nanostructured LSM/YSZ cathode for intermediate temperature solid oxide fuel cells, H.Abe,A.Kondo,K.sato,T.Kinoshita,M.Naito, Trans. JWRI, Vol. 39, No. 1, p. 65-68, 2010/09
  • Oriented growth behavior of Ag nanoparticles using SDS as a shape director, Zhenquan Tan,Hiroya Abe,Makio Naito,Satoshi Ohara, Journal of Colloid and Interface Science, Vol. 348, No. 1, p. 289-292, 2010/08
  • Eudragit polymer encapsulated hydroxyapatite microspheres as a carrier for the sustained release of small molecular drugs, Jianbo Guo,Hui Xu,Shaoning Wang,Sijie Zhang,Hiroya Abe,Xiaoyun Wang,Yanqiu Zhao,Makio Naito, Ceramic Transactions, Vol. 219, p. 265-272, 2010/08
  • Novel recycling process of waste FRP for advanced materials, Akira Kondo,Hiroya Abe,Makio Naito,Yasuko Okuni,Masashi Miura,Norifumi Isu, Ceramic Transactions, Vol. 219, p. 229-235, 2010/08
  • Fibrous composite powder compacts for thermal insulation at high temperature, Takahiro Ohmura,Yasuo Ito,Isami Abe,Hiroya Abe,Makio Naito, Ceramic Transactions, Vol. 219, p. 123-128, 2010/08
  • ワンポット処理によるFRP再利用技術, 井須 紀文、三浦 正嗣、森 梓、近藤 光、阿部 浩也、内藤 牧男, 強化プラスチックス, Vol. 56, No. 7, p. 195-198, 2010/07
  • Development of a compact magnetorheological fluid clutch for human-friendly actuator, Takehito Kikuchi,Kikuko Otsuki,Junji Furusho,Hiroya Abe,Junichi Noma,Makio Naito,Nicolas Lauzier, Advanced Robotics, Vol. 24, No. 10, p. 1489-1502, 2010/06/01
  • Arrangement of palladium nanoparticles templated by supramolecular self-assembly of SDS wrapped on single-walled carbon nanotubes, Zhenquen Tan,Hiroya Abe,Makio Naito,Satoshi Ohara, Chemical Communications, Vol. 46, No. 24, p. 4363-4365, 2010/05
  • 粉体工学と産学連携, 内藤 牧男, 化学経済, No. 4, p. 63-67, 2010/04
  • Towards sustained delivery of small molecular drugs using hydroxyapatite microspheres as the vehicle, Shaoning Wang,Xiaoyun Wang,Hui Xu,Hiroya Abe,Zhenquan Tan,Yanqiu Zhao,Jianbo Guo,Makio Naito,Hideki Ichikawa,Yoshinobu Fukumori, Advanced Powder Technology, Vol. 21, p. 268-272, 2010/03
  • Efficient dispersing and shortening of super-growth carbon nanotubes by ultrasonic treatment with ceramic balls and surfactants, Hui Xu,Hiroya Abe,Makio Naito,Yoshinobu Fukumori,Hideki Ichikawa,Shigehisa Endoh,Kenji Hata, Advanced Powder Technology, Vol. 21, p. 551-555, 2010/03
  • ワンポット処理によるFRPの再利用技術, 井須 紀文、三浦 正嗣、大国 泰子、近藤 光、阿部 浩也、内藤 牧男, プラスチックエージ, Vol. 56, No. 3, p. 106-108, 2010/03
  • Design and Development of Compact Magnetorheological Fluid Clutch (CMRFC) with Multi-layered Disks and Micro-sized Gaps, Takehito Kikuchi,Kikuko Otsuki,Junji Furusho,Hiroya Abe,Junichi Noma,Makio Naito, Journal of the Society of Rheology, Japan, Vol. 38, No. 1, p. 17-22, 2010/02
  • Compact MR fluid actuator for human friendly system, Junji Furusho,Takehito Kikuchi,Kikuko Otsuki,Hiroya Abe,Makio Naito,Katsuhiro Hirata, Next-Generation Actuators Leading Breakthroughs, Springer London, p. 329-336, 2010
  • Anisotropic Polyhedral Self-Assembly of Ag-CNT Nanocomposites, Z. Tan,H. Xu,H. Abe,M. Naito,S. Ohara, Journal of Nanoscience and Nanotechnology, Vol. 10, No. 6, p. 3978-3982, 2010/01
  • Powder processing issues for high quality advanced ceramics, Makio Naito,Masataro Okumiya,Hiroya Abe,Akira Kondo,C. C. Huang, KONA Powder and Particle Journal, Hosokawa Powder Technology Foundation, Vol. 28, No. 28, p. 143-154, 2010
  • 焼結体セラミックスの信頼性向上のための不均質構造の制御, 奥宮 正太郎、阿部 浩也、内藤 牧男, 粉体工学会誌, Vol. 47, p. 26-34, 2010/01
  • Magnetorheology of colloidal dispersion containing Fe nanoparticles synthesized by the arc-plasma method, Junichi Noma,Hiroya Abe,Takehito Kikuchi,Junji Furusho,Makio Naito, Journal of Magnetism and Magnetic Materials, Vol. 322, p. 1868-1871, 2010/01
  • An upgrade recycling from Mg alloy chips toward superconducting MgB2 via powder processing, Makoto Nanko,Daisuke Maruoka,Hitoshi Ozawa,Shigeharu Kamado,Hiroya Abe,Makio Naito, Journal of Ceramic Processing Research, Vol. 10, p. 840-843, 2009/12
  • Smart Powder Processing for Advanced Materials, Makio Naito,Hiroya Abe,Akira Kondo,Toyokoazu Yokoyama,C.C. Huang, KONA Powder and Particle Journal, No. 27, p. 130-141, 2009/12
  • Affecting Factors on the Generation Rate of Metallic Nanoparticles in Arc Plasma Method, Junichi Noma,Hiroya Abe,Kentaro Yamamoto,Manabu Tanaka,Makio Naito, J. Soc. Powder Technol. Jpn., Vol. 46, No. 12, p. 865-872, 2009/12
  • 粒子接合による微粒子複合構造の制御と材料の高機能化, 内藤 牧男、阿部 浩也、近藤 光, ケミカルエンジニヤリング, Vol. 54, p. 893-898, 2009/12
  • Novel Co-precipitation Derived LSM-YSZ Nanostructured Cathode for Intermediate Temperature Solid Oxide Fuel Cells, K.Sato,T. Kinoshita,H. Abe,and M.Naito, Journal of the Ceramic Society of Japan, Vol. 117, No. 11, p. 1186-1190, 2009/11
  • (111) Faceted Ceria and Its Influence on STI CMP for Memory Devices Below 50nm, Ye-Hwan Kim,Jong-Woo Kim,Akira Watanabe,Makio Naito,Ungyu Paik, Electrochemical and Solid State Letters, Vol. 12, No. 12, p. H449-H452, 2009/11
  • Fabrication and Evaluation of Thermal Insulation Materials by Using Nanoparticles/Fiber Composites for High Temperature, Takahiro Ohmura,Yasuo Ito,Isami Abe,Hiroya Abe,Makio Naito, J. Soc. Powder Technol. Jpn., Vol. 46, No. 11, p. 806-812, 2009/11
  • ナノ粒子を用いた材料の構造制御と高機能化への展開, 内藤 牧男、阿部 浩也、近藤 光, 工業材料, Vol. 57, No. 11, p. 33-37, 2009/11
  • Mechanical Synthesis of BaTiO3 from Nanocrystalline BaCO3 and TiO, Akira Kondo,Hirofumi Shimoda,Kazuyoshi Sato,Satoshi Ohara,Hiroya Abe,Makio Naito, Proceedings of Processing Materials for Properties, p. 865-868, 2009/10
  • Nanoparticle Dispersed Gels for Direct-Writing of Ceramic Structures, Akira Kondo,Hiroya Abe,Makio Naito,Jun Akedo, Proceedings of Processing Materials for Properties, p. 805-808, 2009/10
  • Influence of Hydrogen Induced Thermal Pinch on Nanoparticle Formation in Arc Plasma, Junichi Noma,Hiroya Abe,Makio Naito,Kentaro Yamamoto,Shinichi Tashiro,Manabu Tanaka, Quarterly Journal of The Japan Welding Society, Vol. 27, No. 2, p. 13s-16s, 2009/08
  • Role of Pore Defect and its Control in Sntered Ceramics, Masataro Okumiya,Hiroya Abe,Makio Naito, J. Soc. Powder Technol. Jpn., Vol. 46, No. 7, p. 532-540, 2009/07
  • Separation Characteristics of a Multi-stage VIS Impactor for PM10/PM2.5 Mass Concentration Measurement in a Stack of a Stationary Sources, Masashi Wada,Mayumi Tsukada,Akira Kondo,Nobuyuki Kogure,W.Lenggoro,W.W. Szymanski,Makio Naito,Chikao Kanaoka,Hidehiro Kamiya, J. Soc. Powder Technol. Jpn., Vol. 46, No. 6, p. 467-475, 2009/06
  • Development and Evaluation of Characteristics of Nanoporous Materials, Takahiro Ohmura,Isami Abe,Yasuo Ito,Kazuyoshi Sato,Hiroya Abe,Makio Naito, J. Soc. Powder Technol. Jpn., Vol. 46, No. 6, p. 461-466, 2009/06
  • Effect of Process Parameters on Electrochemical Properties of Mechanically Prepared Composite Powders for Solid Oxide Fuel Cells, Natsuro Hobara,Akifusa Hagiwara,Koichi Takizawa,Kazuyoshi Sato,Hiroya Abe,Makio Naito, J. Soc. Powder Technol. Jpn., Vol. 46, No. 6, p. 454-460, 2009/06
  • Enhanced electrochemical activity and long-term stability of Ni-YSZ anode derived from NiO-YSZ interdispersed composite particles, Kazuyoshi Sato,Hiroya Abe,Teruhiko Misono,Kenji Murata,Takehisa Fukui,Makio Naito, Fuel Cells Bulletin, Vol. 2009, No. 4, p. 12-16, 2009/04
  • 粉体ハンドリングのポイントと粉体技術の今後の展開, 内藤 牧男,阿部 浩也,近藤 光, 化学装置, Vol. 51, No. 5, p. 17-24, 2009/04
  • Enhanced electrochemical activity and long-term stability of Ni-YSZ anode derived from NiO-YSZ interdispersed composite particles, Kazuyoshi Sato,Hiroya Abe,Teruhiko Misono,Kenji Murata,Takehisa Fukui,Makio Naito, Journal of the European Ceramic Society, Vol. 29, p. 1119-1124, 2009/03
  • NiO/YSZ Nanocomposite Particles Synthesized via Co-precipitation Method for Electrochemically Active Ni/YSZ Anode, Kazuyoshi Sato,Go Okamoto,Makio Naito,Hiroya Abe, Journal of Power Sources, Vol. 193, p. 185-188, 2009/01
  • Effect of Process Characters of Nozzle-free Ink-jet Forming on its Printed Body Properties, Hisanori Yokoyama,Hideaki Tsuge,Seizo Obata,Masayoshi Kamai,Hiroya Abe,Makio Naito, J. Soc. Powder Technol. Jpn., Vol. 46, No. 1, p. 13-19, 2009/01
  • ナノ粒子接合による材料の構造制御とその応用, 内藤 牧男,阿部 浩也,佐藤 和好, 機械の研究, Vol. 60, p. 931-936, 2008/09
  • Mechanical milling with capacitively coupled plasma for surface modification of particulate materials, Jun-ichi Noma,Hiroya Abe,Kosuke Takenaka,Yuichi Setsuhara,Makio Naito, Surface and Coatings Technology, Vol. 202, p. 5347-5349, 2008/08
  • Formation of Porous Fumed Silica Coating on the Surface of Glass Fibers by a Dry Mechanical Processing Technique, Isami Abe,Kazuyoshi Sato,Hiroya Abe,Makio Naito, Advanced Powder Technology, Vol. 19, p. 311-320, 2008/08
  • Influence of Porous Anode Microstructure on the Polarization Characteristics of Solid Oxide Fuel Cell, Jun Abe,Toshiyuki Sano,Takeshi Yamamoto,Mitsukuni Mizuno,Hidetoshi Mori,Makio Naito, Smart Processing Technology, Vol. 2, p. 289-292, 2008/03
  • Effect of water content in powder mixture on mechanochemical reaction of LaMnO3 fine powder, Satoshi Ohara,Hiroya Abe,Kazuyoshi Sato,Akira Kondo,Makio Naito, Journal of the European Ceramic Society, Vol. 28, No. 9, p. 1815-1819, 2008/02
  • Rapid mechanochemical synthesis of fine barium titanate nanoparticles, Satoshi Ohara,Akira Kondo,Hirofumi Shimoda,Kazuyoshi Sato,Hiroya Abe,Makio Naito, Materials Letters, Vol. 62, No. 17-18, p. 2957-2959, 2008/02
  • Controlled release of bovine serum albumin from hydroxyapatite microspheres for protein delivery system, Boonsongrit Yaowalak,Hiroya Abe,Kazuyoshi Sato,Makio Naito,Masahiro Yoshimura,Hideki Ichikawa,Ysohinobu Fukumori, Materials Science and Engineering B, Vol. 148, p. 162-165, 2008/02
  • CFD investigation of high-temperature gas filtration using twin ceramic candles, W. Tanthapanichakoon,T. Charinpanitkul,W. Jintaworn,J. Laksameearunotai,M. Amornkitbamrung,T. Fukui,M. Yoshikawa,M. Naito, Powder Technology, Vol. 180, No. 1-2, p. 245-252, 2008/01/14
  • Immobilization of highly-dispersed single-walled carbon nanotubes in biocompatible and water-soluble solid matrix, Hui Xu,Hiroya Abe,Makio Naito,Hideki Ichikawa,Yoshinobu Fukumori,Shigehisa Endoh, Journal of the Ceramic Society of Japan, Ceramic Society of Japan, Vol. 116, No. 1357, p. 965-968, 2008
  • Development of a geometrical model for optimizing porous anode microstructure of solid oxide fuel cells, Hidetoshi Mori,Noboru Nonaka,Mitsukuni Mizuno,Hiroya Abe,Makio Naito, Journal of Chemical Engineering of Japan, Vol. 41, No. 4, p. 246-253, 2008
  • Grafting of material-binding function into antibodies -Functionalization by peptide grafting-, Hattori Takamitsu,Mitsuo Umetsu,Takeshi Nakanishi,Kouhei Tsumoto,Satoshi Ohara,Hiroya Abe,Makio Naito,Ryutaro Asano,Tadafumi Adschiri,Izumi Kumagai, Biochemical and Biophysical Research Communications, Vol. 365, No. 4, p. 751-757, 2008/01
  • Preparation of LSM/ScSZ composite powder materials by spray pyrolysis for the pre-fabrication of SOFC cathodes, Akifusa Hagiwara,Natsuro Hobara,Koichi Takizawa,Kazuyoshi Sato,Hiroya Abe,Makio Naito, Solid State Ionics, Vol. 178, No. 27-28, p. 1552-1562, 2007/11
  • Preparation of Alumina Nitride Ceramics by Aqueous Slip-Casting, H.Yokoyama,Y.Todaka,Y.Imoto,H.Abe,M.Naito,K.Kikuta, J. Soc. Powder Technol. Jpn., Vol. 44, No. 11, p. 798-805, 2007/11
  • Evaluation of dispersants for dispersing/solubilizing purified HiPco SWNTs in aqueous medium via vis-NIR spectrophotometry method, Hui Xu,Hiroya Abe,Makio Naito,Yoshinobu Fukumori,Hideki Ichikawa,Shigehisa Endoh, Proceedings of the Third Asian Particle Technology Symposium, Vol. 2, p. 904-911, 2007/09
  • Comparison of emission behavior measurement methods of PM2.5 from stationary sources, Masashi Wada,Chikao Kanaoka,Akira Kondo,Makio Naito,Yuyu Liu,Mayumi Tsukada,Wuled Lenggoro,Hidehiro Kamiya, Proc. 8th Int. Conf. on Emissions Monitoring(CEM2007), p. 148-152, 2007/09
  • Influence of Separator and Diluter Structure on Emission Behavior Measurement of PM10/2.5 and Condensable Suspended Particulate Matter from Stationary Sources, Hidehiro Kamiya,Nakaha Nishikawa,Masashi Wada,Akira Kondo,Yuyu Liu,Mayumi Tsukada,Wuled Lenggoro,Chikao Kanaoka,Makio Naito, Proc. 8th Int. Conf. on Emissions Monitoring(CEM2007), p. 64-69, 2007/09
  • Nanoparticle Processing for Nano/microstructural Control of Advanced Materials, M.Naito,H.Abe,K.Sato, Chemical Industry, Vol. 58, p. 715-720, 2007/09
  • Microstructure control of SOFC cathodes using the self-organizing behavior of LSM/ScSZ composite powder material prepared by spray pyrolysis, Akifusa Hagiwara,Natsuro Hobara,Koichi Takizawa,Kazuyoshi Sato,Hiroya Abe,Makio Naito, Solid State Ionics, Vol. 178, p. 1123-1132, 2007/08
  • Synthesis of Barium Titanate from Nanocrystalline BaCO3 and TiO2, Akira Kondo,Kazuyoshi Sato,Hiroya Abe,Makio Naito,Hirofumi Shimoda, Characterization and Control of Interfaces for High Quality Advanced Materials II: Ceramic Transactions, Vol. 198, p. 375-380, 2007/07
  • Development of Filtration Technology for PM2.5 in Diesel Exhaust, Masahiro Yoshikawa,Tomohiko Uemura,Daiki Kan,Takehisa Fukui,Tawatchai Charinpanitkul,Wiwut Tanthapanichakoon,Makio Naito, Characterization and Control of Interfaces for High Quality Advanced Materials II: Ceramic Transactions, Vol. 198, p. 339-344, 2007/07
  • Evaluation of the Long Term Stability of LSM/ScSZ Composite Powder Materials for SOFC Cathodes, Akifusa Hagiwara,Natsuro Hobara,Hiroyuki Shimada,Koichi Takizawa,Kazuyoshi Sato,Hiroya Abe,Makio Naito, Characterization and Control of Interfaces for High Quality Advanced Materials II: Ceramic Transactions, Vol. 198, p. 317-323, 2007/07
  • A Mechanically Synthesized La0.8Sr0.2MnO3 Fine Powder for the Cathode Material of an Intermediate Temperature Solid Oxide Fuel Cell (IT-SOFC), Kazuyoshi Sato,Akira Kondo,Hiroya Abe,Makio Naito,Jintawat Chaichanawong, Characterization and Control of Interfaces for High Quality Advanced Materials II: Ceramic Transactions, Vol. 198, p. 225-230, 2007/07
  • Influence of Water Content of Starting Powder Mixture on the Mechanochemical Synthesis of Strontium Doped Lanthanum Manganite, Jintawat Chaichanawong,Kazuyoshi Sato,Hiroya Abe,Makio Naito,Tawatchai Charinpanitkul,Wiwut Tanthapanichakoon, Characterization and Control of Interfaces for High Quality Advanced Materials II: Ceramic Transactions, Vol. 198, p. 199-204, 2007/07
  • Structure on Electrochemical and Mechanical Properties of Thick Ni-YSZ Anode, K. Sato,G. Okamoto,H. Abe,M. Naito, ECS Transactions, Vol. 7, No. -1, p. 1555-1561, 2007/06
  • Dry Coating Technique for Nanosized La0.8Sr0.2MnO3 Powder for SOFC Cathode, H. Abe,H. Shimoda,K. Sato,M. Naito, ECS Transactions, Vol. 7, No. -1, p. 1115-1118, 2007/06
  • Microstructures and Properties of Composite Films Fabricated by Aerosol Deposition of Nanoparticle Coated BaTiO3, H.Abe,M.Takashima,K.Sato,M.Naito,J.Akedo, Proceedings of the 16th IEEE International Symposium on the Applications of Ferroelectrics (ISAF 2007), 2007/05
  • Effect of Slurry Preparation Conditions of Soft Ferrite Powder on the Properties of Its Sintered Body, M.Uemura,K.Sato,H.Abe,M.Naito,K.Nogi,K.Uematsu, Journal of the Society of Powder Technology Japan, Vol. 44, No. 4, p. 242-247, 2007/04
  • Encapsulation of protein-loaded hydroxyapatite granules with poly (lactic-co-glycolic acid), Yaowalak Boonsongrit,Kazuyoshi Sato,Akira Kondo,Hiroya Abe,Makio Naito,Masahiro Yoshimura,Hideki Ichikawa,Yoshinobu Fukumori, Journal of the Ceramic Society of Japan, Ceramic Society of Japan, Vol. 115, No. 1347, p. 745-747, 2007
  • Electric Discharge in Comminution Process and Surface Modification of Nanoparticles, J.Noma,H.Abe,K.Takenaka,Y.Setsuhara,M.Naito, Proceedings of the 24th Symposium on Plasma Processing, p. 5-6, 2007/01
  • Mechanochemical Synthesis of BaTiO3 from TiO2 and BaCO3, Akira Kondo,Hirofumi Shimoda,Kazuyoshi Sato,Hiroya Abe,Makio Naito, Transactions of JWRI, Vol. 35, No. 2, p. 63-65, 2006/12
  • Formation of strontium-doped lanthanum manganite(La0.8Sr0.2MnO3) by mechanical milling without media balls, Jintawat Chaichanawong,Kazuyoshi Sato,Hiroya Abe,Kenji Murata,Takehisa Fukui,Tawatcai Charinpanitkul,Wiwut Tanthapanichakoon,Makio Naito, Advanced Powder Technology, Vol. 17, p. 613-622, 2006/12
  • Preparation and evaluation of mechanochemically fabricated LSM/ScSZ composite materials for SOFC cathodes, Akifusa Hagiwara,Natsuro Hobara,Koichi Takizawa,Kazuyoshi Sato,Hiroya Abe,Makio Naito, Solid State Ionics, Vol. 177, p. 2967-2977, 2006/11
  • 日本におけるナノパーティクルテクノロジーの最新動向, 内藤 牧男, 粉砕, No. 50, p. 47-51, 2006/10
  • Influence of NH3/Ar plasma irradiation on physical and photocatalytic properties of TiO2 nanopowder, Hiroya Abe,Tsukasa Kimitani,Makio Naito, Journal of Photochemistry and Photobiology A: Chemistry, Vol. 183, p. 171-173, 2006/09
  • Microstructural Control of Composite Anode for Anode Supported Intermediate Temperature Solid Oxide Fuel Cells, Kazuyoshi Sato,Masayasu Uemura,Akira Kondo,Hiroya Abe,Makio Naito,Kiyoshi Nogi, Advances in Science and Technology, Vol. 45, p. 1869-1874, 2006/09
  • Nanoparticle Bonding Technology for Composite Materials, Makio Naito,Hiroya Abe,Kazuyoshi Sato, Advances in Science and Technology, Vol. 45, p. 1704-1710, 2006/09
  • Surface Modification of Nanopowder by Milling under Electric Discharge, Hiroya Abe,Akira Kondo,Kosuke Takenaka,Yuichi Setsuhara,Makio Naito, Advances in Science and Technology, Vol. 45, p. 363-367, 2006/09
  • ドライプロセスによるナノ粒子構造制御とその応用, 内藤 牧男,阿部 浩也, 工業材料, Vol. 54, No. 8, p. 62-65, 2006/08
  • Ni-SDC cermet anode fabricated from NiO-SDC composite powder for intermediate temperature SOFC, Teruhiko Misono,Kenji Murata,Takehisa Fukui,Jintawat Chaichanawong,Kazuyoshi Sato,Hiroya Abe,Makio Naito, Journal of Power Sources, Vol. 157, No. 2, p. 754-757, 2006/07/03
  • 水系スラリーを用いた窒化アルミニウム顆粒の作製とその焼結体特性, 横山 久範,戸高 栄弘,伊本 靖,阿部 浩也,内藤 牧男,菊田 浩一,平野 眞一, 粉体工学会誌, Vol. 43, p. 492-499, 2006/07
  • Aanalysis of Carbon Spherical Substance Generated by Arc Electric Discharge, Toshihiko Yoshimura,Hiroyuki Kato,Hirofumi Ishibashi,Hiroya Abe,Makio Naito, Smart Processing Technology, High Temperature Society of Japan, Vol. 1, p. 211-215, 2006/06
  • Low Temperature Synthesis of Strontium Doped Lanthanum Manganite (La0.8Sr0.2MnO3) by Advanced Mechanochemical Process, Jintawat Chaichanawong,Kazuyoshi Sato,Hiroya Abe,Kenji Murata,Takehisa Fukui,Tawatchai Charinpanitkul,Wiwut Tanthapanichakoon,Makio Naito, Smart Processing Technology, High Temperature Society of Japan, Vol. 1, p. 207-210, 2006/06
  • 微粉砕技術のナノ粒子リアクターへの展開, 内藤 牧男,阿部 浩也,佐藤 和好, 化学装置, Vol. 48, No. 6, p. 9-11, 2006/06
  • ファイン化、ナノ化を目指す粉体プロセスの新展開, 内藤 牧男,阿部 浩也, 化学装置, Vol. 48, No. 2, p. 27-32, 2006/05
  • Microstructural control of Ni-YSZ cermet anode for planar thin-film SOFCs, Hiroya Abe,Kenji Murata,Takehisa Fukui,W. J. Moon,Kenji Kaneko,Makio Naito, Fuel Cells Bulletin, Vol. 2006, No. 3, p. 12-15, 2006/03
  • Mechanochemical synthesis of LaMnO3+delta fine powder assisted with water vapor, Kazuyoshi Sato,Jintawat haichanawong,Hiroya Abe,Makio Naito, Materials Letters, Vol. 60, No. 11, p. 1399-1402, 2006/03
  • Microstructural control of Ni-YSZ cermet anode for planer thin-film solid oxide fuel cells, H. Abe,K. Murata,T. Fukui,W. J. Moon,K. Kaneko,M. Naito, Thin Solid Films, Vol. 496, No. 1, p. 49-52, 2006/02/01
  • Direct observation of powder agglomerated structure in ceramic slurries using optical microscopy, Hiroya Abe,Makio Naito,Kenji Okamoto,Tadashi Hotta,Satoshi Ohara,Takehisa Fukui, Advanced Powder Technology, VSP BV, Vol. 17, No. 6, p. 681-688, 2006
  • Structure of strength-limiting flaws in alumina ceramics made by the powder granule compaction process, Kazuyoshi Sato,Hiroya Abe,Makio Naito,Tadashi Hotta,Keizo Uematsu, Advanced Powder Technology, VSP BV, Vol. 17, No. 2, p. 219-228, 2006
  • Immersion Microscopy for Ceramics Green Compact, Kazuyoshi Sato,Hiroya Abe,Makio Naito,Yutaka Saito,Keizo Uematsu, Am.Ceram.Soc.Bull, Vol. 85, p. 9301-9310, 2006/01
  • 材料の透光観察による粒子分散状態の直接評価, 阿部 浩也,内藤 牧男, 粉砕, Vol. 49, p. 62-67, 2005/12
  • ナノ粒子プロセスとその応用, 内藤 牧男,阿部 浩也,野城 清, 表面技術, Vol. 56, p. 748-753, 2005/12
  • Effects of granule compaction procedures on defect structure, fracture strength and thermal conductivity of AlN ceramics, Hiroya Abe,Kazuyoshi Sato,Makio Naito,Kiyoshi Nogi,Tadashi Hotta,Jun-ichi Tatami,Katsutoshi Komeya, Powder Technology, Vol. 159, p. 155-160, 2005/11
  • Relevance of the internal structures to fracture strength of injection molded and sintered silicon nitride ceramics, N.Shinohara,S.Ohsaka,T.Hotta,H.Abe,M.Naito,K.Uematsu, Advanced Powder Technology, Vol. 16, p. 435-434, 2005/10
  • Development of Filtration Technology for PM 2.5 in Diesel Exhaust, M.Yoshikawa,T.Uemura,D.Kan,T.Fukui,T.Charinpanitkul,W.Tanthapanichakoon,M.Naito, Advanced Gas Cleaning Technology, Jugei Shobo, p. 679-684, 2005/10
  • CFD Investigation of High Temperature Gas Filtration Using Twin Ceramic Candles, W.Tanthapanichakoon,T.Charinpanitkul,W.Jintaworn,J.Laksameearunotai,M.Amornkitbamrung,T.Fukui,M.Yoshikawa,M.Naito, Advanced Gas Cleaning Technology, Jugei Shobo, p. 211-218, 2005/10
  • 機械的作用とグロー放電によるナノ粒子の表面構造制御, 佐藤 和好,阿部 浩也,内藤 牧男, セラミックデータブック, Vol. 33, p. 120-121, 2005/10
  • インクジェット成形による材料構造制御と傾斜組成制御への展開, 内藤 牧男,阿部 浩也, 工業材料, Vol. 53, No. 10, p. 53-56, 2005/10
  • Influence of Size Distributions of LSM/YSZ Composite Powders on Microstructure and Performance of SOFC Cathodes, C.Jintawat,K.Sato,H.Abe,K.Murata,T.Fukui,T.Charinpanitkul,W.Tanthapanichakoon,M.Naito, Transactions of JWRI, Vol. 34, No. 1, p. 55-59, 2005/09
  • Novel Dry Nanopowder Processing for Producing Nanoporous Materials, Hiroya Abe,Isami Abe,Kazuyoshi Sato,Makio Naito, Materials Science & Technology, p. 3-10, 2005/09
  • ナノテクノロジーを支える粒子・粉体特性評価技術, 阿部 浩也,内藤 牧男, 化学装置2005年9月号別冊, Vol. 9, p. 16-20, 2005/09
  • ナノ粒子ボンディング技術による粒子・材料の構造制御, 内藤 牧男,阿部 浩也,佐藤 和好, 粉体工学会誌, Vol. 42, p. 625-631, 2005/09
  • Characterization of TiO2-Ag nanocomposite particles prepared by spray pyrolysis process using transmission electron microscopy and three-dimensional electron tomography, Kenji Kaneko,Won-Jin Moon,Koji Inoke,Zenji Horita,Satoshi Ohara,Tadafumi Adschiri,Hiroya Abe,Makio Naito, Materials Science and Engineering A, Vol. 403, No. 1-2, p. 32-36, 2005/08/25
  • Morphology Control of La(Sr)Fe(Co)O3-a Cathodes for IT-SOFCs, K.Murata,T.Fukui,H.Abe,M.Naito,K.Nogi, Journal of Power Sources, Vol. 145, p. 257-261, 2005/08
  • Surface Modification of Nanosized TiO2 Powder by Mechanical Processing with Glow discharge, H.Abe,T.Kimitani,K.Sato,M.Naito,K.Nogi, Journal of the Soiety of Powder technology Japan, Vol. 42, p. 409-412, 2005/06
  • Effect of Cyclic Number of CIP of silicon Nitride Granule Bed on the Properties of Resultant Ceramics, T.Hotta,Y.Matsuo,H.Abe,M.Naito, Journal of the Soiety of Powder technology Japan, Vol. 42, p. 330-332, 2005/05
  • Processing Paramerters of Mechanically Obtained NiO/YSZ Composite particles and their Relevance to Properties of Ni/YSZ SOFC Cermet Anode, K.Murata,T.Fukui,H.Abe,M.Naito,K.Nogi, Journal of the Soiety of Powder technology Japan, Vol. 42, p. 312-316, 2005/05
  • Dry Powder Processing of Fibrous Fumed Silica Compact for Thermal Insulation, H.Abe,I.Abe,K.Sato,M.Naito, Journal of American Ceramic Society, Vol. 88, p. 1359-1361, 2005/05
  • Effect of Granule Compaction Procedures of Aluminum Nitride on the Properties of Green Body and Resultant ceramics, H.Abe,K.Sato,M.Naito,K.Nogi,T.Hotta,J.Tatami, Journal of the Soiety of Powder technology Japan, Vol. 42, p. 238-243, 2005/05
  • Effect of coarse particles on the strength of alumina made by slip casting, T.Hotta,H.Abe,M.Naito,M.Takahashi,K.Uematsu,Z.Kato, Powder Technology, Vol. 149, p. 106-111, 2005/04
  • Particle Bonding Technology for Composite Materials-Microstructure Control and its Characterization, M.Naito,H.Abe, Ceramic Transactions, Vol. 157, p. 69-76, 2005/03
  • Process Performance of Dry Powder Coating for Preparing Controlled Release Microcapsules by a High Speed Mixer, Y.Fukumori,H.Ichikawa,T.Uemura,K.Sato,H.Abe,M.Naito, Proceedings of 8th International Symposium on Agglomeration, p. 31-38, 2005/03
  • Structural and analytical characterization of as-grown MgB2 film sputtered on differently oriented α-Al2O3 substrate, W. J. Moon,K. Kaneko,S. Toh,M. Saunders,A. Saito,Z. Wang,H. Abe,M. Naito, Superconductor Science and Technology, Vol. 18, No. 1, p. 92-100, 2005/01
  • Surface modification of nanoparticles by mechanical milling with glow discharge, H. Abe,T. Kimitani,M. Naito,K. Nogi,T. Fukui,W. J. Moon,K. Kaneko, Novel Materials Processing by Advanced Electromagnetic Energy Sources, Elsevier, p. 257-260, 2005
  • Characterization of Large Defects in Alumina Green Compact with Liquid Immersion-polarized Light Microscopy, K.Sato,Y.Saito,T.Hotta,H.Abe,M.Naito,K.Uematsu, Transactions of JWRI, Vol. 33, No. 2, p. 127-130, 2004/12
  • 材料特性向上のための液中粒子分散制御の重要性, 内藤 牧男,阿部 浩也, 粉砕, No. 48, p. 56-62, 2004/12
  • 粉体の構造制御と材料分野への応用, 内藤 牧男,阿部 浩也, 高温学会誌, Vol. 30, p. 308-315, 2004/12
  • ナノテクノロジーにおける粒子・粉体特性評価技術の役割, 内藤 牧男,阿部 浩也, 粉体と工業, Vol. 36, No. 6, p. 28-34, 2004/12
  • 燃料電池性能向上のための粒子複合化技術, 内藤 牧男,阿部 浩也,福井 武久, 月刊 MATERIAL STAGE, Vol. 4, No. 4, p. 107-113, 2004/12
  • ノズルなしインクジェット成形システム -超音波を利用した新成形技術-, 内藤 牧男,阿部 浩也, 超音波テクノ, Vol. 16, No. 2, p. 46-49, 2004/12
  • Composite Powders Synthesis by Spray Pyrolysis, S. Ohara,M. Umetsu,S. Takami,M. Itagaki,J- H. Lee,H. Abe,M. Naito,K. Nogi,T. Fukui, Ceramic Transactions, The American Ceramic Society, Vol. 146, p. 427-433, 2004/11
  • Formation of MgB2 Superconducting Phase from Mg and B Composite Particles Produced by Mechanical Mixing, H. Abe,M. Naito,K. Nogi,S. Ohara,A. Kondo,T. Fukui,M. Matsuda,M. Miyake, Ceramic Transactions, The American Ceramic Society, Vol. 146, p. 277-282, 2004/11
  • Morphology and Performance of a Ni-YSZ Cermet Anode for Solid Oxide Fuel Cells, T. Fukui,K. Murata,H. Abe,M. Naito,and K. Nogi, Ceramic Transactions, The American Ceramic Society, Vol. 146, p. 255-259, 2004/11
  • 窒化チタンの鋳込成形におけるイットリア添加方法の影響, 横山 久範,尾畑 成造,加藤 布久,堀田 禎,阿部 浩也,内藤 牧男,菊田 浩一,平野 眞一, Journal of Ceramics Society of Japan, Vol. 112, No. 11, p. 604-607, 2004/11
  • Synthesis TiO2 Nano-Powders from Aqueous Solutions with Various Cation and Anion Apecies, Yong-Ick Cho,Doo-Sun Hwang,Sun-Jae Kim,keizo Uematsu,Sang-Chul Jung,Naito Makio,Kiyoshi Nogi, Ceramic Transactions Vol.146,Characterization & Control of Interfaces for High Quality Advanced Materials, Vol. 146, p. 59-66, 2004/11
  • A New Process Development for Producing Metal Bonded Powder Coatings, H.Tsujimoto,N.Kinoshita,C.C.Huang,M.Naito,K.Nogi,I.Sekiguchi, Conference Proc. of Powder Coating 2004, p. 114-128, 2004/09
  • Experimental and Theoretical Analysis of Mechanical Coating Process of Particles with Theta Composer, Endoh Shigehisa,Janos Szepvologyi,Tadashi Hotta,Makio Naito,Katsuyuki Izumi, Chem. Eng. Communications, Vol. 191, p. 1259-1270, 2004/09
  • ナノ粒子プロセスと新材料設計, 阿部 浩也,内藤 牧男,野城 清, 未来材料, Vol. 4, No. 9, p. 20-25, 2004/09
  • XRD and TEM studies of as-grown MgB2 thin films deposited on r-and c-plane sapphire substrate, Saito A.,H.Shimakage,A.Kawakami,Z.Wang,K.Kuroda,H.Abe,M.Naito,W.J.Moon,K.Kaneko,M.Mukaida,S.Ohshima, Physica C, Vol. 412-414, p. 1366-1370, 2004/08
  • Preparation of three-dimensionally electroconductive pattern of Si3N4-TiN system by ink jet printing, Yokoyama Hisanori,Seizo Obata,Nobuhiro Kato,Tadashi Hotta,Hiroya Abe,Makio Naito,Shin-ichi Hirano, J. Ceram. Soc., Japan, Vol. 112, No. 5, p. 144-148, 2004/05
  • Formation of Nanostructure Composites Using Advanced Mechanical Processing, Tahara Daiji,Yasuo Itoh,Takahiro Ohmura,Hiroya Abe,Makio Naito, Ceramic Transactions, Am. Ceram. Soc., Vol. 146, p. 173-177, 2004/04
  • Effects of Slurry Preparation Conditions on Granule Properties and the Strength of Alumina Ceramics, Furukawa Makoto,Tadashi Hotta,Kenji Okamoto,Hiroya Abe,Makio Naito, Ceramic Transactions, Am. Ceram. Soc., Vol. 146, p. 73-79, 2004/04
  • Morphology control of Ni-YSZ cermet anode for lower temperature operation of SOFC, Fukui Takehisa,Kenji Murata,Satoshi Ohara,Hiroya Abe,Makio Naito,Kiyoshi Nogi, Journal of Power Sources, Vol. 125, p. 17-21, 2004/04
  • Design of Composite Particles- Key to Creation of New Industries, M.Naito,H.Abe, Material Processing for Properties and Performance (MP3), p. 283-290, 2004/04
  • Design of Porous Materials by Dry Procseeing, H.Abe,M.Naito,Y.Itoh,D.Tahara, Material Processing for Properties and Performance (MP3), p. 277-282, 2004/04
  • Composite powders processed by an advanced mechanical method for the fabrication of cermet anodes of solid oxide fuel cells, Kenji Murata,Takehisa Fukui,C. C. Huang,Makio Naito,Hiroya Abe,Kiyoshi Nogi, Journal of Chemical Engineering of Japan, Vol. 37, No. 4, p. 568-571, 2004/04
  • Morphology Control of SOFC Electrodes by Mechano-Chemical Bonding Technique, Fukui Takehisa,Kenji Murata,C. C. Huang,Makio Naito,Hiroya Abe,Kiyoshi Nogi, The Ceramic Engineering and Science Proceedings, Am. Ceram. Soc., Vol. 25, p. 263-267, 2004/04
  • Interface structures of AlN/MgB2 thin films sputtered on sapphire c- and r- plane, Abe Hiroya,Makio Naito,W.-J. Moon,K. Kaneko,A.Saito,Z. Wang, J. Applied Physics, Vol. 96, p. 2343-2346, 2004/04
  • AlN焼結体の不均質構造に及ぼす原料粉末中の粗大粒子の影響, 仲田 博彦,多々見 純一,波木 将宏,米屋 勝利,目黒 竹司,柊平 啓,内藤 牧男,堀田 禎, J. Ceram. Soc.,Japan, Vol. 112, p. 35-39, 2004/04
  • Effect of addition procedures of Yttria on slip casting of titanium nitride, Hisanori Yokoyama,Seizo Obata,Nobuhisa Kato,Tadashi Hotta,Hiroya Abe,Makio Naito,Kouichi Kikuta,Shin-Ichi Hirano, Journal of the Ceramic Society of Japan, Ceramic Society of Japan, Vol. 112, No. 1311, p. 604-607, 2004
  • Determining Grain Size in Ceramics, Hotta Tadashi,Junichi Tatami,Hdehiko Tanaka,Nobuhiro Shinohara,Hideyuki Emoto,Mitsuru Hattori,Yukio Kishi,Hiroya Abe,Makio Naito,Keizo Uematsu, Am. Ceram. Soc. Bull., Vol. 83, No. 11, p. 9101-9105, 2004/01
  • 光学顕微鏡によるスラリ-中粒子凝集構造の直接観察, 阿部 浩也,内藤 牧男,岡本 健二,堀田 禎,大原 智,福井 武久, 粉体工学会誌, Vol. 41, p. 10-14, 2004/01
  • Effect of calcination of the mixture of alumina powder and aqueous magnesium solution on the microstructure and properties of sintered bodies, Yong-Ick Cho,Sun-Jae Kim,Naomichi Miyagawa,Nobuhiro Shinohara,Masataro Okumiya,Tadashi Hotta,Makio Naito,Keizo Uematsu, Advanced Powder Technology, VSP BV, Vol. 15, No. 3, p. 351-363, 2004
  • Pore Defects Related to Slurry Character and their Relevance to Strength Distribution in Alumina Cermics, Abe Hiroya,Makio Naito,Tadashi Hotta,Hidehiro Kamiya,Keizo Uematsu, Powder Technology, Vol. 134, p. 58-64, 2003/12
  • 粒子・粉体ナノテクノロジーとその応用, 内藤 牧男,阿部 浩也, ファルマシア, Vol. 39, p. 1169-1172, 2003/12
  • 微粒子・粉体ナノテクノロジーの動向 -産学連携と国際展開を中心に-, 内藤 牧男,阿部 浩也, 配管技術, Vol. 45, No. 6, p. 45-49, 2003/12
  • ナノセラミックス, 福井 武久,内藤 牧男, 化学装置, Vol. 45, No. 3, p. 37-39, 2003/12
  • 微粒子・粉体ナノテクノロジーと産学連携、国際展開, 内藤 牧男, 粉体と工業, Vol. 35, No. 2, p. 47-49, 2003/12
  • Performance and Stability of SOFC Anode Fabricated from NiO/YSZ Composite Particles, Fukui Takehisa,Satoshi Ohara,Makio Naito,Kiyoshi Nogi, J. European Ceram. Soc., Vol. 23, p. 2963-2967, 2003/12
  • Raw Materials, Makio Naito,Nobuhiro Shinohara,Keizo Uematsu, Handbook of Advanced Ceramics: Materials, Applications, Processing and Properties, Elsevier Inc., Vol. 1-2, p. 81-129, 2003/11/15
  • Low temperature formation of superconducting MgB2 phase from elements by mechanical milling, Abe Hiroya,Makio Naito,Kiyoshi Nogi,Motohide Matsuda,Michihiro Miyake,Satoshi Ohara,Akira Kondo,Takehisa Fukui, Physica C, Vol. 391, p. 211-216, 2003/09
  • Characterization of coarse particles in alumina powders by a wet sieving method, Kenji Nakahira,Tadashi Hotta,Makio Naito,Nobuhiro Shinohara,Yong-Ick Cho,Shigemi Katori,Hideyuki Emoto,Tetsuo Yamada,Takashi Takahashi,Masataro Okumiya,Chie Kumagai,Keizo Uematsu, Journal of the European Ceramic Society, Vol. 23, No. 10, p. 1661-1666, 2003/09
  • 超音波減衰分光法による低濃度分散系におけるシリカ粒子径分布評価, 阿部 浩也,内藤 牧男,中平 兼司,堀田 禎,鈴木 能大,嶋田 博巳,米倉 健二,加藤 仁也, 化学工学論文集, Vol. 29, p. 442-444, 2003/06
  • Flaw Size Distribution in High-Quality Alumina, Abe Hiroya,Makio Naito,Tadashi Hotta,Nobuhiro Shinohara,Keizo Uematsu, J.Am.Ceram.Soc., Vol. 186, p. 1019-1021, 2003/06
  • Characterization of Large Defects in Alumina, Sato,K.,S.Tanaka,N.Uchida,K.Uematsu,H.Abe,M. Naito,T. Hotta,N. Shinohara, American Ceramic Society Bulletin, Vol. 82, No. 4, p. 39-42, 2003/04
  • 窒化チタンインク特性がインクジェット印刷に与える影響, 横山 久範,加藤 布久,堀田 禎,内藤 牧男,平野 眞一, J.Ceram.Soc.,Japan, Vol. 111, p. 262-266, 2003/04
  • 溶融炭酸塩形燃料電池用MgドープCoO-NiO系複合カソードの細孔構造と性能, 福井 武久,大川 元,大原 智,内藤 牧男,野城 清, 化学工学論文集, Vol. 29, p. 204-207, 2003/04
  • 偏向顕微鏡を用いたアルミナテ-プ成形体の粒子配向評価, 阿部 浩也,岡本 健二,堀田 禎,内藤 牧男,植松 敬三, 粉体工学会誌, Vol. 40, p. 163-168, 2003/03
  • Performance and morphology of MgCO3 doped CoO-NiO composite cathode for use in a molten carbonate fuel cell, Takehisa Fukui,Hajime Okawa,Satoshi Ohara,Makio Naito,Kiyoshi Nogi, Kagaku Kogaku Ronbunshu, Society of Chemical Engineers, Vol. 29, No. 2, p. 204-207, 2003
  • Particle size analysis of silica powders in diluted dispersed suspension by ultrasonic attenuation spectroscopy, Hiroya Abe,Makio Naito,Kenji Nakahira,Tadashi Hotta,Yoshio Suzuki,Hiromi Shimada,Kenji Yonekura,Kiminari Kato, Kagaku Kogaku Ronbunshu, Society of Chemical Engineers, Vol. 29, No. 3, p. 442-444, 2003
  • Effect of ink properties of titanium nitride for ink jet printing, Hisanori Yokoyama,Nobuhisa Katoh,Tadashi Hotta,Makio Naito,Shin-Ichi Hirano, Journal of the Ceramic Society of Japan, Ceramic Society of Japan, Vol. 111, No. 1292, p. 262-266, 2003
  • Effect of dewaxing procedures of cold isostatically pressed silicon nitride ceramics on its microstructure and fracture strength, Tadashi Hotta,Hiroya Abe,Takehisa Fukui,Makio Naito,Nobuhiro Shinohara,Keizo Uematsu, Advanced Powder Technology, VSP BV, Vol. 14, No. 5, p. 505-517, 2003
  • Synthesis of metal and ceramic composite particles for fuel cell electrodes, Takehisa Fukui,Satoshi Ohara,Hajime Okawa,Makio Naito,Kiyoshi Nogi, Journal of the European Ceramic Society, Elsevier BV, Vol. 23, No. 15, p. 2835-2840, 2003
  • Applications of Comminution Techniques for the Surface Design of Powder Materials, Naito Makio,Tadashi Hotta,Takehisa Fukui, Key Engineering Materials, Vol. 253, p. 275-292, 2003/01
  • Synthesis of NiO-YSZ Composite Particles for an Electrode of Solid Oxide Fuel Cells by Spary Pyrolysis, Fukui Takehisa,Satoshi Ohara,Makio Naito,Kiyoshi Nogi, Powder Technology, Vol. 132, p. 52-56, 2003/01
  • 新産業創成のキーテクノロジーとしての粒子・粉体構造制御 -ナノ構造からマクロ構造制御まで-, 内藤 牧男,阿部 浩也,福井 武久,大原 智, 粉砕, No. 46, p. 67-72, 2002/12
  • 複合粒子による材料のナノ・ミクロ構造制御, 福井 武久,内藤 牧男,阿部 浩也,横山 豊和, 粉体と工業, Vol. 34, No. 10, p. 41-47, 2002/12
  • セラミックス分野における粉体標準物質, 内藤 牧男,堀田 禎, 粉体と工業, Vol. 34, No. 5, p. 57-63, 2002/12
  • セラミックス製造におけるスラリー特性制御の重要性, 内藤 牧男,阿部 浩也, 月刊 MATERIAL STAGE, Vol. 2, No. 1, p. 80-85, 2002/12
  • Performance and Stability of SOFC anode fabricated from NiO/YSZ composite particles, Fukui Takehisa,Satoshi Ohara,Makio Naito,Kiyoshi Nogi, J.Power Sources, Vol. 110, p. 91-95, 2002/10
  • Effect of Heat Treatment of Alumina Granules on the Compaction Behavior and Properties of Green and Sintered Bodies, Shinohara Nobuhiro,Shigemi Katori,Masataro Okumiya,Tadashi Hotta,Kenji Nakahira,Makio Naito,Yong-Ick Cho,Keizo Uematsu, J.European Ceram.Soc., Vol. 22, p. 2841-2848, 2002/10
  • Development of a Split-type Tensile-strength Tester and Analysis of Mechanism of Increase of Adhesion Behavior of Inorganic Fine Powder Bed at High-Temperature Conditions, Kamiya Hidehiro,Akira Kimura,Toyokazu Yokoyama,Makio Naito,Genji Jimbo, Powder Technology, Vol. 127, p. 239-245, 2002/10
  • Influence of particle size and solid loading on the determination of the isoelectric point (IEP) of ceramics powders by different methods, Abe,H.,M. Naito,R.Waesche,V.Hackley,Y. Hotta, Key Engineering Materials, Vol. 206, p. 3-6, 2002/09
  • Effect of Slurry Flocculation on the Microstructure of Alumina Green Body Prepared by Slip Casting, Hotta Yuji,Hiroya Abe,Makio Naito,Hidehiro Kamiya,Keizo Uematsu, Ceramic Transactions, Am.Ceram.Soc., Vol. 133, p. 159-164, 2002/09
  • Analysis of Anionic Polymer Dispersant in Dense Alumina Suspension with Various Additive Content by Using Colloidal Probe AFM, Kamiya H.,J.Yoneyama,Y. Fukuda,H.Abe,M. Naito, Ceramic Transactions, Vol. 133, p. 65-70, 2002/09
  • Effect of Manufacturing Process on the Properties of Alumina Sintered Ceramics, Cho Yong-Ick,Seung-Jai Kim,Masataro Okumiya,Makio Naito,Keizo Uematsu, Ceramic Transactions, Am.Ceram.Soc., Vol. 133, p. 165-170, 2002/09
  • Fracture Strength Variability of Silicon Nitride Ceramics Made by Powder Compaction, Naito Makio,Hiroya Abe,Tadashi Hotta,Nobuhiro Shinohara,Keizo Uematsu, Ceramic Transactions, Am.Ceram.Soc., Vol. 133, p. 151-157, 2002/09
  • Characterization of Coarse Particles Contained in Fine Powders at Very Low Concentrations, Cho Yong-Ick,Masataro Okumiya,Makio Naito,Torsten Rabe,Rolf Waesche,Roger Morrell,Kevin G. Ewsuk,Vincent Hackley,Stephen Freiman,Keizo Uematsu, Ceramic Transactions, Am.Ceram.Soc., Vol. 133, p. 71-76, 2002/09
  • Measuring the Isoelectric Point of Ceramic Powder Suspensions: A Pre-standardization Study, Hackley Vincent A.,Makio Naito,Rolf Waesche, A Pre-standardization Study, Ceramic Transaction, Am.Ceram.Soc., Vol. 133, p. 17-26, 2002/09
  • Analysis of Anionic Polymer Dispersant Behavior in Dense Silicon Nitride Suspensions with Oxides Additives by Using Colloidal Probe AFM, H.Kamiya,S.Matsui,Y.Fukuda,M.Naito,T.Kakui, Key Engineering Materials, Vol. 206-213, p. 211-214, 2002/09
  • Microstructure of Alumina Compact Body Made by Slip Casting, Takao Yasumasa,Tadashi Hotta,Makio Naito,Nobuhiro Shinohara,Masataro Okumiya,Keizo Uematsu, J.European Ceram.Soc., Vol. 22, p. 397-401, 2002/08
  • Analysis of the High-Temperature Cohesion Behavior of Ash Particles Using Pure Silica Powders Coated with Alkali Metals, Kamiya Hidehiro,Akira Kimura,Myumi Tsukada,Makio Naito, Energy & Fuels, Vol. 16, No. 2, p. 457-461, 2002/02
  • Experimental Study on Zeta Potential and Streaming Potential of Advanced Ceramic Powders, Waesche Rolf,Makio Naito,Vincent A. Hackley, Powder Technology, Vol. 123, p. 275-281, 2002/02
  • カーボンブラック添加によるフライアッシュの力学的特性改善, 情野 香,福井 武久,内藤 牧男,木村 明,神谷 秀博, 化学工学論文集, Vol. 28, p. 224-226, 2002/02
  • Better control of flyash mechanical properties by adding carbon black fine particles, Kaori Jono,Takehisa Fukui,Makio Naito,Akira Kimura,Hidehiro Kamiya, Kagaku Kogaku Ronbunshu, Society of Chemical Engineers, Japan, Vol. 28, No. 2, p. 224-226, 2002
  • Direct Observation of Detrimental Defects in Ceramics, Abe Hiroya,Tadashi Hotta,Makio Naito,Nobuhiro Shinohara,Keizo Uematsu, American Ceramic Society Bulletin, Vol. 81, No. 1, p. 31-34, 2002/01
  • Analysis of the isoelectric point in moderately concentrated alumina suspensions using electroacoustic and streaming potential methods, Vincent A. Hackley,Jason Patton,Lin-Sien H. Lum,Rolf J. Wäsche,Makio Naito,Hiroya Abe,Yuji Hotta,Hemant Pendse, Journal of Dispersion Science and Technology, Vol. 23, No. 5, p. 601-617, 2002
  • Progress of Green Body Characterization in Japan, Naito Makio,Tadashi Hotta,Hiroya Abe,Nobuhiro Shinohara,Yong-Ick Cho,Masataro Okumiya,Keizo Uematsu, Forschrittsberichte der DKG, Vol. 16, No. 2, p. 188-196, 2001/12
  • 電池材料製造における粉体技術, 内藤 牧男,福井 武久, 化学装置, Vol. 43, No. 5, p. 50-55, 2001/12
  • スラリー特性制御による焼結体特性向上への取り組み, 内藤 牧男,阿部 浩也, セラミックス, Vol. 36, No. 5, p. 365-367, 2001/12
  • 還元窒化法によるAlNの合成に及ぼすCaCO3-Y2O3添加の影響, 井出 貴之,米屋 勝利,末廣 隆之,多々見 純一,目黒 竹司,内藤 牧男,堀田 禎,柊平 啓, J.Ceram.Soc.,Japan, Vol. 109, p. 1051-1054, 2001/12
  • Optical Polarization Technique for Observing Filler Packing-structure in the Ceramic-powder Filled Resin Polymer Composite Systems, Takao Yasumasa,Hidehiro Kamiya,Makio Naito,Hideo Okuma, T.IEE Japan, Vol. 121-A, No. 11, p. 1019-1024, 2001/11
  • Fabrication of Composite Particles for Fuel Cell Electrodes by Mechanofusion Technique, T.Fukui,S.Ohara,H.Okawa,T.Hotta,M.Naito,T.Yokoyama,K.Nogi, Reviewde Proceedings of the 3rd International Conference on High Temperatuer Capillarity, p. 481-486, 2001/10
  • Morphology and Performance of SOFC Anode Fabricated from NiO/YSZ Compo- site Particles, Fukui Takehisa,Ohara S.,Naito Makio,Nogi Kiyoshi, J. Chem. Eng. Japan, Vol. 34, No. 7, p. 964-966, 2001/07
  • 顆粒体の圧壊強度に及ぼす雰囲気の影響, 中平 兼司,阿部 浩也,内藤 牧男,篠原 伸広,宮川 直通,神谷 秀博,植松 敬三, 化学工学論文集, Vol. 27, p. 416-418, 2001/06
  • 新ベッセル型機械的粒子複合化装置の特性評価, 堀田 禎,福井 武久,大川 元,大原 智,内藤 牧男,朝日 正三,遠藤 茂寿,野城 清, 粉体工学会誌, Vol. 38, p. 408-413, 2001/06
  • Performance and Morphology of a New Cathode Made from CoO/Ni Composite Particles for MCFCs, Fukui Takehisa,Hotta Tadashi,Okawa Hajime,Ohara Satoshi,Naito Makio,Nogi Kiyoshi, Electrochemistry, Vol. 69, No. 5, p. 335-339, 2001/05
  • Fabrication of Composite Particles for Fuel Cell Electrodes by Mechanofusion Technique, Fukui Takehisa,Ohara Satoshi.,Okawa Hajime.,Hotta Tadashi. Naito Makio,Yokoyama Toyokazu.,Nogi Kiyoshi, Trans. JWRI, Vol. 30, p. 481-486, 2001/04
  • Al2O3還元窒化法によるAlN粉末合成に及ぼすY2O3添加の影響, 井出 貴之,米屋 勝利,多々見 純一,目黒 竹司,内藤 牧男,堀田 禎, J.Ceram.Soc.,Japan, Vol. 109, p. 372-375, 2001/04
  • Origin of Srength Variation of Silicon Nitride Ceramics with CIP Condition in a Powder Compaction Process, Abe Hiroya,Tadashi Hotta,Makio Naito,Nobuhiro Shinohara,Masataro Okumiya,Hidehiro Kamiya,Keizo Uematsu, Powder Technology, Vol. 119, p. 194-200, 2001/03
  • Influence of Additive Content of Anionic Polymer Dispersant on Dense Alumina Suspension Viscosity, Fukuda Yoshiyuki,Tsunetaka Togashi,Yoshio Suzuki,Makio Naito,Hidehiro Kamiya, Chem.Eng.Sci., Vol. 56, p. 3005-3010, 2001/03
  • Contribution of Particle Structure to the Viscosity of SiO2 Particle-filled Epoxy Resin Composite Systems, Takao Yasumasa,Makio Naito,Hidehiro Kamiya, Advanced Powder Technology, Vol. 12, p. 17-31, 2001/02
  • 高速楕円ローター型混合機のローター形状が粒子複合化に及ぼす影響, 堀田 禎,内藤 牧男,Janos Szepvolgyi,遠藤 茂寿,野城 清, 化学工学論文集, Vol. 27, p. 141-143, 2001/02
  • Variation of Microstrucuture and Fracture Strength of Alumina Ceramics Made From Different Slurry Preparing Condition, Abe Hiroya,Tadashi Hotta,Tomohiro Kuroyama,Yoshiyuki Yasutomi,Makio Naito,Hidehiro Kamiya,Keizo Uematsu, Ceramic Transactions, Am.Ceram.Soc., Vol. 112, p. 809-814, 2001/01
  • Porous Alumina with a Double-Layered Structure Fabricated by Pore-Controlled In Situ Solidification, Takahashi M.,T. Mizuno,Y. Shiroki,T. Yokoyama,H. Abe,M. Naito, Ceramic Transactions, Am.Ceram.Soc., Vol. 112, p. 559-564, 2001/01
  • Alumina Prepared by In Situ Solidification Forming Technique Using pH Controlled Slurry, Jono Kaori,Tadashi Hotta,Hiroya Abe,Makio Naito,Minoru Takahashi, Ceramic Transactions, Am.Ceram.Soc., Vol. 112, p. 459-464, 2001/01
  • Effect of pH on Dense Alumina Suspension with Anionic Polymer Dispersant, Fukuda Yoshiyuki,Hiromi Ishii,Hidehiro Kamiya,Hiroya Abe,Makio Naito, Ceramic Transactions, Am.Ceram.Soc., Vol. 112, p. 197-202, 2001/01
  • Analysis of electrosteric interaction of polymer dispersant in dense alumina suspensions with different counter-ion densities using an atomic force microscope, Yoshiyuki Fukuda,Tsunetaka Togashi,Makio Naito,Hidehiro Kamiya, Journal of the Ceramic Society of Japan, Ceramic Society of Japan, Vol. 109, No. 1270, p. 516-520, 2001
  • Morphology control of the electrode for Solid Oxide Fuel Cells by using nanoparticles, Takehisa Fukui,Satoshi Ohara,Makio Naito,Kiyoshi Nogi, Journal of Nanoparticle Research, Vol. 3, No. 2-3, p. 171-174, 2001
  • Origin of the strength change of silicon nitride ceramics with the alteration of spray drying conditions, Tadashi Hotta,Kenji Nakahira,Makio Naito,Nobuhiro Shinohara,Masataro Okumiya,Keizo Uematsu, Journal of the European Ceramic Society, Elsevier BV, Vol. 21, No. 5, p. 603-610, 2001
  • Infrared Microscopy for Innovative Research in Ceramics, Uematsu Keizo,Takumi Sato,Daisuke Shoji,Nozomu Uchida,Zenji Kato,Satoshi Tanaka,Makio Naito,Tadashi Hotta, Ceramic Transactions, Am.Ceram.Soc., Vol. 122, p. 157-171, 2001/01
  • Particulate Structural Contribution to Viscosity of Aluminum Nitride Particle Filled Epoxy Resin Composite System, Takao Yasumasa,M. Naito,T. Tatsumi,T. Sakurai, Ceramic Processing Science VI,Ceramic Transactions, Am.Ceram.Soc., Vol. 112, p. 507-512, 2001/01
  • Fabrication of Functional Gradient Material of Si3N4-TiN System by Ink Jet Printing, Yokoyama Hisanori.,Nobuhisa Kato,Tadashi Hotta,Makio Naito,Shin-ichi Hirano, Ceramic Processing Science VI,Ceramic Transactions, Am.Ceram.Soc., Vol. 112, p. 363-368, 2001/01
  • Infrared Microscopy for Examination of Structure in Spray-Dried Granules and Compacts, Keizo Uematsu,Nozomu Uchida,Zenji Kato,Satoshi Tanaka,Tadashi Hotta,Makio Naito, Journal of the American Ceramic Society, American Ceramic Society, Vol. 84, No. 1, p. 254-256, 2001
  • Synthesis of CoO/Ni Composite Powders for Molten Carbonate Fuel Cells, Takehisa Fukui,Hajime Okawa,Tadashi Hotta,Makio Naito,Toyokazu Yokoyama, Journal of the American Ceramic Society, American Ceramic Society, Vol. 84, No. 1, p. 233-235, 2001
  • Relevance of the fracture strength to process-related defects in alumina ceramics, M. Naito,T. Hotta,H. Abe,N. Shinohara,Y. I. Cho,M. Okumiya,K. Uematsu, Materials Transactions, Japan Institute of Metals (JIM), Vol. 42, No. 1, p. 114-119, 2001
  • 粉体・微粒子構造制御技術の進歩と展望, 内藤 牧男,堀田 禎, M&E, Vol. 27, No. 8, p. 154-161, 2000/12
  • セラミックス製造技術向上のための評価技術, 内藤 牧男,堀田 禎, セラミックデータブック2000、工業と製品, Vol. 28, No. 82, p. 109-113, 2000/12
  • ミリ波誘電体特性国際標準化に向けて, 小林 禧夫,東田 豊,内藤 牧男, セラミックス, Vol. 35, No. 6, p. 462-464, 2000/12
  • ファインセラミックスの技術基盤構築と粉体工学, 内藤 牧男, 粉体工学会誌, Vol. 37, No. 2, p. 134-139, 2000/12
  • 超音波法による濃厚スラリーの特性評価, 遠藤 茂寿,内藤 牧男, 超音波TECHNO, Vol. 12, No. 2, p. 27-31, 2000/12
  • Origin of the Fracture Strength Variation in Silicon Nitride Ceramics, Abe Hiroya,Tadashi Hotta,Makio Naito,Nobuhiro Shinohara,Masataro Okumiya,Keizo Uematsu, Proceedings of Second International Conference on Processing Materials for Properties, p. 393-396, 2000/11
  • Origin of the Fracture Strenght Variation in Silicon Nitride Ceramics, H.Abe,T.Hotta,M.Naito,N.Shinohara,m.Okumiya,K.Uematsu, Proceedings of Second International Conference on Processing Materials for Properties, p. 393-396, 2000/11
  • Analysis of High Temperature Cohesion of Ash Particles Using Model Pure Silica Powders Coated with Alkali Metals, Kamiya H.,A.Kimura,M.Naito, Preprints of Symposia,Division of Fuel Chemistry, Vol. 45, No. 3, p. 564-567, 2000/08
  • Morphological Changes in Process-Related Large Pores of Granular Compacted and Sintered Alumina, Shinohara Nobuhiro,Masataro Okumiya,Tadashi Hotta,Kenji Nakahira,Makio Naito,Keizo Uematsu, J.Am.Ceram.Soc., Vol. 83, No. 7, p. 1633-1640, 2000/07
  • 粒子要素法による高速楕円ローター型混合機内における粒子の運動シミュレーション, 遠藤 茂寿,Janos Szepvolgyi,林 高弘,内藤 牧男,谷本 友秀, 化学工学論文集, Vol. 26, No. 2, p. 268-274, 2000/04
  • Particle Aggregated Strucuture in Silica Particle Filled Epoxy Resin Composite System, Takao Yasumasa,Makio Naito, J.Chem.Eng.,Japan, Vol. 33, No. 2, p. 317-322, 2000/02
  • 窒化ケイ素焼結体の破壊源に及ぼす顆粒体特性の影響, 中平 兼司,堀田 禎,内藤 牧男,篠原 伸広,奥宮 正太郎,植松 敬三, J.Ceram. oc.,Japan, Vol. 108, No. 2, p. 161-165, 2000/02
  • 高速楕円ローター型混合機の粒子複合化に及ぼす微粒子径の影響, 内藤 牧男,堀田 禎,谷本 友秀,遠藤 茂寿,野城 清, 化学工学論文集, Vol. 26, No. 1, p. 62-67, 2000/02
  • Variation of the microstructure and fracture strength of cold isostatically pressed alumina ceramics with the alteration of dewaxing procedures, Nobuhiro Shinohara,Masataro Okumiya,Tadashi Hotta,Kenji Nakahira,Makio Naito,Keizo Uematsu, Journal of the European Ceramic Society, Elsevier BV, Vol. 20, No. 7, p. 843-849, 2000
  • Properties of NiO cathode coated with lithiated Co and Ni solid solution oxide for MCFCs, Takehisa Fukui,Satoshi Ohara,Hajime Okawa,Tadashi Hotta,Makio Naito, Journal of Power Sources, Elsevier Sequoia SA, Vol. 86, No. 1, p. 340-346, 2000
  • Processing defects and their relevance to strength in alumina ceramics made by slip casting, Yasumasa Takao,Tadashi Hotta,Kenji Nakahira,Makio Naito,Nobuhiro Shinohara,Masataro Okumiya,Keizo Uematsu, Journal of the European Ceramic Society, Elsevier BV, Vol. 20, No. 4, p. 389-395, 2000
  • Optical Characterization of Strength-Limiting Flaws in Silicon Nitride Ceramics Prepared with Different Slurry Flocculation Conditions, Naito Makio,Tadashi Hotta,Hiroya Abe,Nobuhiro Shinohara,Masataro Okumiya,Keizo Uematsu, British Ceramic Proceedings 61, The Institute of Materials, Vol. 61, p. 119-132, 2000/01
  • 粒子径分布測定における基礎知識, 中平 兼司,内藤 牧男, セラミックス, Vol. 34, No. 10, p. 830-833, 1999/12
  • セラミックスの成形と焼結における粉体特性の重要性, 米屋 勝利,目黒 竹司,多々見 純一,内藤 牧男, セラミックス, Vol. 34, No. 10, p. 816-820, 1999/12
  • 粉体・プロセス関連試験評価方法開発の動向, 内藤 牧男, セラミックス, Vol. 34, No. 4, p. 303-307, 1999/12
  • セラミックス製造における粒子の大きさ・形態評価の重要性, 内藤 牧男,堀田 禎, 粉体と工業, Vol. 31, No. 3, p. 52-60, 1999/12
  • 標準物質とその役割, 内藤 牧男,馬場 哲也, セラミックス, Vol. 34, No. 3, p. 150-153, 1999/12
  • Preparation and Characterizaiton of NiO-YSZ, (La,Sr)MnO3-YSZ, CoO-Ni Composite Powders for Fuel Cells, Fukui Takehisa,Satoshi Ohara,Hajime Okawa,Makio Naito, 1999 Fine Powder International Conference Proceedings, p. 257-263, 1999/12
  • New Techniques for Characterization of Powder Properties for Improving Ceramic Properties, Naito Makio,Tadashi Hotta,Yasumasa Takao,Nobuhiro Shinohara,Masataro Okumiya,Keizo Uematsu, 1999 Fine Powder International Conference Proceedings, p. 192-198, 1999/12
  • Microscopic Analysis of Electrosteric Interaction of Anionic Polymer Dispersant in Dense Ceramics Suspension by Using AFM, Kamiya Hidehiro,Yoshiyuki Fukuda,Mayumi Tsukada,Toshio Kakui,Makio Naito, 1999 Fine Powder International Conference Proceedings, p. 184-191, 1999/12
  • Electrokinetic Characterization of Aqueous Ceramic Suspensions, Waesche Rolf,Makio Naito, 1999 Fine Powder Processing International Conference Proceedings, p. 177-183, 1999/12
  • Seasonal Variation of Microstrucutre and Sintered Strength of Dry-Pressed Alumina, Shinohara Nobuhiro,Masataro Okumiya,Tadashi Hotta,Kenji Nakahira,Makio Naito,Keizo Uematsu, J.Am.Ceram.Soc., Vol. 82, No. 12, p. 3441-3446, 1999/12
  • Effect of Polymer Dispersant Strucuture on Electrosteric Interaction and Dense Alumina Suspension Behavior, Kamiya Hidehiro,Yoshiyuki Fukuda,Yoshio Suzuki,Mayumi Tsukada,Toshio Kakui,Makio Naito, J.Am.Ceram.Soc., Vol. 82, No. 12, p. 3407-3412, 1999/12
  • 窒化チタンスラリー特性が成形並びに焼結挙動に与える影響, 横山 久範,加藤 布久,野村 貴徳,堀田 禎,中平 兼司,内藤 牧男,坂本 渉,平野 眞一, J.Ceram. oc.,Japan, Vol. 107, No. 10, p. 968-972, 1999/10
  • Effect of Seasons on Density, Strength of Alumina, Shinohara Nobuhiro,Masataro Okumiya,Tadashi Hotta,Kenji Nakahira,Makio Naito,Keizo Uematsu, Am.Ceram.Soc.Bull., Vol. 78, No. 2, p. 81-84, 1999/02
  • 高速楕円型ローター回転型復合化装置により形成される複合粒子層の評価, 遠藤 茂寿,古屋仲 茂樹,幡野 博之,谷本 友秀,内藤 牧男, 化学工学論文集, Vol. 25, No. 1, p. 92-98, 1999/02
  • Formation mechanisms of processing defects and their relevance to the strength in alumina ceramics made by powder compaction process, N. Shinohara,M. Okumiya,T. Hotta,K. Nakahira,M. Naito,K. Uematsu, Journal of Materials Science, Kluwer Academic Publishers, Vol. 34, No. 17, p. 4271-4277, 1999
  • Origin of strength change in ceramics associated with the alteration of spray dryer, T. Hotta,K. Nakahira,M. Naito,N. Shinohara,M. Okumiya,K. Uematsu, Journal of Materials Research, Materials Research Society, Vol. 14, No. 7, p. 2974-2979, 1999
  • Structural Flaw Evaluation in Green Compacts and Ceramics by an Optical Method - For Understanding the Origin of Strength Variation in Ceramics -, Uematsu,K.,Y.Zhang,N.Uchida,T.Hotta,M.Naito,N.Shinohara,M.Okumiya, Key Engineering Materials, Vol. 161-163, p. 145-150, 1999/01
  • Experimental Analysis on Sample Preparation Conditions for Particle Size Measurement, Hayakawa Osamu,Kenji Nakahira,Makio Naito,Jun-ichiro Tsubaki, Powder Technology, Vol. 100, p. 61-68, 1998/12
  • Effect of Particle Shape on the Particle Size Disitribution Measured with the Commercial Equipment, Naito Makio,Osamu Hayakawa,Kenji Nakahira,Hidetoshi Mori,Jun-ichiro Tsubaki, Powder Technology, Vol. 100, p. 52-60, 1998/12
  • メカノフュージョンによる複合粒子の一評価法, 田中 俊成,吉川 雅浩,近藤 光,内藤 牧男,野城 清, 複合微粒子合成法の評価とその応用, p. 13-18, 1998/08
  • 窒化ケイ素粉体に含まれる微量粗大粒子の粉砕に及ぼすボールミル処理条件の影響, 内藤 牧男,堀田 禎,早川 修,篠原 伸広,植松 敬三, J.Ceram.Soc.,Japan,, Vol. 106, No. 8, p. 811-814, 1998/08
  • Simulation of Slip Casting Process Based on the Centrifugal Consolidation Method, Mori Hidetoshi,Yoshifumi Yoshida,Jun-ichiro Tsubaki,Toyokazu Yokoyamaand Makio Naito, Proceedings of World Congress on Particle Technology, Brighton, Vol. 72, p. 1-11, 1998/07
  • Deformation Behavior Design of Spray-dried Granules - Suspension Properties Control before Spray-dring -, Kamiya Hidehiro,Yoshio Suzuki,Yoshiyuki Fukuda,Makio Naito,Tadashi Hotta,Nobuhiro Shinohara,Masataro Okumiya,Keizo Uematsu, Proceedings of Wolrd Congress on Particle Technology, Brgihton, Vol. 105, p. 1-9, 1998/07
  • Analysis of a Fracture Origin in Cramics by Observing its Internal Structure, Hotta Tadashi,Kenji Nakahira,Makio Naito,Nobuhiro Shinohara,Masataro Okumiya,Keizo Uematsu, Proceedings of World Congress on Particle Technology, Brighton, Vol. 254, p. 1-9, 1998/07
  • Process to Create Composite Particles by Dry Mechanical Method, Naito Makio,Tadashi Hotta,Shozo Asahi,Tomohide Tanimoto, Proceedings of World Congress on Particle Technology, Brighton, Vol. 365, p. 1-9, 1998/07
  • 湿式成形プロセス最適設計のための新たなスラリー評価法(第1報) -遠心圧密挙動の時間依存性-, 椿淳 一郎,吉田 宜史,四方 雅人,森 英利,横山 豊和,内藤 牧男, J.Ceram.Soc.,Japan, Vol. 106, No. 5, p. 504-508, 1998/05
  • 熱拡散率標準物質の開発に関する研究, 小川 光恵,馬場 哲也,向井 一夫,内藤 牧男, Netsu Bussei, Vol. 12, No. 3, p. 114-119, 1998/03
  • 高速楕円ローター型混合機の粒子複合化に及ぼす粒子処理条件の影響, 内藤 牧男,堀田 禎,朝日 正三,谷本 友秀,遠藤 茂寿, 化学工学論文集, Vol. 24, p. 99-103, 1998/02
  • 高速楕円ローター型混合機による粒子表面への微粒子複合化過程, 内藤 牧男,堀田 禎,朝日 正三,谷本 友秀, 化学工学論文集, Vol. 24, p. 52-56, 1998/02
  • Microscopic analysis on the consolidation process of granule beds, Makio Naito,Kenji Nakahira,Tadashi Hotta,Akinobu Ito,Toyokazu Yokoyama,Hidehiro Kamiya, Powder Technology, Elsevier Science S.A., Vol. 95, No. 3, p. 214-219, 1998
  • Preparation of Si3N4 Powder from the System SiO2-C-N2 with Si3N4 Seed, In Ho Kang,Katsutoshi Komeya,Takeshi Meguro,Makio Naito,Osamu Hayakawa, J.Ceram.Soc.,Japan, Vol. 106, p. 30-34, 1998/01
  • 溶射分野における粉体技術の役割, 内藤 牧男,堀田 禎, 溶射, Vol. 34, No. 4, p. 222-230, 1997/12
  • 粉砕の進歩と展望, 内藤 牧男, 化学工学, Vol. 61, No. 4, p. 264-266, 1997/12
  • 液中における粉体分散状態の評価法, 内藤 牧男, セラミックス, Vol. 32, No. 4, p. 287-291, 1997/12
  • Powder Processing for Fabricating Si3N4 Ceramics, Kamiya Hidehiro,Makio Naito,Tadashi Hotta,Kenji Isomura,Jun-ichiro Tsubaki,Keizo Uematsu, Am.Ceram.Soc.Bull., Vol. 76, No. 10, p. 79-82, 1997/10
  • Process Conditions on the Preparation of Supported Microporous SiO2 Membranes by Sol-Gel Modification Techniques, Naito Makio,Kenji Nakahira,Yoshiyuki Fukuda,Hidetoshi Mori,Jun-ichiro Tsubaki, J.of Membrane Science, Vol. 129, p. 263-269, 1997/03
  • Optimization of Suspension Characteristics for Shaping Processes, Naito Makio,Yoshiyuki Fukuda,Norihiro Yoshikawa,Hidehiro Kamiya,Jun-ichiro Tsubaki, J.European Ceram.Soc., Vol. 17, p. 251-257, 1997/03
  • Characterized Microstructure of Porous Si3N4 Compacts Prepared using the Pyrolysis of Polysilazane, Tsubaki Jun-ichiro,Hidetoshi Mori,Kohichi Ayama,Tadashi Hotta,Makio Naito, J.of Membrane Science, Vol. 129, p. 1-8, 1997/01
  • フロー式粒子像分析装置による凝集粒子構造の直接観察, 森 英利,吉田 宜史,椿淳 一郎,内藤 牧男,早川 修, 粉砕, No. 40, p. 4-11, 1996/12
  • 顆粒体、成形体特性と微粒子分散系制御技術, 内藤 牧男, 粉体と工業, Vol. 28, No. 8, p. 61-70, 1996/12
  • IEA・AnnexIIの国際共同研究, 水野 峰男,内藤 牧男, セラミックス, Vol. 31, No. 5, p. 401-403, 1996/12
  • 微粒子無機材料工学の新展開, 内藤 牧男, 化学装置, Vol. 38, No. 5, p. 32-39, 1996/12
  • Effect of Silicon Nitride Seeds Addition on the Particle Size and the Crystal Form of Resulting Powder in Carbothermal Reduction-Nitridation of Silica, In Ho Kang,Katsutoshi Komeya,Takeshi Meguro,Makio Naito,Osamu Hayakawa, J.Ceram.Soc.,Japan, Vol. 104, p. 471-475, 1996/06
  • 機械的撹拌下における粒子界面の温度評価, 野城 清,内藤 牧男,近藤 光,中平 敦,新原 晧一,横山 豊和, 粉体および粉末冶金, Vol. 143, p. 396-401, 1996/03
  • 粉砕技術の最近の動向, 内藤 牧男,福田 悦幸, PHARM TECH JAPAN, Vol. 11, No. 13, p. 69-80, 1995/12
  • 噴霧乾燥法による顆粒体設計 -成形体微構造制御のためのスラリー調製-, 内藤 牧男,福田 悦幸, ケミカル・エンジニヤリング, Vol. 40, No. 10, p. 40-47, 1995/12
  • レーザー回折・散乱法における入力光学特性値が粒子径分布測定結果に及ぼす影響, 早川 修,安田 佳弘,内藤 牧男,椿淳 一郎, 粉体工学会誌, Vol. 32, No. 11, p. 796-803, 1995/11
  • 噴霧乾燥法により作製された顆粒体ならびに成形体特性に及ぼすスラリー調製条件の影響, 内藤 牧男,福田 悦幸,吉川 宣弘,神谷 秀博,椿淳 一郎, 粉体工学会誌, Vol. 32, No. 9, p. 617-623, 1995/09
  • Creep Failure Process for Fine Powder Beds by Tensile Loading, Hidehiro Kamiya,Makio Naito,JunIchiro Tsubaki,Genji Jimbo, KONA Powder and Particle Journal, Vol. 13, p. 223-231, 1995
  • Effect of mechanical stirring of YBaCuO mixed powder during heat treatment on superconductive properties, Makio Naito,Toyokazu Yokoyama,Akira Kondo,Hidehiro Kamiya,Toshio Iwahara,Masayuki Kobayashi,Genji Jimbo, Advanced Powder Technology, Vol. 6, No. 2, p. 103-110, 1995
  • 「特別記事」、粉体製造コスト低減と高品質化, 内藤 牧男, 化学装置, Vol. 36, No. 11, p. 29-39, 1994/12
  • 「特集」粒子の機能化・複合化技術、機械的粒子複合化技術の現状と展望, 内藤 牧男, 粉体と工業, Vol. 26, No. 5, p. 31-42, 1994/12
  • Effect of Y2BaCu05 particle size on the properties of YBa2Cu3O7-x superconductor, Kamiya Hidehiro,Akira Kondo,Toyokazu Yokoyama,Makio Naito,Genji Jimbo,Shigeo Nagaya,Mashamiti Miyajima,Izumi Hirabayashi, Advanced Powder Technology, Vol. 5, No. 4, p. 339-351, 1994/08
  • 微粉体層のクリープ引張り破断過程, 神谷 秀博,神保 元二,内藤 牧男,椿淳 一郎, 化学工学論文集, Vol. 20, No. 4, p. 556-563, 1994/08
  • 機械的粒子復合化に及ぼす操作条件の検討, 近藤 光,内藤 牧男,横山 豊和, 粉体工学会誌, Vol. 31, No. 7, p. 490-492, 1994/07
  • Creep Failure Process for Fine Powder Beds by Tensile Loading, Hidehiro Kamiya,Genji Jimbo,Makio Naito, KAGAKU KOGAKU RONBUNSHU, Vol. 20, No. 4, p. 556-563, 1994
  • 粉体工学講座、I.最近の微粒子製造技術、第4章均質化・複合化(4)4.2複合化(3), 内藤 牧男, 粉体工学会誌, Vol. 30, No. 5, p. 350-354, 1993/12
  • 粉体工学講座、I.最近の微粒子製造技術、第4章均質化・複合化(3)4.2複合化(2), 内藤 牧男, 粉体工学会誌, Vol. 30, No. 4, p. 268-276, 1993/12
  • 高真空剪断型ミルを用いた2重被覆型および多相分散被覆型複合粒子の調製, 丹野 浩一,小名木 忠志,内藤 牧男,横山 豊和, 粉体工学会誌, Vol. 30, No. 6, p. 416-422, 1993/06
  • Analysis of the Powder Composite Process by a Mechanical Method, Makio Naito,Masahiro Yoshikawa,Toshinari Tanaka,Akira Kondo, KONA Powder and Particle Journal, Vol. 11, p. 229-234, 1993
  • Applications of Comminution Techniques for the Surface Modification of Powder Materials, Makio Naito,Akira Kondo,Toyokazu Yokoyama, ISIJ International, Vol. 33, No. 9, p. 915-924, 1993
  • 機械的粒子復合化過程に及ぼす操作条件ならびに粒径の影響, 内藤 牧男,近藤 光,吉川 雅浩,横山 豊和, 粉体工学会誌, Vol. 30, No. 1, p. 32-37, 1993/01
  • 機械的手法による粒子復合化過程の解析, 内藤 牧男,吉川 雅浩,田中 俊成,近藤 光, 粉体工学会誌, Vol. 29, No. 6, p. 434-439, 1992/06
  • Silver Sheathed Superconducting Tapes Made from the Bi-System Oxide Powders Mixedwith Metal Agor Cu Powders, T. Asano,Y. Tanaka,M. Fukutomi,K. Komori,K. Inoue,H. Maeda,M. Yoshikawa,M. Naitoh, IEEE Transactions on Magnetics, Vol. 28, No. 1, p. 884-887, 1992
  • YBaCu系複合酸化物製造プロセスにおける液中混合粉砕が製品の超伝導特性に及ぼす影響, 横山 豊和,吉田 宜史,近藤 光,内藤 牧男,吉川 雅浩,神谷 秀博,神保 元二, 粉体工学会誌, Vol. 28, No. 8, p. 501-507, 1991/08
  • 粉体処理技術の動向 -粉体物性測定法, 内藤 牧男, 機械設計, Vol. 34, No. 12, p. 88-93, 1990/12
  • 「特集」粉体機器・装置の技術動向と未来技術、粉体の物性測定技術, 内藤 牧男, 化学装置, Vol. 32, No. 9, p. 42-49, 1990/12
  • メカノフュージョンの新素材開発への応用 -超電導材料、金属・セラミックス複合素材など-, 内藤 牧男,吉川 雅浩, 粉砕, No. 34, p. 107-116, 1990/12
  • 乾式振動ボールミル処理がYBaCu系複合酸化物の超伝導特性に及ぼす影響, 横山 豊和,近藤 光,内藤 牧男,吉川 雅浩,神谷 秀博,神保 元二, J.Ceram.Soc.,Japan, Vol. 98, No. 10, p. 1097-1102, 1990/10
  • Effects of Milling Times and Conditions on the Superconducting Properties of YBaCuO Composite Materials, Yokoyama Toyokazu,Yoshifumi Yoshida,Akira Kondo,Hidehiro Kamiya,Genji Jimbo,Makio Naito,Masahiro Yoshikawa, Proceedings of the Second World Congress PARTICLE TECHNOLOGY,PartII, p. 548-555, 1990/09
  • Production of Superconductive Oxides by Dry Mechanical Method, Naito Makio,Masahiro Yoshikawa,Tsutom Yotsuya,Hisashi Sekine,Toshihisa Asano,Hiroshi Maeda, Proceedings of the Second World Congress PARTICLE TECHNOLOGY,PartIII, p. 424-431, 1990/09
  • The Release of Enzymes and Proteins from Baker's Yeast Disrupted by a Agitator Bead Mill”, Kanji Matsumoto,Haruhiko Ohya,Sadam Ito,Makio Naito, KONA Powder and Particle Journal, Vol. 8, p. 31-38, 1990
  • Preparation of Bi(Pb)SrCaCuO Thin Film with High-Tc Phase, Yotsuya Tsutom,Yoshihiko Suzuki,Soichi Ogawa,Hirofumi Imokawa,Masahiro Yoshikawa,Makio Naito,Kohei Otani, Advances in Cryogenic Engineering (Materials), Vol. 36, p. 565-572, 1990/01
  • 摩砕型ミルを利用した酸化物超伝導体の作製, 内藤 牧男,吉川 雅浩,四谷 任, 粉体および粉末冶金, Vol. 37, No. 1, p. 131-133, 1990/01
  • Applications of Mechanofusion System for the Production of Superconductive Oxides, Naito Makio,Masahiro Yoshikawa, Applications of Mechanofusion System for the Production of Superconductive Oxides, No. 7, p. 119-122, 1989/12
  • メカノフュージョンシステム -微粒子複合新素材創造技術-, 内藤 牧男, 粉体と工業, Vol. 21, No. 9, p. 76-82, 1989/12
  • 乾式粉砕機の分散技術へのアプローチ, 内藤 牧男,吉川 雅浩, 粉体と工業, Vol. 21, No. 7, p. 50-56, 1989/12
  • 「特集」多機能・高精度化進む粉粒体機器装置、先端材料分野で注目されるメカノフュージョンシステム, 内藤 牧男, 化学装置, Vol. 31, No. 5, p. 34-39, 1989/12
  • 複合粒子の特性評価, 内藤 牧男,彼谷 憲美, 粉砕, No. 33, p. 66-71, 1989/12
  • 解説II 粉体処理技術の動向、粉体物性測定法, 内藤 牧男, 機械設計, Vol. 33, No. 5, p. 105-113, 1989/12
  • Fabrication of Bi(Pb)SrCaCuO Thin Film of High-TC Phase, Yotsuya Tsutom,Yoshihiko Suzuki,Soichi Ogawa,Hirofumi Imokawa,Masahiro Yoshikawa,Makio Naito,Ryoichi Takahata,Kohei Otani, Japanese Journal of Applied Physics, Vol. 28, No. 6, p. 972-974, 1989/06
  • ビーズミルによる酵母内酵素および蛋白質の放出特性, 松本 幹治,伊藤 定,大矢 晴彦,内藤 牧男, 粉体工学会誌, Vol. 26, No. 6, p. 424-429, 1989/06
  • 環状多槽型ビーズミルによる珪砂の破砕特性, 松本 幹治,西沢 均,内藤 牧男, 粉体工学会誌, Vol. 26, No. 6, p. 417-423, 1989/06
  • Bi-Pb-Sr-Ca-Cu-O薄膜の作製(1), 吉川 雅浩,内藤 牧男,妹川 博文,大谷 光平,四谷 任,鈴木 義彦, 真空, Vol. 32, No. 3, p. 255-258, 1989/03
  • Fabrication of BSCCO Thin Films (l), Masahiro Yoshikawa,Makio Naito,Hirofumi Imokawa,Kohei Otani,Tsutomu Yotsuya,Yoshihiko Suzuki,Soichi Ogawa, Shinku, Vol. 32, No. 3, p. 255-258, 1989
  • 粉体層の力学的特性の変化過程に関する研究, 内藤 牧男, 粉体工学会誌, Vol. 25, No. 4, p. 239-241, 1988/12
  • 「特別企画」粉体の製法と粒度測定, 内藤 牧男, ニューセラミックス, Vol. 1, No. 7, p. 37-46, 1988/12
  • メカノフュージョンシステムによる粒子加工技術, 内藤 牧男, 産業機械, No. 452, p. 26-29, 1988/12
  • 「特集」フレッシュマンのための粉体プラントの設計・入門 フレッシュマンが知っておきたい粉体の物性と現象, 横山 藤平,内藤 牧男, 化学装置, Vol. 30, No. 3, p. 46-56, 1988/12
  • メカノフュージョンシステムとその応用, 横山 藤平,浦山 清,内藤 牧男,加藤 正史, 粉砕, No. 32, p. 78-85, 1988/12
  • The effect of the ultra-fine solid additives on the mechanical properties of a powder bed, Makio Naito,Naoki Kato,Genji Jimbo, KONA Powder and Particle Journal, Vol. 6, p. 30-38, 1988
  • The Angmill Mechanofusion System and its Applications, Yokoyama Tohei,Kiyoshi Urayama,Makio Naito,Masashi Kato,Toyokazu Yokoyama, KONA, No. 5, p. 59-68, 1987/12
  • 固体添加剤による粉体層の力学的性質の変化, 内藤 牧男,臼田 悟,椿淳 一郎,神保 元二, 粉体工学会誌, Vol. 24, No. 8, p. 527-534, 1987/08
  • 超微粉添加剤による粉体層の力学的性質の変化, 内藤 牧男,臼田 悟,加藤 尚樹,椿淳 一郎,神保 元二, 粉体工学会誌, Vol. 24, No. 7, p. 455-461, 1987/07
  • 粉体層の引張り破断に要する変位,エネルギに及ぼす固体添加剤の影響, 内藤 牧男,臼田 悟,神保 元二, 化学工学論文集, Vol. 12, No. 4, p. 495-497, 1986/08
  • 粉体層の引張り強さに及ぼす超微粉添加剤の影響, 内藤 牧男,加藤 尚樹,神保 元二,横山 藤平, 粉体工学会誌, Vol. 23, No. 7, p. 500-506, 1986/07
  • 粉体の力学的挙動に及ぼす助剤,添加剤の効果と機械的操作への応用, 内藤 牧男,神保 元二, 粉砕, No. 29, p. 104-114, 1985/12
  • 疲労限度以下のくり返し引張り応力による粉体層の力学的挙動, 内藤 牧男,椿淳 一郎, 粉体工学会誌, Vol. 22, No. 1, p. 17-19, 1985/01
  • 捕集粉塵層の剪断方向払い落とし -衝突加速度による払い落とし-, 内藤 牧男,椿淳 一郎,神保 元二, 化学工学論文集, Vol. 10, No. 6, p. 744-750, 1984/12
  • Shearing Direction Dislodgement of Deposited Dust Layer on Fabric Filter: –Dislodgement by impaction acceleration–, Makio Naito,Jun-Ichiro Tsubaki,Genji Jimbo, Kagaku Kogaku Ronbunshu, Vol. 10, No. 6, p. 744-750, 1984
  • Preparation of CoLaO3 catalyst fine particles by mist decomposition method II effect of additives for the increase of surface area, H. Imai,K. Takami,M. Naito, Materials Research Bulletin, Vol. 19, No. 10, p. 1293-1300, 1984
  • 捕集粉塵層の垂直応力による払い落とし -パルス的逆圧による払い落とし-, 椿淳 一郎,向坂 文雄,内藤 牧男,神保 元二, 化学工学論文集, Vol. 9, No. 2, p. 226-228, 1983/04
  • 捕集粉塵層の垂直応力による払い落とし -衝突加速度による払い落とし-, 椿淳 一郎,内藤 牧男,田上 晴雄,向坂 文雄,神保 元二, 化学工学論文集, Vol. 8, No. 4, p. 481-486, 1982/08
  • Dislogdement of Deposited Dust Layer on Fabric Filter by Normal Stress: Dislodgement by impaction acceleration, Jun-Ichiro Tsubaki,Genji Jimbo,Makio Naito,Haruo Tagami,Fumio Kousaka, KAGAKU KOGAKU RONBUNSHU, Vol. 8, No. 4, p. 481-486, 1982

Misc.

  • Improvement of Mechanical Properties of Geopolymer Produced from Mechanically Activated Coal Fly Ash, Mitsuaki Matsuoka,Kohei Okura,Norhihiro Murayama,Makio Naito, 8th International Congress on Ceramics (ICC8), Virtual, Korea, 2021/04
  • Synthesis of anisotropic nanoparticles by wet planetary ball milling, Takahiro Kozawa,Kayo Fukuyama,Akira Kondo,Makio Naito, 8th International Congress on Ceramics (ICC8) , Virtual, Korea, 2021/04
  • 表面コーティング LNMO/LTO リチウムイオン電池のガス抑制効果, 今泉 純一、今﨑 充康、菊池 剛、福山 香代、小澤 隆弘、内藤 牧男, 第61回電池討論会, オンライン, 2020/11
  • 湿式メカニカル法による異方性ナノ粒子の合成と高電位正極材料への展開, 樽美 良紀、小澤 隆弘、内藤 牧男, 粉体工学会2020年度秋期研究発表会, 東京+オンライン, 2020/11
  • 液中ボールミル粉砕実験結果のDEMシミュレーションを用いた解析, 近藤 光、石原 真吾、久志本 築、小澤 隆弘、加納 純也、内藤 牧男, 日本セラミックス協会 第33回秋季シンポジウム, (オンライン開催), 2020/09
  • 湿式遊星ボールミルによる異方形状を有するリン酸アンモニウム塩の合成, 小澤 隆弘、福山 香代、近藤 光、内藤 牧男, 日本セラミックス協会 第33回秋季シンポジウム, (オンライン開催), 2020/09
  • ジオポリマー硬化体の圧縮強度および耐酸性におよぼすフライアッシュ粒子への機械的処理の効果, 松岡 光昭、大倉 滉平、村山 憲弘、内藤 牧男, 粉体工学会2020年度春期研究発表会, 姫路, 2020/05
  • ジオポリマー硬化体の圧縮強度および耐酸性におよぼすフライアッシュ粒子への機械的処理の効果, 松岡 光昭、大倉 滉平、村山 憲弘、内藤 牧男, 化学工学会第85年会, 大阪, 2020/03
  • チタニアナノ粒子を用いたステンレス表面への微生物の付着抑制, 田中 智彦、小西 康裕、野村 俊之、近藤 光、内藤 牧男, 化学工学会第85年会, 大阪, 2020/03
  • ジオポリマーの硬化反応におよぼすフライアッシュ粒子への機械的処理の効果, 松岡 光昭、大倉 滉平、村山憲 弘、内藤 牧男, 化学工学会第85年会, 大阪, 2020/03
  • Relationship between Grinding Results in Wet Ball Milling and the Analysis of Ball Motions using DEM Simulation, Akira Kondo,Shingo Ishihara,Kizuku Kushimoto,Takahiro Kozawa,Junya Kano,Makio Naito, Visual-JW 2019 & WSE 2019, Osaka, Japan, 2019/11
  • 無機粒子は焼かずに作れ!!, 金井 和章、近藤 光、小澤 隆弘、内藤 牧男, APPIE産学官連携フェア2019, 大阪, 2019/11
  • 疎水性ナノ粒子を用いたバイオフィルムの形成抑制, 田中 智彦、小西 康裕、野村 俊之、近藤 光、内藤 牧男, 粉体工学会2019年度秋期研究発表会, 大阪, 2019/10
  • Particle synthesis with controlled morphology by wet planetary ball milling, Takahiro Kozawa,Kayo Fukuyama,Akira Kondo,Makio Naito, The 13th Pacific Rim Conference of Ceramic Societies, Okinawa, Japan, 2019/10
  • 酸化物系バルク型全固体電池における複合正極構造の検討, 迎山 聡一朗、小澤 隆弘、内藤 牧男, 粉体工学会2019年度秋期研究発表会, 大阪, 2019/10
  • アルミナナノ粒子/セラミックス繊維複合断熱材の熱伝導率測定, 田坂 太一、大村 高広、荻原 伸治、馬渕 賢作、近藤 光、内藤 牧男, 第40回日本熱物性シンポジウム, 長崎, 2019/10
  • 親水性ナノ粒子を用いたバイオフィルムの形成抑制, 田中 智彦、小西 康裕、野村 俊之、近藤 光、内藤 牧男, 粉体工学会2019年度秋期研究発表会, 大阪, 2019/10
  • ボールミル粉砕予測のためのシミュレーションツール開発, 石原 真吾,久志本 築,加納 純也,近藤 光,小澤 隆弘,内藤 牧男, 粉体工学会 第54回 技術討論会, 名古屋, 2019/09
  • 液中ボールミルにおける媒体運動のDEMシミュレーション結果と粉砕実験結果の比較検討, 近藤 光,小澤 隆弘,内藤 牧男,石原 真吾,久志本 築,加納 純也, 粉体工学会 第54回 技術討論会, 名古屋, 2019/09
  • 湿式粉砕による機能性ナノ粒子の非加熱合成, 小澤 隆弘,福山 香代,近藤 光,内藤 牧男, 粉体工学会 第54回 技術討論会, 名古屋, 2019/09
  • 親水性ナノ粒子を用いた表面処理による基板表面への細胞の付着制御, 松本 拓海、田中 智彦、野村 俊之、近藤 光、内藤 牧男, 粉体工学会第55回夏期シンポジウム, 横浜, 2019/08
  • High Quality Advanced Materials Designed by Smart Powder Processing, Makio Naito,Takahiro Kozawa,Akira Kondo, GFMAT-2 and Bio-4, Toronto, Canada, 2019/07
  • 液中ボールミルの粉砕結果とDEMシミュレーションにより算出した衝突エネルギーとの関係, 近藤 光、小澤 隆弘、内藤 牧男、石原 真吾、久志 本築、加納 純也, 粉体工学会2019年度春期研究発表会, 東京, 2019/05
  • ジオポリマー硬化体の圧縮強度におよぼすフライアッシュ粒子への機械的処理の効果, 松岡 光昭、大倉 滉平、横山 佳帆、村山 憲弘、上田 正人、内藤 牧男, 粉体工学会2019年度春期研究発表会, 東京, 2019/05
  • Strengthening calcium sulfate through microstructural design, W.H.Tuan,H.Y.Chang,Y.C.Chen,P.Y. Hsu,T.Kozawa,A.Kondo,M. Naito, 4th Osaka University-JWRI/NTU-MSE Workshop, Taipei, Taiwan, 2019/03
  • リチウムイオン電池の性能向上を目指したLiMn2O4/LiMnPO4コアシェル型正極粒子の作製, 原田 稔也、小澤 隆弘、内藤 牧男, 粉体工学会2018年度秋期研究発表会, 東京, 2018/11
  • フラッシュ法による断熱材の熱拡散率評価の試み, 阿子島 めぐみ、阿部 陽香、近藤 光、大村 高広、内藤 牧男, 日本熱物性学会第39回日本熱物性シンポジウム, 名古屋, 2018/11
  • 天然ガラスの粉砕・磨砕処理による活性化とその利用法の開発, 神谷 昌岳、近藤 充記、島 和也、伴 なお美、中平 敦、近藤 光、内藤 牧男, 第56回粉体に関する討論会, 静岡, 2018/09
  • 高電位正極活物質LiNi0.5Mn1.5O4の固相合成に及ぼす水蒸気分圧の影響, 小澤 隆弘,広部 大樹,内藤 牧男, 日本セラミックス協会第31回秋季シンポジウム, 名古屋, 2018/09
  • 異種活物質で設計されたリチウムイオン電池用コアシェル型正極粒子の作製, 原田 稔也,小澤 隆弘,内藤 牧男, 日本セラミックス協会第31回秋季シンポジウム, 名古屋, 2018/09
  • Preparation of translucent polycrystalline alumina by hot isostatic pressing, Bo-Ting Lu,Wei-Hsing Tuan,Dusan Galusek,Makio Naito, The 6th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 54th Summer Symposium on Powder Technology,, 2018/07
  • Ceramic with crack healing capability and its mechanism, Wei-Hsing Tuan,Hao-Yu Chang,Ying-Cen Chen,Hsiu-Ching Hsu,Makio Naito,Po-Liang Lai, The 6th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 54th Summer Symposium on Powder Technology,, 2018/07
  • Validity and Reliability of thermal diffusivity measurement by the flash method for thermal insulation materials, Megumi Akoshima,Haruka Abe,Tseng-Wei Lian,Akira Kondo,Makio Naito, The 6th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 54th Summer Symposium on Powder Technology,, 2018/07
  • Evaluation for specific heat capacity of thermal insulation material by differential scanning calorimeter, Haruka Abe,Megumi Akoshima,Tseng-Wen Lian,Akira Kondo,Makio Naito, The 6th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 54th Summer Symposium on Powder Technology,, 2018/07
  • Preparation of LiMn2O4@LiMnPO4 core@shell cathodes with improved thermostability for Li-ion batteries, Toshiya Harata,Takahiro Kozawa,Makio Naito, The 6th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 54th Summer Symposium on Powder Technology,, 2018/07
  • Effect of BaF2, YF3 and Al(OH)3 powders addition on the synthesis of YAG:Ce3+ phosphor by mechanical method, Kazuaki Kanai,Yoshifumi Fukui,Shinji Ozawa,Takahiro Kozawa,Akira Kondo,Makio Naito, The 6th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 54th Summer Symposium on Powder Technology,, 2018/07
  • DEM simulation for the analysis of ball behavior in wet ball milling, Shingo Ishihara,Akira Kondo,Kizuku Kushimoto,Takahiro Kozawa,Junya Kano,Makio Naito, The 6th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 54th Summer Symposium on Powder Technology,, 2018/07
  • Effect of fine particle addition on the media ball motion in wet ball milling apparatus, Akira Kondo,Shingo Ishihara,Kizuku Kushimoto,Takahiro Kozawa,Junya Kano,Makio Naito, The 6th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 54th Summer Symposium on Powder Technology,, 2018/07
  • Water vapor-assisted solid-state synthesis of LiNi0.5Mn1.5O4 high-voltage cathode for Li-ion batteries, Takahiro Kozawa,Daiki Hirobe,Kunika Uehara,Makio Naito, The 6th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 54th Summer Symposium on Powder Technology,, 2018/07
  • 機械的エネルギーによる化学反応促進:酸廃液の処理プロセスの検討, 釘宮 公一,小澤 隆弘,内藤 牧男,原田 隆史,板倉 克仁, 粉体工学会2018年度春期研究発表会, 京都, 2018/05
  • 機械的処理によるアルミナ粒子/セラミック繊維複合多孔体の作製とその熱的及び機械的特性, Tseng-Wen Lian,近藤 光,小澤 隆弘,内藤 牧男,大村 高弘,Wei-Hsing Tuan, 粉体工学会2018年度春期研究発表会, 京都, 2018/05
  • Low-temperature synthesis of micron-sized LiNi0.5Mn1.5O4 particles by solid-state reaction in water vapor, Daiki Hirobe,Takahiro Kozawa,Makio Naito, 42nd International Conference and Exposition on Advanced Ceramics and Composites, Florida, USA, 2018/01
  • 液中粉砕による非加熱ナノ粒子合成手法の開発, 小澤 隆弘,近藤 光,内藤 牧男, 第55回粉体に関する討論会, 宮城, 2017/11
  • 機械的手法によるYAG蛍光体の合成に関するフラックスの添加効果, 金井 和章,福井 祥文,小澤 隆弘,近藤 光,内藤 牧男, 粉体工学会2017年度秋期研究発表会, 大阪, 2017/10
  • 水蒸気がアシストするLiNi0.5Mn1.5O4正極粒子の形態変化, 広部 大樹,小澤 隆弘,内藤 牧男, 粉体工学会2017年度秋期研究発表会, 大阪, 2017/10
  • 水蒸気雰囲気下での固相反応によるリチウムイオン電池用高電位正極材料の合成とその特性評価, 広部 大樹,小澤 隆弘,内藤 牧男, 日本セラミックス協会 第30回秋季シンポジウム, 兵庫, 2017/09
  • 親水性ナノ粒子断熱材の熱伝導率に及ぼす水分の影響, 大村 高弘、Tseng-Wen Lian、近藤 光、内藤 牧男, 粉体工学会第53回夏期シンポジウム,, 2017/09
  • ガラス繊維/フュームドシリカ複合多孔体の比熱容量測定, 阿部 陽香、阿子島 めぐみ、Tseng-Wen Lian、近藤 光、内藤 牧男, 粉体工学会第53回夏期シンポジウム,, 2017/09
  • Role of carbon nanoparticles in mechanical synthesis of cathode materials for Li-ion batteries, Takahiro Kozawa,Akira Kondo,Makio Naito, 9th International Symposium on Nitrides & 5th International Symposium on SiAlONs and Non-Oxides, Sapporo, Japan, 2017/08
  • Low temperature synthesis of YAG with addition of YF3 by mechanical method, Kazuaki Kanai,Yoshifumi Fukui,Takahiro Kozawa,Akira Kondo,Makio Naito, The 7th Asian Particle Technology Symposium, Taoyuan, Taiwan, 2017/07
  • Insertion of lattice strains and defects into high-voltage cathode materials for Li-ion batteries by milling, Takahiro Kozawa,Takeshi Murakami,Makio Naito, The 7th Asian Particle Technology Symposium, Taoyuan, Taiwan, 2017/07
  • The effect of hydrophobic silica particles on the thermal and mechanical properties of fibrous silica compacts, Tseng-Wen Lian,Akira Kondo,Takahiro Kozawa,Megumi Akoshima,Haruka Abe,Takahiro Ohmura,Wei-Hsing Tuan,Makio Naito, 3rd MSE-JWRI Workshop on Materials Design and Joining, Osaka, Japan, 2017/05
  • 湿式メカニカル合成での不純物がリチウムイオン電池特性へ及ぼす影響, 鈴木 慎司,小澤 隆弘,内藤 牧男, 粉体工学会2017年度春期研究発表会, 東京, 2017/05
  • Synthesis of lithium titanate hydrate nanotubes by planetary ball milling and their conversion to Li4Ti5O12 anode for Li-ion batteries, Shinji Suzuki,Takahiro Kozawa,Makio Naito, 41st International Conference and Exposition on Advanced Ceramics and Composites (ICACC2017), Florida, USA, 2017/01
  • Direct preparation of composite granules composed of cathode and electrolyte particles for all-solid-state Li-ion batteries by mechanical method, Takahiro Kozawa,Akira Kondo,Kayo Fukuyama,Makio Naito,Hideyuki Koga,Hideki Iba, 41st International Conference and Exposition on Advanced Ceramics and Composites (ICACC2017), Florida, USA, 2017/01
  • 粉砕機を用いた層状チタン酸塩ナノシート/ナノチューブの非加熱合成, 鈴木 慎司,小澤 隆弘,村上 猛,内藤 牧男, 粉体工学会 2016年度 秋期研究発表会, 大阪, 2016/11
  • ナノセルロース強化吸着剤を利用した環境浄化システムの開発, 伴 なお美、近藤 充記、島 和也、神谷 昌岳、中平 敦、内藤 牧男, 粉体工学会2016年度秋期研究発表会, 東京, 2016/11
  • シリカナノ粒子を用いたカビ胞子の付着抑制, 南浦 茉奈、深町 一仁、弓山 将太、小西 康裕、野村 俊之、近藤 光、内藤 牧男, 粉体工学会2016年度秋期研究発表会, 東京, 2016/11
  • Stochastic Estimation on Granule Collapse in Powder Compact under Isostatic Pressue, Kouichi Yasuda,Satoshi Tanaka,Makio Naito, The 33 rd International Korea-Japan Seminar on Ceramics, Daejeon, Korea, 2016/11
  • Thermal Conductivity of a Porous Composite composed of Glass-fiber/Fumed-silica-nanoparticle, Megumi Akoshima,Haruka Abe,Tseng-Wen Lian,Akira Kondo,Makio Naito, The 11 th Asian Thermophysical Properties Conference, Yokohama, Japan, 2016/10
  • 水蒸気焼成による球状LiMn2O4粒子の低温粒成長, 小澤 隆弘,村上 猛,内藤 牧男,柳澤 和道, (公社)日本セラミックス協会第29回秋季シンポジウム, 広島, 2016/09
  • 遊星ボールミルを用いたチタン酸リチウム水和物の合成, 鈴木 慎司,小澤 隆弘,村上 猛,内藤 牧男, (公社)日本セラミックス協会第29回秋季シンポジウム, 広島, 2016/09
  • 機械的粒子複合化手法を用いたAl2O3/ZrO2セラミックスの微構造制御, 松岡 光昭、所 千晴、魚路 拓哉、多々見 純一、内藤 牧男, 日本セラミックス協会第29回秋季シンポジウム, 東広島, 2016/09
  • DSCによる比熱容量測定Ⅵ―断熱材の素材測定について?, 阿部 陽香、阿子島 めぐみ、Tseng-Wen Lian、近藤 光、内藤 牧男, 日本熱測定学会第52回熱測定討論会, 徳島, 2016/09
  • Specific Heat Capacity Measurement of Thermal Insulation Material by Differential Scanning Calorimeter, Haruka Abe,Megumi Akoshima,Tseng-Wen Lian,Akira Kondo,Makio Naito, ICTAC16, Florida, USA, 2016/08
  • Stochastic Model for Ceramic Granule Collapse during Cold Isostatic Pressing, Kouichi Yasuda,Satoshi Tanaka,Makio Naito, The Ninth Pacific Rim International Conference on Advanced Materials and Processing (PRICM 9), Kyoto, Japan, 2016/08
  • Powder synthesis for battery application by one-step mechanical method, Mitsuaki Matsuoka,Chiharu Tokoro,Akira Kondo,Takahiro Kozawa,Makio Naito, The 14 th Korea/Japan International Symposium on Resources Recycling and Materials Science, Incheon, Korea, 2016/07
  • レーザフラッシュ法を用いた多孔質断熱材料の迅速な熱伝導特性評価, Tseng-Wen Lian、近藤 光、内藤 牧男、阿子島 めぐみ、阿部 陽香、大村 高弘、Wei-Hsing Tuan, 粉体工学会第51回技術討論会, 東京, 2016/06
  • 複合粒子により作製されたSOFCカソードの電極特性評価, 近藤 光、Cheng-Yen Hsu、小澤 隆弘、内藤 牧男, 粉体工学会第51回技術討論会, 東京, 2016/06
  • A Stochastic Modeling for Ceramic Granule Collapse during Cold Isostatic Pressing, K.Yasuda,S.Tanaka,M.Naito, 9th International Conference on High Temperature Ceramic Matrix Composites (HTCMC9) and Global Forum on Advanced Materials and Technologies for Sustainable Development (GFMAT2016), Toronto, Canada (2016), 2016/06
  • Smart powder processing for advanced materials and sustainable development, M.Naito,T.Kozawa,A.Kondo,M. Matsuoka, 9th International Conference on High Temperature Ceramic Matrix Composites (HTCMC9) and Global Forum on Advanced Materials and Technologies for Sustainable Development (GFMAT2016), Toronto, Canada (2016), 2016/06
  • Microstructure control of Al2O3/ZrO2 ceramics using nanocomposite particles prepared by mechanical treatment, M.Matsuoka,T.Uoji,J.Tatami,M.Naito,C.Tokoro, 9th International Conference on High Temperature Ceramic Matrix Composites (HTCMC9) and Global Forum on Advanced Materials and Technologies for Sustainable Development (GFMAT2016), Toronto, Canada, 2016/06
  • スマートプロセスを活用した金属酸化物蛍光体の創製, 金井 和章,福井 祥文,小澤 隆弘,近藤 光,内藤 牧男, 粉体工学会 2016年度 春期研究発表会, 京都, 2016/05
  • 高電位LiNi0.5Mn1.5O4正極粒子の機械的合成における原料粉体の影響, 垂井 洋静,小澤 隆弘,内藤 牧男, 粉体工学会 2016年度 春期研究発表会, 京都, 2016/05
  • ワンステップの機械的処理によるSOFCカソード用複合粒子の作製とその特性評価, 近藤 光,Xiuan Xi,小澤 隆弘,内藤 牧男, 粉体工学会 2016年度 春期研究発表会, 京都, 2016/05
  • ナノ粒子/繊維複合材料の熱伝導率および熱伝達率の同時測定, 大村 高弘、峯 良太、中村 優介、井上 諒、辻 直希、内藤 牧男, 粉体工学会2016年度春期研究発表会, 京都, 2016/05
  • CIP成形体中の顆粒の破壊確率に関する理論解析, 安田 公一、田中 諭、内藤 牧男, 粉体工学会2016年度春期研究発表会, 京都, 2016/05
  • Collapse Probability of Granules under Isostatic Pressure, K.Yasuda,S.Tanaka,M.Naito, EnCera 2016, Niigata, Japan, 2016/05
  • LiCoPO4/C複合粒子造粒体のワンステップメカニカル合成, 松岡 光昭,近藤 光,小澤 隆弘,内藤 牧男,古賀 英行,齋藤 俊哉,射場 英紀, (公社)日本セラミックス協会2016年年会, 東京, 2016/03
  • (Duplication :223行) Rapid, Tseng-Wen Lian,Akira Kondo,Makio Naito,Megumi Akoshima,Haruka Abe,Takahiro Ohmura,Wei-Hsing Tuan, 2016/03
  • The Change in Stress Field in Ceramic Powder Compact during Cold Isostatic Pressing, K. Yasuda,S. Tanaka,M. Naito, 40th International Conference & Exposition on Advanced Ceramics and Composites, Daytona Beach, USA, 2016/01
  • Numerical Simulation for Stress Distribution in Powder Compact during CIP, K. Yasuda,S. Tanaka,M. Naito, 2015/12
  • 被覆型複合粒子を用いた絶縁体散乱層導入によるZnO系熱電材料性能向上の試み, 山名 崇裕,勝山 茂,田中 敏宏,近藤 光,内藤 牧男, 日本鉄鋼協会・日本金属学会関西支部、鉄鋼プロセス研究会・材料化学研究会、平成27年度第3回合同研究会, 大阪, 2015/12
  • The Effect of Elastic Inhomogeneity on Stress Distribution in Powder Compact during Cold Isostatic Pressing, K. Yasuda,S. Tanaka,M. Naito, The 32nd International Japan-Korea Seminar on Ceramics, Nagaoka, Japan, 2015/11
  • 機械的手法を用いたYAG蛍光体の合成とその蛍光特性, 金井 和章,福井 祥文,小澤 隆弘,近藤 光,内藤 牧男, 粉体工学会 2015年度 秋期研究発表会, 大阪, 2015/10
  • 湿式メカニカル法によるSr-hydrogarnetの合成, 小澤 隆弘,内藤 牧男, 粉体工学会 2015年度 秋期研究発表会, 大阪, 2015/10
  • 冷間等方 加圧成形時の成形体中の圧力分布推定に関する連続体モデル, 安田 公一,田中 諭,内藤 牧男, 粉体工学会2015年度秋期研究発表会, 大阪, 2015/10
  • DSCによる比熱容量測定Ⅴ ―断熱材の測定について-, 阿部 陽香,阿子島 めぐみ,Tseng-Wen Lian,近藤 光,内藤 牧男, 日本熱測定学会第51回熱測定討論会, 埼玉, 2015/10
  • Continuum Model for Estimating Stress Distribution in Powder Compact during Cold Isostatic Pressing, K. Yasuda,S. Tanaka,M. Naito, STAC-9 &TOEO-9, Tsukuba, Japan, 2015/10
  • LiNi0.5Mn1.5O4正極の電気化学特性におよぼす機械的作用の影響, 小澤 隆弘,垂井 洋静,内藤 牧男, (公社)日本セラミックス協会第28回秋季シンポジウム, 富山, 2015/09
  • メカニカルワンステッププロセスによる高電位LiNi0.5Mn1.5O4正極粒子の合成とその特性評価, 垂井 洋静,小澤 隆弘,内藤 牧男, (公社)日本セラミックス協会第28回秋季シンポジウム, 富山, 2015/09
  • One-Pot Mechanical Synthesis of LiNi0.5Mn1.5O4 Cathode Powder for Li-Ion Batteries, Hiroyasu Tarui,Takahiro Kozawa,Mitsuaki Matsuoka,Akira Kondo,Makio Naito, The 11th Pacific Rim Conference of Ceramic Societies, Jeju, Korea, 2015/08
  • Preparation of Concentration-Gradient Cathode Particles for Li-Ion Battery via Mechanical Process, Takahiro Kozawa,Makio Naito, The 11th Pacific Rim Conference of Ceramic Societies, Jeju, Korea, 2015/08
  • Effect of milling conditions on the characteristics of YAG phosphor, Kazuaki Kanai,Yasufumi Fukui,Takahiro Kozawa,Akira Kondo,Makio Naito, The 5th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 51st Summer Symposium on Powder Technology(ICCCI2015), Kurashiki, Japan, 2015/07
  • One-step mechanical processing to prepare LSCF/GDC composite particles for SOFC cathode, Xiuan Xi,Akira Kondo,Takahiro Kozawa,Makio Naito, The 5th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 51st Summer Symposium on Powder Technology(ICCCI2015), Kurashiki, Japan, 2015/07
  • One-step mechanical synthesis of LiCoO2 granule and post-heating, Eri Nakamura,Akira Kondo,Takahiro Kozawa,Mistuaki Matsuoka,Makio Naito,Hideyuki Koga,Hideki Iba, The 5th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 51st Summer Symposium on Powder Technology(ICCCI2015), Kurashiki, Japan, 2015/07
  • Mechanically induced phase transformation of boehmite and the conversion into transition-metal aluminates, Takahiro Kozawa,Makio Naito, The 5th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 51st Summer Symposium on Powder Technology(ICCCI2015), Kurashiki, Japan, 2015/07
  • Effect of fumed silica properties on the thermal insulation performance of fibrous compact, Tseng-Wen Lian,Akira Kondo,Takahiro Kozawa,Takahiro Ohmura,Wei-Hsing Tuan,Makio Naito, The 5th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 51st Summer Symposium on Powder Technology(ICCCI2015), Kurashiki, Japan, 2015/07
  • Mechanical synthesis and electrochemical properties of LiNi0.5Mn1.5O4 cathode powder for Li-ion batteries, Hiroyasu Tarui,Takahiro Kozawa,Akira Kondo,Mistuaki Matsuoka,Makio Naito, The 5th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 51st Summer Symposium on Powder Technology(ICCCI2015), Kurashiki, Japan, 2015/07
  • Mechanical synthesis of cathode granules for lithium-ion secondary batteries and its microstructural and electrochemical evaluations, Eri Nakamura,Akira Kondo,Takahiro Kozawa,Mitsuaki Matsuoka,Makio Naito, The 5th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 51st Summer Symposium on Powder Technology(ICCCI2015), Kurashiki, Japan, 2015/07
  • Thermal conductivity of a porous composite composed of glass-fiber/fumed-silica-nanoparticle, M. Akoshima,H. Abe,T.-W. Lian,A. Kondo,M. Naito, The 5th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 51st Summer Symposium on Powder Technology(ICCCI2015), Kurashiki, Japan, 2015/07
  • Synthesis of porous La0.6Sr0.4Co0.2Fe0.8O3 particles by citric acid-addition ultrasonic spray pyrolysis (CA-USP), T. Kinoshita,H. Maruko,A. Kondo,M. Naito,M. Adachi, The 5th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 51st Summer Symposium on Powder Technology(ICCCI2015), Kurashiki, Japan, 2015/07
  • Carbon nanotubes based hydrogel materials: preparation, characterization and applications, Z. Tan,S. Ohara,H. Abe,M. Naito, The 5th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 51st Summer Symposium on Powder Technology(ICCCI2015), Kurashiki, Japan, 2015/07
  • Co-doping NiO and Nb2O5 into yttria-stabilized zirconia (YSZ) and its phase stability, P.-C. Chen,W.-H. Tuan,T.-W. Lian,M. Naito, The 5th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 51st Summer Symposium on Powder Technology(ICCCI2015), Kurashiki, Japan, 2015/07
  • Stochastic analysis on granule collapse during powder compaction, K. Yasuda,S. Tanaka,M. Naito, The 5th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 51st Summer Symposium on Powder Technology(ICCCI2015), Kurashiki, Japan, 2015/07
  • Particle Design and Mechanical Synthesis of Cathode Materials for Lithium-Ion Batteries, Takahiro Kozawa,Eri Nakamura,Hiroyasu Tarui,Akira Kondo,Mitsuaki Matsuoka,Makio Naito, 11th International Conference on Ceramic Materials and Components for Energy and Environmental Applications, Vancouver, Canada, 2015/06
  • 複合粒子造粒体の加熱処理によるSOFCカソードの作製とその特性評価, 近藤 光,中村 衣利,小澤 隆弘,内藤 牧男, 粉体工学会第50回技術討論会, 大阪, 2015/06
  • Electrochemical properties of the SOFC cathode prepared by citric acid-addition ultrasonic spray pyrolysis (CA-USP), H. Maruko,A. Arastoo,T. Kinoshita,A. Kondo,M. Naito,M. Adachi, 2015 Asian Aerosol Conference (AAC2015), Kanazawa, Japan, 2015/06
  • 機械的手法による複合酸化物粒子の合成とそれを用いたSOFCカソードの特性評価, 近藤 光,Xiuan X,小澤 隆弘,内藤 牧男, 粉体工学会2015年度春期研究発表会, 東京, 2015/05
  • 機械的手法を利用した濃度傾斜スピネル型粒子の合成, 小澤 隆弘、内藤 牧男, (公社)日本セラミックス協会2015年年会, 岡山, 2015/03
  • One-step mechanical processing to prepare LSM/ScSZ composite particles for SOFC cathode, A. Kondo,E. Nakamura,T. Kozawa,M. Naito, 39th International Conference & Exposition on Advanced Ceramics and Composites, Daytona Beach, USA, 2015/01
  • One-Pot Mechanical Synthesis of LiCoO2 Cathode Granule for Lithium Ion Batteries and its Microstructural Evaluation, E. Nakamura,A. Kondo,T. Kozawa,M. Matsuoka,M. Naito, 2nd JWRI-MSE Workshop on Materials Design and Joining 2015, Taipei, Taiwan, 2015/01
  • Direct Synthesis of Nanocomposite Cathode Materials for Lithium-Ion Batteries by Mechanical Process, Takahiro Kozawa,Eri Nakamura,Hiroyasu Tarui,Akira Kondo,Mitsuaki Matsuoka,Makio Naito, 2nd KANSAI Nanoscience and Nanotechnology International Symposium, 10th Handai Nanoscience and Nanotechnology International Symposium, Osaka, Japan, 2014/12
  • ドライプロセスによるシリカナノ粒子/ガラス繊維複合多孔体断熱材料の作製, Tseng-Wen Lian,近藤 光,小澤 隆弘,内藤 牧男,大村 高弘,Wei-Hsing Tuan, 粉体工学会2014年度秋期研究発表会, 東京, 2014/11
  • Stochastic Model on Granule Collapse during Cold Isostatic Pressing, Kouichi Yasuda,Satoshi Tanaka,Makio Naito, The 31st International Korea-Japan Seminar on Ceramics, Changwon, Korea, 2014/11
  • 大気雰囲気下でのメカニカル処理によるLiFePO4正極材料の直接合成と電池特性評価, 小澤 隆弘、片岡 紀明、近藤 光、中村 衣利、阿部 浩也、内藤 牧男, 第24回無機リン化学討論会, 高知, 2014/09
  • 酸化リチウム粉体を用いたコバルト酸リチウムのワンステップ合成とその特性評価, 中村 衣利、近藤 光、小澤 隆弘、松岡 光昭、阿部 浩也、内藤 牧男、古賀 英行、中西 真二、射場 英紀, (公社)日本セラミックス協会第27回秋季シンポジウム, 鹿児島, 2014/09
  • 多成分共沈によるSOFC燃料極用NiO-ScSZ複合粒子の合成と特性評価, 甲斐 信宏,来間 和男,近藤 光,阿部 浩也,内藤 牧男, (公社)日本セラミックス協会第27回秋季シンポジウム, 鹿児島, 2014/09
  • 静水圧成形中の顆粒崩壊の確率論, 安田 公一,田中 諭,内藤 牧男, 粉体工学会第50回夏期シンポジウム, 大阪, 2014/08
  • Novel Co-Precipitation Route to Synthesize NiO-ScSZ Nanocomposite for Solid Oxide Fuel Cells, Nobuhiro Kai,Kazuo Kuruma,Akira Kondo,Hiroya Abe,Makio Naito, IUMRS-ICA2014, Fukuoka, Japan, 2014/08
  • 機械的手法による複合酸化物粒子の合成とその応用, 小澤 隆弘、近藤 光、中村 衣利、阿部 浩也、内藤 牧男, 粉体工学会 第49回技術討論会, 東京, 2014/06
  • CIP成形体中の顆粒崩壊の確率論, 安田 公一,田中 諭,内藤 牧男, (公社)粉体粉末冶金協会平成26年度春季大会, 東京, 2014/06
  • メカニカル法によるLiFePO4/C複合ナノ粒子造粒体のワンステップ合成, 小澤 隆弘、片岡 紀明、近藤 光、中村 衣利、阿部 浩也、内藤 牧男, 粉体工学会2014年度春期研究発表会, 京都, 2014/05
  • Wei-Hsing Tuan:Dry Powder Processing of Fibrous Fumed Silica Compacts for Thermal Insulation, 2014/05
  • 機械的手法によるSOFC用LSM/ScSZ複合粒子の作製とその特性評価, 近藤 光,細川 晃平,奥宮 正太郎,阿部 浩也,内藤 牧男, 粉体工学会2014年度春期研究発表会, 京都, 2014/05
  • Smart Powder Processing for Advanced Materials, M. Naito, ESAFORM 2014, Espoo, Finland, 2014/05
  • 機械的合成・複合化同時処理によるSOFC用LSM/ScSZ複合粒子の作製, 近藤 光、細川 晃平、奥宮 正太郎、阿部 浩也、 内藤 牧男, 日本セラミックス協会2014年 年会, 横浜, 2014/03
  • LiFePO4/C複合造粒体のメカニカル合成, 小澤 隆弘、片岡 紀明、近藤 光、中村 衣利、阿部 浩也、内藤 牧男, 日本セラミックス協会2014年 年会, 横浜, 2014/03
  • メカニカル法によるLiNi0.5Mn1.5O4の合成と電池特性評価, 小澤 隆弘、近藤 光、中村 衣利、阿部 浩也、内藤 牧男、古賀 英行、中西 真二、射場 英紀, 日本セラミックス協会2014年 年会, 横浜, 2014/03
  • Fe Nanoparticle-dispersed Magnetorheological Fluids for Smart Joining, J.Noma,Y.Ueshima,S.Akaiwa,Y.Okamoto,T.Fukui,H.Abe,M.Naito, 1st KANSAI Nanoscience and Nanotechnology International Symposium, Osaka, Japan, 2014/02
  • One-pot mechanical synthesis of cathode materials for lithium ion batteries, Takahiro Kozawa,Akira Kondo,Eri Nakamura,Hiroya Abe,Makio Naito, 38th International Conference and Expo on Advanced Ceramics and Composites (ICACC 2014), Florida, USA, 2014/01
  • SiC粉体中間層を用いた黒鉛とW金属の接合, 大國 友行、宮本 欽生、阿部 浩也、内藤 牧男, 第52回セラミックス基礎科学討論会, 名古屋, 2014/01
  • Microstructure control of composite porous materials and its application, Makio Naito,Hiroya Abe,Akira Kondo,Takahiro Kozawa, Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 60, No. 12, p. 516-522, 2013/12
  • Build-up route to synthesize nanocomposites for enlarging TPB in SOFC anode electrodes, Hiroya Abe,Xiuan Xi,Akira Kondo,Makio Naito, ISETS 2013 and AMDI-4, Nagoya, Japan, 2013/12
  • メカノケミカル法による複合酸化物粒子のワンポット合成, 小澤 隆弘、中村 衣利、近藤 光、阿部 浩也、内藤 牧男, 第8回日本フラックス成長研究発表会, 東京, 2013/12
  • 機械的手法によるLiFePO4複合ナノ粒子のワンポット合成, 片岡 紀明、小澤 隆弘、近藤 光、中村 衣利、阿部 浩也、内藤 牧男, 粉体工学会2013年度秋期研究発表会, 大阪, 2013/10
  • One-pot Mechanical Processing to Create Nanocomposite Particles for Advanced Materials, Makio Naito,Akira Kondo,Hiroya Abe, Materials Science & Technology, MS&T'13, Montreal, Canada, 2013/10
  • Magnetic Nanoparticle as Smart Joining Material, Hiroya Abe,Makio Naito, 66 th IIW Annual Assembly, Essen, Germany, 2013/09
  • 炭酸Zr錯体溶液を用いる新規共沈法とSOFC電極用複合ナノ粒子の合成, Xi Xiuan、阿部 浩也、来間 和男、近藤 光、内藤 牧男, 日本セラミックス協会第26回秋季シンポジウム, 長野, 2013/09
  • LiFePO4複合粒子のメカニカルワンポット合成, 片岡 紀明、小澤 隆弘、近藤 光、中村 衣利、阿部 浩也、内藤 牧男, 日本セラミックス協会第26回秋季シンポジウム, 長野, 2013/09
  • Synthesis and Dispersion Control of Iron Nanoparticles for Magnetorheological Fluid, Hiroya Abe,Makio Naito,Shinya Yamanaka, 10th International Symposium on Agglomeration (AGGLOS 10), Kobe, Japan, 2013/09
  • ワンポットメカニカル合成されたLiCoO2ナノ粒子複合造粒体の微構造と電池特性評価, 中村 衣利、近藤 光、小澤 隆弘、阿部 浩也、内藤 牧男、吉田 淳、中西 真二、射場 英紀, 粉体工学会第49回夏期シンポジウム, 山梨, 2013/07
  • LiMnPO4ナノ粒子/カーボン複合造粒体のワンポットメカニカル合成, 近藤 光、阿部 浩也、内藤 牧男、吉田 淳、中西 真二、射場 英紀, 粉体工学会第49回夏期シンポジウム, 山梨, 2013/07
  • SiCと黒鉛の焼結接合, 大國 友行、宮本 欽生、阿部 浩也、内藤 牧男, 粉体工学会第49回夏期シンポジウム, 山梨, 2013/07
  • Electrostatic Dry Coating of Porous Composites for Li Ion Battery, H. Abe,A. Kondo,M. Naito,T. Wakimoto,M. Yamaguchi, The 10 th Pacific Rim Conference on Ceramic and Glass Technology (PACRIM10), San Diego, USA, 2013/06
  • Rapid Synthesis of Granules of LiCoO2 Nanoparticles by One-step Mechanical Method, A. Kondo,H. Abe,M. Naito,J. Yoshida,S. Nakanishi,H. Iba, The 10 th Pacific Rim Conference on Ceramic and Glass Technology (PACRIM10), San Diego, USA, 2013/06
  • 機械的手法による複合酸化物ナノ粒子合成に及ぼす操作条件の影響, 細川 晃平、近藤 光、奥宮 正太郎、阿部 浩也、 内藤 牧男, 粉体工学会2013年度春期研究発表会, 東京, 2013/05
  • Build-up Route to Synthesize NiO-YSZ Nanocomposites for Enlarging TPB in SOFC Anode, Xiuan Xi,Akira Kondo,Hiroya Abe,Makio Naito, 1st Japan-Taiwan Workshop on Materials Design and Joining, Osaka, Japan, 2013/05
  • Morphology and Structure of Hydrous Tungsten Oxide Grown in Additive-free Aqueous Precursor, Mohamed ElNouby,Kazuo Kuruma,Eri Nakamura,Hiroya Abe,Makio Naito, 1st Japan-Taiwan Workshop on Materials Design and Joining, Osaka, Japan, 2013/05
  • Electrostatic Dry Coating of Cathode Composite for Li Ion Battery, Hiroya Abe,Akira Kondo,Makio Naito,Takashi Wakimoto,Masayuki Yamaguchi, IMAPS/ACerS 9th international conference and exhibition on CICMT 2013, Orlando, USA, 2013/04
  • Development of Graphite/AlN Joints with Al-Y-O Phase Penetration, T. Okuni,Y. Miyamoto,H. Abe,M. Naito, 37th International Conference and Expo on Advanced Ceramics and Composites, Florida, USA, 2013/01
  • Rapid Synthesis of Cathode Materials for Li-ion Battery by Mechanical Method, Akira Kondo,Hiroya Abe,Makio Naito,Jun Yoshida,Shinji Nakanishi,Hideki Iba, 8th Handai Nanoscience and Nanotechnology International Symposium, Osaka, Japan, 2012/12
  • Synthesis and Dispersion of Fe Nanoparticles for Magnetrheological Fluid, J. Noma,Y. Ueshima,S .Akaiwa,S. Yamamuro,T. Fukui,H. Abe,M. Naito, 8th Handai Nanoscience and Nanotechnology International Symposium, Osaka, Japan, 2012/12
  • テープキャスティングを用いた黒鉛とAlNセラミックスの接合, 大國 友行,宮本 欽生,阿部 浩也,内藤 牧男, 粉体工学会2012年度秋期研究発表会, 東京, 2012/11
  • 黒鉛と炭化ケイ素セラミックスの接合, 大國 友行、宮本 欽生、阿部 浩也、内藤 牧男, (一社)スマートプロセス学会平成24年度秋季総合学術講演会, 大阪, 2012/11
  • メカノケミカル法によるLiイオン電池用正極の高速合成, 吉田 淳、中西 真二、射場 英紀、近藤 光、阿部 浩也、内藤 牧男, 電気化学会電池技術 委員会主催第53回電池討論会, 福岡, 2012/11
  • Mechanochemical Processing of Cathode Materials for Li-Ion Battery, Akira Kondo,Hiroya Abe,Makio Naito,Jun Yoshida,Shinji Nakanishi,Hideki Iba, Materials Science & Technology, MS&T'12, Pittsburgh, USA, 2012/10
  • ナノ多孔質断熱材の開発, 大村 高弘、伊藤 泰男、内藤 牧男、阿部 浩也, (公社)日本セラミックス協会第25回秋季シンポジウム, 名古屋, 2012/09
  • メカニカルプロセスによる二次電池用多孔質複合粒子の直接合成, 近藤 光、阿部 浩也、内藤 牧男、吉田 淳、中西 真二、射場 英紀, (公社)日本セラミックス協会第25回秋季シンポジウム, 名古屋, 2012/09
  • 共沈法によるNiO-YSZ複合粒子の合成とSOFC燃料極の微構造制御, 原田 諒、近藤 光、来間 和男、阿部 浩也、内藤 牧男, (公社)日本セラミックス協会第25回秋季シンポジウム, 名古屋, 2012/09
  • Effects of Magnesium Oxychloride and Silicon Carbide Additives on the Foaming Property during Firing for Porcelain Ceramics and Its, Xiuan Xi,Anze Shui,Yunfeng Li,Yanmin Wang,Hiroya Abe,Makio Naito, The Fourth International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI 2012), Kurashiki, Japan, 2012/09
  • Effect of the Surface Property of Fumed Silica Nanoporous Composite on Its Thermal Conductivity, Takahiro Ohmura,Ken Maeda,Yasuo Ito,Yuya Furukawa,Yoshihiko Goto,Makio Naito, The Fourth International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI 2012), Kurashiki, Japan, 2012/09
  • Fabrication and Performance of an Anode-supported SOFC with Fine-grained Composite Functional Layer, Masahiro Andatsu,Akira Kondo,Eri Nakamura,Hiroya Abe,Makio Naito, The Fourth International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI 2012), Kurashiki, Japan, 2012/09
  • Synthesis of NiO-YSZ Nanocomposite Particles and Their Porous Assembly for High-performance of SOFC Anode, Ryo Harada,Eri Nakamura,Akira Kondo,Hiroya Abe,Makio Naito, The Fourth International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI 2012), Kurashiki, Japan, 2012/09
  • Stretchable Carbon Nanotube Hydrogel for Assembly of Aligned Nanostructures, Hiroya Abe,Zhenquan Tan,Akira Kondo,Makio Naito, The Fourth International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI 2012), Kurashiki, Japan, 2012/09
  • Joining of Graphite with Non-oxide Ceramics and Its Interface Analysis, Tomoyuki Okuni,Yoshinari Miyamoto,Hiroya Abe,Makio Naito, The Fourth International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI 2012), Kurashiki, Japan, 2012/09
  • Effect of Precursor pH on Microstructure and Electrochromic Properties of Tungsten Oxide Thin Films, Mohamed S. El Nouby,Kazuo Kuruma,Hiroya Abe,Makio Naito, The Fourth International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI 2012), Kurashiki, Japan, 2012/09
  • Novel Mechanical Processing of Cathode Materials for Li-Ion Battery, Akira Kondo,Hiroya Abe,Makio Naito,Jun Yoshida,Shinji Nakanishi,Hideki Iba, The Fourth International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI 2012), Kurashiki, Japan, 2012/09
  • Colloidal dispersions with iron core/oxide shell nanoparticles for large magnetorheological response, Shinya Yamanaka,Toshiyuki Fujimoto,Yoshikazu Kuga,Hiroya Abe,Makio Naito,Yuya Ueshima,Junichi Noma,Shigeki Yamamuro, The 16th International Congress on Rheology, Lisbon, Portugal, 2012/08
  • 難処理複合廃材の循環利用プロセスの開発, 近藤 光、阿部 浩也、内藤 牧男、大村 高弘, 粉体工学会第48回夏期シンポジウム, 京都, 2012/07
  • Colloidal Magnetorheological Fluid for Smart Actuating Systems, Shinya Yamanaka,Toshiyuki Fujimoto,Yoshikazu Kuga,Hiroya Abe,Makio Naito,Yuya Ueshima,Junichi Noma,Shigeki Yamamuro, 13th International Conference on Electrorheological Fulids and Magnetorheological Suspensions, Ankara, Turkey, 2012/07
  • Rapid Synthesis of Cathode Materials for Li-ion Battery by Mechanochemical Method, Jun Yoshida,Shinji Nakanishi,Hideki Iba,Akira Kondo,Hiroya Abe,Makio Naito, 16th International Meeting on Lithium Batteries, Jeju, Korea, 2012/06
  • 廃FRP管の循環利用プロセスの開発, 近藤 光、阿部 浩也、内藤 牧男、加納 純也、間宮 聡、大村 高弘, (社)粉体粉末冶金協会平成24年度春季大会(第109回講演大会), 京都, 2012/05
  • Nanoparticle Technology Handbook, Masuo Hosokawa,Kiyoshi Nogi,Makio Naito,Toyokazu Yokoyama, Nanoparticle Technology Handbook, Elsevier, 2012
  • Preface, Kiyoshi Nogi,Makio Naito,Toyokazu Yokoyama, Nanoparticle Technology Handbook, Elsevier, 2012
  • Smart Recycling Process of Waste FRP for Advanced Materials, Akira Kondo,Hiroya Abe,Norifumi Isu,Masashi Miura,Azusa Mori,Takahiro Ohmura,Makio Naito, International Symposium on Materials Science and Innovation for Sustainable Society (ECO-MATES 2011), Osaka, Japan, 2011/11
  • Fabrication of anode-supported SOFC with nanocomposite active layer, Masahiro Andatsu,Kazuo Kuruma,Akira Kondo,Hiroya Abe,Makio Naito, International Symposium on Materials Science and Innovation for Sustainable Society (ECO-MATES 2011), Osaka, Japan, 2011/11
  • Effect of Fatty Acid Coating on Dynamic Magnetorheology of Iron Particles in Mineral Oil, Shinya Yamanaka,Toshiyuki Fujimoto,Yoshikazu Kuga,Hiroya Abe,Makio Naito, Eighth International Conference on Flow Dynamics, Sendai, Japan, 2011/11
  • Smart Powder Processing for Energy-saving and Material Recycling, Makio Naito,Hiroya Abe,Akira Kondo, USA-Japan Ceramic Processing Workshop, Albuquerque, USA, 2011/10
  • FRP廃材を用いた軽量低熱伝導材料の開発, 近藤 光、阿部 浩也、内藤 牧男、井須 紀文、三浦 正嗣、森 梓, 資源・素材学会、資源・素材2011(堺), 堺, 2011/09
  • YSZシングルナノ粒子の分散制御と複合化アセンブリ, 阿部 浩也、山中 真也、内藤 牧男、佐藤 和好、木下 暢、篠崎 良太、中別府 哲也, 日本セラミックス協会第24回秋季シンポジウム, 札幌, 2011/09
  • ナノ複合活性層を有するアノード支持型SOFCセルの作製とその特性評価, 安達 雅浩、近藤 光、来間 和男、阿部 浩也、内藤 牧男、佐藤 和好, 日本セラミックス協会第24回秋季シンポジウム, 札幌, 2011/09
  • トリブロックコポリマーを用いた高濃度スラリーゲルの調製と3次元直接描画成形, 近藤 光、阿部 浩也、内藤 牧男, 日本セラミックス協会第24回秋季シンポジウム, 札幌, 2011/09
  • 飽和脂肪酸キャッピングによるオイル中への鉄ナノ粒子分散と磁気粘性効果, 山中 真也、藤本 敏行、空閑 良壽、阿部 浩也、内藤 牧男, 化学工学会第43回秋季大会, 名古屋, 2011/09
  • Smart Powder Processing for Advanced Materials, Makio Naito, 1st Belgium and Japan Joint Symposium on Smart Processing and Novel Joining Technology, Mol, Belgium, 2011/07
  • 断熱材中の粒子がふく射の減 衰に与える影響, 大村 高弘、内藤 牧男, 日本伝熱学会第48回日本伝熱シンポジウム, 岡山, 2011/06
  • ナノ複合活性層を有するアノード支持型SOFCセルの作製とその特性評価, 安達 雅浩、近藤 光、阿部 浩也、内藤 牧男, 粉体工学会第46回技術討論会, 東京, 2011/06
  • 機械的手法を用いた燃料電池電極材料の最適化検討, 保原 夏朗、阿部 浩也、内藤 牧男、萩原 明房, 粉体工学会第46回技術討論会, 東京, 2011/06
  • メカノケミカル法を用いた燃料電池用低白金触媒の開発, 棟方 裕一、田下 敬光、金村 聖志、近藤 光、内藤 牧男, 粉体工学会第46回技術討論会, 東京, 2011/06
  • リチウムイオン二次電池特性に及ぼすLiMnPO4粒子へのカーボン複合化の影響, 吉田 淳、中西 真二、射場 英紀、阿部 浩也、内藤 牧男, 粉体工学会第46回技術討論会, 東京, 2011/06
  • 金属アルミニウム結合黒鉛複合材(Aluminum Metal Bonded Carbon)の開発とその物性評価, 中村 文滋,陳 衛武,内藤 牧男,東城 哲朗,宮本 欽生, (社)粉体粉末冶金協会平成23年度春季大会(第107回講演大会), 東京, 2011/05
  • Concentrated ceramic colloidal gelling with PEO-PPO-PEO triblock copolymers for three dimensional direct- ink-writing, Akira Kondo,Hiroya Abe,Makio Naito, 1st International Symposium on Colloids and Materials (Colloid and Materials 2011), Amsterdam, The Netherlands, 2011
  • 温度応答性コロイドゲルを用いたナノ粒子構造体のダイレクトライティング, 近藤 光、阿部 浩也、内藤 牧男, (社)高温学会 平成22年度秋季総合学術講演会, 大阪, 2010/12
  • A facile method to fabricate palladium nanoparticles arrangements on single-walled carbon nanotubes, 2010/12
  • Arrangement of metal nanoparticles on carbon nanotubes, Zhenquan Tan,Hiroya Abe,Makio Naito,Satoshi Ohara, IIT Kanpur Golden Jubilee Celebration- International Cnference on Carbon Nanotechnology: Potential and Challenges (Indian Institute of Technology Kanpur), Kanpur, India, 2010/12
  • Arrangement of Pd nanoparticles on SDS-functionalized single-walled carbon nanotubes, Zhenquan Tan,Hiroya Abe,Makio Naito,Satoshi Ohara, Visual-JW2010, Osaka, Japan, 2010/11
  • Structuring of YSZ nanocrystal chains and their application on active composite SOFC cathodes, Takanori Mahara,Shinya Yamanaka,Akira Kondo,kazuyoshi Sato,Hiroya Abe,Makio Naito, Visual-JW2010, Osaka, Japan, 2010/11
  • Dispersion control of magnetic nanoparticles for functional fluids, Shinya Yamanaka,Hiroya Abe,Makio Naito,Yuya Ueshima,Junichi Noma, Visual-JW2010, Osaka, Japan, 2010/11
  • Thermoreversible colloidal gelation for direct-assembly of nanoparticles, Akira Kondo,Masahiro Andatsu,Hiroya Abe,Makio Naito, Visual-JW2010, Osaka, Japan, 2010/11
  • Generation of Fe nanoparticles under thermally pinched He-H2 arc plasma, Junichi Noma,Yuya Ueshima,Takehisa Fukui,Hiroya Abe,Manabu Tanaka,Makio Naito, Visual-JW2010, Osaka, Japan, 2010/11
  • Thermoreversible Gelling Slurry for Solid Freeforming Fabrication, Akira Kondo,Kazuo Kuruma,Hiroya Abe,Makio Naito, 3rd International Congress on Ceramics, Symposium 4: Green and Smart Processing, Osaka, Japan, 2010/11
  • Magnetorheological Response of Colloidal Dispersion with Iron Fine Particles, S.Yamanaka,H.Abe,M.Naito,J.Noma,Y.Ueshima,T.Fukui, 7th International Conference on Flow Dynamics, Sendai, Japan, 2010/11
  • カーボンナノチューブ上への金属ナノ粒子の一次元配列制御, 譚 振権、阿部 浩也、内藤 牧男、大原 智, 第71回応用物理学会学術講演会, 長崎, 2010/09
  • Synthesis of Fe nanoparticles by the arc plasma method and their magnetrheology, H.Abe,M.Naito,J.Noma,Y.Ueshima,T.Fukui,T.Kikuchi,J.Furusho, 12th International Conference on Electrorheological fluids and Magnetorheological suspensions, Philadelphia, USA, 2010/08
  • Site-selective synthesis and arrangement of Pd nanoparticles on SDS-functionalized single-walled carbon nanotubes, Zhenquan Tan,Hiroya Abe,Makio Naito,Satoshi Ohara, The 2nd International Solvothermal & Hydrothermal Association Conference (ISHA2010), Beijing, China, 2010/06
  • FRP廃材の循環利用プロセスの開発, 近藤 光、阿部 浩也、内藤 牧男、井須 紀文、三浦 正嗣、森 梓、大村 高広, 粉体工学会2010年度春期研究発表会, 京都, 2010/05
  • Novel Recycling Process of Waste FRP Using Attrition Type Apparatus, Norifumi Isu,Yasuko Okuni,Masashi Miura,Akira Kondo,Hiroya Abe,Makio Naito, 11th International Symposium on Eco-materials Processing and Design (ISEPD2010), Osaka, Japan, 2010/01
  • Novel Recycling Process of Waste FRP Using New Attrition Type Apparatus, Norifumi Isu,Masashi Miura,Yasuko Okuni,Akira Kondo,Hiroya Abe,Makio Naito, 34th International Conference and Exposition on Advanced Ceramics and Composites Meeting Guide, Daytona Beach, 2010/01
  • Site-Selectivity Synthesis of Pd Nanoparticles Decorated-SWCNTs Nanocomposites, Z. Tan,H. Abe,M. Naito,S. Ohara, 2009 MRS Fall Meeting, Boston, USA, 2009/12
  • 多成分共沈法によるLSM-YSZ複合ナノ粒子の合成とSOFCカソード電極への応用, 細川 洋一、木村 圭祐、佐藤 和好、阿部 浩也、内藤 牧男, (社)高温学会 平成21年度秋季総合学術講演会, 大阪, 2009/12
  • 低白金に向けた新規複合触媒の開発, 棟方 裕一、田下 敬光、金村 聖志、近藤 光、内藤 牧男, 第50回電池討論会, 京都, 2009/11
  • タンパク性医薬品の皮下埋込型微小デポ製剤としての有機―無機ハイブリッド微粒子の構造設計, 市川 秀喜、森永 まり子、平野 裕之、福森 義信、阿部 浩也、佐藤 和好、内藤 牧男, 粉体工学会2009年度秋期研究発表会, 大阪, 2009/10
  • 機械的非加熱合成法による機能性複合酸化物の製造プロセスの開発, 中島 宏、河原 正佳、横山 豊和、近藤 光、阿部 浩也、内藤 牧男, 粉体工学会2009年度秋期研究発表会, 大阪, 2009/10
  • アークプラズマナノ粒子合成における熱的ピンチ効果の影響, 野間 淳一、阿部 浩也、山本 健太郎、田中 学、内藤 牧男, 粉体工学会2009年度秋期研究発表会, 大阪, 2009/10
  • シングルナノサイズのイットリア安定化ジルコニアを用いた固体酸化物形燃料電池Ni/YSZアノード電極の開発, 篠崎 良太、木下 暢、佐藤 和好、阿部 浩也、内藤 牧男, (社)日本セラミックス協会第17回秋季シンポジウム, 松山, 2009/09
  • 水溶性マトリックスからのCNTカプセルアセンブリ, Hui Xu、阿部 浩也、内藤 牧男, (社)日本セラミックス協会第17回秋季シンポジウム, 松山, 2009/09
  • 廃FRPの循環利用システムの開発, 近藤 光、阿部 浩也、内藤 牧男、大国 泰子、三浦 正嗣、井須 紀文, (社)日本セラミックス協会第17回秋季シンポジウム, 松山, 2009/09
  • 多成分共沈によるSOFCカソード用LSM-YSZ複合ナノ粒子の合成, 細川 洋一、木村 圭祐、佐藤 和好、阿部 浩也、内藤 牧男, (社)日本セラミックス協会第17回秋季シンポジウム, 松山, 2009/09
  • Metal NPS Decorated-CNTs Nanocomposites, Zhenquan Tan,Hiroya Abe,Makio Naito,Satoshi Ohara, The Third International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials, and Joining Technology for New Metallic Glasses and Inorganic Materials (ICCCI 2009), Kurashiki, Japan, 2009/09
  • Fabrication of Biodegradable Microdevices for Prolonged-release of Proteins by Spray-coating of Porous Hydroxyapatite with Non-covalently Cross-linked Nanoparticulate Chitosan, Mariko Morinaga,Hideki Ichikawa,Hiroya Abe,Kazuyoshi Sato,Makio Naito,Hiroyuki Hirano,Yoshinobu Fukumori, The Third International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials, and Joining Technology for New Metallic Glasses and Inorganic Materials (ICCCI 2009), Kurashiki, Japan, 2009/09
  • Fibrous Composite Powder Compacts for Thermal Insulation at High Temperature, Takahiro Ohmura,Yasuo Ito,Isami Abe,Hiroya Abe,Makio Naito, The Third International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials, and Joining Technology for New Metallic Glasses and Inorganic Materials (ICCCI 2009), Kurashiki, Japan, 2009/09
  • Metallic Nanoparticles Synthesized by Thermally Pinched Arc Plasma, Junichi Noma,Hiroya Abe,Makio Naito,Kentaro Yamamoto,Shinichi Tashiro,Manabu Tanaka, The Third International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials, and Joining Technology for New Metallic Glasses and Inorganic Materials (ICCCI 2009), Kurashiki, Japan, 2009/09
  • Novel Recycling Process of Waste FRP for Advanced Materials, Akira Kondo,Yasuko Okuni,Masashi Miura,Norifumi Isu,Hiroya Abe,Makio Naito, The Third International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials, and Joining Technology for New Metallic Glasses and Inorganic Materials (ICCCI 2009), Kurashiki, Japan, 2009/09
  • Arrangement of Oxide Nanoparticles by DNA, J. Han,S. Ohara,K. Sato,H. Xu,M. Naito,P. Shan, 17th International Conference on Composites or Nano Engineering, Hawaii, USA, 2009/07
  • Feナノ粒子分散コロイドの磁気粘性効果, 野間 淳一、阿部 浩也、内藤 牧男、菊池 武士、古荘 純次, 平成21年春季フルードパワーシステム講演会, 仙台, 2009/06
  • 固定発生源煙道内におけるPM10/PM2.5質量濃度測定用multi-stage VIS Impactorの分級特性, 和田 匡司、金岡 千嘉男、塚田 まゆみ、W. Lenggoro、神谷 秀博、近藤 光、内藤 牧男、小暮 信之、W. W.Szymanski, 粉体工学会第44回技術討論会, 東京, 2009/06
  • ナノ粒子/繊維複合粒子による多孔質材料の作製とその特性評価, 大村 高弘、阿部 勇美、伊藤 泰男、佐藤 和好、阿部 浩也、内藤 牧男, 粉体工学会第44回技術討論会, 東京, 2009/06
  • 燃料電池用粉体複合化における機械的処理条件の影響, 保原 夏朗、萩原 明房、瀧澤 孝一、佐藤 和好、阿部 浩也、内藤 牧男, 粉体工学会第44回技術討論会, 東京, 2009/06
  • ナノ粒子合成のためのアークプラズマ制御 -合成速度と熱的ピンチ効果の関係-, 野間 淳一、阿部 浩也、内藤 牧男、山本 健太郎、田代 真一、田中 学, (社)溶接学会 溶接アーク物理研究会委員会, 東京, 2009/01
  • Novel Co-precipitation Method using Nanocrystalline YSZ Particles for High Perfomance Electrodes of SOFC, K. Sato,T. Kinoshita,H. Abe,M. Naito, The IUMRS International Conference in Asia 2008, Nagoya, Japan, 2008/12
  • 金属ナノ粒子分散系の作製とそのMR特性, 野間 淳一、阿部 浩也、内藤 牧男、田中 学、菊池 武士、古荘 純次, 平成20年度磁性流体連合講演会, 京都, 2008/12
  • Coating of Ceramic Layer on Metallic Materials by Novel Growing Integration Layer [GIL] Method Using Electrochemistry, M.Yoshimura,N.Sugiyama,N.Matsushita,X.Wang,T.Wada,F.Qin,A.Inoue,M.Tsukamoto,M.Naito, The IUMRS International Conference in Asia 2008, Nagoya, Japan, 2008/12
  • Anisotropic Self-Assembly of Ag-CNT Nanocomposites, Z.Tan,S.Ohara,H.Abe,M.Naito, The IUMRS International Conference in Asia 2008, Nagoya, Japan, 2008/12
  • Arc-Derived Fe Nanoparticles for Magnetorheological Fluid, J.Noma,H.Abe,S.Tashiro,M.Tanaka,M.Naito,T.Kikuchi,J. Furusho, The IUMRS International Conference in Asia 2008, Nagoya, Japan, 2008/12
  • Nanoparticle Porous Composites for High Temperature Thermal Insulation, H.Abe,S.Kirihara,M.Naito, The IUMRS International Conference in Asia 2008, Nagoya, Japan, 2008/12
  • Separation of Fibers and Matrix from Waste FRP Using New Attrition Type Apparatus for Thermal Insulation Material, Yasuko Okuni,Masashi Miura,Norifumi Isu,Akira Kondo,Hiroya Abe,Makio Naito, The IUMRS International Conference in Asia 2008, Nagoya, Japan, 2008/12
  • 断熱建材を目的とした摩砕ミルによる廃FRPの分離, 大国 泰子、三浦 正嗣、井須 紀文、近藤 光、阿部 浩也、内藤 牧男, 平成20年度日本セラミックス協会東海支部学術研究発表会, 名古屋, 2008/12
  • 粘弾性コロイドのダイレクトライティングによる3次元ナノ粒子自由集積, 阿部 浩也、近藤 光、内藤 牧男, 日本セラミックス協会関西支部、平成20年度支部セミナー「セラミックスにおけるナノテク最前線」, 京都, 2008/11
  • Influence of Hydrogen Induced Thermal Pinch on Nanoparticle Formation in Arc Plasma, J.Noma,H.Abe,M.Naito,K.Yamamoto,S.Tashiro,M.Tanaka, The 8th International Welding Symposium (8WS), Kyoto, Japan, 2008/11
  • Synthesis and assembly of nanocomposites for rich triple phase boundary in SOFC, K. Sato,G. Okamoto,S. Ohara,M. Naito,H. Abe, Fuel Cell Science and Technology, Copenhagen, Denmark, 2008/10
  • PM10/PM2.5 mass concentration measurement in flue gas of stationary sources by use of multi-stage virtual impactor and cascade impactor, M.Wada,K.Sugiyama,C.Kanaoka,A.Kondo,M.Naito,W.W.Szymanski,N.Kogure,M.Tukada,W.Lenggoro,H.Kamiya, ASE 15, Kanazawa, Japan, 2008/10
  • 粘弾性スラリーによるマイクロコロイド構造体の直接成形, 近藤 光、佐藤 和好、阿部 浩也、内藤 牧男, 日本セラミックス協会第21回秋季シンポジウム, 北九州, 2008/09
  • 固定発生源からのPM10/PM2.5排出挙動測定用in-stack型バーチャルインパクタ, 和田 匡司、近藤 光、塚田 まゆみ、小暮 信之、W. Lenggoro、 W.W.Szymanski、内藤 牧男、金岡 千嘉男、神谷 秀博, 第49回大気環境学会年会, 金沢, 2008/09
  • Human-FriendlyなアクチュエータのためのコンパクトMR流体クラッチ(C-MRFC)の開発, 菊池 武士、大月 喜久子、梯 大吾、古荘 純次、阿部 浩也、野間 淳一、内藤 牧男, 第26回日本ロボット学会学術講演会, 神戸, 2008/09
  • Colloidal MR Fluid with Surface-Stabilized Fe Nanoparticles, H.Abe,J.Noma,M.Naito,T.Kikuchi,J.Furusho, 11th International Conference on Electrorheological Fluids and Magetrheological Suspensions, Dresden, Germany, 2008/08
  • Electrochemically Active Anode for Low Temperature SOFC Derived from Nanocrystalline NiO/YSZ composite, K. Sato,G. Okamoto,H. abe,M. Naito, 8th European SOFC Forum, Luzern、Switzerland, 2008/06
  • Nano-structured Electrode Materials Synthesized via Co-Precipitation with Nanocrystalline YSZ, K. Sato,T. Kinoshita,H. Abe,M. Naito, 8th European SOFC Forum, Luzern、Switzerland, 2008/06
  • Directed Dry-Assembling of Nanocomposites for Active SOFC Electrodes, H. Abe,H. Shimoda,K. Sato,M. Naito, 8th European SOFC Forum, Luzern、Switzerland, 2008/06
  • Development of Cascade Virtual Impactor for a PM10/PM2.5 Emission Behavior In-Stack Measurement from Stationary Sources, Hidehiro Kamiya,Mayumi Tsukada,Akira Kondo,Naoki Fujiwara,Makio Naito,Wladyslaw W. Szymanski, 7th International Symposium Gas Cleaning at High Temperature in Australia, Newcastle, Australia, 2008/06
  • 粉末プロセスを用いたMg合金切削屑のMgB2超伝導体へのアップグレードリサイクル, 南口 誠,丸岡 大佑,尾澤 仁志,鎌土 重晴,阿部 浩也,近藤 光,内藤 牧男, (社)粉体粉末冶金協会 平成20年度春季大会(第101回講演大会), 東京, 2008/05
  • 複合粒子設計による固体酸化物形燃料電池電極の高性能化, 佐藤 和好,阿部 浩也,内藤 牧男, 日本学術振興会第124委員会, 第128回会議, 東京, 2008/04
  • 粉末冶金的手法によるMg合金切削屑のMgB2へのリサイクル, 南口 誠,丸岡 大佑,尾澤 仁志,鎌土 重晴,阿部 浩也,近藤 光,内藤 牧男, (社)日本金属学会 2008春期大会, 東京, 2008/03
  • NiO-YSZナノ複合粒子の多孔質集積化とSOFCアノード電極への応用, 佐藤 和好,阿部 浩也,内藤 牧男, (社)日本セラミックス協会2008年会, 長岡, 2008/03
  • 固定発生源からのPM10/2.5排出挙動測定用としてのエアロゾル分析手法の比較検討, 和田 匡司,近藤 光,W.W.Szymanski,塚田 まゆみ,W.Lenggoro,藤原 尚樹,小暮 信之,内藤 牧男,金岡 千嘉男,神谷 秀博, (社)化学工学会第73年会, 静岡, 2008/03
  • Liquid and Solid Dispersion of Single-Walled Carbon Nanotubes, Hui Xu,Hiroya Abe,Makio Naito,Hideki Ichikawa,Yoshinobu Fukumori,Shigehisa Endoh,Kenji Hata, MRS 2008 Spring Meeting, San Francisco, USA, 2008/03
  • Direct Hetero-assembly Nanosized Oxides for SOFC Electrodes, Kazuyoshi Sato,Hiroya Abe,Makio Naito, MRS 2008 Spring Meeting, San Francisco, USA, 2008/03
  • Nanoparticle Technology Handbook, Masuo Hosokawa,Kiyoshi Nogi,Makio Naito,Toyokazu Yokoyama, Nanoparticle Technology Handbook, Elsevier, 2008
  • Microstructural engineering of SOFC anode by NiO/YSZ nano hybrid powder, K. Sato,H. abe,M. Naito, 32nd International Conference on Advanced Ceramics and composites, Daytona beach, USA, 2008/01
  • Alternative Nanoparticle Ink for Directed Assembly of Ceramic Structures, Hiroya Abe,Akira Kondo,Makio Naito,Jun Akedo, 32nd International Conference & Exposition on Advanced Ceramics & Composites, Florida, USA, 2008/01
  • Nanohybrid Design of SOFC Electrodes for Rich Triple-phase-boundary, Kazuyoshi Sato,Hiroya Abe,Makio Naito,Satoshi Ohara, 32nd International Conference & Exposition on Advanced Ceramics & Composites, Florida, USA, 2008/01
  • 固定発生源からのPM10/2.5排出挙動測定用in-stack型マルチステージバーチャルインパクター, 和田 匡司,近藤 光,W.W.Szymanski,塚田 まゆみ,W.Lenggoro,藤原 尚樹,小暮 信之,内藤 牧男,金岡 千嘉男,神谷 秀博, 第13回流動化・粒子プロセッシングシンポジウム, 東京, 2007/12
  • パウダープロセシングによるMg合金切削屑のアップグレードリサイクル, 南口 誠,丸岡 大佑,尾澤 仁志,鎌土 重晴,阿部 浩也,近藤 光,内藤 牧男, 平成19年度日本セラミックス協会東北北海道支部研究発表会, 秋田, 2007/11
  • ナノ複合多孔質断熱材の実用化に関する研究, 大村 高弘,伊藤 泰男,阿部 勇美,入村 純一,内藤 牧男,阿部 浩也, (社)日本機械学会熱工学コンファレンス2007, 京都, 2007/11
  • 金属ナノ粒子分散系の作製とそのMR特性, 野間 淳一,阿部 浩也,内藤 牧男,菊池 武士,古荘 純次, 第55回レオロジー討論会, 金沢, 2007/11
  • Influence of Porous Anode Microstructure on the Polarization Characteristics of Solid Oxide Fuel Cell, Jun Abe,Toshiyuki Sano,Takeshi Yamamoto,Mitsukuni Mizuno,Hidetoshi Mori,Makio Naito, 2nd Int. Symp. Smart Process. Tech. (SPT'07), Osaka, Japan, 2007/11
  • Entropy Bridging in Nanoparticle Suspension for Direct Colloidal Writing, Hiroya Abe,Akira Kondo,Kazuyoshi Sato,Makio Naito,Jun Akedo, 2nd Int. Symp. Smart Process. Tech. (SPT'07), Osaka, Japan, 2007/11
  • Synthesis of Fe Nanoparticles by Hydrogen Arc Plasma Method for Compact MR Device, Junichi Noma,Hiroya Abe,Makio Naito,Takehito Kikuchi,Junji Furusho, 2nd Int. Symp. Smart Process. Tech. (SPT'07), Osaka, Japan, 2007/11
  • Nanocrystalline NiO-YSZ Composite Powder for High Performance of Solid Oxide Fuel Cell, Go Okamoto,Kazuyoshi Sato,Hiroya Abe,Makio Naito, 2nd Int. Symp. Smart Process. Tech. (SPT'07), Osaka, Japan, 2007/11
  • Hydroxyapatite Microparticles as a Carrier for Protein Delivery, Yaowalak Boonsongrit,Hiroya Abe,Makio Naito,Hideki Ichikawa,Yoshinobu Fukumori, 2nd Int. Symp. Smart Process. Tech. (SPT'07), Osaka, Japan, 2007/11
  • Dry Porous Coating of Nanopowder for Cathode Electrode of SOFC, Kazuyoshi Sato,Hirofumi Shimoda,Hiroya Abe,Makio Naito, The Sixth Pacific Rim International Conference on Advanced Materials and Processing(PRICM 6), Jeju, Korea, 2007/11
  • ナノ複合多孔質断熱材の実用性能に関する研究, 大村 高弘,伊藤 泰男,阿部 勇美,入村 純一,内藤 牧男,阿部 浩也, 第28回 日本熱物性シンポジウム, 札幌, 2007/10
  • ダイレクトライティングによるコロイド構造体の直接形成, 阿部 浩也,近藤 光,佐藤 和好,内藤 牧男,明渡 純, (社)日本セラミックス協会第20回秋季シンポジウム, 名古屋, 2007/09
  • Preparation of Single-Walled Carbon Nanotubes Dispersion for NanoRisk Evaluation, Hui Xu,Hiroya Abe,Makio Naito,Yoshinobu Fukumori,Hideki Ichikawa,Shigehisa Endoh, 2007/09
  • PLGA Coated Hydroxyapatite as Protein Delivery System, Yaowalak Boonsongrit,Hiroya Abe,Makio Naito,Hideki Ichikawa,Yoshinobu Fukumori, 2007/09
  • DDSのための生分解性ハイブリッドマイクロスフェア, 阿部 浩也,Y.Boonsongrit,佐藤 和好,内藤 牧男,市川 秀喜,福森 義信,吉村 昌弘, (社)日本セラミックス協会第20回秋季シンポジウム, 名古屋, 2007/09
  • Mechanical Milling of Nanoparticles under Electric Discharge, J.Noma,H.Abe,M.Naito,K.Takenaka,Y. Setsuhara, 6th Asian-European Int. Conf. Plasma Surface Eng. (AEPSE 2007), Nagasaki,Japan, 2007/09
  • Dry Deposition of Porous Thick Nanocomposites for Electrochemical Electrodes, H. Abe,H. Shimoda,K. Sato,M. Naito, Materials Science &Technology 2007 Conference and Exhibition (MS&T'07), Detroit, USA, 2007/09
  • Influence of Composite Structure on Electrochemical and Mechanical Properties of Thick Ni-YSZ Anode, K.Sato,G.Okamoto,H.Abe,M.Naito, Tenth International Symposium on Solid Oxide Fuel Cells (SOFC-X), Nara, Japan, 2007/06
  • Dry Coating Technique for Nanosized La0.8Sr0.2MnO3 Powder for SOFC Cathode, H.Abe,H.Shimoda,K.Sato,M.Naito, Tenth International Symposium on Solid Oxide Fuel Cells (SOFC-X), Nara, Japan, 2007/06
  • 固定発生源からのPM2.5分離評価法の比較検討, 和田 匡司,金岡 千嘉男,近藤 光,内藤 牧男,神谷 秀博, 粉体工学会2007年度春期研究発表会, 東京, 2007/05
  • Adsorption and Desorption Behaviors of Protein on Hydroxyapatite, Hiroya Abe,Yaowalak Boonsongrit,Makio Naito,Hideki Ichikawa,Yoshinobu Fukumori,Masahiro Yoshimura, Joint Conference of 1st International Conference on Science and Technology for Advanced Ceramics (STAC) and 2nd International Conference on Joining Technology for New Metallic Glasses and Inorganic Materials (JTMC), Kanagawa, Japan, 2007/05
  • Bioactive Surface Ceramics Formation on Bulk Alloys and Metallic Glasses by Oxidation of Their Components, Masahiro Yoshimura,Naota Sugiyama,Hai-Yan Xu,Takamasa Onoki,Eiichi Yasuda,Tomoaki Watanabe,Nobuhiro Matsushita,Xingmin Wang,Mikio Fukuhara,Akihisa Inoue,Hiroya Abe,Masahiro Tsukamoto,Makio Naito, Joint Conference of 1st International Conference on Science and Technology for Advanced Ceramics (STAC) and 2nd International Conference on Joining Technology for New Metallic Glasses and Inorganic Materials (JTMC), Kanagawa, Japan, 2007/05
  • 複合粒子を用いたSOFC厚膜アノード電極の微構造制御, 佐藤 和好,阿部 浩也,内藤 牧男, (社)日本セラミックス協会2007年年会, 東京, 2007/03
  • ダイレクトライティングのためのスラリーレオロジー制御, 阿部 浩也,佐藤 和好,内藤 牧男,明渡 純, 日本MRS第17回シンポジウム, 東京, 2006/12
  • 機械的手法によるBaTiO3ナノ粒子の非加熱合成, 近藤 光,佐藤 和好,阿部 浩也,内藤 牧男,下田 浩史, (社)高温学会平成18年度秋季総合学術講演会, 大阪, 2006/12
  • ナノ複合多孔質断熱材の熱伝導率, 大村 高弘,伊藤 素男,入村 純一,内藤 牧男,阿部 浩也, 第27回日本熱物性シンポジウム, 京都, 2006/10
  • Mechanochemical Synthesis of Barium Titanate with No Media Balls, A.Kondo,H.Shimoda,K.Sato,H.Abe,M.Naito, ICCCI 2006, Kurashiki, Japan, 2006/09
  • Development of Filtraion Technology for PM2.5 in Diesel Exhaust, M.Yoshikawa,T.Uemura,D.Kan,T.Fukui,T.Charinpanitkul,W.Tanthapanichakoon,M.Naito, ICCCI 2006, Kurashiki, Japan, 2006/09
  • Fabrication of Thick Ni-YSZ Composite Porous Layer for Electrode Supporting SOFC, M.Uemura,K.Sato,H.Abe,M.Naito, ICCCI 2006, Kurashiki, Japan, 2006/09
  • Nanoscale Control of La0.8Sr0.2MnO3 Cathode for Intermediate Temperature Solid Oxide Fuel Cell, K.Sato,J.Chaichanawong,A.Kondo,H.Abe,M.Naito, ICCCI 2006, Kurashiki, Japan, 2006/09
  • Preparation of Controlled Release Microparticles by a Dry Powder Processing, Y.Fukumori,R.Yoshikawa,T. Uemura,H.Ichikawa,K.Sato,H.Abe,M.Naito, ICCCI 2006, Kurashiki, Japan, 2006/09
  • Design of Biodegradable Materials for Preparation of Protein-Containing Prolonged-lease Microcapsules, Y.Fukumori,S.Masui,H.Ichikawa,K.Sato,H.Abe,M.Naito,M. Yoshimura, ICCCI 2006, Kurashiki, Japan, 2006/09
  • Fumed Alumina/SiC Porous Composite for Efficient Thermal Insulation at High Temperature, H.Abe,I.Abe,M.Naito, ICCCI 2006, Kurashiki, Japan, 2006/09
  • Evaluation of the Long Term Stability of LSM/ScSZ Composite Powder Materials for SOFC Cathodes, A.Hagiwara,N.Hobara,H.Shimada,K.Takizawa,K.Sato,H.Abe,M.Naito, ICCCI 2006, Kurashiki, Japan, 2006/09
  • Influence of Water Content of Starting Powder Mixture on the Mechanochemical Synthesis of Strontium Doped Lamthanum Maganite, J.Chaichanawong,K.Sato,H.Abe,T.Charinpanitkul,W.Tanthapanichakoon,M.Naito, ICCCI 2006, Kurashiki, Japan, 2006/09
  • 粉体プロセスによる先進セラミックスの信頼性向上, 篠原 伸広,堀田 禎,阿部 浩也,内藤 牧男,植松 敬三, (社)日本セラミックス協会第19回秋季シンポジウム, 山梨, 2006/09
  • 機械的手法による複合酸化物ナノ粒子の非加熱合成, 近藤 光,佐藤 和好,阿部 浩也,内藤 牧男,下田 浩史, (社)日本セラミックス協会第19回秋季シンポジウム, 山梨, 2006/09
  • 固体酸化物形燃料電池空気極へのLSM/ScSZ複合粒子の適用, 萩原 明房,保原 夏朗,瀧澤 孝一,佐藤 和好,阿部 浩也,内藤 牧男, (社)日本セラミックス協会第19回秋季シンポジウム, 山梨, 2006/09
  • 複合スラリー調製によるSOFCアノード電極の複合構造制御, 佐藤 和好,上村 眞康,近藤 光,阿部 浩也,内藤 牧男, (社)日本セラミックス協会第19回秋季シンポジウム, 山梨, 2006/09
  • ナノ粒子ボンディングによる超低熱伝導断熱材の開発, 阿部 浩也,阿部 勇美,佐藤 和好,内藤 牧男, (社)日本セラミックス協会第19回秋季シンポジウム, 山梨, 2006/09
  • Duplex Processing with Mechanical Milling and Plasma Irradiation for Surface Modification of Nanoparticles, Hiroya Abe,Kosuke Takenaka,Akira Kondo,Yuichi Setsuhara,Makio Naito, Tenth International Conference on Plasma Surface Engineering, Garmisch-Partenkirchen, Germany, 2006/09
  • Nanostructural Control of Inorganic Materials by Biomineralization, N.Ykoo,M.Umetsu,T.Togashi,K.Tsumoto,S.Ohara,T.Naka,H.Abe,M.Naito,I.Kumagai,T.Adschiri, ISHR & ICSTR 2006, Sendai, Japan, 2006/08
  • Mechanosynthesis of Lanthanum Manganite Nanopowder Assisted with Water, M.Naito,H.Abe,K.Sato,A.Kondo, ISHR & ICSTR 2006, Sendai, Japan, 2006/08
  • Mechanically Induced Nanoparticle Bonding between Hydoxyl Surfaces, H.Abe,I.Abe,M.Naito, ISHR & ICSTR 2006, Sendai, Japan, 2006/08
  • Microstructural Control of Composite Anode for Anode Supported Intermediate Temperature Solid Oxide Fuel Cells, K.Sato,M.Uemura,A.Kondo,H.Abe,M.Naito,K.Nogi, CIMTEC 2006, Sicily, Italy, 2006/06
  • Surface Modification of Nanopowder by Milling under Electric Discharge, H.Abe,A.Kondo,K.Takenaka,Y.Setsuhara,M.Naito, CIMTEC 2006, Sicily, Italy, 2006/06
  • NiO-YSZ複合粒子を用いたSOFCアノード電極の微構造制御と高性能化, 佐藤 和好,阿部 浩也,内藤 牧男, (社)高温学会平成18年度春季総合学術講演会, 大阪, 2006/05
  • Ni-YSZ多孔質厚膜の構造と特性, 佐藤 和好,近藤 光,阿部 浩也,内藤 牧男, (社)日本セラミックス協会2006年年会, 東京, 2006/03
  • 微粉砕プロセスのナノ粒子リアクターへの展開, 佐藤 和好,阿部 浩也,内藤 牧男, (社)日本セラミックス協会2006年年会, 東京, 2006/03
  • 複合粒子のエアロゾルデポジションによるセラミック複合膜の作製, 阿部 浩也,高嶋 雅之,内藤 牧男,明渡 純, 第16回日本MRS学術シンポジウム, 東京, 2005/12
  • 媒体フリーメカノケミカル法によるLaMnO3ナノ粒子の低温合成, 佐藤 和好,阿部 浩也,内藤 牧男,金子 賢治, (社)高温学会 平成17年度秋季総合学術講演会, 大阪, 2005/12
  • NH3プラズマ照射によるTiO2ナノ粒子の表面改質, 阿部 浩也,佐藤 和好,内藤 牧男,竹中 弘祐,節原 裕一, 第16回日本MRS学術シンポジウム, 日本大学駿河台校舎, 2005/12
  • Nanoscale Design of Porous Composites for Solid Oxide Fuel Cells, H. Abe,K. Murata,T. Fukui,K. Kaneko,M. Naito, International Symposium on Smart Processing Technology, 大阪, 2005/11
  • Microstructual Control of LSM/YSZ Composite Cathode for Lower Temperature Operation of SOFC, J. Chaichanawong,K. Sato,H. Abe,K. Murata,T. Fukui,T,Charinpanitkul,W. Tanthapanichakoon,M. Naito, International Symposium on Smart Processing Technology, 大阪, 2005/11
  • Analysis of Carbon Spherical Substance Generated by Arc Electric Discharge, J. Chaichanawong,K. Sato,H. Abe,K. Murata,T. Fukui,T,Charinpanitkul,W. Tanthapanichakoon,M. Naito, International Symposium on Smart Processing Technology, Osaka, 2005/11
  • Protein Engineering for Bio-Inspired Zinc Oxide Materials, M. Umetsu,M. Mizuta,T. Togashi,N. Yokko,K. Tsumoto,S. Ohara,S. Takami,H. Abe,H. Watanabe,M. Naito,I. Kumagai,T. Adschiri, International Symposium on Smart Processing Technology, 大阪, 2005/11
  • Aqueous Dispersibility and Surface Conditions of Fine Alumina Powder, K. Sato,H. Abe,M. Naito, International Symposium on Smart Processing Technology, 大阪, 2005/11
  • アルミナ表面の洗浄が液中分散性におよぼす影響, 佐藤 和好,阿部 浩也,内藤 牧男, 粉体工学会2005年度秋期研究発表会, 大阪, 2005/10
  • Nanoparticle bonding technique for advanced materials, M. Naito,H. Abe, Int. Conf. on Porous Ceramic Materials (PCM2005), Brugge, Belgium, 2005/10
  • Nanoscale design of hybrid porous materials for SOFC, H. Abe,K. Sato,M. Naito,K. Murata,T. Fukui,W. J. Moon,K. Kaneko, Int. Conf. on Porous Ceramic Materials (PCM2005), Brugge, Belgium, 2005/10
  • 音響波を利用したノズルフリーインクジェット成形技術, 阿部 浩也,釜井 正善,内藤 牧男,野城 清, 第42回粉体に関する討論会, 岐阜, 2005/09
  • ドライプロセスによるシリカナノ多孔体の作製とその機能, 阿部 勇美,伊藤 泰男,佐藤 和好,阿部 浩也,内藤 牧男, (社)日本セラミックス協会第18回秋季シンポジウム, 大阪, 2005/09
  • LSM-YSZ複合粒子の粉体構造がSOFCカソードの構造と特性に及ぼす影響, 佐藤 和好,Jintawat Chaichanawong,阿部 浩也,内藤 牧男,村田 憲司,福井 武久, (社)日本セラミックス協会第18回秋季シンポジウム, 大阪, 2005/09
  • 機械的手法によるLaMnO3ナノ粒子の合成とその反応過程の解析, 佐藤 和好,阿部 浩也,内藤 牧男,金子 賢治, (社)日本セラミックス協会第18回秋季シンポジウム, 大阪, 2005/09
  • Ultra-Nanoscopic Characterization of Nano-Powders and Particles by Transmission Electron Microscopes, K. Kaneko,K. Nakashima,A. Umemoto,H. Abe,M. Naito, 6th Pacific Rim Conference on Ceramic and Glass Technology, Maui, USA, 2005/09
  • Fibrous Nanparticle Composites for Highly Efficient Thermal Insulation, H. Abe,K. Sato,M. Naito,Y. Itoh,I. Abe, 6th Pacific Rim Conference on Ceramic and Glass Technology, Maui, USA, 2005/09
  • Influence of Calcination on Aqueous Dispersibility and Surface Conditions of Fine Alumina Powder, K. Sato,H. Abe,M. Naito, 6th Pacific Rim Conference on Ceramic and Glass Technology, Maui, USA, 2005/09
  • TEM Observation of MgB2 Films Sputtered on Alpha-Al2O3 Substrate, K. Kaneko,W. Moon,H. Abe,M. Naito, 6th Pacific Rim Conference on Ceramic and Glass Technology, Maui, USA, 2005/09
  • 水蒸気雰囲気下でのメカノケミカル反応によるLaMnO3ナノ粒子の合成, 佐藤 和好,阿部 浩也,内藤 牧男,野城 清,福井 武久, (社)粉体粉末冶金協会第95回講演大会, 東京, 2005/06
  • 浸液透光-偏光顕微鏡法を用いたアルミナ成形体中の粗大欠陥の観察, 佐藤 和好,阿部 浩也,内藤 牧男,堀田 禎,斉藤 豊,植松 敬三, (社)高温学会平成17年度春季総合学術講演会, 大阪, 2005/05
  • Nanoscale Control of LSM-YSZ Composites by Advanced Mechanical Method for SOFCs, K. Sato,H. Abe,M. Naito,K. Takizawa,A. Hagiwara, 107th Annual Meeting, Exposition & Technology Fair of The American Ceramic Society, Baltimore, USA, 2005/04
  • Dry Powder Processing of High-Porosity Microporous Composites, H. Abe,M. Naito,I. Abe, 107th Annual Meeting, Exposition & Technology Fair of The American Ceramic Society, Baltimore, USA, 2005/04
  • シリカナノ粒子と無機繊維の機械的複合化における雰囲気の影響, 阿部 勇美,佐藤 和好,阿部 浩也,内藤 牧男, (社)日本セラミックス協会2005年年会, 岡山, 2005/03
  • LaMnO3ナノ粒子のメカノケミカル合成における水蒸気の影響, 佐藤 和好,阿部 浩也,内藤 牧男,文 元振,金子 賢治, (社)日本セラミックス協会2005年年会, 岡山, 2005/03
  • 雰囲気制御下での機械的作用によるナノ粒子合成, 佐藤 和好,阿部 浩也,内藤 牧男, 第15回日本MRS学術シンポジウム, 東京, 2004/12
  • 成形プロセス条件がAlN焼結体の微構造および特性に及ぼす影響, 佐藤 和好,阿部 浩也,内藤 牧男,野城 清,堀田 禎,多々見 純一, (社)高温学会 平成16年度秋季総合学術講演会, 大阪, 2004/12
  • 集束音響波を利用したノズルフリーインクジェット成形, 阿部 浩也,釜井 正善,内藤 牧男,野城 清, (社)日本セラミックス協会第17回秋季シンポジウム, 石川, 2004/09
  • ナノ粒子ボンディングによるナノポーラス繊維の作製とその構造, 阿部 勇美,阿部 浩也,内藤 牧男, (社)日本セラミックス協会第17回秋季シンポジウム, 石川, 2004/09
  • スラリー調製条件がソフトフェライト焼結体特性に及ぼす影響, 上村 眞康,佐藤 和好,阿部 浩也,内藤 牧男, (社)日本セラミックス協会第17回秋季シンポジウム, 石川, 2004/09
  • 機械的手法によるLaMnO3系酸化物の低温合成, 佐藤 和好,阿部 浩也,内藤 牧男,鏡淵 英紀,瀧澤 孝一,萩原 明房, (社)日本セラミックス協会第17回秋季シンポジウム, 石川, 2004/09
  • サファイア面方位を利用したAlN/MgB2界面ナノ構造制御, 阿部 浩也,内藤 牧男,金子 賢治,斉藤 敦, (社)高温学会 平成16年度春季総合学術講演会, 大阪, 2004/06

Publications

  • 「ソサエティー5.0を目指した次世代粉体技術ガイダンス ? IoT, AI, 粉体計測とシミュレーションの最新動向 - 」、「化学装置」2021年9月号別冊, 内藤 牧男, (株)工業通信, 2021/08
  • エレクトロニクス用セラミックスの開発、評価手法と応用, 内藤 牧男, (株)技術情報協会, ISBN:9784861047985, 2020/08
  • 全固体電池の界面抵抗低減と作製プロセス、評価技術, 小澤 隆弘、近藤 光、内藤 牧男, 技術情報協会, ISBN:9784861047800, 2020/03
  • Powder Technology Handbook, Fourth Edition, Makio Naito,Hidehiro Kamiya, CRC Press, ISBN:9781138739222, 2020/01
  • Novel Structured Metallic and Inorganic Materials, Takahiro Kozawa,Makio Naito, Springer, ISBN:9789811376108, 2019/07
  • Research and Innovation in Advanced Engineering Materials, Makio Naito,Andrzej Buchacz,Andrzej Baier,Pavel Topala,Dumitru Nedelcu, ModTech Publication House, ISBN:9786069370452, 2019/06
  • Introduction of Powder Unit Operations, Makio Naito, ktc-densen, 2018/11
  • Novel Technology for the Control of Surface and Composite Structure of Powder Materials, Makio Naito, Techno System, ISBN:9784924728813, 2018/07
  • Nanoparticle Technology Handbook Third Edition, Makio Naito,Toyokazu Yokoyama,Kohei Hosokawa,Kiyoshi Nogi, Elsevier, ISBN:9780444641106, 2018/03
  • Pocketbook of powder technology terminology, Makio Naito, The Nikkan Kogyo Shimbun, Ltd., ISBN:9784526077432, 2017/09
  • Novel powder processing technology for the development of new materials, Makio Naito, CMC Publishing Co., Ltd., ISBN:9784781312415, 2017/03
  • Improvement of all-solid-state battery and the development of its manufacturing technology, Makio Naito,Takahiro Kozawa,Akira Kondo, Technical Information Institute Co., Ltd, ISBN:9784861046476, 2017/02
  • Additive Manufacturing and Strategic Technologies in Advanced Ceramics, Kiyoshi Shimamura,Soshu Kirihara,Jun Akedo,Tatsuki Ohji,Makio Naito,Mrityunjay Singh,Alexander Michaelis, Wiley-American Ceramic Society, ISBN:9781119236009, 2016/05
  • Green and Sustainable Manufacturing of Advanced Materials, Makio Naito,Akira Kondo, Elsevier, ISBN:9780124114975, 2015/08
  • Introduction to powder science and technology, Makio Naito,Naoki Noda,Hisao Makino, The Nikkan Kogyo Shimbun, Ltd., ISBN:9784526073281, 2014/11
  • Production and preparation methods of powder and nanoparticles, Makio Naito, Techno System Co., Ltd., ISBN:9784924728721, 2014/11
  • Powder Technology Handbook, Makio Naito, Asakura Publishing Co., Ltd., ISBN:9784254252675, 2014/02
  • Innovative Processing and Manufacturing of Advanced Ceramics and Composites II, Makio Naito, Wiley, ISBN:9781118771501, 2014/01
  • Particulate Products -Tailoring Properties for Optimal Performance- (Particle Technology Series, Vol.19), Makio Naito, Springer, ISBN:9783319007137, 2014/01
  • Modern Technology and Applications of Metal Nano-and Microparticles, H. Abe,A. Kondo,M. Naito, CMC Publishing Co., Ltd., ISBN:9784781308272, 2013/11
  • Structural Control of Powder and Particles: Surface Modifications and Their Processing Techniques, Makio Naito, Technical Information Institute Co., Ltd, 2013/09
  • Справочник по технологии наночастиц ( Nanoparticle Technology Handbook ), Masuo Hosokawa,Kiyoshi Nogi,Makio Naito,Toyokazu Yokoyama, Научный мир ( Scientific World Publishing House ), ISBN:9785915222310, 2013/05
  • Nanoparticle Technology Handbook, The Second Edition, Masuo Hosokawa,Kiyoshi Nogi,Makio Naito,Toyokazu Yokoyama, Elsevier, ISBN:9780444563361, 2012/03
  • Fuel Cell Basic Technology, Makio Naito,Akira Kondo, JOHOKIKO CO., LTD., ISBN:9784905545200, 2011/12
  • Introduction of Powder Technology, Makio Naito,Hisao Makino, Morikita Publishing Co., Ltd., ISBN:9784769342397, 2011/12
  • Handbook of Chemical Engineering, 7th Edition, Makio Naito, Maruzen, ISBN:9784621083888, 2011/09
  • Powder Science & Technologies for Advanced Battery Development, Makio Naito,Hiroya Abe, CMC Publishing Co., Ltd., ISBN:9784781303222, 2011/04
  • Introduction to Powder Materials Design, Makio Naito,Hisao Makino,Junichi Tatami,Katsutoshi Komeya, The Nikkan Kogyo Shimbun, Ltd., ISBN:9784526066580, 2011/03
  • Advanced Powder Technology for Battery Development, Makio Naito,Kiyoshi Kanamura,Hirokazu Munakata,Hisao Makino, The Nikkan Kogyo Shimbun, Ltd., ISBN:9784526065712, 2010/11
  • Characterization and Control of Interfaces for High Quality Advanced Materials III, Kevin Ewsuk,Makio Naito,Tomoyuki Kakeshita,Soshu Kirihara,Keizo Uematsu,Hiroya Abe, WILEY, ISBN:9780470909171, 2010/08
  • Introduction of Powder Technology, Makio Naito,Hisao Makino, Kogyo Chosakai Publishing Co., Ltd., ISBN:9784769342397, 2010/06
  • Powder technology for energy and environmental issues, Makio Naito,Hisao Makino, The Nikkan Kogyo Shimbun, Ltd., ISBN:9784526064036, 2010/02
  • Progress of silicon nitride ceramics, Kazuyoshi Sato,Makio Naito, Uchida Rokakuho Publishing Co., Ltd.,, ISBN:9784753651986, 2009/10
  • Introduction of powder technology for its application, Makio Naito,Hisao Makino, Kogyo Chosakai Publishing Co., Ltd., 2009/09
  • Nanoparticle grinding and dispersion for their application, Makio Naito,Hiroya Abe, JOHOKIKO CO., LTD., ISBN:9784904080306, 2009/07
  • Creation of ultimate shapes with powders, Makio Naito, The Nikkan Kogyo Shimbun, Ltd., ISBN:9784526062773, 2009/05
  • Dictionary of Ceramics, Makio Naito, Asakura Publishing Co., Ltd., ISBN:9784254252514, 2009/05
  • Slurry characterization and its processing, Makio Naito,Akira Kondo, JOHOKIKO CO., LTD., ISBN:9784904080085, 2008/08
  • Creation of ultimate powders - Key to success for development of next-generation materials -, Makio Naito, THE NIKKAN KOGYO SHIMBUN,LTD, ISBN:9784526060106, 2008/02
  • Nanoparticle Technology Handbook, Masuo Hosokawa,Kiyoshi Nogi,Makio Naito,Toyokazu Yokoyama, ELSEVIER, ISBN:9780444531223, 2007/11
  • ナノパーティクルテクノロジーハンドブック, 内藤 牧男, 日刊工業新聞社, ISBN:9784526056642, 2006/04
  • ナノパーティクルテクノロジーハンドブック, 内藤 牧男, 日刊工業新聞社, ISBN:9784526056642, 2006/04
  • ナノパーティクルテクノロジーハンドブック, 内藤 牧男, 日刊工業新聞社, ISBN:9784526056642, 2006/04
  • Power Technology Handbook,Third Edition, Naito Makio, CRC Press, ISBN:9781574447828, 2006/02
  • 表面・界面工学大系・下巻, 内藤 牧男,阿部 浩也, (株)テクノシステム, ISBN:9784924728493, 2005/11
  • ナノマテリアル工学大系・第1巻ニューセラミックス・ガラス, 阿部 浩也,内藤 牧男, (株)フジ・テクノシステム, ISBN:9784938555979, 2005/10
  • ナノマテリアル工学大系・第1巻ニューセラミックス・ガラス, 内藤 牧男, (株)フジ・テクノシステム, ISBN:9784938555979, 2005/10
  • 先進セラミックスの作り方と使い方, 内藤 牧男, (株)日刊工業新聞社, 2005/03
  • 先進セラミックスの作り方と使い方, 内藤 牧男, (株)日刊工業新聞社, 2005/03
  • 表面・界面工学大系・上巻・基礎編, 阿部 浩也,内藤 牧男, (株)フジ・テクノシステム, 2005/03
  • 新時代の多孔性材料とその応用‐ナノサイエンスが作る新材料, 内藤 牧男,阿部 浩也, (株)シーエムシー出版, 2004/11
  • 有機、無機材料における表面処理・改質の上手な方法とその評価, 内藤 牧男,阿部 浩也, (株)技術情報協会, 2004/03
  • ナノテクノロジー大事典, 内藤 牧男,阿部 浩也,横山 豊和, (株)工業調査会, 2003/12
  • 混練・分散の基礎と先端的応用技術, 内藤 牧男,阿部 浩也, (株)テクノシステム, 2003/11
  • ナノパーティクル・テクノロジー, 監修 細川益男 編著 野城 清, (株)日刊工業新聞社, 2003/11
  • ナノ微粒子の調製及び分散・凝集コントロールとその評価, 内藤 牧男,堀田 禎, (株)技術情報協会, 2003/05
  • Handbook of Advanced Ceramics, Naito Makio,Nobuhiro Shinohara,Keizo Uematsu, Elsevier Academic Press, 2003/01
  • Functionalization and Surface Treatment of NANOPARTICLES, Kamiya Hidehiro,Makio Naito, American Scientific Publishers, 2003/01
  • 微粒子工学大系第2巻 応用技術, 内藤 牧男, (株)フジ・テクノシステム, 2002/01
  • 図解・ナノテクノロジーのすべて, 神谷 秀博,内藤 牧男, (株)工業調査会, 2001/11
  • アトマイゼーション・テクノロジー, 内藤 牧男, 森北出版(株), 2001/11
  • 微粒子工学大系第1巻 基本技術, 内藤 牧男, (株)フジ・テクノシステム, 2001/10
  • 微粒子工学大系第1巻 基本技術, 内藤 牧男, (株)フジ・テクノシステム, 2001/10
  • 微粒子工学大系第1巻 基本技術, 内藤 牧男, (株)フジ・テクノシステム, 2001/10
  • 粉体工学用語辞典、第2版, 内藤 牧男, (株)日刊工業新聞社, 2000/03
  • 微粒子の付着・凝集メカニズムと実用系における評価、制御, 内藤 牧男, (株)技術情報協会, 2000/01
  • 粒子設計工学, 内藤 牧男, 産業図書株式会社, 1999/02
  • New Characterization Techniques to Control the Manufacturing Process of Fine Ceramics, Naito Makio,Tadashi Hotta,Osamu Hayakawa,Nobuhiro Shinohara,Masataro Okumiya,Keizo Uematsu, Am. Ceram. Soc, 1999/01
  • 粉体工学便覧 第2版, 内藤 牧男, (株)日刊工業新聞社, 1998/03
  • 実用粉粒体プロセス技術, 内藤 牧男, (株)粉体と工業社, 1997/08
  • マテリアル破壊応用ハンドブック, 内藤 牧男, (株)サイエンスフォーラム, 1997/05
  • 化学工学の進歩30、微粒子制御, 内藤 牧男, 槇書店, 1996/10
  • 微粒子工学 -分散の基礎と応用-, 内藤 牧男,豊立 勝二, (株)朝倉書店, 1994/06
  • 最近の化学工学45 粉粒体工学, 内藤 牧男, (株)化学工業社, 1993/11
  • 実用表面改質技術総覧, 内藤 牧男, (株)産業技術サービスセンター, 1993/03
  • 粉体 その機能と応用, 内藤 牧男, (財)日本規格協会, 1991/11
  • ファインケミカルシリーズ、90年代の食品加工技術, 内藤 牧男, (株)シーエムシー, 1990/06
  • 超微粒子開発応用ハンドブック, 横山 藤平,内藤 牧男, (株)サイエンスフォーラム, 1989/04
  • 新版 機械工学便覧, 内藤 牧男, 日本機械学会, 1988/11
  • 入門粉体プラント設計, 横山 藤平,内藤 牧男,坂下 摂, (株)工業調査会, 1988/10
  • 最新粉体の材料設計, 横山 藤平,内藤 牧男, (株)テクノシステム, 1988/06

Industrial Property Rights

  • 粉体膜形成装置, 阿部 浩也,近藤 光,佐藤 和好,内藤 牧男,下田 浩史,福井 武久, 特許第4784989号, 特願2006-189824, 出願日:2006/07, 登録日:2011/07
  • 吸音遮熱材、自動車エンジン用排気系遮熱カバ-及びそれらの製造方法, 内藤 牧男,阿部 浩也,竹 滋雄,丹羽 隆弘,後藤 嘉彦,佐伯 尚彦,福井 武久, 特許第4712315号, 特願2004-149084, 出願日:2004/05, 登録日:2011/04
  • 磁気粘性流体及び磁気粘性流体の製造方法, 野間 淳 一、阿部 浩也、内藤 牧男、菊池 武士、古荘 純次, 特許第4675398号, 特願2008-169418, 出願日:2008/06, 登録日:2011/02
  • 粉体処理方法、及び、粉体処理装置, 阿部 浩也、内藤 牧男、野城 清、福井 武久、吉川 雅浩, 特許第4580339号, 特願2005-500928, 出願日:2003/11, 登録日:2010/09
  • 複合多孔体の製造方法, 内藤 牧男,阿部 浩也,伊藤 泰男,田原 大示, 特許第4439970号, 特願2004-102578, 出願日:2004/03, 登録日:2010/01
  • 多孔体被覆繊維及び断熱材, 内藤 牧男,阿部 浩也,伊藤 素男,大村 高弘,吉川 雅浩,福井 武久, 特許第4386411号, 特願2003-279280, 出願日:2003/05, 登録日:2009/10
  • 多孔体被覆粒子、並びに前記多孔体被覆粒子を含有する断熱材用前駆体及び断熱材, 内藤 牧男,阿部 浩也,伊藤 素男,大村 高広,福井 武久,吉川 雅浩, 特許第4367612号, 特願2003-316772, 出願日:2003/09, 登録日:2009/09
  • Porous body-coated fiber, porous body-coated particle, and formed article using the same, Naito Makio,Abe Hiroya,Ito Yasuo,Ohmura Takahiro,Fukui Takehisa,Yoshikawa Masahiro, US 7,250,212, 出願日:2004/05, 登録日:2007/07
  • 樹脂無機複合構造体の製造法及び樹脂無機複合膜構造体, 明渡 純,阿部 浩也,内藤 牧男, 特許第3981737号, 特願2004-043714, 出願日:2004/02, 登録日:2007/07
  • 複合構造化・粒子分散材料, 高尾 泰正,山東 睦夫,内藤 牧男, 特許第3564534号, 特願2000-246129, 出願日:2000/08, 登録日:2004/06
  • 粒子分散材料のレオロジー特性の測定技術、及びそれを用いた評価装置, 高尾 泰正,山東 睦夫,内藤 牧男, 特許第3393381号, 特願2000-246636, 出願日:2000/08, 登録日:2003/01
  • 複合粒子の製造方法、並びにその方法により得られた複合粒子, 丹野 浩一,内藤 牧男, 特許第3328783号, 特願平04-178778, 出願日:1992/05, 登録日:2002/07
  • 金属粉末からの酸素除去方法, 野城 清,内藤 牧男,吉川 雅弘,近藤 光, 特許第3229354号, 特願平04-039934, 出願日:1992/02, 登録日:2001/09
  • 超電導体原料の製法, 神保 元二,横山 豊和,近藤 光,内藤 牧男,吉川 雅浩, 特許第3043363号, 特願平02-133269, 出願日:1990/05, 登録日:2000/03
  • 超電導薄膜用粉末タ-ゲット材原料及び粉末タ-ゲット材、並びにそれらの製法, 内藤 牧男,吉川 雅浩, 特許第2791780号, 特願昭63-324058, 出願日:1988/12, 登録日:1998/06
  • 粉体処理装置, 加藤 正史,吉川 雅浩,内藤 牧男,水井 克也, 特許第2706140号, 特願平01-175327, 出願日:1989/07, 登録日:1997/10
  • 被覆正極活物質、及びその製造方法, 内藤 牧男,小澤 隆弘,他3名, 特願2021-058117, 出願日:2021/03
  • ガーネット型複合金属酸化物粒子とその製造方法、及びガーネット型複合金属酸化物の圧縮成形物, 内藤 牧男、他, 19855682.1, 出願日:2021/03
  • 被覆正極活物質、リチウムイオン二次電池の製造方法及びリチウムイオン二次電池, 内藤 牧男,小澤 隆弘,他3名, 17/192,975, 出願日:2021/03
  • ガーネット型複合金属酸化物粒子とその製造方法、及びガーネット型複合金属酸化物の圧縮成形物, 内藤 牧男、他, 17/184,147, 出願日:2021/02
  • ガーネット型複合金属酸化物粒子とその製造方法、及びガーネット型複合金属酸化物の圧縮成形物, 内藤 牧男、他, 201980056193.3, 出願日:2021/02
  • ガーネット型複合金属酸化物及びその製造方法, 内藤 牧男、他2名, 201980051658.6, 出願日:2021/02
  • ガーネット型複合金属酸化物及びその製造方法, 内藤 牧男、他2名, 17/163,804, 出願日:2021/02
  • 固体電解質, 内藤 牧男, PCT/JP2021/003720, 出願日:2021/02
  • 被覆正極活物質、リチウムイオン二次電池の製造方法及びリチウムイオン二次電池, 内藤 牧男,小澤 隆弘,他3名, 特願2020-541030, 出願日:2020/12
  • 断熱充填材、断熱材、断熱構造, 内藤 牧男、他3名, 特願2020-529066, 出願日:2020/11
  • ガーネット型複合金属酸化物粒子とその製造方法、及びガーネット型複合金属酸化物の圧縮成形物, 内藤 牧男、他, 特願2020-540159, 出願日:2020/10
  • ガーネット型複合金属酸化物及びその製造方法, 内藤 牧男、他2名, 特願2020-533491, 出願日:2020/10
  • 固体電解質, 内藤 牧男、他1名, 特願2020-018115, 出願日:2020/02
  • 断熱充填材、断熱材、断熱構造, 内藤 牧男、他3名, 特願2019-235489, 出願日:2019/12
  • ガーネット型複合金属酸化物粒子とその製造方法、及びガーネット型複合金属酸化物の圧縮成形物, 内藤 牧男、他, PCT/JP2019/029383, 出願日:2019/07
  • ガーネット型複合金属酸化物及びその製造方法, 内藤 牧男、他2名, PCT/JP2019/029382, 出願日:2019/07
  • 断熱充填材、断熱材、断熱構造, 内藤 牧男、他3名, PCT/JP2019/026834, 出願日:2019/07
  • 被覆正極活物質、リチウムイオン二次電池の製造方法及びリチウムイオン二次電池, 内藤 牧男,小澤 隆弘,他3名, PCT/JP2019/025451, 出願日:2019/06
  • YAG蛍光体用複合粒子、YAG蛍光体及び発光装置, 内藤 牧男、他2名, 特願2019-110268, 出願日:2019/06
  • 機械化学的変性方法及び変性装置, 内藤 牧男、小澤 隆弘,他, 特願2018-230855, 出願日:2018/12
  • 被覆正極活物質及びリチウムイオン二次電池の製造方法, 内藤 牧男、小澤 隆弘, 特願2018-167978, 出願日:2018/09
  • ガーネット型複合金属酸化物粒子とその製造方法、及びガーネット型複合金属酸化物の圧縮成形物, 内藤 牧男、他, 特願2018-161931, 出願日:2018/08
  • ガーネット型複合金属酸化物及びその製造方法, 内藤 牧男,他, 特願2018-147004, 出願日:2018/08
  • 断熱充填材、断熱材、断熱構造, 内藤 牧男,他, 特願2018-129047, 出願日:2018/07
  • 機械化学的変性方法及び変性装置, 小澤 隆弘,内藤 牧男,他, 特願2017-239507, 出願日:2017/12
  • 無機化合物の製造方法, 金井 和章,内藤 牧男, PCT/JP2016/064420, 出願日:2016/05
  • 無機化合物の製造方法, 金井 和章,内藤 牧男, 特願2015-190173, 出願日:2015/09
  • 蛍光体及びその製造方法, 金井 和章,内藤 牧男, 特願2015-133594, 出願日:2015/07
  • 正極複合粒子の製造方法, 古賀 英行,内藤 牧男,近藤 光,小澤 隆弘,松岡 光昭, 特願2015-129617, 出願日:2015/06
  • YAG蛍光体用複合粒子、YAG蛍光体及びその製造方法, 金井 和章、松本 一昭、内藤 牧男, 特願2015-057332, 出願日:2015/03
  • 活物質材料、電池、および活物質材料の製造方法, 吉田 淳、中西 真二、内藤 牧男、阿部 浩也、近藤 光, 特願2012-135718, 出願日:2012/06
  • Powder Processing Apparatus, Makio Naito,HIroya Abe,Kiyoshi Nogi,Masuo Hosokawa,Takehisa Fukui,Masahiro Yoshikawa, US 7,905,434 B2, 出願日:2011/03
  • Powder Processing Method, Makio Naito,HIroya Abe,Kiyoshi Nogi,Masuo Hosokawa,Takehisa Fukui,Masahiro Yoshikawa, US 7,686,238 B2, 出願日:2010/05
  • 複合セラミックス粉体及びその製造方法並びに固体酸化物形燃料電池, 木下 暢、佐藤 和好、阿部 浩也、内藤 牧男, 特願2008-314958, 出願日:2008/12
  • 複合セラミックス粉体及びその製造方法並びに固体酸化物燃料電池, 木下 暢,佐藤 和好,阿部 浩也,内藤 牧男, 特願2008-168633, 出願日:2008/06
  • 磁気粘性流体及び磁気粘性流体の製造法, 野間 淳一,阿部 浩也,内藤 牧男,菊池 武士,古荘 純次, 特願2007-270093, 出願日:2007/10
  • 金属ガラス生体活性化法および生体活性化金属ガラス, 吉村 昌弘,小野木 伯薫,安田 榮一,渡辺 友亮,田邊 靖博,赤尾 勝,松下 伸広,杉山 直大,千川 康人,内藤 牧男,塚本 雅裕,小溝 裕一,阿部 浩也,阿部 信行,井上 明久,王 新敏,和田 武,朱 勝利,秦 風香,福原 幹夫, 特願2007-232225, 出願日:2007/09
  • 生体活性化材料, 吉村 昌弘,小野木 伯薫,安田 榮一,渡辺 友亮,田邊 靖博,赤尾 勝,松下 伸広,杉山 直大,千川 康人,内藤 牧男,塚本 雅裕,小溝 裕一,阿部 浩也,阿部 信行,井上 明久,王 新敏,和田 武,朱 勝利,秦 風香,福原 幹夫, 特願2007-232224, 出願日:2007/09
  • ダイレクトライティング用コロイドゲル材料, 阿部 浩也,近藤 光,佐藤 和好,内藤 牧男,明渡 純, 特願2007-192641, 出願日:2007/07
  • 繊維強化プラスチックの処理方法及びその粉砕物, 服部 泰子,三浦 正嗣,加藤 嘉洋,井須 紀文,阿部 浩也,近藤 光,内藤 牧男, 特願2007-023517, 出願日:2007/02
  • 粉体膜形成装置及び粉体膜形成方法, 阿部 浩也,佐藤 和好,内藤 牧男,下田 浩史,吉川 雅浩, 特願2006-309394, 出願日:2006/11
  • 粉体膜形成装置, 内藤 牧男,阿部 浩也,佐藤 和好,野城 清,福井 武久, 特願2006-150160, 出願日:2004/11
  • 合成粉体製造方法、及び、粉体処理装置, 内藤 牧男,阿部 浩也,佐藤 和好,野城 清,福井 武久, 特願2006-021966, 出願日:2004/07
  • 吸音遮熱材、自動車エンジン用排気系遮熱カバ-及びそれらの製造方法, 内藤 牧男,阿部 浩也,竹 滋雄,丹羽 隆弘,後藤 嘉彦,佐伯 尚彦,福井 武久, 特願2004-149084, 出願日:2004/05
  • 液滴配列方法および液滴配列装置, 野城 清,釜井 正善,阿部 浩也,内藤 牧男, 特願2004-092247, 出願日:2004/03
  • 樹脂無機複合構造体の製造法及び樹脂無機複合膜構造, 明渡 純,阿部 浩也,内藤 牧男, 特願2004-000319, 出願日:2004/02
  • 粒子分散液の製造方法, 阿部 浩也,内藤 牧男,野城 清,福井 武久, 特願2003-410243, 出願日:2003/12
  • 合成粉体製造方法, 福井 武久,村田 憲司,内藤 牧男,阿部 浩也,野城 清, 特願2003-415188, 出願日:2003/12
  • 粉体処理装置及び多孔質造粒物の製造方法, 阿部 浩也,内藤 牧男,野城 清,福井 武久,吉川 雅浩, 特願2003-279280, 出願日:2003/07
  • 粉体処理方法及び粉体処理装置, 内藤 牧男,阿部 浩也,野城 清,細川 益男, 特願2003-176115, 出願日:2003/06
  • 電極材および固体酸化物形燃料電池用燃料極並びに固体酸化物形燃料電池, 福井 武久,内藤 牧男,阿部 浩也,野城 清, 2002-370598, 出願日:2002/12
  • 化合物粒子の製造方法, 近藤 光,横山 豊和,内藤 牧男,阿部 浩也,野城 清,松田 元秀,三宅 通博, 2002-291243, 出願日:2002/10
  • 固体酸化物形燃料電池用燃料極及び燃料極材料製造方法, 福井 武久,近藤 光,横山 豊和,内藤 牧男,阿部 浩也,野城 清, 2002-291242, 出願日:2002/10
  • 粒子分散材料中の粒子充填構造の測定技術、およびそれを用いた評価装置, 高尾 泰正,山東 睦夫,内藤 牧男,植松 敬三, 2000-246644, 出願日:2000/08
  • 粒子分散材料のレオロジ-特性の測定技術、およびそれを用いた評価装置, 高尾 泰正,山東 睦夫,内藤 牧男, 2000-2446636, 出願日:2000/08
  • 複合構造化・粒子分散材料, 高尾 泰正,山東 睦夫,内藤 牧男, 2000-246129, 出願日:2000/08
  • 粉砕混合装置増量装置, 内藤 牧男,福井 武久,吉田 泰三,朝日 正三, 2002-35625, 出願日:2000/07
  • 複合セラミックス粉末及びその製造方法, 福井 武久,大川 元,大原 智,内藤 牧男,堀田 禎,野城 清, 特願2000-180105, 出願日:2000/06
  • セラミックス材料及びその製造方法, 高橋 実,水野 敬友,内藤 牧男,阿部 浩也,福井 武久,情野 香, 2001-278672, 出願日:2000/03
  • セラミックス多孔体及びその製造方法, 出原 清二,川住 圭史,安田 益雄,横山 豊和,永徳 久登,高橋 実,内藤 牧男,福井 武久, 2001-261463, 出願日:2000/03
  • セラミックス多孔体の製造方法, 高橋 実,水野 敬友,内藤 牧男,福井 武久,大原 智,阿部 浩也, 2000-264755, 出願日:1999/03
  • 粉粒体用付着力測定装置, 彼谷 憲美,内藤 牧男,神谷 秀博, 11-326167, 出願日:1998/05
  • 溶融炭酸塩型燃料電池の空気極材料及びその製造方法, 福井 武久,大川 元,内藤 牧男,堀田 禎, 11-233121, 出願日:1998/02
  • 顆粒体の圧密特性評価方法, 椿淳 一郎,森 英利,内藤 牧男,横山 豊和, 11-173965, 出願日:1997/12
  • 懸濁液中の粒子間相互作用力の評価方法, 椿淳 一郎,内藤 牧男,横山 豊和, 09-318521, 出願日:1996/06

Awards

  • KONA賞, 内藤 牧男, (公財)ホソカワ粉体工学振興財団, 2019/12
  • 粉体工学会2015年度技術賞, 金井 和章,福井 祥文,小澤 隆弘,近藤 光,内藤 牧男, 粉体工学会, 2015/10
  • Best Poster Presentation, H. Abe,A. Kondo,M. Naito,T. Yogo, The 3rd International Symposium on Advanced Materials Development and Integration of Novel Structural Metallic and Inorganic Materials (AMDI-3), 2012/11
  • 粉体工学会2012年度技術賞, 大國 友行、宮本 欽生、阿部 浩也、内藤 牧男, 粉体工学会, 2012/11
  • Academician, 14 th Election, Makio Naito, World Academy of Ceramics, 2012/06
  • Fellow of The Society, Makio Naito, The American Ceramic Society, 2010/10
  • The 8th International Welding Symposium (8WS), The Best Poster ASTOM R&D Award, Junichi Noma,Hiroya Abe,Makio Naito,Kentaro Yamamoto,Shinichi Tashiro,Manabu Tanaka, Japan Welding Society, 2008/11
  • The Best Poster Award, Makio Naito, The 6th International Symposium & Exhibition on Gas Cleaning at High Temperatures, 2005/10
  • 粉体工学情報センター学術奨励賞(IP賞), 内藤 牧男, 粉体工学情報センター, 2003/08
  • The Richard M. Fulrath Award of The American Ceramic Society, Makio Naito, The American Ceramic Society, 2002/04
  • 粉体工学会1993年度上滝論文賞, 内藤 牧男, 粉体工学会, 1994/02

Presentations

  • High Quality Advanced Ceramics by the Microstructure Control of Particles and Powders, Makio Naito, 8th International Congress on Ceramics (ICC8), 2021/04
  • 初歩から学ぶ粉砕技術-基礎から応用まで―, 内藤 牧男, 国際粉体工業展東京2020、粉体機器ガイダンス, 2020/11
  • 私たちの生活を支える粉体とは?, 内藤 牧男, 韮崎大村美術館主催ワークショップ、「先端技術が開く日本画天然岩絵具の新展開~粉体工学から染色まで~」, 2020/11
  • 私たちの生活を支える粉体の話, 内藤 牧男, (一社)粉体工学会主催、芸術と粉体工学に関するワークショップ2020年度第1回研究会, 2020/11
  • 粉体とは?, 内藤 牧男, (一社)粉体工学会主催、第1回粉体塾, 2020/09
  • 微粒子・粉体の構造制御による材料の特性向上と高機能化, 内藤 牧男、小澤 隆弘、近藤 光, 日本セラミックス協会 基礎科学部会主催、第58回セラミックス基礎科学討論会, 2020/01
  • 私たちの生活を支える粉体の話, 内藤 牧男, (一社)粉体工学会主催、2019年度第2回芸術と粉体工学に関するワークショップ, 2019/11
  • 粉砕技術の応用と今後の展開, 内藤 牧男, (一社)日本粉体工業技術協会主催粉体エンジニア早期養成講座「粉砕」, 2019/11
  • 粉砕とは?, 内藤 牧男, (一社)日本粉体工業技術協会主催粉体エンジニア早期養成講座「粉砕」, 2019/11
  • Numerical Simulation for Analysis and Design of Powder Processing, Junya Kano,Kizuku Kushimoto,Shingo Ishihara,Akira Kondo,Takahiro Kozawa,Makio Naito, Visual-JW 2019 & WSE 2019, 2019/11
  • Microstructure control of advanced materials and their applications by smart powder processing, Makio Naito,Takahiro Kozawa,Akira Kondo, International Symposium on Powder Processing Technology for Advanced Ceramics, 2019/11
  • 初歩から学ぶ粉砕技術―基礎から応用までー, 内藤 牧男, 粉体工業展大阪2019、粉体機器ガイダンス, 2019/10
  • 粉体構造制御による材料の品質向上と高機能化への展開, 内藤 牧男, (一社)日本粉体工業技術協会主催、テクノプラザ2019, 2019/10
  • 機械的手法を用いた粒子合成技術の開発, 金井 和章、内藤 牧男, 2019年度資源・素材関係学協会合同秋季大会, 2019/09
  • Importance of Powder Processing for High Performance Advanced Ceramics, Makio Naito, 1st Taiwan-Japan Workshop on Powder Processing Technology for High Quality Products, 2019/09
  • 粉体を使いこなすためには?, 内藤 牧男, (一社)粉体工学会主催、2019年度第1回芸術と粉体工学に関するワークショップ, 2019/08
  • 不均質構造制御による材料特性の向上, 内藤 牧男, (一社)日本粉体工業技術協会粉砕分科会主催、2019年度第1回粉砕分科会, 2019/07
  • 粉体工学会の発展に向けて―新たな融合と連携―, 内藤 牧男, 粉体工学会2019年度第1回「不均質構造の利用と制御に関するワークショップ」, 2019/06
  • こうすればできるセラミックスの評価1:粉体・焼結体構造評価, 内藤 牧男, 日本セラミックス協会主催、2019年度セラミックス大学(CEPRO 2019), 2019/06
  • Nano/microstructure control of advanced materials and their applications by smart powder processing, Makio Naito,Takahiro Kozawa,Akira Kondo, ModTech 2019, 2019/06
  • Microstructure control for high quality advanced materials by smart powder processing, Makio Naito,Takahiro Kozawa,Akira Kondo, The Eleventh International Conference on High-Performance Ceramics (CICC-11), 2019/05
  • Smart Powder Processing for Advanced Material, Makio Naito, International Workshop on Ceramics for Sustainable Society, 2019/05
  • Nano-microstructure control of advanced materials and their applications by smart powder processing, Makio Naito, Invited lecture at Guangdong University of Technology, 2018/12
  • 粉砕技術の応用と今後の展開, 内藤 牧男, 日本粉体工業技術協会主催粉体エンジニア早期養成講座, 2018/10
  • 粉砕とは?, 内藤 牧男, 日本粉体工業技術協会主催粉体エンジニア早期養成講座, 2018/10
  • Nano/microstructure control of advanced materials by smart powder processing, Makio Naito, Invited lecture at Faculty of Material Science and Ceramics of AGH University of Science and Technology, 2018/10
  • ものづくりを支える粉体工学, 内藤 牧男, 女子美術大学・(一社)粉体工学会連携シンポジウム, 2018/09
  • Smart Powder Processing for Advanced Functional Materials, Makio Naito,Takahiro Kozawa,Akira Kondo, International Conference on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE 2018), 2018/07
  • こうすればできるセラミックスの評価1:粉体・焼結体構造評価, 内藤 牧男, 日本セラミックス協会主催平成30年度セラミックス大学(CEPRO 2018), 2018/06
  • Smart Powder Processing for Advanced Functional Materials, Makio Naito,Takahiro Kozawa,Akira Kondo, ModTech 2018, 2018/06
  • Nano/Microstructure Control of Advanced Materials and their Applications by Smart Powder Processing, Makio Naito,Takahiro Kozawa,Akira Kondo, 14th International Ceramics Congress (CIMTEC2018), 2018/06
  • Smart powder processing of advanced materials for sustainable society, Makio Naito,Takahiro Kozawa,Akira Kondo, Sandia Powder Processing and Characterization Summit, 2018/01
  • Smart powder processing of advanced materials for sustainable society, Makio Naito,Takahiro Kozawa,Akira Kondo, 42 nd International Conference & Exposition on Advanced Ceramics and Composites, 2018/01
  • 粉砕技術の応用と今後の展開, 内藤 牧男, (一社)日本粉体工業技術協会主催粉体エンジニア早期養成講座「粉砕」, 2017/10
  • 粉砕とは?, 内藤 牧男, (一社)日本粉体工業技術協会主催粉体エンジニア早期養成講座「粉砕」, 2017/10
  • 先進セラミックス信頼性向上のための不均質構造評価, 内藤 牧男, 粉体工学会2017年度第2回粉体材料設計研究会, 2017/10
  • Nano/microstructure control of advanced materials by smart powder processing, M.Naito,T.Kozawa,A.Kondo, Advanced Ceramics and Application VI, 2017/09
  • ナノ粒子・複合粒子のスマートな製造プロセス開発とその応用, 内藤 牧男, 山口東京理科大学コロキウム, 2017/08
  • こうすればできるセラミックスの評価1「粉体・焼結体構造評価」, 内藤 牧男, 日本セラミックス協会主催セラミックス大学2017, 2017/06
  • Powder Characterization Methods for High Quality Advanced Ceramics, Makio Naito, ModTech 2017, 2017/06
  • Mechanical processing of electrode materials for Lithium-ion batteries, Takahiro Kozawa,Akira Kondo,Makio Naito, 3rd MSE-JWRI Workshop on Materials Design and Joining, 2017/05
  • Powder characterization methods for high quality advanced materials, M.Naito, 92th DKG Annual Meeting in conjunction with the Symposium on High‐Performance Ceramics, 2017/03
  • ナノ粒子・複合粒子のスマートな製造プロセス開発とその応用, 内藤 牧男, 同志社大学先端複合材料研究センター2016年度末研究成果発表会, 2017/02
  • Fabrication of electrode materials for lithium-ion batteries by a simple mechanical process, Takahiro Kozawa,Shinji Suzuki,Makio Naito, Sandia Powder Summit, 2017/01
  • Collapse Probability of Granules in Ceramic Powder Compact during Cold Isostatic Pressing, K.Yasuda,S.Tanaka,M.Naito, 41 st International Conference & Exposition on Advanced Ceramics and Composites, 2017/01
  • Smart Powder Processing for Advanced Materials, M. Naito,T. Kozawa,A. Kondo, Sandia Powder Summit, 2017/01
  • Smart powder processing of advanced materials for energy and environments, M. Naito,T. Kozawa,A. Kondo, 41 st International Conference & Exposition on Advanced Ceramics and Composites, 2017/01
  • Smart powder processing of advanced materials and their recycling, M. Naito,A. Kondo,T. Kozawa, 41 st International Conference & Exposition on Advanced Ceramics and Composites, 2017/01
  • Smart Powder Processing for Advanced Materials, M. Naito, Materials Science Lectures Series, 2016/12
  • 初歩から学ぶ粉砕技術 ―基礎から応用まで?, 内藤 牧男, 国際粉体工業展東京2016、粉体機器ガイダンス「粉砕」, 2016/12
  • 材料特性向上のための粒子・粉体の構造制御, 内藤 牧男,小澤 隆弘,近藤 光, 粉体工学会2016年度秋期研究発表会, 2016/11
  • 材料特性向上のための粒子・粉体の構造制御, 内藤 牧男,小澤 隆弘,近藤 光, 粉体工学会第3回機能性粉体プロセス研究会, 2016/11
  • Size- and Shape-controlled Colloidal Fluid of Surface-modified Iron Oxide Magnetic Fine Particles: The Magnetorheological Property, Kiyoshi KANIE,Yasufumi ODA,Jun YABUKI,Shinya YAMANAKA,Masaki MATSUBARA,Hiroya ABE,Makio NAITO,Atsushi MURAMATSU, Symposium on the Research Activities of Joint Usage / Research Center on Joining and Welding, 2016/10
  • 粉砕におけるトラブル対策, 内藤 牧男, (一社)日本粉体工業技術協会主催第4回粉体エンジニア早期養成講座「粉砕」, 2016/10
  • ナノ粒子、微粒子の複合化技術とその応用, 内藤 牧男, 色材協会関西支部主催、色材分散講座―分散の基礎と応用―, 2016/07
  • こうすればできるセラミックスの評価Ⅰ:粉体・焼結体構造評価, 内藤 牧男, 日本セラミックス協会主催、セラミックス大学2016、ベーシックコース, 2016/06
  • Smart Powder Processing for Advanced Materials, M. Naito,T. Kozawa,A. Kondo, ModTech 2016, 2016/06
  • Smart Powder Processing for Advanced Materials and Sustainable Development, M. Naito,T. Kozawa,A. Kondo,M. Matsuoka, 2016 International Symposium based on bilateral cooperation between Shanghai Institute of Ceramics (SICCAS) and Joining and Welding Research Institute (JWRI), Osaka University, 2016/02
  • Smart Powder Processing for Advanced Materials, M. Naito,T. Kozawa,A. Kondo,M. Matsuoka, 40th International Conference & Exposition on Advanced Ceramics and Composites, 2016/01
  • Smart powder processing to create nanocomposite structures and their applications for advanced materials, Makio Naito,Takahiro Kozawa,Akira Kondo, Advances in Materials & Processing Technologies (AMPT 2015), 2015/12
  • 粉砕におけるトラブル対策, 内藤 牧男, (一社)日本粉体工業技術協会主催第8回粉体エンジニア早期養成講座「粉砕」, 2015/11
  • セラミックス信 頼性向上のための不均質構造評価とその制御, 内藤 牧男,小澤 隆弘, 粉体工学会第2回機能性粉体プロセス研究会, 2015/11
  • 微粒子・粉体の特性制御とその応用展開, 内藤 牧男,小澤 隆弘,近藤 光, 大阪市都市型産業振興センター主催、粉体処理技術展2015特別講演, 2015/08
  • 高機能材料製造に関わる粉体技術, 内藤 牧男,小澤 隆弘,近藤 光, 日本粉体工業技術協会主催第6回アドホック講座, 2015/07
  • こうすればできるセラミックスの 評価Ⅰ:粉体・焼結体構造評価, 内藤 牧男, 日本セラミックス協会主催、セラミックス大学2015、ベーシックコース, 2015/06
  • Smart recycling of composite materials for high-functional applications, Makio Naito, 11th International Conference on Ceramic Materials and Components for Energy and Environmental Applications, 2015/06
  • One-step mechanical method to create composite particles and its applications for advanced materials, Makio Naito, 11th International Conference on Ceramic Materials and Components for Energy and Environmental Applications, 2015/06
  • One-step Synthesis of Cathode Materials for Lithium-Ion Batteries by Mechanical Proces, T. Kozawa,E. Nakamura,H. Tarui,A. Kondo,M. Matsuoka,M. Naito, 2nd JWRI-MSE Workshop on Materials Design and Joining 2015, 2015/01
  • Smart powder processing to create nanocomposite structure and its applications for advanced materials, Makio Naito,Akira Kondo,Takahiro Kozawa,Eri Nakamura,Hiroya Abe, Award symposium organized by Shanghai Institute of Ceramics, 2014/11
  • ナノ粒子複 合化プロセスの開発とその応用展開―材料開発からリサイクルまで, 内藤 牧男,近藤 光,小澤 隆弘, 国際粉体工業展東京2014, 最新情報フォーラム「ナノマテリアル」, 2014/11
  • 機械的手法によるスマートな微粒子設計とその応用展開 -材料開発からリサイクルまで-, 内藤 牧男,近藤 光,小澤 隆弘, 粉体工学会・粉砕の高度利用研究会主催 第1回機能性粉体プロセス研究会, 2014/11
  • One-step Mechanical Method to Create Nanocomposite Structure and its Applications for Advanced Materials, Makio Naito,Akira Kondo,Takahiro Kozawa, Advanced Ceramics and Application III, 2014/09
  • Smart Synthesis of Nanocomposite Particles by Mechanical Processing and its Applications, Makio Naito,Akira Kondo,Takahiro Kozawa,Hiroya Abe, ModTech 2014, 2014/07
  • One-step Mechanical Processing to Create Composite Particles for Advanced Materials, Makio Naito,Akira Kondo,Takahiro Kozawa,Eri Nakamura,Hiroya Abe, 4th International Symposium on SiAlONs and Non-oxides, ISSNOX4, 2014/05
  • 粒子複合化による材料の微細構 造制御とその応用展開, 内藤 牧男, 第165回フィラー研究会(第31回総会), 2014/01
  • One-pot mechanical process to make nanocomposite structure for advanced materials, Makio Naito,Takhiro Kozawa,Akira Kondo,Hiroya Abe, 38th International Conference & Exposition on Advanced Ceramics and Composites, 2014/01
  • Smart powder processing to produce advanced ceramics, Makio Naito, 38th International Conference & Exposition on Advanced Ceramics and Composites, 2014/01
  • Magnetorheological response of iron-based colloidal suspensions for smart joining, Hiroya Abe,Akira Kondo,Shinya Yamanaka,Makio Naito, International Conference on Processing & Manufacturing of Advanced Materials (THERMEC'2013), 2013/12
  • Electrostatic dry powder coating for functional composite films, Hiroya Abe,Akira Kondo,Makio Naito,Takashi Wakimoto,Masayuki Yamaguchi, International Conference on Processing & Manufacturing of Advanced Materials (THERMEC'2013), 2013/12
  • 微粒子複合化プロセスの開発と その応用展開, 内藤 牧男, 第53回北海道粉体技術研究会, 2013/11
  • One-pot Mechanical Process to Develop Advanced Materials, Makio Naito,Akira Kondo,Takahiro Kozawa,Hiroya Abe, 4th International Symposium on Advanced Ceramics and Technology for Sustainable Energy Applications toward a Low Carbon Society (ACTSEA 2013), 2013/11
  • ビルドアップ粒子複合化とSOFC電極開発, 阿部 浩也、近藤 光、内藤 牧男, 日本セラミックス協会 第26回秋季シンポジウム, 2013/09
  • 材料開発における粉体構造制御の重要性, 内藤 牧男、阿部 浩也、近藤 光、小澤 隆弘, 日本セラミックス協会第26回秋季シンポジウム, 2013/09
  • One-step Mechanical Processing to Create Nanocomposite Structure and Its Applications for Advanced Materials, Makio Naito,Hiroya Abe,Akira Kondo, European Congress and Exhibition on Advanced Materials and Processes (EUROMAT2013), 2013/09
  • 材料開発における粉体構造制御の役割, 内藤 牧男、阿部 浩也、近藤 光, 粉体工学会第49回夏期シンポジウム, 2013/07
  • Dry Electrostatic Assembly of Composite Particlesfor Li Ion Battery, Hiroya Abe,Akira Kondo,Makio Naito,Takashi Wakimoto,Masayuki Yamaguchi, The 7th Conference on Science and Technology of Advanced Ceramics (STAC7), 2013/06
  • One-pot Mechanical Processing to Create Nanocomposite Particles for Advanced Materials, Makio Naito,Akira Kondo,Hiroya Abe, 1 st International Conference, Modern Technologies in Industrial Engineering, 2013/06
  • Smart Powder Processing for Energy and Environment, Makio Naito, The 10 th Pacific Rim Conference on Ceramic and Glass Technology (PACRIM10), 2013/06
  • Synthesis and Assembly of Nanocomposite for Solid Oxide Fuel Cells, Hiroya Abe,Akira Kondo,Makio Naito, 1st Japan-Taiwan Workshop on Materilas Design and Joining, 2013/05
  • 微粒子接合 による複合多孔構造の制御とその応用, 内藤 牧男、阿部 浩也、近藤 光, 粉体粉末冶金協会平成25年度春季大会, 2013/05
  • ナノ粒子複合化プロセスの開発と その応用展開, 内藤 牧男, 日本セラミックス協会平成25年度東海支部大会特別講演会, 2013/04
  • セラミックスは作り方によってこんなに変わる, 内藤 牧男, 日本学術振興会第124委員会等主催特別セミナー「先進セラミックスの作り方 と使い方」, 2013/03
  • 粒子複合化プロセスの開発とエネルギー分野への展開, 内藤 牧男, 群馬大学次世代エコ・エネルギーシステム研究会・群馬大学客員セミナー・群馬県地域結集事業合同講演会, 2013/01
  • Nanocomposite Powder Processing for Active Electrochemical Electrodes, Hiroya Abe,Akira Kondo,Makio Naito, 5th Tsukuba international coating symposiumu 2012, 2012/11
  • 粉の使い方入門―粉の使い方次第 で材料特性は大きく変わる, 内藤 牧男, 日刊工業新聞社主催、粉体工学会等協賛、セミナー「材料特性向上と高品質化のための粉体設計入門」, 2012/10
  • Development of Advanced Composite Materials and Novel Material Recycling by Particle Bonding Technology, Makio Naito, The 16 th International Conference ModTech 2012, Modern Technologies, Quality and Innovation, 2012/05
  • 粒子・粉体接合に よる省エネ・省資源へのアプローチ, 内藤 牧男、阿部 浩也、近藤 光, 日本化学会、第92春季年会, 2012/03
  • セラミックスは作り方によってこんなに変わる, 内藤 牧男, 日本学術振興会第124委員会等主催特別セミナー「先進セラミックスの作り方 と使い方」, 2012/02
  • High performance thermal insulators made by smart powder processing, Makio Naito,Hiroya Abe,Akira Kondo, International Conference on Energy Efficient Materials Manufacturing Methods & Machineries for Ceramic Industries (IC2E4MCI-11), 2011/12
  • Smart Powder Processing for Energy-saving and Material Recycling, Makio Naito,Hiroya Abe,Akira Kondo, International Conference on Clean Coal Technology and Fuel Cells (CCT & FCs-2011), 2011/11
  • ナノ粒子接合による軽量・高性能断熱 材料の開発, 内藤 牧男, 大阪大学ナノ理工学人材育成産学コンソーシアム主催、平成23年度第3回ナノ理工学情報交流会, 2011/10
  • 粉の使い方で材料特性は大きく変わる, 内藤 牧男, 日刊工業新聞社主催、粉体工学会等協賛、出版記念特別セミナー「粉体材料設計入門講座」, 2011/10
  • Smart Powder Processing for Sustainable Applications, Makio Naito,Hiroya Abe,Akira Kondo, 3rd International Symposium on Advanced Ceramics and Technology for Sustainable Energy and Applications (ACTSEA-2011), 2011/10
  • Smart Powder Processing for Green Technologies, Makio Naito,Hiroya Abe,Akira Kondo, Materials Science & Technology 2011 (MS&T'11), 2011/10
  • Smart Powder Processing for Energy and Environment, Makio Naito,Hiroya Abe,Akira Kondo, First International Conference on Sustainable Chemistry, 2011/07
  • セラミックス信頼性向上のための粉体 構造制御, 内藤 牧男, 日本粉体工業技術協会等主催、粉体技術セミナー, 2011/04
  • セラミックスは作り方によってこんなに変わる, 内藤 牧男, 日本学術振興会 第124委員会等主催特別セミナー「先進セラミックスの作り方と使い方」, 2011/03
  • ナノ粒子、粉体の接合プロセスとその応用, 内藤 牧男, 京都発明協会主催、第31期新工業材料ゼミナール, 2011/02
  • Smart Powder Processing for Energy and Environments, Makio Naito,Hiroya Abe,Akira Kondo, 35th International Conference & Exposition on Advanced Ceramics and Composites, 2011/01
  • 難処理複合廃材のワンポットプロセスによる循環再生利用に関するモデル研究, 内藤 牧男, 平成22年度循環型社会形成推進研究発表会, 2010/12
  • 省エネルギー・省資源を実現する粉体技術, 内藤 牧男, 日刊工業新聞社主催、粉体工学会等協賛、特別セミナー「究極のエネルギーと環境調和の鍵を握る粉体技術」, 2010/12
  • Thermal Pinching of Arc Plasma for Nanoparticle Generation, Hiroya Abe,Junichi Noma,Yuya Ueshima,Takehisa Fukui,Manabu Tanaka,Makio Naito, 7th international conference on flow dymanics, 2010/11
  • Smart Powder Processing for Clean Energy and Energy-saving, Makio Naito, Clean Energy Technology and Fuel Cells Workshop 2010, 2010/11
  • Characterization and control of nanoparticle dispersion behavior for smart processing in liquid phase, Hidehiro Kamiya,Motoyuki Iijima,Shun Takenouchi,Chihiro Iinuma,Makio Naito, Visual-JW2010, 2010/11
  • Direct Colloidal Joining and Co-firing for Anode-Supported SOFCs, Hiroya Abe,Akira Kondo,Makio Naito,Jun Akedo, Materials Science & Technology (MS&T) 2010, 2010/10
  • セラミックスは作り方によってこんなに変わる, 内藤 牧男, 日本学術振興会 第124委員会等主催特別セミナー「先進セラミックスの作り方と使い方」, 2010/09
  • 粉体接合による環境・エネルギー分野への展開, 内藤 牧男, 粉体工学会 平成22年度第2回粉体接合研究会, 2010/09
  • Smart Powder Processing for Advanced Materials, Makio Naito, International Conference on Electronic Materials 2010 (IUMRS-ICEM 2010), 2010/08
  • 粒子接合プロセスによる環境・エネルギー分野への展開, 内藤 牧男, 群馬大学次世代エコエネルギーシステム研究会平成22年度第2回講演会, 2010/05
  • Nanoparticle Inks for Direct-Writing of Ceramic Components, H.Abe,A. Kondo,Z. Tan,K. Sato,M.Naito,J. Akedo, 6th International Conference and Exhibition on Ceramic Interconnect and Ceramic Microsystems Technologies (CICMT 2010), 2010/04
  • セラミックスは作り方によってこんなに変わる, 内藤 牧男, 日本学術振興会124委員会等主催特別セミナー「先進セラミックスの作り方と使い方」, 2010/03
  • Smart Powder Processing for Advanced Materials, Makio Naito,Hiroya Abe,Akira Kondo, 34th International Conference and Exposition on Advanced Ceramics and Composites (ICACC), 2010/01
  • オンデマンド材料のためのナノコロイド立体プリンティング, 阿部 浩也,近藤 光,内藤 牧男,明渡 純, 第19回日本MRS学術シンポジウム, 2009/12
  • Smart Powder Processing for Composite Materials, Makio Naito, Joint Workshop between Smart Processing Research Center and Sate Key Lab of Metal Matrix Composites, 2009/12
  • Smart Powder Processing for Advanced Materials, Makio Naito, The 1st Green Growth Forum, 2009/11
  • 水溶性マトリックスからのCNTカプセルアセンブリ, Hui Xu,阿部 浩也,内藤 牧男, (社)日本セラミックス協会第22回秋季シンポジウム, 2009/09
  • 粉体の特性制御による材料の高機能化, 内藤 牧男, ニューセラミックス懇話会 第188回研究会 産技研技術セミナー, 2009/08
  • 新規なスマートコーティング材料, 内藤 牧男, (財)生産開発科学研究所主催,平成21年度(第25回)新材料・新技術利用研究会, 2009/06
  • 環境・エネルギーを支える粉体工学 第II部: 粉体の構造制御と環境・エネルギーへの応用展開, 内藤 牧男, 粉体工学会第55回粉体工学研究講習会, 2009/06
  • セラミックスは作り方によってこんなに変わる, 内藤 牧男, 日本学術振興会第124委員会等主催特別セミナー「先進セラミックスの作り方と使い方」, 2009/03
  • Composite Manufacturing and Recycling by Advanced Powder Processing for Energy and Environments, Makio Naito,Hiroya Abe,Kazuyoshi Sato,Akira Kondo,Norifumi Isu, 33rd International Conference & Exposition on Advanced Ceramics and Composites, 2009/01
  • 究極の粉の作り方と使い方, 内藤 牧男, 日刊工業新聞社,大阪大学接合科学研究所産学連携研究会共催特別セミナー, 2008/12
  • Nanoparticle Dispersed Fluid for Reversible Colloidal Joining, H.Abe,J.Noma,M.Naito,T.Kikuchi,J.Furusho, 8th International Symposium of the Japan Welding Society (8WS), 2008/11
  • 粒子ボンディングによる材料のナノ・マイクロ構造制御, 内藤 牧男, (社)日本材料学会 第31回材料講習会「ナノ材料最前線」, 2008/11
  • Composite Materials Processed by Particle Bonding for Energy and Environments, Makio Naito,Hiroya Abe,kazuyoshi Sato, The 9th International Symposium on Ceramic Materials and Components for Energy and Environmental Applications, 2008/11
  • Nanoparticle/polymer composite fluid for reversible colloidal, H.Abe,J.Noma,M.Naito, MS&T '08, 2008/10
  • 微粒子複合構造制御による材料の高機能化と応用展, 内藤 牧男, 化学工学会第40回秋季大会, 2008/09
  • セラミックスは作り方によってこんなに変わる, 内藤 牧男, 日刊工業新聞社主催,日本学術振興会124委員会共催セミナー「先進セラミックスの作り方と使い方」, 2008/03
  • Structural control of composite materials by nanoparticle processing, Makio Naito, 2nd International Symposium on SiAlONs and Non-Oxides, 2007/12
  • セラミックスは作り方によってこんなに変わる, 内藤 牧男, 日刊工業新聞社主催,日本学術振興会124委員会共催セミナー「先進セラミックスの作り方と使い方」, 2007/10
  • 粉砕を利用した粒子の機能化とその応用, 内藤 牧男, 粉体工学会北海道談話会主催 平成19年度微粒子工学講演会, 2007/09
  • Nanoparticle Characterization for Improving Material Properties, Makio Naito,Hiroya Abe, Materials Science & Technology 2007 Conference and Exhibition, 2007/09
  • ナノ粒子プロセッシングによるナノ・マイクロ高機能材料の創製, 内藤 牧男, 色材協会関西支部主催 色材セミナー -微細加工技術の現状と課題-, 2007/04
  • セラミックスは作り方によってこんなに変わる, 内藤 牧男, 日刊工業新聞社主催,日本学術振興会124委員会共催セミナー「先進セラミックスの作り方と使い方」, 2006/11
  • ドライプロセスによるナノ粒子・粉体の構造制御と応用, 内藤 牧男, (社)新化学発展協会主催 微粒子・クラスタWG講演会, 2006/08
  • Nanoparticle Bonding Technology for Advanced Materials, M. Naito, Special Seminar of COE in Particle Technology, 2006/06
  • Particle Bonding Technology for Advanced Materials, M. Naito, International Symposium on Minerals and Material Processing, 2006/06
  • Nanoparticle Bonding Technology for Composite Materials, M. Naito,H. Abe,K. Sato, CIMTEC 2006, 2006/06
  • 日本におけるナノパーティクルテクノロジーの最新動向, 内藤 牧男, ホソカワ粉体工学振興財団主催,アジア・ナノパーティクルテクノロジー・シンポジウム, 2006/04
  • 粒子設計と材料分野への展開, 内藤 牧男, (社)高温学会第44回合同委員会・講演会, 2005/03
  • ナノ粒子による粒子・材料設計とその応用, 内藤 牧男, 岐阜県セラミックス技術研究所主催平成16年度先端科学技術講演会, 2005/01
  • 粉体の構造制御と材料分野への応用, 内藤 牧男, 東北大学多元物質科学研究所主催特別講演会, 2004/12

Committee Memberships

  • The American Ceramic Society, Director, 2020/10 - Present
  • Smart Processing Society for Materials, Environment & Energy, Auditor, 2020/05 - Present
  • Information Center of Particle Technology, Japan, Director, 2019/06 - Present
  • The Society of Powder Technology, Japan, Auditor, 2019/03 - Present
  • The Association of Powder Process Industry and Engineering, Japan, Managing Director, 2018/05 - Present
  • World Academy of Ceramics, Advisory Board Member, 2018 - Present
  • The Association of Powder Process Industry and Engineering, Japan, Director, 2016/05 - Present
  • Hosokawa Powder Technology Foundation, Director, 2012/06 - Present
  • World Academy of Ceramics, Professional Academician Member, 2012 - Present
  • The American Ceramic Society, Fellow, 2010/10 - Present
  • The Sate Key Lab of Metal Matrix Composites, Shanghai Jiao Tong University, P.R.China, Guest Professor, 2009/12 - Present
  • Smart Processing Society for Materials, Environment & Energy, Director, 2012/04 - 2020/05
  • The Society of Powder Technology, Japan, President, 2018/01 - 2019/03
  • The Society of Powder Technology, Japan, President, 2015/02 - 2018/05
  • Shanghai Institute of Ceramics, P.R. China, Visiting Professor, 2014/10 - 2016/09
  • Hosokawa Micron Corporation, Director, 2005/12 - 2014/12
  • High Temperature Society, Director, 2009/05 - 2012/04
  • Kurimoto Ltd., Director, Institute of Nanotechnology and Materials Science, 2005/04 - 2007/11